NICE BiDi-Shutter | Interior Bidirectional Interface for Tubular Motors

 Product Overview The BiDi-Shutter is an advanced bidirectional interface designed for integrating mechanical tubular motors of interior shutters and outdoor awnings into your smart home system. This interface allows for individual, group, or scenario control of connected motors, providing real-time feedback on automation status and efficient energy management to reduce waste. The BiDi-Shutter enhances comfort by protecting indoor environments from excessive sunlight and reducing the need for air conditioning. Key Features Control connected motors individually, in groups, or in scenarios Receive real-time feedback on automation status Manage electrical loads and reduce energy waste Voice control via Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment using Yubii or MyNice apps Enhance indoor comfort by protecting against heat and reducing air conditioning use Fast programming of limit switches and continuous automatic calibration Set two intermediate opening positions based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors No gateway required for controlling Venetian blinds, rolling shutters, and awnings Each bidirectional product acts as a radio signal repeater to extend signal coverage Product Description Smart Home Integration BiDi-Shutter allows seamless integration of tubular motors into your smart home system, enabling comprehensive control and management. You can control the connected motors using voice commands through Amazon Alexa, Google Home, or Siri Shortcuts. Additionally, the Yubii and MyNice apps provide remote management capabilities via your smartphone, smartwatch, or car infotainment system. Energy Efficiency and Comfort By managing electrical loads and controlling consumption, BiDi-Shutter helps reduce energy waste. It also protects your indoor environment from excessive heat, making the climate more comfortable and minimizing the need for air conditioning. This contributes to energy savings and enhances overall comfort. Easy Programming and Compatibility Programming the limit switches is fast and straightforward, requiring just two complete maneuvers. The system ensures continuous automatic calibration during operation. You can set two intermediate opening positions based on sun sensor settings, allowing for optimal sunlight control. BiDi-Shutter is compatible with both unidirectional and bidirectional remote controls and climate sensors, offering flexibility in control options. Reliable and Efficient Each bidirectional product in the BiDi-Shutter system acts as a radio signal repeater, extending signal coverage and ensuring reliable operation. This makes the system efficient and effective in controlling various types of window coverings, including Venetian blinds, rolling shutters, and awnings, without the need for a separate gateway. Usage Instructions Install the BiDi-Shutter interface according to the provided manual. Pair the interface with your smart home system and configure the settings using the Yubii or MyNice apps. Set the desired opening positions and control the tubular motors using voice commands or remote controls. Regularly check the system for updates and ensure all components are functioning correctly. Dimensions Compact and designed for easy installation, the BiDi-Shutter interface fits seamlessly into your existing smart home setup. Safety and Maintenance Ensure the BiDi-Shutter interface is installed in a suitable location, protected from moisture and excessive heat. Regularly check for firmware updates to maintain optimal performance. Keep the interface and connected devices clean and free from obstructions.

NICE SPY800KCE Kit for Sectional and Up-and-Over Door Automation, 800 N

Product Overview The SPY800KCE kit is designed for automating sectional doors up to 12.5 sqm and up-and-over doors up to 14 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY800: SPY800 Gearmotor, 800 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 800 N Max Sectional Door Size: 12.5 sqm Max Up-and-Over Door Size: 14 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 800 N Max Sectional Door Size 12.5 sqm Max Up-and-Over Door Size 14 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY800KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 12.5 sqm and 14 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY650KCE Kit for Sectional and Up-and-Over Door Automation, 650 N

Product Overview The SPY650KCE kit is designed for automating sectional doors up to 10.5 sqm and up-and-over doors up to 11.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY650: SPY650 Gearmotor, 650 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 650 N Max Sectional Door Size: 10.5 sqm Max Up-and-Over Door Size: 11.5 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 650 N Max Sectional Door Size 10.5 sqm Max Up-and-Over Door Size 11.5 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY650KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 10.5 sqm and 11.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY550KCE Kit for Sectional and Up-and-Over Door Automation, 550 N

Product Overview The SPY550KCE kit is designed for automating sectional doors up to 9 sqm and up-and-over doors up to 10.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY550: SPY550 Gearmotor, 550 N 1 x SPYBOX: Control unit with built-in LED courtesy light and receiver 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 550 N Max Sectional Door Size: 9 sqm Max Up-and-Over Door Size: 10.5 sqm Control Unit: Built-in with LED courtesy light and receiver Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 550 N Max Sectional Door Size 9 sqm Max Up-and-Over Door Size 10.5 sqm Control Unit Built-in with LED courtesy light and receiver Transmitter Frequency 433.92 MHz Benefits: The SPY550KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 9 sqm and 10.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light and receiver facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE Naked Sliding 400 NKSL400 Sliding Gate Motor with Built-in Control Unit and Absolute Encoder

Product Overview The NKSL400 is a concealed sliding gate motor designed for gates weighing up to 400 kg and with a leaf length of up to 6 meters. This 24 Vdc irreversible motor features a built-in control unit and absolute encoder, allowing for seamless integration in the gate post. Key Features Gate Type: Sliding gate Max Length per Gate: 6000mm Motor Voltage: 24V Max Weight per Gate: 400kg Locking Method: Mechanically locking motor Gate Speed: 20 m/min Duty Cycle: Semi-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Length per Gate 6000mm Motor Voltage 24V Max Weight per Gate 400kg Locking Method Mechanically locking motor Gate Speed 20 m/min Duty Cycle Semi-intensive Mains Power Supply 230V Benefits The NKSL400 sliding gate motor provides efficient and reliable automation for residential and commercial sliding gates. Its 24 Vdc motor with a built-in control unit and absolute encoder ensures precise and safe operation. The concealed design allows for seamless integration within the gate post, offering a clean and unobtrusive installation. Installation and Setup The NKSL400 is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit and absolute encoder simplify setup, making it suitable for a variety of applications. Compatibility and Accessories The NKSL400 is compatible with various gate automation systems and accessories. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality and safety.

NICE RUN2500I 230 Vac Sliding Gate Motor with Built-in Control Unit and Inverter

Product Overview The RUN2500I is a robust sliding gate motor designed for gates weighing up to 2500 kg. This 230 Vac irreversible motor is equipped with a built-in control unit and inverter, along with electromechanical limit switches, ensuring reliable and efficient operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 2500kg Motor Voltage: 230V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 15 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 2500kg Motor Voltage 230V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 15 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN2500I sliding gate motor provides powerful and efficient automation for heavy-duty gates. The 230 Vac motor ensures consistent performance, while the built-in control unit with inverter enhances safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN2500I is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit and inverter simplify setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN2500I is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN2500P 230 Vac Sliding Gate Motor with Inductive Limit Switch

Product Overview The RUN2500P is an advanced sliding gate motor designed for gates weighing up to 2500 kg. This 230 Vac irreversible motor comes with a built-in control unit and an inductive limit switch, ensuring reliable and efficient operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 2500kg Motor Voltage: 230V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 10 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 2500kg Motor Voltage 230V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 10 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN2500P sliding gate motor provides robust and efficient automation for heavy-duty gates. The 230 Vac motor ensures reliable performance, while the built-in control unit and inductive limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN2500P is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN2500P is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN2500 230 Vac Sliding Gate Motor with Electromechanical Limit Switch

