GENIUS AUTOMATION JA592 - Genius Brain 592 Swing Gate Panel c/w lock and limits - 230v

JA592 - Genius AUTOMATION Brain 592 Swing Gate Panel c/w lock and limits - 230v Brain 592 Brain 592 is a 230v control board for swing gates. Suitable for one or two motors - Simple or complete work times learning with or without slow-downs

GENIUS AUTOMATION Rainbow 7 kit - barrier kit with beam up to 7m length

Rainbow 7 kit - barrier kit with beam up to 7m length RAINBOW is the ideal solution for high traffic areas or where the barrier operates continuously at certain times of day, car parks, garage entrances or industrial zones RAINBOW was designed with particular attention to security and versatility of use, along with the quality of the materials on the loadbearing structure The presence of a standard encoder allows the detection of an obstacle during movement Kits are available in basic or full edition   SPECIFICATIONS Operator Rainbow 724 C Power supply voltage (Vac) 230 Vac 50Hz Electric motor voltage (Vdc) 24 Max Power at thrust (W) 480 Motor rate power (W) 220 Max torque at 24Vdc (Nm) 370 Opening/closing nominal time (sec) 4 to 11 Max Beam (m) 7 Daily max cycles 500 Operator weight (Kg) 72 Protection class IP54   KIT INCLUDES Rainbow 7 Basic Kit Rainbow 7 Full Kit  G724 3M KIT / G724 4M KIT / G724 5M KIT   RAINBOW7KIT3 / RAINBOW7KIT4 / RAINBOW7KIT5   1x Rainbow 724C  1x Rainbow 724 foundation plate  1x Rainbow 524 beam 3M/4M/5M 1x Beam extension 3.3m (not required for 5m beam) 1x beam joint (not required for 5m beam)  1x or 2x Rainbow 724 spring (2 springs Required for 6 & 7m beam)  -  1x Orion photocell -  1x Receiver RQFZ plug-in 868MHz -  2x Kilo TX2 Transmitters NOTE: Images are just for reference, for correct products contained in kits please see table above  

GENIUS AUTOMATION Rainbow 5 kit - barrier kit with beam up to 5m length

Rainbow 5 kit - barrier kit with beam up to 5m length RAINBOW is the ideal solution for high traffic areas or where the barrier operates continuously at certain times of day, car parks, garage entrances or industrial zones RAINBOW was designed with particular attention to security and versatility of use, along with the quality of the materials on the loadbearing structure The presence of a standard encoder allows the detection of an obstacle during movement Kits are available in basic or full edition   SPECIFICATIONS Operator Rainbow 524 C Power supply voltage (Vac) 230 Vac 50Hz Electric motor voltage (Vdc) 24 Max Power at thrust (W) 280 Motor rate power (W) 160 Max torque at 24Vdc (Nm) 140 Opening/closing nominal time (sec) 4 to 8 Max Beam (m) 5 Daily max cycles 1000   Operator weight (Kg) 66 Protection class IP54   KIT INCLUDES Rainbow 5 Basic Kit Rainbow 5 Full Kit  G524 3M KIT / G524 4M KIT / G524 5M KIT   RAINBOW5KIT3 / RAINBOW5KIT4 / RAINBOW5KIT5   1x Rainbow 524C  1x Rainbow 524 foundation plate  1x Rainbow 524 beam 3M/4M/5M  1x or 2x Rainbow 524 6.5 spring (2 springs Required for 5m beam)  -  1x Orion photocell -  1x Receiver RQFZ plug-in 868MHz -  2x Kilo TX2 Transmitters NOTE: Images are just for reference, for correct products contained in kits please see table above

GENIUS AUTOMATION Blizzard - 230V Kit for Sliding Gates Up to 900kg

Product Overview The Blizzard kit is designed for sliding gates with weights of up to 900 kilograms. This sleek and modern electro-mechanical operator offers a large internal space for accommodating wiring, making installation straightforward. The Blizzard features an irreversible operator with an aluminium base, magnetic encoder for full control of the motion, and magnetic limit switches. It is reliable in all weather conditions and comes with an electronic control board equipped with an intuitive setup and a large selection of operating logics and working parameters, all selectable by external programming buttons and display. The Blizzard kit is compatible with existing racks, both steel and nylon. Key Features Sleek and modern electro-mechanical operator for sliding gates. Large internal space for easy wiring accommodation. Irreversible operator with aluminium base. Magnetic encoder for full motion control and magnetic limit switches. Reliable in all weather conditions. Electronic control board with intuitive setup and a wide selection of operating logics and parameters. Compatible with existing racks (both steel and nylon). Specifications OperatorBlizzard 5Blizzard 9 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230V 230V Max weight of leaf 500kg 900kg Nominal Power (W) 360 540 Capacitor (uF) 10 12.5 Max speed (m/min) 12 Frequency of use at 20°C S3 - 40% Operating ambient temperature (°C) -20 +55 Operator weight (kg) 9.2 10 Protection class IP44 Kit Includes KitIncludes GBLIZ5KIT230V (Blizzard 5 Kit) 1x Electromechanical operator with control board 1x Blizzard foundation plate 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBLIZ9KIT230V (Blizzard 9 Kit) 1x Electromechanical operator with control board 1x Blizzard foundation plate 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the sliding gate is securely mounted and properly aligned. Install the Blizzard operator according to the installation instructions provided. Connect the power supply and configure the control board settings as needed. Perform a test run to ensure smooth and precise operation of the gate. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Blizzard operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GBLIZ5KIT230V 230V Kit for sliding gates up to 500kg GBLIZ9KIT230V 230V Kit for sliding gates up to 900kg Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Falcon - 230V Kit for Sliding Gates Up to 2000kg

