GIBIDI KIT TOP EVO | Hydraulic Operator Kit for Gates up to 6m (230V)

Product Overview KIT TOP EVO - Hydraulic Operator Kit for Gates up to 6 meters (230V) is designed for heavy, medium, and large size swing gates. Suitable for both residential and intensive use, this 230 Vac hydraulic operators kit offers reliable and efficient performance. Key Features Easy to install with preloaded and factory adjusted components Silent and fast with hydraulic slowdowns in the last 3cm of rod travel Technologically advanced with vacuum loading process to prevent condensation and emulsion New die-cast aluminium back-end and torque settings valves Suitable for gates from small residential to large commercial or industrial types Product Description EASY TO INSTALL TOP EVO is already preloaded and factory adjusted, ready for use, with no purge valves or oil to top up. Mounting brackets supplied. SILENT AND FAST Extremely silent and fast. Hydraulic slowdowns integrated in the last 3cm of rod travel. TECHNOLOGICAL AND SAFE Built with unique technology; the vacuum loading process leaves no air residues inside, preventing condensation and emulsion. The pump-distributor coupling is without any gasket, a unique system destined to remain unchanged over time. New die-cast aluminium back-end. Complete with torque settings valves and the new embedded device to select the reversible, irreversible, or mixed mode. A COMPLETE AND RELIABLE RANGE From a small residential gate to 6-meter doors of a commercial or industrial type, this kit includes special motors for intensive use. Specifications FeatureTOP291E - ER - ER/STOP391E - ER - ER/STOP441E - ER - ER/S Type of use Heavy Duty Heavy Duty Heavy Duty Frequency of use 55% 55% 55% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz Absorbed power 170W 190W 190W Degree of protection IP65 IP65 IP65 Rod speed 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) Max rod stroke 265 mm (290 mm for E) 265 mm (290 mm for E) 425 mm (440 mm for E) Max thrust force 3000 N (2200 N for ER/S) 4500 N (3000 N for ER/S) 4500 N (3000 N for ER/S) Force adjustment Hydraulic Hydraulic Hydraulic Speed adjustment Electronic ** Electronic ** Electronic ** Hydraulic slowdown Yes (No for E) Yes (No for E) Yes (No for E) Max leaf length 3.5 m * 4.5 m * 6.0 m * Operating temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C Rod diameter 16 mm 20 mm 20 mm Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Operator weight 7.7 Kg 8.7 Kg 10 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary. ** By the use of the BA230 control board What's in the Box ComponentQuantity TOP EVO according operator 2 AS06320 for 1 or 2 motors (F4) 1 AU02910 2 channels plug-in receiver board for control units 1 70710 complete flashing lamp device DSL70710 230 Vdc 1 AU03100 MAKO remote control 433Mhz 2 AU01940 wall mounted key selector model DCS100 1 AU02250 pair of DCF180 wall mounted photocells 1 AJ75800 gate warning plate 1

FADINI KIT DARDO 430 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 430 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 430 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vdc operators (F/430L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 43 control unit (F/4300L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT NUPI 66 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT NUPI 66 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT NUPI 66 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/661L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 7 RP control unit (F/6610L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/6660K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/107L - TRIFO 11 pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/6661K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI HINDI 880 SPRINT KIT | Swing Gate Operator | 400 kg, 2.3 m

Product Overview The FADINI HINDI 880 SPRINT KIT is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.3 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI HINDI 880 SPRINT KIT is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/888L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 27 control unit (F/7047L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential and commercial swing gate automation. Kit Contents 2x F/888L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/7047L - ELPRO 27 control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FAAC 413 LS KIT S Swing Gate Operator Kit - Single Gate

Product Overview The FAAC 413 LS KIT S is a comprehensive single gate operator kit designed for residential and light commercial swing gates, accommodating up to 2.5m per leaf. Key Features Complete kit for a single swing gate Suitable for residential and light commercial applications Maximum gate weight per leaf: 200kg Maximum gate length per leaf: 2500mm Above ground installation Electromechanical motor with mechanically locking method Power supply voltage: 230v Motor voltage: 230v Gate speed: 15 seconds for 90 degrees Duty cycle: 30 cycles per hour Protection rating: IP44 (resistant to dust and water splashes) Kit Contents 1 x FAAC 413 LS 230v Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in Receiver/Decoder 2 x FAAC 868 SLH 2-Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Additional Features Adjustable speed control for opening and closing Integrated open and close limits for easy setup LCD display on control panel for simplified programming Quick and easy installation on existing swing gates Compatibility and Application The FAAC 413 LS KIT S is ideal for enhancing the functionality and security of single swing gates in residential and light commercial settings. It provides reliable operation, ease of installation, and essential features for automated gate systems.

V2 Gate Automation V2 VULCAN 230Vac Underground Kit | Swing Gates up to 3.5m | Digital Control

