ROGER TECHNOLOGY KIT MONOS4 Brushless Pair | Swing Gate Operator | Up to 4m

Product Overview The KIT MONOS4 Brushless Pair is an electromechanical operator set designed for swing gates with leaves up to 4 meters. Available in 24V or 230V, these irreversible motors feature a telescopic arm and are built for super intensive use. The 24V version includes a native encoder onboard, ensuring precise control and operation. Key Features Suitable for swing gates with leaves up to 4m Available in 24V or 230V Irreversible motor design Super intensive use capability Telescopic arm for flexible installation Integrated digital native encoder (24V version) Specifications Specifications24V230V Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V 230V AC Power rating 200W 200W Frequency of use Intensive use 30% Thrust 2200N 2400N Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP44 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 2.10 cm/s 1.66 cm/s Opening time 19-35 s 24 s Stroke 400 mm 400 mm Limit switch - - Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR - Operating cycles per day (opening/closing - 24 hours no stop) 700 - Maximum dimension product in mm (L x W x H) 1223 x 178 x 111 1223 x 178 x 111 What's in the Box 24V Version 2x Operator 1x B70/2ML/BOX 2x SYNUS/2 1x H93/RX20/I 1x R90/F4ES 1x FIFTHY/24 230V Version 2x Operator 1x H70/200AC/BOX 1x H93/RX20/I 2x T80/TX2 1x R90/F2ES 1x FIFTHY/230 Note: Actual product may differ from photo. For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY MONOS4 Brushless Motor | 24V or 230V | Up to 4m

Product Overview The MONOS4 Brushless Motor is an electromechanical operator designed for swing gates with leaves up to 4 meters in length. Available in two variants, 24V for super intensive use and 230V AC, this motor features a telescopic arm and an irreversible design, ensuring robust and reliable performance. The 24V version includes a digital native encoder onboard for precise control. Key Features Suitable for swing gates with leaves up to 4m Available in 24V or 230V variants Irreversible design for secure operation Telescopic arm for flexible installation Super intensive use capability (24V) Specifications Property24V230V Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V 230V AC Power rating 200W 200W Frequency of use Intensive use 30% Thrust 2200N 2400N Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP44 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 2.10 cm/s 1.66 cm/s Opening time 19-35 s 24 s Stroke 400 mm 400 mm Limit switch - - Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR - Operating cycles per day 700 (opening/closing - 24 hours no stop) - Maximum dimension product (L x W x H) 1223 x 178 x 111 mm 1223 x 178 x 111 mm Note: Actual product may differ from photo.

ROGER TECHNOLOGY SL/180/R - Swing Gate Motor | Up to 1.8m | Without Arms | Reversible | 36V

Product Overview The SL/180/R Swing Gate Motor is designed for intensive use, supporting swing gates with leaves up to 1.8m. This low voltage electromechanical gear motor operates on 36V and features brushless IPU technology with an integrated digital encoder. The motor is reversible, locking in the open and closed positions while the power is on, but unlocking as the power goes off, providing an emergency free exit during power cuts. The motor comes without arms, which can be purchased separately (see Accessories for arms). Key Features 36V power supply Reversible motor Suitable for swing gates with leaves up to 1.8m Brushless IPU technology Integrated digital magnetic encoder (4096 PPR) Intensive use Specifications Power line supply 230V AC 50Hz Motor power supply 36V Power rating 200W Frequency of use Intensive use Torque 150 N m Operating temperature -20 to +55°C Protection level IP44 Reductor Type Reversible Manoeuvre speed 0.6 - 6.6 Rpm Opening time 6-30 s Limit switch Mechanical stop on opening and closing only with LT341 accessory Recommended digital controllers F70/IPU36/BOX, F70/IPU36/BOX/SL Encoder Digital magnetic encoder SENSORED, 4096 PPR Batteries recovery 3 external batteries 12V DC 4.5 Amp/h (on external box) - optional Operating cycles per day 400000 (opening/closing - 24 hours no stop) Maximum dimension product (L x W x H) 492 x 102 x 144.5 mm Accessories KT250 KT218 LT340 - Arms short for articulated SLED series LT341 - Slide arm lever for articulated SLED series

