BFT SUB BT Twin Kit | Gates up to 2.5m Wide, 800kg | 24V Hydraulic Operators

Product Overview The BFT SUB BT Twin Kit is a robust and compact solution designed for very intensive use in residential, industrial, and multi-residence applications. This 24V hydraulic operator kit can automate swing gate leaves up to 2.5 meters wide and weighing up to 800kg. It includes everything needed for efficient and reliable gate automation. Key Features Range of 24V hydraulic operators for very intensive use Suitable for residential, industrial, and multi-residence applications Automates swing gate leaves up to 2.5m wide and 800kg in weight Compact and sturdy design Includes Thalia P control panel and receiver Comes with 2 Mitto radio transmitters Equipped with a pair of Compacta 180° photocells Includes a radio antenna Product Description Kit Components 2x SUB BT operators 1x Thalia P control panel & receiver 2x Mitto radio transmitters 1x Pair of Compacta 180° photocells 1x Radio antenna Specifications SpecificationDetails Power Supply 24V Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel Thalia Cycle Time 9° per sec Impact Reaction D-Track Protection Rating IP67 Temperature Range -20°C to 60°C Frequency of Use Very intensive Usage Instructions Install the BFT SUB BT Twin Kit by following the provided manual. Ensure the gate leaves do not exceed the maximum width and weight specifications. Pair the Mitto transmitters with the Thalia P control panel for seamless operation. Use the Compacta 180° photocells to enhance safety and prevent accidents. The radio antenna ensures reliable signal transmission for remote operation. Dimensions The components of the BFT SUB BT Twin Kit are compact and designed for easy installation and integration with existing gate structures. Safety and Maintenance Regularly check the hydraulic operators and control panel for optimal performance. Ensure the photocells are clean and unobstructed. Replace the batteries in the Mitto transmitters as needed. The IP67 protection rating ensures the components are protected against dust and water, but periodic maintenance is recommended to extend the lifespan of the kit.

BFT ELI BT A35 | Twin Kit for Gates up to 3.5m | 24v Motor

Product Overview The BFT ELI BT A35 Twin Kit is a fast electromechanical underground motor system designed for gates up to 3.5 meters in length and 100 kilograms per leaf (or up to 2.5 meters at 200 kilograms per leaf). This 24v system is ideal for residential or commercial properties seeking a reliable and efficient gate automation solution. An electric lock is required for gates exceeding 2 meters per leaf. This versatile kit also supports 180° operation with an additional accessory kit, providing enhanced flexibility and performance for various gate configurations. Key Features 24v fast electromechanical underground motor Supports gates up to 3.5m and 100kg per leaf, or 2.5m and 200kg per leaf Requires electric lock for gates over 2m per leaf Optional 180° operation with accessory kit Includes heavy-duty foundation boxes Comes with BFT THALIA control panel Includes two BFT Mitto RB 2-button transmitters Features safety photocells and antenna Manual release mechanism for emergencies Product Description The BFT ELI BT A35 Twin Kit offers a comprehensive gate automation solution for gates up to 3.5 meters in length and 100 kilograms per leaf. This system is powered by a 24v fast electromechanical underground motor, providing efficient and reliable performance for residential or commercial gates. For gates longer than 2 meters per leaf, an electric lock is necessary to ensure secure operation. This kit includes: 2 x BFT ELI BT A35 V Fast Electromechanical Underground Motors 2 x Heavy Duty Foundation Boxes 1 x BFT THALIA Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair of BFT Safety Photocells 1 x BFT Antenna 1 x Manual Release Mechanism With a power supply of 24v, the BFT ELI BT A35 Twin Kit is designed to handle gate leaves up to 3.5 meters and a maximum weight of 200 kilograms. The control panel, THALIA, manages the system's operations seamlessly, ensuring optimal performance. The system's quick opening time of just 11 seconds to 90° makes it one of the fastest in its class. The Eli A35 / A40 Kit Range offers various models to suit different needs: ModelVoltageMax leaf lengthMax leaf weightTime to open to 90° Eli AC A35 V Twin Kit 230V 3.5m 200kg 11 secs (no slowdown) Eli AC A40 Twin Kit 230V 4m 500kg 13 secs (no slowdown) Eli AC A35 V Single Kit 230V 3.5m 200Kg 11 secs (no slowdown) Eli AC A40 Single Kit 230V 4m 500Kg 13 secs (no slowdown) Eli BT A35 V Twin Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Twin Kit 24V 4m 500Kg 14 secs (with slowdown) Eli BT A35 V Single Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Single Kit 24V 4m 500Kg 14 secs (with slowdown)

BFT SUB GR Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator 180° Operation Non-Locking with Slow Down (2024)

Product Overview The SUB GR Twin Kit for Gates up to 1.8m is a powerful 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It accommodates swing gate leafs up to 1.8m wide and 800kg in weight, featuring 180° operation with non-locking capability and slowdown in both opening and closing. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for medium-sized gate installations. 180° Operation: Facilitates efficient swing gate automation. Non-Locking Mechanism: Requires a physical locking device for security. Slowdown in Both Directions: Enhances safety during gate operation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise gate movement. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB GR Twin Kit includes two 230V BFT Sub GR hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety measures, and an antenna for communication. Specifications SpecificationSUB GR Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 15 sec Operation 180° Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Slowdown Feature Both directions Frequency of Use Very Intensive Kit Includes 2x BFT Sub GR 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB GR Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB GE Twin Kit for Gates up to 2.5m | 230V Hydraulic Underground Operator 180° Operation Non-Locking

Product Overview The SUB GE Twin Kit for Gates up to 2.5m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features 180° operation, ideal for swing gate automation up to 2.5m wide and 800kg in weight. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 2.5m & 800kg: Accommodates medium to large gate installations. 180° Operation: Enables efficient swing gate automation. Non-Locking Mechanism: Requires a physical locking device for security. Heavy Duty Foundation Boxes: Ensures stability during installation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise operation. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB GE Twin Kit includes two 230V BFT Sub GE hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety measures, and an antenna for communication. Specifications SpecificationSUB GE Twin Kit Power Supply 230V Gate Leaf Length Up to 2.5m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 17 sec Operation 180° Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Frequency of Use Very Intensive Kit Includes 2x BFT Sub GE 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB GE Twin Kit for Gates up to 2.5m, please contact us or visit our website.

