BFT STOPPY MBB 500L / STOPPY MBB 700L - Electromechanical Automatic Bollards

Optional LED Light Crown, Size and Finish
  • From £3,163.33 Inc Vat
Item in Stock   |   Usually dispatched within 24 hours
Fast Next Day Delivery When Ordered Before 2 PM On Weekdays
OVER 25 YEARS Of Industry Experience
Guaranteed Safe Card Payments & Easy Returns

BFT STOPPY MBB 500L and STOPPY MBB 700L Electromechanical Automatic Bollard with optional Size (500mm x 219mm, 700mm x 219mm)  and Finish (RAL 7015, Stainless Steel)

This bollard is designed to work in extreme conditions with all metal parts cataphoresis-treated. The seal integrated into the flange is a new EPDM. These automatic bollards are built for high usage, with an internal oil-bath gear motor.

With a leading reputation in the gate automation industry leaders, all BFT products are built to exceptional standards and designed to be easy to install.

The Stoppy MBB electromechanical bollard has an LED light cap which fits perfectly into the floor flange, when the shaft is lowered. This reduces the risk of debris getting into the casing. 

The Stoppy MBB comes in two versions 500 mm or 700 mm in height and 219 mm diameter, all versions are equipped with an LED light crown and are available in two finishes: painted steel coloured RAL 7015 or stainless steel.

This bollard is compatible with the Perseo CBD control panel which can manage up to four bollards in parallel. This unit features a programming menu on the display with an integrated heating element and an incorporated receiver. 

Download our Stoppy MBB installation manual for further information.



 Stoppy MBB 500Stoppy MBB 700
Shaft diameter219mm219mm
Shaft height500mm700mm
Raising time6 secs9 secs
Control unitPerseo CBDPerseo CBD
Impact resistance8,000 Joule8,000 Joule
Breaking resistance150,000 Joule150,000 Joule
Frequency of use1500 op/day1500 op/day
Limit switchReed magnetic sensorReed magnetic sensor
Manual operationReversible with no powerReversible with no power
Protection ratingIP67IP67
Temperature range-25°C to 60°C-25°C to 60°C



1. Please select the bollard with your preferences above.

2. The BFT range of bollards require a specific Perseo CBE Bollard Controller (click or see bellow)

(NB. One controller can run up to 4 bollards together simultaneously, therefore one separate entrance and exit would require two controllers).

3. We recommend Mitto B Two Channel Transmitters (click or see bellow if required) for access control

4. We recommend PROCON loop detectors (click or see bellow if required), usually one loop detector per separate entrance or exit.

5. Loops detectors require specific loop cable (click or see bellow if required) in the ground, 100 metres is usually good enough for 3 or 4 small / medium loops.

6. Additional safety: we recommend traffic lights (click or see bellow), usually one traffic light per separate entrance or exit.

7. STOPPY MBB range requires back-up battery BATT-EB (click or see bellow)


If you are not satisfied with your purchase, please contact us by phone within 14 days of receipt of goods. Personalized or other customized products cannot be returned for refund or exchange under any circumstances unless stated otherwise at the time of purchase.

 If you need to return an item for any reason, the purchaser is responsible for the cost of the return carriage in any circumstances

We are open Monday - Friday, excluding bank holidays.

For orders received before 2 pm, we aim to deliver on a next day service

(This does not include any fabricated items)

*Please note there is a 15% restocking charge for all returns*

All transaction information passed between merchant sites and Sage Pay’s systems is encrypted using 128-bit SSL certificates. No cardholder information is ever passed unencrypted and any messages sent to your servers from Sage Pay are signed using MD5 hashing to prevent tampering. You can be completely assured that nothing you pass to Sage Pay’s servers can be examined, used or modified by any third parties attempting to gain access to sensitive information.


Once on our systems, all sensitive data is secured using the same internationally recognized 256-bit encryption standards used by, among others, the US Government. The encryption keys are held on state-of-the-art, tamper proof systems in the same family as those used to secure VeriSign's Global Root certificate, making them all but impossible to extract. The data we hold is extremely secure and we are regularly audited by the banks and banking authorities to ensure it remains so.