GIBIDI GROUND KIT | Underground Electromechanical Twin Kit for Leaf up to 3.5m

Product Overview GROUND KIT - Underground Electromechanical Twin Kit for Leaf up to 3.5 meters is available in both 230Vac and 24Vdc versions. Designed for swinging gates of medium dimensions and weight, it is suitable for both residential and intensive use. Key Features Easy to install with a self-supporting foundation box Silent and fast operation, opening in just 12 seconds Adjustable opening speed in the 24Vdc version Robust construction with steel and bronze-aluminium Adjustable anti-crushing sensitivity for enhanced safety Compliant with EN12453 safety standards Painted reduction gear for protection against atmospheric and environmental agents Product Description EASY TO INSTALL Thanks to the special self-supporting foundation box. Ambidextrous motor and pre-assembled accessories. SILENT AND FAST Only 12 seconds to open the gate! Extremely silent, due to the materials used and tidy finishing of the gears. In the 24Vdc version, it is possible to adjust the opening speed. TECHNOLOGICAL AND SAFE GROUND is built entirely in steel and bronze-aluminium, robust and reliable over time. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity to enhance safety, in compliance with EN12453 standards. The unlocking key has a European profile. A COMPLETE AND RELIABLE RANGE GROUND meets all aesthetic needs of your gate and remains reliable over time, thanks to the completely painted reduction gear, protecting it from atmospheric and environmental agents. Specifications FeatureGROUND610GROUND624 Type of use Residential Heavy Duty Frequency of use 30% Heavy Duty Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 400W 150W Protection degree IP67 IP67 Shaft rotation speed 7°/s 7°/s Max torque 530 Nm 320 Nm Adjustable force Electronic Electronic Adjustable speed Electronic ** Electronic ** Max leaf width 3.5 m * 3.5 m * Max door opening angle 110° 110° Operating temperature -20°C to +60°C -20°C to +60°C Encoder/limit switch LS are optional limit switches O/C LS are optional limit switches O/C Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 11.1 Kg 11.1 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ComponentKIT GROUND610KIT GROUND624 GROUND Operators 2 2 AJ49300 Self-supporting painted foundation box 2 2 AS06320 for 1 or 2 motors (F4) 1 Not Applicable AS06399 for 1 or 2 motors (BA 24) Not Applicable 1 AU02910 2 channels plug-in receiver board for control units 1 1 Complete flashing lamp device 1 1 AU03100 MAKO remote control 433Mhz 2 2 AU01940 wall mounted key selector model DCS100 1 1 AU02250 pair of DCF180 wall mounted photocells 1 1 AJ75800 gate warning plate 1 1 Note: The kit is supplied in multiple packages.

GIBIDI KIT TOP EVO | Hydraulic Operator Kit for Gates up to 6m (230V)

Product Overview KIT TOP EVO - Hydraulic Operator Kit for Gates up to 6 meters (230V) is designed for heavy, medium, and large size swing gates. Suitable for both residential and intensive use, this 230 Vac hydraulic operators kit offers reliable and efficient performance. Key Features Easy to install with preloaded and factory adjusted components Silent and fast with hydraulic slowdowns in the last 3cm of rod travel Technologically advanced with vacuum loading process to prevent condensation and emulsion New die-cast aluminium back-end and torque settings valves Suitable for gates from small residential to large commercial or industrial types Product Description EASY TO INSTALL TOP EVO is already preloaded and factory adjusted, ready for use, with no purge valves or oil to top up. Mounting brackets supplied. SILENT AND FAST Extremely silent and fast. Hydraulic slowdowns integrated in the last 3cm of rod travel. TECHNOLOGICAL AND SAFE Built with unique technology; the vacuum loading process leaves no air residues inside, preventing condensation and emulsion. The pump-distributor coupling is without any gasket, a unique system destined to remain unchanged over time. New die-cast aluminium back-end. Complete with torque settings valves and the new embedded device to select the reversible, irreversible, or mixed mode. A COMPLETE AND RELIABLE RANGE From a small residential gate to 6-meter doors of a commercial or industrial type, this kit includes special motors for intensive use. Specifications FeatureTOP291E - ER - ER/STOP391E - ER - ER/STOP441E - ER - ER/S Type of use Heavy Duty Heavy Duty Heavy Duty Frequency of use 55% 55% 55% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz Absorbed power 170W 190W 190W Degree of protection IP65 IP65 IP65 Rod speed 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) Max rod stroke 265 mm (290 mm for E) 265 mm (290 mm for E) 425 mm (440 mm for E) Max thrust force 3000 N (2200 N for ER/S) 4500 N (3000 N for ER/S) 4500 N (3000 N for ER/S) Force adjustment Hydraulic Hydraulic Hydraulic Speed adjustment Electronic ** Electronic ** Electronic ** Hydraulic slowdown Yes (No for E) Yes (No for E) Yes (No for E) Max leaf length 3.5 m * 4.5 m * 6.0 m * Operating temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C Rod diameter 16 mm 20 mm 20 mm Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Operator weight 7.7 Kg 8.7 Kg 10 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary. ** By the use of the BA230 control board What's in the Box ComponentQuantity TOP EVO according operator 2 AS06320 for 1 or 2 motors (F4) 1 AU02910 2 channels plug-in receiver board for control units 1 70710 complete flashing lamp device DSL70710 230 Vdc 1 AU03100 MAKO remote control 433Mhz 2 AU01940 wall mounted key selector model DCS100 1 AU02250 pair of DCF180 wall mounted photocells 1 AJ75800 gate warning plate 1

