ROGER TECHNOLOGY LT301 - Chain Drive Kit for Opening up to 360°

Product Overview: Levers for opening up to 360°.

ROGER TECHNOLOGY SMARTY Brushless Single | 36V High-Speed Electromechanical Gear Motor Kit

Product Overview The SMARTY Brushless Single is a single 36V high-speed brushless electromechanical gear motor kit designed for extremely heavy-duty use. This kit comes with a mechanical stopper in both opening and closing. Depending on the chosen option, we provide the following variants: SMARTY4/HS - Irreversible high speed, with leaf up to 4m length SMARTY5 - Irreversible, with leaf up to 5m length SMARTY5R - Reversible, with leaf up to 5m length SMARTY7 - Irreversible, with leaf up to 7m length SMARTY7R - Reversible, with leaf up to 7m length Reversible Motors: Roger Technology reversible motors lock in the open and closed position while the power is on but unlock when the power goes off. This feature is useful for emergency free exits in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. Key Features 36V Irreversible or Reversible High-speed variant available with SMARTY4/HS Suitable for swing gates with leaf up to 7m Specifications SpecificationSMARTY4/HSSMARTY5SMARTY5RSMARTY7SMARTY7R Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 200 Frequency of use Intensive use Thrust (N) 600 - 4500 600 - 7000 600 - 6500 600 - 7000 600 - 6500 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Irreversible Reversible Irreversible Reversible Manoeuvre speed (cm/s) 2 - 1 1.6 1.8 1.6 1.6 Opening time (s) 15-25 25-40 20-40 35-50 35-50 Stroke (mm) 370 370 370 520 520 Limit switch Mechanical stopper in opening and closing Recommended digital controllers 230V: EDGE1/BOX - 115V: EDGE1/BOX/115 Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours no stop) 1000 Maximum dimension product (L x W x H in mm) 1162 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 Kit Contains 1x Operator (of your choice) 1 x EDGE1 control panel 2 x SYNUS/2 transmitter 1 x H93/RX90/I plug in radio receiver 1 x M90/F4ESO 180 Photocells 1 x R91/ANI/P1 aerial Contact Us For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY KIT MONOS4 Brushless Pair | Swing Gate Operator | Up to 4m

Product Overview The KIT MONOS4 Brushless Pair is an electromechanical operator set designed for swing gates with leaves up to 4 meters. Available in 24V or 230V, these irreversible motors feature a telescopic arm and are built for super intensive use. The 24V version includes a native encoder onboard, ensuring precise control and operation. Key Features Suitable for swing gates with leaves up to 4m Available in 24V or 230V Irreversible motor design Super intensive use capability Telescopic arm for flexible installation Integrated digital native encoder (24V version) Specifications Specifications24V230V Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V 230V AC Power rating 200W 200W Frequency of use Intensive use 30% Thrust 2200N 2400N Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP44 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 2.10 cm/s 1.66 cm/s Opening time 19-35 s 24 s Stroke 400 mm 400 mm Limit switch - - Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR - Operating cycles per day (opening/closing - 24 hours no stop) 700 - Maximum dimension product in mm (L x W x H) 1223 x 178 x 111 1223 x 178 x 111 What's in the Box 24V Version 2x Operator 1x B70/2ML/BOX 2x SYNUS/2 1x H93/RX20/I 1x R90/F4ES 1x FIFTHY/24 230V Version 2x Operator 1x H70/200AC/BOX 1x H93/RX20/I 2x T80/TX2 1x R90/F2ES 1x FIFTHY/230 Note: Actual product may differ from photo. For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY BM30 Sliding Gates Kit | 24V High-Speed Brushless Motor

Product Overview The BM30 Sliding Gates Kit is an advanced electromechanical solution designed for super intensive use, equipped with a high-speed 24V brushless motor. This irreversible motor is perfect for sliding gates weighing up to 400 kg, featuring a built-in digital controller from the B70 series and a magnetic limit switch for precise positioning. The BM30 kit ensures reliable and fast operation, making it ideal for both residential and commercial properties. Key Features Suitable for sliding gates up to 400 kg Designed for intensive use Irreversible motor for added security High-speed operation Magnetic limit switch for accurate positioning Built-in digital controller (B70 series) Specifications SpecificationDetails Max Gate Weight Suitable for gates weighing up to 400 kg Power Line Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating 125W Frequency of Use Intensive use Thrust 50 - 350N Operating Temperature Range -20°C to +55°C Protection Level IP44 Reductor Type Irreversible Manoeuvre Speed 26 meters per minute (0.44 meters per second) Limit Switch Magnetic Onboard Control Unit B70/1DC Encoder Digital native encoder with magnetic digital SENSORED technology, 4096 PPR Type Exit Gear Z15/mod 4 Operating Cycles per Day Up to 500 cycles (opening/closing) in 24 hours Product Dimensions (L x W x H) 250 x 165 x 290 mm Product Weight Approximately 11.6 kg What's in the Box BM30/304/HS Motor: High-speed brushless motor designed for super intensive use, with built-in B70 series digital controller and magnetic limit switch. H93/RX20/I Plug-in Receiver: Two-channel receiver with fixed code, operating at 433.92 MHz, compatible with H70, B70, EDGE, and CTRL series control units. SYNUS/2 Transmitters: Dual code transmitter operating at 433.92 MHz, with fixed code or rolling code functionality and radio copy feature. R90/F4ES Photocells: Pair of synchronized external photocells operating at 24V AC/DC, supporting up to 4 pairs. FIFTHY/24 LED Flashing Light: 24V LED flashing light with integrated antenna for signaling purposes during gate operations. R99/C/001 Signboard: "Automatic Opening" signboard for safety and informational purposes. Additional Information The BM30 Sliding Gates Kit is designed for high durability and reliable performance, making it ideal for environments that require frequent and intensive gate operations. For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY BH30 Sliding Gates Kit | 24V Brushless Motor | For Gates Up to 1000 kg

Product Overview The BH30 Sliding Gates Kit is a high-performance solution designed for super intensive use, equipped with a 24V brushless motor and native encoder onboard. This kit includes a built-in digital controller from the B70 series and a magnetic limit switch, ensuring precise and reliable operation for sliding gates. Ideal for gates up to 1000 kg, the BH30 kit is available in a high-speed edition for enhanced performance. Key Features 24V brushless motor for intensive use Magnetic limit switch for accurate positioning High-speed edition available for gates up to 600 kg Supports sliding gates up to 1000 kg Built-in digital controller (B70 series) Native encoder onboard for precise control Product Variants BH30/606/HS: High-speed motor for gates up to 600 kg BH30/806: Standard motor for gates up to 1000 kg Specifications SpecificationBH30/606/HSBH30/806 Max gate weight (kg) 600 1000 Power line supply 230V AC - 50Hz Motor power supply 24V Power rating (W) 130 200 Frequency of use Intensive use Thrust (N) 50 - 500 50 - 1000 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Manoeuvre speed (m/min) 26 (0.4) 12 (0.20) Limit switch Magnetic Onboard control unit B70/1DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries recovery Optional 2 internal battery 12V 1.2AH - Optional 2 external battery 12V 4.5AH Type exit gear Z15/mod 4 Operating cycles per day (opening/closing - 24 hours non-stop) 800 1300 Maximum dimension product (L x W x H in mm) 315 x 165.8 x 329 What's in the Box 1x Operator with control panel (model depends on chosen option) 2x SYNUS Transmitters 1x PR R90/F4ES Photocells 1x H93/RX22A/I Plug-in Radio Receiver 1x FIFTHY/24 Additional Information The BH30 Sliding Gates Kit is designed for super intensive use, making it perfect for high-traffic areas. The kit's components are built to withstand demanding conditions, ensuring long-lasting performance and reliability. For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY SMARTY Brushless Motor | 36V | Up to 7m Gate Length

