NICE B-FAB5024-DKIT Underground Automation Kit

Product Overview The B-FAB5024-DKIT is a complete underground swing gate automation kit designed for heavy-duty residential and multi-residential applications. Supporting gates up to 5m in width or 900kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control of larger gate installations. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 5m width or 900kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Semi-intensive duty cycle (45 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration LCD display control panel Specifications ParameterB-FAB5024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 7 Power Rating (W) 170 Max Gate Weight per Leaf (kg) 900 Max Gate Length per Leaf (m) 5 Motor Speed (rpm) 0.8 Torque (Nm) 400 Working Cycle (cycles/hour) 45 Gate Speed 24 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 13.3 Foundation Box Weight (kg) 20.3 Foundation Box BFABBOX (painted) / BFABBOXI (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x BFAB5024 24V underground motors 2x BFABBOX foundation boxes 1x MC824H control panel with BlueBUS and LCD display 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.  

NICE L-FAB4024-DKIT | Underground Twin Gate Kit | Max Leaf 4m / 650Kg | 24V

Product Overview The L-FAB4024-DKIT is a complete underground swing gate automation kit designed for residential and multi-residential applications. Supporting gates up to 4m in width or 650kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 4m width or 650kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Intensive duty cycle (60 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration Specifications ParameterL-FAB4024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 5 Power Rating (W) 120 Max Gate Weight per Leaf (kg) 650 Max Gate Length per Leaf (m) 4 Motor Speed (rpm) 1 Torque (Nm) 300 Working Cycle (cycles/hour) 60 Gate Speed 18 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 12.5 Foundation Box BFABBOX4 (painted) / BFABBOX4I (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x LFAB4024 24V underground motors 2x BFABBOX4 foundation boxes 1x MC824H control panel with BlueBUS 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE L-FAB4024HS-DKIT | Underground Gate Kit | Max Leaf 4m / 400Kg | 24V

Product Overview The L-FAB4024HS-DKIT is a complete underground swing gate automation kit designed for intensive use applications. Supporting gates up to 4m in width or 400kg per leaf, this hi-speed system delivers 90° opening in approximately 6 seconds. The concealed underground installation provides optimal aesthetics while maintaining robust performance with IP67 protection. Key Features 24V DC motor with 230V AC power supply Hi-speed operation - 6 seconds for 90° opening Underground concealed installation Intensive use duty cycle (50 cycles/hour) IP67 waterproof protection Magnetic encoder for precise positioning Mechanical limit switches BlueBUS technology compatibility Manual release from inside and outside Built-in obstacle detection Battery backup ready Solar power compatible Specifications ParameterL-FAB4024HS-DKIT Max Gate Weight per Leaf (kg) 400 Max Gate Length per Leaf (m) 4 Power Supply 230V AC - 50/60Hz Motor Voltage 24V DC Motor Power (W) 170 Current Draw (A) 7 Speed (rpm) 3 Torque (Nm) 200 Opening Time (90°) 6 seconds Duty Cycle 50 cycles/hour (intensive) Protection Class IP67 Operating Temperature (°C) -20 to +55 Motor Dimensions (mm) 375 x 225 x 110h Foundation Box Dimensions (mm) 400 x 325 x 152h Motor Weight (kg) 12.5 Foundation Box Weight (kg) 14.4 Opening Angle 110° standard, 360° optional Accessories Kit includes: 2x NICE LFAB4024HS 24V swing gate motors 2x NICE LFABBOX4 foundation boxes 2x NICE ON2E two-button transmitters 1x NICE MC824H control panel 1x NICE EPMB pair of photocells 1x NICE OXI receiver 2x NICE MEA3 release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE M-FAB3024HS-DKIT | High-Speed Underground Gate Kit | Max Leaf 3m / 300Kg | 24V