BFT SUB G Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator 180° Operation

Product Overview The SUB G Twin Kit for Gates up to 1.8m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features 180° operation, ideal for swing gate automation up to 1.8m wide and 800kg in weight. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Accommodates medium-sized gate installations. 180° Operation: Enables efficient swing gate automation. Hydraulic Lock: Provides enhanced security. Heavy Duty Foundation Boxes: Ensures stability during installation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise operation. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB G Twin Kit includes two 230V BFT Sub G hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety measures, and an antenna for communication. Specifications SpecificationSUB G Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 33 sec Operation 180° Impact Reaction Hydraulic Clutch Locking Requirement Hydraulic lock Frequency of Use Very Intensive Kit Includes 2x BFT Sub G 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB G Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB EL Twin Kit for Gates up to 3.5m | 230V Hydraulic Underground Operator Non-Locking

Product Overview The SUB EL Twin Kit for Gates up to 3.5m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features non-locking operation, making it suitable for applications where a physical locking device is required. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 3.5m & 800kg: Accommodates large gate sizes and weights. Non-Locking Operation: Requires a physical locking device for security. Heavy Duty Foundation Boxes: Provides stability during installation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise operation. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB EL Twin Kit includes two 230V BFT Sub EL hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety, and an antenna for communication. Specifications SpecificationSUB EL Twin Kit Power Supply 230V Gate Leaf Length Up to 3.5m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 33 sec Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Frequency of Use Very Intensive Kit Includes 2x BFT Sub EL 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB EL Twin Kit for Gates up to 3.5m, please contact us or visit our website.

BFT SUB ER Twin Kit for Gates up to 2.5m | 230V Hydraulic Underground Operator Non-Locking with Slowdown

Product Overview The SUB ER Twin Kit for Gates up to 2.5m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features non-locking operation and includes slowdown mechanisms for both opening and closing cycles. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 2.5m & 800kg: Accommodates various gate sizes and weights. Non-Locking Operation: Requires a physical locking device for security. Slowdown on Opening & Closing: Enhances safety and control. Heavy Duty Foundation Boxes: Provides stability during installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 14 seconds + slowdown. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for high-frequency operation. Product Description The SUB ER Twin Kit includes two 230V BFT Sub ER hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety, and an antenna for communication. Specifications SpecificationSUB ER Twin Kit Power Supply 230V Gate Leaf Length Up to 2.5m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 14 sec + slowdown Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Frequency of Use Very Intensive Kit Includes 2x BFT Sub ER 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB ER Twin Kit for Gates up to 2.5m, please contact us or visit our website.

BFT SUB E Twin Kit for Gates up to 2.5m | 230V Hydraulic Underground Operator Non-Locking

Product Overview The SUB E Twin Kit for Gates up to 2.5m offers a reliable 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features non-locking operation, making it ideal for frequent access scenarios. Key Features 230V Power Supply: Ensures robust performance. Suitable for Gates Up to 2.5m & 800kg: Accommodates various gate sizes and weights. Non-Locking Operation: Requires a physical locking device for security. Heavy Duty Foundation Boxes: Provides stable installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 24 seconds. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for high-frequency operation. Product Description The SUB E Twin Kit includes two 230V BFT Sub E hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, along with safety photocells and an antenna for enhanced safety and convenience. Specifications SpecificationSUB E Twin Kit Power Supply 230V Gate Leaf Length Up to 2.5m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 24 sec Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Frequency of Use Very Intensive Kit Includes 2x BFT Sub E 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB E Twin Kit for Gates up to 2.5m, please contact us or visit our website.

BFT SUB R Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator with Slow Down

Product Overview The SUB R Twin Kit for Gates up to 1.8m offers a robust 230V hydraulic underground operator solution designed for very intensive use in residential, industrial, or multi-residence environments. It features slowdown functionality for both opening and closing, ensuring precise and controlled gate operation. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for various gate sizes and weights. Hydraulic Lock: Provides secure operation. Slowdown in Both Directions: Ensures smooth and controlled gate movement. Heavy Duty Foundation Boxes: Provides stable installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 14 seconds. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for frequent operation. Product Description The SUB R Twin Kit includes two 230V BFT Sub R hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, along with safety photocells and an antenna for enhanced safety and convenience. Specifications SpecificationSUB R Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 14 sec Impact Reaction Hydraulic Clutch Slowdown Feature Yes, in both directions Frequency of Use Very Intensive Kit Includes 2x BFT Sub R 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB R Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator

Product Overview The SUB Twin Kit for Gates up to 1.8m offers a robust 230V hydraulic underground operator solution designed for very intensive use in residential, industrial, or multi-residence environments. Capable of automating swing gate leafs up to 1.8 meters wide and weighing up to 800kg, it features a hydraulic lock for secure operation. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for various gate sizes and weights. Heavy Duty Foundation Boxes: Provides stable installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 24 seconds. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for frequent operation. Product Description The SUB Twin Kit includes two 230V BFT Sub hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, along with safety photocells and an antenna for enhanced safety and convenience. Specifications SpecificationSUB Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 24 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 2x BFT Sub 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT Phobos BT B40 | 4m Long Stroke Twin Kit (24V) | Swing Gates Up to 4m & 500kg

