FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates up to 2,3m

FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates OIL-HYDRAULIC Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by special key. ROBUST Structure entirely made of aluminium. Simple to install and adjust. It comes in a kit format including the accessories. VERSATILE Several options are available such as reversible non locking, locking by hydraulic device in closed gate position or double locking. TECHNICAL DATA Rod stroke (mm) 235 Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Power yield (W) 180 Max. absorbed current (A) 1.2 Pump flow rate (l/min) 1,4 (P5) Rod diameter (mm) 16 Linear speed opening (mm/s) ~ 16 Linear speed closing (mm/s) ~ 16 Opening force (N) 0 ÷ 5.100 Closing force (N) 0 ÷ 6.200 Working temperature (°C) -25°C / +80°C Oil type 708L Grade of protection IP 67 Frequency of use intensive Weight (kg) 9.5   PRODUCT GUIDE CODE VERSION LH/RH POWER (kW / HP) HYDRAULIC LOCKING SINGLE GATE MAX. WIDTH (m)* SINGLE GATE MAX. WEIGHT (kg)* STOCK F/887L-SX 230 Vac 1PH LH 0,18 / 0,25 not locking 2,3 400 Available F/887L-DX 230 Vac 1PH RH 0,18 / 0,25 not locking 2,3 400 Available F/888L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/888L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/889L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate opened and closed 2,3 400 Available F/889L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate opened and closed 2,3 400 Available  * The gate structure, size and possible strong winds may affect the values as indicated. Always make sure the gate is adequate to be automatically operated and remove any possible friction points NOTE: See product brochure in manual for additional information Please call the office for discounts on these and to specify other details of the purchase. 01564 731035 We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.  

FADINI JUNIOR 650 KIT 230 Vac for Sliding Gates up to 1200 kg

FADINI JUNIOR 650 KIT 230 Vac for Sliding Gates up to 1200 kg  650K0VL KIT CONTAINS 1x F/650L - 230 Vac geared motor operator with ELPRO 63 control unit, magnetic limit switch, speed 10 m/min 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate 651K0VL KIT CONTAINS 1x F/650L - 230 Vac geared motor operator with ELPRO 63 control unit, magnetic limit switch, speed 10 m/min 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI JUNIOR 633 KIT 230 Vac for Sliding Gates up to 600 kg

FADINI JUNIOR 633 KIT 230 Vac for Sliding Gates up to 600 kg  633K0VL KIT CONTAINS 1x F/633L - 230 Vac geared motor operator with ELPRO 63 control unit, magnetic limit switch, speed 10 m/min 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate 634K0VL KIT CONTAINS 1x F/633L - 230 Vac geared motor operator with ELPRO 63 control unit, magnetic limit switch, speed 10 m/min 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI JUNIOR 624 KIT 24 Vdc for Sliding Gates up to 400 kg

FADINI JUNIOR 624 KIT for Sliding Gates up to 400 kg  624K0VL KIT CONTAINS 1x F/624L - 24 Vdc geared motor operator with ELPRO 62 control unit, magnetic limit switch, speed 12 m/min 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate 625K0VL KIT CONTAINS 1x F/624L - 24 Vdc geared motor operator with ELPRO 62 control unit, magnetic limit switch, speed 12 m/min 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI F/650L JUNIOR 650 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 1200 kg

Product Overview The FADINI JUNIOR 650 230Vac electromechanical geared motor operator is designed for sliding gates up to 1200 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 650 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 650, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 650 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 510 Max. absorbed current (A) 2.4 Max. torque (N) 1,000 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:32 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 13.5 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/633L JUNIOR 633 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 600 kg

Product Overview The FADINI JUNIOR 633 230Vac electromechanical geared motor operator is designed for sliding gates up to 600 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 633 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 633, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 633 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 400 Max. absorbed current (A) 2 Max. torque (N) 600 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:31 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 11.3 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/624L JUNIOR 624 24Vdc Electromechanical Geared Motor Operator for Sliding Gates up to 400 kg

Product Overview The FADINI JUNIOR 624 24Vdc electromechanical geared motor operator is designed for sliding gates up to 400 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 24Vdc geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Pre-set for battery backup in case of power failure Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 624 offers a powerful and quiet solution for automating sliding gates. The 24Vdc geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 624, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates and pre-set for battery backup to ensure continuous operation during power failures. The JUNIOR 624 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Motor voltage (V) 24 Max. absorbed power (W) 220 Max. absorbed current (A) 6.3 Max. torque (N) 400 Motor revolutions (rpm) 3,000 Speed (m/min) 12 Gear ratio 1:61 Working temperature (°C) -25 ÷ +50 Grade of protection IP 54 Oil type F/706L Weight (kg) 11 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI MEC 200 Electromechanical Geared Motor Operator for Sliding Gates

FADINI MEC 200 Electromechanical Geared Motor Operator for Sliding Gates POWERFUL 230 Vac and 400 Vac geared motor operator, coupling of worm and bronze crown gear in oil bath, on ball bearings. RELIABLE Aluminium gear box and cover are a total guarantee of long life over the time. SAFE Adjustable torque control provided by a mechanical clutch system; the discs are lubricated by multifunctional grease to improve performance. STRONG AND COMPACT Base plate of pressure cast aluminium. VERSATILE Full range of models with various types of electric motors, options with air-cooled motors and electro-brake available. Depending on the way the rack is fixed on to the gate, models with horizontal or vertical pinion are available. The electronic control unit can be incorporated inside MEC 200 or stand alone in a polycarbonate box. TESTED AND CERTIFIED CE marking following type tests. SPECIFICATIONS   0,5 HP - 1PH 0,5 HP - 3PH 1 HP - 1PH 1 HP - 3PH 1,5 HP - 3PH Power supply (Vac – Hz) 230 - 50 230/400 - 50 230 - 50 230/400 - 50 230/400 - 50 Max. absorbed power (W) 510 575 1.130 1.030 1.500 Max. absorbed current (A) 2,4 2,1/1,2 5,7 3,7/2,2 5,1/3 Power yield (W) 0,37 0,37 0,73 0,73 1,1 Motor revolutions (rpm) 1.380 1.380 1.380 1.380 1.380 Capacitor (μF) 20 - 40 - - Rated torque (Nm) 40 40 80 80 110 Travel speed (m/min) 10 10 10 10 10 Gear ratio 1/32 1/32 1/32 1/32 1/32 Working temperature (°C) -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 Limit switch mechanical mechanical mechanical mechanical mechanical Grade of protection IP 55 55 55 55 55 Oil type F/706L F/706L F/706L F/706L F/706L Weight (kg) 19,5 o. - 19 v. 18,5 o. - 18 v. 23,5 o. - 23 v. 21,5 o. - 21 v. 25,5 o. - 25 v. Frequency of use very intensive very intensive very intensive very intensive very intensive PRODUCT CODE LIST / GUIDE PRODUCT CODE (click to view) VERSION HORIZONTAL / VERTICAL POWER (kW / HP) INCORPORATED CONTROL BOARD AIR-COOLED MOTOR WITH ELECTRO-BRAKE MAX. WEIGHT (kg) F/1964L 230 Vac 1PH o. Horizontal 0,37 / 0,5 - NO 1.200 F/1994L 230 Vac 1PH o. Horizontal 0,37 / 0,5 ELPRO 70/3 Plus NO 1.200 F/197567L 230 Vac 1PH o. Horizontal 0,73 / 1 - YES 1.800 F/196L 230/400 Vac 3PH o. Horizontal 0,37 / 0,5 - NO 1.250 F/197L 230/400 Vac 3PH o. Horizontal 0,73 / 1 - NO 1.850 F/198L 230/400 Vac 3PH o. Horizontal 1,1 / 1,5 - NO 2.000 F/199L 230/400 Vac 3PH o. Horizontal 0,37 / 0,5 ELPRO 70/3 Plus NO 1.250 F/19767L 230/400 Vac 3PH o. Horizontal 0,73 / 1 - YES 1.850 F/19867L 230/400 Vac 3PH o. Horizontal 1,1 / 1,5 - YES 2.000 F/2114L 230 Vac 1PH v. Vertical 0,37 / 0,5 - NO 1.200 F/2154L 230 Vac 1PH v. Vertical 0,37 / 0,5 ELPRO 70/3 Plus NO 1.200 F/212567L 230 Vac 1PH v. Vertical 0,73 / 1 - YES 1.800 F/211L 230/400 Vac 3PH v. Vertical 0,37 / 0,5 - NO 1.250 F/212L 230/400 Vac 3PH v. Vertical 0,73 / 1 - NO 1.850 F/213L 230/400 Vac 3PH v. Vertical 1,1 / 1,5 - NO 2.000 F/215L 230/400 Vac 3PH v. Vertical 0,37 / 0,5 ELPRO 70/3 Plus NO 1.250 F/21267L 230/400 Vac 3PH v. Vertical 0,73 / 1 - YES 1.850 F/21367L 230/400 Vac 3PH v. Vertical 1,1 / 1,5 - YES 2.000 F/7154L 230 Vac 1PH v. reversible Vertical 0,37 / 0,5 - NO 1.200 F/7155L 230/400 Vac 3PH v. reversible Vertical 0,37 / 0,5 - NO 1.250   NOTE: v. - vertical, o. - horizontal Each code includes an electromechanical geared motor operator with mechanical clutch, pinion for the rack, anchoring base plate for ground fixing with screws, mechanical limit switch, a pair of limit switch striking plates, release spanner. Electronic control unit and air-cooled motor with electro-brake are included only for the code numbers as indicated in the chart. The gate structure, size and possible strong winds may affect the value of indicated max. weight. Always make sure the gate is adequate to be automatically operated and remove any possible friction points. Reversible versions are possible to open or close by hand in case of power failure; no need that release handle or release spanner be operated. IP55 when inside the housing cover or casing.

