FADINI F/624L JUNIOR 624 24Vdc Electromechanical Geared Motor Operator for Sliding Gates up to 400 kg

Product Overview The FADINI JUNIOR 624 24Vdc electromechanical geared motor operator is designed for sliding gates up to 400 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 24Vdc geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Pre-set for battery backup in case of power failure Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 624 offers a powerful and quiet solution for automating sliding gates. The 24Vdc geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 624, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates and pre-set for battery backup to ensure continuous operation during power failures. The JUNIOR 624 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Motor voltage (V) 24 Max. absorbed power (W) 220 Max. absorbed current (A) 6.3 Max. torque (N) 400 Motor revolutions (rpm) 3,000 Speed (m/min) 12 Gear ratio 1:61 Working temperature (°C) -25 ÷ +50 Grade of protection IP 54 Oil type F/706L Weight (kg) 11 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

FAAC S800H ENC SBW 24v 180 Degree - Hydraulic Underground Swing Gate Operator

Product Overview The FAAC S800H ENC SBW 24v 180 Degree is a robust hydraulic underground operator designed specifically for single-leaf swing gates in residential and condominium applications. It supports gate widths of up to 4m and weights of up to 800kg, offering reliable operation and enhanced security. Key Features Hydraulic underground operator for swing gates Integrated magnetic encoder with bus "2easy" for precise gate positioning Integrated positive stops eliminate the need for mechanical stops on the ground FAAC patented hybrid technology combines hydraulic power with electronic control Service release device for manual operation during power outages Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Power supply voltage: 230V, Motor voltage: 24V Protection rating: IP67 Operates swing gates with a maximum opening angle of 180 degrees Max gate speed: 11 seconds for 90 degrees Continuous use frequency Technical Specifications Power Input: 60W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Motor: Hydraulic Locking Method: Requires Solenoid Lock Gate Speed: 11 Seconds 90 Degrees Duty Cycle: Very-Intensive Protection Rating: IP67 Motor Range: S800H Category: Swing Gate Motor Applications The FAAC S800H ENC SBW 24v 180 Degree is ideal for automating single-leaf swing gates in residential and condominium settings. Its advanced features ensure smooth operation, durability, and security, making it a reliable choice for homeowners and residents.

BFT Giuno Ultra BT A50 | Long Stroke Hydraulic Motor for Gates Up to 5m (24V)

Product Overview The Giuno Ultra BT A50 Long Stroke Hydraulic Motor is a 24V hydraulic swing gate operator designed for residential use. This operator is capable of handling swing gates up to 5 meters in length and weighing up to 400kg. The Giuno Ultra BT A50 combines cutting-edge engineering with power and function to create the ideal solution for residential swing gates. Advanced-Track technology analyzes real-time torque data to provide the optimal amount of force, ensuring a smooth closing and opening action without causing excessive wear. Key Features Handles Gates Up to 5m & 400kg: Suitable for various residential settings. Advanced-Track Technology: Analyzes real-time torque data for optimal force application. High Torque: 3,000 newton operating force and 30 bar maximum pressure. Hydraulic Operation: Provides smooth and reliable gate movement. Built-in Obstacle Detection: Through the exclusive D-Track torque management system. Hard Wearing & Flexible: Suitable for intensive everyday usage. Fast Cycle Time: 20-second cycle time with an opening angle of 110°. Product Description The Giuno Ultra BT A50 Long Stroke Hydraulic Motor is engineered to automate swing gates up to 5 meters in length and 400kg in weight per leaf. Ideal for residential properties, this 24V hydraulic gate operator offers robust performance with high torque and smooth operation. The Advanced-Track technology ensures that the Giuno Ultra BT A50 provides the optimal amount of force for a smooth closing and opening action, reducing wear and tear on the gate. This versatile gate opener is suitable for a wide range of residential settings and is capable of handling intensive everyday usage. The built-in obstacle detection through the exclusive D-Track torque management system enhances the safety and reliability of the automation. The motor's fast cycle time and wide opening angle make it an efficient and practical choice for residential gates. The Giuno Ultra BT A50 features a high torque of 3,000 newton operating force and can handle up to 30 bar maximum pressure, ensuring powerful and consistent operation. The hydraulic mechanism provides smooth and reliable movement, while the compact design allows for versatile installation in various settings. Specifications SpecificationGIUNO ULTRA BT A50 Power Supply 24V Gate Leaf Length 2m / 5m* Max Leaf Weight 800kg / 400kg Control Panel THALIA P Cycle Time 20 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° *Max leaf weight varies depending on the length of the gate leaf. Available Kits KITGIUNOULTRABTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOULTRABTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