Product Overview The NICE M-FAB3024HS-DKIT is a state-of-the-art solution for automating swing gates with leaves up to 3 meters in length or weighing up to 300kg. Designed for intensive use, this 24V DC kit features a magnetic encoder for precise control and rapid opening, achieving a 90-degree opening in approximately 8 seconds. Key Features Rapid Operation: 90-degree opening in about 8 seconds Reliable and Resistant: Solid internal metal parts and new IP67 waterproof die-cast aluminum Foundation Box Total Freedom of Choice: Release from inside and outside with key-operated models or lever version Simple to Use: Mechanical stop system on closure with standard opening max. 110° and optional opening 360° Compatibility: Fully compatible with the previous Metro series Moonclever MC824H Control Unit Simple programming with a single key Automatic memorization of limit switches with self-learning function Automatic fault diagnostics Programming of pause time Pedestrian pass door function Deceleration on opening and closing Dual technology obstacle detection Operation during power failure with optional batteries (PS324) housed inside the gear motor Provision for connecting latest generation resistive sensitive edges Kit Includes 2 x NICE MFAB3024HS 24V Motors 2 x NICE MFABBOX Foundation Boxes 2 x NICE ON2E 2 Button Transmitters 1 x NICE MC824H Control Panel 1 x NICE EPMB Pair of Photocells 1 x NICE OXI 4 Channel Receiver 2 x NICE MEA3 Release Mechanisms Technical Specifications SpecificationDetails Max length per gate 3000mm Installation Underground Motor voltage 24V Max weight per gate 300kg Max opening angle 110 degrees Locking method Mechanically locking motor Motor type Electromechanical Gate speed 8 seconds for 90 degrees Duty cycle Intensive Obstacle detection Built-in Mains power supply 230V Category Swing Gate Kit Why Choose the M-FAB3024HS-DKIT? The M-FAB3024HS-DKIT provides a comprehensive solution for fast and reliable swing gate automation. With easy installation, robust design, and advanced control features, it ensures your gates operate smoothly and efficiently.

NICE SPY800KCE Kit for Sectional and Up-and-Over Door Automation, 800 N

Product Overview The SPY800KCE kit is designed for automating sectional doors up to 12.5 sqm and up-and-over doors up to 14 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY800: SPY800 Gearmotor, 800 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 800 N Max Sectional Door Size: 12.5 sqm Max Up-and-Over Door Size: 14 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 800 N Max Sectional Door Size 12.5 sqm Max Up-and-Over Door Size 14 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY800KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 12.5 sqm and 14 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY650KCE Kit for Sectional and Up-and-Over Door Automation, 650 N

Product Overview The SPY650KCE kit is designed for automating sectional doors up to 10.5 sqm and up-and-over doors up to 11.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY650: SPY650 Gearmotor, 650 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 650 N Max Sectional Door Size: 10.5 sqm Max Up-and-Over Door Size: 11.5 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 650 N Max Sectional Door Size 10.5 sqm Max Up-and-Over Door Size 11.5 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY650KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 10.5 sqm and 11.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY550KCE Kit for Sectional and Up-and-Over Door Automation, 550 N

Product Overview The SPY550KCE kit is designed for automating sectional doors up to 9 sqm and up-and-over doors up to 10.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY550: SPY550 Gearmotor, 550 N 1 x SPYBOX: Control unit with built-in LED courtesy light and receiver 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 550 N Max Sectional Door Size: 9 sqm Max Up-and-Over Door Size: 10.5 sqm Control Unit: Built-in with LED courtesy light and receiver Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 550 N Max Sectional Door Size 9 sqm Max Up-and-Over Door Size 10.5 sqm Control Unit Built-in with LED courtesy light and receiver Transmitter Frequency 433.92 MHz Benefits: The SPY550KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 9 sqm and 10.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light and receiver facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE OLTRE1824 24 Vdc Irreversible Swing Gate Motor for Post or Leaf Profile Installation