*** Please note, this kit is supplied with Weld on Post brackets only *** For adjustable bolt on post brackets please use the following links: BFT SFR-B Standard Bolt on Post Bracket BFT SFR-B-L Long Stroke Post Bracket     Product Overview The Phobos BT B40 4m Long Stroke Twin Kit is a 24V electromechanical swing gate operator designed for residential use. This robust operator is capable of handling swing gate leaves up to 4 meters wide and weighing up to 500kg. Featuring a high-speed, almost silent operation, the Phobos BT B40 provides a reliable and efficient solution for automating your swing gates. The motor is irreversible and comes with a manual release accessed via a simple triangular key locking system. Built-in obstacle detection is provided through the D-Track torque management system. Key Features Handles Gates Up to 4m & 500kg: Suitable for residential use. High-Speed Opening and Closing: Ensures quick and efficient operation. Silent Operation: Minimizes noise for a quieter environment. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Exclusive Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Product Description The Phobos BT B40 4m Long Stroke Twin Kit is engineered to automate swing gates up to 4 meters in length and 500kg in weight per leaf. Ideal for residential properties, this 24V gate operator offers robust performance with fast and silent operation. The exclusive Hi-Tech design ensures that the Phobos BT B40 is not only functional but also stylish, fitting seamlessly into various installation conditions, even with limited space or thick pillars. The 24V technology combined with electronic control helps to keep people safe from impacts without needing additional safety devices. The D-Track technology increases the safety of the automation by ensuring the thrust applied is the minimum necessary to ensure movement, adapting to changes in usage and environmental conditions, thus reducing maintenance operations. The Phobos BT B40 features easy-to-adjust limit switches, positioned at the top of the motor, with a patented vibration or flashing light feedback function, simplifying the installation process. The motor's fast opening and closing speeds dramatically reduce waiting times, making entry to the property quicker and safer. The unit can also be fitted with BFT’s optional BT BAT buffer battery kit, allowing for continued automation in case of a temporary dip in mains power. Specifications SpecificationPHOBOS BT B40 Board Power Supply 230 V Control Unit THALIA BT A80 Operator Type Electromechanically operated swing gates Operator Weight 5.2 kg Max. Width of Door/Gate Wing 4 m Max. Length Gate Panel Without Electric Lock 3 m Max. Weight of Door/Gate Wing 700 kg Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 470 mm Maximum Angle 130° Movement Time (90°, Excluding Slowdown, with Maximum Gate Size and Weight) Approx. 16 s Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Kit Includes 2x BFT Phobos BT B40 24V Electromechanical Operators 1x BFT THALIA L Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITPHOBOSACB25SGL: Phobos AC B25 2.5m Standard Stroke Single Kit (230V) KITPHOBOSBTB25SGL: Phobos BT B25 2.5m Standard Stroke Single Kit (24V) KITPHOBOSBTB40SGL: Phobos BT B40 4m Long Stroke Single Kit (24V) KITPHOBOSACB50SGL: Phobos AC B50 5m Long Stroke Single Kit (230V) KITPHOBOSACB25: Phobos AC B25 2.5m Standard Stroke Twin Kit (230V) KITPHOBOSBTB25: Phobos BT B25 2.5m Standard Stroke Twin Kit (24V) KITPHOBOSBTB40: Phobos BT B40 4m Long Stroke Twin Kit (24V) KITPHOBOSACB50: Phobos AC B50 5m Long Stroke Twin Kit (230V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Phobos AC B50 | 5m Long Stroke Twin Kit (230V) | Swing Gates Up to 5m & 500kg

*** Please note, this kit is supplied with Weld on Post brackets only *** For adjustable bolt on post brackets please use the following links: BFT SFR-B Standard Bolt on Post Bracket BFT SFR-B-L Long Stroke Post Bracket   Product Overview The Phobos AC B50 5m Long Stroke Twin Kit is a 230V electromechanical swing gate operator designed for residential use. This robust operator is capable of handling swing gate leaves up to 5 meters wide and weighing up to 500kg. Featuring a high-speed, almost silent operation, the Phobos AC B50 provides a reliable and efficient solution for automating your swing gates. The motor is irreversible, ensuring secure locking, and comes with a manual release accessed via a simple triangular key locking system. Key Features Handles Gates Up to 5m & 500kg: Suitable for residential use. High-Speed Opening and Closing: Ensures quick and efficient operation. Silent Operation: Minimizes noise for a quieter environment. Exclusive Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Irreversible Motor: Provides secure locking, preventing unauthorized access. Manual Release: Simple triangular key locking system for manual operation. Product Description The Phobos AC B50 5m Long Stroke Twin Kit is engineered to automate swing gates up to 5 meters in length and 500kg in weight per leaf. Ideal for residential properties, this 230V gate operator offers robust performance with its high-speed, almost silent operation. The exclusive Hi-Tech design ensures that the Phobos AC B50 is not only functional but also stylish, fitting seamlessly into various installation conditions, even with limited space or thick pillars. The motor's irreversibility ensures secure locking, while the manual release feature, accessible via a simple triangular key locking system, allows for manual operation in case of emergencies. The Easy Set App aids installers in determining the correct positions for installation, achieving the desired opening angle and smooth movement. For added convenience, the Phobos AC B50 is equipped with a work time limit switch and an electronic clutch for impact reaction, ensuring safe and reliable operation. The kit includes everything needed for installation, making it a comprehensive solution for your swing gate automation needs. Specifications SpecificationPHOBOS AC B50 Board Power Supply 230 V Control Unit RIGEL 6 Operator Weight 7.7 kg Operator Type Electromechanically operated swing gates Max. Weight of Door/Gate Wing 500 kg Max. Width of Door/Gate Wing 5 m Max. Length Gate Panel Without Electric Lock 3 m Motor Voltage 230 V Power Consumption 210 W Thrust and Traction Force 2000 N Useful Rod Stroke 470 mm Maximum Angle 130° Movement Time (90°, Excluding Slowdown, with Maximum Gate Size and Weight) Approx. 22 s Type of Limit Switch Work time Slowdown Yes Impact Reaction Electronic clutch Locking Mechanical Release Personal key Max. Opening Cycles per Hour 30 Kit Includes 2x BFT Phobos AC B50 230V Electromechanical Operator 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITPHOBOSACB25SGL: Phobos AC B25 2.5m Standard Stroke Single Kit (230V) KITPHOBOSBTB25SGL: Phobos BT B25 2.5m Standard Stroke Single Kit (24V) KITPHOBOSBTB40SGL: Phobos BT B40 4m Long Stroke Single Kit (24V) KITPHOBOSACB50SGL: Phobos AC B50 5m Long Stroke Single Kit (230V) KITPHOBOSACB25: Phobos AC B25 2.5m Standard Stroke Twin Kit (230V) KITPHOBOSBTB25: Phobos BT B25 2.5m Standard Stroke Twin Kit (24V) KITPHOBOSBTB40: Phobos BT B40 4m Long Stroke Twin Kit (24V) KITPHOBOSACB50: Phobos AC B50 5m Long Stroke Twin Kit (230V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

