FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right or Left hand)

FADINI F/9879 Two beams cut with joint, arm and cable for BAYT 980 (Right hand F/9879DXL or Left hand F/9879SXL) Two beams cut to measure, complete with joint, arm and cable. For driveways up to 6 m, beam up to 6.400 mm, for BAYT 980 automatic, right-hand and left-hand versions.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI DARDO 430 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 430 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 430 offers reliable and efficient gate automation. Key Features Quiet operation with 230 Vac irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 430 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 230 Vac irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 430 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 430 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 43 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 430, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 430 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Max. absorbed power: 300 W Max. absorbed current: 1.7 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 3,000 N Working temperature: -20°C to +50°C Motor thermal protection: 160°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 8 kg Frequency of use: Semi-intensive 35% Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI NUPI 66 | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI NUPI 66 is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and collective use. This operator combines safety, ease of installation, and high resistance to weather conditions, making it a reliable choice for gate automation. Key Features Safe operation with innovative valve assembly controlling thrust power Incorporated capacitor for enhanced performance Stylish design and high-quality materials for weather resistance Easy to install and adjust Quick-to-respond release system by key Tested and certified with CE marking Product Description The FADINI NUPI 66 oil-hydraulic operator is designed for the efficient automation of swing gates. It features an innovative valve assembly that allows for electronic control of the thrust power, ensuring safe and reliable operation. The stylish design and choice of high-quality materials make the NUPI 66 highly resistant to various weather conditions. Installation and adjustment of the NUPI 66 are straightforward, making it a practical choice for both residential and collective settings. The operator includes a quick-to-respond release system that can be easily accessed with a key, providing convenience in case of power failure or manual operation needs. The NUPI 66 is tested and certified, bearing the CE marking following rigorous type tests, ensuring compliance with European safety and performance standards. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Power yield: 180 W Max. absorbed current: 1.2 A Rod stroke: 235 mm Rod diameter: 16 mm Linear speed opening/closing: ~16 mm/s Opening force: 0 ÷ 5,100 N Closing force: 0 ÷ 6,200 N Working temperature: -25°C to +80°C Oil type: 708L Grade of protection: IP67 Weight: 9.5 kg Frequency of use: Intensive Note: Product includes an oil-hydraulic operator complete with rear and front fixing brackets to weld and two release keys. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm for residential and industrial use DISCREET For installation on gates where large pillars are involved: capable of a powerful though quiet action. Easy to install. OIL-HYDRAULIC Anti-crush safety ensured by the by-pass valves incorporated in the operator. Available with bidirectional oil-hydraulic locking device (irreversible). STRONG Cataphoresis treated steel, shearing preventing articulated arm. Manual override accessed by key. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Absorbed current (A) 1,2 Power yield (kW / HP) 0,18 / 0,25 Torque (Nm) 250-400 Shaft rotation 130° Opening-closing time (s) 23 Working temperature (°C) -20°C / +80°C Grade of protection IP 67 Oil type 708L Weight including arm(kg) 19 Frequency of use Semi-intensive   Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm, fixing bracket, two keys to access the release device. With gate leaves wider than 2 m it is required that an electric lock be fitted on to the gate.  

FADINI KIT BART 350 | Swing Gate Operator Kit | 300 kg, 2.3 m

Product Overview The FADINI KIT BART 350 is a comprehensive kit designed for automating swinging gates with leaves weighing up to 300 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 300 kg in weight and 2.3 m in length 24 Vdc geared motor operators for robust performance Master and slave control units for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT BART 350 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc geared motor operators, one master (F/351L) with the ELPRO 35M control unit and one slave (F/352L) with the ELPRO 35S control board, providing secure and synchronized operation of your gates. The included ZERO.PH surface mount photocells (F/140L) enhance safety by detecting obstacles and preventing accidents during gate movement. For remote operation, the kit features two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. Kit Contents for F/3520K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/3521K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI TALOS 94 / TALOS 96 | Automatic Bollards for Traffic Control

Product Overview The FADINI TALOS 94 and TALOS 96 automatic bollards are designed for effective traffic control in various settings, including residential, commercial, industrial, and urban areas. These fully retractable bollards are built to handle a high number of operations daily, ensuring reliable performance and enhanced security. Key Features Hydraulic locking device in standing position Emergency manual lowering with supplied release spanner Optional solenoid valve for automatic lowering during power failures Obstacle detection to prevent rising when an obstacle is detected Heating device for cold climates (down to -40°C) Scratch-proof and corrosion-resistant construction Integrated LED lights for enhanced visibility Available in various heights and materials High Resistance Cylinder (HRC) models for greater breakout resistance Product Description TALOS 94 The FADINI TALOS 94 automatic bollard is recommended for controlling access in residential and commercial areas. It features a hydraulic locking device, obstacle detection, and a manual emergency lowering system. The bollard's components, including the motor pump and oil-hydraulic actuator, are housed within the bollard for easy maintenance and protection against rust and other environmental factors. The TALOS 94 is available in various configurations, with options for stainless steel or HRC cylinders for enhanced resistance. The bollard is equipped with hall effect limit switch sensors, a rubber-edged cylinder head, and integrated LED lights for improved safety and visibility. TALOS 96 The FADINI TALOS 96 automatic bollard is designed for locations requiring high breakout resistance, such as commercial centers and banks. It offers the same features as the TALOS 94 but with additional armoured security. The TALOS 96 is constructed to withstand heavy-duty usage and provides maximum security with its high resistance to impacts and breakouts. This model also features hydraulic locking, emergency manual lowering, and easy access to the hydraulic components for maintenance. The TALOS 96 is available in various configurations with HRC cylinders for superior breakout resistance. Specifications SpecificationTALOS 94 SeriesTALOS 96 Series Cylinder diameter (mm) 275 275 Cylinder thickness (mm) 4 12 Cylinder height from ground (mm) 500/600/700/800 500/600/700/800 Cylinder material Stainless steel AISI 304 / AISI 316 / RAL 1028 S355J2H steel Cylinder treatment and finishing Brushed Cataphoresis and polyester powder coating RAL 7016 Pit Hot dip galvanization Hot dip galvanization Working temperature (°C) -20 ÷ +80 (-40 with heater) -20 ÷ +80 (-40 with heater) Oil type 708L 708L Power supply (Vac – Hz) 230 - 50 230 - 50 Absorbed power (W) 1.100 1.100 Absorbed current (A) 1,8 ÷ 3,5 1.8 Power yield (kW / HP) 0,25 / 0,33 0,25 / 0,33 Grade of protection IP/motor-pump 67 67 Frequency of use (cycles/day) Heavy duty / 2.000 Heavy duty / 2.000 Impact resistance (J) 52.000 | 70.000 - HRC 60.000 | 90.000 - HRC Breakout resistance (J) 320.000 | 420.000 - HRC 450.000 | 550.000 - HRC Maximum static load (kg) 20.000 20.000 Overall Measurements (mm)   HeightConstrainth 500 200 830 500 400 1.010 600 200 1.010 600 400 1.210

