NICE SOLEMYO-KIT | Solar Power Kit for 24V Automation | 15W Panel / 20Ah Battery | 24V

Product Overview The SOLEMYO-KIT is a comprehensive solar power solution designed for gate, garage door, and road barrier automation systems. This self-contained kit enables installations in remote locations without mains power connection or excavation requirements. The system combines high-efficiency photovoltaic technology with extended battery reserves to ensure reliable operation even during prolonged overcast conditions. Key Features Complete solar power system for 24V automation systems Installable anywhere without mains power connection No excavation or wiring required for power supply Extended energy reserves for continuous operation Low power consumption design Weather-resistant components LED indication of full charge status Alternative mains charging capability Environmentally friendly clean energy solution Compatible with all Nice 24V automation systems Carrying handles for easy transportation Smart charging control circuit Specifications ComponentParameterValue PSY24 Battery Box Voltage (V) 24 Maximum Current (A) 10 Battery Capacity (Ah) 20 Protection Class IP44 Operating Temperature (°C) -20 to +50 Dimensions (mm) 235 x 170 x 258h Weight (kg) 14 SYP Solar Panel Maximum Power (Wp) 15 System Voltage (V) 24 Operating Temperature (°C) -40 to +85 Dimensions (mm) 390 x 28 x 415h Weight (kg) 1.9 SYA1 Mains Adapter Power Supply (VAC) 110-240 50/60Hz Maximum Power (W) 60 Operating Temperature (°C) 0 to +40 Dimensions (mm) 132 x 58 x 30h Weight (kg) 0.345 Accessories Kit includes: 1x SYP photovoltaic solar panel (15W, 24V) 1x PSY24 battery box with control circuit and carry handles 1x SYA1 mains adapter for manual charging Charging control circuit with LED indicators Installation hardware and documentation Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE M-FAB MFAB3100L: Irreversible 230 Vac Low Speed Swing Gate Motor with Grease Lubrication

Product Overview The M-FAB MFAB3100L is a robust and efficient swing gate motor designed for underground installation. Suitable for gates with leaves up to 3.5 meters, this motor ensures smooth and controlled operation with its advanced features. MFABM3000 is now MFABM3100 Key Features Max Gate Length: Suitable for swing gates with leaves up to 3000mm Installation Type: Underground installation for a discreet and clean setup Motor Voltage: 230 Vac for efficient and reliable performance Max Gate Weight: Can handle gates weighing up to 600kg Max Opening Angle: 110 degrees for optimal gate movement Locking Method: Mechanically locking motor for added security Motor Type: Electromechanical for precise control Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens 90 degrees in 18 seconds Duty Cycle: Semi-intensive use for frequent operation Grease Lubrication: Ensures smooth and long-lasting operation Specifications SpecificationDetails Max Gate Length 3000mm Installation Type Underground Motor Voltage 230 Vac Max Gate Weight 600kg Max Opening Angle 110 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 18 seconds for 90 degrees Duty Cycle Semi-intensive Benefits The M-FAB MFAB3100L swing gate motor offers a combination of reliability and performance, making it an ideal choice for both residential and commercial installations. Its underground design ensures minimal visual impact while providing robust security and smooth operation. Installation and Setup Installing the M-FAB MFAB3100L is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE M-FAB MFAB3100: Irreversible 230 Vac Swing Gate Motor with Increased Speed and Grease Lubrication

Product Overview The M-FAB MFAB3100 is a robust and efficient swing gate motor designed for underground installation. Suitable for gates with leaves up to 3.5 meters, this motor ensures smooth and fast operation with its advanced features. MFABM3000 is now MFABM3100 Key Features Max Gate Length: Suitable for swing gates with leaves up to 3000mm Installation Type: Underground installation for a discreet and clean setup Motor Voltage: 230 Vac for efficient and reliable performance Max Gate Weight: Can handle gates weighing up to 600kg Max Opening Angle: 110 degrees for optimal gate movement Locking Method: Mechanically locking motor for added security Motor Type: Electromechanical for precise control Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens 90 degrees in just 13 seconds Duty Cycle: Semi-intensive use for frequent operation Grease Lubrication: Ensures smooth and long-lasting operation Specifications SpecificationDetails Max Gate Length 3000mm Installation Type Underground Motor Voltage 230 Vac Max Gate Weight 600kg Max Opening Angle 110 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 13 seconds for 90 degrees Duty Cycle Semi-intensive Benefits The M-FAB MFAB3100 swing gate motor offers a combination of reliability and performance, making it an ideal choice for both residential and commercial installations. Its underground design ensures minimal visual impact while providing robust security and smooth operation. Installation and Setup Installing the M-FAB MFAB3100 is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE M-FAB MFAB3024: Irreversible 24 Vdc Swing Gate Motor with Magnetic Encoder