Product Overview The SMARTY Brushless Motor is a high-performance 36V electro-mechanical gear motor designed for extremely heavy-duty applications. Ideal for swing gates with leaf lengths up to 7 meters, this motor offers both reversible and irreversible options to suit various needs. The SMARTY motor series includes high-speed variants and is equipped with a mechanical stopper for precise opening and closing. Key Features 36V brushless motor for heavy-duty use Available in reversible and irreversible options High-speed variant available (SMARTY4/HS) Suitable for swing gates with leaf lengths up to 7 meters Mechanical stopper for precise opening and closing Intensive use with up to 1000 operating cycles per day Operating temperature range: -20°C to +55°C Protection level: IP44 Product Variants SMARTY4/HS: Irreversible high-speed motor for leaf up to 4m length SMARTY5: Irreversible motor for leaf up to 5m length SMARTY5R: Reversible motor for leaf up to 5m length SMARTY7: Irreversible motor for leaf up to 7m length SMARTY7R: Reversible motor for leaf up to 7m length Specifications SpecificationSMARTY4/HSSMARTY5SMARTY5RSMARTY7SMARTY7R Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 200 Frequency of use Intensive use Thrust (N) 600 - 4500 600 - 7000 600 - 6500 600 - 7000 600 - 6500 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Irreversible Reversible Irreversible Reversible Manoeuvre speed (cm/s) 2 - 1 1.6 1.8 1.6 1.6 Opening time (s) 15-25 25-40 20-40 35-50 35-50 Stroke (mm) 370 370 370 520 520 Limit switch Mechanical stopper in opening and closing Recommended digital controllers 230V: EDGE1/BOX - 115V: EDGE1/BOX/115 Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours non-stop) 1000 Maximum dimension product (L x W x H in mm) 1162 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 Reversible Motors Roger Technology reversible motors lock in the open and closed position while the power is on but unlock as the power goes off. This feature is useful if you need an emergency free exit in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. For Further Inquiries For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY M90/F4ESO 180 Photocells (SYNC WIRE) | Infra-Red Presence Detectors

Product Overview The M90/F4ESO 180 Photocells (SYNC WIRE) are infra-red presence detectors designed for automatic gate systems. They operate on 12/24V AC/DC and ensure obstacle detection along the optical axis between the transmitter (TX) and receiver (RX). Key Features Innovative design ideal for any architectural form Designed for installation in very narrow spaces Special covers protect screws with scratch-proof support release system Ability to synchronize two photocell pairs LED signal quality optimization for precise detection Adjustable range distances on two levels 180 Degree rotatable vertically and horizontally IP55 protection rating for outdoor use Operates on 12/24V AC 50Hz or 12/24V DC Relay contacts: Max current 0.5A, Max voltage 30V Operating temperature: -20°C to +60°C Installation Type: External Maximum number of synchronized photocells: 4 Product Description The M90/F4ESO 180 Photocells (SYNC WIRE) are advanced infra-red detectors designed to enhance the safety and functionality of automatic gate systems. They are engineered for precise obstacle detection within a range of 10 to 15 meters in open field conditions. Featuring an innovative design, these photocells are suitable for installation in tight spaces, ensuring flexibility in architectural layouts. They include special covers to protect screws and employ a scratch-proof support release system, enhancing durability and ease of maintenance. The M90/F4ESO photocells offer the capability to synchronize two pairs, optimizing coverage and ensuring reliable detection across the gate's operational range. LED indicators assist in aligning the photocells for optimal performance, while adjustable range distances provide flexibility in installation. With a robust construction and IP55 protection rating, these photocells are suitable for external installations, offering reliable operation in various weather conditions. They operate on both 12V and 24V AC/DC power, accommodating different system configurations and requirements. What's in the Box 1 x M90/F4ESO 180 Photocells (SYNC WIRE)

ROGER TECHNOLOGY SET H23 - Pair of Electromechanical Articulated Motors | 230V | 2.8m Leaf

Product Overview The SET H23 includes a pair of 230V AC irreversible electromechanical articulated motors, perfect for swing gates with leaves up to 2.8 meters in length. This kit provides a reliable and efficient solution for both residential and commercial swing gate applications. Key Features Suitable for swing gates with leaves up to 2.8 meters 230V AC power supply Irreversible electromechanical motors Equipped with an encoder for precise control Mechanical limit switch Specifications FeatureSpecification Power Supply 230V AC - 50Hz Motor Power Supply 230V AC Power Rating 200W Frequency of Use 50% Torque 300 N m Operating Temperature Range -20 to +55°C Protection Level IP43 Manoeuvre Speed 1.2 Rpm Opening Time 12 seconds Motor Thermal Protection 150°C Limit Switch Microswitch for both opening and closing Encoder Optical type Dimensions (L x W x H) 230 x 190 x 284 mm Product Weight 29.2 Kg What's in the Box 2x - H23/282: Electromechanical articulated motor 230V AC irreversible for swing gates with leaf up to 2.8m, with encoder and mechanical limit switch. 1x - H70/200AC/BOX: Control unit for 2 motors 230V AC with slow down, housed in a plastic box. 1x - H93/RX22A/I: Plug-in receiver fixed code 2 channels 433.92 MHz (500 storable codes) for control unit series H70, B70, EDGE, and CTRL. 2x - T80/TX2: Dual code transmitter (fixed code or rolling code), 433.92 MHz, 2 channels, with radio for copy. 1x - R90/F2ES: Pair of external photocells synchronized. 1x - FIFTHY/230: LED flashing light series FIFTHY 230V - 115V with integrated antenna. 1x - R99/C/001: Signboard "Automatic Opening". Applications The SET H23 is suitable for various settings, including residential driveways, commercial entrances, and industrial access points. Its robust design and comprehensive features ensure reliable and long-lasting performance. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

ROGER TECHNOLOGY KIT R23/373 - Above Ground Swing Gate Kit | 3.5m Leaf

Product Overview The KIT R23/373 is a complete above ground swing gate solution, ideal for residential and commercial properties with swing gates that have leaves up to 3.5 meters in length. This kit includes all the necessary components for a reliable and efficient installation. Key Features Suitable for swing gates with leaves up to 3.5 meters 230V AC power supply Irreversible electromechanical motors Mechanical limit switch for precise control What's in the Box 2x R23/372 230V Motor(s) H70/200AC/BOX Control Board 2x E80/TX52R/2 Remote Controls H93 Receiver R90/F2ES Photocells Flashing Light Antenna Specifications FeatureSpecification Power Supply 230V AC - 50Hz Motor Power Supply 230V AC Power Rating 200W Frequency of Use 50% Torque 400 N m Manoeuvre Speed 1.5 Rpm Opening Time 14 s Protection Level IP43 Dimensions (L x W x H) 355 x 190 x 160 mm Product Weight 35.2 Kg Accessories Standard Accessories KT208: Plate for fixing to post R23 series KT218: Gate pull bracket for series articulated LT302: Short arms for articulated motor Applications The KIT R23/373 is perfect for a variety of settings, including residential driveways, commercial entrances, and industrial access points. Its robust design and comprehensive features ensure reliable and long-lasting performance. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

ROGER TECHNOLOGY SYNUS/2 Dual Code Transmitter | Fixed & Rolling Code | 433.92 MHz