Product Overview The Oltre 1824 is an innovative and invisible motor designed for swing gates. Suitable for gates weighing up to 100 kg and with a leaf length of up to 1.8 meters, this 24 Vdc irreversible motor is perfect for installation on the post or leaf profile. It features a release lever for easy operation. Key Features Gate Type: Swing gate Max Length per Gate Leaf: 1.8m Installation Type: Post or leaf profile Motor Voltage: 24V Max Weight per Gate Leaf: 100kg Locking Method: Mechanically locking motor Protection Rating: IP67 Release Mechanism: Release lever Specifications SpecificationDetails Code OLTRE1824 Power Supply (VDC) 24 Absorption (A) 1 Power (W) 25 Speed (RPM) 1.5 Torque (NM) 150 Work Cycle (cycles/hour) 60 Degree of Protection (IP) 67 Operating Temperature (°C Min/Max) -0.4 Dimensions (mm) 305 x 145 x 346 h Weight (kg) 5.5 Benefits The OLTRE1824 motor offers reliable and efficient automation for swing gates. Its 24 Vdc operation ensures safety and durability, while the release lever allows for manual operation in case of power failure. The IP67 protection rating guarantees resistance to dust and water, making it suitable for various environmental conditions. Installation and Setup The OLTRE1824 is designed for easy installation on either the post or leaf profile of your swing gate. Detailed installation instructions are provided in the manual to ensure a smooth and trouble-free setup. Always follow safety guidelines for optimal performance.

NICE Stainless steel foundation box BFABBOXI with built-in mechanical stop on opening

Big-FAB BFABBOXI For swing gates with leaves up to 5m, underground installation Stainless steel foundation box, with built-in mechanical stop on opening    

NICE Foundation box BFABBOX with cataphoresis paint finish with a built-in mechanical stop on opening

Big-FAB BFABBOX For swing gates with leaves up to 5 m, underground installation Foundation box, with cataphoresis paint, finish, with a built-in mechanical stop on opening

Stainless Steel Foundation Box LFABBOX4I for Swing Gates - Nice L-Fab Operators

Product Overview The L-FAB LFABBOX4I foundation box is crafted from high-quality stainless steel, designed for swing gates with leaves up to 4 meters. It features a built-in mechanical stop on opening and comes complete with a leaf coupling lever. This foundation box is ideal for underground installations, ensuring a clean and robust setup. Key Features Compatibility: For use with Nice L-Fab Operators, including BM4000 and BM4024 Max Gate Length: Suitable for swing gates with leaves up to 4 meters Installation Type: Underground installation for a discreet and clean appearance Material: Stainless steel for enhanced durability and corrosion resistance Mechanical Stop: Built-in mechanical stop on opening for precise control Leaf Coupling Lever: Complete with a leaf coupling lever for secure attachment Specifications SpecificationDetails Max Gate Length 4 meters Installation Type Underground Compatibility BM4000, BM4024 Material Stainless Steel Mechanical Stop Built-in on opening Leaf Coupling Lever Included Benefits The L-FAB LFABBOX4I foundation box provides a durable and reliable solution for your swing gate system. Its stainless steel construction offers excellent protection against environmental factors, while the built-in mechanical stop on opening ensures precise and controlled gate movements. The inclusion of a leaf coupling lever further enhances the security and stability of the installation. Installation and Setup Installing the LFABBOX4I foundation box is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE Foundation Box LFABBOX4 for Swing Gates - Cataphoresis Paint Finish

Product Overview The L-FAB LFABBOX4 foundation box is designed for swing gates with leaves up to 4 meters. It features a durable cataphoresis paint finish and is complete with a built-in mechanical stop on opening and a leaf coupling lever. This foundation box is ideal for underground installations, ensuring a clean and unobtrusive setup. Key Features Compatibility: For use with Nice L-Fab Operators, including BM4000 and BM4024 Max Gate Length: Suitable for swing gates with leaves up to 4 meters Installation Type: Underground installation for a discreet and clean appearance Paint Finish: Cataphoresis paint finish for enhanced durability and protection against corrosion Mechanical Stop: Built-in mechanical stop on opening for precise control Leaf Coupling Lever: Complete with a leaf coupling lever for secure attachment Specifications SpecificationDetails Max Gate Length 4 meters Installation Type Underground Compatibility BM4000, BM4024 Paint Finish Cataphoresis Mechanical Stop Built-in on opening Leaf Coupling Lever Included Benefits The L-FAB LFABBOX4 foundation box ensures a robust and reliable installation for your swing gate system. Its cataphoresis paint finish provides excellent protection against environmental factors, while the built-in mechanical stop on opening ensures precise and controlled gate movements. The inclusion of a leaf coupling lever further enhances the security and stability of the installation. Installation and Setup Installing the LFABBOX4 foundation box is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE M-FAB MFABBOXI Stainless Steel Foundation Box for Swing Gates