FADINI NYOTA 115 EVO | Electromechanical Geared Motor Operator for Sliding Gates | Powerful and Stylish

Product Overview The FADINI NYOTA 115 EVO electromechanical geared motor operator is a powerful and stylish solution for automating sliding gates. Available in 230 Vac and 400 Vac, it features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth operation. Key Features 230 Vac and 400 Vac geared motor operator Aluminium gearbox and cover for long-term durability Anti-crush system with encoder and amperometric detection Electronic brake, acceleration, and deceleration on each cycle Versatile range of models with various electric motors CE marked and tested for compliance Master/slave function for bi-parting sliding gates Product Description The FADINI NYOTA 115 EVO offers powerful and reliable performance for sliding gates, combining advanced technology with durable construction. The aluminium gear box and cover ensure longevity, while the anti-crush system provides enhanced safety by reversing gate travel upon detecting obstacles. This motor operator is available in several models, each tailored to different power requirements and gate weights. The electronic control unit can be incorporated inside the NYOTA 115 EVO or housed in a separate polycarbonate box, providing flexibility in installation. Programming gate travel is simplified with a button, and the system includes features such as electronic brake, acceleration, and deceleration for smooth operation. Specifications Feature0.5 HP - 1PH0.5 HP - 3PH1 HP - 1PH1 HP - 3PH Power supply (Vac – Hz) 230 - 50 230/400 - 50 230 - 50 230/400 - 50 Max. absorbed power (W) 600 575 1,130 1,030 Max. absorbed current (A) 3.2 2.1/1.2 5.7 3.7/2.2 Power yield (W) 0.37 0.37 0.73 0.73 Motor revolutions (rpm) 1,380 1,380 1,380 1,380 Capacitor (μF) 30 - 30/40 - Rated torque (Nm) 40 40 80 80 Travel speed (m/min) 10 10 10 10 Gear ratio 1/32 1/32 1/32 1/32 Working temperature (°C) -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 Motor thermal protection (°C) 160 160 160 160 Limit switch magnetic magnetic magnetic magnetic Grade of protection IP 55 55 55 55 Oil type F/706L F/706L F/706L F/706L Weight (kg) 18.5 18 20 19.5 Frequency of use very intensive very intensive very intensive very intensive Product Code List / Guide F/1113L - 230/400 Vac 3PH, 0.37 kW / 0.5 HP, 1,250 kg max weight F/1114L - 230/400 Vac 3PH, 0.73 kW / 1 HP, 1,850 kg max weight F/1116L - 230 Vac 1PH, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1117L - 230 Vac 1PH, 0.73 kW / 1 HP, 1,800 kg max weight F/1121L - 230 Vac 1PH, 0.37 kW / 0.5 HP, ELPRO 12 EVO, 1,200 kg max weight F/1122L - 230 Vac 1PH, 0.73 kW / 1 HP, ELPRO 12 EVO, 1,800 kg max weight F/1269L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1271L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, ELPRO 12 PLUS FN, 1,200 kg max weight Notes: Each code includes an electromechanical geared motor operator with pinion for the rack, anchoring base plate with screws for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The electronic control unit and encoder are included only for the code numbers as indicated in the chart. The gate structure, size, and possible strong winds may affect the value of indicated max. weight. Always make sure the gate is adequate to be automatically operated and remove any possible friction points. Reversible versions are possible to open or close by hand in case of power failure; no need for the release handle or release spanner to be operated.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right or Left hand)

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right hand F/9879DXL or Left hand F/9879SXL) Two beams cut to measure, complete with joint, arm and cable. For driveways up to 6 m, beam up to 6.400 mm, for BAYT 980 automatic, right-hand and left-hand versions.  

FADINI F/9869L 12Vdc Green-Red LED for BAYT 980 beam

FADINI F/9869L 12Vdc Green-Red LED for BAYT 980 beam with LED lights 12 Vdc two-colour LED light (red-green) for the beams, complete with lens, support and cable

FADINI F/9860L Reinforcement beam 3m for BAYT 980 beam with LED lights

FADINI F/9860L Reinforcement beam 3m for BAYT 980 beam with LED lights Aluminium reinforcement beam x3.000 mm for products: F/9865L (only when a fence is fitted), F/9866L and F/9867L  

FADINI Fixed pedestal for BAYT 980 beam (various options)

FADINI Fixed pedestal for BAYT 980 beam (F/9752L, F/9755L, F/9756L, F/9757L, F/9758L, F/9759L) This is fixed pedestal for beam support. It comes in RAL 2002 and AISI 304 finishes, various heights and electromagnet lock and padlock. PRODUCT CODE FINISH HEIGHT LOCKING FULL DESCRIPTION F/9752L RAL 2002 orange red 840mm Padlock Fixed fork-end pedestal for beam support, designed for padlock. S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 840 mm F/9755L RAL 2002 orange red Various height options (min. 600 mm - max. 1.100 mm from ground level) Electromagnet lock F/2569L Adjustable fixed fork-end pedestal for beam support with various height options (min. 600 mm - max. 1.100 mm from ground level) designed for electromagnet lock (code F/2569L). S235JRH steel, cataphoresis treated and RAL 2002 orange red polyester powder coated. F/9756L RAL 2002 orange red 795mm Electromagnet lock F/2569L Fixed fork-end pedestal for beam support, designed for electromagnet lock (code F/2569L). S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 795 mm F/9757L AISI 304 stainless steel 795mm Electromagnet lock F/2569L AISI 304 stainless steel fixed fork-end pedestal for beam support, designed for electromagnet lock (code F/2569L). Height from ground level: 795 mm F/9758L RAL 2002 orange red 840mm - Fixed fork-end pedestal for beam support. S235JRH steel, cataphoresis treated and polyester powder coated in RAL 2002 orange red. Height from ground level: 840 mm F/9759L AISI 304 stainless steel 840mm - AISI 304 stainless steel fixed fork-end pedestal for beam support. Height from ground level: 840 mm  

FADINI F/5023L Rubber profile for BAYT 980 beam

FADINI F/5023L Rubber profile for BAYT 980 beam Rubber profile to be fitted under the aluminium beam  

FADINI F/1948L Articulated folding pedestal for BAYT 980 beam

FADINI F/1948L Articulated folding pedestal for BAYT 980 beam Aluminium folding lift-up pedestal, with adjustable foot  

FADINI F/1945L Reinforcement beam 3m for BAYT 980 beam

FADINI F/1945L Reinforcement beam 3m for BAYT 980 beam Aluminium reinforcement beam x3.000 mm for products: F/1942L (only when a fence is fitted), F/1943L and F/1944L  

FADINI F/1933L Aluminium expansion joint for BAYT 980 beam

FADINI F/1933L Aluminium expansion joint for BAYT 980 beam Aluminium expanding joint for beam assembling.  

FADINI F/1097L Set of 12 retroreflective red stickers for the BARRI 88 beams

FADINI F/1097L Set of 12 retroreflective red stickers for the BARRI 88 beams Set of 10 red reflecting beam stickers for BARRI 88.

FADINI F/1913L Set of 10 red reflecting beam stickers for BAYT 980

FADINI F/1913L Set of 10 red reflecting beam stickers for BAYT 980 Set of 10 red reflecting beam stickers for BAYT 980.  

FADINI F/9888L 24 Vac blue LED light complete with lens, support and power supply cable for BAYT 980

FADINI F/9888L 24 Vac blue LED light complete with lens, support and power supply cable for BAYT 980 24 Vac blue LED light for BAYT 980 complete with lens, support and power supply cable. To be fitted on the housing.  

FADINI F/9840L AL.FLEX 34 electronic control card for BAYT 980

FADINI F/9840L AL.FLEX 34 electronic control card for BAYT 980 AL.FLEX 34 electronic control card allowing the LED lights on the beam to work  

FADINI F/9897L Beam rotation device ALA.180 for BAYT 980

FADINI F/9897L Beam rotation device ALA.180 for BAYT 980 This device (ALA.180) allows for the beam to swing away (rotate) in the direction of the collision in case a vehicle crashes against it and is so designed to prevent the structural components of BAYT 980 automatic barrier and the beam from getting damaged. The device (ALA.180) can be supplied factory-fitted or be fitted to installations of BAYT 980 already existing. Limits of application: beam 6.400 mm max. or 4.200 mm max. with a fence

FADINI F/9873L 24Vdc Solenoid Valve for BAYT 980

FADINI F/9873L 24Vdc Solenoid Valve for BAYT 980 This is a Blackout device - in case of power failure, it is possible to raise the beam by hand.  It is always to be combined with the voltage stabilizer code F/9321L for the installation to work properly. The device is factory-fitted.  