Product Overview The M-FAB MFAB3024 is a robust and reliable swing gate motor designed for underground installation. Suitable for gates with leaves up to 3.5 meters, this motor ensures smooth and efficient operation with its advanced features. Key Features Max Gate Length: Suitable for swing gates with leaves up to 3000mm Installation Type: Underground installation for a discreet and clean setup Motor Voltage: 24 Vdc for efficient and reliable performance Max Gate Weight: Can handle gates weighing up to 600kg Max Opening Angle: 110 degrees for optimal gate movement Locking Method: Mechanically locking motor for added security Motor Type: Electromechanical for precise control Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens 90 degrees in just 11 seconds Duty Cycle: Intensive use for frequent operation Magnetic Encoder: Ensures accurate movement and positioning Specifications SpecificationDetails Max Gate Length 3000mm Installation Type Underground Motor Voltage 24 Vdc Max Gate Weight 600kg Max Opening Angle 110 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 11 seconds for 90 degrees Duty Cycle Intensive Benefits The M-FAB MFAB3024 swing gate motor offers a combination of reliability and performance, making it an ideal choice for both residential and commercial installations. Its underground design ensures minimal visual impact while providing robust security and smooth operation. Installation and Setup Installing the M-FAB MFAB3024 is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE S-FAB SFABBOX | Ultra-Compact Foundation Box for Swing Gates up to 2.3 Meters

Product Overview The S-FAB SFABBOX is a robust and ultra-compact foundation box designed for swing gates with leaves up to 2.3 meters. Ideal for underground installation, this foundation box ensures a sleek and unobtrusive setup. Key Features Max Gate Length: Suitable for swing gates with leaves up to 2300mm Installation Type: Underground installation for a clean and discreet setup Finish: Externally chamfered foundation box with cataphoresis paint finish for superior durability Leaf Coupling Lever: Complete with leaf coupling lever and mechanical stops on opening and closing Compatibility: Specifically designed for use with Nice X-Fab Swing Gate Operators Product Description S-FAB SFABBOX | Ultra-Compact Foundation Box for Swing Gates up to 2.3 Meters The S-FAB SFABBOX foundation box offers a blend of durability and practicality, making it an ideal choice for residential and commercial swing gate installations. Its ultra-compact design ensures minimal visual impact, while the cataphoresis paint finish provides excellent resistance to environmental factors. Technical Specifications SpecificationDetails Max Gate Length 2300mm Installation Type Underground Finish Cataphoresis paint Leaf Coupling Lever Included Mechanical Stops On opening and closing Compatibility Nice X-Fab Swing Gate Operators Benefits of the S-FAB SFABBOX The S-FAB SFABBOX foundation box offers a combination of durability and practicality, making it ideal for both residential and commercial applications. Its underground installation ensures an unobtrusive appearance, while the cataphoresis paint finish provides excellent resistance to environmental factors, ensuring long-lasting performance. Installation and Setup Installing the S-FAB SFABBOX is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with Nice X-Fab Swing Gate Operators.

