GATEMASTER SBD Select Pro Bolt-on Deadlock - No Handle - Fits Up to 60mm Gate Frame

Product Overview The SBD Select Pro bolt-on deadlock is a convenient and robust locking solution for various applications. Designed to eliminate the need for padlocks or slide bolts, this deadlock secures gates with a simple turn of the key, extending the stainless steel deadbolt 30mm. It is perfect for heavy use gates in communal areas, schools, and alleys. Key Features Keyed access on both sides. Compatible with both left-hand and right-hand gates. Adjustable deadbolt (up to 27mm) for precise fitting on site. One-piece machined stainless steel locking bolt. Easy installation with only three holes required in the gate frame. 5 pin eurocylinder for enhanced security. Supplied with a bolt support plate featuring a brass bearing to reduce friction and wear, increasing product life. Designed for heavy use gates. 30mm bolt throw for added security. Square case design easily incorporates into various gate designs. Marine grade, salt spray tested for 1000 hours. Product Details Product CodeDescription SBD1601 To fit 10-30mm (1/2" - 1-1/4") gate frames SBD1602 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Deadbolt: Adjustable, moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using the stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill a clearance hole in the keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit the strike plate by either welding or screw fixing it to the gate post. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER SBLD Select Pro Bolt-on latch and deadbolt - fits up to 60mm gate frame (modern or traditional handle)

Product Overview The SBLD Select Pro bolt-on latch and deadbolt is designed for gates that require both latching and deadlocking for enhanced security. Its stainless steel latchbolt springs 13mm into the gate post and retracts using the handles, while turning the key moves the bolt 30mm, deadlocking it for added security. This lock is easily adaptable for left or right-hand gates and comes with a bolt support plate and gate post strike plate. Available with modern or traditional handle options. Key Features Keyed access on both sides for added security. Adjustable latchbolt length for precise fitting on site. Stainless steel locking bolt with a 30mm throw. Easy to fit with just three holes to drill in the gate. 5 pin eurocylinder for reliable locking. Square shape design fits various gate styles. Marine grade, salt spray tested for 1000 hours. Designed for heavy use gates. Comes with a set of three keys, with easy replacement options available. Product Details Product codeDescription SBLD1601AH To fit 10-30mm (1/2" - 1-1/4") gate frames - modern handle SBLD1602AH To fit 40-60mm (1-1/2" - 2-1/4") gate frames - modern handle SBLD1601THD To fit 10-30mm (1/2" - 1-1/4") gate frames - traditional handle SBLD1602THD To fit 40-60mm (1-1/2" - 2-1/4") gate frames - traditional handle Specifications Marine grade: Salt spray tested for 1000 hours. Bolts: Adjustable, latchbolt springs 13mm (1/2") and deadbolt moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit strike plate by either welding or screw fixing it to the gate post. Ensure latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle lock and spray the mechanism inside with light oil. Video Click to watch the installation video

Gatemaster BD Superlock Deadlock | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BD Superlock deadlock provides maximum security with a simple, single 15mm locking action. Designed for ease of installation, this deadlock features a slim 70mm wide lock case and an adjustable, removable deadbolt to fit most gate designs. Made from stainless steel, the BD Superlock deadlock ensures durability and long-lasting performance for outdoor gates. Key Features Single 15mm locking action for maximum security Slim 70mm wide lock case Made from stainless steel for outdoor durability Adjustable and removable deadbolt for easy fitting Suitable for left and right handed gates Supplied with bolt support plate Product Description The Gatemaster BD Superlock deadlock offers a robust and reliable locking solution for gate frames up to 60mm. Its simple deadlock action ensures the gate remains open until the key is turned, providing both security and convenience. The slim design and adjustable deadbolt make it easy to fit on most gate frames, ensuring a secure and durable lock. Constructed from stainless steel, the BD Superlock deadlock is built to withstand outdoor conditions, offering long-term durability and reliability. The deadbolt moves 15mm into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt support plate, ensuring a straightforward installation process. This lock is non-handed, making it suitable for both left and right hand gates. It comes in two models to fit different gate frame sizes: BD1030: Fits flat bar and up to 30mm (1 1/4") box section BD4060: Fits 40 to 60mm (1 1/2" to 2 1/4") box section Installation Instructions Drill 2 x 9mm holes at 140mm centres for fixing bolts provided. Drill a second 18mm clearance hole for the deadbolt at 60mm centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the deadbolt through the bottom 18mm hole. Lock the deadbolt with the hex key supplied by inserting the hex key into the end of the deadbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the deadbolt moves freely. Maintenance Every 6 months: Lubricate the deadbolt with light oil. Annually, dismantle the lock and spray the mechanism with light oil. Product Details Product CodeDescription BD1030 Fits flat bar and up to 30mm (1 1/4") box section BD4060 Fits 40 to 60mm (1 1/2" to 2 1/4") box section Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GATEMASTER APS Hydraulic Gate Closer & Hinge Kit | Safe & Reliable Self-Closing Gates

Product Overview The APS Hydraulic Gate Closer & Hinge Kit is designed to provide safe and reliable gate closing using proven hydraulic technology. This kit is ideal for gates that need to be self-closing, ensuring security and convenience without the need for power. The kit comes with either a standard wrap-around hinge (APS) or a stop hinge (APSSTOP) that prevents the gate from opening more than 100°. Key Features Hydraulic gate closer and top hinge kit for self-closing gates Suitable for gates up to 150kg No power required Fully adjustable ROSPA compliant closing speed with closing and latching speed adjustments Robust closer unit fitted underneath the gate, acts as a load-bearing lower hinge Unobtrusive and highly vandal-resistant design Includes a top hinge assembly that is fully adjustable for correct gate positioning Product Description The APS Hydraulic Gate Closer & Hinge Kit is an advanced solution for gates requiring reliable and safe self-closing functionality. The hydraulic closer and hinge kit is suitable for gates weighing up to 150kg and does not require any power source, making it an efficient and eco-friendly choice. The closer unit, fitted underneath the gate, also serves as a load-bearing lower hinge, ensuring robustness and stability. The kit includes fully adjustable closing and latching speed settings, compliant with ROSPA standards, to provide controlled and safe gate operation. The hydraulic gate closer is unobtrusive and highly resistant to vandalism, ensuring long-lasting durability and security. Additionally, the top hinge assembly is fully adjustable, allowing for precise gate positioning after installation. The APS kit comes in two versions: APS: Hydraulic gate closer with standard wrap-around hinge APSSTOP: Kit with a special stop hinge to prevent the gate from opening more than 100°, protecting the closer from damage Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Attach the hydraulic gate closer unit underneath the gate, ensuring it acts as the load-bearing lower hinge. Install the top hinge assembly, adjusting as necessary to position the gate correctly. Adjust the closing and latching speed settings to ensure safe and controlled gate operation. Maintenance Regular maintenance will ensure the longevity and proper functioning of the APS Hydraulic Gate Closer & Hinge Kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the closer and hinges for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription APS Hydraulic gate closer with standard wrap-around hinge APSSTOP Kit with special stop hinge to prevent gate from opening more than 100°, protecting the closer from damage Dimensions Specific dimensions are available upon request or from the product specifications sheet. For more information, refer to the specification sheet available for download.

Gatemaster BQ Superlock Bolt-On Quick Exit No Outside Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQ Superlock bolt-on quick exit no outside access lock is designed for gates that are used solely for exiting a property. Featuring a green push pad for quick exit from the inside, this lock provides a secure and unobtrusive locking mechanism. Made from stainless steel, the BQ NA Superlock ensures ultimate outdoor durability and long-lasting performance. It is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit No access from outside, push pad on inside Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQ Superlock bolt-on quick exit no outside access lock is an ideal solution for gates that only require exit functionality. The green push pad on the inside facilitates rapid exit, while the lack of external access ensures security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQ NA Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQ1030LNA: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQ4060LNA: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQ1030RNA: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQ4060RNA: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQ1030LNA Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQ4060LNA Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQ1030RNA Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQ4060RNA Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BQDG Superlock Bolt-On Quick Exit Digital Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQDG Superlock bolt-on quick exit digital access lock is designed for communal areas where easy and rapid exit is needed. This lock features keyless entry via a digital keypad and a highly visible push pad for quick exit from the inside. Constructed from stainless steel, the BQDG Superlock ensures ultimate outdoor durability and long-lasting performance. It is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit Digital keypad access on one side, push pad on the other Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQDG Superlock bolt-on quick exit digital access lock offers a secure and durable locking solution for communal gates. Featuring keyless entry via a digital keypad on one side and a green push pad on the inside for rapid exit, this lock ensures convenience and security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQDG Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQDG1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQDG4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQDG1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQDG4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove the keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQDG1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQDG4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQDG1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQDG4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BQK Superlock Bolt-On Quick Exit Key Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQK Superlock bolt-on quick exit key access lock is designed for gates that require a rapid exit option. Featuring a green push pad for easy exit, this lock also includes key entry from the outside. Made from stainless steel, the BQK Superlock ensures ultimate outdoor durability and long-lasting performance. The lock is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit Key access on one side, push pad on the other Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQK Superlock bolt-on quick exit key access lock is ideal for gates that need a fast and secure exit solution. The green push pad on the inside facilitates rapid exit, while key access on the outside ensures security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQK Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQK1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQK4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQK1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQK4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQK1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQK4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQK1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQK4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BDGS Superlock Digital Single Sided | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BDGS Superlock digital single-sided lock combines the convenience of a mechanical keypad with the ease of installation of the Superlock range. This lock is perfect for securing box section metal gate frames, offering durability and security with a slim 70mm wide lock case and an adjustable latchbolt for precise fitting. Made from stainless steel, it ensures ultimate outdoor durability and long-lasting performance. Key Features Digital single-sided lock with keypad on one side Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Durable design reduces friction and wear Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BDGS Superlock digital single-sided lock provides a secure and durable locking solution for metal gate frames up to 60mm. This lock features a keypad on one side, ensuring convenience and security from one direction. The slim design makes it easy to fit on most gate frames, while the adjustable latchbolt allows for precise installation. Constructed from stainless steel, the BDGS Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. Additionally, the latchbolt is supported on the edge of the gatepost to minimize friction and wear, enhancing the lock's lifespan. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BDGS1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BDGS4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BDGS1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BDGS4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 6 months: Remove the keypad from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BDGS1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BDGS4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BDGS1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BDGS4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BDG Superlock Digital Double Sided | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BDG Superlock digital double-sided lock is a perfect solution for securing box section metal gate frames. This lock combines durability and ease of installation, featuring a slim 70mm wide lock case and an adjustable latchbolt for precise fitting. Made from stainless steel, it ensures ultimate outdoor durability and long-lasting performance. Key Features Digital double-sided lock with keypads on both