Product Overview The M-FAB MFABBOXI is a durable and reliable foundation box designed for swing gates with leaves up to 3.5 meters. This foundation box ensures a robust and secure underground installation for your gate system. Key Features Max Gate Length: Suitable for swing gates with leaves up to 3.5 meters Installation Type: Underground installation for a seamless and clean look Material: High-quality stainless steel for maximum durability Mechanical Stop: Integrated mechanical stop on opening for precise control Compatibility: Designed for use with Nice M-Fab Swing Gate Operators Specifications SpecificationDetails Max Gate Length 3.5 meters Installation Type Underground Material Stainless Steel Mechanical Stop On Opening Compatibility Nice M-Fab Swing Gate Operators Benefits The M-FAB MFABBOXI foundation box provides a sturdy and long-lasting solution for your swing gate system. Its stainless steel construction ensures resistance to environmental elements, while the mechanical stop feature allows for precise and controlled gate movements. Installation and Setup Installing the M-FAB MFABBOXI foundation box is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE S-FAB SFABBOX | Ultra-Compact Foundation Box for Swing Gates up to 2.3 Meters

Product Overview The S-FAB SFABBOX is a robust and ultra-compact foundation box designed for swing gates with leaves up to 2.3 meters. Ideal for underground installation, this foundation box ensures a sleek and unobtrusive setup. Key Features Max Gate Length: Suitable for swing gates with leaves up to 2300mm Installation Type: Underground installation for a clean and discreet setup Finish: Externally chamfered foundation box with cataphoresis paint finish for superior durability Leaf Coupling Lever: Complete with leaf coupling lever and mechanical stops on opening and closing Compatibility: Specifically designed for use with Nice X-Fab Swing Gate Operators Product Description S-FAB SFABBOX | Ultra-Compact Foundation Box for Swing Gates up to 2.3 Meters The S-FAB SFABBOX foundation box offers a blend of durability and practicality, making it an ideal choice for residential and commercial swing gate installations. Its ultra-compact design ensures minimal visual impact, while the cataphoresis paint finish provides excellent resistance to environmental factors. Technical Specifications SpecificationDetails Max Gate Length 2300mm Installation Type Underground Finish Cataphoresis paint Leaf Coupling Lever Included Mechanical Stops On opening and closing Compatibility Nice X-Fab Swing Gate Operators Benefits of the S-FAB SFABBOX The S-FAB SFABBOX foundation box offers a combination of durability and practicality, making it ideal for both residential and commercial applications. Its underground installation ensures an unobtrusive appearance, while the cataphoresis paint finish provides excellent resistance to environmental factors, ensuring long-lasting performance. Installation and Setup Installing the S-FAB SFABBOX is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with Nice X-Fab Swing Gate Operators.

Nice SPINKIT SPIN11KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN11KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3m pre-assembled guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Pre-assembled 3-metre guide for easy installation Product Description The SPINKIT SPIN11KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-assembled 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN11KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section.

Nice SPINKIT SPIN10KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN10KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3x1 m-sections linear guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINKIT SPIN10KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of three 1-metre guide sections provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN10KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections.

Nice SPIN23KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN23KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN23KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN23KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section.

Nice SPIN22KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN22KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Two guide sections: one 3-metre and one 1-metre, both 35mm thick, for flexible installation Product Description The SPIN22KCE is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of both a 3-metre and a 1-metre guide section provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN22KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section.

Nice SPIN21KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN21KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in SNA2 control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN21KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in SNA2 control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN21KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section.

Nice SPINBUSKIT20 | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINBUSKIT20 (SPIN20KCE) is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINBUSKIT20 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINBUSKIT20 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section.