Fadini BAYT 980 Automatic Barrier with Variable Options

Fadini BAYT 980 Barrier Oil-hydraulic road barrier with beams from 3m up to 8m depending on speed (faster means smaller beam). OIL-HYDRAULIC SAFETY 230 Vac oil-hydraulic operator, motor-pump and piston integrated in the assembly. Ideal for those installations where heavy duty specifications are to meet: car parks, private and public driveways, residential, urban and industrial areas. Various speed options, slowdown on opening and closing. ROBUST Reinforced structure made of powder coated steel to ensure a greater resistance to weathering or AISI 304 brushed stainless steel. Anodized aluminium beams with oval section, available in various lengths and coming with an aluminium expanding joint; high strength against winds. VERSATILE Wide range of accessories: beam with a fence underneath, beam with incorporated LED lights highly visible in dark conditions (flashing option as traffic lights on request), folding device for roofed applications, swing-away arm fastening plate preventing breakage in case of vehicle collision. QUICK INSTALLATION The electronic control board is located in the upper part of the housing in a dedicated and separated box. “master/slave” option available on request for opposing barriers. HANDY A version of this model can be fully operated by hands (max. beam length 6,40 m without fence). Ideal for places where no electric power supply is available. SPECIFICATIONS Power Supply 230V AC - 50Hz Absorbed power 510 W Absorbed current 2.4 A Power output 0,37 kW (0,5 HP) Working temperature - 20°C +80 °C Working pressure 20 atm Maximum pressure 40 atm Protection standards IP 67 Oil type FADINI oil Oil reservoir volume 2.5 litres Colour Variable - choose in options (Stainless Steel or Orange) Frequency of use very intensive   PRODUCT INCLUDES AND ADDITIONAL INFORMATION AISI 304 STAINLESS STEEL RAL 2002 / 9006 SW3061 Housing cabinet with door Two keys Motor-pump-piston assembly COS 982 Electronic control board ELPRO 980 Voltage cut-off switch Power supply and ground cables Flanged fastening plate to hold the aluminium beam  Stainless steel anchoring base plate with rag bolts and nuts Zinc-coated anchoring base plate with rag bolts and nuts    Blue LED light incorporated into the housing  The barrier body, top cover and door are AISI 304 brushed stainless steel. The barrier body is cataphoresis treated and polyester powder coated in two colours, body in RAL 2002 orange red, while top cover and door are 9006 SW3061 textured grey.   Beam and accessories (folding and fixed pedestals, etc.) not included; consult the specific section in the catalogue.      PRODUCT CODE LIST RAL VERSION CODE (click to see) STAINLESS STEEL CODE (click to see) VERSION SPEED (s) PISTON PUMP BEAM LIMIT (m) access width [ ] FENCE REINFORCEMENT BEAM CABLES KIT COUNTERWEIGHTS (10 kg each) F/9801DXL F/9811DXL right-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9801SXL F/9811SXL left-handed 3 ø 30 P16 3,20 [2,85] - - - - F/9802DXL F/9812DXL right-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9802SXL F/9812SXL left-handed  4 ø 40  P16  3,20 [2,85] - - - - 4,20 [3,85] - - - - F/9803DXL F/9813DXL right-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9803SXL F/9813SXL left-handed   8 ø 40   P8   4,20 [3,85] APPLICABLE - - - 5,30 [4,95] - - - - 6,40 [6,05] - - - - F/9804DXL F/9814DXL right-handed    14  ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9804SXL F/9814SXL left-handed    14 ø 50    P6    4,20 [3,85] APPLICABLE - - - 5,30 [4,95] APPLICABLE - - - 6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L F/9805DXL F/9815DXL right-handed     19 ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L F/9805SXL F/9815SXL left-handed     19  ø 60     P6     6,40 [6,05] APPLICABLE APPLICABLE - 4x F/1965L 7,40 [7,05] - APPLICABLE 1x F/1958L 3x F/1962L 7,40 [7,05] APPLICABLE APPLICABLE 1x F/1958L 6x F/1968L 8,50 [8,15] - APPLICABLE 1x F/1967L 7x F/1969L 8,50 [8,15] APPLICABLE APPLICABLE 1x F/1967L 9x F/1970L

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops