ROGER TECHNOLOGY SL/180/R - Swing Gate Motor | Up to 1.8m | Without Arms | Reversible | 36V

Product Overview The SL/180/R Swing Gate Motor is designed for intensive use, supporting swing gates with leaves up to 1.8m. This low voltage electromechanical gear motor operates on 36V and features brushless IPU technology with an integrated digital encoder. The motor is reversible, locking in the open and closed positions while the power is on, but unlocking as the power goes off, providing an emergency free exit during power cuts. The motor comes without arms, which can be purchased separately (see Accessories for arms). Key Features 36V power supply Reversible motor Suitable for swing gates with leaves up to 1.8m Brushless IPU technology Integrated digital magnetic encoder (4096 PPR) Intensive use Specifications Power line supply 230V AC 50Hz Motor power supply 36V Power rating 200W Frequency of use Intensive use Torque 150 N m Operating temperature -20 to +55°C Protection level IP44 Reductor Type Reversible Manoeuvre speed 0.6 - 6.6 Rpm Opening time 6-30 s Limit switch Mechanical stop on opening and closing only with LT341 accessory Recommended digital controllers F70/IPU36/BOX, F70/IPU36/BOX/SL Encoder Digital magnetic encoder SENSORED, 4096 PPR Batteries recovery 3 external batteries 12V DC 4.5 Amp/h (on external box) - optional Operating cycles per day 400000 (opening/closing - 24 hours no stop) Maximum dimension product (L x W x H) 492 x 102 x 144.5 mm Accessories KT250 KT218 LT340 - Arms short for articulated SLED series LT341 - Slide arm lever for articulated SLED series

ROGER TECHNOLOGY TW90 Brushless Sliding Gate Motor | 24V | Up to 600kg

Product Overview The TW90 Brushless Sliding Gate Motor is designed for super intensive use, supporting sliding gates up to 600kg. This electromechanical motor operates on 24V and features a high-speed brushless design. It comes equipped with a sensored digital magnetic encoder at 4096 PPR and is available with either separate or built-in control panels. The TW90 motor is available in various configurations, including high-speed and reversible options, ensuring flexibility for different installation needs. Key Features 24V power supply High speed option available Irreversible or reversible options Separate or built-in control panel options Supports sliding gates up to 800kg Motor Options TW90/620/HS - Up to 600kg | High Speed | 24V | Separate control panel TW90/800 - Up to 800kg | 24V | Built-in control panel TW90/800/R - Up to 800kg | Reversible | 24V | Built-in control panel TW90/820 - Up to 800kg | 24V | Separate control panel TW90/820/R - Up to 800kg | Reversible | 24V | Separate control panel Reversible Motors Roger Technology reversible motors lock in the open and closed positions while the power is on but unlock as the power goes off. This feature is useful for emergency free exits during power cuts. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. Specifications  TW90/620/HSTW90/800TW90/800/RTW90/820TW90/820/R Max Gate Weight (kg) 600 800 800 800 800 Power Line Supply 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz Motor Power Supply 24V 24V 24V 24V 24V Power Rating (W) 180 180 130 180 180 Frequency of Use Intensive use Intensive use Intensive use Intensive use Intensive use Thrust (N) 250 385 270 385 270 Operating Temperature (°C) -20 to +55 -20 to +55 -20 to +55 -20 to +55 -20 to +55 Protection Level IP44 IP44 IP44 IP44 IP44 Reductor Type Irreversible Irreversible Reversible Irreversible Reversible Manoeuvre Speed (m/min) 25 (0.42) 12.3 (0.2) 18 (0.3) 12.3 (0.2) 18 (0.3) Limit Switch Without limit switches - optional Without limit switches - optional Without limit switches - optional Without limit switches - optional Without limit switches - optional Onboard Control Unit B70/1T B70/1T B70/1T B70/1T B70/1T Encoder Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Batteries Recovery - Optional 2 internal battery 12V 1.2AH Optional 2 internal battery 12V 1.2AH - - Type Exit Gear Z15/mod 4 Z15/mod 4 Z15/mod 4 Z15/mod 4 Z15/mod 4 Operating Cycles per Day 150000 150000 150000 150000 150000 Maximum Dimension Product (L x W x H in mm) 166 x 134.4 x 214.5 132 x 138.5 x 470 132 x 138.5 x 470 166 x 134.4 x 214.5 166 x 134.4 x 214.5

