GIBIDI TOP EVO | Hydraulic Operator for Gates up to 6m (230v) | Heavy Duty Use

Product Overview The TOP EVO hydraulic operator is designed for gates up to 6 meters in length and is suitable for both residential and intensive use. This 230 Vac operator is ideal for heavy, medium, and large size swing gates, offering reliable and efficient performance. Key Features Easy to install - preloaded and factory adjusted, no purge valves or oil top-up required, mounting brackets supplied Silent and fast - hydraulic slowdowns integrated in the last 3cm of rod travel Technological and safe - built with unique vacuum loading process to prevent condensation and emulsion, gasket-free pump-distributor coupling Complete and reliable range - suitable for small residential gates to large commercial or industrial gates, special motors for intensive use Product Description The TOP EVO hydraulic operator is an advanced solution for automating swing gates up to 6 meters in length. Designed for heavy-duty use, it is suitable for both residential and commercial applications. The operator is easy to install, with no need for purge valves or oil top-up, and comes with all necessary mounting brackets. This operator is extremely silent and fast, with hydraulic slowdowns integrated in the last 3cm of rod travel. Its unique vacuum loading process eliminates air residues inside, preventing condensation and emulsion. The pump-distributor coupling is gasket-free, ensuring long-lasting performance. The new die-cast aluminium back-end and torque settings valves enhance reliability and safety. The TOP EVO range includes models suitable for a variety of gate sizes and weights, with special motors designed for intensive use. The operator features adjustable force and speed, electronic speed adjustment (using the BA230 control board), and a high degree of protection (IP65). It is capable of handling gates with a maximum leaf length of 6 meters and operates efficiently in temperatures ranging from -20°C to +60°C. Specifications Technical FeatureTOP291E - ER - ER/STOP391E - ER - ER/STOP441E - ER - ER/S Type of use Heavy Duty Heavy Duty Heavy Duty Frequency of use 55% 55% 55% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz Absorbed power 170W 190W 190W Degree of protection IP65 IP65 IP65 Rod speed 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) Max rod stroke 265 mm (290 mm for E) 265 mm (290 mm for E) 425 mm (440 mm for E) Max thrust force 3000 N (2200 N for ER/S) 4500 N (3000 N for ER/S) 4500 N (3000 N for ER/S) Force adjustment Hydraulic Hydraulic Hydraulic Speed adjustment Electronic ** Electronic ** Electronic ** Hydraulic slowdown Yes (No for E) Yes (No for E) Yes (No for E) Max leaf length 3.5 m * 4.5 m * 6.0 m * Operating temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C Rod diameter 16 mm 20 mm 20 mm Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Operator weight 7.7 Kg 8.7 Kg 10 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary. ** By the use of the BA230 control board Applications The TOP EVO hydraulic operator is ideal for a wide range of applications, from small residential gates to large commercial or industrial gates. Its heavy-duty design and advanced features ensure reliable performance even under intensive use conditions.

FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates up to 2,3m

FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates OIL-HYDRAULIC Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by special key. ROBUST Structure entirely made of aluminium. Simple to install and adjust. It comes in a kit format including the accessories. VERSATILE Several options are available such as reversible non locking, locking by hydraulic device in closed gate position or double locking. TECHNICAL DATA Rod stroke (mm) 235 Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Power yield (W) 180 Max. absorbed current (A) 1.2 Pump flow rate (l/min) 1,4 (P5) Rod diameter (mm) 16 Linear speed opening (mm/s) ~ 16 Linear speed closing (mm/s) ~ 16 Opening force (N) 0 ÷ 5.100 Closing force (N) 0 ÷ 6.200 Working temperature (°C) -25°C / +80°C Oil type 708L Grade of protection IP 67 Frequency of use intensive Weight (kg) 9.5   PRODUCT GUIDE CODE VERSION LH/RH POWER (kW / HP) HYDRAULIC LOCKING SINGLE GATE MAX. WIDTH (m)* SINGLE GATE MAX. WEIGHT (kg)* STOCK F/887L-SX 230 Vac 1PH LH 0,18 / 0,25 not locking 2,3 400 Available F/887L-DX 230 Vac 1PH RH 0,18 / 0,25 not locking 2,3 400 Available F/888L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/888L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/889L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate opened and closed 2,3 400 Available F/889L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate opened and closed 2,3 400 Available  * The gate structure, size and possible strong winds may affect the values as indicated. Always make sure the gate is adequate to be automatically operated and remove any possible friction points NOTE: See product brochure in manual for additional information Please call the office for discounts on these and to specify other details of the purchase. 01564 731035 We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.  