ROGER TECHNOLOGY KIT R23/373 - Above Ground Swing Gate Kit | 3.5m Leaf

Product Overview The KIT R23/373 is a complete above ground swing gate solution, ideal for residential and commercial properties with swing gates that have leaves up to 3.5 meters in length. This kit includes all the necessary components for a reliable and efficient installation. Key Features Suitable for swing gates with leaves up to 3.5 meters 230V AC power supply Irreversible electromechanical motors Mechanical limit switch for precise control What's in the Box 2x R23/372 230V Motor(s) H70/200AC/BOX Control Board 2x E80/TX52R/2 Remote Controls H93 Receiver R90/F2ES Photocells Flashing Light Antenna Specifications FeatureSpecification Power Supply 230V AC - 50Hz Motor Power Supply 230V AC Power Rating 200W Frequency of Use 50% Torque 400 N m Manoeuvre Speed 1.5 Rpm Opening Time 14 s Protection Level IP43 Dimensions (L x W x H) 355 x 190 x 160 mm Product Weight 35.2 Kg Accessories Standard Accessories KT208: Plate for fixing to post R23 series KT218: Gate pull bracket for series articulated LT302: Short arms for articulated motor Applications The KIT R23/373 is perfect for a variety of settings, including residential driveways, commercial entrances, and industrial access points. Its robust design and comprehensive features ensure reliable and long-lasting performance. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

ROGER TECHNOLOGY BI/006 Series Bionik Brushless Barriers | 36V DC | Up to 6 Meters | Barrier Only

Product Overview The BI/006 Series Bionik Brushless Barriers are designed for managing booms up to 6 meters, making them ideal for high-traffic zones and parking solutions. These 36V DC barriers are built for super intensive use, offering up to 4000 operating cycles daily. The BI/006 series features two versions, including the BI/006 with a painted RAL9006 cabinet and the BI/006/IS with a brushed stainless steel AISI 304 housing unit. Variants BI/006 - Compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. BI/006/IS - Stainless steel housing, compatible with BA/90/3, BA/90/4, and BA/90/6 booms. Requires KT230 fixing plate. Key Features Intuitive operation Adaptable design Super intensive use capability Aesthetic finish High reliability and durability Battery backup available Specifications SpecificationBI/006BI/006/IS Barriers Up to 6 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 220W Frequency of Use Super intensive use Torque 10 - 300 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 4 - 8 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 4000 cycles Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 75.1 Kg 73.6 Kg Accessories Below are the accessories suitable for the BI/006 Series: KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/006 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/004 Series Bionik Brushless Barriers | 36V DC | Up to 4 Meters | Barrier Only

Product Overview The BI/004 Series Bionik Brushless Barriers are engineered for managing booms up to 4 meters, making them ideal for high-traffic zones and parking solutions. Equipped with control units and encoders, these 36V DC barriers are built for super intensive use. Note that each product variant does not include a boom, and separate models are suitable for different booms and require specific fixing plates. Variants BI/004 - Suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004/IS - Stainless steel housing, suitable for booms BA/68/3 and BA/68/4. Requires KT240 fixing plate. BI/004HP - Super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230 fixing plate. BI/004HP/IS - Brushed stainless steel AISI 304 housing unit, super intensive use, suitable for booms BA/90/3 and BA/90/4. Requires KT230/IS fixing plate. Key Features Brushless motor Super intensive use capability Rapid movement Superior construction Safety and reliability Battery backup available Specifications SpecificationBI/004BI/004/ISBI/004HPBI/004HP/IS Barriers Up to 4 mt long Power Line Supply 230V AC - 50 Hz Motor Power Supply 36V DC Electrical Absorption 0-15A max. 15A 0-15A max. 15A Power Rating 220W Frequency of Use Continuous use Continuous use Super intensive use Super intensive use Torque 0 - 200 N m 0 - 200 N m 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 Reductor Type Irreversible Opening Time at 90° 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec 1.5 - 6 sec (up to 3 m), 3 - 6 sec (up to 4 m) 3 - 6 sec Onboard Control Unit CTRL Digital Controller 36V DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Accessories Power Supply 24V DC Colour Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: plastic RAL9005; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: painted RAL9006 arabesque grey; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Cabinet: brushed stainless steel AISI 304; Head: black arabesque silver painted; Boom support: black arabesque silver painted; Boom: painted RAL9010 matt Release System STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder STANDARD Key cylinder - Optional European Cylinder (Cod. RL670) European Key cylinder Batteries Recovery Available (optional) BUS Synchronization Master/Slave Yes Operating Cycles per Day 5000 cycles 5000 cycles Accessories Below are the accessories suitable for the BI/004 Series: KT240: Fixing plate for BI/004 and BI/004/IS models KT230: Fixing plate for BI/004HP and KT230/IS for BI/004HP/IS B73/EXP: Signal status board for CTRL units SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Additional Information For more details on the BI/004 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BI/001 Series Bionik Brushless Barriers | 36V DC | Up to 3 Meters | Barrier Only