Product Overview The SYNUS/2 dual code transmitter is a versatile remote control device that operates at a frequency of 433.92 MHz. It offers the flexibility of both fixed code and rolling code modalities, making it suitable for a wide range of applications. With 2 channels and a built-in radio for copying fixed codes, this transmitter ensures reliable and secure operation. Key Features Dual code modality: Fixed code or Rolling code Operating frequency: 433.92 MHz 2 channels Radio for copying fixed codes Maximum open field range: 150 meters Compact and lightweight design Specifications FeatureSpecification Standard Power 3V DC Absorption 8mA Operating Temperature -10 to +55 °C Number of Channels 2 Codification Fix code or Rolling Code Modulation AM/ASK Carrier Frequency 433.92 MHz Number of Combinations 65,536 (Fix code) - 4,294,967,296 (Rolling code) Types of Fixed Codes Clonable MANCHESTER, PCM, Max. 64bit Number of Bits (Identification Code) 16 (Fix code) - 32 (Rolling code) Number of Bits Transmitted 28 (Fix code) - 144 (Rolling code) Radio for Copy Yes (only fixed code) Maximum Distance in Open Field 150 meters Battery Mod "CR2032" 3V Dimensions (L x W x H in mm) 38 x 68 x 11 Product Weight Packed (Kg) 0.04 Applications The SYNUS/2 dual code transmitter is ideal for use in residential, commercial, and industrial environments where secure and reliable remote control is required. Its ability to operate in both fixed and rolling code modes ensures compatibility with various systems and enhances security. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

Roger Technology H93/RX20/I | Plug-in Receiver | 2 Channels, 433.92 MHz

Product Overview The H93/RX20/I is a plug-in receiver designed for use with control unit series H70, B70, EDGE, and CTRL. It operates on a standard power of 5V DC and features 2 channels, making it ideal for various gate automation applications. With its fix code modulation and AM/ASK carrier frequency of 433.92 MHz, this receiver ensures reliable performance and secure communication. Key Features Standard power: 5V DC Absorption: 15mA Operating temperature: -10°C to +55°C Number of channels: 2 Codification: Fix code Modulation: AM/ASK Carried frequency: 433.92 MHz Exit: Open collector Storable codes: 50 Sensibility: -107 dBm Input impedance: 50 Ω Maximum dimensions (L x W x H): 34 x 31 x 12 mm Product weight packed: 0.02 kg Product Description The H93/RX20/I plug-in receiver by Roger Technology is engineered for seamless integration with control units in the H70, B70, EDGE, and CTRL series. Operating on a 5V DC power supply with a low absorption of 15mA, this receiver is energy-efficient and suitable for continuous use in gate automation systems. It features 2 channels and supports fix code codification, providing a secure and reliable connection with a modulation of AM/ASK at a carried frequency of 433.92 MHz. The receiver has a high sensitivity of -107 dBm and an input impedance of 50 Ω, ensuring effective signal reception and transmission. The compact design of the H93/RX20/I, with dimensions of 34 x 31 x 12 mm and a weight of 0.02 kg when packed, allows for easy installation and integration into existing systems. It can store up to 50 codes, making it versatile and suitable for various applications in gate automation. Technical Support Enhance your gate automation system with the H93/RX20/I plug-in receiver. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology H85/TDR/E | Radio Keypad Selector | 12 Digit, 4 Channel

Product Overview The H85/TDR/E is a radio keypad selector with 12 digit numbers designed for secure and efficient access control. It features 4 channels and is suitable for both rolling code and fix code transmission, making it a versatile choice for various gate automation systems. Key Features Operating temperature: -10°C to +55°C Protection level: IP54 Average consumption when keypad active: 12 mA Number of user codes storable: 450 Maximum number of digits per user code: 6 Minimum number of digits per user code: 3 Codification: Fix code - Rolling Code Modulation: AM/ASK Carried frequency: 433.92 MHz Number of combinations: 65536 (fix code) - 4.294.967.296 (rolling code) Number of bits of the identification code: 16 (fix code) - 32 (rolling code) Number of bits transmitted: 28 (fix code) - 144 (rolling code) Battery: 2 x CR2032 Battery life: Minimum 2 years with 10 activations/day Installation type: External Maximum dimensions (L x W x H): 75 x 77 x 42 mm Product weight packed: 0.2 kg Product Description The H85/TDR/E radio keypad selector by Roger Technology is a reliable solution for secure access control. It supports up to 450 user codes with each code ranging from 3 to 6 digits, providing flexibility and security for various applications. The keypad operates on a carried frequency of 433.92 MHz and supports both fix code and rolling code transmissions. With an IP54 protection level, the H85/TDR/E is designed for external installation, ensuring durability and resistance against dust and water ingress. The keypad consumes an average of 12 mA when active and is powered by two CR2032 batteries, offering a battery life of at least 2 years with 10 activations per day. The modulation type is AM/ASK, and the number of combinations is extensive, with 65536 combinations for fix code and over 4.29 billion combinations for rolling code. The product dimensions are compact at 75 x 77 x 42 mm, and it weighs 0.2 kg when packed, making it easy to install and handle. Technical Support Ensure secure and efficient access control with the H85/TDR/E radio keypad selector. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology H70/105AC/BOX | Control Unit | 1 Motor 230V AC, Slow Down Feature

Product Overview The H70/105AC/BOX is a versatile control unit designed for operating 1 asynchronous monophase motor at 230V AC - 50Hz. It features a built-in slow down function and comes encased in a durable plastic box, providing IP56 protection against dust and water. Key Features Power Line Supply: 230V AC - 50Hz Operating Temperature: -10°C to +55°C Protection Level: IP56 Number of Motors Activated: 1 asynchronous monophase Max Power per Motor: 600W (230V AC) Max Courtesy Light Charge: 100W 230Vac - 25W 24Vac/dc Max Power Gate Open Light: 2W 24Vac Max Voltage Accessories Output: 300mA - 24Vcc Max Flashing Light Charge: 440W 230Vac - 25W 24Vac/dc Maximum Dimensions (L x W x H): 200 x 255 x 99 mm Product Weight Packed: 2 kg Number of Items per Pallet: 50 Product Description The H70/105AC/BOX control unit by Roger Technology is designed for efficient operation of one asynchronous monophase motor at 230V AC - 50Hz. Featuring a slow down function, it ensures smooth and secure gate movements, reducing wear and tear on the motor and gate structure. This control unit is encased in a robust plastic box with IP56 protection, offering resistance against dust and water, making it suitable for various environmental conditions. It operates within a temperature range of -10°C to +55°C, ensuring reliability across different climates. The H70/105AC/BOX supports a maximum motor power of 600W (230V AC) and provides outputs for courtesy lights, gate open lights, and flashing lights with respective maximum charges. The compact dimensions (200 x 255 x 99 mm) and a weight of 2 kg make it easy to install and integrate into existing gate automation systems. Each pallet can hold up to 50 units, facilitating bulk orders and distribution. Technical Support Enhance your gate automation system with the H70/105AC/BOX control unit, featuring robust construction and comprehensive functionality. For more details or to place an order, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology H23/282 | Electromechanical Articulated Motor | 230V AC, Irreversible, Swing Gates up to 2.8m

Product Overview The H23/282 is an electromechanical articulated motor designed for swing gates with a leaf length of up to 2.8 meters. Operating on 230V AC - 50Hz power supply, this motor offers robust performance with an irreversible mechanism, ensuring secure gate operation. Key Features Power Line Supply: 230V AC - 50Hz Motor Power Supply: 230V AC Power Rating: 200W Frequency of Use: 50% Torque: 300 N m Operating Temperature: -20°C to +55°C Protection Level: IP43 Reducer Type: Irreversible Manoeuvre Speed: 1.2 Rpm Opening Time at 90°: 12 seconds Motor Thermal Protection: 150°C Incorporated Condenser: 10 µF Limit Switch: Microswitch in opening and closing Encoder: Optical Dimensions (L x W x H): 230 x 190 x 284 mm Product Weight Packed: 13.3 kg Number of Items per Pallet: 44 Product Description The H23/282 electromechanical articulated motor by Roger Technology is designed for robust and reliable operation of swing gates up to 2.8 meters in length. Operating on 230V AC - 50Hz power supply, this motor offers a power rating of 200W and a frequency of use of 50%, ensuring it meets the demands of regular gate operations. The motor features an irreversible mechanism, providing secure and consistent gate closure. With a torque of 300 N m, the H23/282 ensures powerful and smooth gate movements. It operates within a temperature range of -20°C to +55°C and has an IP43 protection level, making it suitable for various environmental conditions. The H23/282 has a manoeuvre speed of 1.2 Rpm and can open gates to 90° within 12 seconds. It is equipped with motor thermal protection set at 150°C, an incorporated condenser of 10 µF, and an optical encoder for precise control. The limit switch, a microswitch, ensures accurate stopping in both opening and closing positions. Compact in design, the motor's dimensions are 230 x 190 x 284 mm, and it weighs 13.3 kg when packed. Each pallet can hold up to 44 units, making it convenient for bulk transportation and storage. Technical Support Ensure smooth and reliable operation of your swing gates with the H23/282 electromechanical motor. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology G90/F4ES | Synchronized External Photocells | 24V AC/DC, IP55