FADINI F/650L JUNIOR 650 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 1200 kg

Product Overview The FADINI JUNIOR 650 230Vac electromechanical geared motor operator is designed for sliding gates up to 1200 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 650 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 650, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 650 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 510 Max. absorbed current (A) 2.4 Max. torque (N) 1,000 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:32 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 13.5 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/633L JUNIOR 633 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 600 kg

Product Overview The FADINI JUNIOR 633 230Vac electromechanical geared motor operator is designed for sliding gates up to 600 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 633 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 633, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 633 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 400 Max. absorbed current (A) 2 Max. torque (N) 600 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:31 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 11.3 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI NYOTA 115 EVO | Electromechanical Geared Motor Operator for Sliding Gates | Powerful and Stylish

Product Overview The FADINI NYOTA 115 EVO electromechanical geared motor operator is a powerful and stylish solution for automating sliding gates. Available in 230 Vac and 400 Vac, it features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth operation. Key Features 230 Vac and 400 Vac geared motor operator Aluminium gearbox and cover for long-term durability Anti-crush system with encoder and amperometric detection Electronic brake, acceleration, and deceleration on each cycle Versatile range of models with various electric motors CE marked and tested for compliance Master/slave function for bi-parting sliding gates Product Description The FADINI NYOTA 115 EVO offers powerful and reliable performance for sliding gates, combining advanced technology with durable construction. The aluminium gear box and cover ensure longevity, while the anti-crush system provides enhanced safety by reversing gate travel upon detecting obstacles. This motor operator is available in several models, each tailored to different power requirements and gate weights. The electronic control unit can be incorporated inside the NYOTA 115 EVO or housed in a separate polycarbonate box, providing flexibility in installation. Programming gate travel is simplified with a button, and the system includes features such as electronic brake, acceleration, and deceleration for smooth operation. Specifications Feature0.5 HP - 1PH0.5 HP - 3PH1 HP - 1PH1 HP - 3PH Power supply (Vac – Hz) 230 - 50 230/400 - 50 230 - 50 230/400 - 50 Max. absorbed power (W) 600 575 1,130 1,030 Max. absorbed current (A) 3.2 2.1/1.2 5.7 3.7/2.2 Power yield (W) 0.37 0.37 0.73 0.73 Motor revolutions (rpm) 1,380 1,380 1,380 1,380 Capacitor (μF) 30 - 30/40 - Rated torque (Nm) 40 40 80 80 Travel speed (m/min) 10 10 10 10 Gear ratio 1/32 1/32 1/32 1/32 Working temperature (°C) -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 Motor thermal protection (°C) 160 160 160 160 Limit switch magnetic magnetic magnetic magnetic Grade of protection IP 55 55 55 55 Oil type F/706L F/706L F/706L F/706L Weight (kg) 18.5 18 20 19.5 Frequency of use very intensive very intensive very intensive very intensive Product Code List / Guide F/1113L - 230/400 Vac 3PH, 0.37 kW / 0.5 HP, 1,250 kg max weight F/1114L - 230/400 Vac 3PH, 0.73 kW / 1 HP, 1,850 kg max weight F/1116L - 230 Vac 1PH, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1117L - 230 Vac 1PH, 0.73 kW / 1 HP, 1,800 kg max weight F/1121L - 230 Vac 1PH, 0.37 kW / 0.5 HP, ELPRO 12 EVO, 1,200 kg max weight F/1122L - 230 Vac 1PH, 0.73 kW / 1 HP, ELPRO 12 EVO, 1,800 kg max weight F/1269L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1271L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, ELPRO 12 PLUS FN, 1,200 kg max weight Notes: Each code includes an electromechanical geared motor operator with pinion for the rack, anchoring base plate with screws for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The electronic control unit and encoder are included only for the code numbers as indicated in the chart. The gate structure, size, and possible strong winds may affect the value of indicated max. weight. Always make sure the gate is adequate to be automatically operated and remove any possible friction points. Reversible versions are possible to open or close by hand in case of power failure; no need for the release handle or release spanner to be operated.

