GIBIDI KIT TOP EVO | Hydraulic Operator Kit for Gates up to 6m (230V)

Product Overview KIT TOP EVO - Hydraulic Operator Kit for Gates up to 6 meters (230V) is designed for heavy, medium, and large size swing gates. Suitable for both residential and intensive use, this 230 Vac hydraulic operators kit offers reliable and efficient performance. Key Features Easy to install with preloaded and factory adjusted components Silent and fast with hydraulic slowdowns in the last 3cm of rod travel Technologically advanced with vacuum loading process to prevent condensation and emulsion New die-cast aluminium back-end and torque settings valves Suitable for gates from small residential to large commercial or industrial types Product Description EASY TO INSTALL TOP EVO is already preloaded and factory adjusted, ready for use, with no purge valves or oil to top up. Mounting brackets supplied. SILENT AND FAST Extremely silent and fast. Hydraulic slowdowns integrated in the last 3cm of rod travel. TECHNOLOGICAL AND SAFE Built with unique technology; the vacuum loading process leaves no air residues inside, preventing condensation and emulsion. The pump-distributor coupling is without any gasket, a unique system destined to remain unchanged over time. New die-cast aluminium back-end. Complete with torque settings valves and the new embedded device to select the reversible, irreversible, or mixed mode. A COMPLETE AND RELIABLE RANGE From a small residential gate to 6-meter doors of a commercial or industrial type, this kit includes special motors for intensive use. Specifications FeatureTOP291E - ER - ER/STOP391E - ER - ER/STOP441E - ER - ER/S Type of use Heavy Duty Heavy Duty Heavy Duty Frequency of use 55% 55% 55% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz Absorbed power 170W 190W 190W Degree of protection IP65 IP65 IP65 Rod speed 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) Max rod stroke 265 mm (290 mm for E) 265 mm (290 mm for E) 425 mm (440 mm for E) Max thrust force 3000 N (2200 N for ER/S) 4500 N (3000 N for ER/S) 4500 N (3000 N for ER/S) Force adjustment Hydraulic Hydraulic Hydraulic Speed adjustment Electronic ** Electronic ** Electronic ** Hydraulic slowdown Yes (No for E) Yes (No for E) Yes (No for E) Max leaf length 3.5 m * 4.5 m * 6.0 m * Operating temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C Rod diameter 16 mm 20 mm 20 mm Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Operator weight 7.7 Kg 8.7 Kg 10 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary. ** By the use of the BA230 control board What's in the Box ComponentQuantity TOP EVO according operator 2 AS06320 for 1 or 2 motors (F4) 1 AU02910 2 channels plug-in receiver board for control units 1 70710 complete flashing lamp device DSL70710 230 Vdc 1 AU03100 MAKO remote control 433Mhz 2 AU01940 wall mounted key selector model DCS100 1 AU02250 pair of DCF180 wall mounted photocells 1 AJ75800 gate warning plate 1

FADINI KIT DARDO 430 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 430 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 430 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vdc operators (F/430L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 43 control unit (F/4300L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/430L - 230 Vdc operator 1x F/4300L - ELPRO 43 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI KIT NUPI 66 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT NUPI 66 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT NUPI 66 is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/661L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 7 RP control unit (F/6610L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/6660K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/107L - TRIFO 11 pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/6661K0VL 2x F/661L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/6610L - ELPRO 7 RP control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI HINDI 880 SPRINT KIT | Swing Gate Operator | 400 kg, 2.3 m

Product Overview The FADINI HINDI 880 SPRINT KIT is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 400 kg in weight and 2.3 m in length 230 Vac oil-hydraulic operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI HINDI 880 SPRINT KIT is designed to automate swing gates with ease and reliability. This kit includes two powerful 230 Vac oil-hydraulic operators (F/888L) that provide secure locking in the closed position, ensuring that your gates remain secure when not in use. The included ELPRO 27 control unit (F/7047L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of TRIFO 11 surface mount photocells (F/107L) to detect obstacles and prevent accidents. Remote operation is made simple with the two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential and commercial swing gate automation. Kit Contents 2x F/888L - 230 Vac oil-hydraulic operator, locking in closed position 1x F/7047L - ELPRO 27 control unit 1x F/107L - TRIFO 11 pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

CAME KRONO-S5S KIT | 230V Left-Handed Swing Gate Operator Kit for Single Gate up to 5m, 1000kg

Product Overview The CAME KRONO-S5S Kit is an all-inclusive solution for single left-hand residential swing gates, designed for gates up to 5m in width or 1000kg in weight per leaf. The left-hand version is determined by looking from the back of your gate, with the post and motor on the left-hand side. Key Features Integrated Open & Close Limits: Adjustable open and close limits allow setting the gate's travel limits without the need for ground stops. Note: May not function correctly on gates over 1.8m in width. Quick & Easy Installation: Designed for swift installation on existing hinged swing gates. Complete Kit: Includes all necessary components for a fully functional gate automation system. Durable and Reliable: Electromechanical motor ensures long-lasting performance. Safety Photocells: Provides additional safety by detecting obstacles in the path of the gate. Locking Motor: Mechanically locking motor for enhanced security. Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 34 Seconds for 90° Duty Cycle: Semi-Intensive What's in the Box? 1x CAME KR510S 230v Left Hand Motor 1x CAME AF43S Frequency Card 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZA3N Control Panel 2x CAME TOP-432EE Radio Remotes 1x CAME TOP-A433N Antenna

CAME KRONO-S5D KIT | 230V Right-Handed Swing Gate Operator Kit for Single Gate up to 5m, 1000kg