Product Overview The G90/F4ES is a pair of synchronized external photocells designed to enhance the safety and reliability of gate automation systems. Operating on 24V AC 50Hz or 24V DC power, these photocells provide IP55 protection against dust and water, ensuring durability in various environmental conditions. Key Features Standard Power: 24V AC 50Hz - 24V DC Absorption: TX 18 mA - RX 27 mA Operating Temperature: -20°C to +55°C Protection Level: IP55 Maximum Distance in Open Field: 10 - 15 meters Maximum Number of Photocells Synchronized: 4 pairs Relay Contacts Max Current: 0.5A RX Relay Contacts Max Voltage: 30V Installation Type: External Dimensions (L x W x H): 77 x 75 x 29.2 mm Product Weight Packed: 0.2 kg Product Description The G90/F4ES synchronized external photocells by Roger Technology are designed to ensure precise and secure gate operation. Operating on 24V AC 50Hz or 24V DC power, these photocells offer reliable performance with a low absorption rate of TX 18 mA and RX 27 mA. With an operating temperature range of -20°C to +55°C and an IP55 protection level, the G90/F4ES photocells are resistant to dust and water ingress, making them suitable for various environmental conditions. They can be installed externally and are effective within a maximum distance of 10 to 15 meters in open fields. The G90/F4ES can synchronize up to 4 pairs of photocells, providing flexibility for different installation requirements. The relay contacts support a maximum current of 0.5A RX and a maximum voltage of 30V, ensuring compatibility with various gate automation systems. The compact dimensions (77 x 75 x 29.2 mm) and lightweight design (0.2 kg packed) make these photocells easy to install and integrate. Technical Support Ensure precise and secure gate operation with the G90/F4ES synchronized external photocells. For more details or to place an order, contact us today. Our team is ready to assist you with any questions.

Roger Technology G90/F2ES | External Photocells Synchronized | 12/24V AC/DC, IP55

Product Overview The G90/F2ES is a pair of synchronized external photocells designed for reliable operation in gate automation systems. These photocells operate on 12/24V AC/DC power and provide IP55 protection against dust and water ingress, ensuring durability in various environmental conditions. Key Features Standard Power: 12/24V AC 50Hz - 12/24V DC Absorption: TX=19mA, RX=20mA Operating Temperature: -20°C to +55°C Protection Level: IP55 Maximum Distance in Open Field: 10 - 15 meters Maximum Number of Photocells Synchronized: 2 Relay Contacts Max Current: 0.5A RX Relay Contacts Max Voltage: 30V Installation Type: External Dimensions (L x W x H): 77 x 75 x 29.2 mm Product Weight Packed: 0.2 kg Product Description The G90/F2ES external photocells by Roger Technology are designed to ensure precise and secure gate operation. Operating on 12/24V AC/DC power, these synchronized photocells offer reliable performance with a low absorption rate of TX=19mA and RX=20mA. With an operating temperature range of -20°C to +55°C and an IP55 protection level, the G90/F2ES photocells are resistant to dust and water ingress, making them suitable for various environmental conditions. They can be installed externally and are effective within a maximum distance of 10 to 15 meters in open fields. The G90/F2ES can synchronize up to 2 pairs of photocells, providing flexibility for different installation requirements. The relay contacts support a maximum current of 0.5A RX and a maximum voltage of 30V, ensuring compatibility with various gate automation systems. The compact dimensions (77 x 75 x 29.2 mm) and lightweight design (0.2 kg packed) make these photocells easy to install and integrate. Technical Support Ensure precise and secure gate operation with the G90/F2ES external photocells. For more information or to inquire about purchasing, contact us today. Our team is ready to assist you with any questions.

Roger Technology G30 | Sliding Gates Motor | 230V AC, Up to 2200 kg, Irreversible

Product Overview The G30 sliding gates motor is engineered for robust performance in demanding applications, supporting gates up to 2200 kg. Operating on 230V AC power, this motor is designed with built-in features including a control unit, optical encoder, and magnetic limit switch for precise and secure gate operation. Key Features 230V AC power supply Irreversible motor Supports gates up to 2200 kg Magnetic limit switch for accurate positioning Built-in control unit (H70/104AC) Optical encoder for enhanced control Specifications  G30/1804G30/2204 Max Gate Weight (kg) 1800 2200 Power Line Supply 230V AC - 50Hz 230V AC - 50Hz Motor Power Supply 230V AC 230V AC Power Rating (W) 520 580 Frequency of Use 50% 50% Thrust (N) 1200 - Reductor Type Irreversible Irreversible Manoeuvre Speed (m/min) 9.5 (0.16) 9.5 (0.16) Motor Thermal Protection (°C) 150 150 Incorporated Condenser (µF) 18 18 Limit Switch Magnetic Magnetic Onboard Control Unit H70/104AC - Encoder Optical Optical Type Exit Gear Z17/mod 4 Z17/mod 4 Dimensions (L x W x H in mm) 346 x 180 x 362 346 x 180 x 362 Accessories Standard Accessories: KT215: Fixing plate with stay bolts and screws for the G30 series. MC775: Kit magnetic limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP. Other Accessories: GA550: Galvanized steel rack 22x22x1000 module 4. GA551: Galvanized steel rack 30x12x1000 module 4 with spacers and screws. GA554: Pocket of 6 spacers (2.5 cm) and screws. KT222: Raised fixing plate for G30 series (+3.5 cm). R99/C/001: Signboard "Automatic Opening". LT328: Pinion Z17 mod. 4 with increased thickness H.38 for series R30 - G30 - E30 (except BG30/1504/HS). LT331: Pinion Z11 mod. 6 only for series G30 - BG30 (except BG30/1504/HS). GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000. R99/C/001AL: Signboard "Automatic Opening" Aluminium version. Technical Support For more details or inquiries about the G30 sliding gates motor, contact us today. Our team is ready to assist with your specific requirements.

Roger Technology FIFTHY/24 | LED Flashing Light | 24V AC/DC, Integrated Antenna

Product Overview The FIFTHY/24 LED flashing light series is crafted for reliable signaling applications. Operating on 24V AC/DC with a tolerance of +/- 10%, this light is equipped with an integrated antenna and offers robust features suitable for diverse environments. Key Features Standard power: 24V AC/DC +/- 10% Operating temperature: -20°C to +55°C Protection level: IP55 Max flashing light charge: 6.5W Tuning frequency: 433.920 MHz Modulation: 1Hz Type of light: 24 LED Maximum dimensions (L x W x H): 124 x 45 x 164 mm Product weight (packed): 0.3 Kg Product Description The FIFTHY/24 LED flashing light by Roger Technology is designed for reliable signaling in diverse environments. It operates efficiently on 24V AC/DC with a tolerance of +/- 10%. This robust light is equipped with an integrated antenna for improved signal reception and offers a high visibility 24 LED configuration. With an operating temperature range of -20°C to +55°C and an IP55 protection level, the FIFTHY/24 is built to withstand varying environmental factors, making it ideal for outdoor use. It features efficient power usage with a maximum flashing light charge of 6.5W and operates at a tuning frequency of 433.920 MHz with 1Hz modulation. The compact dimensions (124 x 45 x 164 mm) and lightweight design (0.3 Kg packed) make it easy to install and integrate into various industrial and commercial applications where clear signaling is crucial. This LED flashing light ensures reliable operation even in challenging conditions. Applications The FIFTHY/24 LED flashing light is ideal for industrial and commercial sectors where clear and reliable signaling is essential. It ensures visibility and safety in various operating conditions. Technical Specifications For further technical details or inquiries about the FIFTHY/24 LED flashing light, please contact us. Our team is available to assist you with any questions.