Product Overview The Falcon kit is designed for sliding gates up to 2000 kilograms in weight. This electro-mechanical gear motor range is built for heavy-duty applications and is available in two versions: Falcon M14 for gates up to 1400kg and Falcon M20 for gates up to 2000kg. The compact design is sturdy, safe, and quiet, making it an ideal choice for various applications. It features a magnetic limit switch and an integrated control board with an easy-to-use programming display. Key Features Electro-mechanical gear motor for heavy sliding gates. Compact, sturdy, and quiet design. Available in two versions for different gate weights (1400kg and 2000kg). Magnetic limit switch for precise operation. Integrated control board with a user-friendly programming display. Specifications OperatorFalcon M14Falcon M20 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 230Vac Power (W) 650 800 Capacitor (uF) 16 20 Max torque (Nm) 35 45 Type of pinion gear Z16 mod 4 Z16 mod 4 Max gate weight (Kg) 1400 2000 Frequency of use at 20°C S3 - 40% S3 - 40% Operator weight (Kg) 14 15 Protection class IP44 Kit Includes KitIncludes GFALCON14KIT (Falcon 14 Kit) 1x Electromechanical operator with control board 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GFALCON20KIT (Falcon 20 Kit) 1x Electromechanical operator with control board 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the sliding gate is securely mounted and properly aligned. Install the Falcon operator according to the installation instructions provided. Connect the power supply and configure the control board settings as needed. Perform a test run to ensure smooth and precise operation of the gate. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Falcon operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GFALCON14KIT 230V Kit for sliding gates up to 1400kg GFALCON20KIT 230V Kit for sliding gates up to 2000kg Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Falcon - 230V Operator for Sliding Gates Up to 2000kg

Product Overview The Falcon operator is an electro-mechanical gear motor range designed for heavy sliding gates up to 2000 kilograms. This operator is available in two versions: Falcon M14 for gates up to 1400kg and Falcon M20 for gates up to 2000kg. The compact design is sturdy, safe, and quiet, making it an ideal choice for heavy-duty applications. It features a magnetic limit switch and an integrated control board with an easy-to-use programming display. Key Features Electro-mechanical gear motor for heavy sliding gates. Compact, sturdy, and quiet design. Available in two versions for different gate weights (1400kg and 2000kg). Magnetic limit switch for precise operation. Integrated control board with a user-friendly programming display. Specifications OperatorFalcon M14Falcon M20 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 230Vac Power (W) 650 800 Capacitor (uF) 16 20 Max torque (Nm) 35 45 Type of pinion gear Z16 mod 4 Z16 mod 4 Max gate weight (Kg) 1400 2000 Frequency of use at 20°C S3 - 40% S3 - 40% Operator weight (Kg) 14 15 Protection class IP44 Installation Instructions Ensure the sliding gate is securely mounted and properly aligned. Install the Falcon operator according to the installation instructions provided. Connect the power supply and configure the control board settings as needed. Perform a test run to ensure smooth and precise operation of the gate. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Falcon operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Falcon M14 230V operator for sliding gates up to 1400kg Falcon M20 230V operator for sliding gates up to 2000kg Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Roller Kit for Swing Gates | 3m Gates | 230V and 24V