Product Overview The BI/001 Series Bionik Brushless Barriers are designed for super intensive use, capable of managing booms up to 3 meters long. Equipped with onboard digital control panels, encoders, and superior construction quality, these barriers are ideal for modern parking solutions and high-traffic zones. Note that each product variant does not come with a boom, and specific models require different booms and fixing plates. Variants BI/001PE - Suitable for elliptical boom (BA/90/3). Requires KT230 fixing plate. BI/001PC - Designed for cylindrical boom arm (BA/60/3). Requires KT230 fixing plate. Key Features Rapid movement Brushless motor Superior construction Safety first High capacity Battery backup Specifications SpecificationBI/001PEBI/001PC Barriers Up to 3 mt long Up to 3 mt long Power Line Supply 230V AC - 50Hz Motor Power Supply 36V DC Electrical Absorption max. 15A Power Rating 450W Frequency of Use Super-intensive use to Continuous use Super-intensive use to Continuous use Torque 10 - 200 N m 10 - 200 N m Operating Temperature -20 + 55°C Protection Level IP54 IP54 Reductor Type Irreversible Irreversible Opening Time at 90° 2 ÷ 4 (sec) 1 ÷ 3 (sec) Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Maximum Dimension Product (L x W x H) 380 x 270 x 1237 mm Product Weight Packed 74.7 Kg 87.6 Kg Accessories Power Supply 24V DC Operating Cycles per Day 8000 cycles 12000 cycles Standard Accessories for BI/001PE KT230: Fixing plate for various models B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PE SP/72/01: Spring for barriers BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector ALED/4C: LED strip for barrier boom BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit with magnetic support KT242: Cable passage kit for barriers CRA/BAR: Post for photocells on barrier ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Stickers pack for barriers B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC controllers, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC controllers, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Post for M90 photocells on barrier BA/91/3: Aluminum rod for barriers with LED and rubber profile JNT/BA/91: Internal boom bar joint SND/BA/91/DW: Articulated joint with lower tie rod SND/BA/91/UP: Articulated joint with upper tie rod Standard Accessories for BI/001PC KT230: Fixing plate for BI series SP/61/01: Spring for barriers B73/EXP: Signal status board for CTRL units Other Accessories for BI/001PC BT12V45: Battery DLD1/24: Single loop detector DLD2/24: Dual loop detector BA/60/3: Aluminium barrier arm BI/BAT/KIT: Emergency battery charger kit for BIONIK barriers BI/BCHP: Charger card for BIONIK barriers KT239: DIN rail kit KT242: Cable passage kit for barriers CRA/BAR: Photocell post for barriers ACS/BA/60: Break-away system for BA/60/3 boom arm R99/BASB20: Barrier stickers pack B74/BCONNECT: Wi-Fi module for remote management B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC B71/PBX/BOX: Hybrid inverter for brushless digital controllers, solar version ACS/BA/68: Break-away system for BA/68 boom arms CRA/BAR/M90: Photocell post for M90 series Additional Information For more details on the BI/001 Series Bionik Brushless Barriers or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BH23 Brushless Motor | Up to 2.8m Swing Gates | 36V