Product Overview The V2 VULCAN 230Vac underground kit is a comprehensive solution designed for automating swing gates with leaves up to 3.5 meters. This kit includes all necessary components to ensure reliable and efficient operation, making it an ideal solution for residential or commercial applications. Key Features Complete kit for automating swing gates up to 3.5 meters Includes 2 x Vulcan-230V motors with opening and closing mechanical stop 2 x Cataphoresis foundation boxes for standard 110° opening 2 x Shoe with lever manual release 1 x City1 EVO digital control unit with obstacle detection and slow down 1 x MR2 plug-in radio receiver 1 x Pair of SENSIVA safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters Product Description The V2 VULCAN 230Vac underground kit provides a reliable and robust solution for automating swing gates with leaves up to 3.5 meters. This complete double leaf kit includes two Vulcan-230V motors with mechanical stops for both opening and closing, ensuring precise gate movement. The underground installation provides a sleek and discreet appearance. The kit is equipped with a City1 EVO digital control unit, allowing for easy and intuitive control of the gate system. The control unit features obstacle detection and a slow down function to enhance safety and reliability. The included MR2 plug-in radio receiver and SENSIVA safety photocells further improve the system's functionality and security. Two Phox 2-button transmitters operating at 433.92MHz provide convenient remote control of the gate. The Vulcan-230V motors come with cataphoresis foundation boxes designed for a standard 110° opening. The motors also feature shoes with lever manual release for manual operation when needed. These features ensure the system is versatile and user-friendly. What's in the Box 2 x Vulcan-230V motors with opening and closing mechanical stop 2 x Cataphoresis foundation boxes for standard 110° opening 2 x Shoe with lever manual release 1 x City1 EVO digital control unit with obstacle detection and slow down 1 x MR2 plug-in radio receiver 1 x Pair of SENSIVA safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters

V2 Gate Automation V2 Calypso 230Vac Linear Screw Kit | Swing Gates up to 2.5m | Digital Control

Product Overview The V2 Calypso 230Vac linear screw kit is a comprehensive solution designed for automating swing gates with leaves up to 2.5 meters. This kit includes all necessary components to ensure reliable and efficient operation, making it an ideal solution for residential or commercial applications. Key Features Complete kit for automating swing gates up to 2.5 meters Includes 2 x Calypso400 irreversible operators 1 x City1 EVO digital control unit 1 x MR2 plug-in radio receiver 1 x Pair of Sensiva XS safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters Supports up to 30 cycles per hour Slow down function Obstacle detection function Product Description The V2 Calypso 230Vac linear screw kit provides a reliable and robust solution for automating swing gates with leaves up to 2.5 meters. This complete kit includes two Calypso400 irreversible operators, ensuring smooth and precise gate movement. The linear screw design offers enhanced durability and strength, making it suitable for frequent use with up to 30 cycles per hour. The kit is equipped with a City1 EVO digital control unit, allowing for easy and intuitive control of the gate system. The included MR2 plug-in radio receiver and Sensiva XS safety photocells enhance the system's safety and functionality. Two Phox 2-button transmitters operating at 433.92MHz provide convenient remote control of the gate. The Calypso400 motor features a slow down function and obstacle detection to ensure safe and reliable operation. These features help prevent damage to the gate and enhance overall safety. What's in the Box 2 x Calypso400 irreversible operators 1 x City1 EVO digital control unit 1 x MR2 plug-in radio receiver 1 x Pair of Sensiva XS safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters

V2 Gate Automation V2 BLITZ 22E001DK | Articulated Arm Kit for Swing Gates | For Gates up to 3m

Product Overview The V2 BLITZ 22E001DK is a comprehensive articulated arm kit designed for automating swing gates with leaves up to 3 meters. This kit includes all necessary components to ensure reliable and efficient operation, making it an ideal solution for residential or commercial applications. Key Features Complete double leaf kit with irreversible articulated arm motor Designed for swing gates with leaves up to 3 meters Includes 2 x Blitz230V irreversible operators with limit switch 1 x City1-EVO digital control unit 1 x MR2 plug-in radio receiver 1 x Pair of Sensiva safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters Protective hatch with customized key Internal release lever Built-in cabled limit switches Anti-shear pivoted arm Product Description The V2 BLITZ 22E001DK kit provides a reliable and robust solution for automating swing gates with leaves up to 3 meters. This complete double leaf kit includes two Blitz230V irreversible operators with built-in limit switches, ensuring smooth and precise gate movement. The articulated arm design offers enhanced durability and strength, featuring an anti-shear pivoted arm for added safety. The kit is equipped with a City1-EVO digital control unit, allowing for easy and intuitive control of the gate system. The included MR2 plug-in radio receiver and Sensiva safety photocells enhance the system's safety and functionality. Two Phox 2-button transmitters operating at 433.92MHz provide convenient remote control of the gate. The Blitz230V motor features a protective hatch with a customized key for secure access and an internal release lever for manual operation in case of power failure. The built-in cabled limit switches ensure precise gate positioning and reliable operation. What's in the Box 2 x Blitz230V irreversible operators with limit switch 1 x City1-EVO digital control unit 1 x MR2 plug-in radio receiver 1 x Pair of Sensiva safety photocells 2 x Phox 2-buttons, 433.92MHz transmitters

ROGER TECHNOLOGY SET H23 - Pair of Electromechanical Articulated Motors | 230V | 2.8m Leaf

Product Overview The SET H23 includes a pair of 230V AC irreversible electromechanical articulated motors, perfect for swing gates with leaves up to 2.8 meters in length. This kit provides a reliable and efficient solution for both residential and commercial swing gate applications. Key Features Suitable for swing gates with leaves up to 2.8 meters 230V AC power supply Irreversible electromechanical motors Equipped with an encoder for precise control Mechanical limit switch Specifications FeatureSpecification Power Supply 230V AC - 50Hz Motor Power Supply 230V AC Power Rating 200W Frequency of Use 50% Torque 300 N m Operating Temperature Range -20 to +55°C Protection Level IP43 Manoeuvre Speed 1.2 Rpm Opening Time 12 seconds Motor Thermal Protection 150°C Limit Switch Microswitch for both opening and closing Encoder Optical type Dimensions (L x W x H) 230 x 190 x 284 mm Product Weight 29.2 Kg What's in the Box 2x - H23/282: Electromechanical articulated motor 230V AC irreversible for swing gates with leaf up to 2.8m, with encoder and mechanical limit switch. 1x - H70/200AC/BOX: Control unit for 2 motors 230V AC with slow down, housed in a plastic box. 1x - H93/RX22A/I: Plug-in receiver fixed code 2 channels 433.92 MHz (500 storable codes) for control unit series H70, B70, EDGE, and CTRL. 2x - T80/TX2: Dual code transmitter (fixed code or rolling code), 433.92 MHz, 2 channels, with radio for copy. 1x - R90/F2ES: Pair of external photocells synchronized. 1x - FIFTHY/230: LED flashing light series FIFTHY 230V - 115V with integrated antenna. 1x - R99/C/001: Signboard "Automatic Opening". Applications The SET H23 is suitable for various settings, including residential driveways, commercial entrances, and industrial access points. Its robust design and comprehensive features ensure reliable and long-lasting performance. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