DEA STING KIT | Electromechanical Swing Gate Kit |Twin, Up to 3m & 400kg

Product Overview The DEA STING KIT is an electromechanical kit designed for swing gates up to 3 meters in length and 400 kg in weight. Ideal for residential or apartment complexes, the STING automation kit ensures smooth and reliable gate movement without the need for additional ground stops. The embedded mechanical stops simplify installation and eliminate potential obstacles, making this kit a versatile and practical solution for various gate configurations. Key Features Suitable for swing gates up to 3 meters long and 400 kg Embedded mechanical stops for seamless operation Adjustable fastening plates for versatile installation Robust construction with metal gears and aluminum and steel components Safe and precise movement with magnetic or digital encoder Manual override with special key in case of power failure Smartphone control with DEAuser APP and NET-COM Fast and agile installation Product Description The DEA STING KIT offers a comprehensive solution for automating swing gates up to 3 meters and 400 kg. Designed for both residential and apartment complexes, this kit provides robust performance and versatility, ensuring smooth operation in various installation scenarios. The adjustable fastening plates allow the motor to adapt to different column structures and available space, making it a flexible choice for many applications. The STING motor's embedded mechanical stops eliminate the need for additional ground stops, streamlining the installation process and reducing potential obstacles for vehicles. Constructed with high-quality materials, including metal gears and aluminum and steel components, the STING motor is built to withstand mechanical wear and time, ensuring long-lasting reliability. Safety and precision are paramount with the STING automation kit. The motor is equipped with a movement reading system using a magnetic or digital encoder, which controls the gate's movement, detects obstacles, and reverses direction if necessary. This, combined with external safety accessories like photocells and safety edges, ensures reliable and secure operation. In the event of a power failure, the STING motor can be manually unlocked and operated using a special key, ensuring you are never locked in or out of your property. Additionally, the DEAuser APP allows you to control the gate with your smartphone, and with the NET-COM module and a data SIM, you can check the automation status remotely. The STING KIT is available in several models to suit different power requirements and usage intensities: STING: 230V motor for residential use, suitable for gate leaves up to 3m length STING/24: 24V motor for semi-intensive use, suitable for gate leaves up to 3m length STING/24-BOOST (37 mm/s): 24V motor for semi-intensive use, faster operation for gate leaves up to 3m length Specifications Technical InfoSTINGSTING/24STING/24-BOOST Motor power supply (V) 230V ~ ± 10 % (50/60 Hz) 24V 24V Maximum power absorption (W) 300 60 85 Max thrust (N) 1650 1000 Time with total stroke (s) 21 22 9 90° Opening time (s) 16 9 Duty cycle (cycles/hour) 18 40 N. max cycles in 24h 90 Built-in capacitor (μF) 8 Operating temperature (°C) -20 ÷ 50 Motor thermal protection (°C) 150 Weight with packing (Kg) 8.8 Sound pressure (dBA) < 70 Protection level IPX4 Kit Includes 2 x STING/STING/24/STING/24-BOOST motors (depending on kit model) 1 x NET230N/C or NET24N/C control unit (depending on motor model) 1 x LINEAR or LINEAR/XS (pair) photocells 1 x AURA/N flashing light 2 x GTI2 remote controls 1 x 127 aerial

ROGER TECHNOLOGY BR21 Underground Brushless Pair Kit - 36v

Product Overview The BR21 Underground Brushless Pair Kit is a double set of BR21 BRUSHLESS electromechanical underground motors designed for super intensive use. With a native encoder onboard, this irreversible motor is ideal for swing gates with leaves up to 5m. The kit includes all necessary components for efficient and reliable gate automation, with options for different cable lengths and high-speed operation. Key Features Double set of brushless motors Super intensive use Suitable for swing gates with leaves up to 3m (HS) / 4.5m / 5m 36V motor power supply Irreversible motor Available in high-speed (HS) options Includes 2m or 10m cable options Protection level: IP67 Product Description The BR21 Underground Brushless Pair Kit is an advanced gate automation solution designed for swing gates with leaves up to 5m. The 36V brushless motors ensure super intensive use and long-lasting performance. The kit includes FU100 or FU101 foundation boxes, a lever release system, a control panel, transmitters, a plug-in radio receiver, photocells, and an aerial. The motors are available with different cable lengths and high-speed options to suit various installation requirements. Specifications SpecificationDetails Power line supply 230V AC - 50Hz Motor power supply 24V - 36V Power rating 200W Frequency of use Intensive Torque 50 - 300 Nm Operating temperature -20 to +55°C Protection level IP67 Reductor Type Irreversible Manoeuvre speed 1.2 RPM / 2 RPM (HS) Opening time 10-29 sec Limit switch Mechanical stoppers Encoder SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) Power supply cable length 2m / 10m Bearing on main shaft Standard / Double bearings Operating cycles per day 1300 Maximum dimension product (L x W x H) 345 x 224 x 144 mm What's in the Box ConfigurationComponents Short cables - 800kg 2x BR21/351 Long cables - 800kg 2x BR21/361 Short cables - High Speed - 500kg 2x BR21/351/HS Long cables - High Speed - 500kg 2x BR21/361/HS Long cable – Double bearing - 1000kg 2x BR21/362 Short and long cables - 800kg 1x BR21/351, 1x BR21/361 Short and long cables - High Speed - 800kg 1x BR21/351/HS, 1x BR21/361/HS Included Accessories 2x FU100 or FU101 (optional) foundation boxes 2x RL650 lever release system 1x EDGE1 control panel 2x SYNUS/2 transmitters 1x H93/RX20/I plug-in radio receiver 1x M90/F4ESO photocells 1x R91/ANI/P1 aerial

