FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO

FADINI TALOS M50 Automatic Bollard for Perimeter Security with optional EFO - F/9690L and F/9689L PERIMETER SECURITY Intended for traffic control and protection of those sensitive areas (embassies, military bases, government palaces, banks, etc.), where a high level of perimeter security is needed against terrorist attacks. Designed and tested to safely withstand, in a single bollard configuration, a vehicle of 7,5 t at a speed of 80 km/h and stay intact and fully operative. EFO (Emergency Fast Operation) version also available for quick rising in an emergency. OIL-HYDRAULIC Hydraulic locking device in standing position (standard) and emergency manual lowering by a release spanner supplied with the equipment. Drive unit with two lobe pumps. Burglar-proof cover plate preventing the release system from being accessed and thus the bollard from being lowered. STRONG Scratch-proof cataphoresis treated and polyester powder coated steel rising cylinder. Available also with an AISI 304 stainless steel cover sleeve, thickness 12/10. Breakout resistance: 2.000.000 J. Connector and junction box IP 66 for cabling. Hall effect limit switch sensors, cylinder head with rubber edge and incorporated LED lights. VERSATILE A vast range of command and safety accessories allow for reliable and precise control of the installations. Beeper to signal the movements. Heating device for installations in very low temperature conditions -40 °C, where snow and ice are frequent. The electronic control unit can be set so that it can manage several bollards at a time.  CERTIFICATES Classes of performance: K12 / M50 / C750 Certified: ASTM F2656-15 C750 PAS 68:2013 V/7500 (N3)/80 IWA 14-1:2013 V/7200 [N3C]/80 DIMENSIONS (mm) ø 275 h 1.000 δ 20 ADDITIONAL INFORMATION Each item includes an automatic bollard complete with pit, moving cylinder made of cataphoresis treated steel, polyester powder coated in RAL 7016 anthracite grey, complete with head and rubber edge and No. 12 amber-colour integrated LED lights, approved retro-reflecting high intensity micro-prismatic adhesive film, electrolytic galvanized steel housing assembly with an oilhydraulic actuator and drive unit, two limit switch sensors (bollard in standing and lowered positions), burglar-proof cover plate and release spanner with triangular socket. The power supply cable is not included, it is though available in the section of the catalogue dedicated to the bollard accessories. SPECIFICATIONS TALOS BOLLARD TYPE TALOS M50 series Cylinder diameter (mm) 275 Cylinder thickness (mm) 20 Cylinder height from ground (mm) 1000 Cylinder material S355K2H steel Cylinder treatment and finishing cataphoresis and polyester powder coating RAL 7016 / AISI 304 brushed SS steel sleeve Pit hot dip galvanization Rising time (s) [cm/s] ~5,00 [20] / with EFO ~1,5 [50] Lowering time (s) [cm/s] ~3.20 [20] Working temperature (°C) -20 ÷ +80 (-40 with heater) Oil type 708L Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 3.100 (1.550 + 1.550) Absorbed current (A) 10 ÷ 13 Grade of protection IP/motor-pump 67 Frequency of use (cycles/day) heavy duty / 2.000 Impact resistance (J) 700.000 Breakout resistance (J) 2.000.000 Maximum static load (kg) 20.000