ROGER TECHNOLOGY BR21 Underground Brushless Single Kit - 36V

Product Overview The BR21 Underground Brushless Single Kit is an electromechanical underground motor designed for super intensive use. Operating on 36V, this irreversible motor features a native encoder onboard and is suitable for swing gates with leaves up to 3m, 4.5m, or 5m depending on the chosen option. The kit includes a foundation box (optional), a release system with standard lever, and an electronics kit. Key Features Single set Super intensive use Supports swing gates with leaves up to 3m, 4.5m, or 5m High speed option available 36V power supply Irreversible design Available with 2m or 10m cables Double bearing edition available What's in the Box Operator: 1x BR21/351, 1x BR21/361, 1x BR21/351/HS, 1x BR21/361/HS, or 1x BR21/362 Foundation box: 1x FU100 or FU101 (optional) Lever release system: 1x RL650 Control Panel: 1x EDGE1 Transmitters: 2x SYNUS/2 Plug In Radio Receiver: 1x H93/RX20/I Photocells: 1x M90/F4ESO Aerial: 1x R91/ANI/P1 Specifications SpecificationBR21/351BR21/361BR21/351/HSBR21/361/HSBR21/362 Power line supply 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V - 36V 24V - 36V 24V - 36V 24V - 36V 24V - 36V Power rating 200W 200W 200W 200W 200W Frequency of use Intensive Intensive Intensive Intensive Intensive Torque 50 - 300 N m 50 - 300 N m 50 - 200 N m 50 - 200 N m 50 - 300 N m Operating temperature -20 to +55°C -20 to +55°C -20 to +55°C -20 to +55°C -20 to +55°C Protection level IP67 IP67 IP67 IP67 IP67 Reductor Type Irreversible Irreversible Irreversible Irreversible Irreversible Manoeuvre speed 1.2 RPM 1.2 RPM 2 RPM 2 RPM 1.2 RPM Opening time 19-29 sec 19-29 sec 10-25 sec 10-25 sec 19-29 sec Limit switch Mechanical stoppers Mechanical stoppers Mechanical stoppers Mechanical stoppers Mechanical stoppers Recommended digital controllers EDGE1/BOX EDGE1/BOX EDGE1/BOX EDGE1/BOX EDGE1/BOX Encoder SENSORLESS 48 PPR SENSORLESS 48 PPR SENSORLESS 48 PPR SENSORLESS 48 PPR SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) 105° (optional 125° - 360°) 105° (optional 125° - 360°) 105° (optional 125° - 360°) 105° (optional 125° - 360°) Power supply cable length 2m 10m 2m 10m 10m Bearing on main shaft Standard Double bearings Standard Double bearings Double bearings Operating cycles per day (opening/closing - 24 hours no stop) 1300 1300 1300 1300 1300 Maximum dimension product (L x W x H) 345 x 224 x 144 mm 345 x 224 x 144 mm 345 x 224 x 144 mm 345 x 224 x 144 mm 345 x 224 x 144 mm