Product Overview The RUN2500 is an advanced sliding gate motor designed for gates weighing up to 2500 kg. This 230 Vac irreversible motor comes with a built-in control unit and an electromechanical limit switch, ensuring reliable and efficient operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 2500kg Motor Voltage: 230V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 10 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 2500kg Motor Voltage 230V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 10 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN2500 sliding gate motor provides robust and efficient automation for heavy-duty gates. The 230 Vac motor ensures reliable performance, while the built-in control unit and electromechanical limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN2500 is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN2500 is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN1800P 230 Vac Sliding Gate Motor with Inductive Limit Switch

Product Overview The RUN1800P is an advanced sliding gate motor designed for gates weighing up to 1800 kg. This 230 Vac irreversible motor comes with a built-in control unit and an inductive limit switch, ensuring reliable and efficient operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 1800kg Motor Voltage: 230V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 10 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 1800kg Motor Voltage 230V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 10 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN1800P sliding gate motor provides robust and efficient automation for heavy-duty gates. The 230 Vac motor ensures reliable performance, while the built-in control unit and inductive limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN1800P is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN1800P is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN1800 230 Vac Sliding Gate Motor with Built-in Control Unit

Product Overview The RUN1800 is an advanced sliding gate motor designed for gates weighing up to 1800 kg. This 230 Vac irreversible motor comes with a built-in control unit and an electromechanical limit switch, ensuring reliable and efficient operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 1800kg Motor Voltage: 230V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 10 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 1800kg Motor Voltage 230V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 10 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN1800 sliding gate motor provides robust and efficient automation for heavy-duty gates. The 230 Vac motor ensures reliable performance, while the built-in control unit and electromechanical limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN1800 is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN1800 is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN1500P | 24 Vdc Sliding Gate Motor with Built-in Control Unit

Product Overview The RUN1500P is an advanced sliding gate motor designed for gates weighing up to 1500 kg. This 24 Vdc irreversible motor comes with a built-in control unit and an inductive limit switch, ensuring efficient and reliable operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 1500kg Motor Voltage: 24V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 15 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 1500kg Motor Voltage 24V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 15 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN1500P sliding gate motor provides robust and efficient automation for heavy-duty gates. The 24 Vdc motor ensures reliable performance, while the built-in control unit and inductive limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN1500P is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN1500P is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE RUN1500 | 24 Vdc Sliding Gate Motor with Built-in Control Unit

Product Overview The RUN1500 is an advanced sliding gate motor designed for gates weighing up to 1500 kg. This 24 Vdc irreversible motor comes with a built-in control unit and an electromechanical limit switch, ensuring efficient and reliable operation for very-intensive use. Key Features Gate Type: Sliding gate Max Weight per Gate: 1500kg Motor Voltage: 24V Locking Method: Mechanically locking motor Protection Rating: IP44 Gate Speed: 15 m/min Duty Cycle: Very-intensive Mains Power Supply: 230V Specifications SpecificationDetails Gate Type Sliding gate Max Weight per Gate 1500kg Motor Voltage 24V Locking Method Mechanically locking motor Protection Rating IP44 Gate Speed 15 m/min Duty Cycle Very-intensive Mains Power Supply 230V Benefits The RUN1500 sliding gate motor provides robust and efficient automation for heavy-duty gates. The 24 Vdc motor ensures reliable performance, while the built-in control unit and electromechanical limit switch enhance safety and precision. Its IP44 protection rating makes it suitable for various weather conditions. Installation and Setup The RUN1500 is designed for easy installation with detailed instructions provided in the manual. Follow safety guidelines for optimal performance and longevity. The motor's built-in control unit simplifies setup, making it suitable for both residential and commercial applications. Compatibility and Accessories The RUN1500 is compatible with Nice BlueBUS technology, allowing for seamless integration with other Nice automation products. Consider additional accessories such as remote controls, safety photocells, and loop detectors for enhanced functionality.

NICE M-FAB MFABBOXI Stainless Steel Foundation Box for Swing Gates

Product Overview The M-FAB MFABBOXI is a durable and reliable foundation box designed for swing gates with leaves up to 3.5 meters. This foundation box ensures a robust and secure underground installation for your gate system. Key Features Max Gate Length: Suitable for swing gates with leaves up to 3.5 meters Installation Type: Underground installation for a seamless and clean look Material: High-quality stainless steel for maximum durability Mechanical Stop: Integrated mechanical stop on opening for precise control Compatibility: Designed for use with Nice M-Fab Swing Gate Operators Specifications SpecificationDetails Max Gate Length 3.5 meters Installation Type Underground Material Stainless Steel Mechanical Stop On Opening Compatibility Nice M-Fab Swing Gate Operators Benefits The M-FAB MFABBOXI foundation box provides a sturdy and long-lasting solution for your swing gate system. Its stainless steel construction ensures resistance to environmental elements, while the mechanical stop feature allows for precise and controlled gate movements. Installation and Setup Installing the M-FAB MFABBOXI foundation box is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

Nice SPINKIT SPIN11KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN11KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3m pre-assembled guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Pre-assembled 3-metre guide for easy installation Product Description The SPINKIT SPIN11KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-assembled 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN11KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section.

Nice SPINKIT SPIN10KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN10KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3x1 m-sections linear guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINKIT SPIN10KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of three 1-metre guide sections provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN10KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections.

Nice SPIN23KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN23KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN23KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN23KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section.

Nice SPIN22KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN22KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Two guide sections: one 3-metre and one 1-metre, both 35mm thick, for flexible installation Product Description The SPIN22KCE is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of both a 3-metre and a 1-metre guide section provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN22KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section.

Nice SPIN21KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN21KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in SNA2 control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN21KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in SNA2 control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN21KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section.

Nice SPINBUSKIT20 | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINBUSKIT20 (SPIN20KCE) is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINBUSKIT20 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINBUSKIT20 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section.

Nice ROBUSKIT 600 | Sliding Gate Motor Kit | For Gates up to 600kg

Product Overview The ROBUSKIT 600 (RB600KCE) is a comprehensive automation kit for sliding gates weighing up to 600 kg. Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for gate automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc irreversible motor with incorporated control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Aluminium release handle for easy manual opening Protected compartment for control unit and buffer batteries Product Description The ROBUSKIT 600 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete gate automation system: 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver for Nice BlueBUS connections. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard. Specifications SpecificationDetails Gate Type Sliding Gate Motor Voltage 24V DC Max Weight per Gate 600 kg Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Gate Speed 16 m/min Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The ROBUSKIT 600 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sliding gates in different environments. Included in the Box 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard.

NICE Heating Element PW1 | For Automation Systems

Product Overview The PW1 Heating Element is designed to maintain a suitable temperature for automation systems, ensuring correct operation even under severe weather conditions. Each element has a consumption of 20W and is highly efficient thanks to the silicone sheath that covers the resistance and enhances heat diffusion. Key Features Maintains suitable temperature for automation systems Consumes 20W per element Silicone sheath for increased heat diffusion Directly fed by 230/120 Vac power supply through the TW1 thermostat Ensures correct operation under severe weather conditions Product Description Heating Element PW1 for Automation Systems The PW1 Heating Element is an essential component for maintaining the optimal temperature of your automation system. This element ensures that the system operates correctly even in extreme weather conditions, providing reliable performance and efficiency. Efficient and Reliable Each heating element consumes only 20W, making it an energy-efficient solution. The silicone sheath covering the resistance not only protects the element but also enhances the diffusion of heat, ensuring that the system remains at a suitable temperature for optimal operation. Easy Integration The PW1 Heating Element is directly powered by a 230/120 Vac power supply through the TW1 thermostat, ensuring seamless integration into your existing automation system. This setup provides precise temperature control, helping to maintain consistent performance regardless of external weather conditions. With its reliable performance and efficient design, the PW1 Heating Element is a crucial addition to any automation system requiring temperature regulation to function correctly in all weather conditions.