ROGER TECHNOLOGY KIT R23/373 - Above Ground Swing Gate Kit | 3.5m Leaf

Product Overview The KIT R23/373 is a complete above ground swing gate solution, ideal for residential and commercial properties with swing gates that have leaves up to 3.5 meters in length. This kit includes all the necessary components for a reliable and efficient installation. Key Features Suitable for swing gates with leaves up to 3.5 meters 230V AC power supply Irreversible electromechanical motors Mechanical limit switch for precise control What's in the Box 2x R23/372 230V Motor(s) H70/200AC/BOX Control Board 2x E80/TX52R/2 Remote Controls H93 Receiver R90/F2ES Photocells Flashing Light Antenna Specifications FeatureSpecification Power Supply 230V AC - 50Hz Motor Power Supply 230V AC Power Rating 200W Frequency of Use 50% Torque 400 N m Manoeuvre Speed 1.5 Rpm Opening Time 14 s Protection Level IP43 Dimensions (L x W x H) 355 x 190 x 160 mm Product Weight 35.2 Kg Accessories Standard Accessories KT208: Plate for fixing to post R23 series KT218: Gate pull bracket for series articulated LT302: Short arms for articulated motor Applications The KIT R23/373 is perfect for a variety of settings, including residential driveways, commercial entrances, and industrial access points. Its robust design and comprehensive features ensure reliable and long-lasting performance. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

ROGER TECHNOLOGY R20 Pair Kit (230V) | Electromechanical Operator for Swing Gates | Up to 3.5m

Product Overview The R20 Pair Kit (230V) is an electromechanical operator system designed for swing gates with leaves up to 3.5m. This double kit is equipped with irreversible operators and a microswitch, ensuring reliable performance and security. It includes all necessary components for a complete installation, making it ideal for residential and commercial applications. Key Features For swing gates with leaves up to 3.5m 230V AC power supply Irreversible operators Rated output of 200W Thrust of 2500N Protection rating of IP 43 Stroke length of 320 mm Operating speed of 1.66 cm/s Includes control unit, receiver, transmitters, photocells, flashing light, and signboard Product Description The R20 Pair Kit (230V) is a comprehensive solution for automating swing gates up to 3.5m in length. This electromechanical operator system is powered by a 230V AC supply and features irreversible operators with a microswitch for enhanced security and reliability. The kit includes everything needed for installation, ensuring a smooth and efficient setup process. Durable and Efficient With a rated output of 200W and a thrust of 2500N, the R20 Pair Kit provides robust performance for medium to heavy-duty swing gates. The operators are designed to withstand various weather conditions, boasting a protection rating of IP 43. The stroke length of 320 mm and an operating speed of 1.66 cm/s ensure smooth and efficient gate movement. Complete Installation Kit This kit includes all essential components for a complete installation: 2x Operators: Electromechanical actuators for smooth gate movement. 1x Control Unit: H70/200AC/BOX for two 230V AC motors, featuring slow down functionality and a plastic box. 1x Receiver: H93/RX22A/I plug-in receiver with fixed code, 2 channels, 433.92 MHz, capable of storing up to 500 codes. 2x Transmitters: T80/TX2 dual code transmitters with fixed or rolling code options, 433.92 MHz, 2 channels, with radio for copy. 1x Pair of Photocells: R90/F2ES external synchronized photocells for obstacle detection. 1x Flashing Light: FIFTHY/230 LED flashing light with integrated antenna, 230V - 115V. 1x Signboard: R99/C/001 "Automatic Opening" signboard for clear indication. Specifications Type: Double Swing Gates Actuator System Power Supply: 230V AC 50Hz Rated Output: 200W Thrust: 2500N Protection: IP 43 Stroke: 320 mm Operating Speed: 1.66 cm/s Components: Electromechanical actuator, control unit, receiver, transmitter, photocells, flashing light, and signboard Applications The R20 Pair Kit (230V) is perfect for automating residential and commercial swing gates with leaves up to 3.5m. Its durable design and comprehensive components ensure reliable and efficient gate operation, enhancing security and convenience for users.