ROGER TECHNOLOGY BR21 Brushless Motor - 36V for Swing Gates

Product Overview The BR21 Brushless Motor is an advanced electromechanical underground motor designed for swing gates. Operating at 36V, this motor is ideal for super intensive use and comes with a native encoder onboard, making it a reliable choice for both residential and commercial applications. Available in various configurations to support swing gates with leaves up to 5m. Key Features Super intensive use Supports swing gates with leaf up to 3m / 4.5m / 5m (depending on chosen option) High Speed (HS) option available 36V power supply Irreversible operation 2m or 10m cable options Double bearing edition available Product Description The BR21 Brushless Motor is specifically engineered for high-performance swing gate automation. This motor is available in several versions to accommodate gates with leaves of varying lengths and weights, including high-speed and double-bearing options. The motor features a native encoder onboard for precise control and reliability. Specifications SpecificationBR21/351BR21/361BR21/351/HSBR21/361/HSBR21/362 Power line supply 230V AC - 50Hz Motor power supply 24V - 36V Power rating 200W Frequency of use Intensive Torque 50 - 300 Nm 50 - 300 Nm 50 - 200 Nm 50 - 200 Nm 50 - 300 Nm Operating temperature -20 to +55°C Protection level IP67 Reductor Type Irreversible Manoeuvre speed 1.2 RPM 1.2 RPM 2 RPM 2 RPM 1.2 RPM Opening time 19-29 sec 19-29 sec 10-25 sec 10-25 sec 19-29 sec Limit switch Mechanical stoppers Recommended digital controllers EDGE1/BOX Encoder SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) Power supply cable length 2m 10m 2m 10m 10m Bearing on main shaft Standard Standard Standard Standard Double bearings Operating cycles per day (opening/closing - 24 hours no stop) 1300 Maximum dimension product in mm (L x W x H) 345 x 224 x 144 Other Accessories Foundation Boxes and Lids FU100: Cold galvanized foundation box and lid. FU101: Hot galvanized foundation box and lid. FU102: Hot galvanized foundation box and AISI 304 stainless steel lid. FU103: AISI 304 stainless steel foundation box and lid. Levers and Release Systems LT300: Levers for opening up to 125°. LT301: Levers for opening up to 360°. RL650: Release system with standard lever. RL651: Release system with European cylinder key. RL663: Long release lever for underground. LT301/R: Levers for opening up to 360°, with reinforced chain. RL650/R: Release system with standard lever, reinforced steel version. LT300/90SX: Levers for opening up to 103° - 90° turned - left. LT300/90DX: Levers for opening up to 103° - 90° turned - right. LT327/SC: Pinion gear ¾ Z13 for adaptation in pinion combining ¾ Z16. Signboards R99/C/001: Signboard "Automatic Opening". R99/C/001AL: Signboard "Automatic Opening" Aluminium version. Hybrid Inverters B71/PBX36/BOX/115: Hybrid inverter, “Network Assisted” version, for 36V DC brushless digital controllers with a mains voltage of 115V AC. B71/PBX36/BOX: Same as above but for a mains voltage of 230V AC. B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for powering brushless digital controllers.

ROGER TECHNOLOGY BR21 Underground Brushless Pair Kit - 36v

Product Overview The BR21 Underground Brushless Pair Kit is a double set of BR21 BRUSHLESS electromechanical underground motors designed for super intensive use. With a native encoder onboard, this irreversible motor is ideal for swing gates with leaves up to 5m. The kit includes all necessary components for efficient and reliable gate automation, with options for different cable lengths and high-speed operation. Key Features Double set of brushless motors Super intensive use Suitable for swing gates with leaves up to 3m (HS) / 4.5m / 5m 36V motor power supply Irreversible motor Available in high-speed (HS) options Includes 2m or 10m cable options Protection level: IP67 Product Description The BR21 Underground Brushless Pair Kit is an advanced gate automation solution designed for swing gates with leaves up to 5m. The 36V brushless motors ensure super intensive use and long-lasting performance. The kit includes FU100 or FU101 foundation boxes, a lever release system, a control panel, transmitters, a plug-in radio receiver, photocells, and an aerial. The motors are available with different cable lengths and high-speed options to suit various installation requirements. Specifications SpecificationDetails Power line supply 230V AC - 50Hz Motor power supply 24V - 36V Power rating 200W Frequency of use Intensive Torque 50 - 300 Nm Operating temperature -20 to +55°C Protection level IP67 Reductor Type Irreversible Manoeuvre speed 1.2 RPM / 2 RPM (HS) Opening time 10-29 sec Limit switch Mechanical stoppers Encoder SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) Power supply cable length 2m / 10m Bearing on main shaft Standard / Double bearings Operating cycles per day 1300 Maximum dimension product (L x W x H) 345 x 224 x 144 mm What's in the Box ConfigurationComponents Short cables - 800kg 2x BR21/351 Long cables - 800kg 2x BR21/361 Short cables - High Speed - 500kg 2x BR21/351/HS Long cables - High Speed - 500kg 2x BR21/361/HS Long cable – Double bearing - 1000kg 2x BR21/362 Short and long cables - 800kg 1x BR21/351, 1x BR21/361 Short and long cables - High Speed - 800kg 1x BR21/351/HS, 1x BR21/361/HS Included Accessories 2x FU100 or FU101 (optional) foundation boxes 2x RL650 lever release system 1x EDGE1 control panel 2x SYNUS/2 transmitters 1x H93/RX20/I plug-in radio receiver 1x M90/F4ESO photocells 1x R91/ANI/P1 aerial