NICE Angular Extension for Measurements NSEA from 1.25 to 2.50m - Impact Force Measurement

Angular extension for measurements from 1.25 to 2.50m, applicable on NSEL.

NICE Solemyo SYKCE | Solar Power Kit with SYP Photovoltaic Panel and PSY24 Battery

Product Overview The Solemyo SYKCE Solar Power Kit is a comprehensive solution designed to automate gates, garage doors, and road barriers using solar power. This kit includes the SYP photovoltaic panel and the PSY24 battery box with a charging control circuit, providing a reliable and eco-friendly power source for your automation systems. Key Features Complete solar power kit for automation systems Includes SYP photovoltaic panel for 24V supply PSY24 battery box with control circuit and carry handles Contains all necessary cables and connectors Ideal for gates, garage doors, and road barriers Eco-friendly and sustainable power solution Product Description Solemyo SYKCE Solar Power Kit - SYP Photovoltaic Panel and PSY24 Battery The Solemyo SYKCE Solar Power Kit offers a sustainable and efficient way to automate gates, garage doors, and road barriers. This kit includes the SYP photovoltaic panel, which provides a 24V power supply, and the PSY24 battery box equipped with a charging control circuit. Together, they create a reliable solar power system for your automation needs. Components Included SYP Photovoltaic Panel: A high-efficiency panel that generates a 24V power supply, harnessing solar energy to power your automation systems. PSY24 Battery Box: A 24V battery box with an integrated control circuit and convenient carry handles, ensuring easy transport and installation. The control circuit manages the charging process, optimizing the battery life and performance. Cables and Connectors: The kit includes all necessary cables and connectors to ensure a seamless connection between the photovoltaic panel and the battery box, as well as to the automation systems. Eco-Friendly Automation The Solemyo SYKCE Solar Power Kit provides an eco-friendly alternative to traditional power sources. By utilizing solar energy, this kit helps reduce carbon emissions and energy costs, promoting a sustainable approach to automation. Applications Ideal for a variety of applications, the SYKCE kit is perfect for automating gates, garage doors, and road barriers. It ensures that your automation systems operate smoothly and efficiently, even in locations without access to conventional power sources.

NICE Bi-Di-Awning | Exterior Bidirectional Interface for Tubular Motor

Product Overview The Bi-Di-Awning is an exterior bidirectional interface designed for tubular motors of outdoor awnings. It enables seamless integration of mechanical tubular motors into smart home systems, offering individual, group, or scenario control. The interface provides feedback on automation status, helps manage electrical loads, and reduces energy waste. The Bi-Di-Awning is compatible with voice commands via Amazon Alexa, Google Home, and Siri Shortcuts, and can be managed remotely through the Yubii or MyNice apps. Key Features Exterior bidirectional interface for tubular motors Control connected motors individually, in groups, or in scenarios Receive feedback on automation status Manage electrical loads to reduce energy waste Compatible with Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment Protect indoor environments from the heat of the sun Fast programming of limit switches from the transmitter Set two intermediate opening positions Program partial opening based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors Control Venetian blinds, rolling shutters, and awnings without a gateway Acts as a radio signal repeater to extend coverage Product Description Bi-Di-Awning Exterior Bidirectional Interface for Tubular Motors The Bi-Di-Awning interface integrates mechanical tubular motors of outdoor awnings into your smart home system, allowing for comprehensive control and management. Whether you need to control the motors individually, in groups, or as part of a scenario, the Bi-Di-Awning provides the flexibility and functionality you need. Smart Home Compatibility Enjoy the convenience of controlling your awnings through voice commands with Amazon Alexa, Google Home, and Siri Shortcuts. Manage your devices remotely using the Yubii or MyNice apps on your smartphone, smartwatch, or car infotainment system. Efficient Energy Management The Bi-Di-Awning helps reduce energy waste by controlling consumption and managing electrical loads effectively. Protect your indoor environment from the heat of the sun, making your climate more comfortable and cutting back on air conditioning use. Advanced Programming and Compatibility The interface allows for fast programming of limit switches directly from the transmitter by performing two complete manoeuvres, ensuring continuous automatic calibration. You can set two intermediate opening positions and program partial openings based on sun sensor settings. The Bi-Di-Awning is compatible with both unidirectional and bidirectional remote controls and climate sensors, making it a versatile solution for controlling Venetian blinds, rolling shutters, and awnings without the need for a gateway. Enhanced Signal Coverage Each bidirectional product acts as a radio signal repeater, extending the signal coverage and ensuring reliable communication across your system.

NICE TT2D Mindy Control Unit | Management of 230 Vac Lighting Systems

Product Overview The TT2D Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and switching module, making it a versatile solution for efficiently controlling your lighting systems. This unit is compatible with a wide range of Nice transmitters, ensuring seamless integration and reliable performance. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver and switching module Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2D Mindy Control Unit for 230 Vac Lighting Systems The TT2D Mindy Control Unit is an advanced solution for managing 230 Vac lighting systems. This miniaturised unit includes a built-in radio receiver and switching module, providing comprehensive control over your lighting setup. Its compatibility with various Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo, ensures that you can easily integrate it into your existing system. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, offering ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2D Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2D Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.

NICE TT2L Mindy Control Unit | Management of 230 Vac Lighting Systems

Product Overview The TT2L Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and is compatible with a variety of Nice transmitters, making it a versatile solution for controlling your lighting systems efficiently and reliably. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2L Mindy Control Unit for 230 Vac Lighting Systems The TT2L Mindy Control Unit is an advanced, miniaturised solution for managing 230 Vac lighting systems. It comes with a built-in radio receiver, allowing it to communicate seamlessly with a wide range of Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo. This compatibility ensures that you can integrate the TT2L control unit into your existing system with ease. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, providing ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2L Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2L Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.

NICE OBOX2 | Multi-Purpose Interface with USB Connection

Product Overview The OBOX2 is a multi-purpose interface designed to facilitate the configuration and programming of devices at 433.92 MHz and 868.46 MHz. This interface comes complete with the O-Box Software Suite and a USB connection cable, enabling easy connection to your PC or PDA for direct programming and management. Key Features Multi-purpose interface with USB connection Compatible with devices at 433.92 MHz and 868.46 MHz Complete with O-Box Software Suite Enables configuration and programming from PC or PDA Includes USB connection cable Product Description OBOX2 Multi-Purpose Interface with USB Connection The OBOX2 is a versatile and essential tool for configuring and programming devices operating on the 433.92 MHz and 868.46 MHz frequencies. This interface is designed to work seamlessly with the O-Box Software Suite, allowing for easy and efficient management of your devices directly from your PC or PDA. Dual Band Compatibility The OBOX2 supports dual band frequencies, making it compatible with devices operating at both 433.92 MHz and 868.46 MHz. This broad compatibility ensures that you can manage a wide range of devices using a single interface. Complete Software Solution The included O-Box Software Suite provides a comprehensive solution for configuring and programming your devices. With this software, you can easily set up, modify, and manage your devices' settings and operations. Easy Connectivity The OBOX2 interface comes with a USB connection cable, allowing for straightforward and reliable connectivity to your PC or PDA. This ensures that you can quickly and easily connect the interface to your devices for programming and configuration. The OBOX2 multi-purpose interface is an invaluable tool for any setup requiring precise and efficient device management. With its dual band compatibility, comprehensive software suite, and easy connectivity, the OBOX2 provides all the functionality you need to manage your devices effectively.