GIBIDI AGO KIT K160/BFSLT & K164/BFSLT | Above Ground Kit for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO KIT - Above Ground Kit for Gates up to 4 meters - is an electromechanical operator kit available in both 230 Vac and 24 Vdc versions with an encoder. It is designed for medium and large swinging gates, suitable for residential and heavy use applications. Key Features Easy to install with adjustable brackets Silent and fast movement with steel, bronze-aluminium gears 24 Vdc version includes encoder for automatic programming and anti-crushing sensitivity Complies with EN 12453 safety standards Compact design, made with die-cast aluminium and stainless steel Optional battery kit for operation during power cuts Product Description EASY TO INSTALL Thanks to the adjustable brackets, it is not necessary to weld for installation. SILENT AND FAST Gears in steel, bronze-aluminium allowing for a high and adjustable speed of movement. TECHNOLOGICAL AND SAFE The 24 Vdc version is provided with an encoder to manage automatic programming and the adjustment of integrated anti-crushing sensitivity. Complies with the highest safety level as per EN 12453 standards. DESIGN AND RELIABILITY The most compact in its category with a tapered and simple design, suitable for every kind of gate. Made completely in die-cast aluminium and steel powder coating painted. The rod is in stainless steel. POWER CUT/BATTERY BACK-UP By the use of an optional battery kit, the gates can operate during the loss of a mains power supply. Specifications FeatureAGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width* 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg NOTE: *In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ItemKIT AGO400 (K160/BFSLT)KIT AGO424E (K164/BFSLT) AGO operators 2x 2x Gate warning plate (AJ75800) 1x 1x MAKO remote control 433Mhz (AU03100) 2x 2x Wall mounted key selector model DCS100 (AU01940) 1x 1x Pair of DCF180 wall mounted photocells (AU02250) 1x 1x Complete flashing lamp device (70710 - 70724) 1x 1x Radio receiver board 1x 1x For 1 or 2 motors (F4) (AS06320) 1x Not Applicable For 1 or 2 motors (BE24) (AS06250) Not Applicable 1x 2 channels plug-in receiver board for control units (AU02910) 1x Not Applicable

GIBIDI KIT FLOOR | Hydraulic Underground Automation Kit | 230Vac & 24Vdc, 150° & 180° Opening