FADINI Complete anchoring base plate with rag bolts for BAYT 980 - material is optional (F/9827L & F/9829L)

FADINI Complete anchoring base plate with rag bolts for BAYT 980 - material is optional (F/9827L & F/9829L) Complete anchoring base plate has two material options: Zinc-coated steel AISI 304 stainless steel

FADINI F/2569L 24 Vac magnetic lock for BAYT 980

FADINI F/2569L 24 Vac magnetic lock for BAYT 980 24Vac electromagnetic lock to be used on BAYT 980.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

FADINI F/7283L Electronic card traffic lights effect for BAYT 980

FADINI F/7283L Electronic card traffic lights effect for BAYT 980 Electronic card for controlling the led lights on the beam for traffic-lights effect: green light with beam in vertical position and red light with beam in horizontal position or in motion.  

FADINI F/2037L and F/2042L Pre-assembled loop 6m or 12m

FADINI F/2037L and F/2042L Pre-assembled loop 6m or 12m This pre-assembled loop has 2 options to choose from: F/2037L - 6 m circumference pre-assembled loop with 10 m power supply cable F/2042L - 12 m circumference pre-assembled loop with 15 m power supply cable

FADINI BAYT 980 Counterweights and Beam Truss Cables

FADINI BAYT 980 Counterweights and Beam Truss Cables  Each code bellow includes the complete kit in the indicated configuration, for installation on the BAYT 980 automatic barrier CODE (click to see) DESCRIPTION COUNTERWEIGHT (10 kg each) BEAM (m) FENCE F/1958L Kit of 4 stainless steel truss cables - 7,40 - F/1967L Kit of 4 stainless steel truss cables - 8,50 - F/1962L Zinc-coated steel counterweights kit with support for beam fixing 3 pz 7,40 - F/1965L Zinc-coated steel counterweights kit with support for beam fixing 4 pz 6,40 APPLICABLE F/1968L Zinc-coated steel counterweights kit with support for beam fixing 6 pz 7,40 APPLICABLE F/1969L Zinc-coated steel counterweights kit with support for beam fixing 7 pz 8,50 - F/1970L Zinc-coated steel counterweights kit with support for beam fixing 9 pz 8,50 APPLICABLE We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications

FADINI BARRI 88 230 Vac 4m automatic barrier for residential and collective applications ANTI-CRUSH SAFETY 230 Vac oil-hydraulic operator, beam slowdown in opening and closing. Ideal for residential and collective access control. QUICK AND SMOOTH MOVEMENTS Reinforced structure made of RAL 1018 zinc yellow powder coated steel, incorporated electronic control board. Anodized aluminium beam with an oval section design. TECHNICAL DATA Power Supply 230V AC - 50Hz Absorbed power 330 W Absorbed current 1,8 A Power yield (kW – HP) 0,24 - 0,33 Opening time (s) ~ 5 Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type 708L Weight without beam (kg) 58 Treatment and finishing Cataphoresis and polyester powder coating in RAL 1018 zinc yellow Frequency of use Intensive NOTE Single product includes a housing cabinet fitted with a door, two keys, B88 motor-pump and jack assembly, ELPRO 88 exp electronic control board, electric power supply and earth cables, aluminium beam 30x80x4.000 mm, flanged bracket to take and fasten the beam, zinc-coated fixing base plate with rag bolts and nuts. The housing is cataphoresis treated and polyester powder coated in RAL 1018 zinc yellow. Folding pedestal and fixed pedestal only for the codes as indicated in the chart.  

FADINI KIT DARDO 430 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 430 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 430 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vdc operators (F/430L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 43 control unit (F/4300L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT DARDO 424 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 424 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 24 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 424 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc operators (F/424L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 42 control unit (F/4200L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT NUPI 66 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT NUPI 66 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT NUPI 66 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/661L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 7 RP control unit (F/6610L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/6660K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/107L - TRIFO 11 pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/6661K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI DARDO 430 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 430 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 430 offers reliable and efficient gate automation. Key Features Quiet operation with 230 Vac irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 430 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 230 Vac irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 430 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 430 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 43 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 430, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 430 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Max. absorbed power: 300 W Max. absorbed current: 1.7 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 3,000 N Working temperature: -20°C to +50°C Motor thermal protection: 160°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 8 kg Frequency of use: Semi-intensive 35% Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI NUPI 66 | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI NUPI 66 is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and collective use. This operator combines safety, ease of installation, and high resistance to weather conditions, making it a reliable choice for gate automation. Key Features Safe operation with innovative valve assembly controlling thrust power Incorporated capacitor for enhanced performance Stylish design and high-quality materials for weather resistance Easy to install and adjust Quick-to-respond release system by key Tested and certified with CE marking Product Description The FADINI NUPI 66 oil-hydraulic operator is designed for the efficient automation of swing gates. It features an innovative valve assembly that allows for electronic control of the thrust power, ensuring safe and reliable operation. The stylish design and choice of high-quality materials make the NUPI 66 highly resistant to various weather conditions. Installation and adjustment of the NUPI 66 are straightforward, making it a practical choice for both residential and collective settings. The operator includes a quick-to-respond release system that can be easily accessed with a key, providing convenience in case of power failure or manual operation needs. The NUPI 66 is tested and certified, bearing the CE marking following rigorous type tests, ensuring compliance with European safety and performance standards. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Power yield: 180 W Max. absorbed current: 1.2 A Rod stroke: 235 mm Rod diameter: 16 mm Linear speed opening/closing: ~16 mm/s Opening force: 0 ÷ 5,100 N Closing force: 0 ÷ 6,200 N Working temperature: -25°C to +80°C Oil type: 708L Grade of protection: IP67 Weight: 9.5 kg Frequency of use: Intensive Note: Product includes an oil-hydraulic operator complete with rear and front fixing brackets to weld and two release keys. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm for residential and industrial use DISCREET For installation on gates where large pillars are involved: capable of a powerful though quiet action. Easy to install. OIL-HYDRAULIC Anti-crush safety ensured by the by-pass valves incorporated in the operator. Available with bidirectional oil-hydraulic locking device (irreversible). STRONG Cataphoresis treated steel, shearing preventing articulated arm. Manual override accessed by key. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Absorbed current (A) 1,2 Power yield (kW / HP) 0,18 / 0,25 Torque (Nm) 250-400 Shaft rotation 130° Opening-closing time (s) 23 Working temperature (°C) -20°C / +80°C Grade of protection IP 67 Oil type 708L Weight including arm(kg) 19 Frequency of use Semi-intensive   Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm, fixing bracket, two keys to access the release device. With gate leaves wider than 2 m it is required that an electric lock be fitted on to the gate.  

FADINI KIT BART 350 | Swing Gate Operator Kit | 300 kg, 2.3 m

Product Overview The FADINI KIT BART 350 is a comprehensive kit designed for automating swinging gates with leaves weighing up to 300 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 300 kg in weight and 2.3 m in length 24 Vdc geared motor operators for robust performance Master and slave control units for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT BART 350 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc geared motor operators, one master (F/351L) with the ELPRO 35M control unit and one slave (F/352L) with the ELPRO 35S control board, providing secure and synchronized operation of your gates. The included ZERO.PH surface mount photocells (F/140L) enhance safety by detecting obstacles and preventing accidents during gate movement. For remote operation, the kit features two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. Kit Contents for F/3520K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/3521K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

FADINI DRIVE 700 ESTRU | Hydraulic Motor-Pump for Swing Gates

Product Overview The FADINI DRIVE 700 ESTRU is a hydraulic motor-pump specifically designed for swing gates used in residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 ESTRU features a separately installed oil-hydraulic motor-pump, ensuring efficient operation and easy maintenance. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 ESTRU hydraulic motor-pump is designed to meet a wide range of installation requirements for swing gates. This motor-pump is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump is installed separately from the jack, which is housed in an aluminum foundation box for enhanced durability. The DRIVE 700 ESTRU offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700 ESTRU, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic motor-pump with joints, manual release knob, and electric power supply cable. An electric lock is required for the non-locking reversible version.

FADINI DRIVE 700 | Oil-Hydraulic Jack for Swing Gates

Product Overview The FADINI DRIVE 700 is an oil-hydraulic underground operator designed for swing gates in both residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 features an oil-hydraulic motor-pump installed separately from the jack, which is housed inside an aluminum foundation box with a steel fixing plate treated with electrolytic galvanization. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 oil-hydraulic jack is designed to meet a wide range of installation requirements for swing gates. This operator is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump and jack are installed separately, with the jack housed in an aluminum foundation box for enhanced durability. The DRIVE 700 offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic jack. The foundation box is not included. An electric lock is required for gate leaves wider than 2 meters.