NICE O-View OVBT GSM Module for O-View and Software Suite

Product Overview The O-View OVBT GSM Module is designed for use with the O-View and O-View Software Suite, allowing for control, programming, and diagnostics of devices equipped with a BUS T4 connection. This module enables seamless connectivity with your PDA, smartphone, or PC, offering both on-site and remote management via GPRS. Key Features GSM module for O-View and O-View Software Suite Enables control, programming, and diagnostics Compatible with PDA, smartphone, and PC Works with devices equipped with BUS T4 connection Allows remote management via GPRS Product Description O-View OVBT GSM Module for O-View and Software Suite The O-View OVBT GSM Module is an essential accessory for enhancing the functionality of your O-View and O-View Software Suite. This module provides a versatile solution for controlling, programming, and diagnosing devices with a BUS T4 connection. By connecting to your PDA, smartphone, or PC, you can manage your systems efficiently, either on-site or remotely via GPRS. Enhanced Connectivity and Control The OVBT GSM module offers robust connectivity, enabling seamless integration with your O-View and O-View Software Suite. This allows for convenient control and management of your automation systems using a variety of devices, including PDAs, smartphones, and PCs. Remote Management Capability One of the standout features of the O-View OVBT GSM module is its ability to facilitate remote management via GPRS. This ensures you can perform diagnostics and make adjustments to your systems from virtually anywhere, providing flexibility and peace of mind. Comprehensive Programming and Diagnostics The OVBT GSM module supports comprehensive programming and diagnostics for devices equipped with a BUS T4 connection. This functionality ensures that you can maintain optimal performance and quickly address any issues that may arise, enhancing the reliability and efficiency of your automation systems.

NICE O-View OVBT Bluetooth Module for O-View and Software

Product Overview The O-View OVBT Bluetooth Module is designed for use with the O-View and O-View Suite, allowing for control, programming, and diagnostics of devices equipped with a BUS T4 connection. This module enables seamless connectivity with your PDA, smartphone, or PC, offering both on-site and remote management via GPRS. Key Features Bluetooth module for O-View and O-View Suite Enables control, programming, and diagnostics Compatible with PDA, smartphone, and PC Works with devices equipped with BUS T4 connection Allows remote management via GPRS Product Description O-View OVBT Bluetooth Module for O-View and Software The O-View OVBT Bluetooth Module is an essential accessory for enhancing the functionality of your O-View and O-View Suite. This module provides a versatile solution for controlling, programming, and diagnosing devices with a BUS T4 connection. By connecting to your PDA, smartphone, or PC, you can manage your systems efficiently, either on-site or remotely via GPRS. Enhanced Connectivity and Control The OVBT module offers robust Bluetooth connectivity, enabling seamless integration with your O-View and O-View Suite. This allows for convenient control and management of your automation systems using a variety of devices, including PDAs, smartphones, and PCs. Remote Management Capability One of the standout features of the O-View OVBT module is its ability to facilitate remote management via GPRS. This ensures you can perform diagnostics and make adjustments to your systems from virtually anywhere, providing flexibility and peace of mind. Comprehensive Programming and Diagnostics The OVBT module supports comprehensive programming and diagnostics for devices equipped with a BUS T4 connection. This functionality ensures that you can maintain optimal performance and quickly address any issues that may arise, enhancing the reliability and efficiency of your automation systems.

Niceway OX4T | Pre-Wired 4 Channel Receiver with Built-In Transmitter

Product Overview The Niceway OX4T is a pre-wired universal 4 channel receiver with a built-in transmitter, operating on the 433.92 MHz frequency. This versatile receiver allows you to integrate Nice remote controls into automation systems from other brands or manufacturers. The OX4T features 4 voltage-free contact relays, making it compatible with any type of control unit. Key Features Universal receiver with built-in transmitter Operates on 433.92 MHz frequency 4 channels Part of the NiceOne series of radio receivers Compatible with Nice Opera system Supports various Nice radio encoding formats: O-Code, FloR, TTS, Smilo, Flo (rolling code) 4 voltage-free contact relays Product Description Niceway OX4T Pre-Wired 4 Channel Receiver with Built-In Transmitter The Niceway OX4T receiver is a universal solution for integrating Nice remote controls into diverse automation systems. With its built-in transmitter and 4 channels, the OX4T operates on the 433.92 MHz frequency, ensuring robust and reliable performance. As part of the NiceOne series and Nice Opera system, this receiver offers advanced functionality and compatibility. Universal Compatibility The OX4T receiver is designed to work with any type of control unit, thanks to its 4 voltage-free contact relays. This universal compatibility makes it an ideal choice for integrating Nice remote controls into automation systems from various brands or manufacturers. Advanced Radio Encoding The OX4T supports multiple Nice radio encoding formats, including O-Code, FloR, TTS, Smilo, and Flo (rolling code). This ensures seamless communication and integration with Nice remote controls, providing flexible and reliable control options. Easy Installation and Integration The pre-wired design of the OX4T receiver simplifies installation, allowing for quick and easy integration into your existing control systems. Whether you need to enhance an existing setup or create a new one, the OX4T offers a user-friendly and efficient solution.

Niceway OX2 | Pre-Wired Universal Receiver, 2 Channels, 433.92 MHz

Product Overview The Niceway OX2 is a pre-wired, universal 2 channel receiver operating on the 433.92 MHz frequency. Designed without a built-in transmitter, this receiver is part of the NiceOne series and can be used with any type of control unit. It operates using 2 voltage-free contact relays, making it suitable for automation systems such as gates, garage doors, and road barriers. Key Features Universal, pre-wired receiver with 6-core cable 2 channel receiver without built-in transmitter Works on 433.92 MHz frequency Can memorize up to 1024 remote controls Part of the Nice Opera system Communicates using Nice O-Code radio encoding system Compatible with FloR, TTS, Smilo, and Flo encoding systems* *Some exclusive NiceOpera system functions cannot be used with these encoding systems. Product Description Niceway OX2 Pre-Wired Universal 2 Channel Receiver The Niceway OX2 is a versatile and reliable receiver designed to integrate seamlessly with various control units. It features a pre-wired 6-core cable for easy connection and operates on a 433.92 MHz frequency. As part of the NiceOne series, the OX2 receiver is ideal for use in automation systems including gates, garage doors, and road barriers. Compatibility and Encoding This receiver is compatible with the Nice Opera system and communicates using the Nice O-Code radio encoding system. It also supports FloR, TTS, Smilo, and Flo encoding systems, although some exclusive NiceOpera system functions may not be available with these encoding systems. High Capacity and Easy Programming The OX2 receiver can memorize up to 1024 remote controls, making it suitable for large installations. Programming your remote controls is straightforward, ensuring quick and efficient setup. How Does It Work? The Niceway OX2 receiver operates using 2 voltage-free contact relays, allowing it to be used with any type of control unit. To install, simply connect the 6-core cable to your control unit as per the product manual and program your remote controls.