Product Overview The Roller kit is designed for swing gates up to 3 meters in length and 500 kilograms in weight per leaf. This electro-mechanical underground gear motor is built for reliability and efficiency. It features a patented lever-operated release with a lock, which can be activated from both inside and outside the property. The standard opening angle is up to 110°, with accessory options available for 140° and 180°. Key Features Electro-mechanical underground gear motor for swing gates Patented lever-operated release with lock, accessible from inside and outside Standard opening angle of up to 110°, with options for 140° and 180° Suitable for gate leafs up to 3m and 500kg per leaf Available in 230V and 24V versions Product Description The Roller Kit for Swing Gates offers a robust and efficient solution for automating swing gates up to 3 meters in length and 500 kilograms per leaf. This kit includes an electro-mechanical underground gear motor designed for continuous use, ensuring reliable operation even in demanding environments. The patented lever-operated release with lock allows for easy access from both inside and outside the property, enhancing convenience and security. With a standard opening angle of up to 110° and optional accessories for 140° and 180° openings, this kit provides flexibility to suit various installation requirements. Available in both 230V and 24V versions, the Roller Kit caters to different power supply needs. Each kit includes essential components such as foundation boxes, manual lever releases, control boards, photocells, and transmitters, ensuring a comprehensive solution for swing gate automation. The IP67 protection class guarantees durability and resistance to harsh weather conditions, making it suitable for both residential and commercial applications. Specifications FeatureRollerRoller 24 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 380 70 Capacitor (uF) 12.5 - Max torque (Nm) 330 300 Leaf opening time at 90° (sec) 18 (110°/180°) - 10.5 (140°) 18 (110°/180°) - 10.5 (140°) Max leaf length (m) 3.5 (110°) - 3 (180°) - 2 (140°) 3.5 (110°) - 3 (180°) - 2 (140°) Indicative hourly cycles at 20°C ≥30 (110°/180°) ≥50 (140°) ≥100 (110°/180°) ≥170 (140°) Operator weight (kg) 26.5 26.5 Protection class IP67 IP67 Kit Includes KitIncludes GROLLERKIT (230V Double Kit) 2x Electromechanical operator 2x Foundation box 2x Stops 2x Manual lever release 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLERKITS (230V Single Kit) 1x Electromechanical operator 1x Foundation box 1x Stops 1x Manual lever release 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLER24KIT (24V Double Kit) 2x Electromechanical operator 2x Foundation box 2x Stops 2x Manual lever release 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLER24KITS (24V Single Kit) 1x Electromechanical operator 1x Foundation box 1x Stops 1x Manual lever release 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Roller kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Roller kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GROLLERKIT 230V Double Kit GROLLERKITS 230V Single Kit GROLLER24KIT 24V Double Kit GROLLER24KITS 24V Single Kit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Roller - Underground Operator for Swing Gates Up to 3m and 500kg

Product Overview The Roller underground operator is designed for swing gates up to 3 meters in length and 500 kilograms in weight per leaf. This electro-mechanical underground gear motor is built for reliability and efficiency. It features a patented lever-operated release with a lock, which can be activated from both inside and outside the property. The standard opening angle is up to 110°, with accessory options available for 140° and 180°. Key Features Electro-mechanical underground gear motor for swing gates. Patented lever-operated release with lock, accessible from inside and outside. Standard opening angle of up to 110°, with options for 140° and 180°. Suitable for gate leafs up to 3m and 500kg per leaf. Available in 230V and 24V versions. Specifications OperatorRollerRoller 24 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 380 70 Capacitor (uF) 12.5 - Max torque (Nm) 330 300 Leaf opening time at 90° (sec) 18 (110°/180°) - 10.5 (140°) 18 (110°/180°) - 10.5 (140°) Max leaf length (m) 3.5 (110°) - 3 (180°) - 2 (140°) 3.5 (110°) - 3 (180°) - 2 (140°) Indicative hourly cycles at 20°C ≥30 (110°/180°) ≥50 (140°) ≥100 (110°/180°) ≥170 (140°) Operator weight (kg) 26.5 Protection class IP67 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Roller underground operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Roller underground operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Roller 230V underground operator for swing gates up to 3m Roller 24 24V underground operator for swing gates up to 3m Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Euro Bat Operator for Swing Gates Up to 4m

Product Overview The Genius Euro Bat operator is designed for swing gates up to 4 meters in length. This sturdy electro-mechanical operator features a robust design, accommodating both right and left hand openings. The axial thrust mechanism allows for the opening of gate leaves up to 4 meters, making it a reliable choice for residential and commercial gate automation. The Euro Bat operator is available in both 230V and 24V versions, with the 24V model featuring a virtual encoder and optional battery backup for uninterrupted operation during power outages. Key Features Durable Construction: Sturdy electro-mechanical operator for long-lasting performance. Versatile Installation: Suitable for both right and left hand openings. Axial Thrust: Supports gate leaves up to 4m in length. Voltage Options: Available in 230V and 24V models. Battery Backup: 24V versions can include a battery backup for power failure situations. Specifications OperatorEuro Bat 300Euro Bat 400Euro Bat 324Euro Bat 424 Power supply voltage (Vac) 230Vac 230Vac 230Vac 230Vac Electric motor voltage 230Vac 230Vac 24Vdc 24Vdc Power (W) 280 280 70 70 Capacitor (uF) 8 8 - - Thrust (daN) 350 350 300 300 Max. leaf length (m) 3 4 3 4 Cycles per hour 20 20 50 50 Operator weight (kg) 6.5 Protection class IP44 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Euro Bat operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Euro Bat operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Euro Bat 300 230V operator for swing gates up to 3m Euro Bat 400 230V operator for swing gates up to 4m Euro Bat 324 24V operator for swing gates up to 3m Euro Bat 424 24V operator for swing gates up to 4m Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Euro Bat Kit for Swing Gates Up to 4m