SEA AUTOMATION Field 600 Oil UK Paired Kit Swing 2 DG - FIELDKIT | Electromechanical Underground Operator | Adjustable Slowdown, 3.5m Leaves

Product Overview The Field 600 Oil UK Paired Kit Swing 2 DG - FIELDKIT is an electromechanical underground non-reversing operator in an oil bath, designed for residential swing leaves with a single-leaf length of up to 3.5 meters or a maximum weight of 600 kg. This kit is ideal for intensive use in residential settings, offering reliable and smooth gate operation. Product Description The Field 600 Oil UK Paired Kit features an electromechanical underground operator that ensures smooth and efficient gate movements. The operator is equipped with an adjustable slowdown mechanism for both opening and closing, enhancing safety and control. The universal right/left operator design allows for versatile installation, and adjustable mechanical stops provide precise control over gate positioning. The kit can be upgraded with an optional electronic limit switch kit for advanced control. Additionally, a 180° version with chain transmission is available upon request. Emergency batteries and a solar panel kit (KIT SUNNY) can also be applied for backup power, ensuring continuous operation even during power outages. Key Features Electromechanical underground operator in oil bath Handles gate leaves up to 3.5 meters in length and 600 kg in weight Adjustable slowdown in opening and closing Universal right/left operator Adjustable mechanical stops in closing and opening Optional electronic limit switch kit available 180° version with chain transmission available on request Emergency batteries and solar panel kit compatible OIL Plus version with machined steel gear crown What's in the Box 2 x Motors 2 x Foundation Boxes 2 x Remote Transmitters 1 x Control Board 1 x Receiver 1 x Radio Card 1 x Pair of Photocells Specifications Power Supply: 230v Gate Leaf Length: Up to 3.5 meters Max Leaf Weight: 600kg Control Panel: GATE 2 DG or USER 2-24V DG Cycle Time (through 90°): Adjustable Impact Reaction: Adjustable slowdown Frequency of Use: Intensive Optional Features: Electronic limit switch kit, 180° chain transmission, emergency batteries, solar panel kit

SEA AUTOMATION Field 250 Standard UK Paired Kit Swing 2 DG - 12301110UK | Electromechanical Underground Operator | Residential Use, Adjustable Slowdown

Product Overview The Field 250 Standard UK Paired Kit Swing 2 DG - 12301110UK is an electromechanical underground non-reversing operator in an oil bath, designed for residential swing leaves with a single-leaf length of up to 3.5 meters or a maximum weight of 600 kg. This kit is ideal for intensive use in residential settings, offering reliable and smooth gate operation. Product Description The Field 250 Standard UK Paired Kit features an electromechanical underground operator that ensures smooth and efficient gate movements. The operator is equipped with an adjustable slowdown mechanism for both opening and closing, enhancing safety and control. The universal right/left operator design allows for versatile installation, and adjustable mechanical stops provide precise control over gate positioning. The kit can be upgraded with an optional electronic limit switch kit for advanced control. Additionally, a 180° version with chain transmission is available upon request. Emergency batteries and a solar panel kit (KIT SUNNY) can also be applied for backup power, ensuring continuous operation even during power outages. Key Features Electromechanical underground operator in oil bath Handles gate leaves up to 3.5 meters in length and 600 kg in weight Adjustable slowdown in opening and closing Universal right/left operator Adjustable mechanical stops in closing and opening Optional electronic limit switch kit available 180° version with chain transmission available on request Emergency batteries and solar panel kit compatible OIL Plus version with machined steel gear crown What's in the Box 2 x Motors 2 x Foundation Boxes 2 x Remote Transmitters 1 x Control Board 1 x Receiver 1 x Radio Card 1 x Pair of Photocells Specifications Power Supply: 230v Gate Leaf Length: Up to 3.5 meters Max Leaf Weight: 600kg Control Panel: GATE 2 DG or USER 2-24V DG Cycle Time (through 90°): Adjustable Impact Reaction: Adjustable slowdown Frequency of Use: Intensive Optional Features: Electronic limit switch kit, 180° chain transmission, emergency batteries, solar panel kit

SEA AUTOMATION SEA Alpha 330 Plus Paired UK Kit | 400mm Stroke Swing Gate Operator with Limits | Complete Kit - ALPHA+KIT

Product Overview The SEA Alpha 330 Plus Paired UK Kit offers a comprehensive solution for swing gate automation. Featuring a 400mm stroke with limit switches and designed for domestic and light commercial use, this complete kit includes all necessary components for installation and operation, ensuring a reliable and efficient gate system. Product Description The Alpha 330 Plus Paired UK Kit from SEA is an electromechanical, irreversible operator suitable for both main and low voltage applications. Designed for domestic and light commercial use, it can handle gate leaves up to 5.5 meters and opens gates to an angle of up to 120 degrees. The kit includes two rams, a pair of photocells, a radio receiver, and two remote transmitters, making it a complete package for your gate automation needs. The operator features adjustable limit switches, a simple lever-operated manual release system, and a bushed rear bracket with a brass rear fixing bolt. Additionally, a fully adjustable non-weld rear bracket is available for enhanced flexibility. Key Features 400mm stroke with limit switches for precise control Electromechanical design for durability and reliability Adjustable limit switches Simple lever-operated manual release system Bushed rear bracket with brass rear fixing bolt Fully adjustable non-weld rear bracket available Opens gates up to an angle of 120 degrees Suitable for domestic and light commercial use What's in the Box 2x SEA Alpha 330 Rams 1x Pair of photocells 1x Radio receiver 2x Remote transmitters Specifications Model: SEA Alpha 330 Plus Paired UK Kit Stroke: 400mm Operation: Electromechanical, irreversible Max Leaf Length: 5.5 meters Opening Angle: Up to 120 degrees Limit Switches: Adjustable Release System: Lever-operated manual release Bracket: Bushed rear bracket with brass rear fixing bolt, fully adjustable non-weld rear bracket available Usage: Domestic and light commercial