FADINI HINDI 880 SPRINT KIT | Swing Gate Operator | 400 kg, 2.3 m

Product Overview The FADINI HINDI 880 SPRINT KIT is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.3 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI HINDI 880 SPRINT KIT is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/888L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 27 control unit (F/7047L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential and commercial swing gate automation. Kit Contents 2x F/888L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/7047L - ELPRO 27 control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates OIL-HYDRAULIC The innovative EVO valve design allows, in a single model, to configure the hydraulic locking device as required: N reversible - non locking A locking in open position B locking in closed position BB bidirectional locking (locking in open and closed position) Hydraulic slowdown (braking) in opening only, in closing only, in opening and closing, or non braking at all. FUNCTIONAL Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by customized key. QUALITY Stylish design, external structure made of extruded anodized aluminium and accurate selection of high quality materials to ensure the utmost resistance to weather conditions. Easy to install: an adjustable ball bearing ring provides fixing on to the gate. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Rod stroke (mm) 150 280 400 Power supply (Vac – Hz) 230 - 50 230 - 50 230 - 50 Absorbed power (W) 250 250 250 Power yield (W) 180 180 180 Max. absorbed current (A) 1.2 1.2 1.2 Pump flow rate (l/min) 1,4 (P5) 1,4 (P5) | 0,85 (P3) 1,4 (P5) | 0,85 (P3) Rod diameter (mm) 20 20 20 Linear speed opening (mm/s) ~ 15 ~ 17 (P5) | ~ 11 (P3) ~ 17 (P5) | ~ 11 (P3) Linear speed closing (mm/s) ~ 14 ~ 14 (P5) | ~ 9 (P3) ~ 14 (P5) | ~ 9 (P3) Opening force (N) 0 ÷ 4.000 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) Closing force (N) 0 ÷ 5.600 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) Working temperature (°C) -25°C / +80°C -25°C / +80°C -25°C / +80°C Oil type 708L 708L 708L Grade of protection IP 67 67 67 Frequency of use very intensive very intensive very intensive Weight (kg) 9.5 11 14   PRODUCT GUIDE PRODUCT CODE (click to view) STROKE (mm) EVO HYDRAULIC LOCKING DEVICE BRAKING SLOWDOWN OPENING TIME (s) PUMP SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/870P5L 150 YES - ~10 P5 fast 1,5 300 F/87084P5L 150 YES YES ~10 + TR P5 fast 1,5 300 F/880P5L 280 YES - ~17 P5 fast 2,8 550 F/88084P5L 280 YES YES ~17 + TR P5 fast 2,8 550 F/880P3L 280 YES - ~26 P3 slow 3,2 550 F/88084P3L 280 YES YES ~26 + TR P3 slow 3,2 550 F/890P5L 400 YES - ~26 P5 fast 4 550 F/89084P5L 400 YES YES ~26 + TR P5 fast 4 550 F/890P3L 400 YES - ~37 P3 slow 4,5 550 F/89084P3L 400 YES YES ~37 + TR P3 slow 4,5 550 F/884P3L 400 - - ~ 45 P3 slow 8 550 F/88484P3L 400 - YES ~45 + TR P3 slow 8 550 TECHNICAL NOTES For gates wider than 2 m per leaf it is required that an electric lock be fitted. With gate leaves wider than 4 m, the reversible version (no hydraulic locking device) is recommended plus an electric lock on the gate. With all HINDI 880 EVO actuators whose valve configuration is reversible (no hydraulic locking device), an electric lock is required on to the gate. On request, HINDI 880 EVO P10 faster (twice as much approx.) than P5 model: it is advisable to consult our technical office for such installations. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

FADINI MEC 700/80 Ventil Motor Pump for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motor pump. TECHNICAL DATA - MEC 700/80 VENTIL MOTOR PUMP  Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 510 Absorbed current (A) 2,4 Max. pressure (atm) 40 Hydraulic pump flow rate (l/min) 1,6 [P6] | 2,6 [P12] Working temperature (°C) -25°C / 80°C Grade of protection IP/motor-pump 65 Oil type 708L Weight – code 7014P6L (kg) 10 Weight – code 7012L (kg) 5,5 Weight – code 7037L (kg) 7,2 Frequency of use Intensive   PRODUCT GUIDE PRODUCT CODE (click to view) HYDRAULIC LOCKING PUMP RESERVOIR TYPE F/7014P6L reversible P6 slow single F/7014P12L reversible P12 fast single F/7022P6L bidirectional P6 slow single F/7022P12L bidirectional P12 fast single F/701486P6L reversible P6 slow double F/701486P12L reversible P12 fast double F/702286P6L bidirectional P6 slow double F/702286P12L bidirectional P12 fast double   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes an oil-hydraulic motor-pump complete with joints, manual release knob and electric cable for power supply.

FADINI MEC 800 Special swing gate operator for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motorpump. TECHNICAL DATA - MEC 800 Special Rod diameter (mm) 22 Piston stroke (mm) 280 / 400 / 500 / 600 / 700 / 800 / 900 / 1.000 mm Force (N) 0 ÷ 7.000 N   PRODUCT GUIDE PRODUCT CODE (click to view) ROD STROKE (mm) BRAKING SLOWDOWN SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/7012L 280 - 2.8 400 F/701284L 280 on opening / closing 2.8 400 F/7037L 400 - 4 700 F/703784L 400 on opening / closing 4 700 F/7114L 500 - 5 700 F/711484L 500 on opening / closing 5 700 F/7115L 600 - 6 800 F/711584L 600 on opening / closing 6 800 F/7116L 700 - 7 900 F/711684L 700 on opening / closing 7 900 F/7117L 800 - 8 1000 F/711784L 800 on opening / closing 8 1000 F/7118L 900 - 9 1100 F/711884L 900 on opening / closing 9 1100 F/7119L 1000 - 10 1200 F/711984L 1000 on opening / closing 10 1200   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes a double-acting oil-hydraulic actuator complete with rear and front fixing plates to weld, joints and protection cover. [I]: TR is the slowdown time, a value changing according to the adjustment made on the actuator. [K]: The installation distances for the special strokes are meant to make the most of the slowdown on opening and closing. For these actuators contact our technical office in advance and provide the structural dimensions of the gate to be automated.

FADINI COMBI 787 | Oil-Hydraulic Underground Operator for Large Swing Gate

Product Overview The FADINI COMBI 787 is an oil-hydraulic underground operator designed for large swing gates, offering a discreet and robust solution for gate automation. This operator is housed inside a treated steel foundation box, providing high resistance to corrosion. The foundation box is also available in AISI 304 stainless steel as an option. The COMBI 787 is capable of a 110° shaft rotation angle, ensuring reliable and quiet operations. Key Features Oil-hydraulic motor-pump unit with integrated cylinder 110° shaft rotation angle Available with or without hydraulic locking device Hydraulic slowdown (braking) in opening and closing Flow regulator for precise control Anti-crush safety ensured by by-pass valves Easy emergency release from both inside and outside the gate Durable foundation box made of 5 mm thick electrolytically galvanized steel Optional AISI 304 stainless steel foundation box No particular maintenance required Product Description The FADINI COMBI 787 oil-hydraulic underground operator is designed for large swing gates, combining strength and discretion in a single, all-in-one unit. This operator is housed in a robust foundation box made of treated steel, ensuring high resistance to corrosion. The foundation box can accommodate mechanical gate stops, adjustable in both open and closed positions, and allows for installation or removal without detaching the gate. The COMBI 787 is available in various versions to meet different installation requirements. Options include reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, units with hydraulic slowdown (braking) in opening and closing, and units with flow regulators. The anti-crush safety feature is ensured by by-pass valves fitted to the operator. Emergency release is straightforward, thanks to a pressed steel bracket that is easy to operate from both inside and outside the gate using a specially designed spanner with an ergonomic grip. The operator is designed for intensive use, making it suitable for high-frequency operations. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 330 W Absorbed current: 1.8 A Power yield: 0.24 kW / 0.33 HP Torque: 250-400 Nm Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Opening/closing time: ~23 s (110°) Weight including box: 34 kg Frequency of use: Intensive Product Guide CODEBIDIRECTIONAL HYDRAULIC LOCKINGSLOWDOWN BRAKINGFLOW REGULATORSINGLE GATE MAXIMUM WIDTH (m)SINGLE GATE MAXIMUM WEIGHT (kg) F/787N3L NO NO NO 6 1000 F/7877BB3L YES NO NO 6 1000 F/78778BB3L YES YES NO 6 1000 F/787789BB3L YES YES YES 6 1000 F/7878N3L NO YES NO 6 1000 F/78789N3L NO YES YES 6 1000 F/78779BB3L YES NO YES 6 1000 F/7879N3L NO NO YES 6 1000 Note: Each code includes an oil-hydraulic operator complete with electric power supply cable. For codes including the letter “N” (non-locking, reversible), an electric lock is required. An electric lock is also necessary for gate leaves wider than 2 meters.