Product Overview The KIT FLOOR Hydraulic Underground Automation Kit is a comprehensive solution for automating medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this kit is suitable for residential and heavy-duty use. The FLOOR operators are designed for easy installation, silent and fast operation, and provide advanced technological safety features. This kit includes all necessary components for a reliable and efficient gate automation system. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The KIT FLOOR Hydraulic Underground Automation Kit includes all necessary components for a comprehensive gate automation system. The FLOOR operators are engineered for easy installation, thanks to the special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. Kit Includes  K870/BFSLTK875/BFSLTK880/BFSLTK884/BFSLT FLOOR Operators Included Included Included Included AJ49000 Self-supporting painted foundation box Included Included Included Included AJ01400 Limit switches kit Included Not Applicable Included Not Applicable AS06320 For 1 or 2 motors (F4) Included Not Applicable Included Not Applicable AS06300 For 1 or 2 motors (BA 24) Not Applicable Included Not Applicable Included AU02910 2 channels plug-in receiver board for control units Included Included Included Included 70710 - 70724 Complete flashing lamp device Included Included Included Included AU03100 MAKO remote control 433Mhz Included Included Included Included AU01940 Wall mounted key selector model DCS100 Included Included Included Included PLEASE NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

FADINI KIT DARDO 430 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 430 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 430 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vdc operators (F/430L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 43 control unit (F/4300L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT DARDO 424 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 424 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 24 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 424 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc operators (F/424L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 42 control unit (F/4200L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT NUPI 66 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT NUPI 66 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT NUPI 66 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/661L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 7 RP control unit (F/6610L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/6660K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/107L - TRIFO 11 pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/6661K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT BART 350 | Swing Gate Operator Kit | 300 kg, 2.3 m

Product Overview The FADINI KIT BART 350 is a comprehensive kit designed for automating swinging gates with leaves weighing up to 300 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 300 kg in weight and 2.3 m in length 24 Vdc geared motor operators for robust performance Master and slave control units for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT BART 350 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc geared motor operators, one master (F/351L) with the ELPRO 35M control unit and one slave (F/352L) with the ELPRO 35S control board, providing secure and synchronized operation of your gates. The included ZERO.PH surface mount photocells (F/140L) enhance safety by detecting obstacles and preventing accidents during gate movement. For remote operation, the kit features two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. Kit Contents for F/3520K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/3521K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI HINDI 880 SPRINT KIT | Swing Gate Operator | 400 kg, 2.3 m

Product Overview The FADINI HINDI 880 SPRINT KIT is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.3 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI HINDI 880 SPRINT KIT is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/888L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 27 control unit (F/7047L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential and commercial swing gate automation. Kit Contents 2x F/888L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/7047L - ELPRO 27 control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

Fadini F/748DXL Emergency Release Bracket RH

Fadini F/748DXL Emergency Release Bracket RH Pressed steel manual emergency release bracket with spanner

Fadini F/748SXL Emergency Release Bracket LH

Fadini F/748SXL Emergency Release Bracket LH Pressed steel manual emergency releas bracket with spanner

ROGER TECHNOLOGY BR21 Underground Brushless Pair Kit - 36v

Product Overview The BR21 Underground Brushless Pair Kit is a double set of BR21 BRUSHLESS electromechanical underground motors designed for super intensive use. With a native encoder onboard, this irreversible motor is ideal for swing gates with leaves up to 5m. The kit includes all necessary components for efficient and reliable gate automation, with options for different cable lengths and high-speed operation. Key Features Double set of brushless motors Super intensive use Suitable for swing gates with leaves up to 3m (HS) / 4.5m / 5m 36V motor power supply Irreversible motor Available in high-speed (HS) options Includes 2m or 10m cable options Protection level: IP67 Product Description The BR21 Underground Brushless Pair Kit is an advanced gate automation solution designed for swing gates with leaves up to 5m. The 36V brushless motors ensure super intensive use and long-lasting performance. The kit includes FU100 or FU101 foundation boxes, a lever release system, a control panel, transmitters, a plug-in radio receiver, photocells, and an aerial. The motors are available with different cable lengths and high-speed options to suit various installation requirements. Specifications SpecificationDetails Power line supply 230V AC - 50Hz Motor power supply 24V - 36V Power rating 200W Frequency of use Intensive Torque 50 - 300 Nm Operating temperature -20 to +55°C Protection level IP67 Reductor Type Irreversible Manoeuvre speed 1.2 RPM / 2 RPM (HS) Opening time 10-29 sec Limit switch Mechanical stoppers Encoder SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) Power supply cable length 2m / 10m Bearing on main shaft Standard / Double bearings Operating cycles per day 1300 Maximum dimension product (L x W x H) 345 x 224 x 144 mm What's in the Box ConfigurationComponents Short cables - 800kg 2x BR21/351 Long cables - 800kg 2x BR21/361 Short cables - High Speed - 500kg 2x BR21/351/HS Long cables - High Speed - 500kg 2x BR21/361/HS Long cable – Double bearing - 1000kg 2x BR21/362 Short and long cables - 800kg 1x BR21/351, 1x BR21/361 Short and long cables - High Speed - 800kg 1x BR21/351/HS, 1x BR21/361/HS Included Accessories 2x FU100 or FU101 (optional) foundation boxes 2x RL650 lever release system 1x EDGE1 control panel 2x SYNUS/2 transmitters 1x H93/RX20/I plug-in radio receiver 1x M90/F4ESO photocells 1x R91/ANI/P1 aerial