SEA AUTOMATION SEA Alpha 330 UK Paired Kit | 400mm Stroke Swing Gate Operator | Full Kit - ALPHAKIT

Product Overview The SEA Alpha 330 UK Paired Kit provides a comprehensive solution for swing gate automation. Featuring a 400mm stroke and designed for domestic and light commercial use, this full kit includes everything needed for installation and operation, ensuring a reliable and efficient gate system. Product Description The Alpha 330 UK Paired Kit from SEA is an electromechanical, irreversible operator suitable for both main and low voltage applications. Designed for domestic and light commercial use, it can handle gate leaves up to 5.5 meters and opens gates to an angle of up to 120 degrees. The kit includes two rams, a pair of photocells, a radio receiver, and two remote transmitters, making it a complete package for your gate automation needs. The operator features adjustable limit switches, a simple lever-operated manual release system, and a bushed rear bracket with a brass rear fixing bolt. Additionally, a fully adjustable non-weld rear bracket is available for enhanced flexibility. Key Features 400mm stroke for various gate sizes Electromechanical design for durability and reliability Adjustable limit switches Simple lever-operated manual release system Bushed rear bracket with brass rear fixing bolt Fully adjustable non-weld rear bracket available Opens gates up to an angle of 120 degrees Suitable for domestic and light commercial use What's in the Box 2x SEA Alpha 330 Rams 1x Pair of photocells 1x Radio receiver 2x Remote transmitters Specifications Model: SEA Alpha 330 UK Paired Kit Stroke: 400mm Operation: Electromechanical, irreversible Max Leaf Length: 5.5 meters Opening Angle: Up to 120 degrees Limit Switches: Adjustable Release System: Lever-operated manual release Bracket: Bushed rear bracket with brass rear fixing bolt, fully adjustable non-weld rear bracket available Usage: Domestic and light commercial

SEA AUTOMATION SEA SURF350KIT | Complete Swing Gate Kit with Electronic & Mechanical Limits | For Gates Up to 3.5m, 250-300kg

Product Overview The SEA SURF350KIT is a comprehensive swing gate kit designed for residential use. This kit is suitable for gate leaves up to 3.5 meters in length and weighing between 250 to 300 kg. It features both electronic and mechanical limit switches, ensuring precise and reliable operation. Product Description The SURF350KIT includes all necessary components for a robust and efficient swing gate automation solution. The kit is compatible with current sensing control panels and features built-in physical stops and limit switches, providing enhanced functionality and safety. The electromechanical design ensures durability and long-lasting performance, making it ideal for residential applications. Key Features Complete swing gate kit with electronic and mechanical limits Supports gate leaves up to 3.5 meters in length and 250-300 kg in weight Compatible with current sensing control panels Built-in physical stops and limit switches Electromechanical design for reliable operation Designed for residential use What's in the Box 2x Surf rams 1x Pair of photocells 1x Control board 2x Remote transmitters 1x Receiver 1x Antenna Specifications Model: SEA SURF350KIT Gate Compatibility: Up to 3.5 meters in length, 250-300 kg weight Limit Switches: Electronic and mechanical Control Panel Compatibility: Current sensing Operation: Electromechanical Usage: Residential

SEA AUTOMATION SEA SURF250KIT | Complete Swing Gate Kit | For Gates Up to 4.5m, 230V

Product Overview The SEA SURF250KIT is a complete swing gate kit designed for residential use, capable of handling gate leaves up to 4.5 meters in length and weighing between 250 to 300 kg. This kit includes everything needed for a reliable and efficient gate automation solution. Product Description The SURF250KIT provides a comprehensive set of components for swing gate automation. It includes two SURF 250 Electromechanical Operators, a SWING 2 DG electronic control unit with a 433 MHz receiver, and a Roll PLUS 433 MHz transmitter. Additionally, the kit features an antenna kit for the FLASH flashing light, an ASTER key button, a pair of SUNSET photocells, a flashing LED FLASH, and a warning sign. The operators are made from die-cast aluminum with a weather-resistant polyester paint finish, ensuring durability and long-lasting performance. The SURF 250 operators come with built-in physical stops and are compatible with current sensing control panels. The SURF 350 variant includes built-in limit switches for enhanced functionality. Key Features Complete swing gate kit for gates up to 4.5 meters in length Supports gate weights between 250 to 300 kg Includes 2 SURF 250 Electromechanical Operators SWING 2 DG electronic control unit with 433 MHz receiver Roll PLUS 433 MHz transmitter Antenna kit for FLASH flashing light ASTER key button Pair of SUNSET photocells Flashing LED FLASH Warning sign included Die-cast aluminum body with weather-resistant polyester paint Built-in physical stops (included with 350) Built-in limit switches (350 only) Electromechanical operation Designed for residential use What's in the Box 2 pcs SURF 250 Electromechanical Operators 1 pc SWING 2 DG electronic control unit and 433 MHz receiver 1 pc Roll PLUS 433 MHz transmitter 1 pc Antenna Kit for FLASH flashing light 1 pc ASTER key button 1 pc pair of SUNSET photocells 1 pc Flashing LED FLASH 1 pc Warning sign Specifications Model: SEA SURF250KIT Gate Compatibility: Up to 4.5 meters in length, 250 to 300 kg weight Motor Voltage: 230 V Body Material: Die-cast aluminum Finish: Weather-resistant polyester paint Control Unit: SWING 2 DG electronic control unit with 433 MHz receiver Transmitter: Roll PLUS 433 MHz Additional Features: Built-in physical stops, limit switches (350 only) Photocells: SUNSET pair LED Light: FLASH Usage: Residential

SEA AUTOMATION SEA Full Tank 270 AC UK Kit Paired c/w Gate 2 DG - FTKIT | Hydraulic Gate Operator | Industrial Use