Nice ROBUSKIT 600 | Sliding Gate Motor Kit | For Gates up to 600kg

Product Overview The ROBUSKIT 600 (RB600KCE) is a comprehensive automation kit for sliding gates weighing up to 600 kg. Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for gate automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc irreversible motor with incorporated control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Aluminium release handle for easy manual opening Protected compartment for control unit and buffer batteries Product Description The ROBUSKIT 600 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete gate automation system: 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver for Nice BlueBUS connections. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard. Specifications SpecificationDetails Gate Type Sliding Gate Motor Voltage 24V DC Max Weight per Gate 600 kg Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Gate Speed 16 m/min Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The ROBUSKIT 600 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sliding gates in different environments. Included in the Box 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard.

NICE HY7005 | Irreversible 230V Motor for Swing Gates with Leaves up to 3m

Product Overview The HY7005 is an irreversible motor designed for automating swing gates with leaves up to 3 meters, including those with large pillars. This robust motor operates on 230V and features a die-cast aluminium housing with a key-operated unlock system and an anti-shearing arm, making it a reliable and efficient choice for gate automation. Key Features Irreversible 230V motor Die-cast aluminium housing with key-operated unlock system Sturdy, anti-shearing arm, galvanised and painted Designed to accommodate external release Suitable for swing gates with leaves up to 3 meters Mechanically locking motor IP54 protection rating Gate speed: 18 seconds for 90 degrees Semi-intensive duty cycle Product Description HY7005 Irreversible 230V Motor for Swing Gates with Leaves up to 3m The Hyppo HY7005 motor is specifically designed for the automation of swing gates with leaves up to 3 meters in length. This motor is also suitable for gates with large pillars, providing versatile and robust performance. The HY7005 is an irreversible motor operating on 230V, featuring a die-cast aluminium housing and a key-operated unlock system with a protected key, designed to accommodate an external release. The sturdy, anti-shearing arm is galvanised and painted, and strengthened in areas subjected to greater mechanical stress, ensuring long-term reliability and performance. Advanced Features and Specifications Gate Type: Swing gate Max Length per Gate: 3000mm Above or Underground: Above ground Motor Voltage: 230V Max Weight per Gate: 330kg Max Opening Angle: 110 degrees Locking Method: Mechanically locking motor Type: Wired or wireless swing gate Motor Type: Electromechanical Protection Rating: IP54 Gate Speed: 18 seconds for 90 degrees Duty Cycle: Semi-intensive Mains Power Supply: 230V Category: Swing Gate Motor

NICE TENKIT TNLKCE | Irreversible Motor with Control Unit and Receiver for Doors up to 9m²

Product Overview The TENKIT TNLKCE is an irreversible 24 Vdc motor designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version features an incorporated control unit and receiver, a courtesy light, and a mechanical limit switch, ensuring reliable and efficient operation. Key Features Irreversible 24 Vdc motor Incorporated control unit and receiver Courtesy light for enhanced visibility Mechanical limit switch for precise operation Suitable for doors up to 9m² Compatible with projecting and non-projecting up-and-over doors Compatible with jointed doors Product Description TENKIT TNLKCE Irreversible Motor with Control Unit and Receiver The TENKIT TNLKCE motor is specifically designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version includes a 24 Vdc irreversible electromechanical gear motor with an incorporated control unit and plug-in receiver, a courtesy light, and a mechanical limit switch. The motor provides reliable performance and ease of use. Complete Kit for Easy Installation This comprehensive kit includes: 1 x TNKCE / TNLKCE irreversible electromechanical gear motor with control unit and plug-in receiver, courtesy light, and electromechanical limit switch 1 x TNA5 pair of standard telescopic arms 1 x TNA38 driving devices 1 x FLO2RE transmitter 433.92 MHz, 2 channels 1 x TS signboard Enhanced Features and Compatibility The TENKIT TNLKCE motor includes a courtesy light for improved visibility and safety. The mechanical limit switch ensures precise operation, making it suitable for various door types and applications. The motor is compatible with both projecting and non-projecting up-and-over doors, as well as jointed doors, providing versatile use.

