FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO - F/9690L and F/9689L PERIMETER SECURITY Intended for traffic control and protection of those sensitive areas (embassies, military bases, government palaces, banks, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to safely withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 80 km/h and stay intact and fully operative. EFO (Emergency Fast Operation) version also available for quick rising in an emergency. OIL-HYDRAULIC Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Drive unit with two lobe pumps. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered. STRONG Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 2.000.000 J. Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights. VERSATILE A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C, where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.  CERTIFICATES Classes of performance: K12 / M50 / C750 Certified: ASTM F2656-15 C750 PAS 68:2013 V/7500 (N3)/80 IWA 14-1:2013 V/7200 [N3C]/80 DIMENSIONS (mm) ø 275 h 1.000 δ 20 ADDITIONAL INFORMATION Each item includes an automatic bollard complete with pit, moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with head and rubber edge and No. 12 amber-colour integrated LED lights, approved retro-reflecting high intensity micro-prismatic adhesive film, electrolytic galvanized steel housing assembly with an oilhydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), burglar-proof cover plate and release spanner with triangular socket. The power supply cable is not included, it is though available in the section of the catalogue dedicated to the bollard accessories. SPECIFICATIONS TALOS BOLLARD TYPE TALOS M50 series Cylinder diameter (mm) 275 Cylinder thickness (mm) 20 Cylinder height from ground (mm) 1000 Cylinder material S355K2H steel Cylinder treatment and finishing cataphoresis and polyester powder coating RAL 7016 / AISI 304 brushed SS steel sleeve Pit hot dip galvanization Rising time (s) [cm/s] ~5,00 [20] / with EFO ~1,5 [50] Lowering time (s) [cm/s] ~3.20 [20] Working temperature (°C) -20 ÷ +80 (-40 with heater) Oil type 708L Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 3.100 (1.550 + 1.550) Absorbed current (A) 10 ÷ 13 Grade of protection IP/motor-pump 67 Frequency of use (cycles/day) heavy duty / 2.000 Impact resistance (J) 700.000 Breakout resistance (J) 2.000.000 Maximum static load (kg) 20.000

BENINCA MAXIMUM M30 900mm Bollard | Hydraulic, Anti-Terrorism, Certified

Product Overview The MAXIMUM M30 900mm Bollard is an automatic, hydraulic, anti-terrorism certified bollard designed to withstand impacts from vehicles weighing up to 7500 kg at speeds of 48 km/h. This robust bollard provides dynamic vehicle penetration protection of -0.8 meters. It features a built-in LED lighting system and can be controlled via a unit that manages two bollards simultaneously. Key Features Certified to withstand impacts from 7500 kg vehicles at 48 km/h Dynamic vehicle penetration: -0.8 m Emergency Fast Operation (E.F.O.) available for fast raising in 1.5 seconds Cylinder with built-in LED lights Foundation box complying with EN124 (40T) regulation Independent hydraulic pump for each bollard Manual release in the event of power failure Heating for the foundation box and buzzer available as accessories Suitable for use at sensitive sites such as embassies, police stations, and military bases Product Description The MAXIMUM M30 900mm Bollard is engineered for maximum security and durability. It features a robust hydraulic system with an independent pump for each bollard, ensuring continuous operation even in the event of an impact. The bollard can withstand high-impact forces, with an impact resistance of 250,000 J and a breakout resistance of 850,000 J. The bollard includes a dynamic vehicle penetration feature of -0.8 meters, providing additional security against vehicle attacks. The Emergency Fast Operation (E.F.O.) option allows the bollard to raise in just 1.5 seconds, ensuring rapid response during emergencies. Designed for high-traffic and sensitive locations, the MAXIMUM M30 bollard is ideal for company or factory access driveways, embassies, police stations, military bases, ministerial buildings, and other sensitive sites. The built-in LED lights enhance visibility and safety, while the foundation box complies with EN124 (40T) regulations, ensuring durability and reliability. In the event of a power failure, the bollard will remain in the raised position, with manual release available under the box cover. Optional heating for the foundation box and a buzzer are available for enhanced functionality in extreme conditions. Specifications Cylinder Height 900 mm Cylinder Diameter 275 mm Raising Time 4.5 s Lowering Time 4.5 s Power Supply 230 Vac - 50/60 Hz (control panel with different voltages available on request) Power Consumption 1,000 W Hydraulic Pump Built-in Load Index (EN124) D400 (40 tonnes) Manual Lowering Cycle in Case of Power Failure Manual release under the box cover Emergency Fast Operation (E.F.O.) Optional Emergency Rising Time 1.5 s Capacitor 31.5 μF Daily Cycles 3,500 MCBF 3,000,000 Certifications IWA 14-1:2013 V/7200 [N3C] /48/90: -0.8 | PAS68:2013 V/7500 [N3] /48/90: -0.5 | ASTM F2656 Rating C730/7200 - P1 Impact Resistance 250,000 J Breakout Resistance 850,000 J Operating Temperature -40°C ÷ +60°C [GL.HEAT available as option for temperatures lower than -10°] Protection Level IP67 Weight (without foundation box) 340 kg (350 kg MAX M30-I) Applications The MAXIMUM M30 900mm Bollard is ideal for high-security locations such as company or factory access driveways, embassies, police stations, military bases, ministerial buildings, and other sensitive sites. Its robust construction and advanced features make it an excellent choice for enhancing the security and protection of critical infrastructure.