NICE Irreversible SFAB2124 | 24V DC Swing Gate Motor | Magnetic Encoder

Product Overview The SFAB2124 is a robust and reliable 24 Vdc swing gate motor, perfect for gates with leaves up to 2.3 meters. Designed for underground installation, this ultra-compact motor offers intensive use and features a magnetic encoder for precise control. Key Features Max Gate Length: Suitable for gates up to 2300mm Installation Type: Underground installation for a clean and discreet setup Motor Voltage: 24V DC for efficient operation Max Gate Weight: Supports gates weighing up to 400kg Max Opening Angle: Achieves a full 180-degree opening angle Locking Method: Mechanically locking motor ensures secure closure Motor Type: Electromechanical for reliable performance Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens to 90 degrees in just 15 seconds Duty Cycle: Designed for intensive use, ideal for high-traffic areas Mains Power Supply: 230V Product Description Irreversible SFAB2124 | 24V DC Swing Gate Motor | Magnetic Encoder The SFAB2124 motor is designed to provide robust and reliable performance for swing gates, particularly those with large columns. The 24V DC motor ensures smooth and efficient operation, while the magnetic encoder offers precise control. The underground installation provides a clean and unobtrusive appearance, making it a versatile solution for various gate automation needs. Technical Specifications SpecificationDetails Max Gate Length 2300mm Installation Type Underground Motor Voltage 24V DC Max Gate Weight 400kg Max Opening Angle 180 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 15 seconds to 90 degrees Duty Cycle Intensive Mains Power Supply 230V Benefits of the SFAB2124 Swing Gate Motor The SFAB2124 swing gate motor offers a combination of strength, reliability, and advanced technology, making it ideal for both residential and commercial applications. Its underground installation ensures an unobtrusive appearance, while the intensive duty cycle makes it perfect for frequently used gates. Installation and Setup Installing the SFAB2124 is straightforward, with clear instructions provided in the manual. The magnetic encoder allows for precise control, and the motor's compact size makes it suitable for various installation environments. Ensure to follow all safety guidelines for optimal performance.

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

Nice SPINKIT SPIN11KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN11KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3m pre-assembled guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Pre-assembled 3-metre guide for easy installation Product Description The SPINKIT SPIN11KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-assembled 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN11KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section.

Nice SPINKIT SPIN10KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN10KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3x1 m-sections linear guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINKIT SPIN10KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of three 1-metre guide sections provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN10KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections.

Nice SPIN23KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN23KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN23KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN23KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section.

Nice SPIN22KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN22KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Two guide sections: one 3-metre and one 1-metre, both 35mm thick, for flexible installation Product Description The SPIN22KCE is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of both a 3-metre and a 1-metre guide section provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN22KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section.

Nice SPIN21KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN21KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in SNA2 control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN21KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in SNA2 control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN21KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section.

Nice SPINBUSKIT20 | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINBUSKIT20 (SPIN20KCE) is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINBUSKIT20 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINBUSKIT20 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section.

Nice ROBUSKIT 600 | Sliding Gate Motor Kit | For Gates up to 600kg

Product Overview The ROBUSKIT 600 (RB600KCE) is a comprehensive automation kit for sliding gates weighing up to 600 kg. Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for gate automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc irreversible motor with incorporated control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Aluminium release handle for easy manual opening Protected compartment for control unit and buffer batteries Product Description The ROBUSKIT 600 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete gate automation system: 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver for Nice BlueBUS connections. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard. Specifications SpecificationDetails Gate Type Sliding Gate Motor Voltage 24V DC Max Weight per Gate 600 kg Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Gate Speed 16 m/min Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The ROBUSKIT 600 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sliding gates in different environments. Included in the Box 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard.

NICE Additional Memory Card for Era Decoder BM1000 - 255 Combinations

Additional memory for additional 255 combinations.

NICE Road Barrier System SBAR - Bar up to 4m - With Steel Case

S-BarElectromechanical road barrier system for road access control.For 4 m bars. Gearmotor, 24 VDC, with integrated control unit. Strength and reliability: sturdy steel structure, new robust balancing springs guaranteed to 500.000 cycles and elliptical section bar with high resistance to gusts of wind. Optional flashing light for integrated installation in cover. Easier programming and maintenance: separate compartments for the electronics and mechanics protect internal parts from possible hazards.Quick and easy access to the control unit locat-ed in the top part of the barrier body.The photocells, completely invisible from the outside, are fixed simply in place in the recesses provided in the barrier body. More reliability and safety: obstacle detec-tion and monitoring of motor draw throughout automation movement.Automatic fault diagnosis during operation and subsequent indication of type through different combinations of flashes.Provision for connection of latest generation optical and resistive sensitive edges (8.2 KOhm resistance). Energy saving: when the system is not in use, it switches to stand-by mode, reducing power consumption. No blackouts: operation in event of power failures with the optional batteries housed under the control unit. Side release with Nice triangular key: can be installed on either side.