Roger Technology FIFTHY/230 | LED Flashing Light | 230V-115V, Integrated Antenna

Product Overview The FIFTHY/230 LED flashing light series is designed for reliable signaling in various environments. Operating on both 230V AC and 115V AC (with a variance of +/- 10%), this light is equipped with an integrated antenna and offers robust features suitable for outdoor use. Key Features Standard power: 230V AC - 115V AC +/- 10% Operating temperature: -20°C to +55°C Protection level: IP55 Max flashing light charge: 6.5W Tuning frequency: 433.920 MHz Modulation: 1Hz Type of light: 24 LED Maximum dimensions (L x W x H): 124 x 45 x 164 mm Product weight (packed): 0.3 Kg Product Description The FIFTHY/230 LED flashing light by Roger Technology is designed for reliable signaling in various environments. It operates efficiently on both 230V AC and 115V AC with a variance of +/- 10%. This robust light is equipped with an integrated antenna for enhanced signal reception and offers a high visibility 24 LED configuration. With an operating temperature range of -20°C to +55°C and an IP55 protection level, the FIFTHY/230 is built to withstand varying weather conditions, making it ideal for outdoor use. It features efficient power usage with a maximum flashing light charge of 6.5W and operates at a tuning frequency of 433.920 MHz with 1Hz modulation. The compact dimensions (124 x 45 x 164 mm) and lightweight design (0.3 Kg packed) make it easy to install and integrate into various industrial and commercial applications where clear signaling is crucial. This LED flashing light ensures reliable operation even in challenging environments. Applications The FIFTHY/230 LED flashing light is suitable for industrial and commercial applications where clear signaling is crucial. It ensures reliable operation even in challenging environments. Technical Specifications For further technical details or inquiries about the FIFTHY/230 LED flashing light, please contact us. Our team is ready to provide assistance and support.

Roger Technology BR20/400R | Brushless Swing Gate Motor | Up to 4m, Reversible, 36V

Product Overview The BR20/400R is a high-performance brushless electromechanical actuator designed by Roger Technology for swing gates with leaves up to 4 meters in length. It features reversible operation, ensuring the gate remains securely locked in the open and closed positions during power on and unlocks in the event of a power failure for emergency access. Key Features Efficient power supply with 230V AC, 50Hz input Motor power supply: 36V DC Power rating: 210W Designed for intensive use with a thrust capacity of 100 - 1500N Operating temperature range: -20°C to +55°C Protection level: IP44 Reversible reducer type with mechanical stoppers for both opening and closing Manoeuvre speed: 2.22 cm/s Opening time: 18-28 seconds Stroke: 520 mm Digital native encoder, SENSORLESS, 48 PPR Operates up to 1000 cycles per day (opening/closing, 24 hours non-stop) Maximum dimensions (L x W x H): 1088.5 x 120 x 165 mm Product weight (packed): 9.9 Kg Product Description The BR20/400/R brushless swing gate motor by Roger Technology is designed to deliver high performance and reliability for swing gates with leaves up to 4 meters long. This electromechanical actuator features reversible operation, which keeps the gate securely locked in both open and closed positions when powered and allows it to unlock during power failures for emergency access. With a power supply of 230V AC at 50Hz and a motor power of 36V DC, this motor has a power rating of 210W, making it suitable for intensive use. It can handle a thrust capacity ranging from 100 to 1500N and operates efficiently across a temperature range from -20°C to +55°C, ensuring it performs well in various environmental conditions. The BR20/400/R has an IP44 protection level, offering resistance against dust and water splashes. Its reversible reducer type with mechanical stoppers provides precise control during opening and closing operations, with a manoeuvre speed of 2.22 cm/s and an opening time ranging from 18 to 28 seconds. The motor's stroke length is 520 mm, and it features a digital native encoder (SENSORLESS, 48 PPR) for accurate positioning. Designed for heavy-duty use, this swing gate motor can perform up to 1000 cycles per day (continuous 24-hour operation). The motor's maximum dimensions are 1088.5 x 120 x 165 mm, and it weighs 9.9 Kg when packed. Accessories Standard Accessories: KT205: Kit of 3 hinge plates, long series, for welding MC781: Kit of 2 mechanical stops for BR20, BE20 series, R20/300MS, and R20/500MS Other Accessories: R99/C/001: Signboard indicating "Automatic Opening" KT201/R: Screw-welded long front bracket KT203/R: Screw-adjustable long rear bracket KT205/R: Combination kit of screw-adjustable long rear bracket and screw-welded long front bracket R99/C/001AL: "Automatic Opening" signboard, aluminium version B71/PBX36/BOX/115: Hybrid inverter, “Network Assisted” version, compatible with 115V AC power supply B71/PBX36/BOX: Hybrid inverter, “Network Assisted” version, compatible with 230V AC power supply B71/PBX/BOX: Hybrid inverter, “Full Solar” version, exclusively powered by solar panels Technical Support For further details about the BR20/400/R Brushless Swing Gate Motor or to discuss specific requirements, please contact us. Our team is ready to assist with any inquiries.

ROGER TECHNOLOGY BM30 Brushless Sliding Gate Motor | 24v | Up to 400kg | High Speed

Product Overview The BM30 Brushless Sliding Gate Motor is designed for super intensive use, ideal for sliding gates up to 400kg. This 24v high-speed electromechanical motor is irreversible and comes with a built-in digital controller from the B70 series. It is perfect for both residential and commercial applications, offering robust performance and reliability. Motor Options BM30/303/HS - 24v | Up to 400kg | High Speed | Mechanical limit switch BM30/304/HS - 24v | Up to 400kg | High Speed | Magnetic limit switch Key Features High speed operation Supports gates up to 400kg Super intensive use Available with mechanical or magnetic limit switches Low voltage 24v motor Specifications SpecificationDetails Max Gate Weight 400 kg Power Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating 125W Thrust 50 - 350N Protection Level IP43 Limit Switch Mechanical or magnetic (depending on chosen option) Onboard Control Unit B70/1DC Manoeuvre Speed 26 m/min (0.44 m/s) Product Dimensions (L x W x H) 250 x 165 x 290 mm Product Weight 10.4 kg Items Per Pallet 44 Accessories Standard Accessories KT223: Fixing plate with stay bolts and screws for M30 series. MC773: Kit mechanical limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP. Other Accessories GA550: Galvanised steel rack 22x22x1000 module 4. GA551: Galvanised steel rack 30x12x1000 module 4 with spacers and screws. GA554: Pocket of 6 spacers (2.5 cm) and screws. KT220: Raised fixing plate for M30 series (+3 cm). R99/C/001: Signboard "Automatic Opening". GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000. R99/C/001AL: Signboard "Automatic Opening" Aluminium version. B71/PBX24/BOX: Hybrid inverter, “Network Assisted” version, for powering the automation with a mains voltage of 230V AC. B71/PBX24/BOX/115: Hybrid inverter, “Network Assisted” version, for powering the automation with a mains voltage of 115V AC. B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for brushless digital controllers. Additional Information For further inquiries or additional information regarding the BM30 Brushless Sliding Gate Motor, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/008 Bionik Brushless Barrier | Up to 8 Meters | 36V DC | Barrier Only