Product Overview The Genius Euro Bat kit is designed for swing gates up to 4 meters in length. This sturdy electro-mechanical operator is available in both 230V and 24V versions, with the 24V model featuring a virtual encoder and optional battery backup for uninterrupted operation during power outages. The Euro Bat kit is versatile, accommodating both right and left hand openings, and can be installed close to the hinge with minimal building work. The axial thrust design allows for the opening of gate leaves up to 4 meters, making it a reliable choice for residential and commercial gate automation. Key Features Durable Construction: Sturdy electro-mechanical operator. Versatile Installation: Suitable for both right and left hand openings, close to the hinge. Axial Thrust: Supports gate leaves up to 4m in length. Voltage Options: Available in 230V and 24V models. Battery Backup: 24V versions can include a battery backup for power failure situations. Specifications OperatorEuro Bat 300Euro Bat 400Euro Bat 324Euro Bat 424 Power supply voltage (Vac) 230Vac 230Vac 230Vac 230Vac Electric motor voltage 230Vac 230Vac 24Vdc 24Vdc Power (W) 280 280 70 70 Capacitor (uF) 8 8 - - Thrust (daN) 350 350 300 300 Max. leaf length (m) 3 4 3 4 Cycles per hour 20 20 50 50 Operator weight (kg) 6.5 Protection class IP44 Kit Includes KitIncludes EBAT300KIT (230V 3m Double Kit) 2x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT300KITS (230V 3m Single Kit - Right or Left hand) 1x Electromechanical operator - Right or left hand 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT400KIT (230V 4m Double Kit) 2x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT400KITS (230V 4m Single Kit - Right or Left hand) 1x Electromechanical operator - Right or left hand 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT324KIT (24V 3m Double Kit) 2x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT324KITS (24V 3m Single Kit - Right hand) 1x Electromechanical operator - Right hand 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT424KIT (24V 4m Double Kit) 2x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 EBAT424KITS (24V 4m Single Kit - Right hand) 1x Electromechanical operator - Right hand 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Euro Bat kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Euro Bat kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription EBAT300KIT 230V 3m Double Kit EBAT300KITS 230V 3m Single Kit - Right or Left hand EBAT400KIT 230V 4m Double Kit EBAT400KITS 230V 4m Single Kit - Right or Left hand EBAT324KIT 24V 3m Double Kit EBAT324KITS 24V 3m Single Kit - Right hand EBAT424KIT 24V 4m Double Kit EBAT424KITS 24V 4m Single Kit - Right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius G-Bat Kit for Swing Gates Up to 3m

Product Overview The Genius G-Bat kit is designed for swing gates up to 3 meters in length. This robust mechanism features a bronze crown and steel screw, ensuring durability and long life for the motor. The G-Bat kit is versatile, accommodating both right and left hand openings, and can be installed close to the hinge with minimal building work. The axial thrust design allows for the opening of gate leaves up to 4 meters. It is available in 230V and 24V versions, with the 24V model featuring a virtual encoder and optional battery backup for uninterrupted operation during power outages. Key Features Durable Construction: Sturdy mechanism with bronze crown and steel screw. Versatile Installation: Suitable for both right and left hand openings, close to the hinge. Axial Thrust: Supports gate leaves up to 4m in length. Voltage Options: Available in 230V and 24V models. Battery Backup: 24V versions can include a battery backup for power failure situations. Specifications OperatorG-Bat 300G-Bat 324 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 280 70 Capacitor (uF) 8 - Thrust (daN) 350 300 Max. leaf length (m) 3 3 Frequency of use at 20°C ≥30% ≥100% Operator weight (kg) 6.5 Protection class IP54 Kit Includes KitIncludes GBAT300KIT (230V Double Kit) 2x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBAT300KITSR (230V Single Kit - Right hand) 1x Electromechanical operator - Right hand 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBAT300KITSL (230V Single Kit - Left hand) 1x Electromechanical operator - Left hand 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBAT324KIT (24V Double Kit) 2x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBAT324KITSR (24V Single Kit - Right hand) 1x Electromechanical operator - Right hand 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GBAT324KITSL (24V Single Kit - Left hand) 1x Electromechanical operator - Left hand 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius G-Bat kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius G-Bat kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GBAT300KIT 230V Double Kit GBAT300KITSR 230V Single Kit - Right hand GBAT300KITSL 230V Single Kit - Left hand GBAT324KIT 24V Double Kit GBAT324KITSR 24V Single Kit - Right hand GBAT324KITSL 24V Single Kit - Left hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius G-Bat Operator for Swing Gates Up to 3m (230V and 24V)

Product Overview The Genius G-Bat operator is engineered for swing gates up to 3 meters. It features a robust mechanism with a bronze crown and steel screw, ensuring durability and long life for the motor. The G-Bat is versatile, accommodating both right and left hand openings, and can be installed close to the hinge with minimal building work. The axial thrust design allows for the opening of gate leaves up to 4 meters. It is available in 230V and 24V versions, with the 24V model featuring a virtual encoder and optional battery backup for uninterrupted operation during power outages. Key Features Durable Construction: Sturdy mechanism with bronze crown and steel screw. Versatile Installation: Suitable for both right and left hand openings, close to the hinge. Axial Thrust: Supports gate leaves up to 4m in length. Voltage Options: Available in 230V and 24V models. Battery Backup: 24V versions can include a battery backup for power failure situations. Specifications OperatorG-Bat 300G-Bat 324 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 280 70 Capacitor (uF) 8 - Thrust (daN) 350 300 Max. leaf length (m) 3 3 Frequency of use at 20°C ≥30% ≥100% Operator weight (kg) 6.5 Protection class IP54 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius G-Bat operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius G-Bat operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription G-Bat 300 230V operator for swing gates up to 3m G-Bat 324 24V operator for swing gates up to 3m Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Sirocco Operator for Residential Swing Gates Up to 2.5m with Limit Switch

Product Overview The Genius Sirocco operator is designed for residential swing gates up to 2.5 meters in length. This electro-mechanical operator features an easy installation process and is available in both 230V and 24V versions. The Sirocco operator includes mechanical stops for both opening and closing, eliminating the need for physical stops. The built-in limit switches ensure precise control, making the Sirocco operator a reliable choice for residential gates. Key Features Electro-mechanical operator for residential swing gates Available in 230V and 24V versions Integrated mechanical stops for both opening and closing Built-in limit switches for precise control Easy installation without the need for physical stops Suitable for gates up to 2.5 meters 24V versions for increased use frequency Product Description The Genius Sirocco operator is a versatile and efficient solution for automating residential swing gates up to 2.5 meters in length. The electro-mechanical design ensures smooth and reliable operation, while the integrated mechanical stops for both opening and closing make installation straightforward and hassle-free. The Sirocco operator is available in 230V and 24V versions, providing options to suit different power requirements and usage frequencies. The built-in limit switches enhance control and safety, ensuring precise operation of the gate. The 24V versions are particularly suited for higher frequency use, making them ideal for residential settings. The operator is robust and designed for long-lasting performance, providing a reliable solution for gate automation. Specifications OperatorSirocco 250Sirocco 2524 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Nominal power (W) 250 70 Current (A) 1.1 3 Thermal Protection °C 140 - Thrust capacitor (uF) 6.3 - Thrust (daN) 200 250 Travel (mm) 350 (300mm without mechanical stops) Max speed (cm/sec) 1.6 Frequency of use at 20°C S3 - 30% Continuous Operating ambient temperature °C -20 +55 Operator weight (kg) 6.5 Protection class IP54 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Sirocco operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Sirocco operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Sirocco 250 LS 230V operator with limit switch Sirocco 2524 LS 24V operator with limit switch Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Sirocco Kit for Residential Swing Gates Up to 2.5m

Product Overview The Genius Sirocco kit is designed for residential swing gates up to 2.5 meters in length. This electromechanical operator allows for easy installation and is available in both single and double kit options. The Sirocco kit features versions with 230V and 24V power supplies, catering to different requirements. The integrated mechanical stops for both opening and closing eliminate the need for physical stops, simplifying the installation process. The 24V versions are ideal for increased usage frequency, ensuring reliable operation for residential gates. Key Features Electromechanical operator for residential swing gates Available in 230V and 24V versions Single and double kit options Integrated mechanical stops for both opening and closing Easy installation without the need for physical stops Suitable for gates up to 2.5 meters 24V versions for increased use frequency Product Description The Genius Sirocco kit offers a versatile and efficient solution for automating residential swing gates up to 2.5 meters in length. The electromechanical design ensures smooth and reliable operation, while the integrated mechanical stops for both opening and closing make installation straightforward and hassle-free. The Sirocco kit is available in 230V and 24V versions, providing options to suit different power requirements and usage frequencies. With options for both single and double kits, the Sirocco range can cater to a variety of installation needs. The 24V versions are particularly suited for higher frequency use, making them ideal for residential settings. The kit includes all necessary components for installation and operation, ensuring a complete and convenient solution for gate automation. Specifications OperatorSirocco 250Sirocco 2524 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Nominal power (W) 250 70 Current (A) 1.1 3 Thermal Protection °C 140 - Thrust capacitor (uF) 6.3 - Thrust (daN) 200 250 Travel (mm) 350 (300mm without mechanical stops) Max speed (cm/sec) 1.6 Frequency of use at 20°C S3 - 30% Continuous Operating ambient temperature °C -20 +55 Operator weight (kg) 6.5 Protection class IP54 Kit Includes KitContains GSIR250LSKIT (230V Double Kit) 2x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GSIR250LSKITS (230V Single Kit) 1x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GSIR24LSKIT (24V Double Kit) 2x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GSIR24LSKITS (24V Single Kit) 1x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Sirocco kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Sirocco kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GSIR250LSKIT 230V Double Kit GSIR250LSKITS 230V Single Kit GSIR24LSKIT 24V Double Kit GSIR24LSKITS 24V Single Kit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Mistral Kit for Swing Gates Up to 4m

Product Overview The Genius Mistral kit is designed for swing gates up to 4 meters in length. This electromechanical operator with in-line axis thrust is available in both single and double kit options, catering to a variety of requirements. The Mistral kit includes electric limit switches for both opening and closing, ensuring secure operation by managing slowdown. With models offering 300mm and 400mm rod travel, the Mistral range is suitable for gates up to 4 meters wide. Key Features Electromechanical operator with in-line axis thrust Available in single and double kit versions Electric limit switches for secure opening and closing 300mm and 400mm rod travel versions available Suitable for gates up to 4 meters wide Product Description The Genius Mistral kit is a comprehensive solution for automating swing gates up to 4 meters in length. It features an electromechanical design with in-line axis thrust, ensuring smooth and efficient operation. The built-in electric limit switches provide secure and precise control of the gate, managing both opening and closing phases to prevent damage and enhance safety. The Mistral kit is available in several versions, including the Mistral 300LS and Mistral 400LS for 230V applications, and the Mistral 324LS and Mistral 424LS for 24V applications. These models offer different rod travel lengths, making them suitable for gates of various sizes up to 4 meters wide. The kit options include single and double configurations to meet different installation needs. Specifications OperatorMistral 300LSMistral 400LSMistral 324LSMistral 424LS Power supply voltage (Vac) 230 Vac 230 Vac 230 Vac 230 Vac Electric motor voltage 230 Vac 230 Vac 24 Vdc 24 Vdc Power (W) 300 300 70 70 Capacitor (uF) 8 8 - - Thrust (daN) 300 300 280 280 Max leaf length (m) 3* 4** 3* 4** Frequency of use at 20°C >30% >25% >100% >75% Operator weight (Kg) 7.8 8 7.8 8 Protection class IP54 Kit Contains KitContains DOUBLE 300 LS KIT 2x 300 LS operator 1x Brain 592 control board + Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 SINGLE 300 LS KIT 1x 300 LS operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 DOUBLE 400 LS KIT 2x 400 LS operator 1x Brain 592 control board + Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 SINGLE 400 LS KIT 1x 400 LS operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 DOUBLE 324 LS KIT 2x 324 LS operator 1x Brain 592 control board + Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 SINGLE 324 LS KIT 1x 324 LS operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 DOUBLE 424 LS KIT 2x 424 LS operator 1x Brain 592 control board + Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 SINGLE 424 LS KIT 1x 424 LS operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Mistral kit according

GENIUS AUTOMATION Genius Mistral Operator for Swing Gates Up to 4m with Limit Switches

Product Overview The Genius Mistral operator is an electromechanical solution for swing gates up to 4 meters in length. Designed with in-line axis thrust, this operator is available in various versions to suit different requirements. It features electric limit switches for both opening and closing, ensuring secure operation by managing slowdown. The Mistral range includes models with 300mm and 400mm rod travel versions, catering to gates up to 4 meters wide. Key Features Electromechanical operator with in-line axis thrust Available in 230V and 24V versions Electric limit switches for secure opening and closing 300mm and 400mm rod travel versions available Suitable for gates up to 4 meters wide Product Description The Genius Mistral operator is a versatile and reliable choice for automating swing gates up to 4 meters in length. With its electromechanical design and in-line axis thrust, it provides smooth and efficient operation. The built-in electric limit switches ensure secure and precise control of the gate, managing both opening and closing phases to prevent damage and enhance safety. The Mistral operator is available in several versions to meet different power requirements and usage frequencies. The models include Mistral 300LS and Mistral 400LS for 230V applications, and Mistral 324LS and Mistral 424LS for 24V applications. These models offer different rod travel lengths, making them suitable for gates of various sizes up to 4 meters wide. Specifications SpecificationMistral 300LSMistral 400LSMistral 324LSMistral 424LS Power supply voltage (Vac) 230 Vac 230 Vac 230 Vac 230 Vac Electric motor voltage 230 Vac 230 Vac 24 Vdc 24 Vdc Power (W) 300 300 70 70 Capacitor (uF) 8 8 - - Thrust (daN) 300 300 280 280 Max leaf length (m) 3* 4** 3* 4** Frequency of use at 20°C >30% >25% >100% >75% Operator weight (Kg) 7.8 8 7.8 8 Protection class IP54 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Mistral operator according to the installation instructions provided. For gates over 2.5 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Mistral operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Mistral 300LS Electromechanical operator with 300mm rod travel, 230V Mistral 324LS Electromechanical operator with 300mm rod travel, 24V Mistral 400LS Electromechanical operator with 400mm rod travel, 230V Mistral 424LS Electromechanical operator with 400mm rod travel, 24V Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Compas 24V Kit for Residential Swing Gates Up to 2.5m