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° or 175° (click to view) shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 23 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/767N3DXL RIGHT NO NO NO 3 700 F/767N3SXL LEFT NO NO NO 3 700 F/7677BB3DXL RIGHT YES NO NO 3 700 F/7677BB3SXL LEFT YES NO NO 3 700 F/76778BB3DXL RIGHT YES YES NO 4 700 F/76778BB3SXL LEFT YES YES NO 4 700 F/767789BB3DXL RIGHT YES YES YES 4 700 F/767789BB3SXL LEFT YES YES YES 4 700 F/76779BB3DXL RIGHT YES NO YES 4 700 F/76779BB3SXL LEFT YES NO YES 4 700 F/7678N3DXL RIGHT NO YES NO 4 700 F/7678N3SXL LEFT NO YES NO 4 700 F/76789N3DXL RIGHT NO YES YES 4 700 F/76789N3SXL LEFT NO YES YES 4 700 F/7679N3DXL RIGHT NO NO YES 4 700 F/7679N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

FADINI CORAL | Hydraulic Bollard for Access Control

Product Overview The FADINI CORAL Hydraulic Bollard is a versatile solution for access control in residential, commercial, and industrial applications. Designed to manage traffic and secure sensitive areas, it is built to withstand heavy-duty use while maintaining ease of maintenance and installation. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Optional solenoid valve for automatic lowering during power failures Easy access to oil-hydraulic components for maintenance Scratch-proof, cataphoresis treated, and polyester powder coated steel cylinder Optional LED lights for enhanced visibility Hall effect limit switch sensors IP67 protection rating Supports a range of command and safety accessories Designed for heavy-duty service in extreme temperatures Product Description The FADINI CORAL hydraulic bollard is engineered for efficient access control in various environments. It features a hydraulic locking device that secures the bollard in its standing position, while an emergency manual lowering system ensures it can be quickly retracted when needed. The optional solenoid valve allows for automatic lowering during power failures, enhancing security and convenience. The bollard’s design facilitates easy access to its oil-hydraulic components, simplifying maintenance and reducing service times. The components are well-protected against rust and other environmental factors, ensuring long-term durability. The bollard is constructed from scratch-proof, cataphoresis treated, and polyester powder coated steel, providing a robust and resilient structure. Installation is straightforward, with a reduced weight pit that requires minimal excavation or brickwork. The bollard is available with optional LED lights for improved visibility and safety. It supports various command and safety accessories, allowing for precise control and reliable operation. Specifications Fully retractable, heavy-duty automatic bollard Incorporates oil-hydraulic motor pump unit and actuator Height from ground level: 500, 600, or 800 mm Cylinder diameter: 100 mm Cylinder thickness: 5 mm Cylinder material: S235JRH steel Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Impact resistance: 30,000 J Breakout resistance: 150,000 J Maximum static load: 20,000 kg (lowered position) Working temperature: -40°C to +80°C Power supply: 230 Vac ± 10%, 50 Hz Absorbed power: 330 W Frequency of use: 2,000 cycles/day Product Guide CODEHEIGHT (mm)LED LIGHTSSOLENOID VALVEWEIGHT (kg)RISING TIME (s)RISING SPEED (cm/s)LOWERING TIME (s)LOWERING SPEED (cm/s) F/1050L 500 NO NO 86 ∼4.7 11 ∼4.4 12 F/1052L 500 NO YES 86 ∼4.7 11 ∼4.4 12 F/1054L 500 YES NO 86 ∼4.7 11 ∼4.4 12 F/1057L 500 YES YES 86 ∼4.7 11 ∼4.4 12 F/1059L 600 NO NO 90 ∼5.6 11 ∼5.1 12 F/1063L 600 NO YES 90 ∼5.6 11 ∼5.1 12 F/1064L 600 YES NO 90 ∼5.6 11 ∼5.1 12 F/1067L 600 YES YES 90 ∼5.6 11 ∼5.1 12 F/1080L 800 NO NO 104 ∼7.5 11 ∼6.6 12 F/1082L 800 NO YES 104 ∼7.5 11 ∼6.6 12 F/1084L 800 YES NO 104 ∼7.5 11 ∼6.6 12 F/1087L 800 YES YES 104 ∼7.5 11 ∼6.6 12 Additional Information Each CORAL bollard includes a complete pit, cover plate, and moving cylinder made of cataphoresis treated steel and polyester powder coated in RAL 7016 anthracite grey. The bollard is complete with a head and rubber edge, approved retro-reflecting micro-prismatic high intensity adhesive film, electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and motor-pump drive unit, two limit switch sensors (bollard in standing and lowered positions), a release spanner, and a 10 m electric cable to power the hydraulic motor-pump drive unit and the limit switches. LED lights and a 24 Vdc solenoid valve with a 10 m electric cable are included only for the items indicated in the table.

FADINI TALOS C730 | Automatic Bollard for Perimeter Security

Product Overview The FADINI TALOS C730 F/9685L Automatic Bollard is specifically designed for perimeter security and traffic control in sensitive areas such as military stations, police headquarters, and airports. Engineered to withstand extreme impacts, this bollard is ideal for preventing unauthorized vehicle access and protecting high-security zones from potential terrorist attacks. The bollard has been tested to endure the impact of a 7.5-ton vehicle traveling at 48 km/h. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Burglar-proof cover plate to prevent unauthorized access Scratch-proof, cataphoresis treated, and polyester powder coated steel rising cylinder Optional AISI 304 stainless steel cover sleeve High breakout resistance: 750,000 J Integrated LED lights and hall effect limit switch sensors Heating device for cold climates (down to -40°C) Compatible with a range of command and safety accessories Product Description The FADINI TALOS C730 automatic bollard is engineered for the highest level of perimeter security and traffic control. Its robust construction features a hydraulic locking device to keep the bollard secure in its standing position, and an emergency manual lowering function is provided for critical situations. The bollard includes a burglar-proof cover plate, preventing unauthorized lowering and enhancing security. Built from scratch-proof, cataphoresis treated, and polyester powder coated steel, the TALOS C730 bollard ensures durability and longevity in demanding environments. It is also available with an AISI 304 stainless steel cover sleeve for added protection and aesthetic appeal. The bollard features integrated LED lights and hall effect limit switch sensors, improving visibility and providing precise operational feedback. The TALOS C730 is versatile and supports a wide range of command and safety accessories. It includes a beeper to signal movements and a heating device for reliable operation in extremely cold temperatures. The electronic control unit can manage several bollards simultaneously, making it suitable for large-scale security installations. Specifications Cylinder diameter: 275 mm Cylinder thickness: 12 mm Cylinder height from ground: 1,000 mm Cylinder material: S355J2H steel with optional AISI 304 brushed stainless steel sleeve Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Pit: Hot dip galvanization Rising time: ~5.00 s (20 cm/s) Lowering time: ~4.20 s (23 cm/s) Working temperature: -20°C to +80°C (-40°C with heater) Oil type: 708L Power supply: 230 Vac, 50 Hz Absorbed power: 1,850 W Absorbed current: 5 A Grade of protection IP/motor-pump: 67 Frequency of use: Heavy duty, 2,000 cycles/day Impact resistance: 250,000 J Breakout resistance: 750,000 J Maximum static load: 20,000 kg Dimensions (mm) Diameter: 275 Height: 1,000 Thickness: 12 Additional Information Each TALOS C730 bollard includes a complete pit, a moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with a head and rubber edge, and 12 amber-colour integrated LED lights. It also features approved retro-reflecting high intensity micro-prismatic adhesive film, an electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), a burglar-proof cover plate, and a release spanner with a triangular socket. The power supply cable is not included but is available in the section of the catalogue dedicated to bollard accessories.

FADINI TALOS M30 | Automatic Bollard for Perimeter Security

Product Overview The FADINI TALOS M30 F/9682L Automatic Bollard is specifically designed for perimeter security and traffic control in sensitive areas. It provides a high level of security, adhering to ASTM F2656-07, PAS 68:2013, and IWA 14-1 specifications. The bollard is built to withstand severe impacts and offers reliable operation in high-frequency usage environments. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Burglar-proof cover plate to prevent unauthorized access Scratch-proof, cataphoresis treated, and polyester powder coated steel rising cylinder Optional AISI 304 stainless steel cover sleeve High breakout resistance: 700,000 J Integrated LED lights and hall effect limit switch sensors Heating device for cold climates (down to -40°C) Compatible with a range of command and safety accessories Product Description The FADINI TALOS M30 automatic bollard is engineered for superior perimeter security and traffic control. The hydraulic locking device ensures the bollard remains secure in its standing position, while the emergency manual lowering function allows for quick retraction if needed. The bollard is protected by a burglar-proof cover plate, preventing unauthorized lowering. Constructed from scratch-proof, cataphoresis treated, and polyester powder coated steel, the TALOS M30 is designed to withstand harsh conditions and heavy impacts. The bollard is available with an optional AISI 304 stainless steel cover sleeve, offering additional durability and a sleek finish. Integrated LED lights and hall effect limit switch sensors enhance visibility and operational feedback. The TALOS M30 is highly versatile, supporting a wide range of command and safety accessories for reliable and precise control. A beeper signals movements, and a heating device ensures functionality in extremely cold temperatures down to -40°C. The electronic control unit can manage multiple bollards simultaneously, making it suitable for large installations. Specifications Cylinder diameter: 275 mm Cylinder thickness: 12 mm Cylinder height from ground: 800 mm Cylinder material: S355J2H steel with optional AISI 304 brushed stainless steel sleeve Treatment and finishing: Cataphoresis and polyester powder coating RAL 7016 Pit: Hot dip galvanization Rising time: ~4.50 s (18 cm/s) Lowering time: ~3.42 s (23 cm/s) Working temperature: -20°C to +80°C (-40°C with heater) Oil type: 708L Power supply: 230 Vac, 50 Hz Absorbed power: 1,100 W Absorbed current: 1.8 - 3.5 A Grade of protection IP/motor-pump: 67 Frequency of use: Heavy duty, 2,000 cycles/day Impact resistance: 150,000 J Breakout resistance: 700,000 J Maximum static load: 20,000 kg Dimensions (mm) Diameter: 275 Height: 800 Thickness: 12 Additional Information Each TALOS M30 bollard includes a complete pit, a moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with a head and rubber edge, and 12 amber-colour integrated LED lights. It also features approved retro-reflecting high intensity micro-prismatic adhesive film, an electrolytic galvanized steel housing assembly with an oil-hydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), a burglar-proof cover plate, and a release spanner with a triangular socket. The power supply cable is not included but is available in the section of the catalogue dedicated to bollard accessories.