NICE 24Vdc Irreversible LFAB4024 | Underground Swing Gate Motor with Magnetic Encoder

Product Overview The 24Vdc Irreversible LFAB4024 is a robust and reliable motor designed for underground installation on swing gates with leaves up to 4 meters in length. Equipped with a magnetic encoder and mechanical stop on closing, this motor ensures precise and secure gate operation. Its high protection rating of IP67 makes it suitable for various environmental conditions. Key Features 24Vdc irreversible motor with magnetic encoder Mechanical stop on closing Suitable for swing gates up to 4 meters in length and 650kg in weight Underground installation Max opening angle: 110 degrees Mechanically locking motor for enhanced security Electromechanical motor for reliable performance Protection rating: IP67 Gate speed: 18 seconds for 90 degrees Semi-intensive duty cycle Product Description The LFAB4024 is an advanced 24Vdc irreversible motor specifically designed for underground installation on swing gates. With a maximum gate length of 4 meters and a weight capacity of up to 650kg, this motor provides reliable and efficient operation for residential and commercial applications. Precision and Security The LFAB4024 features a magnetic encoder that ensures accurate and precise movement of the gate. The mechanical stop on closing further enhances security by providing a definitive stopping point, preventing over-travel and potential damage to the gate or motor. Durability and Reliability Constructed for underground installation, the LFAB4024 motor is built to withstand harsh environmental conditions. Its IP67 protection rating ensures resistance to dust and water, making it a durable choice for various climates. The electromechanical design offers reliable performance, while the mechanically locking motor provides added security when the motor is not in operation. Easy Installation and Operation Designed for ease of use, the LFAB4024 motor supports a semi-intensive duty cycle, making it suitable for both residential and light commercial applications. The motor operates at a speed of 18 seconds for a 90-degree opening, ensuring quick and efficient gate operation. Specifications Motor voltage: 24Vdc Gate type: Swing gate Max length per gate: 4000mm Above or underground: Underground Max weight per gate: 650kg Max opening angle: 110 degrees Locking method: Mechanically locking motor Wired or wireless: Wired Motor type: Electromechanical Protection rating: IP67 Gate speed: 18 seconds for 90 degrees Duty cycle: Semi-intensive Category: Swing Gate Motor

NICE RUN Series Sliding Gate Motor Kits

Product Overview The NICE RUN series sliding gate motor kits provide complete automation solutions for residential and industrial applications, supporting gates from 400kg to 2500kg. These electromechanical gearmotors feature integrated control units with BlueBUS technology, enabling simple two-wire connections for up to 15 control, safety and signalling devices. The series includes high-speed models for rapid operation and standard models for heavy-duty applications. Key Features 230V AC power supply with 24V or 230V motor options BlueBUS technology for simplified two-wire installation Integrated control units with obstacle detection Temperature sensor adapting motor force to climatic conditions Master/slave selection for dual motor synchronization Adjustable acceleration and deceleration settings Self-diagnostics with flashing light indications Mechanically locking motor with aluminum release handle Solar power compatible Battery backup capability Specifications ModelRUN400HS-KITRUN1200HS-KITRUN1500-KITRUN1800-KITRUN2500-KITRUN2500I-KIT Max Gate Weight (kg) 400 1200 1500 1800 2500 2500 Power Supply 230V AC 230V AC 230V AC 230V AC 230V AC 230V AC Motor Voltage 24V DC 24V DC 24V DC 230V AC 230V AC 230V AC Gate Speed (m/min) 42 22 15 10 10 8.2-15.4 Duty Cycle Intensive Intensive Very-intensive Very-intensive Very-intensive Very-intensive Limit Switch Type Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Protection Class IP44 IP44 IP44 IP44 IP44 IP44 Operating Temperature (°C) -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 Special Features High Speed High Speed - - - Inverter Dimensions (L x W x H mm) 400 x 255 x 387 400 x 255 x 387 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 Accessories Standard Kit Contents: 1x NICE RUN series sliding gate motor with integrated control unit 2x NICE ON2E two-button transmitters 1x NICE EPMB pair of photocells 1x NICE OXI receiver Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.