Niceway OXI Receiver | 4 Channels, 433.92 MHz, Without Built-In Transmitter

Product Overview The Niceway OXI Receiver is a 4-channel, 433.92 MHz receiver designed for use with Nice control boards that have SM ports. This receiver does not include a built-in transmitter but comes with advanced opera system functions, providing user-friendly programming and management tools for efficient control and operation. Key Features 4-channel receiver Operates on 433.92 MHz frequency Compatible with Nice control units with SM ports Handles up to 1024 transmitters/users User-friendly programming and management tools Printable log of codes Three levels of password protection Plug-in type with connector Product Description Niceway OXI Receiver - 4 Channels, 433.92 MHz The Niceway OXI Receiver is an advanced 4-channel receiver operating on the 433.92 MHz frequency, designed without a built-in transmitter. It is compatible with Nice control boards equipped with SM ports, making it a versatile addition to your control system. The receiver features opera system functions that enhance user experience with easy programming and management tools. Advanced Functionality and Security This receiver can handle up to 1024 transmitters/users, making it suitable for large installations. It offers user-friendly programming and management tools, along with a printable log of codes for easy record-keeping. The receiver also features three levels of password protection, ensuring secure access and operation. Easy Installation and Compatibility The Niceway OXI Receiver is a plug-in type radio receiver with a connector, ensuring easy installation. It is compatible with Nice control units with SM ports, providing a seamless integration into your existing control system.

Niceway OPLA | Squared Wall Plate Available in Various Colors

Product Overview The Niceway OPLA is a squared wall plate designed for use with Niceway transmitters. This wall plate is available in a variety of colors, providing a stylish and customizable solution for mounting your transmitter. The OPLA wall plate ensures a secure and neat installation, blending seamlessly with your interior decor. Available Colors White - WSW Black - WSB Aluminium - WSA Graphite - WSG Neutral Transparent - WST Seawater - WSS Key Features Squared wall plate for Niceway transmitters Available in six colors Stylish and customizable Secure and neat installation Blends seamlessly with interior decor Product Description Niceway OPLA Squared Wall Plate - Available in Various Colors The Niceway OPLA squared wall plate is an essential accessory for mounting Niceway transmitters. This wall plate is available in six distinct colors, allowing you to choose the one that best matches your interior design. The colors available are white (WSW), black (WSB), aluminium (WSA), graphite (WSG), neutral transparent (WST), and seawater (WSS). Color Options White: WSW Black: WSB Aluminium: WSA Graphite: WSG Neutral Transparent: WST Seawater: WSS The OPLA wall plate ensures a secure fit for your transmitter, maintaining a neat and organized appearance. Its durable construction and stylish design make it an excellent choice for enhancing the functionality and aesthetics of your control system setup.

NICE TENKIT TNLKCE | Irreversible Motor with Control Unit and Receiver for Doors up to 9m²

Product Overview The TENKIT TNLKCE is an irreversible 24 Vdc motor designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version features an incorporated control unit and receiver, a courtesy light, and a mechanical limit switch, ensuring reliable and efficient operation. Key Features Irreversible 24 Vdc motor Incorporated control unit and receiver Courtesy light for enhanced visibility Mechanical limit switch for precise operation Suitable for doors up to 9m² Compatible with projecting and non-projecting up-and-over doors Compatible with jointed doors Product Description TENKIT TNLKCE Irreversible Motor with Control Unit and Receiver The TENKIT TNLKCE motor is specifically designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version includes a 24 Vdc irreversible electromechanical gear motor with an incorporated control unit and plug-in receiver, a courtesy light, and a mechanical limit switch. The motor provides reliable performance and ease of use. Complete Kit for Easy Installation This comprehensive kit includes: 1 x TNKCE / TNLKCE irreversible electromechanical gear motor with control unit and plug-in receiver, courtesy light, and electromechanical limit switch 1 x TNA5 pair of standard telescopic arms 1 x TNA38 driving devices 1 x FLO2RE transmitter 433.92 MHz, 2 channels 1 x TS signboard Enhanced Features and Compatibility The TENKIT TNLKCE motor includes a courtesy light for improved visibility and safety. The mechanical limit switch ensures precise operation, making it suitable for various door types and applications. The motor is compatible with both projecting and non-projecting up-and-over doors, as well as jointed doors, providing versatile use.

NICE RONDO RN2040 | Motor with Brake and Release Device for Doors up to 180kg

Product Overview The RONDO RN2040 is an irreversible motor with a brake and release device, designed for balanced rolling doors up to 180kg. It features a smart design with a protective box for the limit switch unit and wiring, as well as a pre-wired capacitor for easy setup. The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with 48mm and 42mm adaptors, making it versatile and easy to install. Key Features Irreversible motor with brake and release device Suitable for balanced rolling doors up to 180kg Smart design with protective box for limit switch unit and wiring Pre-wired capacitor Easy and intuitive adjustment of limit switches Supplied with 200mm and 220mm flanges for 60mm shafts Includes 48mm and 42mm adaptors Easy installation with guided connector and three screws Recommended control units: Mindy A01 and A02 Product Description Irreversible Motor RONDO RN2040 with Brake and Release Device for Doors up to 180kg The RONDO RN2040 motor is specifically designed to handle balanced rolling doors up to 180kg. It features a brake and release device for enhanced control and safety. The smart design includes a protective box that houses the limit switch unit and wiring, ensuring durability and neatness. Additionally, the motor comes with a pre-wired capacitor, simplifying the installation process. Fast and Intuitive Adjustment One of the standout features of the RN2040 is the easy and intuitive adjustment of the limit switches during both opening and closing. This makes setup and adjustments quick and hassle-free. Complete Installation Kit The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with adaptors for 48mm and 42mm shafts, providing flexibility for various installations. The guided connector allows for easy installation without the need to hold the motor in place, and it can be secured with just three screws. Recommended Control Units The RONDO RN2040 is compatible with the Mindy A01 and A02 control units, ensuring seamless integration and reliable performance.

NICE RONDO RN2030 | Motor with Brake and Release Device for Doors up to 130kg

Product Overview The RONDO RN2030 is an irreversible motor with a brake and release device, designed for balanced rolling doors up to 130kg. It features a smart design with a protective box for the limit switch unit and wiring, as well as a pre-wired capacitor for easy setup. The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with 48mm and 42mm adaptors, making it versatile and easy to install. Key Features Irreversible motor with brake and release device Suitable for balanced rolling doors up to 130kg Smart design with protective box for limit switch unit and wiring Pre-wired capacitor Easy and intuitive adjustment of limit switches Supplied with 200mm and 220mm flanges for 60mm shafts Includes 48mm and 42mm adaptors Easy installation with guided connector and three screws Recommended control units: Mindy A01 and A02 Product Description Irreversible Motor RONDO RN2030 with Brake and Release Device for Doors up to 130kg The RONDO RN2030 motor is specifically designed to handle balanced rolling doors up to 130kg. It features a brake and release device for enhanced control and safety. The smart design includes a protective box that houses the limit switch unit and wiring, ensuring durability and neatness. Additionally, the motor comes with a pre-wired capacitor, simplifying the installation process. Fast and Intuitive Adjustment One of the standout features of the RN2030 is the easy and intuitive adjustment of the limit switches during both opening and closing. This makes setup and adjustments quick and hassle-free. Complete Installation Kit The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with adaptors for 48mm and 42mm shafts, providing flexibility for various installations. The guided connector allows for easy installation without the need to hold the motor in place, and it can be secured with just three screws. Recommended Control Units The RONDO RN2030 is compatible with the Mindy A01 and A02 control units, ensuring seamless integration and reliable performance.

