GATEMASTER DGLS Select Pro Digital Gatelock - Fits Up to 60mm Gate Frame

Product Overview The DGLS Select Pro Digital Gatelock offers a keyless entry solution for gates, perfect for increasing security and convenience. This single-sided digital lock features access via code entry and a simple lever/handle action to exit. Designed with marine grade materials, this lock is built to last and withstand harsh conditions. Key Features Single-sided digital access: Enter the code to unlock, exit with a simple lever/handle action. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Marine grade keypad ensures long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Latchbolt moves 22mm (7/8"). Includes a brushed finish stainless steel bolt support plate with brass bearing to reduce friction and wear, enhancing product life. Strike plate included for smooth operation. Hold-back function allows the gate to remain unlocked for short periods. Product Details Product CodeDescription DGLS01R To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand DGLS01L To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand DGLS02R To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand DGLS02L To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when the gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length and/or change to RH/LH, insert a 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER DGL Select Pro Digital Gatelock Double Sided - Fits Up to 60mm Gate Frame

Product Overview The DGL Select Pro Digital Gatelock is designed for those seeking keyless entry through gates. This double-sided digital lock allows access via code from both sides, ensuring secure and convenient entry. Made with marine grade keypads, it is built for durability and heavy use. The lock automatically latches into the gate frame when the gate closes, and can only be removed when the gate is open, requiring the code. Key Features Double-sided digital access via code from both sides. Auto-latching mechanism: closes the door and latches the latchbolt into the gate frame. Marine grade keypads ensure long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Adjustable latchbolt that moves 22mm (7/8"). Brushed finish stainless steel bolt support plate with brass bearing reduces friction, wear, and increases product life. Includes strike plate. Product Details Product CodeDescription DGL01 To fit 10-30mm (1/2" - 1-1/4") gate frames DGL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length or change to RH/LH, insert 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER SBD Select Pro Bolt-on Deadlock - No Handle - Fits Up to 60mm Gate Frame

Product Overview The SBD Select Pro bolt-on deadlock is a convenient and robust locking solution for various applications. Designed to eliminate the need for padlocks or slide bolts, this deadlock secures gates with a simple turn of the key, extending the stainless steel deadbolt 30mm. It is perfect for heavy use gates in communal areas, schools, and alleys. Key Features Keyed access on both sides. Compatible with both left-hand and right-hand gates. Adjustable deadbolt (up to 27mm) for precise fitting on site. One-piece machined stainless steel locking bolt. Easy installation with only three holes required in the gate frame. 5 pin eurocylinder for enhanced security. Supplied with a bolt support plate featuring a brass bearing to reduce friction and wear, increasing product life. Designed for heavy use gates. 30mm bolt throw for added security. Square case design easily incorporates into various gate designs. Marine grade, salt spray tested for 1000 hours. Product Details Product CodeDescription SBD1601 To fit 10-30mm (1/2" - 1-1/4") gate frames SBD1602 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Deadbolt: Adjustable, moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using the stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill a clearance hole in the keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit the strike plate by either welding or screw fixing it to the gate post. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER APS Hydraulic Gate Closer & Hinge Kit | Safe & Reliable Self-Closing Gates

Product Overview The APS Hydraulic Gate Closer & Hinge Kit is designed to provide safe and reliable gate closing using proven hydraulic technology. This kit is ideal for gates that need to be self-closing, ensuring security and convenience without the need for power. The kit comes with either a standard wrap-around hinge (APS) or a stop hinge (APSSTOP) that prevents the gate from opening more than 100°. Key Features Hydraulic gate closer and top hinge kit for self-closing gates Suitable for gates up to 150kg No power required Fully adjustable ROSPA compliant closing speed with closing and latching speed adjustments Robust closer unit fitted underneath the gate, acts as a load-bearing lower hinge Unobtrusive and highly vandal-resistant design Includes a top hinge assembly that is fully adjustable for correct gate positioning Product Description The APS Hydraulic Gate Closer & Hinge Kit is an advanced solution for gates requiring reliable and safe self-closing functionality. The hydraulic closer and hinge kit is suitable for gates weighing up to 150kg and does not require any power source, making it an efficient and eco-friendly choice. The closer unit, fitted underneath the gate, also serves as a load-bearing lower hinge, ensuring robustness and stability. The kit includes fully adjustable closing and latching speed settings, compliant with ROSPA standards, to provide controlled and safe gate operation. The hydraulic gate closer is unobtrusive and highly resistant to vandalism, ensuring long-lasting durability and security. Additionally, the top hinge assembly is fully adjustable, allowing for precise gate positioning after installation. The APS kit comes in two versions: APS: Hydraulic gate closer with standard wrap-around hinge APSSTOP: Kit with a special stop hinge to prevent the gate from opening more than 100°, protecting the closer from damage Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Attach the hydraulic gate closer unit underneath the gate, ensuring it acts as the load-bearing lower hinge. Install the top hinge assembly, adjusting as necessary to position the gate correctly. Adjust the closing and latching speed settings to ensure safe and controlled gate operation. Maintenance Regular maintenance will ensure the longevity and proper functioning of the APS Hydraulic Gate Closer & Hinge Kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the closer and hinges for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription APS Hydraulic gate closer with standard wrap-around hinge APSSTOP Kit with special stop hinge to prevent gate from opening more than 100°, protecting the closer from damage Dimensions Specific dimensions are available upon request or from the product specifications sheet. For more information, refer to the specification sheet available for download.