Product Overview The BI/008 Bionik Brushless Barrier is engineered for super-intensive use, capable of extending up to 8 meters. Powered by a robust 36V DC motor, this barrier includes a built-in digital control panel and encoder, ensuring reliable and efficient operation for large-scale applications. Note that the product does not include a boom, but it is compatible with BA/128/4 booms and requires a KT244 fixing plate. Key Features Super intensive use capability Extended reach up to 8 meters Robust 36V DC brushless motor High reliability and efficiency Compatible with BA/128/4 booms Specifications SpecificationBI/008 Barrier Length Up to 8 mt Power Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption Max. 18A Power Rating 300W Torque 10 - 400 N m Operating Temperature -20 to +55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 9 - 29 sec Control Unit CTRL Digital Controller 36V DC Encoder Digital native + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Details Cabinet painted RAL9006 arabesque grey, head and boom support in black arabesque silver paint, boom painted RAL9010 matt Release System European Key cylinder Battery Recovery Available (optional) Synchronization BUS Master/Slave synchronization Operating Cycles (24 hours) 2500 cycles Dimensions (L x W x H) 500 x 270 x 1237 mm Weight 104.7 kg Accessories Below are the accessories suitable for the BI/008 Series: KT244: Fixing plate with stay bolts and screws for BI/008. ALED/8C: 8-metre LED strip with connection cable for barrier boom (red colour). BAFS/01: Fixed support for bars. BAFS/02: Fixing support, adjustable. BAFS/03: Fixing support with bolt predisposition for bars. BAFS/04: Fixing support adjustable, with bolt predisposition for bars. BAMS/01: Mobile support for bars. BARK/02: Barrier skirting in aluminum, with stainless steel screws mounted on bronze bushings. Single module of length 2 meters. BT12V45: Battery 12V 4.5 Ah (1 pc). DLD1/24: Single loop detector. DLD2/24: Dual loop detector. BI/BAT/KIT: Kit for emergency batteries charger for brushless digital controller CTRL 36V DC with plug-in card, with 2 recovery batteries 12V DC, 4.5 Ah. Kit for BIONIK barrier. BI/BCHP: Plug-in card, batteries charger, for brushless digital controller CTRL 36V DC, without recovery batteries, for BIONIK barrier. B73/LTM: RGB boom light and traffic light control device for CTRL. ALED/8C/RGB: 8-metre multicoloured RGB LED strip with connection cable for barrier boom. BI/BLED/8/RGB: Multicoloured RGB LED strip with connection cable for BI/008 barrier header. CRA/BAR/M90: Post for photocells M90/F2ESO - M90/F4ESO for spaced installation on a barrier cabinet (+23 cm). Additional Information For more details on the BI/008 Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/006 Series Bionik Brushless Barriers | 36V DC | Up to 6 Meters | Barrier Only

Product Overview The BI/006 Series Bionik Brushless Barriers are designed for managing booms up to 6 meters, making them ideal for high-traffic zones and parking solutions. These 36V DC barriers are built for super intensive use, offering up to 4000 operating cycles daily. The BI/006 series features two versions, including the BI/006 with a painted RAL9006 cabinet and the BI/006/IS with a brushed stainless steel AISI 304 housing unit. Variants BI/006 - Compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. BI/006/IS - Stainless steel housing, compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. Key Features Intuitive operation Adaptable design Super intensive use capability Aesthetic finish High reliability and durability Battery backup available Specifications SpecificationBI/006BI/006/IS Barriers Up to 6 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 220W Frequency of Use Super intensive use Torque 10 - 300 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 4 - 8 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 4000 cycles Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 75.1 Kg 73.6 Kg Accessories Below are the accessories suitable for the BI/006 Series: KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/006 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/004 Series Bionik Brushless Barriers | 36V DC | Up to 4 Meters | Barrier Only

Product Overview The BI/004 Series Bionik Brushless Barriers are engineered for managing booms up to 4 meters, making them ideal for high-traffic zones and parking solutions. Equipped with control units and encoders, these 36V DC barriers are built for super intensive use. Note that each product variant does not include a boom, and separate models are suitable for different booms and require specific fixing plates. Variants BI/004 - Suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004/IS - Stainless steel housing, suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004HP - Super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230 fixing plate. BI/004HP/IS - Brushed stainless steel AISI 304 housing unit, super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230/IS fixing plate. Key Features Brushless motor Super intensive use capability Rapid movement Superior construction Safety and reliability Battery backup available Specifications SpecificationBI/004BI/004/ISBI/004HPBI/004HP/IS Barriers Up to 4 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption 0-15A max. 15A 0-15A max. 15A Power Rating 220W Frequency of Use Continuous use Continuous use Super intensive use Super intensive use Torque 0 - 200 N m 0 - 200 N m 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: plastic RAL9005; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 5000 cycles 5000 cycles Accessories Below are the accessories suitable for the BI/004 Series: KT240: Fixing plate for BI/004 and BI/004/IS models KT230: Fixing plate for BI/004HP and KT230/IS for BI/004HP/IS B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/004 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/001 Series Bionik Brushless Barriers | 36V DC | Up to 3 Meters | Barrier Only

Product Overview The BI/001 Series Bionik Brushless Barriers are designed for super intensive use, capable of managing booms up to 3 meters long. Equipped with onboard digital control panels, encoders, and superior construction quality, these barriers are ideal for modern parking solutions and high-traffic zones. Note that each product variant does not come with a boom, and specific models require different booms and fixing plates. Variants BI/001PE - Suitable for elliptical boom (BA/90/3). Requires KT230 fixing plate. BI/001PC - Designed for cylindrical boom arm (BA/60/3). Requires KT230 fixing plate. Key Features Rapid movement Brushless motor Superior construction Safety first High capacity Battery backup Specifications SpecificationBI/001PEBI/001PC Barriers Up to 3 mt long Up to 3 mt long Power Line Supply 230V AC - 50Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 450W Frequency of Use Super-intensive use to Continuous use Super-intensive use to Continuous use Torque 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 IP54 Reductor Type Irreversible Irreversible Opening Time at 90° 2 ÷ 4 (sec) 1 ÷ 3 (sec) Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 74.7 Kg 87.6 Kg Accessories Power Supply 24V DC Operating Cycles per Day 8000 cycles 12000 cycles Standard Accessories for BI/001PE KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PE SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Standard Accessories for BI/001PC KT230: Fixing plate for BI series SP/61/01: Spring for barriers B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PC BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector BA/60/3: Aluminium barrier arm BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit KT242: Cable passage kit for barriers CRA/BAR: Photocell post for barriers ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Barrier stickers pack B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Photocell post for M90 series Additional Information For more details on the BI/001 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BH30 Brushless Sliding Gate Motor | 24V | Up to 1000kg | High Speed & Reversible Options