SEA AUTOMATION SEA Alpha 330 Plus Paired UK Kit | 400mm Stroke Swing Gate Operator with Limits | Complete Kit - ALPHA+KIT

Product Overview The SEA Alpha 330 Plus Paired UK Kit offers a comprehensive solution for swing gate automation. Featuring a 400mm stroke with limit switches and designed for domestic and light commercial use, this complete kit includes all necessary components for installation and operation, ensuring a reliable and efficient gate system. Product Description The Alpha 330 Plus Paired UK Kit from SEA is an electromechanical, irreversible operator suitable for both main and low voltage applications. Designed for domestic and light commercial use, it can handle gate leaves up to 5.5 meters and opens gates to an angle of up to 120 degrees. The kit includes two rams, a pair of photocells, a radio receiver, and two remote transmitters, making it a complete package for your gate automation needs. The operator features adjustable limit switches, a simple lever-operated manual release system, and a bushed rear bracket with a brass rear fixing bolt. Additionally, a fully adjustable non-weld rear bracket is available for enhanced flexibility. Key Features 400mm stroke with limit switches for precise control Electromechanical design for durability and reliability Adjustable limit switches Simple lever-operated manual release system Bushed rear bracket with brass rear fixing bolt Fully adjustable non-weld rear bracket available Opens gates up to an angle of 120 degrees Suitable for domestic and light commercial use What's in the Box 2x SEA Alpha 330 Rams 1x Pair of photocells 1x Radio receiver 2x Remote transmitters Specifications Model: SEA Alpha 330 Plus Paired UK Kit Stroke: 400mm Operation: Electromechanical, irreversible Max Leaf Length: 5.5 meters Opening Angle: Up to 120 degrees Limit Switches: Adjustable Release System: Lever-operated manual release Bracket: Bushed rear bracket with brass rear fixing bolt, fully adjustable non-weld rear bracket available Usage: Domestic and light commercial

SEA AUTOMATION SEA Alpha 330 UK Paired Kit | 400mm Stroke Swing Gate Operator | Full Kit - ALPHAKIT

Product Overview The SEA Alpha 330 UK Paired Kit provides a comprehensive solution for swing gate automation. Featuring a 400mm stroke and designed for domestic and light commercial use, this full kit includes everything needed for installation and operation, ensuring a reliable and efficient gate system. Product Description The Alpha 330 UK Paired Kit from SEA is an electromechanical, irreversible operator suitable for both main and low voltage applications. Designed for domestic and light commercial use, it can handle gate leaves up to 5.5 meters and opens gates to an angle of up to 120 degrees. The kit includes two rams, a pair of photocells, a radio receiver, and two remote transmitters, making it a complete package for your gate automation needs. The operator features adjustable limit switches, a simple lever-operated manual release system, and a bushed rear bracket with a brass rear fixing bolt. Additionally, a fully adjustable non-weld rear bracket is available for enhanced flexibility. Key Features 400mm stroke for various gate sizes Electromechanical design for durability and reliability Adjustable limit switches Simple lever-operated manual release system Bushed rear bracket with brass rear fixing bolt Fully adjustable non-weld rear bracket available Opens gates up to an angle of 120 degrees Suitable for domestic and light commercial use What's in the Box 2x SEA Alpha 330 Rams 1x Pair of photocells 1x Radio receiver 2x Remote transmitters Specifications Model: SEA Alpha 330 UK Paired Kit Stroke: 400mm Operation: Electromechanical, irreversible Max Leaf Length: 5.5 meters Opening Angle: Up to 120 degrees Limit Switches: Adjustable Release System: Lever-operated manual release Bracket: Bushed rear bracket with brass rear fixing bolt, fully adjustable non-weld rear bracket available Usage: Domestic and light commercial

SEA AUTOMATION SEA SURF350KIT | Complete Swing Gate Kit with Electronic & Mechanical Limits | For Gates Up to 3.5m, 250-300kg

Product Overview The SEA SURF350KIT is a comprehensive swing gate kit designed for residential use. This kit is suitable for gate leaves up to 3.5 meters in length and weighing between 250 to 300 kg. It features both electronic and mechanical limit switches, ensuring precise and reliable operation. Product Description The SURF350KIT includes all necessary components for a robust and efficient swing gate automation solution. The kit is compatible with current sensing control panels and features built-in physical stops and limit switches, providing enhanced functionality and safety. The electromechanical design ensures durability and long-lasting performance, making it ideal for residential applications. Key Features Complete swing gate kit with electronic and mechanical limits Supports gate leaves up to 3.5 meters in length and 250-300 kg in weight Compatible with current sensing control panels Built-in physical stops and limit switches Electromechanical design for reliable operation Designed for residential use What's in the Box 2x Surf rams 1x Pair of photocells 1x Control board 2x Remote transmitters 1x Receiver 1x Antenna Specifications Model: SEA SURF350KIT Gate Compatibility: Up to 3.5 meters in length, 250-300 kg weight Limit Switches: Electronic and mechanical Control Panel Compatibility: Current sensing Operation: Electromechanical Usage: Residential

SEA AUTOMATION SEA SURF250KIT | Complete Swing Gate Kit | For Gates Up to 4.5m, 230V