RIB AUTOMATION DUKE 180 Degree Kit AD10985UK | Heavy Duty Underground Operator

Product Overview The DUKE 180 Degree Kit AD10985UK is a robust underground operator designed for heavy gates. With its oversized mechanics and anti-corrosion CATAPHORESIS treatment, this unit ensures durability and reliability with minimal maintenance. The adjustable mechanical stopper ensures precise gate positioning, eliminating the need for ground stoppers or electric limit switches. Developed and assembled by RIB, the DUKE operator offers extremely silent and precise movement. Product Description The DUKE underground operator is perfect for heavy gates, offering a durable solution with its reinforced cover and mechanical design. The anti-corrosion CATAPHORESIS treatment protects against water, dust, and rust, ensuring longevity. In the event of a power failure, the gate leaves can be manually operated using the release mechanism. The adjustable mechanical stoppers provide accurate positioning during both opening and closing. The DUKE operator is designed and assembled by RIB, guaranteeing silent and precise gate movements. Key Features Suitable for heavy gates with oversized mechanics Minimal maintenance required Reinforced cover and mechanical design for durability Anti-corrosion CATAPHORESIS treatment Manual operation in case of power failure Adjustable mechanical stopper for precise gate positioning Extremely silent and precise movement 180-degree gate opening angle What's in the Box 2 x Motors & Foundation boxes 1 x Pair of Photocells 1 x T2 CRX control panel & enclosure 2 x Clone remote transmitters 2 x Release kits Specifications Motor Type: 230v underground operator Maximum Gate Opening Angle: 180 degrees Corrosion Protection: CATAPHORESIS treatment Control Panel: T2 CRX Includes: Motors, foundation boxes, photocells, control panel, remote transmitters, release kits Features: Adjustable mechanical stopper, manual release mechanism

RIB AUTOMATION DUKE 110 Degree 230v Twin Kit AD10975UK | Heavy Duty Underground Operator

Product Overview The DUKE 110 Degree 230v Twin Kit AD10975UK is a robust underground operator designed for heavy gates. With its oversized mechanics and anti-corrosion CATAPHORESIS treatment, this unit ensures durability and reliability with minimal maintenance. The adjustable mechanical stopper ensures precise gate positioning, eliminating the need for ground stoppers or electric limit switches. Developed and assembled by RIB, the DUKE operator offers extremely silent and precise movement. Product Description The DUKE underground operator is perfect for heavy gates, offering a durable solution with its reinforced cover and mechanical design. The anti-corrosion CATAPHORESIS treatment protects against water, dust, and rust, ensuring longevity. In the event of a power failure, the gate leaves can be manually operated using the release mechanism. The adjustable mechanical stoppers provide accurate positioning during both opening and closing. The DUKE operator is designed and assembled by RIB, guaranteeing silent and precise gate movements. Key Features Suitable for heavy gates with oversized mechanics Minimal maintenance required Reinforced cover and mechanical design for durability Anti-corrosion CATAPHORESIS treatment Manual operation in case of power failure Adjustable mechanical stopper for precise gate positioning Extremely silent and precise movement What's in the Box 2 x Motors & Foundation boxes 1 x Pair of Photocells 1 x T2 CRX control panel & enclosure 2 x Clone remote transmitters 2 x Release kits Specifications Motor Type: 230v underground operator Maximum Gate Opening Angle: 110 degrees Corrosion Protection: CATAPHORESIS treatment Control Panel: T2 CRX Includes: Motors, foundation boxes, photocells, control panel, remote transmitters, release kits Features: Adjustable mechanical stopper, manual release mechanism