Product Overview The BH30 Brushless Sliding Gate Motor is an electromechanical 24V BRUSHLESS motor designed for low voltage and super intensive use. This motor is equipped with a native encoder onboard and a built-in digital controller from the B70 series. It is ideal for sliding gates weighing up to 1000kg. The BH30 motor is available in high-speed and reversible editions, providing robust performance and reliability for both residential and commercial applications. Key Features 24V Brushless motor Super intensive use Native encoder onboard Mechanical or magnetic limit switch options Irreversible or reversible models High-speed motors available Supports sliding gates up to 1000kg Operator Options BH30/603/HS - Up to 600kg - High Speed - Mechanical limit switch BH30/604/HS - Up to 600kg - High Speed - Magnetic limit switch BH30/803 - Up to 1000kg - Mechanical limit switch BH30/804 - Up to 1000kg - Magnetic limit switch BH30/804/R - Up to 800kg - Reversible - Magnetic limit switch Specifications SpecificationBH30/603/HSBH30/604/HSBH30/803BH30/804BH30/804/R Max Gate Weight (kg) 600 600 1000 1000 800 Power Line Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating (W) 130 130 200 200 140 Frequency of Use Intensive use Thrust (N) 50 - 500 50 - 500 50 - 1000 50 - 1000 60 - 600 Operating Temperature (°C) -20 to +55 Protection Level IP43 IP44 IP43 IP43 IP43 Reductor Type Irreversible Irreversible Irreversible Irreversible Reversible Manoeuvre Speed (m/min) 26 (0.4) 26 (0.4) 12 (0.20) 12 (0.20) 18 (0.30) Limit Switch Mechanical Magnetic Mechanical Magnetic Magnetic Onboard Control Unit B70/1DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries Recovery Optional 2 internal battery 12V 1.2AH - Optional 2 external battery 12V 4.5AH Type Exit Gear Z15/mod 4 Operating Cycles per Day 800 800 1300 1300 1000 Maximum Dimension Product (L x W x H in mm) 315 x 165.8 x 329 Product Description The BH30 Brushless Sliding Gate Motor is a versatile and reliable solution for operating sliding gates up to 1000kg. With a 24V low voltage design and super intensive use capability, it is perfect for both residential and commercial settings. The motor features a built-in digital controller from the B70 series and a native encoder for precise control. Available in high-speed and reversible models, the BH30 motor meets various application requirements. The reversible motors lock in the open and closed positions when powered, providing enhanced security and an emergency exit option during power outages. Standard Accessories KT214: Fixing plate with stay bolts and screws for H30 series MC773: Kit mechanical limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP Other Accessories GA550: Galvanised steel rack 22x22x1000 module 4 GA551: Galvanised steel rack 30x12x1000 module 4 with spacers and screws GA554: Pocket of 6 spacers (2.5 cm) and screws KT221: Raised fixing plate for H30 series (+3.5 cm) R99/C/001: Signboard "Automatic Opening" KT214/SC: Adapter plate with stay bolts and screws for H30 series B71/BC: Batteries charger for Brushless digital controller B70/1DC BT12V12: Battery 12V 1.2 Ah (1 pc) BT12V45: Battery 12V 4.5 Ah (1 pc) HT418: External box without batteries, for battery BT12V45 (12V DC 4.5 Ah) KT214/SF: Adapter plate with stay bolts and screws for H30 series GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000 KT214/SN: Adapter plate with stay bolts and screws for H30 series LT330: Chain drive kit for H30 - BH30 series LT334: 1/2" X 5/16" 5 meter chain piece for LT330 with joint R99/C/001AL: Aluminium version of the "Automatic Opening" signboard B71/PBX24/BOX: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 230V AC B71/PBX24/BOX/115: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 115V AC B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for brushless digital controllers HT421: External box without batteries, for battery BT12V45 (4.5 Ah), BT12V70 (7 Ah), and BT12V120 (12 Ah), up to a maximum of 3 batteries Additional Information For more details on the BH30 Brushless Sliding Gate Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BH23 Brushless Motor | Up to 2.8m Swing Gates | 36V

Product Overview The BH23 Brushless Motor is an electromechanical articulated motor designed for swing gates up to 2.8 meters. This 36V low voltage motor is ideal for super intensive use, featuring a native encoder onboard and an irreversible design. It includes mechanical stoppers for both opening and closing, and comes with short arms as standard. The BH23 is available in both high-speed and standard editions, making it suitable for a variety of residential and commercial applications. Key Features 36V Brushless motor Irreversible design High-speed variant available Supports swing gates with leaves up to 2.8m Mechanical stoppers in opening and closing Super intensive use Native encoder onboard Operator Options BH23/252/HS - Up to 2.5m - High Speed BH23/282 - Up to 2.8m Specifications SpecificationBH23/252/HSBH23/282 Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 36V 36V Power rating 160W 160W Frequency of use Intensive use Intensive use Torque 50 - 200 N m 50 - 280 N m Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP43 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 1.5 - 4 Rpm 1 - 1.9 Rpm Opening time 10-18 s 12-20 s Limit switch Mechanical stopper in opening and closing Mechanical stopper in opening and closing Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours no stop) 1200 1900 Product Description The BH23 Brushless Motor is a high-performance solution for swing gates, offering robust and reliable operation. The motor's irreversible design and native encoder provide precise control and enhance safety by locking the gate in place when powered. The high-speed variant (BH23/252/HS) is perfect for gates up to 2.5 meters, offering rapid operation, while the standard BH23/282 model supports gates up to 2.8 meters with increased torque for heavier gates. With a power rating of 160W and operating cycles up to 1900 per day, the BH23 Brushless Motor is designed for intensive use, making it suitable for both residential and commercial applications. The motor's mechanical stoppers ensure accurate and safe positioning of the gate in both open and closed positions. Additional Information For more details on the BH23 Brushless Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY Fixed Support Post for Bionik Boom Arms | Various Configurations

Product Overview The fixed support posts for Bionik barrier boom arms are designed to provide robust and reliable support for various boom arm configurations. Available in multiple models, these support posts cater to different installation needs, including adjustable options, bolt predisposition, and vandal-proof features. Each support post ensures stability and durability, enhancing the performance and longevity of your Bionik barrier system. Key Features Multiple configurations available Adjustable and fixed options Bolt predisposition for easy installation Vandal-proof model with magnetic suction cup and demagnetizer card Designed for compatibility with Bionik barrier boom arms Durable construction for long-lasting use Product Description The Fixed Support Posts for Bionik Boom Arms are essential components for maintaining the stability and functionality of your barrier system. These support posts are available in various configurations to meet specific installation requirements: Product Guide Product CodeDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Specifications ModelDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Installation and Usage Each fixed support post is designed for easy installation and compatibility with Bionik barrier boom arms. The adjustable models allow for precise alignment, while the bolt predisposition versions simplify the mounting process. The vandal-proof model (BAFS/05) includes a magnetic suction cup and a B72/DGS demagnetizer card, providing enhanced security and reliability in high-risk environments. Additional Information For more details on the fixed support posts for Bionik boom arms or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BCHP/EXT Batteries Charger Kit | Emergency Charger for Brushless Digital Controller EDGE1/BOX - B70/1DCHP 36V DC

Product Overview The B71/BCHP/EXT Kit is an emergency battery charger designed for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BCHP/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.2 Kg Product Description The B71/BCHP/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BCHP/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current 400 mA Product Weight (Packed) 5.2 Kg Installation and Usage The B71/BCHP/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller EDGE1/BOX - B70/1DCHP remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BCHP/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/EXT Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/EXT Kit is an emergency battery charger designed for the Brushless digital controller B70/2DC/BOX 24V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BC/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.6 Kg Product Description The B71/BC/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BC/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br close jumper) 400 mA Product Weight (Packed) 5.6 Kg Installation and Usage The B71/BC/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BC/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/BOX Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/BOX Kit is an emergency battery charger designed for use with the Brushless digital controller B70/2DC/BOX 24V DC. This robust and efficient charging solution ensures your system remains operational during power outages, providing peace of mind and reliability. The kit supports various power line supplies and offers flexible charging options to meet your needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC Adjustable charge current options Compact dimensions: 243mm x 49mm x 89mm Lightweight: 0.5 Kg Product Description The B71/BC/BOX Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit is designed to support power line supplies ranging from 16V AC to 24V AC and operates effectively in a wide temperature range of -20°C to +55°C. With a maximum input power of 15W, the charger ensures that your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The adjustable charge current options, 250 mA for standard charging and 400 mA for fast charging (with the B71/BC/EXT option), provide flexibility to meet different battery capacities and charging needs. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br open jumper) 250 mA (for 1200mAh batteries) Charge Current (br close jumper) 400 mA (optional, for fast charge of 4500mAh batteries) - B71/BC/EXT Dimensions (L x W x H) 243mm x 49mm x 89mm Product Weight (Packed) 0.5 Kg Installation and Usage The B71/BC/BOX Kit is easy to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Follow the included instructions to connect the charger to your existing system, and choose the appropriate charge current based on your battery capacity. For fast charging, use the B71/BC/EXT option to increase the charge current to 400 mA for larger batteries. Additional Information For more details on the B71/BC/BOX Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