NICE M5BAR | Road Barrier System for Bars up to 5m with Steel Case

Product Overview The NICE M5BAR is an electromechanical road barrier system designed for the control of road access with bars up to 5m. It features a 24 Vdc gear motor with a built-in control unit and loop detector, making it suitable for intensive use. This complete automatic barrier kit includes a 4m aluminium boom and additional accessories to ensure reliable and efficient operation. Key Features Electromechanical road barrier system Suitable for bars up to 5m 24 Vdc gear motor with built-in control unit and loop detector Steel case with protective cataphoresis treatment and paint finish Modular design with easily assembled aluminium expansion joint Robust structure with high strength balancing springs Guaranteed up to 1,000,000 opening and closing operations Elliptical section bar with high wind-gust resistance Encoder movement control and electromechanical limit switches Average opening time of 3 to 6 seconds Product Description NICE M5BAR Road Barrier System for Bars up to 5m The NICE M5BAR road barrier system is an advanced solution for controlling road access with bars up to 5m. This system features an electromechanical motor with a 24 Vdc gear motor and a built-in control unit and loop detector, ensuring smooth and reliable operation. The barrier system is designed for intensive use, with an average opening time ranging from 3 to 6 seconds. Complete Automatic Barrier Kit The M5BAR-KIT includes everything you need for a complete road barrier system. Inside the box, you will find: 1 x M5BAR Barrier Unit 1 x Internal Control Unit 2 x XBA Aluminium Boom 1 x XBA9 Expansion Joint 1 x WA10 Reflective Strips 1 x WA11 Fixed Rest The steel case with protective cataphoresis treatment and paint finish ensures durability and is suitable for intensive use. The modular design allows for easy assembly using the aluminium expansion joint. Strength and Reliability The NICE M5BAR barrier system is built with a robust structure and high strength balancing springs, guaranteeing up to 1,000,000 opening and closing operations. The elliptical section bar provides high wind-gust resistance, ensuring reliable performance in various weather conditions. Advanced Control Features The barrier system includes encoder movement control and electromechanical limit switches for precise operation and enhanced safety. These features ensure the barrier operates smoothly and efficiently, providing a reliable solution for road access control.

NICE Radio Digital Selector EDSWG | Wireless | Compatible with FLOR Series Receivers

Product Overview The Nice EDSWG radio digital selector is a compact and convenient access control device designed for compatibility with the receivers of the FLOR series. Featuring 13 keys and a backlit keypad, this wireless selector operates on a secure 433.92 MHz frequency with FLOR 52 bit self-learning rolling code for enhanced security. The EDSWG is surface-mounted with a depth of 27mm and is housed in a vandal-proof and weather-proof IP54 metal casing, ensuring durability and reliability in various conditions. Key Features 13-key surface-mounted backlit keypad Compact design with 27mm depth and 70mm length/width Acoustic feedback when buttons are pressed 100% wireless, no cables or wiring required Vandal-proof and weather-proof IP54 metal casing Operates in temperatures from -10°C to +55°C Three transmission channels for controlling separate systems or commands 433.92 MHz frequency FLOR 52 bit self-learning rolling code with up to 4.5 trillion combinations Opera radio coding Range of 25 meters in open space and 15 meters inside a building Energy-efficient design with ambient light sensor Automated turn-off when not in use, reactivates when a button is pressed Approximately 2 years of battery life (based on 10 transmissions a day) Operates using 2 x 3v CR2430 “coin style” batteries Product Description The Nice EDSWG radio digital selector is an essential component for secure and convenient access control. Designed for compatibility with FLOR series receivers, this 13-key selector offers wireless operation with no cables or wiring required. The backlit keypad and compact design (27mm depth and 70mm length/width) ensure ease of use and installation. The EDSWG provides acoustic feedback when buttons are pressed, enhancing user experience. Secure and Reliable The EDSWG operates on a 433.92 MHz frequency using FLOR 52 bit self-learning rolling code, offering up to 4.5 trillion combinations for enhanced security. The device supports three transmission channels, allowing for control of separate systems or different commands within a single automated system. The Opera radio coding ensures secure and reliable communication. Durable and Weather-Proof Encased in a vandal-proof and weather-proof IP54 metal casing, the EDSWG is designed to withstand harsh environmental conditions, ensuring long-lasting durability. The selector operates effectively in temperatures ranging from -10°C to +55°C, making it suitable for various installation environments. Energy Efficient The EDSWG features an ambient light sensor that activates keypad lighting only when necessary, significantly reducing energy consumption. The device also includes an automated turn-off function when not in use, reactivating whenever a button is pressed. With an estimated battery life of approximately 2 years (based on 10 transmissions per day), the EDSWG is highly energy-efficient. Specifications Keys: 13 Connection: Wireless to FLOR series receivers Mounting: Surface-mounted, 27mm depth Frequency: 433.92 MHz Coding: FLOR 52 bit self-learning rolling code Range: 25 meters in open space, 15 meters inside a building Protection Rating: IP54 Operating Temperature: -10°C to +55°C Battery Life: Approximately 2 years Power Supply: 2 x 3v CR2430 “coin style” batteries Package Contents Radio Digital Selector EDSWG Mounting hardware Instructions Applications The Nice EDSWG radio digital selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, secure operation, and ease of use make it a valuable addition to any automated setup, ensuring convenient and reliable access management.