Product Overview The CAME KRONO-S5D Kit is an all-inclusive solution for single right-hand residential swing gates, designed for gates up to 5m in width or 1000kg in weight per leaf. The right-hand version is determined by looking from the back of your gate, with the post and motor on the right-hand side. Key Features Integrated Open & Close Limits: Adjustable open and close limits allow setting the gate's travel limits without the need for ground stops. Note: May not function correctly on gates over 1.8m in width. Quick & Easy Installation: Designed for swift installation on existing hinged swing gates. Complete Kit: Includes all necessary components for a fully functional gate automation system. Durable and Reliable: Electromechanical motor ensures long-lasting performance. Safety Photocells: Provides additional safety by detecting obstacles in the path of the gate. Locking Motor: Mechanically locking motor for enhanced security. Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 34 Seconds for 90° Duty Cycle: Semi-Intensive What's in the Box? 1x CAME KR510D 230v Right Hand Motor 1x CAME AF43S Frequency Card 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZA3N Control Panel 2x CAME TOP-432EE Radio Remotes 1x CAME TOP-A433N Antenna

CAME KRONO-P5 KIT | 230V Swing Gate Operator Kit for Pair of Gates up to 5m, 1000kg

Product Overview The CAME KRONO-P5 Kit is an all-inclusive solution for residential swing gates, designed for gates up to 5m in width or 1000kg in weight per leaf. This kit ensures top-notch performance with easy installation, making it a preferred choice for residential settings. Key Features Quick & Easy Installation: Designed for swift installation on existing hinged swing gates. Complete Kit: Includes all necessary components for a fully functional gate automation system. Durable and Reliable: Electromechanical motors ensure long-lasting performance. Safety Photocells: Provides additional safety by detecting obstacles in the path of the gate. Locking Motor: Mechanically locking motor for enhanced security. Flashing Light: Includes a flashing light for added visibility and safety during gate operation. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 34 Seconds for 90° Duty Cycle: Semi-Intensive What's in the Box? 1x CAME KR510S 230v Left Hand Motor 1x CAME KR510D 230v Right Hand Motor 1x CAME AF43S Frequency Card 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZA3N Control Panel 2x CAME TOP-432EE Radio Remotes 1x CAME TOP-A433N Antenna

CAME KRONO-P310 KIT | 230V Swing Gate Operator Kit with Limit Switches for Pair of Gates up to 3m, 800kg

Product Overview The CAME KRONO-P310 Kit is an all-inclusive solution for residential swing gates, designed for gates up to 3m in width or 800kg in weight per leaf. This kit features integrated open and close limits, ensuring precise gate operation without the need for physical stops in the ground, making it a preferred choice for residential settings. Key Features Integrated Open & Close Limits: Adjustable limits for smooth and precise gate operation. Note: May not function correctly on gates wider than 1.8m. Quick & Easy Installation: Designed for swift installation on existing hinged swing gates. Complete Kit: Includes all necessary components for a fully functional gate automation system. Durable and Reliable: Electromechanical motors ensure long-lasting performance. Safety Photocells: Provides additional safety by detecting obstacles in the path of the gate. Flashing Light: Includes a flashing light for added visibility and safety during gate operation. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 22 Seconds for 90° Duty Cycle: Semi-Intensive What's in the Box? 1x CAME KR310S 230v Left Hand Motor 1x CAME KR310D 230v Right Hand Motor 1x CAME AF43S Frequency Card 1x CAME DIR-10 Pair of Safety Photocells 1x CAME KIARON Flashing Light 1x CAME ZA3N Control Panel 2x CAME TOP-432EE Radio Remotes 1x CAME TOP-A433N Antenna

CAME KRONO-P3 KIT | 230V Swing Gate Operator Kit for Pair of Gates up to 3m, 800kg

Product Overview The CAME KRONO-P3 Kit is an all-inclusive solution for residential swing gates, designed for gates up to 3m in width or 800kg in weight per leaf. This kit ensures a quick and easy installation, making it a preferred choice for residential settings. Key Features Quick & Easy Installation: Designed for swift installation on existing hinged swing gates. Complete Kit: Includes all necessary components for a fully functional gate automation system. Durable and Reliable: Electromechanical motors ensure long-lasting performance. Safety Photocells: Provides additional safety by detecting obstacles in the path of the gate. Flashing Light: Includes a flashing light for added visibility and safety during gate operation. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 22 Seconds for 90° Duty Cycle: Semi-Intensive What's in the Box? 1x CAME KR300S 230v Left Hand Motor 1x CAME KR300D 230v Right Hand Motor 1x CAME AF43S Frequency Card 1x CAME DIR-10 Pair of Safety Photocells 1x CAME KIARON Flashing Light 1x CAME ZA3N Control Panel 2x CAME TOP-432EE Radio Remotes 1x CAME TOP-A433N Antenna

CAME Frog-PAV 230v Fast Kit | Pair of Swing Gates | Up to 1.3m Leaf, 300kg

Product Overview The CAME Frog-PAV Kit offers a comprehensive solution for residential or apartment block swing gates, accommodating gates up to 1.3m in width or 300kg per leaf. This fast version kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level. Key Features Ultimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards. Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point. Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width. 3 Year Warranty: Confidence in quality with a 3-year warranty on all CAME electrical components. Fast Motor: Ensures quick operation with a gate speed of 9 seconds for 90 degrees. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 300Kg Max Length Per Gate: 1300mm Above Or Underground: Underground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 9 seconds - 90° Duty Cycle: 30 Cycles/Hour What's in the Box? 2x CAME FROG-AV 230v Motors 2x CAME FROG-CFN Foundation Cases 2x CAME A4364 Release Mechanisms 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZA3P Control Panel 2x CAME TOPD4FKS Radio Remotes - 806TS-0102 1x CAME TOP-A433N Antenna 1x CAME AF43S Frequency Card