NICE RONDO RN2020 | Reversible Motor for Doors up to 180kg

Product Overview The RONDO RN2020 is a reversible motor designed for balanced rolling doors up to 180kg. It features a smart design with a protective box for the limit switch unit and wiring, as well as a pre-wired capacitor for easy setup. The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with 48mm and 42mm adaptors, making it versatile and easy to install. Key Features Reversible motor without brake Suitable for balanced rolling doors up to 180kg Smart design with protective box for limit switch unit and wiring Pre-wired capacitor Easy and intuitive adjustment of limit switches Supplied with 200mm and 220mm flanges for 60mm shafts Includes 48mm and 42mm adaptors Easy installation with guided connector and three screws Recommended control units: Mindy A01 and A02 Product Description Reversible Motor RONDO RN2020 for Doors up to 180kg The RONDO RN2020 is an advanced reversible motor designed to handle balanced rolling doors up to 180kg with ease. This motor does not require a brake, making it a straightforward solution for many applications. The smart design includes a protective box that houses the limit switch unit and wiring, ensuring durability and neatness. Additionally, the motor comes with a pre-wired capacitor, simplifying the installation process. Fast and Intuitive Adjustment One of the standout features of the RN2020 is the easy and intuitive adjustment of the limit switches during both opening and closing. This makes setup and adjustments quick and hassle-free. Complete Installation Kit The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with adaptors for 48mm and 42mm shafts, providing flexibility for various installations. The guided connector allows for easy installation without the need to hold the motor in place, and it can be secured with just three screws. Recommended Control Units The RONDO RN2020 is compatible with the Mindy A01 and A02 control units, ensuring seamless integration and reliable performance.

NICE RONDO RN2010 | Reversible Motor for Doors up to 130kg

Product Overview The RONDO RN2010 is a reversible motor designed for balanced rolling doors up to 130kg. It features a smart design with a protective box for the limit switch unit and wiring, as well as a pre-wired capacitor for easy setup. The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with 48mm and 42mm adaptors, making it versatile and easy to install. Key Features Reversible motor without brake Suitable for balanced rolling doors up to 130kg Smart design with protective box for limit switch unit and wiring Pre-wired capacitor Easy and intuitive adjustment of limit switches Supplied with 200mm and 220mm flanges for 60mm shafts Includes 48mm and 42mm adaptors Easy installation with guided connector and three screws Recommended control units: Mindy A01 and A02 Product Description Reversible Motor RONDO RN2010 for Doors up to 130kg The RONDO RN2010 is an advanced reversible motor designed to handle balanced rolling doors up to 130kg with ease. This motor does not require a brake, making it a straightforward solution for many applications. The smart design includes a protective box that houses the limit switch unit and wiring, ensuring durability and neatness. Additionally, the motor comes with a pre-wired capacitor, simplifying the installation process. Fast and Intuitive Adjustment One of the standout features of the RN2010 is the easy and intuitive adjustment of the limit switches during both opening and closing. This makes setup and adjustments quick and hassle-free. Complete Installation Kit The motor is supplied with 200mm and 220mm flanges for 60mm shafts, along with adaptors for 48mm and 42mm shafts, providing flexibility for various installations. The guided connector allows for easy installation without the need to hold the motor in place, and it can be secured with just three screws. Recommended Control Units The RONDO RN2010 is compatible with the Mindy A01 and A02 control units, ensuring seamless integration and reliable performance.

NICE HYPPO HY7124 | 24 Vdc Motor with Magnetic Encoder and Telescopic Arm

Product Overview The HYPPO HY7124 is a 24 Vdc motor with a magnetic encoder and a sturdy telescopic arm, designed for 2-leaf folding doors. It features a galvanised and painted finish, ensuring durability and longevity. This motor is perfect for intensive use and is compatible with the Moonclever MC824H control unit, offering simple programming and advanced functionalities. Key Features Irreversible 24 Vdc motor Magnetic encoder for precise control Sturdy telescopic arm Galvanised and painted finish Solid metal mechanics Perfect for intensive use Compatible with Moonclever MC824H control unit Simple programming with a single key Self-learning of opening and closing limit positions Automatic fault diagnostics Programming of pause time Pedestrian pass door Deceleration on opening and closing Obstacle detection with dual technology Operation during power failure with optional rechargeable batteries Connectable with latest generation sensitive edges 8.2 kΩ BlueBus technology IP Rating: 20 Max Speed: 2 Motor Voltage: 24Vdc Solar power option available Product Description Irreversible HY7124 24 Vdc with Magnetic Encoder The HYPPO HY7124 motor is specifically designed for 2-leaf folding doors, offering advanced technology and robust performance. Its sturdy telescopic arm and galvanised, painted finish ensure durability and a long service life. The motor is equipped with a magnetic encoder for precise control and is perfect for intensive use. Advanced Control Compatibility This motor is compatible with the Moonclever MC824H control unit, which offers simple programming with a single key, self-learning of opening and closing limit positions, automatic fault diagnostics, programming of pause time, pedestrian pass door, deceleration on opening and closing, and obstacle detection with dual technology. It also allows for operation during power failures with optional rechargeable batteries. Easy Installation and Use The HY7124 motor is designed for easy installation and use. It features BlueBus technology for seamless communication with other system components and has an IP20 rating, providing adequate protection for most indoor applications. Durability and Protection The motor is built to last with a solid metal construction and galvanised, painted finish. It can operate in temperatures ranging from -20°C to +50°C and has a maximum speed of 2. The motor voltage is 24Vdc, and it also offers a solar power option for energy efficiency.

NICE HYPPO HY7100 | 230 Vac Motor with Telescopic Arm and Limit Switches

Product Overview The HYPPO HY7100 is a 230 Vac motor with a sturdy telescopic arm, designed for 2-leaf folding doors. It features a galvanised and painted finish, along with a limit switch on both opening and closing. This motor is pre-wired with an incorporated double limit-switch, ensuring fewer connections and quicker installation. Key Features Irreversible 230 Vac motor Sturdy telescopic arm Galvanised and painted finish Limit switch on opening and closing Pre-wired with incorporated double limit-switch Fewer connections for quicker installation Solid metal mechanics BlueBus technology IP Rating: 20 Max Speed: 2 Motor Voltage: 24Vdc Solar power option available Product Description Irreversible HY7100 230 Vac with Sturdy Telescopic Arm The HYPPO HY7100 motor is specifically designed for 2-leaf folding doors, offering advanced technology and robust performance. Its sturdy telescopic arm and galvanised, painted finish ensure durability and a long service life. The motor is pre-wired with an incorporated double limit-switch for both opening and closing, which reduces the number of connections and speeds up the installation process. Reliable and Efficient Operation This motor features solid metal mechanics and a sturdy telescopic arm, providing reliable and efficient operation for folding doors. The limit switches ensure precise control during both opening and closing. Advanced Technology Equipped with BlueBus technology, the HY7100 motor ensures seamless communication with other system components, enhancing overall functionality. The motor also offers a solar power option, making it an energy-efficient choice for various applications. Durability and Protection The motor has an IP20 rating, providing adequate protection for most indoor applications. Its solid metal construction and galvanised, painted finish ensure it can withstand harsh conditions and heavy use.