sides Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Durable design reduces friction and wear Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BDG Superlock digital double-sided lock provides a secure and durable locking solution for metal gate frames up to 60mm. This lock features keypads on both sides, ensuring convenience and security from either direction. The slim design makes it easy to fit on most gate frames, while the adjustable latchbolt allows for precise installation. Constructed from stainless steel, the BDG Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. Additionally, the latchbolt is supported on the edge of the gatepost to minimize friction and wear, enhancing the lock's lifespan. This lock is non-handed, making it suitable for both left and right hand gates. It comes in two models to fit different gate frame sizes: BDG1030: Fits 10-30mm (1/2" - 1-1/4") gate frames BDG4060: Fits 40-60mm (1-1/2" - 2-1/4") gate frames Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 6 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BDG1030 Fits 10-30mm (1/2" - 1-1/4") gate frames BDG4060 Fits 40-60mm (1-1/2" - 2-1/4") gate frames Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BLD Superlock Bolt-On Latch Deadlock | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BLD Superlock bolt-on latch deadlock is a new generation, easy-to-fit lock for metal gates. Combining the convenience of a latch with the security of a deadlock, this versatile lock features a slim 70mm width, making it suitable for most gate designs. Made from stainless steel, it is designed for ultimate outdoor durability. Key Features Combination of latch and deadlock for convenience and security Slim 70mm (2 3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Fits both left hand and right hand gates Supplied with handles - available in plain black or traditional styles Includes bolt support plate and gate post strike plate Product Description The Gatemaster BLD Superlock bolt-on latch deadlock offers a robust and reliable locking solution for gate frames up to 60mm. Its unique design provides both the convenience of a latch and the security of a deadlock, making it a versatile choice for various gate designs. The slim 70mm lock case allows for easy installation, and the latchbolt is adjustable in length for precise fitting on site. The latchbolt can be easily rotated to accommodate both left and right handed gates. This lock is made from stainless steel, ensuring long-lasting durability in outdoor conditions. The BLD Superlock is supplied with handles in two styles: plain black and traditional, to suit different aesthetic preferences. The lock is also equipped with a bolt support plate and a gate post strike plate, making installation straightforward. The BLD Superlock is available in four models: BLD1030P: Fits 10-30mm gates with plain black handle BLD4060P: Fits 40-60mm gates with plain black handle BLD1030T: Fits 10-30mm gates with traditional handle BLD4060T: Fits 40-60mm gates with traditional handle The locking bolt is adjustable, with the latch retracting 15mm (5/8") and the deadbolt throwing out 15mm (5/8"). This product is perfect for both left hand and right hand gates, providing versatility in application. Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill a second 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the latchbolt through the middle hole. Lock the latchbolt and deadbolt with the hex key supplied by inserting the hex key into the end of the latchbolt and the deadbolt. Fix lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt and deadbolt move freely. Fix strike plate by either welding or screw fixing onto the gate post. Maintenance: Every 6 months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray mechanism with light oil. Product Details Product CodeDescription BLD1030P Standard superlock for 10-30mm gates - plain black handle BLD4060P Standard superlock for 40-60mm gates - plain black handle BLD1030T Standard superlock for 10-30mm gates - traditional handle BLD4060T Standard superlock for 40-60mm gates - traditional handle Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BK Superlock Bolt On Keylatch | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BK Superlock bolt on keylatch combines the convenience of a latch with the security of a deadlock, making it a versatile choice for various gate designs. Its slim 70mm width ensures it fits most gate frames, providing both durability and ease of installation. Made from stainless steel, this keylatch is designed for ultimate outdoor durability. Key Features Combination of latch and deadlock for convenience and security Slim 70mm (2 3/4") wide lock case Made from stainless steel for outdoor durability Key operated latch - simply slam the gate shut and open with the key Adjustable and removable latchbolt for easy fitting Fits both left hand and right hand gates Includes bolt support plate and gate post strike plate Comes with 3 keys Product Description The Gatemaster BK Superlock bolt on keylatch is a robust and reliable locking solution for gate frames up to 60mm. Its unique design features a combination of a latch and deadlock, providing both convenience and enhanced security. The slim 70mm wide lock case allows for easy installation on most gate designs. Constructed from stainless steel, this keylatch is built to withstand outdoor conditions, ensuring long-lasting durability. The latchbolt is adjustable in length for precise fitting on site and can be easily rotated to accommodate both left and right handed gates. The lock is supplied with a bolt support plate and a gate post strike plate, making installation straightforward. The BK Superlock is available in two models: BK1030: Fits flat bar and up to 30mm (1 1/4") box section BK4060: Fits 40 to 60mm (1 1/2" to 2 1/4") box section The locking bolt is adjustable, and the latch retracts 15mm (5/8"). This product is perfect for both left hand and right hand gates, providing versatility in application. Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill a second 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the latchbolt through the middle hole. Lock the latchbolt in place with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix strike plate by either welding or screw fixing onto the gate post. Maintenance: Every 6 months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray mechanism with light oil. Product Details Product CodeDescription BK1030 To fit flat bar and up to 30mm (1 1/4") box section BK4060 To fit 40 to 60mm box section (1 1/2" to 2 1/4") Dimensions Specific dimensions are available upon request or from the product specifications sheet.