Product Overview The Genius Compas 24V kit is designed for residential swing gates up to 2.5 meters in length. Ideal for applications on narrow gate piers, this kit is available in single (GCOMPASKITS) and double (GCOMPASKIT) versions. The Compas 24C features an integrated control board, while the standard Compas 24 serves as the slave unit. Built-in mechanical stops make the installation process straightforward and efficient. This kit is suitable for gates up to 2.5 meters with leaf locking and up to 2 meters without an electric lock. Key Features 24V operator for residential swing gates Available in single and double kit versions Integrated control board in the master unit Built-in mechanical stops for easy installation Suitable for gates up to 2.5 meters with leaf locking, up to 2 meters without an electric lock Ideal for narrow gate piers Product Description The Genius Compas 24V kit for residential swing gates offers a versatile and reliable solution for automating gates up to 2.5 meters in length. Designed for narrow gate piers, this kit includes both master and slave units, or just the master unit for single gate applications. The COMPAS 24C master unit features an integrated control board, simplifying the installation process. Built-in mechanical stops further ease the setup, ensuring a precise and efficient installation. This kit is suitable for gates up to 2.5 meters with leaf locking and up to 2 meters without the need for an electric lock, making it a cost-effective and secure solution for residential gates. The electromechanical operators provide smooth and reliable operation, with robust construction for long-lasting performance. Specifications SpecificationCOMPAS 24CCOMPAS 24 Power supply voltage (Vac) 230 230 Power (W) 24 24 Capacitor (uF) 140 120 Max torque (Nm) 250 Leaf opening time at 90° (sec) 13 Max leaf length (m) 2.5 Max leaf weight (kg) 310 Max continuous cycles 30 Operator weight (kg) 8.7 7 Protection class IP44 Kit Includes KitIncludes GCOMPASKIT (Double Kit) 1x Electromechanical operator with control board 1x Electromechanical operator slave unit 1x Pair of vega bus photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GCOMPASKITS (Single Kit) 1x Electromechanical operator with control board 1x Pair of vega bus photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Compas 24V kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Compas 24V kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GCOMPASKIT 24V Double kit GCOMPASKITS 24V Single kit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Compas 24V Operator for Residential Swing Gates Up to 2.5m

Product Overview The Genius Compas 24V operator is designed for residential swing gates up to 2.5 meters in length. Ideal for applications on narrow gate piers, this operator is available in master (COMPAS 24C) and slave (COMPAS 24) versions. The Compas 24C features an integrated control board, while the Compas 24 acts as the slave unit. Built-in mechanical stops make the installation process straightforward and efficient. This operator is suitable for gates up to 2.5 meters with leaf locking and up to 2 meters without an electric lock. Key Features 24V operator for residential swing gates Available in master (COMPAS 24C) and slave (COMPAS 24) versions Integrated control board in the master unit Built-in mechanical stops for easy installation Suitable for gates up to 2.5 meters with leaf locking, up to 2 meters without an electric lock Ideal for narrow gate piers Product Description The Genius Compas 24V operator is a versatile and reliable solution for automating residential swing gates. This operator is specifically designed for narrow gate piers and is available in both master and slave configurations. The COMPAS 24C master unit features an integrated control board, simplifying the installation process. The built-in mechanical stops further ease the setup, ensuring a precise and efficient installation. With a maximum gate leaf length of 2.5 meters, the Compas operator provides secure leaf locking. For gates up to 2 meters, no electric lock is needed, making it a cost-effective solution. The operator is robust and durable, offering smooth and reliable operation for residential gates. Specifications SpecificationCOMPAS 24CCOMPAS 24 Power supply voltage (Vac) 230 230 Power (W) 24 24 Capacitor (uF) 140 120 Max torque (Nm) 250 Leaf opening time at 90° (sec) 13 Max leaf length (m) 2.5 Max leaf weight (kg) 310 Max continuous cycles 30 Operator weight (kg) 8.7 7 Protection class IP44 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Compas 24V operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Compas 24V operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription COMPAS 24C Master unit with integrated control board COMPAS 24 Slave unit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Genius Trigon Kit for Swing Gates Up to 3m