NICE Digital Keypad Selector EDSI | 12 Keys | Recessed Mounting for MORX Decoder

Product Overview The Nice EDSI digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDSI keypad is recessed-mounted with a 13mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes and the ability to store up to 255 codes, the EDSI keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Recessed-mounted with 13mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes Up to 255 storable codes Product Description The Nice EDSI digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The recessed-mounted design with a 13mm depth makes it easy to install discreetly, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDSI keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The recessed-mounted design with a 13mm depth makes the EDSI keypad easy to install discreetly in various locations. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDSI can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDSI keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Recessed-mounted, 13mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDSI Mounting hardware Instructions Applications The Nice EDSI digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE Digital Keypad Selector EDS | 12 Keys | To Be Combined with the MORX Decoder

Product Overview The Nice EDS digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDS keypad is surface-mounted with a 27mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes - Easy and Professional - and the ability to store up to 255 codes, the EDS keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Surface-mounted with 27mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes: Easy and Professional Up to 255 storable codes Product Description The Nice EDS digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The surface-mounted design with a 27mm depth makes it easy to install on various surfaces, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDS keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes, Easy and Professional, provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The surface-mounted design with a 27mm depth makes the EDS keypad easy to install on walls, gates, or other surfaces. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDS can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDS keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Surface-mounted, 27mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDS Mounting hardware Instructions Applications The Nice EDS digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

Pair of Outdoor Photocells EPSB "Slim" | Connections via Nice BlueBUS

Product Overview The Pair of Outdoor Photocells EPSB "Slim" are designed for enhanced safety and security in automated gate and garage door systems. Featuring a 15-meter range and compatibility with Nice BlueBUS connections, these photocells provide reliable obstacle detection with advanced features like an antiglare circuit and a durable ABS body resistant to various weather conditions. Key Features Compatible with Nice BlueBUS connections 15-meter range Antiglare circuit to eliminate sunlight interference 8-degree angle of reception Durable ABS body resistant to all weather conditions Slim design for easy installation Product Description The Slim Outdoor Photocells EPSB are an essential component for ensuring the safety and efficiency of your automated gate or garage door system. With a range of up to 15 meters, these photocells detect obstacles and help prevent accidents by signaling the gate or door to stop or reverse when an obstruction is detected. Their compatibility with Nice BlueBUS connections ensures seamless integration into your existing automation system. Advanced Features These photocells are equipped with an antiglare circuit that eliminates potential interference from sunlight, ensuring reliable performance even in bright conditions. The 8-degree angle of reception allows for precise detection, and the durable ABS body is designed to withstand all weather conditions, providing long-lasting reliability. Easy Installation and Integration The slim design of the EPSB photocells makes them easy to install in various locations, ensuring unobtrusive placement while maintaining optimal functionality. Their compatibility with Nice BlueBUS connections simplifies the integration process, allowing for quick and efficient setup. Specifications Range: Up to 15 meters Compatibility: Nice BlueBUS connections Antiglare Circuit: Eliminates sunlight interference Angle of Reception: 8 degrees Material: ABS body Design: Slim Applications The Slim Outdoor Photocells EPSB are ideal for use in residential, commercial, and industrial automated gate and garage door systems. Their advanced features and durable design make them a valuable addition to any automated setup, enhancing safety and security.

Safety Photocells BLUEBus EPMB | Obstacle Detection for Nice Automation Range

Product Overview The Safety Photocells BLUEBus EPMB are designed exclusively for the Nice Automation range. These fixed synchronized wired photocells utilize BlueBUS technology to detect obstacles on the optical axis between a transmitter (TX) and a receiver (RX). Compliant with Standard EN12453 (type D), the EPMB Photocells provide reliable obstacle detection, ensuring the safety of your automated gates and doors. Key Features Compatible only with the Nice Automation range Fixed synchronized wired photocells with BlueBUS technology Detect obstacles on the optical axis between transmitter (TX) and receiver (RX) Type D according to Standard EN12453 BlueBUS communication system for easy connection Power supply and signal transmission via two wires Product Description The Safety Photocells BLUEBus EPMB are essential components for enhancing the safety of your automated gates and doors. These photocells work by detecting obstacles that interrupt the optical axis between the transmitter (TX) and the receiver (RX). The EPMB Photocells are specifically designed for compatibility with the Nice Automation range, ensuring seamless integration and reliable performance. Advanced BlueBUS Technology Equipped with the Nice BlueBUS communication system, the EPMB Photocells allow for easy and efficient connection to control units using just two wires. This simplifies installation and reduces the amount of wiring required, making it a convenient solution for both new installations and upgrades. Reliable Obstacle Detection The EPMB Photocells are classified as type D according to Standard EN12453, providing dependable obstacle detection. This ensures that your automated systems can respond promptly to any obstructions, enhancing safety for users and preventing damage to the gates or doors. Specifications Technology: BlueBUS Compatibility: Nice Automation range only Obstacle detection: Optical axis interruption between TX and RX Standard compliance: EN12453 (type D) Connection: Two wires for power supply and signal transmission Easy Installation The BlueBUS technology used in the EPMB Photocells simplifies the installation process. By utilizing just two wires for both power supply and signal transmission, the need for extensive wiring is eliminated, making the setup straightforward and efficient.

NICE Mindy A924 Control Panel | For DC Motors with Encoder | Safety and Efficiency Features

Product Overview The Mindy A924 control panel is tailored for 24V DC motors, equipped with encoders to optimize gate automation by enhancing safety and operational efficiency. Product Description This control panel facilitates smooth and safe gate operation with advanced control features and built-in diagnostics tools. It's designed to manage single dc motor gates, providing a seamless user experience with its intelligent features and maintenance indicators. Key Features Designed for 24V DC motors with encoders. Intelligent clutch with anti-crush safety feature. Automatic memorization of limit switches for precise gate movement. Gradual departure and slowdown for smooth operation. Pedestrian passage function for convenient access. Programmable maintenance warning light. Built-in battery charger for uninterrupted operation. Pull-out terminal boards for easy maintenance and setup. What's in the Box Mindy A924 control panel, user manual, warranty card, mounting accessories. Specifications Voltage 24V DC Motor Compatibility Single DC motor with encoder Safety Features Anti-crush intelligent clutch, automatic limit switch memorization Additional Features Slowdown on operation, pedestrian function, built-in battery charger

Nice Moonclever MC424L Control Panel | For Swing Gates | Compatible with Solemyo Solar Kit