Fadini F/7426L COMBI 740 | Underground Kit | 175° Rotation, Double Locking & Braking

Product Overview The Fadini F/7426L COMBI 740 underground kit is a comprehensive solution for automating a pair of swing gates with a maximum width of 4 meters per leaf. It features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. This kit is ideal for both commercial and industrial installations. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini F/7426L COMBI 740 Underground Kit - 175 Degree Rotation with Double Locking and Braking The Fadini F/7426L COMBI 740 underground kit is designed to provide a complete and efficient solution for automating swing gates. This kit is rated among Arden Gates' TOP 5 products for its reliability and performance. Suitable for gates up to 4 meters per leaf, it features a compact, concealed assembly with an integrated oil hydraulic motor pump and jack for maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/7697BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/7697BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

Fadini COMBI 740 | Underground Kit | 110° Rotation, Double Locking & Braking

Product Overview The Fadini COMBI 740 underground kit is rated as one of Arden Gates' TOP 5 products. This complete solution is ideal for automating a pair of swing gates with a maximum width of 4 meters each leaf. It features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini COMBI 740 Underground Kit - 110 Degree Rotation with Double Locking and Braking The Fadini COMBI 740 underground kit is a top-rated product from Arden Gates, offering a comprehensive solution for automating swing gates up to 4 meters wide per leaf. This kit combines compactness and strength in a fully concealed design, integrating an oil hydraulic motor pump and jack within a single enclosure for a maintenance-free experience. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/76778BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/76778BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

Fadini COMBI 740 | Underground Kit | Double Locking, 110° Rotation

Product Overview The Fadini COMBI 740 underground kit is a complete solution for automating a pair of swing gates with a maximum width of 3 meters each leaf. This kit features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, and features an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini COMBI 740 Underground Kit - Double Locking with 110 Degree Rotation The Fadini COMBI 740 underground kit is an advanced solution designed to automate swing gates efficiently and securely. This kit is ideal for gates up to 3 meters wide per leaf and features a compact and fully concealed installation that ensures a clean and unobtrusive look. The integrated oil hydraulic motor pump and jack system within a single enclosure ensure durability and maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, and features an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/7677BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/7677BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

FAAC S800 CBAC Double Kit | Hydraulic Underground Operator for Swing Gates Up to 2m

Product Overview The FAAC S800 CBAC Double Kit is a comprehensive hydraulic underground operator kit designed for residential and condominium swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring continuous use frequency and an integrated absolute magnetic encoder with bus technology for precise control. The integrated positive stops ensure reliable operation without the need for additional ground stops. Key Features Double operator kit for swing gates Suitable for gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated absolute magnetic encoder with bus technology Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Easier handling and installation 2-year guarantee on all components Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800kg Motor Voltage: 230V AC Work Cycle: Continuous Product Description The FAAC S800 CBAC Double Kit is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This kit includes two powerful 24V DC hydraulic operators with a 100-degree opening angle, ensuring smooth and efficient gate operation. The integrated absolute magnetic encoder with bus technology guarantees precise and reliable control. The FAAC patented hybrid technology combines the benefits of hydraulic and electronic systems, offering enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated positive stops eliminate the need for additional mechanical stops on the ground, simplifying installation and reducing potential hazards. This kit is designed for quick and easy installation, making it suitable for both residential and condominium applications. The included control board, receiver, photocells, and transmitters ensure compatibility and safety, providing a complete solution for gate automation. With its comprehensive components, the FAAC S800 CBAC Double Kit offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V DC hydraulic operators S800H CBAC (100-degree opening) 2 x Collar assembly for S800 2 x Underground foundation boxes 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Installation manual and hardware

CAME FrogPlus-P5 230v Heavy Duty Electro Mechanical Underground Operator Pair Kit | Up to 5.5m Leaf

Product OverviewThe CAME FrogPlus-P5 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 5.5m in width or 1800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 1800KgMax Length Per Gate: 5500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?2x Frog-PM4 underground operators2x Frog-PC foundation cases2x A4364 release mechanisms1x DIR-20 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details