NICE M-FAB MFAB3024: Irreversible 24 Vdc Swing Gate Motor with Magnetic Encoder

Product Overview The M-FAB MFAB3024 is a robust and reliable swing gate motor designed for underground installation. Suitable for gates with leaves up to 3.5 meters, this motor ensures smooth and efficient operation with its advanced features. Key Features Max Gate Length: Suitable for swing gates with leaves up to 3000mm Installation Type: Underground installation for a discreet and clean setup Motor Voltage: 24 Vdc for efficient and reliable performance Max Gate Weight: Can handle gates weighing up to 600kg Max Opening Angle: 110 degrees for optimal gate movement Locking Method: Mechanically locking motor for added security Motor Type: Electromechanical for precise control Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens 90 degrees in just 11 seconds Duty Cycle: Intensive use for frequent operation Magnetic Encoder: Ensures accurate movement and positioning Specifications SpecificationDetails Max Gate Length 3000mm Installation Type Underground Motor Voltage 24 Vdc Max Gate Weight 600kg Max Opening Angle 110 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 11 seconds for 90 degrees Duty Cycle Intensive Benefits The M-FAB MFAB3024 swing gate motor offers a combination of reliability and performance, making it an ideal choice for both residential and commercial installations. Its underground design ensures minimal visual impact while providing robust security and smooth operation. Installation and Setup Installing the M-FAB MFAB3024 is straightforward, with comprehensive instructions provided in the manual. Ensure to follow all safety guidelines for optimal performance and compatibility with your swing gate system.

NICE Irreversible SFAB2124 | 24V DC Swing Gate Motor | Magnetic Encoder

Product Overview The SFAB2124 is a robust and reliable 24 Vdc swing gate motor, perfect for gates with leaves up to 2.3 meters. Designed for underground installation, this ultra-compact motor offers intensive use and features a magnetic encoder for precise control. Key Features Max Gate Length: Suitable for gates up to 2300mm Installation Type: Underground installation for a clean and discreet setup Motor Voltage: 24V DC for efficient operation Max Gate Weight: Supports gates weighing up to 400kg Max Opening Angle: Achieves a full 180-degree opening angle Locking Method: Mechanically locking motor ensures secure closure Motor Type: Electromechanical for reliable performance Protection Rating: IP 67 for superior protection against dust and water Gate Speed: Opens to 90 degrees in just 15 seconds Duty Cycle: Designed for intensive use, ideal for high-traffic areas Mains Power Supply: 230V Product Description Irreversible SFAB2124 | 24V DC Swing Gate Motor | Magnetic Encoder The SFAB2124 motor is designed to provide robust and reliable performance for swing gates, particularly those with large columns. The 24V DC motor ensures smooth and efficient operation, while the magnetic encoder offers precise control. The underground installation provides a clean and unobtrusive appearance, making it a versatile solution for various gate automation needs. Technical Specifications SpecificationDetails Max Gate Length 2300mm Installation Type Underground Motor Voltage 24V DC Max Gate Weight 400kg Max Opening Angle 180 degrees Locking Method Mechanically locking motor Motor Type Electromechanical Protection Rating IP 67 Gate Speed 15 seconds to 90 degrees Duty Cycle Intensive Mains Power Supply 230V Benefits of the SFAB2124 Swing Gate Motor The SFAB2124 swing gate motor offers a combination of strength, reliability, and advanced technology, making it ideal for both residential and commercial applications. Its underground installation ensures an unobtrusive appearance, while the intensive duty cycle makes it perfect for frequently used gates. Installation and Setup Installing the SFAB2124 is straightforward, with clear instructions provided in the manual. The magnetic encoder allows for precise control, and the motor's compact size makes it suitable for various installation environments. Ensure to follow all safety guidelines for optimal performance.