CAME FERNIEV-S KIT | Rapid Articulated Arm Swing Gate Kit | Up to 4m, 230v

Product Overview The CAME FERNIEV-S KIT is a complete rapid articulated arm swing gate kit designed for residential or apartment block settings with large pillar gates, supporting a single gate up to a maximum width of 4 meters or 800kg in weight per leaf. This kit includes a powerful 230v motor and is designed for quick and easy installation on existing hinged swing gates. Key Features Adjustable slow down on open and close positions LCD display on the control panel for simplified programming Designed for large pillars with articulated arms to reach around corners Built-in obstacle detection for enhanced safety Quick and easy installation on existing hinged swing gates Supports gates up to 4 meters wide or 800kg per leaf 230v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Fast motor with a gate speed of 18 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 30 cycles/hour CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME FERNIEV-S KIT is an ideal solution for automating swing gates in residential and apartment block settings, particularly those with large square pillars. This complete kit includes a powerful 230v motor capable of handling gates up to 4 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Slow Down on Open and Close The CAME FERNIEV-S KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Designed for Large Pillars This kit is especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gate's pillar without the need to modify any of the bracketry that is normally supplied with other equipment. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The motor in this kit is designed to be fast, offering a gate speed of 18 seconds for a 90-degree opening, ensuring efficient and timely access. What's in the Box? 1 CAME FE40230V 230v Motor 1 CAME AF43S Frequency Card 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZM3EZ Control Panel 2 CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Above Ground Max Opening Angle: 90 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 18 Seconds 90 Degrees Duty Cycle: 30 Cycles/Hour Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME FERNIEV-P KIT | Rapid Articulated Arm Swing Gate Kit | Up to 4m, 230v

Product Overview The CAME FERNIEV-P KIT is a complete rapid articulated arm swing gate kit designed for residential or apartment block settings with large pillar gates, supporting a pair of gates up to a maximum width of 4 meters or 800kg in weight per leaf. This kit includes powerful 230v motors and is designed for quick and easy installation on existing hinged swing gates. Key Features Adjustable slow down on open and close positions LCD display on the control panel for simplified programming Designed for large pillars with articulated arms to reach around corners Built-in obstacle detection for enhanced safety Quick and easy installation on existing hinged swing gates Supports gates up to 4 meters wide or 800kg per leaf 230v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Fast motor with a gate speed of 18 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 30 cycles/hour CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME FERNIEV-P KIT is an ideal solution for automating swing gates in residential and apartment block settings, particularly those with large square pillars. This complete kit includes two powerful 230v motors capable of handling gates up to 4 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Slow Down on Open and Close The CAME FERNIEV-P KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Designed for Large Pillars This kit is especially designed for gates with large square pillars. The articulated arm can easily reach around the corner of the gate's pillar without the need to modify any of the bracketry that is normally supplied with other equipment. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The motors in this kit are designed to be fast, offering a gate speed of 18 seconds for a 90-degree opening, ensuring efficient and timely access. What's in the Box? 2 CAME FE40230V 230v Motors 1 CAME AF43S Frequency Card 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZM3EZ Control Panel 2 CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Above Ground Max Opening Angle: 90 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 18 Seconds 90 Degrees Duty Cycle: 30 Cycles/Hour Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME ATS-S5 ELECTRIC GATE KIT | Single Swing Gate Kit | Up to 5m, 230v

Product Overview The CAME ATS-S5 ELECTRIC GATE KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 5 meters or 1000kg in weight. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Adjustable open and close limits without the need for a physical stop Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg 230v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Gate speed of 20 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour IP 44 protection rating for durability Product Description The CAME ATS-S5 ELECTRIC GATE KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 230v motor capable of handling gates up to 5 meters wide or 1000kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 5 meters in width or 1000kg in weight, making it suitable for a wide range of residential and apartment block applications. Reliable Motor Equipped with a 230v electromechanical motor, the CAME ATS-S5 ELECTRIC GATE KIT ensures reliable and efficient operation. The motor is designed for intensive use, with a duty cycle of up to 20 cycles per hour. Mechanically Locking Motor The motor features a mechanically locking system, providing enhanced security by ensuring the gate remains securely closed when not in operation. Gate Speed The motor offers a gate speed of 20 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 1 CAME ATS50AGS 230v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 230v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 20 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-S3 ELECTRIC GATE KIT | Single Swing Gate Kit | Up to 3m, 230v

Product Overview The CAME ATS-S3 ELECTRIC GATE KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 3 meters or 800kg in weight. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Adjustable open and close limits without the need for a physical stop Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg 230v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Gate speed of 15 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour IP 44 protection rating for durability Product Description The CAME ATS-S3 ELECTRIC GATE KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 230v motor capable of handling gates up to 3 meters wide or 800kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight, making it suitable for a wide range of residential and apartment block applications. Reliable Motor Equipped with a 230v electromechanical motor, the CAME ATS-S3 ELECTRIC GATE KIT ensures reliable and efficient operation. The motor is designed for intensive use, with a duty cycle of up to 20 cycles per hour. Mechanically Locking Motor The motor features a mechanically locking system, providing enhanced security by ensuring the gate remains securely closed when not in operation. Gate Speed The motor offers a gate speed of 15 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 1 CAME ATS30AGS 230v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 230v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 15 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-P5 ELECTRIC GATE KIT | Swing Gate Kit | Up to 5m, 230v, Twin Gate

Product Overview The CAME ATS-P5 ELECTRIC GATE KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 5 meters or 1000kg in weight per leaf. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Adjustable open and close limits without the need for a physical stop Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg per leaf 230v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Gate speed of 20 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour IP 44 protection rating for durability Product Description The CAME ATS-P5 ELECTRIC GATE KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 230v motors capable of handling gates up to 5 meters wide or 1000kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 5 meters in width or 1000kg in weight per leaf, making it suitable for a wide range of residential and apartment block applications. Reliable Motors Equipped with two 230v electromechanical motors, the CAME ATS-P5 ELECTRIC GATE KIT ensures reliable and efficient operation. The motors are designed for intensive use, with a duty cycle of up to 20 cycles per hour. Mechanically Locking Motor The motors feature a mechanically locking system, providing enhanced security by ensuring the gates remain securely closed when not in operation. Gate Speed The motors offer a gate speed of 20 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 2 CAME ATS50AGS 230v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 230v Control Panel 2 4-button Radio Remotes - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 20 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-P3 ELECTRIC GATE KIT | Swing Gate Kit | Up to 3m, 230v, Twin Gate