Product Overview The SEA SURF250KIT is a complete swing gate kit designed for residential use, capable of handling gate leaves up to 4.5 meters in length and weighing between 250 to 300 kg. This kit includes everything needed for a reliable and efficient gate automation solution. Product Description The SURF250KIT provides a comprehensive set of components for swing gate automation. It includes two SURF 250 Electromechanical Operators, a SWING 2 DG electronic control unit with a 433 MHz receiver, and a Roll PLUS 433 MHz transmitter. Additionally, the kit features an antenna kit for the FLASH flashing light, an ASTER key button, a pair of SUNSET photocells, a flashing LED FLASH, and a warning sign. The operators are made from die-cast aluminum with a weather-resistant polyester paint finish, ensuring durability and long-lasting performance. The SURF 250 operators come with built-in physical stops and are compatible with current sensing control panels. The SURF 350 variant includes built-in limit switches for enhanced functionality. Key Features Complete swing gate kit for gates up to 4.5 meters in length Supports gate weights between 250 to 300 kg Includes 2 SURF 250 Electromechanical Operators SWING 2 DG electronic control unit with 433 MHz receiver Roll PLUS 433 MHz transmitter Antenna kit for FLASH flashing light ASTER key button Pair of SUNSET photocells Flashing LED FLASH Warning sign included Die-cast aluminum body with weather-resistant polyester paint Built-in physical stops (included with 350) Built-in limit switches (350 only) Electromechanical operation Designed for residential use What's in the Box 2 pcs SURF 250 Electromechanical Operators 1 pc SWING 2 DG electronic control unit and 433 MHz receiver 1 pc Roll PLUS 433 MHz transmitter 1 pc Antenna Kit for FLASH flashing light 1 pc ASTER key button 1 pc pair of SUNSET photocells 1 pc Flashing LED FLASH 1 pc Warning sign Specifications Model: SEA SURF250KIT Gate Compatibility: Up to 4.5 meters in length, 250 to 300 kg weight Motor Voltage: 230 V Body Material: Die-cast aluminum Finish: Weather-resistant polyester paint Control Unit: SWING 2 DG electronic control unit with 433 MHz receiver Transmitter: Roll PLUS 433 MHz Additional Features: Built-in physical stops, limit switches (350 only) Photocells: SUNSET pair LED Light: FLASH Usage: Residential

TOUSEK AUTOMATION Swing 265 AEB 29N Hydraulic Operator Kit S12707 | 230V | Up to 600kg, 2.5m Gates

Product Overview The Swing 265 AEB 29N Hydraulic Operator Kit S12707 is designed for swing gates up to 2.5 meters in width and 600 kilograms in weight. This powerful operator offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 265 AEB 29N Hydraulic Operator provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the operator is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The operator is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The operator supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 600 kg and a width of up to 2.5 m, this operator delivers reliable performance. The operator operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 600 kg and 2.5 m in width. What's in the Box 2 x Swing 265 AEB 29N Hydraulic Operators inclusive of installation material 1 x Control ST 50 1 x Radio receiver RS 868 2 channel 1 x Hand transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Light barrier of LS 41 Specifications Max Gate Wing Weight: 600 kg Max Gate Wing Width: 2.5 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 40%

TOUSEK AUTOMATION Swing 225 AEB/29N Hydraulic Operator Kit S12706 | 230V | Up to 400kg, 1.8m Gates

Product Overview The Swing 225 AEB/29N Hydraulic Operator Kit S12706 is designed for swing gates up to 1.8 meters in width and 400 kilograms in weight. This powerful operator offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 225 AEB/29N Hydraulic Operator provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the operator is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The operator is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The operator supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 400 kg and a width of up to 1.8 m, this operator delivers reliable performance. The operator operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 400 kg and 1.8 m in width. What's in the Box 2 x Swing 225 AEB/29N Hydraulic Operators inclusive of installation material 1 x Control ST 50 1 x Radio receiver RS 868 2 channel 1 x Hand transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Light barrier of LS 40 Specifications Max Gate Wing Weight: 400 kg Max Gate Wing Width: 1.8 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 30%

TOUSEK AUTOMATION SpinS12705 Electro-Mechanical Operator Kit | 230V | Up to 200kg, 2.5m Gates

Product Overview The SpinS12705 Electro-Mechanical Operator Kit is designed for gates up to 2.5 meters in width and 200 kilograms in weight. This kit includes all necessary components for efficient and reliable gate automation, featuring a 230V electromechanical joint arm drive for smooth operation. Product Description The SpinS12705 Electro-Mechanical Operator Kit offers a comprehensive solution for automating swing gates. With a maximum gate wing weight of 200 kg and a width of up to 2.5 m, this kit provides robust performance. The electromechanical joint arm drive ensures smooth motion, while the self-impeding feature blocks the gate for added security. An integrated final switch and simple emergency release with a box spanner enhance functionality and ease of use. The control ST51 allows direct adjustment of opening and closing strength, ensuring precise control over gate movements. The gentle stop feature, in combination with control ST50, provides a smooth operation. The kit supports an aperture angle of up to 120 degrees and a piston stroke/rotational speed of 9°/sec, with a maximum thrust/torque of 400 Nm. The kit includes two SPIN operators, control unit ST51, a two-channel radio receiver, a four-channel remote transmitter, a keyswitch with synthetic material and three keys, and a photocell LS 40. Key Features Electromechanical Joint Arm Drive: Provides smooth and reliable gate operation. Self-Impedance: Blocks the gate for enhanced security. Integrated Final Switch: Simplifies installation and operation. Emergency Release: Simple emergency release with a box spanner. Adjustable Strength: Direct adjustment of opening and closing strength via control unit ST51. Gentle Stop Feature: Ensures smooth stopping in combination with control ST50. Wide Aperture Angle: Supports up to 120 degrees of gate opening. Robust Construction: Suitable for gates up to 200 kg and 2.5 m width. What's in the Box 2 x SPIN operators incl. installation material 1 x Control unit ST51 1 x Radio receiver RS 868 2 channel 1 x Remote transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Photocell LS 40 Specifications Max Gate Wing Weight: 200 kg Max Gate Wing Width: 2.5 m Engine Tension: 230 V Piston Stroke/Rotational Speed: 9°/sec Max Thrust/Torque: 400 Nm Max Aperture Angle: 120 degrees Switching Duration: 20/day

TOUSEK AUTOMATION Swing X4LH Single Kit 12721 | 230V Motor | Up to 4.5m Gates | 500Kg Capacity