NICE 12-Key Digital Selector EDSIB | BlueBUS Technology | Recessed Mounting

Product Overview The Nice EDSIB digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a 2-wire BlueBUS connection, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDSIB keypad is recessed-mounted with a 13mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes and the ability to store up to 255 codes, the EDSIB keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector BlueBUS technology for easy 2-wire connection Burglar-resistant metal body Recessed-mounted with 13mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes: Easy and Professional Up to 255 storable codes Product Description The Nice EDSIB digital keypad selector is an essential component for secure access control systems. Designed for use with Nice BlueBUS technology, this keypad provides a simple 2-wire connection to the control unit, ensuring a fast and error-free installation. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The recessed-mounted design with a 13mm depth makes it easy to install discreetly, while the backlit keypad ensures visibility and ease of use in low-light conditions. High Security and Versatility The EDSIB keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes, Easy and Professional, provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The recessed-mounted design with a 13mm depth makes the EDSIB keypad easy to install discreetly in various locations. The BlueBUS technology simplifies the connection process by using just two wires, reducing installation time and complexity. Additionally, the backlit keypad ensures that the EDSIB can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDSIB keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: BlueBUS technology, 2-wire non-polarized system Mounting: Recessed-mounted, 13mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Material: Burglar-resistant metal body Package Contents Digital Keypad Selector EDSIB Mounting hardware Instructions Applications The Nice EDSIB digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE 12-Key Digital Selector EDSB | BlueBUS Technology | Burglar Resistant Metal Body

Product Overview The Nice EDSB digital keypad selector is a high-security access control device featuring 12 keys and BlueBUS technology for easy 2-wire connection. Designed with a burglar-resistant metal body and surface-mounted with a 27mm depth, the EDSB keypad offers a secure 9-digit code with 999,999,999 possible combinations. The backlit keypad ensures easy use in low-light conditions, and the device supports up to 255 storable codes with two programming modes: Easy and Professional. Key Features 12-key digital keypad selector BlueBUS technology for easy 2-wire connection Burglar-resistant metal body Surface-mounted with 27mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes: Easy and Professional Up to 255 storable codes Product Description The Nice EDSB digital keypad selector is an essential component for secure access control systems. Featuring a durable and burglar-resistant metal body, this keypad is designed for surface mounting with a depth of 27mm. The EDSB keypad utilizes BlueBUS technology, allowing for a simple 2-wire, non-polarized connection to the control unit, which speeds up installation and minimizes errors. High Security and Versatility With a secure 9-digit code offering up to 999,999,999 possible combinations, the EDSB keypad ensures a high level of security for various access control applications. The device supports up to 255 storable codes, making it suitable for environments with multiple users or access points. The two programming modes, Easy and Professional, provide flexibility in setup and management, catering to both simple and advanced access control requirements. Easy Installation and Use The surface-mounted design with a 27mm depth makes the EDSB keypad easy to install on walls, gates, or other surfaces. The BlueBUS technology simplifies the connection process by using just two wires, reducing installation time and complexity. Additionally, the backlit keypad ensures that the EDSB can be used easily in low-light or nighttime conditions. Durable and Reliable Design Constructed with a burglar-resistant metal body, the EDSB keypad is built to withstand tampering and harsh environmental conditions, ensuring long-lasting performance and reliability. Specifications Keys: 12 Connection: BlueBUS technology, 2-wire non-polarized system Mounting: Surface-mounted, 27mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Material: Burglar-resistant metal body Package Contents Digital Keypad Selector EDSB Mounting hardware Instructions Applications The Nice EDSB digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE Decoder MORX for 1 EPT or up to 4 EDS/EDSI Connected in parallel with 1 BM1000 memory for 255 combinations