Product Overview The Full Tank 270 AC UK Kit paired with Gate 2 DG - FTKIT is the strongest SEA hydraulic operator, ideal for industrial use with almost continuous operation. It can quietly and reliably handle gates with a maximum leaf length of 7000mm and up to 1000kg in weight, making it perfect for heavy-duty applications. Product Description Designed for industrial settings, the Full Tank hydraulic operator excels in managing large and heavy gates with ease. For gate leaves exceeding 2200mm, additional security can be achieved with the inclusion of electromagnetic or electromechanical locks. The Full Tank range is compatible with high-security 2000 kg force hook locks. Twin Full Tank operators can be installed on each gate leaf to ensure consistent operation in very windy conditions, making it ideal for the most secure industrial sites. Key Features Handles gate leaves up to 7000mm in length and 1000kg in weight Suitable for industrial use with almost continuous operation Quiet and reliable performance Additional security with electromagnetic or electromechanical locks for gate leaves over 2200mm Compatible with high-security 2000 kg force hook locks Option to use twin operators for each gate leaf in windy conditions Ensures consistent operation in high-security industrial sites What's in the Box 2 x Full Tank 270 AC Hydraulic Gate Operators 1 x Control board 1 x Photocells 2 x Remote transmitters 1 x Radio antenna Installation materials User manual Specifications Max gate leaf length: 7000mm Max gate weight: 1000kg Hydraulic operation for industrial use Suitable for almost continuous operation Enhanced security options for large gate leaves Compatible with high-security locks Twin operator installation option for windy conditions

SEA AUTOMATION Half Tank 270 AC UK Kit Paired Swing 2 Amp 1L - HTPKIT | Hydraulic Swing Operator | Commercial Use

Product Overview The Half Tank 270 AC UK Kit Paired Swing 2 Amp 1L - HTPKIT is a hydraulic swing operator suitable for commercial and light industrial use. It is capable of handling up to 55 opening cycles per hour, making it ideal for high-traffic areas. With three pump versions to alter operating speeds and three operator lengths, it can be used for pedestrian gates or gate leaves up to 7000mm in length and 700kg in weight. Product Description Designed for condominium use, the Half Tank is one of the most secure operators on the market, featuring a key manual release. It offers extremely silent operation and hydraulic reliability. Anti-crushing is guaranteed through by-pass valves for maximum thrust setting. The operator includes a standard ball joint for precise stroke adjustment and an aluminium oscillating back fixing fork. Available in multiple versions: (AC) lock in opening/closing, (SB) without lock, (SC) in closing only, and (SA) in opening only. Key Features Handles up to 55 opening cycles per hour Suitable for gate leaves up to 7000mm in length and 700kg in weight Extremely silent operation Hydraulic reliability Anti-crushing guaranteed through by-pass valves Standard ball joint for precise stroke adjustment Standard aluminium oscillating back fixing fork Multiple locking versions available 20 mm rod diameter Piston stroke options: 270 mm or 390 mm Metal standard release PLUS for 390 mm version Round joint for stroke adjustment Optional "PG" models with standard POSITION GATE What's in the Box 2 x Half Tank 270 AC Hydraulic Swing Operators 1 x Control Board 1 x Pair of Photocells 2 x Remote Transmitters 1 x Radio Antenna Installation materials User manual Specifications Suitable for commercial and light industrial use Opening cycles: Up to 55 per hour Gate leaf length: Up to 7000mm Gate weight: Up to 700kg Rod diameter: 20 mm Piston stroke: 270 mm or 390 mm Locking versions: AC, SB, SC, SA Hydraulic slowdown available on request Standard ball joint and aluminium oscillating back fixing fork Optional "PG" models with standard POSITION GATE

SEA AUTOMATION MINI + PKIT Mini Tank AC UK Kit Paired Swing 2 Amp - MINI+PKIT

MINI + PKIT Mini Tank AC UK Kit Paired Swing 2 Amp - MINI+PKIT Product Overview The MINI + PKIT Mini Tank AC UK Kit is a robust and reliable swing gate operator kit designed for efficient operation. This kit is ideal for those seeking a high-performance solution for their swing gates, featuring paired swing 2 amp operators and comprehensive control accessories. Product Description Designed with oil lubrication of all mechanical components, the MINI + PKIT Mini Tank AC UK Kit ensures smooth and long-lasting performance. It features a mechanical internal stop device for precise end-of-stroke position management (optional), and external hydraulic locks for easy replacement. Available in versions with lock-in opening and closing (AC), with a lock only in closing (SC), or without lock (SB). The kit includes a stroke of 270 mm and a rod diameter of 16 mm, along with a release system with SEA personalized key. The "PG" models are available on request, with the standard Position Gate. Additionally, the POSITION GATE KIT (code 12711076) is available for the MINI TANK TOP. Key Features Oil lubrication of all mechanical components Mechanical internal stop device for precise end-of-stroke position management (optional) External hydraulic locks for easy replacement Version options: lock-in opening and closing (AC), lock only in closing (SC), or without lock (SB) Stroke: 270 mm Rod diameter: 16 mm Release system with SEA personalized key Optional "PG" models with standard Position Gate Optional POSITION GATE KIT (code 12711076) for MINI TANK TOP What's in the Box 2 operators 1 pair of photo cells 1 control board 2 remote transmitters 1 radio antenna Specifications Stroke: 270 mm Rod diameter: 16 mm Control board included Photo cells included Remote transmitters: 2 included Radio antenna included