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO - F/9690L and F/9689L PERIMETER SECURITY Intended for traffic control and protection of those sensitive areas (embassies, military bases, government palaces, banks, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to safely withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 80 km/h and stay intact and fully operative. EFO (Emergency Fast Operation) version also available for quick rising in an emergency. OIL-HYDRAULIC Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Drive unit with two lobe pumps. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered. STRONG Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 2.000.000 J. Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights. VERSATILE A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C, where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.  CERTIFICATES Classes of performance: K12 / M50 / C750 Certified: ASTM F2656-15 C750 PAS 68:2013 V/7500 (N3)/80 IWA 14-1:2013 V/7200 [N3C]/80 DIMENSIONS (mm) ø 275 h 1.000 δ 20 ADDITIONAL INFORMATION Each item includes an automatic bollard complete with pit, moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with head and rubber edge and No. 12 amber-colour integrated LED lights, approved retro-reflecting high intensity micro-prismatic adhesive film, electrolytic galvanized steel housing assembly with an oilhydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), burglar-proof cover plate and release spanner with triangular socket. The power supply cable is not included, it is though available in the section of the catalogue dedicated to the bollard accessories. SPECIFICATIONS TALOS BOLLARD TYPE TALOS M50 series Cylinder diameter (mm) 275 Cylinder thickness (mm) 20 Cylinder height from ground (mm) 1000 Cylinder material S355K2H steel Cylinder treatment and finishing cataphoresis and polyester powder coating RAL 7016 / AISI 304 brushed SS steel sleeve Pit hot dip galvanization Rising time (s) [cm/s] ~5,00 [20] / with EFO ~1,5 [50] Lowering time (s) [cm/s] ~3.20 [20] Working temperature (°C) -20 ÷ +80 (-40 with heater) Oil type 708L Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 3.100 (1.550 + 1.550) Absorbed current (A) 10 ÷ 13 Grade of protection IP/motor-pump 67 Frequency of use (cycles/day) heavy duty / 2.000 Impact resistance (J) 700.000 Breakout resistance (J) 2.000.000 Maximum static load (kg) 20.000

FADINI TALOS 94 / TALOS 96 | Automatic Bollards for Traffic Control

Product Overview The FADINI TALOS 94 and TALOS 96 automatic bollards are designed for effective traffic control in various settings, including residential, commercial, industrial, and urban areas. These fully retractable bollards are built to handle a high number of operations daily, ensuring reliable performance and enhanced security. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Optional solenoid valve for automatic lowering during power failures Obstacle detection to prevent rising when an obstacle is detected Heating device for cold climates (down to -40°C) Scratch-proof and corrosion-resistant construction Integrated LED lights for enhanced visibility Available in various heights and materials High Resistance Cylinder (HRC) models for greater breakout resistance Product Description TALOS 94 The FADINI TALOS 94 automatic bollard is recommended for controlling access in residential and commercial areas. It features a hydraulic locking device, obstacle detection, and a manual emergency lowering system. The bollard's components, including the motor pump and oil-hydraulic actuator, are housed within the bollard for easy maintenance and protection against rust and other environmental factors. The TALOS 94 is available in various configurations, with options for stainless steel or HRC cylinders for enhanced resistance. The bollard is equipped with hall effect limit switch sensors, a rubber-edged cylinder head, and integrated LED lights for improved safety and visibility. TALOS 96 The FADINI TALOS 96 automatic bollard is designed for locations requiring high breakout resistance, such as commercial centers and banks. It offers the same features as the TALOS 94 but with additional armoured security. The TALOS 96 is constructed to withstand heavy-duty usage and provides maximum security with its high resistance to impacts and breakouts. This model also features hydraulic locking, emergency manual lowering, and easy access to the hydraulic components for maintenance. The TALOS 96 is available in various configurations with HRC cylinders for superior breakout resistance. Specifications SpecificationTALOS 94 SeriesTALOS 96 Series Cylinder diameter (mm) 275 275 Cylinder thickness (mm) 4 12 Cylinder height from ground (mm) 500/600/700/800 500/600/700/800 Cylinder material Stainless steel AISI 304 / AISI 316 / RAL 1028 S355J2H steel Cylinder treatment and finishing Brushed Cataphoresis and polyester powder coating RAL 7016 Pit Hot dip galvanization Hot dip galvanization Working temperature (°C) -20 ÷ +80 (-40 with heater) -20 ÷ +80 (-40 with heater) Oil type 708L 708L Power supply (Vac – Hz) 230 - 50 230 - 50 Absorbed power (W) 1.100 1.100 Absorbed current (A) 1,8 ÷ 3,5 1.8 Power yield (kW / HP) 0,25 / 0,33 0,25 / 0,33 Grade of protection IP/motor-pump 67 67 Frequency of use (cycles/day) Heavy duty / 2.000 Heavy duty / 2.000 Impact resistance (J) 52.000 | 70.000 - HRC 60.000 | 90.000 - HRC Breakout resistance (J) 320.000 | 420.000 - HRC 450.000 | 550.000 - HRC Maximum static load (kg) 20.000 20.000 Overall Measurements (mm)   HeightConstrainth 500 200 830 500 400 1.010 600 200 1.010 600 400 1.210

Fadini BAYT 980 Automatic Barrier with Variable Options

Fadini BAYT 980 Barrier Oil-hydraulic road barrier with beams from 3m up to 8m depending on speed (faster means smaller beam). OIL-HYDRAULIC SAFETY 230 Vac oil-hydraulic operator, motor-pump and piston integrated in the assembly. Ideal for those installations where heavy duty specifications are to meet: car parks, private and public driveways, residential, urban and industrial areas. Various speed options, slowdown on opening and closing. ROBUST Reinforced structure made of powder coated steel to ensure a greater resistance to weathering or AISI 304 brushed stainless steel. Anodized aluminium beams with oval section, available in various lengths and coming with an aluminium expanding joint; high strength against winds. VERSATILE Wide range of accessories: beam with a fence underneath, beam with incorporated LED lights highly visible in dark conditions (flashing option as traffic lights on request), folding device for roofed applications, swing-away arm fastening plate preventing breakage in case of vehicle collision. QUICK INSTALLATION The electronic control board is located in the upper part of the housing in a dedicated and separated box. “master/slave” option available on request for opposing barriers. HANDY A version of this model can be fully operated by hands (max. beam length 6,40 m without fence). Ideal for places where no electric power supply is available. SPECIFICATIONS Power Supply 230V AC - 50Hz Absorbed power 510 W Absorbed current 2.4 A Power output 0,37 kW (0,5 HP) Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type FADINI oil Oil reservoir volume 2.5 litres Colour Variable - choose in options (Stainless Steel or Orange) Frequency of use very intensive   PRODUCT INCLUDES AND ADDITIONAL INFORMATION AISI 304 STAINLESS STEEL RAL 2002 / 9006 SW3061 Housing cabinet with door Two keys Motor-pump-piston assembly COS 982 Electronic control board ELPRO 980 Voltage cut-off switch Power supply and ground cables Flanged fastening plate to hold the aluminium beam  Stainless steel anchoring base plate with rag bolts and nuts Zinc-coated anchoring base plate with rag bolts and nuts    Blue LED light incorporated into the housing  The barrier body, top cover and door are AISI 304 brushed stainless steel. The barrier body is cataphoresis treated and polyester powder coated in two colours, body in RAL 2002 orange red, while top cover and door are 9006 SW3061 textured grey.   Beam and accessories (folding and fixed pedestals, etc.) not included; consult the specific section in the catalogue.      PRODUCT CODE LIST RAL VERSION CODE (click to see) STAINLESS STEEL CODE (click to see) VERSION SPEED (s) PISTON PUMP BEAM LIMIT (m) access width [ ] FENCE REINFORCEMENT BEAM CABLES KIT COUNTERWEIGHTS (10 kg each) F/9801DXL F/9811DXL right-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9801SXL F/9811SXL left-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9802DXL F/9812DXL right-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9802SXL F/9812SXL left-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9803DXL F/9813DXL right-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9803SXL F/9813SXL left-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9804DXL F/9814DXL right-handed    14  ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9804SXL F/9814SXL left-handed    14 ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9805DXL F/9815DXL right-handed     19 ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L F/9805SXL F/9815SXL left-handed     19  ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L