NICE MORX Decoder for use with one MOM or four MOT Digital Keypads connected

NICE Digital Keypad Selector EDSI | 12 Keys | Recessed Mounting for MORX Decoder

Product Overview The Nice EDSI digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDSI keypad is recessed-mounted with a 13mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes and the ability to store up to 255 codes, the EDSI keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Recessed-mounted with 13mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes Up to 255 storable codes Product Description The Nice EDSI digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The recessed-mounted design with a 13mm depth makes it easy to install discreetly, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDSI keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The recessed-mounted design with a 13mm depth makes the EDSI keypad easy to install discreetly in various locations. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDSI can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDSI keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Recessed-mounted, 13mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDSI Mounting hardware Instructions Applications The Nice EDSI digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE Digital Keypad Selector EDS | 12 Keys | To Be Combined with the MORX Decoder

Product Overview The Nice EDS digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDS keypad is surface-mounted with a 27mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes - Easy and Professional - and the ability to store up to 255 codes, the EDS keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Surface-mounted with 27mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes: Easy and Professional Up to 255 storable codes Product Description The Nice EDS digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The surface-mounted design with a 27mm depth makes it easy to install on various surfaces, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDS keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes, Easy and Professional, provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The surface-mounted design with a 27mm depth makes the EDS keypad easy to install on walls, gates, or other surfaces. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDS can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDS keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Surface-mounted, 27mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDS Mounting hardware Instructions Applications The Nice EDS digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE HIGH SPEED KIT WG3524HS | Fast Swing Gate Opener | For Gates up to 3m

Product Overview The HIGH SPEED KIT WG3524HS is designed for fast and reliable automation of swing gates up to 3 meters wide and 200 kg in weight, ideal for residential settings. Product Description This 24Vdc high-speed gate opener is equipped with a magnetic encoder and mechanical stops on both opening and closing. Its design ensures quick maneuvers, with a 90-degree opening in less than 10 seconds, combining efficiency with durability. Key Features Quick Operation: Achieves a 90-degree opening in less than 10 seconds. Reliable Encoding: Magnetic encoder maintains precise control and obstacle detection. Silent Operation: Uses a patented layout for minimal noise and fewer mechanical parts. Easy Installation: Simplifies setup with above-ground electrical connections. Pre-assembled travel stops on opening for added convenience. What's in the Box The kit includes the WG3524HS gate motor, Moonclever MC824H control unit, pre-assembled opening stops, and installation hardware. Specifications Power Supply 24V Absorption 5A Power 120W Speed 0.04 m/s Force 1500N Work Cycle 30 cycles/hour Dimensions 920 x 98 x 95 mm Weight 6Kg

Nice FLO2 | 2-Button Remote Transmitter | 433.92 MHz Fixed Code

Product Overview The Nice FLO2 remote transmitter is a reliable and easy-to-use remote control designed for use with Nice automation systems. This versatile remote can operate opening devices for gates, garage doors, roller shutters, and more. As part of the Nice FLO series of transmitters, it ensures smooth and secure operation of your automated systems. Key Features Remote Frequency: 433.92 MHz Coding Type: Fixed code with DIP switches for programmable coding, offering 1024 combinations Includes batteries and instructions for easy setup Can be attached to a keyring for convenience (keyring not supplied) 2-channel programmable code transmitter Product Description Nice FLO2 | 2-Button Remote Transmitter | 433.92 MHz Fixed Code The Nice FLO2 is a branded remote control designed to integrate seamlessly with Nice automation systems. It is ideal for operating a variety of devices including gates, garage doors, and roller shutters. This 2-button remote transmitter operates at a frequency of 433.92 MHz and uses a fixed code system with DIP switches inside for programmable coding, providing 1024 unique combinations. Features: Remote Frequency: 433.92 MHz Coding Type: Fixed code (contains DIP switches inside for programmable coding, 1024 combinations) Included: Batteries and instructions Convenience: Can be attached to a keyring (not supplied) Channels: 2-channel programmable code transmitter For compatibility, ensure your existing remote has a blue cover and a row of 10 white switches inside. If your remote does not match this description, you may need the Nice FLO2R remote. Please Note: It is important to verify that this is the correct remote for your needs, as the FLOR-S series remotes look very similar but do not contain the DIP switches.