Product Overview The Nice Moonclever MC424L control panel is specifically tailored for 24 Vdc Nice gear motors, providing advanced control features and compatibility with the Solemyo solar power kit. Product Description This control unit is engineered for use with specific Nice gate motors without encoders, such as the Wingo4024, Wingo5024, and X-Metro2020. It integrates seamlessly into existing setups, offering reliable performance and enhanced safety features. Key Features Compatible with 24 Vdc Nice gear motors: Wingo4024, Wingo5024, X-Metro2020. Supports the Solemyo solar power kit for energy-efficient operation. Intelligent obstacle detection ensures safety throughout gate travel. Advanced diagnostics with visual indicators via flashing lights and LEDs. Provision for connecting latest generation resistive sensitive edges for added security. What's in the Box Moonclever MC424L control unit, user manual, warranty information. Specifications Power Supply 24Vdc Compatible Motors Wingo4024, Wingo5024, X-Metro2020 Safety Features Obstacle detection, Sensitive edge connection Additional Features Solar power compatibility, Diagnostic LEDs

Moonclever MC824H Control Panel | For Nice 24Vdc Swing Gate Motors | Advanced Features with Opera System

Product Overview The Moonclever MC824H control panel is designed for optimal control of Nice 24 Vdc swing gate motors. It integrates seamlessly with the Solemyo solar power system and the Opera management system, offering advanced features and remote diagnostics capabilities. Product Description This state-of-the-art control unit supports the latest technological innovations, including Nice BlueBUS technology, allowing easy connection of multiple devices. Its design is geared towards enhancing user interaction and gate management, providing a user-friendly interface with extensive customization options. Key Features Compatibility with Nice 24 Vdc gear motors and Solemyo solar power system. Supports Opera system for advanced management and programming. Equipped with BlueBUS technology for connecting up to 12 devices with two cables. Advanced obstacle detection with dual technology for increased safety. Microprocessor logic with self-learning of travel limits and pedestrian mode. Deceleration on opening and closing to ensure smooth, quiet operation. What's in the Box Moonclever MC824H control unit, installation manual, warranty card. Specifications Power Supply 24Vdc Technology Nice BlueBUS, Magnetic Encoder Safety Features Obstacle Detection, Anti-crushing Clutch Compatibility Nice Solemyo, Opera System Control Unit Dimensions Specified in the manual

NICE RUN Series Sliding Gate Motor Kits

Product Overview The NICE RUN series sliding gate motor kits provide complete automation solutions for residential and industrial applications, supporting gates from 400kg to 2500kg. These electromechanical gearmotors feature integrated control units with BlueBUS technology, enabling simple two-wire connections for up to 15 control, safety and signalling devices. The series includes high-speed models for rapid operation and standard models for heavy-duty applications. Key Features 230V AC power supply with 24V or 230V motor options BlueBUS technology for simplified two-wire installation Integrated control units with obstacle detection Temperature sensor adapting motor force to climatic conditions Master/slave selection for dual motor synchronization Adjustable acceleration and deceleration settings Self-diagnostics with flashing light indications Mechanically locking motor with aluminum release handle Solar power compatible Battery backup capability Specifications ModelRUN400HS-KITRUN1200HS-KITRUN1500-KITRUN1800-KITRUN2500-KITRUN2500I-KIT Max Gate Weight (kg) 400 1200 1500 1800 2500 2500 Power Supply 230V AC 230V AC 230V AC 230V AC 230V AC 230V AC Motor Voltage 24V DC 24V DC 24V DC 230V AC 230V AC 230V AC Gate Speed (m/min) 42 22 15 10 10 8.2-15.4 Duty Cycle Intensive Intensive Very-intensive Very-intensive Very-intensive Very-intensive Limit Switch Type Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Protection Class IP44 IP44 IP44 IP44 IP44 IP44 Operating Temperature (°C) -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 Special Features High Speed High Speed - - - Inverter Dimensions (L x W x H mm) 400 x 255 x 387 400 x 255 x 387 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 Accessories Standard Kit Contents: 1x NICE RUN series sliding gate motor with integrated control unit 2x NICE ON2E two-button transmitters 1x NICE EPMB pair of photocells 1x NICE OXI receiver Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

Nice FLO4 | 4-Button Remote Transmitter | 433.92 MHz Rolling Code

Product Overview The Nice FLO4 remote transmitter is a reliable and advanced remote control designed for use with Nice automation systems. This versatile remote can operate opening devices for gates, garage doors, roller shutters, and more. As part of the Nice Era FLOR series of transmitters, it ensures secure and efficient operation of your automated systems. Key Features Remote Frequency: 433.92 MHz Coding Type: Rolling code for enhanced security Includes batteries and instructions for easy setup Self-learning capabilities for quick programming Multi-user management with unique personal codes 4-channel programmable code transmitter Product Description Nice FLO4 | 4-Button Remote Transmitter | 433.92 MHz Rolling Code The Nice FLO4 is a branded remote control designed to integrate seamlessly with Nice automation systems. It is ideal for operating a variety of devices including gates, garage doors, and roller shutters. This 4-button remote transmitter operates at a frequency of 433.92 MHz and uses a rolling code system for enhanced security. The FLO4 is part of the Nice Era FLOR series and is compatible with all receivers using the FLO-R coding system. Features: Remote Frequency: 433.92 MHz Coding Type: Rolling code Included: Batteries and instructions Convenience: Self-learning capabilities for quick and easy programming Multi-user Management: Unique personal codes for multiple users Channels: 4-channel programmable code transmitter For compatibility, ensure your existing remote has a blue cover and a row of 10 white switches inside. If your remote does not match this description, you may need the Nice FLO4R remote. Please Note: It is important to verify that this is the correct remote for your needs, as other series remotes may look similar but use different coding systems.

Nice FLO2 | 2-Button Remote Transmitter | 433.92 MHz Fixed Code

Product Overview The Nice FLO2 remote transmitter is a reliable and easy-to-use remote control designed for use with Nice automation systems. This versatile remote can operate opening devices for gates, garage doors, roller shutters, and more. As part of the Nice FLO series of transmitters, it ensures smooth and secure operation of your automated systems. Key Features Remote Frequency: 433.92 MHz Coding Type: Fixed code with DIP switches for programmable coding, offering 1024 combinations Includes batteries and instructions for easy setup Can be attached to a keyring for convenience (keyring not supplied) 2-channel programmable code transmitter Product Description Nice FLO2 | 2-Button Remote Transmitter | 433.92 MHz Fixed Code The Nice FLO2 is a branded remote control designed to integrate seamlessly with Nice automation systems. It is ideal for operating a variety of devices including gates, garage doors, and roller shutters. This 2-button remote transmitter operates at a frequency of 433.92 MHz and uses a fixed code system with DIP switches inside for programmable coding, providing 1024 unique combinations. Features: Remote Frequency: 433.92 MHz Coding Type: Fixed code (contains DIP switches inside for programmable coding, 1024 combinations) Included: Batteries and instructions Convenience: Can be attached to a keyring (not supplied) Channels: 2-channel programmable code transmitter For compatibility, ensure your existing remote has a blue cover and a row of 10 white switches inside. If your remote does not match this description, you may need the Nice FLO2R remote. Please Note: It is important to verify that this is the correct remote for your needs, as the FLOR-S series remotes look very similar but do not contain the DIP switches.