Product Overview The CAME ATS-P3 ELECTRIC GATE KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 3 meters or 800kg in weight per leaf. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Adjustable open and close limits without the need for a physical stop Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg per leaf 230v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Gate speed of 15 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour IP 44 protection rating for durability Product Description The CAME ATS-P3 ELECTRIC GATE KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 230v motors capable of handling gates up to 3 meters wide or 800kg in weight per leaf. The system features adjustable open and close limits, eliminating the need for physical stops in the ground. It is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight per leaf, making it suitable for a wide range of residential and apartment block applications. Reliable Motors Equipped with two 230v electromechanical motors, the CAME ATS-P3 ELECTRIC GATE KIT ensures reliable and efficient operation. The motors are designed for intensive use, with a duty cycle of up to 20 cycles per hour. Mechanically Locking Motor The motors feature a mechanically locking system, providing enhanced security by ensuring the gates remain securely closed when not in operation. Gate Speed The motors offer a gate speed of 15 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 2 CAME ATS30AGS 230v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 230v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 15 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATI-S3 KIT | Single Swing Gate Kit | Up to 3m, 230v

Product Overview The CAME ATI-S3 KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 3 meters or 800kg in weight. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg 230v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Gate speed of 32 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-S3 KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 230v motor capable of handling gates up to 3 meters wide or 800kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight, making it suitable for a wide range of residential and apartment block applications. Reliable Motor Equipped with a 230v electromechanical motor, the CAME ATI-S3 KIT ensures reliable and efficient operation. The motor is designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motor features a mechanically locking system, providing enhanced security by ensuring the gate remains securely closed when not in operation. Gate Speed The motor offers a gate speed of 32 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 1 CAME A3000A 230v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZA3P Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 32 Seconds 90 Degrees Duty Cycle: 50 Cycles/Hour Protection Rating: IP 44

CAME ATI-P3 KIT | Swing Gate Kit | Up to 3m, 230v, Twin Gate

Product Overview The CAME ATI-P3 KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 3 meters or 800kg in weight per leaf. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg per leaf 230v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Gate speed of 32 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-P3 KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 230v motors capable of handling gates up to 3 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight per leaf, making it suitable for a wide range of residential and apartment block applications. Reliable Motors Equipped with two 230v electromechanical motors, the CAME ATI-P3 KIT ensures reliable and efficient operation. The motors are designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motors feature a mechanically locking system, providing enhanced security by ensuring the gates remain securely closed when not in operation. Gate Speed The motors offer a gate speed of 32 seconds for a 90-degree opening, ensuring efficient and timely access. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 2 CAME A3000A 230v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZA3P Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 32 Seconds 90 Degrees Duty Cycle: 50 Cycles/Hour Protection Rating: IP 44

FAAC 413 LS KIT S Swing Gate Operator Kit - Single Gate

Product Overview The FAAC 413 LS KIT S is a comprehensive single gate operator kit designed for residential and light commercial swing gates, accommodating up to 2.5m per leaf. Key Features Complete kit for a single swing gate Suitable for residential and light commercial applications Maximum gate weight per leaf: 200kg Maximum gate length per leaf: 2500mm Above ground installation Electromechanical motor with mechanically locking method Power supply voltage: 230v Motor voltage: 230v Gate speed: 15 seconds for 90 degrees Duty cycle: 30 cycles per hour Protection rating: IP44 (resistant to dust and water splashes) Kit Contents 1 x FAAC 413 LS 230v Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in Receiver/Decoder 2 x FAAC 868 SLH 2-Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Additional Features Adjustable speed control for opening and closing Integrated open and close limits for easy setup LCD display on control panel for simplified programming Quick and easy installation on existing swing gates Compatibility and Application The FAAC 413 LS KIT S is ideal for enhancing the functionality and security of single swing gates in residential and light commercial settings. It provides reliable operation, ease of installation, and essential features for automated gate systems.

CAME Fast70-S Kit | Single Swing Gate | Up to 2.3m Width, 200kg per Leaf

Product Overview The CAME Fast70-S Kit is a complete solution for single residential or condominium swing gate applications on medium and large-sized pillars. This kit supports gates up to 2.3 meters in width or 200kg in weight per leaf, providing robust and reliable automation for your gate system. Key Features Supports swing gates up to 2.3 meters in width or 200kg per leaf Slow down feature for smooth opening and closing Control panel with LCD display for simplified programming Designed for large pillars with an articulated arm for easy corner access Quick and easy installation to existing hinged swing gates CAME Cloud Technology for remote monitoring and control Product Description The CAME Fast70-S Kit integrates advanced features to ensure smooth and efficient gate operation. The slow down feature allows you to adjust the speed of your gate as it approaches the open and closed positions, providing a refined and personalized touch to your installation. The control panel with LCD display simplifies programming and diagnostics, making setup straightforward. This kit is particularly suited for gates with large square pillars, thanks to its articulated arm that can easily reach around the corner without requiring modifications to the bracketry. Quick and easy installation is ensured, allowing you to upgrade your existing hinged swing gates with minimal effort. With CAME Cloud Technology, you can enjoy full control of your gate system from anywhere. Monitor your video entry system, receive audio/video calls, and open your gate remotely using the XIP mobile app, available on the App Store and Google Play. Specifications Model FA70230CB Protection rating (IP) 54 Power supply (V - 50/60 Hz) 230 AC Power supply to motor (V) 230 AC Absorption (A) 1.4 Power (W) 160 Maneuvering time at 90° (s) 15 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Kit Content FA70230CB: Irreversible 230V gearmotor with control board, functions display, on-board radio decoding, and hinged transmission arm for swing gates up to 2.3m leaves and 200kg weight. 1001AF43S: 433.92 MHz plug-in radio frequency card. 2806TS-0122: TOPD4RKS - Double frequency 4-button rolling code transmitter, black color. 1001TOP-A433N: Antenna tuned at 433.92 MHz. 1001DIR10: Pair of 12-24V AC-DC outdoor photocells with a range of 10m. Advanced Technology The Fast70-S kit features CAME Cloud Technology, allowing you to monitor and control your gate system remotely. Using the XIP mobile app, available on both the App Store and Google Play, you can receive audio/video calls from your entry panel and open your gate from anywhere. Applications This gearmotor kit is suitable for single swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation.