Product Overview The Swing X4LH Single Kit 12721 is designed for swing gates up to 4.5 meters in length and 500 kilograms in weight. This robust kit includes a 230V motor, ensuring reliable and powerful operation. The kit comes complete with all necessary components for a smooth and efficient installation. Product Description The Swing X4LH Single Kit 12721 is engineered for swing gates up to 4.5 meters and 500 kilograms. It features a powerful 230V motor with a maximum shear force of 5,000N and a stroke length of 450mm. The motor operates at a speed of 11mm/s and provides a 120-degree opening angle. This kit includes a control unit ST 61, a receiver RS 868 2 channel, two transmitters RS 868 TXR-2B 2 channel, a signal lamp L.E.D, and a pair of photocells LS 41. The motor-gear unit is designed for reliable power transmission and maximum stability, while the high-quality materials ensure long-term operation. Integrated limit stops facilitate easier installation, and the comfortable emergency release feature enhances user convenience. The smart Plug & Play controls offer maximum operating comfort, and the standard soft stop ensures smooth gate movement. The ARS Automatic Reversal System provides maximum safety, and the clever mounting design allows for smooth motion. Key Features High Capacity: Suitable for gates up to 4.5 meters and 500 kilograms. Powerful Motor: 230V motor with a maximum shear force of 5,000N. Efficient Operation: Motor speed of 11mm/s with a 120-degree opening angle. Integrated Limit Stops: Simplifies the installation process. Emergency Release: Provides comfortable and easy manual operation in case of power failure. Plug & Play Controls: Ensures maximum operating comfort. Soft Stop Feature: Allows for smooth and gentle gate movement. Automatic Reversal System: Enhances safety by reversing the gate's motion when an obstacle is detected. High-Quality Materials: Ensures long-term durability and reliable operation. Clever Mounting Design: Facilitates smooth and efficient gate motion. What's in the Box 1 x Motor plus mounting equipment 1 x Control unit ST 61 1 x Receiver RS 868 2 channel 2 x Transmitters RS 868 TXR-2B 2 channel 1 x Signal lamp L.E.D 1 x Pair of photocells LS 41 Specifications Gate Weight Capacity: Up to 500Kg Gate Length Capacity: Up to 4.5m Motor Power: 230V Motor Speed: 11mm/s Maximum Shear Force: 5,000N Stroke Length: 450mm Opening Angle: 120 degrees

TOUSEK AUTOMATION Swing X4 Single Gate Kit 12704 | 230V Motor | Up to 4m Gates | 500Kg Capacity

Product Overview The Swing X4 Single Gate Kit 12704 is designed for swing gates up to 4 meters in length and 500 kilograms in weight. This robust kit includes a 230V motor, ensuring reliable and powerful operation. The kit comes complete with all necessary components for a smooth and efficient installation. Product Description The Swing X4 Single Gate Kit 12704 is engineered for swing gates up to 4 meters and 500 kilograms. It features a powerful 230V motor with a maximum shear force of 5,000N and a stroke length of 320mm. The motor operates at a speed of 11mm/s and provides a 110-degree opening angle. This kit includes a control unit ST 61, a receiver RS 868 2 channel, two transmitters RS 868 TXR-2B 2 channel, a signal lamp L.E.D, and a pair of photocells LS 41. The motor-gear unit is designed for reliable power transmission and maximum stability, while the high-quality materials ensure long-term operation. Integrated limit stops facilitate easier installation, and the comfortable emergency release feature enhances user convenience. The smart Plug & Play controls offer maximum operating comfort, and the standard soft stop ensures smooth gate movement. The ARS Automatic Reversal System provides maximum safety, and the clever mounting design allows for smooth motion. Key Features High Capacity: Suitable for gates up to 4 meters and 500 kilograms. Powerful Motor: 230V motor with a maximum shear force of 5,000N. Efficient Operation: Motor speed of 11mm/s with a 110-degree opening angle. Integrated Limit Stops: Simplifies the installation process. Emergency Release: Provides comfortable and easy manual operation in case of power failure. Plug & Play Controls: Ensures maximum operating comfort. Soft Stop Feature: Allows for smooth and gentle gate movement. Automatic Reversal System: Enhances safety by reversing the gate's motion when an obstacle is detected. High-Quality Materials: Ensures long-term durability and reliable operation. Clever Mounting Design: Facilitates smooth and efficient gate motion. What's in the Box 1 x Motor plus mounting equipment 1 x Control unit ST 61 1 x Receiver RS 868 2 channel 2 x Transmitters RS 868 TXR-2B 2 channel 1 x Signal lamp L.E.D 1 x Pair of photocells LS 41 Specifications Gate Weight Capacity: Up to 500Kg Gate Length Capacity: Up to 4m Motor Power: 230V Motor Speed: 11mm/s Maximum Shear Force: 5,000N Stroke Length: 320mm Opening Angle: 110 degrees

TOUSEK AUTOMATION Swing X3LH Single Kit 12703 | 230V Motor | Up to 3m Gates | 500Kg Capacity