Roger Technology Brushless B70/1DCHP Control Board | 36V Heavy-Duty, High-Speed

Product Overview The Roger Technology Brushless B70/1DCHP Control Board is a high-performance 36V control board specifically designed for heavy-duty and high-speed sliding gate applications. Featuring a digital encoder, this control board ensures precise and reliable operation, making it ideal for demanding residential and commercial environments. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 36V control board designed for heavy-duty and high-speed sliding gates Brushless technology for enhanced efficiency and durability Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various high-demand applications Product Description The Roger Technology Brushless B70/1DCHP Control Board is engineered to deliver superior performance for heavy-duty and high-speed sliding gates. This 36V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement, even in demanding conditions. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use in high-demand settings. Specifications Control Board Type Brushless Voltage 36V Application Heavy-duty and high-speed sliding gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DCHP Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling heavy-duty and high-speed sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DCHP Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

Roger Technology Brushless B70/1DC Control Board | 24V Control with Digital Encoder

Product Overview The Roger Technology Brushless B70/1DC Control Board is a state-of-the-art 24V control board designed specifically for sliding gates. Equipped with a digital encoder, this control board ensures precise and reliable operation, making it an ideal choice for both residential and commercial applications. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 24V control board designed for sliding gates Brushless technology for enhanced efficiency Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various applications Product Description The Roger Technology Brushless B70/1DC Control Board is engineered to deliver superior performance for sliding gates. This 24V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use. Specifications Control Board Type Brushless Voltage 24V Application Sliding Gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DC Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DC Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

ROGER TECHNOLOGY SMARTY Brushless Double | Swing Gate Kit | For Heavy-Duty Applications

Product Overview The SMARTY Brushless Double Swing Gate Kit is designed for above-ground installation, perfect for extremely heavy-duty applications. This kit features reversible and irreversible options with high-speed variants, suitable for swing gates with leaves up to 7 meters. Key Features 36V: High efficiency and performance. Irreversible or Reversible: Choose based on your specific needs. High Speed Variant: Available with SMARTY4/HS for faster operations. Swing Gates: Suitable for gates with leaves up to 7 meters. Product Description The SMARTY Brushless Double Swing Gate Kit is the ultimate solution for heavy-duty swing gate automation. Engineered for above-ground installation, this kit ensures robust performance for gates with leaves up to 7 meters in length. The kit offers both reversible and irreversible options, catering to various installation requirements. A high-speed variant, SMARTY4/HS, is available for faster operation. Specifications SpecificationSMARTY4/HSSMARTY5SMARTY5RSMARTY7SMARTY7R Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 200 Frequency of use Intensive use Thrust (N) 600 - 4500 600 - 7000 600 - 6500 600 - 7000 600 - 6500 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Irreversible Reversible Irreversible Reversible Manoeuvre speed (cm/s) 2 - 1 1.6 1.8 1.6 1.6 Opening time (s) 15-25 25-40 20-40 35-50 35-50 Stroke (mm) 370 370 370 520 520 Limit switch Mechanical stopper in opening and closing Recommended digital controllers 230V: EDGE1/BOX - 115V: EDGE1/BOX/115 Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR + EMA Operating cycles per day 1000 Dimensions (L x W x H mm) 1162 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 Kit Contains 2 x Operator (of your choice) 1 x EDGE1 Control Panel 2 x SYNUS/2 Transmitters 1 x H93/RX90/I Plug-in Radio Receiver 1 x M90/F4ESO 180 Photocells 1 x R91/ANI/P1 Aerial For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY SET BI/008GO - Bionik Brushless Barrier Kit 36V DC | Up to 8 Meters

Product Overview The SET BI/008GO Bionik Brushless Barrier Kit is a high-performance barrier system designed for super intensive use. This 36V DC barrier can handle booms up to 8 meters long, making it ideal for managing large entrances and exits. The kit comes complete with a control unit, on-board native encoder, and a robust fastening base with tie rods and screws, ensuring reliable and secure installation. This barrier system is perfect for commercial and industrial settings that require frequent operation. The Bionik Brushless Barrier is equipped with advanced features such as a digital native encoder, magnetic digital sensor, and BUS synchronization for master/slave operation. Key Features High Performance: 36V DC brushless motor designed for super intensive use, capable of handling up to 2500 cycles per day. Extended Reach: Supports booms up to 8 meters long, ideal for large entrances. Advanced Control: Comes with a CTRL Digital Controller and a digital native encoder for precise operation. Robust Construction: Features a painted RAL9006 arabesque grey cabinet, black arabesque silver painted head and boom support, and RAL9010 matt painted boom. Secure Locking: Equipped with a European key cylinder release system for enhanced security. Temperature Resistant: Operates efficiently in temperatures ranging from -20°C to +55°C. Easy Installation: Includes a fastening base with tie rods and screws, and boom fastening flanges. Specifications Barrier Length: Up to 8 meters Power Supply: 230V AC - 50 Hz Motor Power Supply: 36V DC Electrical Absorption: Max. 18A Power Rating: 300W Frequency of Use: Super intensive use Torque: 10 - 400 N m Operating Temperature: -20°C to +55°C Protection Level: IP54 Reductor Type: Irreversible Opening Time at 90°: 9-29 seconds Control Unit: CTRL Digital Controller 36V DC Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply: 24V DC Release System: European key cylinder Batteries Recovery: Available (optional) BUS Synchronization: Master/Slave Kit Components BI/008 Barrier unit SP/85/AS/02 Spring 2 x BA/128/04 (4 metre boom) 2 x JNT/BA/128 joint ALED/8C LIGHTS (Comes with extended kit) BAFS/02 (Comes with extended kit) For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

ROGER TECHNOLOGY BG30 Brushless Sliding Gates Kit | 36V Motor for Super Intensive Use

Product Overview The BG30 Brushless Sliding Gates Kit features an electromechanical BRUSHLESS motor with a 36V power supply, designed for low voltage and super intensive use. This kit includes a built-in digital controller from the B70 series and a magnetic limit switch. It is ideal for sliding gates with weights ranging from 1000kg to 2200kg. Available in high-speed and reversible editions, this kit offers robust performance and reliability for both residential and commercial applications. Key Features Brushless motor Super intensive use Magnetic limit switch Available in high-speed edition (depending on chosen option) Available in reversible edition (depending on chosen option) Reversible motors lock in open/closed position when powered Product Description The BG30 Brushless Sliding Gates Kit is engineered for robust performance, featuring a 36V BRUSHLESS motor that ensures super intensive use. This motor is ideal for sliding gates with weights from 1000kg up to 2200kg, depending on the chosen option. The kit includes high-speed and reversible options, making it versatile for various applications. The built-in digital controller and magnetic limit switch provide precise control and enhance the reliability of the system. Reversible motors offer additional safety, unlocking during power cuts to allow for emergency exits. Specifications SpecificationBG30/1006/HSBG30/1406/RBG30/1506/HSBG30/1606BG30/1806/HSBG30/2206 Max gate weight (kg) 1000 1400 1500 1600 1800 2200 Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 590 540 650 390 650 470 Frequency of use Intensive use Thrust (N) 50 - 800 50 - 600 50 - 1000 50 - 1200 50 - 1250 50 - 1700 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Manoeuvre speed (m/min) 20 (0.33) 17 (0.28) 25 (0.42) 12 (0.20) 18 (0.30) 12 (0.16) Limit switch Magnetic Onboard control unit B70/1DCHP Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries recovery Optional 2 external battery 12V 4.5AH Type exit gear Z17/mod 4 Operating cycles per day (opening/closing - 24 hours no stop) 800 800 800 1000 800 1000 Maximum dimension product (L x W x H in mm) 350 x 220 x 380 What's in the Box 1x Operator with control panel (model of operator depends on chosen option) 2x SYNUS Transmitters 1x PR M90/F4ESO Photocells 1x H93/RX22A/I Plug in Radio Receiver 1x R91/ANI/P1 Aerial Additional Information For more details on the BG30 Brushless Sliding Gates Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.