CAME Fast70-P Kit | Pair of Swing Gates | Up to 2.3m Width, 200kg per Leaf

Product Overview The CAME Fast70-P Kit is a complete solution for residential or condominium swing gate applications on medium and large-sized pillars. This kit supports gates up to 2.3 meters in width or 200kg in weight per leaf, providing robust and reliable automation for your gate system. Key Features Supports swing gates up to 2.3 meters in width or 200kg per leaf Slow down feature for smooth opening and closing Control panel with LCD display for simplified programming Designed for large pillars with an articulated arm for easy corner access Quick and easy installation to existing hinged swing gates CAME Cloud Technology for remote monitoring and control Product Description The CAME Fast70-P Kit integrates advanced features to ensure smooth and efficient gate operation. The slow down feature allows you to adjust the speed of your gate as it approaches the open and closed positions, providing a refined and personalized touch to your installation. The control panel with LCD display simplifies programming and diagnostics, making setup straightforward. This kit is particularly suited for gates with large square pillars, thanks to its articulated arm that can easily reach around the corner without requiring modifications to the bracketry. Quick and easy installation is ensured, allowing you to upgrade your existing hinged swing gates with minimal effort. With CAME Cloud Technology, you can enjoy full control of your gate system from anywhere. Monitor your video entry system, receive audio/video calls, and open your gate remotely using the XIP mobile app, available on the App Store and Google Play. Specifications Model FA70230CB, FA70230 Protection rating (IP) 54 Power supply (V - 50/60 Hz) 230 AC Power supply to motor (V) 230 AC Absorption (A) 1.4 Power (W) 160 Maneuvering time at 90° (s) 15 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Kit Content FA70230CB: Irreversible 230V gearmotor with control board, functions display, on-board radio decoding, and hinged transmission arm for swing gates up to 2.3m leaves and 200kg weight. FA70230: Irreversible 230V gearmotor with hinged transmission arm for swing gates up to 2.3m leaves and 200kg weight. 1001AF43S: 433.92 MHz plug-in radio frequency card. 2806TS-0122: TOPD4RKS - Double frequency 4-button rolling code transmitter, black color. 1001TOP-A433N: Antenna tuned at 433.92 MHz. 1001DIR10: Pair of 12-24V AC-DC outdoor photocells with a range of 10m. Advanced Technology The Fast70-P kit features CAME Cloud Technology, allowing you to monitor and control your gate system remotely. Using the XIP mobile app, available on both the App Store and Google Play, you can receive audio/video calls from your entry panel and open your gate from anywhere. Applications This gearmotor kit is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation.

TOUSEK AUTOMATION Swing 265 AEB 29N Hydraulic Operator Kit S12707 | 230V | Up to 600kg, 2.5m Gates

Product Overview The Swing 265 AEB 29N Hydraulic Operator Kit S12707 is designed for swing gates up to 2.5 meters in width and 600 kilograms in weight. This powerful operator offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 265 AEB 29N Hydraulic Operator provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the operator is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The operator is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The operator supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 600 kg and a width of up to 2.5 m, this operator delivers reliable performance. The operator operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 600 kg and 2.5 m in width. What's in the Box 2 x Swing 265 AEB 29N Hydraulic Operators inclusive of installation material 1 x Control ST 50 1 x Radio receiver RS 868 2 channel 1 x Hand transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Light barrier of LS 41 Specifications Max Gate Wing Weight: 600 kg Max Gate Wing Width: 2.5 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 40%

TOUSEK AUTOMATION Swing 225 AEB/29N Hydraulic Operator Kit S12706 | 230V | Up to 400kg, 1.8m Gates

Product Overview The Swing 225 AEB/29N Hydraulic Operator Kit S12706 is designed for swing gates up to 1.8 meters in width and 400 kilograms in weight. This powerful operator offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 225 AEB/29N Hydraulic Operator provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the operator is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The operator is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The operator supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 400 kg and a width of up to 1.8 m, this operator delivers reliable performance. The operator operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 400 kg and 1.8 m in width. What's in the Box 2 x Swing 225 AEB/29N Hydraulic Operators inclusive of installation material 1 x Control ST 50 1 x Radio receiver RS 868 2 channel 1 x Hand transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Light barrier of LS 40 Specifications Max Gate Wing Weight: 400 kg Max Gate Wing Width: 1.8 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 30%

FAAC 230v hydraulic operator kit for swing gates 402 UK KIT

2 Year guarantee

FAAC Hydraulic operator kit for swing gates 422 UK KIT

2 Year guarantee

FAAC 400 UK KIT S | Hydraulic Single Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 UK KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 UK KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 UK KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 UK KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 UK KIT | Hydraulic Operator Double Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 UK KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 UK KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 UK KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SB KIT S | Hydraulic Single Kit for Swing Gates Up to 4m

Product Overview The FAAC 400 SB KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SB KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SB KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SB KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SB KIT | Hydraulic Operator Double Kit for Swing Gates Up to 4m

Product Overview The FAAC 400 SB KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SB KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 4 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SB KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SB KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SBS KIT S | Hydraulic Single Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 SBS KIT S is a comprehensive hydraulic operator single kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Single operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motor, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SBS KIT S is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes a powerful 230V hydraulic motor that ensures smooth and efficient gate operation. The hydraulic locking system securely holds the gate open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SBS KIT S is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SBS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V hydraulic motor 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 400 SBS KIT | Hydraulic Operator Double Kit for Swing Gates Up to 7m