DEA GEKO/X - Electromechanical operator for swing gates up to 3 m - 250 kg

Product Overview The DEA GEKO/X Electromechanical Operator is a next-generation swing gate automation system designed for residential and collective use. Capable of handling gates up to 3 meters in length and weighing up to 250 kg, the GEKO/X features significant improvements over its predecessor, including 30% faster operation, extended opening angles up to 120°, and enhanced weather protection with an ABS crankcase. Available in single (GEKO/X) and dual operator (GEKO/X/2) configurations, this 24V system combines powerful performance with smart connectivity through integrated NETLINK technology. Product Description The GEKO/X represents a major evolution in swing gate automation, featuring an upgraded gearbox that delivers opening times as fast as 8.5 seconds with the sliding arm or 12 seconds with the articulated arm. The operator uses advanced encoder technology for precise movement control and reliable obstacle detection. Its ABS crankcase provides superior weather resistance rated at IP44, while the protected release system and control board ensure long-term reliability. The system accommodates various arm types including articulated arms (GEKO/X/BA, GEKO/X/BLA) for standard installations and sliding arms (GEKO/X/BS) for space-constrained applications. Optional features include integrated battery backup, LED lighting strips, and external unlocking via the BLINDOS system with GEKO/SF cable release. Key Features 30% Faster Operation: Upgraded gearbox delivers 8.5-12 second opening times at 90°, significantly faster than previous models. Extended Opening Range: Opens gates up to 120° compared to standard 90°, providing greater flexibility. Enhanced Weather Protection: ABS crankcase with IP44 rating and protected release system for improved durability. 24V Encoder Technology: Precise movement control with improved obstacle detection accuracy for enhanced safety. Integrated NETLINK Compatible: Built-in NET24N control board enables smart management via DEAuser and DEAinstaller apps. Flexible Arm Options: Compatible with articulated, sliding, and long arms for various installation requirements. Battery Backup Ready: Designed to accommodate rechargeable battery kit for operation during power outages. Optional LED Lighting: Available LED strip kit integration for enhanced visibility and aesthetics. Slope Installation: Compatible with KIT CLIMB for installations on gradients up to 12%. Quality Construction: Steel and bronze internal mechanisms ensure long-lasting reliability. What's in the Box 1 x DEA GEKO/X Electromechanical Operator (GEKO/X) OR 2 x Operators (GEKO/X/2) 1 x NET24N Control Board (integrated) Fixing plates Mechanical stops Unlocking key (5 pcs available separately as KIT KEY GEKO) Note: Arms sold separately - choose from GEKO/X/BA, GEKO/X/BS, GEKO/X/BL, or GEKO/X/BLA Specifications Power Supply: 230-240V ~ (50/60 Hz) Motor Power Supply Voltage: 24V ⎓ Nominal Power: 110W Maximum Power: 419W Nominal Torque: 35Nm Maximum Torque: 260Nm Duty Cycle: 20 cycles/hour Maximum Cycles in 24h: 60 cycles Operating Temperature: -20°C to +50°C 90° Opening Time (Articulated Arm): 12 seconds 90° Opening Time (Sliding Arm): 8.5 seconds Maximum Opening Angle: 120° Nominal Speed: 2.15 rpm Maximum Speed: 2.15 rpm Weight with Packing: 11.6 kg (GEKO/X: 10.9kg, GEKO/X/2: 19.1kg) Sound Pressure: < 70 dBA Protection Level: IP44 Maximum Gate Length: 3m (with GEKO/X/BA), 1.75m (with GEKO/X/BS) Maximum Gate Weight: 250 kg per leaf Encoder: Yes (magnetic/digital) Use Intensity: Residential and Collective

FAAC S800H ENC CBAC 180 | 24V Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800H ENC CBAC 180 is a 24V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 24V hydraulic underground operator motor Suitable for swing gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Product Description The FAAC S800H ENC CBAC 180 is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This 24V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800H ENC CBAC 180 offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800H ENC CBAC 180 24V hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC S800H ENC SBW 24V 100° | Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800H ENC SBW 100° is a 24V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 24V hydraulic underground operator motor Suitable for swing gates up to 4 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Technical Specifications Power Input: 60W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Max Opening Angle: 100 Degrees Motor: Hydraulic Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 24V Gate Speed: 11 Seconds to 90 Degrees Duty Cycle: Very-Intensive Protection Rating: IP 67 Motor Range: S800H Category: Swing Gate Motor Product Description The FAAC S800H ENC SBW 24V 100° is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 4 meters in length. This 24V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800H ENC SBW 24V 100° offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800H ENC SBW 24V 100° hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

DEA ANGOLO 24V Electromechanical Operator | Swing Gate Kit | Up to 2.3m, 200kg

Product Overview The ANGOLO 24V Electromechanical Operator is designed for residential swing gates up to 2.3 meters in length and 200kg in weight. This motor is compact, making it an ideal solution for installations with limited space. It offers reliable performance and is equipped with advanced safety and smart control features. Product Description The ANGOLO 24V electromechanical automation moves swing gate leaves for residential use up to 2.3 meters long and weighing up to 200 kg. Its small size, just over 11 cm wide, meets the needs of those who want to automate a swing gate but have limited space for installation. When combined with the slide arm, the motor further optimizes the available space by keeping the arm inside the track during operation. The motor is made from robust materials like iron and bronze, ensuring long-lasting performance and resistance to wear. In case of a power failure, the gate can be manually unlocked and operated using the provided metal key or the BLINDOS system for external access. Key Features Compact Design: Suitable for gates up to 2.3m and 200kg, ideal for limited spaces. Durable Construction: Made with high-quality materials such as iron and bronze for long-lasting performance. Manual Override: Allows manual operation during power failures using a metal key or the BLINDOS system. Smart Control: Can be controlled via the DEAuser app, with remote monitoring through NET-COM. Safety Features: Equipped with a speed and slowdown regulation system and an anti-crush sensor for safe operation. What's in the Box 1 x ANGOLO 24V Electromechanical Operator (ANGOLO24NET/1) 1 x Control Board (NET24N) Anti-crushing safety device Speed adjustment and slow down in opening and closing Specifications Motor Power Supply: 24V Maximum Power Absorption: 60W Max Torque: 120Nm Duty Cycle: 25 cycles/hour Maximum Cycles in 24h: 60 cycles Operating Temperature: -20°C to 50°C 90° Opening Time: 15 seconds Weight with Packing: 12.5kg Sound Pressure: Less than 70dBA Protection Level: IP44