Product Overview The Swing X3LH Single Kit 12703 is designed for swing gates up to 3 meters in length and 500 kilograms in weight. This robust kit includes a 230V motor, ensuring reliable and powerful operation. The kit comes complete with all necessary components for a smooth and efficient installation. Product Description The Swing X3LH Single Kit 12703 is engineered for swing gates up to 3 meters and 500 kilograms. It features a powerful 230V motor with a maximum shear force of 4,000N and a stroke length of 320mm. The motor operates at a speed of 14.5mm/s and provides a 100-degree opening angle. This kit includes a control unit ST 61, a receiver RS 868 2 channel, two transmitters RS 868 TXR-2B 2 channel, a signal lamp L.E.D, and a pair of photocells LS 41. The motor-gear unit is designed for reliable power transmission and maximum stability, while the high-quality materials ensure long-term operation. Integrated limit stops facilitate easier installation, and the comfortable emergency release feature enhances user convenience. The smart Plug & Play controls offer maximum operating comfort, and the standard soft stop ensures smooth gate movement. The ARS Automatic Reversal System provides maximum safety, and the clever mounting design allows for smooth motion. Key Features High Capacity: Suitable for gates up to 3 meters and 500 kilograms. Powerful Motor: 230V motor with a maximum shear force of 4,000N. Efficient Operation: Motor speed of 14.5mm/s with a 100-degree opening angle. Integrated Limit Stops: Simplifies the installation process. Emergency Release: Provides comfortable and easy manual operation in case of power failure. Plug & Play Controls: Ensures maximum operating comfort. Soft Stop Feature: Allows for smooth and gentle gate movement. Automatic Reversal System: Enhances safety by reversing the gate's motion when an obstacle is detected. High-Quality Materials: Ensures long-term durability and reliable operation. Clever Mounting Design: Facilitates smooth and efficient gate motion. What's in the Box 1 x Motor plus mounting equipment 1 x Control unit ST 61 1 x Receiver RS 868 2 channel 2 x Transmitters RS 868 TXR-2B 2 channel 1 x Signal lamp L.E.D 1 x Pair of photocells LS 41 Specifications Gate Weight Capacity: Up to 500Kg Gate Length Capacity: Up to 3m Motor Power: 230V Motor Speed: 14.5mm/s Maximum Shear Force: 4,000N Stroke Length: 320mm Opening Angle: 100 degrees

TOUSEK AUTOMATION Swing X3 Single Kit 12702 | 230V Motor | Up to 3m Gates | 500Kg Capacity

Product Overview The Swing X3 Single Kit 12702 is designed for swing gates up to 3 meters in length and 500 kilograms in weight. This robust kit includes a 230V motor, ensuring reliable and powerful operation. The kit comes complete with all necessary components for a smooth and efficient installation. Product Description The Swing X3 Single Kit 12702 is engineered for swing gates up to 3 meters and 500 kilograms. It features a powerful 230V motor with a maximum shear force of 4,000N and a stroke length of 320mm. The motor operates at a speed of 14.5mm/s and provides a 100-degree opening angle. This kit includes a control unit ST 61, a receiver RS 868 2 channel, two transmitters RS 868 TXR-2B 2 channel, a signal lamp L.E.D, and a pair of photocells LS 41. The motor-gear unit is designed for reliable power transmission and maximum stability, while the high-quality materials ensure long-term operation. Integrated limit stops facilitate easier installation, and the comfortable emergency release feature enhances user convenience. The smart Plug & Play controls offer maximum operating comfort, and the standard soft stop ensures smooth gate movement. The ARS Automatic Reversal System provides maximum safety, and the clever mounting design allows for smooth motion. Key Features High Capacity: Suitable for gates up to 3 meters and 500 kilograms. Powerful Motor: 230V motor with a maximum shear force of 4,000N. Efficient Operation: Motor speed of 14.5mm/s with a 100-degree opening angle. Integrated Limit Stops: Simplifies the installation process. Emergency Release: Provides comfortable and easy manual operation in case of power failure. Plug & Play Controls: Ensures maximum operating comfort. Soft Stop Feature: Allows for smooth and gentle gate movement. Automatic Reversal System: Enhances safety by reversing the gate's motion when an obstacle is detected. High-Quality Materials: Ensures long-term durability and reliable operation. Clever Mounting Design: Facilitates smooth and efficient gate motion. What's in the Box 1 x Motor plus mounting equipment 1 x Control unit ST 61 1 x Receiver RS 868 2 channel 2 x Transmitters RS 868 TXR-2B 2 channel 1 x Signal lamp L.E.D 1 x Pair of photocells LS 41 Specifications Gate Weight Capacity: Up to 500Kg Gate Length Capacity: Up to 3m Motor Power: 230V Motor Speed: 14.5mm/s Maximum Shear Force: 4,000N Stroke Length: 320mm Opening Angle: 100 degrees

FAAC 230v hydraulic operator kit for swing gates 402 UK KIT

2 Year guarantee

FAAC Hydraulic operator kit for swing gates 422 UK KIT

2 Year guarantee

FAAC 400 UK KIT S | Hydraulic Single Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 UK KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 UK KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 UK KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 UK KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 UK KIT | Hydraulic Operator Double Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 UK KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 UK KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 UK KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SB KIT S | Hydraulic Single Kit for Swing Gates Up to 4m

Product Overview The FAAC 400 SB KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SB KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SB KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SB KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SB KIT | Hydraulic Operator Double Kit for Swing Gates Up to 4m

Product Overview The FAAC 400 SB KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SB KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 4 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SB KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SB KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SBS KIT S | Hydraulic Single Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 SBS KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SBS KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SBS KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SBS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SBS KIT | Hydraulic Operator Double Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 SBS KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SBS KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SBS KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SBS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

Electro Mechanical Operator with Articulated Arm for Swing Gates | FAAC 390 UK KIT | Up to 3m