ROGER TECHNOLOGY TW110 Brushless Sliding Gate Motor | 36v | Up to 2000kg

TW110 Brushless Sliding Gate Motor | 36v | Up to 2000kg Electromechanical HIGH SPEED BRUSHLESS motor, low voltage, super intensive use, with SENSORED digital magnetic encoder at 4096 PPR, irreversible with digital controller in pre-wired plastic box series B70. Motor options: TW110/1000/HS - Up to 1000kg | High Speed | 36v TW110/1200/R - Up to 1200kg | Reversible | 36v TW110/1600/HS - Up to 1600kg | High Speed | 36v TW110/2000 - Up to 2000kg | 36v ** Reversible Motors ** Roger Technology reversible motors lock in the open and closed position while the power is on but unlock as the power goes off. This feature is useful if you need an emergency free exit in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. Key Features: 36v High Speed model available Reversible model available Sliding gates up to 2000kg Specifications:  TW110/1000/HSTW110/1200/RTW110/1600/HSTW110/2000 Max Gate Weight (kg) 1000 1200 1000 2000 Power Line Supply 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz 230V AC - 50Hz Motor Power Supply 36V 36V 36V 36V Power Rating (W) 240 240 240 240 Frequency of Use Intensive use Intensive use Intensive use Intensive use Thrust (N) 270 300 270 570 Operating Temperature (°C) -20 to +55 -20 to +55 -20 to +55 -20 to +55 Protection Level IP44 IP44 IP44 IP44 Reductor Type Irreversible Reversible Irreversible Irreversible Manoeuvre Speed (m/min) 25 (0.42) 17 (0.28) 25 (0.42) 12 (0.16) Limit Switch Without limit switches - optional Without limit switches - optional Without limit switches - optional Without limit switches - optional Onboard Control Unit B70/1THP B70/1THP B70/1THP B70/1THP Encoder Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Digital magnetic encoder SENSORED, 4096 PPR Batteries Recovery Optional 2 external battery 12V 4,5AH Optional 2 external battery 12V 4,5AH Optional 2 external battery 12V 4,5AH Optional 2 external battery 12V 4,5AH Type Exit Gear Z20/mod 4 Z17/mod 4 Z20/mod 4 Z17/mod 4 Operating Cycles per Day 150000 150000 150000 150000 Maximum Dimension Product (L x W x H in mm) 185 x 160 x 333 185 x 160 x 333 185 x 160 x 333 185 x 160 x 333    

ROGER TECHNOLOGY BH30 Brushless Sliding Gate Motor | 24V | Up to 1000kg | High Speed & Reversible Options

Product Overview The BH30 Brushless Sliding Gate Motor is an electromechanical 24V BRUSHLESS motor designed for low voltage and super intensive use. This motor is equipped with a native encoder onboard and a built-in digital controller from the B70 series. It is ideal for sliding gates weighing up to 1000kg. The BH30 motor is available in high-speed and reversible editions, providing robust performance and reliability for both residential and commercial applications. Key Features 24V Brushless motor Super intensive use Native encoder onboard Mechanical or magnetic limit switch options Irreversible or reversible models High-speed motors available Supports sliding gates up to 1000kg Operator Options BH30/603/HS - Up to 600kg - High Speed - Mechanical limit switch BH30/604/HS - Up to 600kg - High Speed - Magnetic limit switch BH30/803 - Up to 1000kg - Mechanical limit switch BH30/804 - Up to 1000kg - Magnetic limit switch BH30/804/R - Up to 800kg - Reversible - Magnetic limit switch Specifications SpecificationBH30/603/HSBH30/604/HSBH30/803BH30/804BH30/804/R Max Gate Weight (kg) 600 600 1000 1000 800 Power Line Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating (W) 130 130 200 200 140 Frequency of Use Intensive use Thrust (N) 50 - 500 50 - 500 50 - 1000 50 - 1000 60 - 600 Operating Temperature (°C) -20 to +55 Protection Level IP43 IP44 IP43 IP43 IP43 Reductor Type Irreversible Irreversible Irreversible Irreversible Reversible Manoeuvre Speed (m/min) 26 (0.4) 26 (0.4) 12 (0.20) 12 (0.20) 18 (0.30) Limit Switch Mechanical Magnetic Mechanical Magnetic Magnetic Onboard Control Unit B70/1DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries Recovery Optional 2 internal battery 12V 1.2AH - Optional 2 external battery 12V 4.5AH Type Exit Gear Z15/mod 4 Operating Cycles per Day 800 800 1300 1300 1000 Maximum Dimension Product (L x W x H in mm) 315 x 165.8 x 329 Product Description The BH30 Brushless Sliding Gate Motor is a versatile and reliable solution for operating sliding gates up to 1000kg. With a 24V low voltage design and super intensive use capability, it is perfect for both residential and commercial settings. The motor features a built-in digital controller from the B70 series and a native encoder for precise control. Available in high-speed and reversible models, the BH30 motor meets various application requirements. The reversible motors lock in the open and closed positions when powered, providing enhanced security and an emergency exit option during power outages. Standard Accessories KT214: Fixing plate with stay bolts and screws for H30 series MC773: Kit mechanical limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP Other Accessories GA550: Galvanised steel rack 22x22x1000 module 4 GA551: Galvanised steel rack 30x12x1000 module 4 with spacers and screws GA554: Pocket of 6 spacers (2.5 cm) and screws KT221: Raised fixing plate for H30 series (+3.5 cm) R99/C/001: Signboard "Automatic Opening" KT214/SC: Adapter plate with stay bolts and screws for H30 series B71/BC: Batteries charger for Brushless digital controller B70/1DC BT12V12: Battery 12V 1.2 Ah (1 pc) BT12V45: Battery 12V 4.5 Ah (1 pc) HT418: External box without batteries, for battery BT12V45 (12V DC 4.5 Ah) KT214/SF: Adapter plate with stay bolts and screws for H30 series GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000 KT214/SN: Adapter plate with stay bolts and screws for H30 series LT330: Chain drive kit for H30 - BH30 series LT334: 1/2" X 5/16" 5 meter chain piece for LT330 with joint R99/C/001AL: Aluminium version of the "Automatic Opening" signboard B71/PBX24/BOX: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 230V AC B71/PBX24/BOX/115: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 115V AC B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for brushless digital controllers HT421: External box without batteries, for battery BT12V45 (4.5 Ah), BT12V70 (7 Ah), and BT12V120 (12 Ah), up to a maximum of 3 batteries Additional Information For more details on the BH30 Brushless Sliding Gate Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BG30 Brushless Sliding Gate Motor | 36v | Up to 2200kg