Product Overview The Genius Trigon kit for swing gates is a reliable and efficient solution for automating gates up to 3 meters in length. Available in both 230V and 24V versions, and in double or single kit options, this kit offers a simple and fast installation process, often requiring no modifications to the existing load-bearing structure. Suitable for a variety of applications, the Trigon kit provides reliable operation with leaf locking for gates up to 3 meters and non-locking for gates up to 2 meters without an electric lock. Key Features Available in 230V and 24V versions Double or single kit options Simple and fast installation Cost-effective, often no modifications needed Suitable for gates up to 3 meters with leaf locking, up to 2 meters without an electric lock Product Description The Genius Trigon kit for swing gates is designed for easy installation and reliable operation. It is available in two power supply versions, 230V and 24V, and can be configured as either a double or single kit, making it a versatile choice for various gate automation needs. The kit is suitable for gates up to 3 meters in length, with leaf locking, and up to 2 meters without the need for an electric lock. This articulated operator offers a cost-effective solution by often eliminating the need for modifications to the existing gate structure. The Trigon kit includes all necessary components for installation and operation, ensuring a straightforward setup process. The electromechanical operators are robust and designed for long-lasting performance, providing smooth and efficient gate movement. Specifications SpecificationTrigon 02Trigon 02 -24 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 280 40 Capacitor (uF) 8 - Max torque (Nm) 250 200 Leaf opening time at 90° (sec) 18 18 Max leaf length (m) 3 3 Indicative hourly cycles at 20°C >30% >100% Operator weight (Kg) 11.5 11.5 Protection class IP44 IP44 Kit Includes KitIncludes GTRIGONKIT 2x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GTRIGONKITS 1x Electromechanical operator 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GTRIGON24KIT 2x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GTRIGON24KITS 1x Electromechanical operator 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Genius Trigon kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Genius Trigon kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GTRIGONKIT 230V Double kit GTRIGONKITS 230V Single kit GTRIGON24KIT 24V Double kit GTRIGON24KITS 24V Single kit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Trigon - Articulated Operator for Swing Gates Up to 3m

Product Overview The Trigon articulated operator is designed for swing gates up to 3 meters in length. Available in both 230V and 24V versions, this operator offers a simple and fast installation process, making it a cost-effective choice as it often requires no modifications to the existing load-bearing structure. Suitable for various applications, it provides reliable operation with leaf locking for gates up to 3 meters and non-locking for gates up to 2 meters without an electric lock. The Trigon operator is available in both double and single kit options. Key Features Available in 230V and 24V versions Simple and fast installation Cost-effective, often no modifications needed Suitable for gates up to 3 meters with leaf locking, up to 2 meters without an electric lock Available in double or single kit Product Description The Trigon articulated operator is an efficient solution for automating swing gates up to 3 meters in length. It is available in two versions, 230V and 24V, catering to different power requirements. The operator is designed for easy and quick installation, often eliminating the need for modifications to the existing gate structure, making it a cost-effective choice for many applications. This operator is suitable for gates up to 3 meters with leaf locking, and up to 2 meters without the need for an electric lock. It can handle a variety of residential and commercial gate automation needs. The Trigon articulated operator is available in both double and single kit configurations to suit different installation requirements. Specifications SpecificationTrigon 02Trigon 02 -24 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 280 40 Capacitor (uF) 8 - Max torque (Nm) 250 200 Leaf opening time at 90° (sec) 18 18 Max leaf length (m) 3 3 Indicative hourly cycles at 20°C >30% >100% Operator weight (Kg) 11.5 11.5 Protection class IP44 IP44 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Trigon articulated operator according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Trigon articulated operator: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription Trigon 02 Articulated operator for swing gates - 230V version Trigon 02 -24 Articulated operator for swing gates - 24V version Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GENIUS AUTOMATION Brain 17 230V Electronic Control Board | Advanced Automation Control

Product Overview The Brain 17 230V electronic control board is the pinnacle of technological evolution, designed to meet every parameter for professional automated systems. This advanced control board delivers top performance and, when combined with the PROCoder absolute magnetic encoder, ensures complete control over automation movement and facilitates reverse on obstacle detection. Key Features Advanced 230V electronic control board High-tech automation control Compatible with PROCoder magnetic encoder Ensures complete control of automation movement Facilitates reverse on obstacle detection Designed for professional automated systems Top performance and reliability Product Description The Brain 17 is an advanced 230V electronic control board that represents the highest level of technology evolution in the field of automated systems. Designed to meet every possible parameter, the Brain 17 control board offers top-tier performance, making it an ideal choice for building highly professional and reliable automated systems. Advanced Technology The Brain 17 control board is engineered to deliver superior performance, ensuring that automated systems operate with precision and efficiency. Its advanced technology allows it to handle a wide range of automation tasks, providing flexibility and adaptability in various applications. Complete Control with PROCoder When combined with the absolute magnetic encoder PROCoder, the Brain 17 control board offers complete control over automation movement. This combination ensures accurate positioning and smooth operation, enhancing the overall performance of the automated system. Additionally, the system facilitates reverse on obstacle detection, providing an extra layer of safety and reliability. Professional Performance Designed for professional use, the Brain 17 control board is built to meet the demands of high-performance automated systems. Its robust construction and advanced features make it suitable for a wide range of applications, ensuring long-term reliability and top performance. Specifications Power Supply: 230V Compatible with PROCoder absolute magnetic encoder Facilitates reverse on obstacle detection Designed for professional automated systems Top performance and reliability Package Contents Brain 17 230V Electronic Control Board Mounting hardware Instructions Applications The Brain 17 control board is ideal for use in a wide range of professional automated systems, including gates, doors, and other automation applications. Its advanced technology and compatibility with the PROCoder magnetic encoder make it a valuable addition to any high-performance automation setup, ensuring precise control and reliable operation.

GENIUS AUTOMATION Brain 18 - 24v control panel 6100314

Brain 18 Brain 18 24v control board.