Product Overview FAAC 390 UK KIT - Complete kit for a pair of residential swing gates up to a maximum of 3 meters each leaf. This kit is designed for quick and easy installation, providing a reliable and efficient solution for automating swing gates. Key Features Integrated open & close limits for precise control Specially designed for gates with large square pillars Control panel with LCD for simplified programming Quick & easy installation for existing hinged swing gates Manual release from outside in the event of a power failure or fault Product Description Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the limits of the gate travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to consult with us before ordering if this feature is critical to your installation. Designed for Large Pillars Specially designed for gates with large square pillars, the articulated arm can easily reach around the corner of the pillar of the gate without the need to modify any of the bracketry that is normally supplied with other equipment. LCD Display The control panel features an LCD for simplified programming, making the setup process straightforward and user-friendly. Quick & Easy Installation The FAAC 390 UK KIT is designed for the quick and easy installation of existing hinged swing gates, minimizing the time and effort required for setup. Manual Release from Outside In the event of a power failure or fault, the manual release from outside the property allows for convenient access. This feature is particularly useful when the gate is the only means of access to the property. Technical Specifications FeatureSpecification Max Gate Leaf Length 3 meters Control Panel LCD Display Manual Release Yes, from outside

FAAC 413 UK KIT S | Electro Mechanical Operator Kit for Swing Gates

Product Overview The FAAC 413 UK KIT S is a comprehensive electro mechanical operator kit designed for single residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes a 230V motor, control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 UK KIT S is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 230V electro mechanical operator for swing gates up to 2.5 meters Adjustable open and close limits Control board with LCD for simplified programming Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 UK KIT S is designed to provide robust and efficient automation for single swing gates. This 230V electro mechanical operator kit includes a motor capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gate, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 UK KIT S is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x FAAC 413 Motor 1x Control Board with LCD 1x Pair of Photocells 1x Plug-in Receiver/Decoder 2x Two-Channel Remote Transmitters Technical Specifications Product Code: FAAC 413 UK KIT S Power Supply: 230V Gate Type: Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motor, Control Board, Photocells, Receiver/Decoder, Remote Transmitters Control Board: LCD Display Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 UK KIT | Electro Mechanical Double Operator Kit for Swing Gates

Product Overview The FAAC 413 UK KIT is a comprehensive electro mechanical double operator kit designed for automating a pair of residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes two 230V motors, a control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 UK KIT is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 230V electro mechanical operator for swing gates up to 2.5 meters each Adjustable open and close limits Control board with LCD for simplified programming Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 UK KIT is designed to provide robust and efficient automation for double swing gates. This 230V electro mechanical operator kit includes two motors capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gates, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 UK KIT is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 2x FAAC 413 Motors 1x Control Board with LCD 1x Pair of Photocells 1x Plug-in Receiver/Decoder 2x Two-Channel Remote Transmitters Technical Specifications Product Code: FAAC 413 UK KIT Power Supply: 230V Gate Type: Double Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motors, Control Board, Photocells, Receiver/Decoder, Remote Transmitters Control Board: LCD Display Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC Electro mechanical operator double limit switch kit for swing gates 413 LS KIT

2 Year guarantee

FAAC 415 UK KIT S | Electro Mechanical Operator Single Kit for Swing Gates

Product Overview The FAAC 415 UK KIT S is a complete electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit features a 230V motor and an LCD control panel for simplified programming and operation. It is engineered for quick and easy installation on existing hinged swing gates, making it an ideal solution for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motor LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 UK KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor that ensures smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. It includes a plug-in receiver/decoder, making it compatible with various remote transmitters. The pair of photocells provided in the kit ensures safety by detecting obstacles and preventing the gate from closing when something is in the way. With its comprehensive components, the FAAC 415 UK KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V electro-mechanical motor 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 UK KIT | Twin Gate Kit 230V for Swing Gates Up to 3m, 300kg Per Gate

Product Overview The FAAC 415 UK KIT is a comprehensive electro-mechanical twin gate kit designed for residential and light commercial swing gates with leaves up to 3 meters each and a maximum weight of 300kg per gate. This kit includes all necessary components for effective and efficient gate automation, featuring a 230V motor and an LCD control panel for simplified programming and operation. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Twin operator kit for swing gates Suitable for gates up to 3 meters and 300kg per leaf 230V electro-mechanical motors LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 UK KIT is designed to provide robust and reliable automation for twin swing gates up to 3 meters in length and 300kg in weight per leaf. This kit includes powerful 230V electro-mechanical motors that ensure smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. It includes a plug-in receiver/decoder, making it compatible with various remote transmitters. The pair of photocells provided in the kit ensures safety by detecting obstacles and preventing the gate from closing when something is in the way. With its comprehensive components, the FAAC 415 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V electro-mechanical motors 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 LS KIT S | Electro Mechanical Operator Single Limit Switch Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 LS KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit includes everything needed for effective and efficient gate automation, featuring a limit switch for precise control and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motor with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LS KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 LS 230V Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LS KIT | Electro Mechanical Operator Double Limit Switch Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 LS KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 3 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, battery backup for mains power failure, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions and has built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motors with limit switch Battery backup available for power failures Slow down on open and close for precise operation LCD control panel for easy programming Built-in obstacle detection for safety Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LS KIT is designed to provide robust and reliable automation for double swing gates up to 3 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. This kit features a battery backup option, ensuring that the gates remain operational even during mains power failures, thus enhancing security and convenience. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. Designed for quick and easy installation, the FAAC 415 LS KIT is suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V electro-mechanical motors 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 L KIT S | Electro Mechanical Operator Single Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring an LCD control panel for simplified programming. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motor LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 L KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor that ensures smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V electro-mechanical motor 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 L KIT | Electro Mechanical Operator Double Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring an LCD control panel for simplified programming. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motors LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 L KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors that ensure smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC 415 L 230V Operators 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LLS KIT S | Electro Mechanical Operator Single Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 LLS KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motor with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LLS KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LLS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 LLS 230V Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LLS KIT | Electro Mechanical Operator Double Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 LLS KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motors with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LLS KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LLS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC 415 LLS 230V Operators 1 x FAAC 455D Control Board 1 x Pair of Photocells 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters Installation manual and hardware