Fadini ELPRO 62 | Control Panel | 24V for JUNIOR 624 Gates

Product Overview The Fadini ELPRO 62 Control Panel is a 24V electronic programmer designed for the JUNIOR 624 gate operators. This control panel offers comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. The panel operates on a single phase power supply, ensuring reliable performance and ease of installation. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO 62 Control Panel enhances the functionality and safety of the JUNIOR 624 gate operators. This 24V electronic programmer supports precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 62, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 200 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 24 V DC/AC flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Motor run time: - Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 63 | Control Panel | Single Phase for JUNIOR 633 and 650

Product Overview The Fadini ELPRO 63 Control Panel is an advanced electronic programmer designed for the JUNIOR 633 and 650 gate operators. This control panel provides comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 63 Control Panel is designed to enhance the functionality and safety of the JUNIOR 633 and 650 gate operators. This single phase electronic programmer offers precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 63, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 375 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 230 V - 25W max flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Motor run time: - Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO 980 | Control Panel | Single Phase for BAYT 980 Barriers

Product Overview The Fadini ELPRO 980 Control Panel is an advanced single phase electronic controller specifically designed for the BAYT 980 barriers. This control panel offers a range of functions to ensure smooth and efficient barrier operation, including step-by-step function, deadman (hold on switched) control, and both automatic and semiautomatic modes of operation. It is also preset to operate two synchronized barriers simultaneously (Master/Slave). Key Features Step-by-step function for precise control Deadman (hold on switched) control for safety Automatic and semiautomatic modes of operation Preset to operate two synchronized barriers simultaneously (Master/Slave) Connector for traffic light control card with 2/3 lights External time clock for preset opening and closing times Designed for BAYT 980 barriers Product Description The Fadini ELPRO 980 Control Panel is engineered to provide reliable and efficient control for BAYT 980 barriers. This single phase controller supports a variety of operational modes, including step-by-step function and deadman (hold on switched) control. These features ensure precise and safe barrier operation in various scenarios. The control panel offers both automatic and semiautomatic modes of operation, allowing flexibility to meet different user requirements. It is also preset to handle two synchronized barriers simultaneously, functioning as a master/slave system. This makes it an ideal solution for complex barrier installations where coordinated movements are necessary. The ELPRO 980 is equipped with a connector to accommodate a control card for traffic lights with 2/3 lights, further enhancing its versatility. Additionally, an external time clock allows for preset opening and closing operations, providing convenience and efficiency in managing barrier schedules. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: - Photocells/Keyswitch/Radio receiver output: - Pilot light output: - DSA control output: - Flasher output: - Motor run time: - Dwell time: - Box dimensions: - Protection standards: - Working temperature: -

Fadini ELPRO 12 EVO | Control Panel | Single Phase for NYOTA 115 EVO

Product Overview The Fadini ELPRO 12 EVO Control Panel is an advanced single phase electronic controller specifically designed for the NYOTA 115 EVO range of motor operators. This control panel is built to provide reliable and efficient control of gate operations, ensuring smooth and precise movements. It features multiple outputs and a range of programmable functions to suit various operational needs. Key Features Specifically designed for the NYOTA 115 EVO range of motor operators Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 12 EVO Control Panel is tailored to manage the NYOTA 115 EVO motor operators efficiently. It operates on a single phase power supply of 230 V ±10% at 50 Hz, providing a robust solution for gate automation. With a maximum motor power capacity of 750 W, it ensures powerful and reliable performance. This control panel includes several output options for enhanced functionality. The courtesy light output supports up to 230 V - 100 W for a maximum of 3 minutes, while the photocells/keyswitch/radio receiver output offers 24 V DC with a maximum of 500 mA. Additionally, the pilot light output provides 24 V DC - 3W max, and the flasher output supports 230 V DC/AC. The ELPRO 12 EVO allows for precise control over gate operation timings, with dwell times ranging from 2 to 128 seconds and pedestrian opening times adjustable between 2 to 30 seconds. It is designed to operate within a temperature range of -20°C to +55°C, making it suitable for various environmental conditions. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Motor run time: - Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO S40 | Control Panel | Single Phase, Max 4 Automatic Bollards

Product Overview The Fadini ELPRO S40 Control Panel is a single phase electronic controller designed to manage up to 4 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 4 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S40 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to four bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S40 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 2400 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 37 | Control Panel | Single/Three-Phase for Sliding Gates

Product Overview The Fadini ELPRO 37 Control Panel is a versatile electronic controller designed for sliding gates. It supports both single and three-phase applications, making it suitable for various installation needs. The control panel incorporates an electronic brake for enhanced performance and reliability. It features multiple outputs and a range of programmable functions to ensure smooth and efficient gate operation. Key Features Supports single and three-phase applications Incorporated electronic brake for improved control Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description The Fadini ELPRO 37 Control Panel is designed to provide reliable and efficient control for sliding gates. This electronic controller supports both single and three-phase applications, accommodating various power supply configurations. The integrated electronic brake enhances the control and safety of gate operations, ensuring smooth and precise movements. The control panel features a single phase PCB power supply (230 V ±10% 50/60 Hz) and a three-phase PCB power supply (400 V ±10% 50/60 Hz), allowing flexibility in installation. It supports motors with a maximum power of 750 W for single-phase and 1200 W for three-phase applications. The panel includes outputs for courtesy lights, photocells, keyswitch, radio receiver, pilot light, and DSA control, providing comprehensive control options. The motor run time is adjustable between 0 to 120 seconds, while the dwell time ranges from 1 to 220 seconds, and the pedestrian opening time is adjustable from 1 to 45 seconds. The control panel is housed in a compact box with dimensions of 210 x 295 x 110 mm, ensuring easy installation and integration. It is built to IP64 protection standards, making it suitable for various environmental conditions, and operates effectively in temperatures ranging from -20°C to +55°C. Specifications Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO S20 | Control Panel | Single Phase, Max 2 Automatic Bollards

Product Overview The Fadini ELPRO S20 Control Panel is a single phase electronic controller designed to manage up to 2 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 2 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S20 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to two bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S20 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 1200 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° (click to view) or 175° shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 28 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/769N3DXL RIGHT NO NO NO 3 700 F/769N3SXL LEFT NO NO NO 3 700 F/7697BB3DXL RIGHT YES NO NO 3 700 F/7697BB3SXL LEFT YES NO NO 3 700 F/76978BB3DXL RIGHT YES YES NO 4 700 F/76978BB3SXL LEFT YES YES NO 4 700 F/769789BB3DXL RIGHT YES YES YES 4 700 F/769789BB3SXL LEFT YES YES YES 4 700 F/76979BB3DXL RIGHT YES NO YES 4 700 F/76979BB3SXL LEFT YES NO YES 4 700 F/7698N3DXL RIGHT NO YES NO 4 700 F/7698N3SXL LEFT NO YES NO 4 700 F/76989N3DXL RIGHT NO YES YES 4 700 F/76989N3SXL LEFT NO YES YES 4 700 F/7699N3DXL RIGHT NO NO YES 4 700 F/7699N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

Fadini BAYT 980 barrier - Aluminium skirt for beams (variable sizes)

Aluminium skirt for beams of BAYT 980 barrier Available for different beam lengths It fits under the beam and makes the barrier clearly visible  

Fadini Bayt 980 | Aluminium Beams with Optional LEDs | Robust Performance

Product Overview The Fadini Bayt 980 Aluminium Beams are designed for robust and reliable performance, making them an ideal choice for enhancing your gate setup. These beams feature an oval section measuring 55x100 mm and come equipped with red retroreflective stickers, plastic plugs, and all necessary accessories for correct installation. For improved visibility and aesthetics, you can opt for the LED feature, adding an extra layer of functionality to your gate system. Key Features Robust aluminium beams with an oval section of 55x100 mm Optional LEDs for enhanced visibility and aesthetics Red retroreflective stickers for added safety Complete with plastic plugs and installation accessories Available in various lengths and configurations Product Description The Fadini Bayt 980 Aluminium Beams offer a durable and stylish solution for gate systems. These beams are available in several configurations to suit different access widths, with options for incorporating LEDs to boost visibility during low-light conditions. The beams are designed with an oval cross-section of 55x100 mm, providing a sleek and modern appearance. Each beam comes complete with red retroreflective stickers to enhance safety, plastic plugs, and all necessary accessories for a correct and secure installation. The Fadini Bayt 980 beams are suitable for a range of gate setups, providing both functional and aesthetic benefits. Available Configurations CODEBEAM (m)Access WidthN. OF LEDsN. OF JOINTS AND MODULES (m)Accessories for Correct Installation F/1936L 2.10 [1.75] - - - F/1937L 3.20 [2.85] - - - F/1940L 4.20 [3.85] - 1 (2.10+2.10) - F/1941L 5.30 [4.95] - 1 (2.10+3.20) - F/1942L 6.40 [6.05] - 1 (3.20+3.20) - F/1943L 7.40 [7.05] - 2 (2.10+2.10+3.20) F/1945L - F/1958L - F/1962L F/1944L 8.50 [8.15] - 2 (2.10+3.20+3.20) F/1945L - F/1967L - F/1969L F/9861L 2.10 [1.75] 4 - - F/9862L 3.20 [2.85] 6 - - F/9863L 4.20 [3.85] 8 1 (2.10+2.10) - F/9864L 5.30 [4.95] 10 1 (2.10+3.20) - F/9865L 6.40 [6.05] 12 1 (3.20+3.20) - F/9866L 7.40 [7.05] 14 2 (2.10+2.10+3.20) F/1945L - F/1958L - F/1962L F/9867L 8.50 [8.15] 16 2 (2.10+3.20+3.20) F/1945L - F/1967L - F/1969L Discount Offer We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout. Order Now Enhance your gate setup with the Fadini Bayt 980 Aluminium Beams. Order now and take advantage of our discount offer. For any questions or assistance, feel free to contact us.