BG30 Brushless Sliding Gate Motor | 36v | Up to 2200kg Electromechanical BRUSHLESS 36v motor, low voltage, super intensive use, with native encoder onboard, with built-in digital controller B70 series, with magnetic limit switch. Ideal for sliding gates up to: 1000 kg (BG30/1004/HS) - High Speed 1400 kg (BG30/1404/R) - Reversible 1500 kg (BG30/1504/HS) - High Speed 1600 kg (BG30/1604) 1800 kg (BG30/1804/HS) - High Speed 2200 kg (BG30/2204) ** Reversible Motors ** Roger Technology reversible motors lock in the open and closed position while the power is on but unlock as the power goes off. This feature is useful if you need an emergency free exit in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. Key Features: Brushless Super intensive use With magnetic limit switch Available in high speed edition (depending on the chosen option) Available in reversible edition (depending on the chosen option) Specifications: SpecificationBG30/1004/HSBG30/1404/RBG30/1504/HSBG30/1604BG30/1804/HSBG30/2204 Max gate weight (kg) 1000 1400 1500 1600 1800 2200 Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 590 540 650 390 650 470 Frequency of use Intensive use Thrust (N) 50 - 800 50 - 600 50 - 1000 50 - 1200 50 - 1250 50 - 1700 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Manoeuvre speed (m/min) 20 (0.33) 17 (0.28) 25 (0.42) 12 (0.20) 18 (0.30) 12 (0.16) Limit switch Magnetic Onboard control unit B70/1DCHP Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries recovery Optional 2 external battery 12V 4,5AH Type exit gear Z17/mod 4 Z17/mod 4 Z20/mod 4 Z17/mod 4 Z17/mod 4 Z17/mod 4 Operating cycles per day (opening/closing - 24 hours no stop) 800 800 800 1000 800 1000 Maximum dimension product (L x W x H in mm) 350 x 220 x 380 Accessories: Standard Accessories: KT215: Fixing plate for G30 series. MC775: Magnetic limit switch kit for control units H70/103AC, H70/104AC, B70/1DC, B70. Other Accessories:   GA550: Galvanised steel rack, module 4. GA551: Galvanised steel rack with spacers and screws, module 4. GA554: Spacer and screw packet. KT222: Raised fixing plate for G30 series. R99/C/001: Signboard "Automatic Opening". B71/BCHP/EXT: Emergency battery charger kit for EDGE1/BOX, B70/1DCHP. B71/BCHP/BOX: Emergency battery charger kit for EDGE1/BOX, B70/1DCHP, without batteries. LT328: Pinion Z17 for R30, G30, E30 series. LT331: Pinion Z11 for G30, BG30 series. GA557: Nylon rack with connectors, module 4. B74/BCONNECT: Wi-Fi module for remote management. R99/C/001AL: Aluminium "Automatic Opening" signboard. B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC. B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC. B71/PBX/BOX: Hybrid inverter, solar version for brushless digital controllers. GA558: Nylon rack, module 6 with connectors. MC783: Increased magnets for magnetic limit switch. HT421: External battery box for BT12V45, BT12V70, BT12V120.  