Product Overview The FAAC 400 SBS KIT is a comprehensive hydraulic operator double kit designed for large residential and industrial swing-leaf gates with leaves up to 7 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a hydraulic locking system that holds the gates open and closed at the end of the operating cycle. The exclusive hydraulic device ensures maximum anti-crushing protection, providing safety and reliability under any atmospheric conditions. Key Features Double operator kit for swing gates Suitable for gates up to 7 meters per leaf Hydraulic locking system for secure operation Anti-crushing protection for enhanced safety Compact hydraulic en bloc housing for motor unit Oil-bath lubricated components for minimal maintenance Quiet movement with precision mechanics Reliable operation in extreme temperatures (-40°C to +55°C) Includes motors, control board, photocells, receiver, and transmitters 2-year guarantee on all components Product Description The FAAC 400 SBS KIT is designed to provide robust and reliable automation for large residential and industrial swing gates up to 7 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The hydraulic locking system securely holds the gates open and closed at the end of each operating cycle, providing enhanced security. The exclusive hydraulic device ensures maximum anti-crushing protection, making this kit safe and reliable for all users. The motor unit is housed in a compact hydraulic en bloc housing, with all components oil-bath lubricated and continuously cooled. This design requires very little maintenance and is low on power consumption. The precision mechanics and use of hydraulic oil as the motor fluid result in extremely quiet movement, enhancing the user experience. The FAAC 400 SBS KIT is built to operate reliably under any atmospheric conditions, with a temperature range of -40°C to +55°C. This kit is designed for quick and easy installation, making it suitable for both residential and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SBS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V hydraulic motors 1 x Control board 1 x Control board housing 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

Electro Mechanical Operator with Articulated Arm for Swing Gates | FAAC 390 UK KIT | Up to 3m

Product Overview FAAC 390 UK KIT - Complete kit for a pair of residential swing gates up to a maximum of 3 meters each leaf. This kit is designed for quick and easy installation, providing a reliable and efficient solution for automating swing gates. Key Features Integrated open & close limits for precise control Specially designed for gates with large square pillars Control panel with LCD for simplified programming Quick & easy installation for existing hinged swing gates Manual release from outside in the event of a power failure or fault Product Description Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the limits of the gate travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to consult with us before ordering if this feature is critical to your installation. Designed for Large Pillars Specially designed for gates with large square pillars, the articulated arm can easily reach around the corner of the pillar of the gate without the need to modify any of the bracketry that is normally supplied with other equipment. LCD Display The control panel features an LCD for simplified programming, making the setup process straightforward and user-friendly. Quick & Easy Installation The FAAC 390 UK KIT is designed for the quick and easy installation of existing hinged swing gates, minimizing the time and effort required for setup. Manual Release from Outside In the event of a power failure or fault, the manual release from outside the property allows for convenient access. This feature is particularly useful when the gate is the only means of access to the property. Technical Specifications FeatureSpecification Max Gate Leaf Length 3 meters Control Panel LCD Display Manual Release Yes, from outside

FAAC 413 UK KIT S | Electro Mechanical Operator Kit for Swing Gates

Product Overview The FAAC 413 UK KIT S is a comprehensive electro mechanical operator kit designed for single residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes a 230V motor, control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 UK KIT S is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 230V electro mechanical operator for swing gates up to 2.5 meters Adjustable open and close limits Control board with LCD for simplified programming Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 UK KIT S is designed to provide robust and efficient automation for single swing gates. This 230V electro mechanical operator kit includes a motor capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gate, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 UK KIT S is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x FAAC 413 Motor 1x Control Board with LCD 1x Pair of Photocells 1x Plug-in Receiver/Decoder 2x Two-Channel Remote Transmitters Technical Specifications Product Code: FAAC 413 UK KIT S Power Supply: 230V Gate Type: Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motor, Control Board, Photocells, Receiver/Decoder, Remote Transmitters Control Board: LCD Display Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 UK KIT | Electro Mechanical Double Operator Kit for Swing Gates

Product Overview The FAAC 413 UK KIT is a comprehensive electro mechanical double operator kit designed for automating a pair of residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes two 230V motors, a control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 UK KIT is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 230V electro mechanical operator for swing gates up to 2.5 meters each Adjustable open and close limits Control board with LCD for simplified programming Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 UK KIT is designed to provide robust and efficient automation for double swing gates. This 230V electro mechanical operator kit includes two motors capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gates, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 UK KIT is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 2x FAAC 413 Motors 1x Control Board with LCD 1x Pair of Photocells 1x Plug-in Receiver/Decoder 2x Two-Channel Remote Transmitters Technical Specifications Product Code: FAAC 413 UK KIT Power Supply: 230V Gate Type: Double Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motors, Control Board, Photocells, Receiver/Decoder, Remote Transmitters Control Board: LCD Display Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC Electro mechanical operator double limit switch kit for swing gates 413 LS KIT

2 Year guarantee

FAAC 415 UK KIT S | Electro Mechanical Operator Single Kit for Swing Gates

Product Overview The FAAC 415 UK KIT S is a complete electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit features a 230V motor and an LCD control panel for simplified programming and operation. It is engineered for quick and easy installation on existing hinged swing gates, making it an ideal solution for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motor LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 UK KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor that ensures smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. It includes a plug-in receiver/decoder, making it compatible with various remote transmitters. The pair of photocells provided in the kit ensures safety by detecting obstacles and preventing the gate from closing when something is in the way. With its comprehensive components, the FAAC 415 UK KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V electro-mechanical motor 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 UK KIT | Twin Gate Kit 230V for Swing Gates Up to 3m, 300kg Per Gate