Product Overview The BH23 Brushless Motor is an electromechanical articulated motor designed for swing gates up to 2.8 meters. This 36V low voltage motor is ideal for super intensive use, featuring a native encoder onboard and an irreversible design. It includes mechanical stoppers for both opening and closing, and comes with short arms as standard. The BH23 is available in both high-speed and standard editions, making it suitable for a variety of residential and commercial applications. Key Features 36V Brushless motor Irreversible design High-speed variant available Supports swing gates with leaves up to 2.8m Mechanical stoppers in opening and closing Super intensive use Native encoder onboard Operator Options BH23/252/HS - Up to 2.5m - High Speed BH23/282 - Up to 2.8m Specifications SpecificationBH23/252/HSBH23/282 Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 36V 36V Power rating 160W 160W Frequency of use Intensive use Intensive use Torque 50 - 200 N m 50 - 280 N m Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP43 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 1.5 - 4 Rpm 1 - 1.9 Rpm Opening time 10-18 s 12-20 s Limit switch Mechanical stopper in opening and closing Mechanical stopper in opening and closing Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours no stop) 1200 1900 Product Description The BH23 Brushless Motor is a high-performance solution for swing gates, offering robust and reliable operation. The motor's irreversible design and native encoder provide precise control and enhance safety by locking the gate in place when powered. The high-speed variant (BH23/252/HS) is perfect for gates up to 2.5 meters, offering rapid operation, while the standard BH23/282 model supports gates up to 2.8 meters with increased torque for heavier gates. With a power rating of 160W and operating cycles up to 1900 per day, the BH23 Brushless Motor is designed for intensive use, making it suitable for both residential and commercial applications. The motor's mechanical stoppers ensure accurate and safe positioning of the gate in both open and closed positions. Additional Information For more details on the BH23 Brushless Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY Fixed Support Post for Bionik Boom Arms | Various Configurations

Product Overview The fixed support posts for Bionik barrier boom arms are designed to provide robust and reliable support for various boom arm configurations. Available in multiple models, these support posts cater to different installation needs, including adjustable options, bolt predisposition, and vandal-proof features. Each support post ensures stability and durability, enhancing the performance and longevity of your Bionik barrier system. Key Features Multiple configurations available Adjustable and fixed options Bolt predisposition for easy installation Vandal-proof model with magnetic suction cup and demagnetizer card Designed for compatibility with Bionik barrier boom arms Durable construction for long-lasting use Product Description The Fixed Support Posts for Bionik Boom Arms are essential components for maintaining the stability and functionality of your barrier system. These support posts are available in various configurations to meet specific installation requirements: Product Guide Product CodeDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Specifications ModelDescription BAFS/01 Fixed support for bars BAFS/02 Adjustable fixing support BAFS/03 Fixing support with bolt predisposition for bars BAFS/04 Adjustable fixing support with bolt predisposition for bars BAFS/05 Adjustable fixed support with vandal-proof magnetic suction cup, complete with B72/DGS demagnetizer card Installation and Usage Each fixed support post is designed for easy installation and compatibility with Bionik barrier boom arms. The adjustable models allow for precise alignment, while the bolt predisposition versions simplify the mounting process. The vandal-proof model (BAFS/05) includes a magnetic suction cup and a B72/DGS demagnetizer card, providing enhanced security and reliability in high-risk environments. Additional Information For more details on the fixed support posts for Bionik boom arms or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY R23 Gate Motor for Swing Gates | Up to 3.5m | Without Articulated Arms | 230V

Product Overview The R23 Gate Motor is a versatile and robust electromechanical motor designed for swing gates with leaves up to 3.5m. This 230V AC motor is irreversible and includes a mechanical limit switch for added reliability. Without articulated arms, the R23 motor ensures smooth and efficient gate operation for both residential and commercial applications. Key Features Suitable for swing gates with leaves up to 3.5m 230V AC power supply Irreversible motor Includes mechanical limit switch Product Description The R23 Gate Motor is an electromechanical articulated motor designed for swing gates. With its powerful 230V AC motor, the R23 can handle gate leaves up to 3.5m in length. The motor is designed for long-lasting performance and includes a mechanical limit switch for reliable operation. It is available in different configurations to suit various installation needs. Specifications SpecificationDetails Power line supply 230V AC - 50Hz Motor power supply 230V AC Power rating 200W Frequency of use 50% Torque 400 Nm Operating temperature -20 to +55°C Protection level IP44 Reductor Type Irreversible Manoeuvre speed 1.5 RPM Opening time 14 s Motor thermal protection 150°C Incorporated condenser 10 µF Limit switch Microswitch in opening and closing Encoder - Maximum dimension product (L x W x H in mm) 355 x 190 x 160 Product weight packed (Kg) 13.5 Number of items per pallet/box 48 Applications The R23 Gate Motor is ideal for automating swing gates in both residential and commercial settings. Its robust design and reliable performance make it suitable for a variety of environments, ensuring secure and efficient gate operation.