SEA AUTOMATION Mini Tank SC UK Kit Paired Swing 2 Amp - MINIPKIT

Mini Tank SC UK Kit Paired Swing 2 Amp - MINIPKIT Product Overview The Mini Tank SC UK Kit is a robust and reliable swing gate operator kit designed for efficient operation. This kit is ideal for those seeking a high-performance solution for their swing gates, featuring paired swing 2 amp operators and comprehensive control accessories. Product Description Designed with oil lubrication of all mechanical components, the Mini Tank SC UK Kit ensures smooth and long-lasting performance. It features a mechanical internal stop device for precise end-of-stroke position management (optional), and external hydraulic locks for easy replacement. Available in versions with lock-in opening and closing (AC), with a lock only in closing (SC), or without lock (SB). The kit includes a stroke of 270 mm and a rod diameter of 16 mm, along with a release system with SEA personalized key. The "PG" models are available on request, with the standard Position Gate. Additionally, the POSITION GATE KIT (code 12711076) is available for the MINI TANK TOP. Key Features Oil lubrication of all mechanical components Mechanical internal stop device for precise end-of-stroke position management (optional) External hydraulic locks for easy replacement Version options: lock-in opening and closing (AC), lock only in closing (SC), or without lock (SB) Stroke: 270 mm Rod diameter: 16 mm Release system with SEA personalized key Optional "PG" models with standard Position Gate Optional POSITION GATE KIT (code 12711076) for MINI TANK TOP What's in the Box 2 operators 1 pair of photo cells 1 control board 2 remote transmitters 1 radio antenna Specifications Stroke: 270 mm Rod diameter: 16 mm Control board included Photo cells included Remote transmitters: 2 included Radio antenna included

Fadini COMBI 740 | Underground Kit | 110° Rotation, Double Locking & Braking

Product Overview The Fadini COMBI 740 underground kit is rated as one of Arden Gates' TOP 5 products. This complete solution is ideal for automating a pair of swing gates with a maximum width of 4 meters each leaf. It features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini COMBI 740 Underground Kit - 110 Degree Rotation with Double Locking and Braking The Fadini COMBI 740 underground kit is a top-rated product from Arden Gates, offering a comprehensive solution for automating swing gates up to 4 meters wide per leaf. This kit combines compactness and strength in a fully concealed design, integrating an oil hydraulic motor pump and jack within a single enclosure for a maintenance-free experience. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/76778BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/76778BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

FAAC S800 CBAC Double Kit | Hydraulic Underground Operator for Swing Gates Up to 2m

Product Overview The FAAC S800 CBAC Double Kit is a comprehensive hydraulic underground operator kit designed for residential and condominium swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring continuous use frequency and an integrated absolute magnetic encoder with bus technology for precise control. The integrated positive stops ensure reliable operation without the need for additional ground stops. Key Features Double operator kit for swing gates Suitable for gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated absolute magnetic encoder with bus technology Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Easier handling and installation 2-year guarantee on all components Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800kg Motor Voltage: 230V AC Work Cycle: Continuous Product Description The FAAC S800 CBAC Double Kit is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This kit includes two powerful 24V DC hydraulic operators with a 100-degree opening angle, ensuring smooth and efficient gate operation. The integrated absolute magnetic encoder with bus technology guarantees precise and reliable control. The FAAC patented hybrid technology combines the benefits of hydraulic and electronic systems, offering enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated positive stops eliminate the need for additional mechanical stops on the ground, simplifying installation and reducing potential hazards. This kit is designed for quick and easy installation, making it suitable for both residential and condominium applications. The included control board, receiver, photocells, and transmitters ensure compatibility and safety, providing a complete solution for gate automation. With its comprehensive components, the FAAC S800 CBAC Double Kit offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V DC hydraulic operators S800H CBAC (100-degree opening) 2 x Collar assembly for S800 2 x Underground foundation boxes 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Installation manual and hardware

FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty

Product Overview The FAAC 770 24V UK is a high-performance underground electro-mechanical operator double kit, designed for heavy-duty gate automation. This kit is ideal for aluminum gate installations, providing robust and reliable operation for residential and commercial applications. The FAAC 770 24V UK kit includes all necessary components for a complete and efficient installation. Key Features Heavy duty automation suitable for aluminum gates. 24V underground electro-mechanical operator. Includes two motors and two foundation boxes. Comes with a control board and control board housing. Pair of photocells for enhanced safety. Plug-in receiver/decoder for easy integration. Two 2-channel remote transmitters for convenient control. 2-year guarantee for peace of mind. Product Description FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty The FAAC 770 24V UK kit is a comprehensive solution for automating aluminum gates with underground electro-mechanical operators. This heavy-duty kit ensures reliable and efficient operation, making it suitable for both residential and commercial gate installations. The 24V system provides smooth and powerful performance, while the included components ensure a complete and hassle-free setup. This kit includes two motors and two foundation boxes, ensuring a secure and stable installation for your gates. The control board and control board housing provide centralized control and easy access for maintenance and adjustments. The included pair of photocells enhances safety by detecting obstacles, preventing accidents during gate operation. The plug-in receiver/decoder allows for seamless integration with your existing gate automation system, while the two 2-channel remote transmitters offer convenient control of your gates from a distance. The FAAC 770 24V UK kit is designed to deliver reliable performance and durability, backed by a 2-year guarantee for added assurance. Kit Components 2 x Motors: Underground electro-mechanical motors for robust operation. 2 x Foundation Boxes: Secure foundation boxes for stable installation. 1 x Control Board: Centralized control unit for efficient management. 1 x Control Board Housing: Protective housing for the control board. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x Plug-in Receiver/Decoder: For easy integration with automation systems. 2 x 2-Channel Remote Transmitters: Remote controls for convenient operation. Technical Specifications SpecificationDetails Power Supply 24V Application Aluminum Gates Motor Type Electro-Mechanical Installation Type Underground Guarantee 2 Years The FAAC 770 24V UK kit provides a reliable and efficient solution for automating your aluminum gates, ensuring smooth and secure operation with advanced features and robust components.

CAME FrogPlus-P5 230v Heavy Duty Electro Mechanical Underground Operator Pair Kit | Up to 5.5m Leaf

Product OverviewThe CAME FrogPlus-P5 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 5.5m in width or 1800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 1800KgMax Length Per Gate: 5500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?2x Frog-PM4 underground operators2x Frog-PC foundation cases2x A4364 release mechanisms1x DIR-20 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details