Product Overview The FAAC 415 UK KIT is a comprehensive electro-mechanical twin gate kit designed for residential and light commercial swing gates with leaves up to 3 meters each and a maximum weight of 300kg per gate. This kit includes all necessary components for effective and efficient gate automation, featuring a 230V motor and an LCD control panel for simplified programming and operation. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Twin operator kit for swing gates Suitable for gates up to 3 meters and 300kg per leaf 230V electro-mechanical motors LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 UK KIT is designed to provide robust and reliable automation for twin swing gates up to 3 meters in length and 300kg in weight per leaf. This kit includes powerful 230V electro-mechanical motors that ensure smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. It includes a plug-in receiver/decoder, making it compatible with various remote transmitters. The pair of photocells provided in the kit ensures safety by detecting obstacles and preventing the gate from closing when something is in the way. With its comprehensive components, the FAAC 415 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V electro-mechanical motors 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 LS KIT S | Electro Mechanical Operator Single Limit Switch Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 LS KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit includes everything needed for effective and efficient gate automation, featuring a limit switch for precise control and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motor with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LS KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 LS 230V Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LS KIT | Electro Mechanical Operator Double Limit Switch Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 LS KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 3 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, battery backup for mains power failure, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions and has built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 3 meters per leaf 230V electro-mechanical motors with limit switch Battery backup available for power failures Slow down on open and close for precise operation LCD control panel for easy programming Built-in obstacle detection for safety Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LS KIT is designed to provide robust and reliable automation for double swing gates up to 3 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. This kit features a battery backup option, ensuring that the gates remain operational even during mains power failures, thus enhancing security and convenience. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. Designed for quick and easy installation, the FAAC 415 LS KIT is suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 230V electro-mechanical motors 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 L KIT S | Electro Mechanical Operator Single Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring an LCD control panel for simplified programming. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motor LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 L KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor that ensures smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 230V electro-mechanical motor 1 x Control board with LCD display 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel transmitters Installation manual and hardware

FAAC 415 L KIT | Electro Mechanical Operator Double Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring an LCD control panel for simplified programming. It is engineered for quick and easy installation on existing hinged swing gates, providing an ideal solution for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motors LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 L KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors that ensure smooth and efficient gate operation. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC 415 L 230V Operators 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LLS KIT S | Electro Mechanical Operator Single Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 LLS KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motor with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motor, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LLS KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 230V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LLS KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 LLS 230V Operator 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 415 LLS KIT | Electro Mechanical Operator Double Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 LLS KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, and an LCD control panel for simplified programming. It allows for speed adjustment as the gate approaches the open and closed positions, providing a refined touch to the overall installation. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 230V electro-mechanical motors with limit switch Slow down on open and close for precise operation LCD control panel for easy programming Quick and easy installation Includes motors, control board, photocells, plug-in receiver, and transmitters Product Description The FAAC 415 LLS KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 230V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The plug-in receiver/decoder and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LLS KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC 415 LLS 230V Operators 1 x FAAC 455D Control Board 1 x Pair of Photocells 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters Installation manual and hardware

CAME Electromechanical Swing Gate Pair Kit FERNIE-P | 230V | Up to 4m

Product OverviewThe CAME FERNI Articulated Arm Swing Gate Automation Kit is designed for gates up to 4m or up to 400kg per leaf. This 230V kit is ideal for both single homes and apartment blocks, offering reliable and robust gate automation. The FERNI range is fully Connect compatible, allowing for full remote control and system management. It also supports the CAME Key for simple setup and backup via smartphone.Key FeaturesSuitable for swing gates up to 4m or up to 400kg per leaf230V electromechanical motor with encoderFully Connect compatible for remote control and system managementCAME Key support for easy setup and backup via smartphoneIdeal for large gate posts in single homes and apartment blocksKit Contents2x Ferni 230V Gearmotors (with Encoder)1x Multi-Function Control Panel1x Plug-in Radio Frequency Code2x Dual Frequency 4-Button Fixed Code Transmitters1x Tuned Antenna1x Pair Safety Photocells2x FE40230 motors (with encoder)1x AF43S radio card1x pair DIR-10 photocells1x ZM3E control panel2x TOP-432NA remote transmitters1x TOP-A433N antennaSpecificationsMax gate leaf width4mMax gate leaf weight400kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FERNIE-S | 230V | Up to 4m

Product OverviewThe CAME FERNIE-S KIT is a complete automation solution for single residential or apartment block swing gates up to 4m in width or 800kg in weight per leaf. This 230V kit features advanced functionalities like adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides total control of automated systems at all times.Key FeaturesSuitable for single swing gates up to 4m in width or 800kg in weight per leafSlow down on open and close positions for smooth operationLCD display on control panel for simplified programmingDesigned for large square pillars with articulated arm for easy installationBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote monitoring and control via smartphone appKit Contents1x CAME FE40230 230V Motor1x CAME AF43S Frequency Card1x Pair CAME DIR-10 Safety Photocells1x CAME ZM3EZ Control Panel2x CAME TOP4DRKS Radio Remotes (806TS-0122)1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FAST40-S | 230V | Up to 2.3m

Product Overview The CAME FAST40-S KIT is an ideal solution for automating single residential or apartment block swing gates up to 2.3m in width or 300kg in weight per leaf. This 230V semi-intensive kit features a mechanically locking motor and provides a maximum opening angle of 110 degrees. The motor operates at a speed of 18 seconds for a 90-degree opening. Key Features Suitable for single swing gates up to 2.3m in width or 300kg in weight per leaf 230V semi-intensive use motor Mechanically locking motor for secure operation Max opening angle of 110 degrees Speed: 18 seconds for 90-degree opening Above ground motor for easy installation Kit Contents 1x FA40230CB motor with control board 1x AF43S radio card 1x pair DIR10 photocells 2x TOP-432NA remote transmitters 1x TOP-A433N antenna Specifications Max gate leaf width 2.3m Max gate leaf weight 300kg Motor voltage 230V Power supply 230V Frequency of use Semi-intensive Operating temperature -20°C to +55°C Protection level IP44 Max opening angle 110 degrees Opening speed 18 seconds for 90 degrees CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit AMICO-P230 | 230V | Up to 2.2m

Product Overview The CAME AMICO-P230 KIT is a complete automation solution for a pair of residential swing gates up to 2.2m in width or 250kg in weight per leaf. This 230V kit features adjustable open and close limits, allowing you to set the limits of the gate's travel without the need for a physical stop in the ground. Designed for quick and easy installation, this equipment is perfect for existing hinged swing gates. Key Features Suitable for a pair of swing gates up to 2.2m in width or 250kg in weight per leaf Adjustable open and close limits without the need for a physical stop Quick and easy installation for existing hinged swing gates Integrated control panel for simplified operation Kit Contents 2x CAME A18230 230V Motors 1x CAME AF43S Frequency Card 433MHz 1x Pair CAME DIR-10 Safety Photocells 1x CAME ZA3P Control Panel 2x CAME TOPD4FKS Radio Remotes - 806TS-0102 1x CAME TOP-A433N Antenna Specifications Max gate leaf width 2.2m Max gate leaf weight 250kg Motor voltage 230V Power supply 230V Frequency of use Intensive Operating temperature -20°C to +55°C Protection level IP44