ROGER TECHNOLOGY SET BI/008GO - Bionik Brushless Barrier Kit 36V DC | Up to 8 Meters

Product Overview The SET BI/008GO Bionik Brushless Barrier Kit is a high-performance barrier system designed for super intensive use. This 36V DC barrier can handle booms up to 8 meters long, making it ideal for managing large entrances and exits. The kit comes complete with a control unit, on-board native encoder, and a robust fastening base with tie rods and screws, ensuring reliable and secure installation. This barrier system is perfect for commercial and industrial settings that require frequent operation. The Bionik Brushless Barrier is equipped with advanced features such as a digital native encoder, magnetic digital sensor, and BUS synchronization for master/slave operation. Key Features High Performance: 36V DC brushless motor designed for super intensive use, capable of handling up to 2500 cycles per day. Extended Reach: Supports booms up to 8 meters long, ideal for large entrances. Advanced Control: Comes with a CTRL Digital Controller and a digital native encoder for precise operation. Robust Construction: Features a painted RAL9006 arabesque grey cabinet, black arabesque silver painted head and boom support, and RAL9010 matt painted boom. Secure Locking: Equipped with a European key cylinder release system for enhanced security. Temperature Resistant: Operates efficiently in temperatures ranging from -20°C to +55°C. Easy Installation: Includes a fastening base with tie rods and screws, and boom fastening flanges. Specifications Barrier Length: Up to 8 meters Power Supply: 230V AC - 50 Hz Motor Power Supply: 36V DC Electrical Absorption: Max. 18A Power Rating: 300W Frequency of Use: Super intensive use Torque: 10 - 400 N m Operating Temperature: -20°C to +55°C Protection Level: IP54 Reductor Type: Irreversible Opening Time at 90°: 9-29 seconds Control Unit: CTRL Digital Controller 36V DC Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply: 24V DC Release System: European key cylinder Batteries Recovery: Available (optional) BUS Synchronization: Master/Slave Kit Components BI/008 Barrier unit SP/85/AS/02 Spring 2 x BA/128/04 (4 metre boom) 2 x JNT/BA/128 joint ALED/8C LIGHTS (Comes with extended kit) BAFS/02 (Comes with extended kit) For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

ROGER TECHNOLOGY BG30 Brushless Sliding Gates Kit | 36V Motor for Super Intensive Use

Product Overview The BG30 Brushless Sliding Gates Kit features an electromechanical BRUSHLESS motor with a 36V power supply, designed for low voltage and super intensive use. This kit includes a built-in digital controller from the B70 series and a magnetic limit switch. It is ideal for sliding gates with weights ranging from 1000kg to 2200kg. Available in high-speed and reversible editions, this kit offers robust performance and reliability for both residential and commercial applications. Key Features Brushless motor Super intensive use Magnetic limit switch Available in high-speed edition (depending on chosen option) Available in reversible edition (depending on chosen option) Reversible motors lock in open/closed position when powered Product Description The BG30 Brushless Sliding Gates Kit is engineered for robust performance, featuring a 36V BRUSHLESS motor that ensures super intensive use. This motor is ideal for sliding gates with weights from 1000kg up to 2200kg, depending on the chosen option. The kit includes high-speed and reversible options, making it versatile for various applications. The built-in digital controller and magnetic limit switch provide precise control and enhance the reliability of the system. Reversible motors offer additional safety, unlocking during power cuts to allow for emergency exits. Specifications SpecificationBG30/1006/HSBG30/1406/RBG30/1506/HSBG30/1606BG30/1806/HSBG30/2206 Max gate weight (kg) 1000 1400 1500 1600 1800 2200 Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 590 540 650 390 650 470 Frequency of use Intensive use Thrust (N) 50 - 800 50 - 600 50 - 1000 50 - 1200 50 - 1250 50 - 1700 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Manoeuvre speed (m/min) 20 (0.33) 17 (0.28) 25 (0.42) 12 (0.20) 18 (0.30) 12 (0.16) Limit switch Magnetic Onboard control unit B70/1DCHP Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries recovery Optional 2 external battery 12V 4.5AH Type exit gear Z17/mod 4 Operating cycles per day (opening/closing - 24 hours no stop) 800 800 800 1000 800 1000 Maximum dimension product (L x W x H in mm) 350 x 220 x 380 What's in the Box 1x Operator with control panel (model of operator depends on chosen option) 2x SYNUS Transmitters 1x PR M90/F4ESO Photocells 1x H93/RX22A/I Plug in Radio Receiver 1x R91/ANI/P1 Aerial Additional Information For more details on the BG30 Brushless Sliding Gates Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.