Fadini F/748DXL Emergency Release Bracket RH

Fadini F/748DXL Emergency Release Bracket RH Pressed steel manual emergency release bracket with spanner

Fadini F/748SXL Emergency Release Bracket LH

Fadini F/748SXL Emergency Release Bracket LH Pressed steel manual emergency releas bracket with spanner

Fadini F/746DXL Plate RH

Fadini F/746DXL Right Handed Plate with F-ring with square hole, to be welded to the gate

Fadini F/746SXL Plate LH

Fadini F/746SXL Left Handed Plate with F-ring with square hole, to be welded to the gate

FADINI F/762L COMBI 740 | Stainless Steel Foundation Box | Aluminium Cover

Product Overview The F/762L COMBI 740 Stainless Steel Foundation Box with Aluminium Cover is a durable and reliable solution for various installations. This foundation box offers robust construction with a stainless steel body and an aluminium cover, ensuring longevity and resistance to corrosion. Key Features Stainless Steel Construction: Provides high durability and resistance to corrosion. Aluminium Cover: Lightweight yet strong, offering protection and easy handling. Suitable for Various Installations: Versatile use for different applications. Product Description The F/762L COMBI 740 Foundation Box is engineered to provide a robust and secure foundation for various installation needs. Made from high-quality stainless steel, this foundation box ensures exceptional durability and resistance to corrosion, making it ideal for long-term use. The included aluminium cover adds to the product's strength while maintaining a lightweight profile for ease of handling and installation. Product Options F/745L: Foundation Box, Zinc with Aluminium cover F/762L: Foundation Box, Stainless Steel with Aluminium cover F/751L: Stainless Steel Lid Choose the F/762L COMBI 740 for a reliable and durable foundation solution, tailored to meet the demands of various installation environments. For further inquiries or additional information regarding this product, please contact us through our inquiry form.

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops

FADINI F/7871L COMBI 787 Gate support enclosure complete with cover

FADINI F/7871LGate support enclosure complete with cover/foundation box for COMBI 787

FADINI F/745L COMBI 740 Zinc Coated Steel Foundation Box with Aluminium Cover

F/745L COMBI 740 Zinc Coated Steel Foundation Box with Aluminium Cover

Fadini F/7047L Elpro 27 | Single Phase Control Panel | Swing/Sliding Gates

Product Overview The Fadini Elpro 27 single phase control panel is designed to efficiently control single or double swinging gates as well as single or bi-parting sliding gates. This versatile electronic controller is equipped with motor capacitors and can handle motor operators with or without limit switches, making it suitable for a wide range of gate automation applications. Key Features Single phase PCB power supply: 230 V ±10% 50/60 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W max DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time: 1 - 220 S Closing gate delay time: 0-10 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description Fadini F/7047L Elpro 27 Single Phase Control Panel The Fadini Elpro 27 control panel is an advanced electronic controller designed for the automation of single or double swinging gates and single or bi-parting sliding gates. This controller is equipped with motor capacitors and supports motor operators with or without limit switches. The Elpro 27 is ideal for various gate automation applications, offering a single phase PCB power supply of 230 V ±10% 50/60 Hz, and a maximum motor power capacity of 750 W. Key outputs of the Elpro 27 include courtesy light output at 230 V - 100 W max, photocells/keyswitch/radio receiver output at 24 V AC, pilot light output at 24 V - 3W max, DSA control output at 24 V AC, and flasher output at 230 V - 25 W max. The control panel provides adjustable motor run time settings (0 - 120 S for sliding gates and 0 - 60 S for swing gates), dwell time (1 - 220 S), closing gate delay time (0-10 S), and pedestrian opening time (1 - 45 S). Encased in a durable box with dimensions of 210 x 295 x 110 mm, the Elpro 27 meets IP64 protection standards and operates efficiently in a working temperature range of -20°C to +55°C. This control panel ensures reliable and safe operation for various gate automation needs. Technical Specifications SpecificationDetails Single phase PCB power supply 230 V ±10% 50/60 Hz Max. power of motors 750 W Courtesy light output 230 V - 100 W max Photocells/Keyswitch/Radio receiver output 24 V AC Pilot light output 24 V - 3W max DSA control output 24 V AC Flasher output 230 V - 25 W max Motor run time 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time 1 - 220 S Closing gate delay time 0-10 S Pedestrian opening time 1 - 45 S Box dimensions 210 x 295 x 110 mm Protection standards IP64 Working temperature -20°C to +55°C

Fadini F/7426L COMBI 740 | Underground Kit | 175° Rotation, Double Locking & Braking

Product Overview The Fadini F/7426L COMBI 740 underground kit is a comprehensive solution for automating a pair of swing gates with a maximum width of 4 meters per leaf. It features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. This kit is ideal for both commercial and industrial installations. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini F/7426L COMBI 740 Underground Kit - 175 Degree Rotation with Double Locking and Braking The Fadini F/7426L COMBI 740 underground kit is designed to provide a complete and efficient solution for automating swing gates. This kit is rated among Arden Gates' TOP 5 products for its reliability and performance. Suitable for gates up to 4 meters per leaf, it features a compact, concealed assembly with an integrated oil hydraulic motor pump and jack for maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/7697BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/7697BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

Fadini COMBI 740 | Underground Kit | 110° Rotation, Double Locking & Braking

Product Overview The Fadini COMBI 740 underground kit is rated as one of Arden Gates' TOP 5 products. This complete solution is ideal for automating a pair of swing gates with a maximum width of 4 meters each leaf. It features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini COMBI 740 Underground Kit - 110 Degree Rotation with Double Locking and Braking The Fadini COMBI 740 underground kit is a top-rated product from Arden Gates, offering a comprehensive solution for automating swing gates up to 4 meters wide per leaf. This kit combines compactness and strength in a fully concealed design, integrating an oil hydraulic motor pump and jack within a single enclosure for a maintenance-free experience. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, featuring an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/76778BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/76778BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.

Fadini COMBI 740 | Underground Kit | Double Locking, 110° Rotation

Product Overview The Fadini COMBI 740 underground kit is a complete solution for automating a pair of swing gates with a maximum width of 3 meters each leaf. This kit features a compact, strong, and fully concealed assembly that includes an oil hydraulic motor pump and jack in a single enclosure, ensuring maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, and features an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Product Description Fadini COMBI 740 Underground Kit - Double Locking with 110 Degree Rotation The Fadini COMBI 740 underground kit is an advanced solution designed to automate swing gates efficiently and securely. This kit is ideal for gates up to 3 meters wide per leaf and features a compact and fully concealed installation that ensures a clean and unobtrusive look. The integrated oil hydraulic motor pump and jack system within a single enclosure ensure durability and maintenance-free operation. Key Features Compact and Concealed: The all-in-one design includes an oil hydraulic motor pump and jack, ensuring a neat and unobtrusive installation. Double Locking and Braking: Provides enhanced security and stability with braking in both directions. Reliable and Safe: Built with top-quality internal components for safe and quiet movements, and features an adjustable thrust power by pressure valves. Tested and Certified: C marked in compliance with ITT PDC No.2393-2008 type testing. Emergency Release: Includes a left-handed and right-handed emergency mechanical release bracket made of pressed steel with an ergonomic spanner. Technical Specifications SpecificationDetails Power Supply 230V AC - 50Hz Absorbed Power 250 W Absorbed Current 1.2 A Power Output 0.18kW (0.25HP) Torque 250 - 400Nm Working Temperature -20°C to +80°C Protection Standards IP67 Oil Type Fadini Oil Opening/Closing Time ~ 23 s (110°), ~ 28 s (175°) Weight with Enclosure 27kg Frequency of Use Very intensive Kit Components 1 x Left-handed COMBI 740 all-in-one underground operator (F/7677BB3SXL) 1 x Right-handed COMBI 740 all-in-one underground operator (F/7677BB3DXL) 1 x Left-handed emergency mechanical release (F/748SXL) 1 x Right-handed emergency mechanical release (F/748DXL) 2 x Zinc-coated steel enclosures (F/745L) 1 x Elpro 27 control unit (F/7047L) 1 x Astro 43 Radio receiver (F/4329L) 2 x Radio remotes (433.92MHz) (F/4321L) 1 x Aerial (F/4605L) 1 x Pair of safety photocells (F/550L) Kit Options 110° degree rotation - Double Locking & Braking (F/7423L) 110° degree rotation - Double Locking (F/7421L) 175° degree rotation - Double Locking (F/7426L) For more information or to purchase this kit, please contact our office.