CAME Electromechanical Swing Gate Single Kit AMICO-S230 | 230V | Up to 2.2m

Product OverviewThe CAME AMICO-S230 KIT is a complete automation solution for a single residential swing gate up to 2.2m in width or 250kg in weight per leaf. This 230V kit features adjustable open and close limits, allowing you to set the limits of the gate's travel without the need for a physical stop in the ground. Designed for quick and easy installation, this equipment is perfect for existing hinged swing gates.Key FeaturesSuitable for a single swing gate up to 2.2m in width or 250kg in weight per leafAdjustable open and close limits without the need for a physical stopQuick and easy installation for existing hinged swing gatesIntegrated control panel for simplified operationKit Contents1x CAME A18230 230V Motor1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZA3N Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width2.2mMax gate leaf weight250kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit AXO P3 | 230V | Up to 3m

Product Overview This kit is for use with a pair of swing gates up to 500kg @ 3m or up to 800kg @ 2m per leaf. The AXO Range is fully Connect compatible which enables full remote control and system management. It is compatible with the CAME Key, allowing for simple setup and backup by smartphone. AXO features a revolutionary double-headed worm screw that drastically reduces wear on the axle boxes. It is designed for long life and the utmost safety even with very large gates. The Gearmotor has high-quality bearing semi-shells in die-cast aluminum. Installation is easy due to a single three-wired cable connection system. Key Features Suitable for a pair of swing gates up to 3m in width or 500kg in weight per leaf Backup batteries ensure operation during power outages Designed to work in all climate conditions Revolutionary double-headed worm-screw reduces wear on the axle box Obstacle detection for enhanced safety Connect compatible for full remote control and system management Easy installation with a single three-wired cable connection system Kit Contents 2x AX3024 230V Irreversible Gearmotors (with Encoder) 1x Multi-Function Control Panel 1x AF43S Plug-in Radio Frequency Code (433.92MHz) 2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz) 1x TOP-A433N Tuned Antenna 1x DIR-10 Pair Safety Photocells Technical Specifications Max gate leaf width 3m Max gate leaf weight 500kg @ 3m, 800kg @ 2m Motor voltage 230V Power supply 230V Operating temperature -20°C to +55°C Protection level IP44 Features Blackout is no longer a problem due to backup batteries. Designed to always work no matter the climate conditions Revolutionary double-headed worm-screw drastically reduces wear on the axle box Obstacle detection AXO is fully Connect compatible, allowing full remote control and system management AXO is compatible with the CAME Key, allowing for simple setup and backup by smartphone. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit AXO S3 | 230V | Up to 3m

Product OverviewThe CAME AXO-S3 KIT is a complete automation solution for a single residential or apartment block swing gate up to 3m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides total control of automated systems at all times.Key FeaturesSuitable for a single swing gate up to 3m in width or 800kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents1x CAME AX302304 230V Motor1x CAME AF43S Radio Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZM3E Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width3mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Above Ground Automation AXO-P4 Kit for Swing Gates Up to 4m

Product OverviewThe CAME AXO-P4 KIT is a complete automation solution for a pair of residential or apartment block swing gates up to 4m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for swing gates up to 4m in width or 800kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents2x CAME AX402306 230V Irreversible Gearmotors (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electro Mechanical Automation for Swing Gates Single Kit AXO S4 for Up to 4m

Product OverviewThe CAME AXO-S4 KIT is a complete automation solution for a single residential or apartment block swing gate up to 4m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for a single swing gate up to 4m in width or 800kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents1x CAME AX402306 230V Irreversible Gearmotor (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-P7 KIT | Above Ground Gate Automation | For Swing Gates Up to 7m

Product OverviewThe CAME AXO-P7 KIT is a complete automation solution for a pair of residential or apartment block swing gates up to 7m in width or 1000kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for swing gates up to 7m in width or 1000kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-P7 KIT is designed to offer a comprehensive automation solution for swing gates in residential or apartment block settings. Each leaf of the gate can be up to 7m wide and weigh up to 1000kg, making this kit suitable for a wide range of applications. The 230V motors included in the kit ensure powerful and reliable performance.The kit's adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. Safety is a priority with the built-in obstacle detection system, which helps prevent accidents and damage. The LCD display on the control panel simplifies programming and adjustments, making the setup process straightforward and user-friendly.The CAME Cloud Technology supports remote management and control, ensuring users can always stay connected to their system.Kit Contents2x CAME AX702306 230V Irreversible Gearmotors (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width: 7mMax gate leaf weight: 1000kgMotor voltage: 230VPower supply: 230VFrequency of use: IntensiveOperating temperature: -20°C to +55°CProtection level: IP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-S7 KIT | Swing Gate Automation | For Single Gates Up to 7m

Product OverviewThe CAME AXO-S7 KIT is a comprehensive automation solution for a single residential or apartment block swing gate up to 7m in width or 1000kg in weight. This 230V kit offers features such as adjustable speed for smooth opening and closing, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for single swing gates up to 7m in width or 1000kg in weightAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-S7 KIT is tailored for automating single swing gates in residential or apartment block settings. Capable of handling gates up to 7m wide and weighing up to 1000kg, this kit ensures powerful and dependable performance with its 230V motor.The adjustable speed feature allows for a smooth approach to both the open and closed positions, enhancing the overall functionality and providing a refined touch to each installation. The integrated open and close limits eliminate the need for physical stops, though for gates over 1.8m wide, consultation is advised to ensure this feature meets specific installation needs.Safety is paramount with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges.The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.Kit Contents1x AX71230 motor1x AF43S radio card1x pair DIR-10 photocells1x ZM3E control board2x TOP-432NA remote transmitters1x TOP-A433N antennaCAME Connect RGSM unit available with this kit for an additional cost – please call for details