FADINI DARDO 430 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 430 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 430 offers reliable and efficient gate automation. Key Features Quiet operation with 230 Vac irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 430 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 230 Vac irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 430 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 430 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 43 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 430, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 430 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Max. absorbed power: 300 W Max. absorbed current: 1.7 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 3,000 N Working temperature: -20°C to +50°C Motor thermal protection: 160°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 8 kg Frequency of use: Semi-intensive 35% Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI NUPI 66 | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI NUPI 66 is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and collective use. This operator combines safety, ease of installation, and high resistance to weather conditions, making it a reliable choice for gate automation. Key Features Safe operation with innovative valve assembly controlling thrust power Incorporated capacitor for enhanced performance Stylish design and high-quality materials for weather resistance Easy to install and adjust Quick-to-respond release system by key Tested and certified with CE marking Product Description The FADINI NUPI 66 oil-hydraulic operator is designed for the efficient automation of swing gates. It features an innovative valve assembly that allows for electronic control of the thrust power, ensuring safe and reliable operation. The stylish design and choice of high-quality materials make the NUPI 66 highly resistant to various weather conditions. Installation and adjustment of the NUPI 66 are straightforward, making it a practical choice for both residential and collective settings. The operator includes a quick-to-respond release system that can be easily accessed with a key, providing convenience in case of power failure or manual operation needs. The NUPI 66 is tested and certified, bearing the CE marking following rigorous type tests, ensuring compliance with European safety and performance standards. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Power yield: 180 W Max. absorbed current: 1.2 A Rod stroke: 235 mm Rod diameter: 16 mm Linear speed opening/closing: ~16 mm/s Opening force: 0 ÷ 5,100 N Closing force: 0 ÷ 6,200 N Working temperature: -25°C to +80°C Oil type: 708L Grade of protection: IP67 Weight: 9.5 kg Frequency of use: Intensive Note: Product includes an oil-hydraulic operator complete with rear and front fixing brackets to weld and two release keys. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm for residential and industrial use DISCREET For installation on gates where large pillars are involved: capable of a powerful though quiet action. Easy to install. OIL-HYDRAULIC Anti-crush safety ensured by the by-pass valves incorporated in the operator. Available with bidirectional oil-hydraulic locking device (irreversible). STRONG Cataphoresis treated steel, shearing preventing articulated arm. Manual override accessed by key. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Absorbed current (A) 1,2 Power yield (kW / HP) 0,18 / 0,25 Torque (Nm) 250-400 Shaft rotation 130° Opening-closing time (s) 23 Working temperature (°C) -20°C / +80°C Grade of protection IP 67 Oil type 708L Weight including arm(kg) 19 Frequency of use Semi-intensive   Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm, fixing bracket, two keys to access the release device. With gate leaves wider than 2 m it is required that an electric lock be fitted on to the gate.  

FADINI DRIVE 700 ESTRU | Hydraulic Motor-Pump for Swing Gates

Product Overview The FADINI DRIVE 700 ESTRU is a hydraulic motor-pump specifically designed for swing gates used in residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 ESTRU features a separately installed oil-hydraulic motor-pump, ensuring efficient operation and easy maintenance. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 ESTRU hydraulic motor-pump is designed to meet a wide range of installation requirements for swing gates. This motor-pump is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump is installed separately from the jack, which is housed in an aluminum foundation box for enhanced durability. The DRIVE 700 ESTRU offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700 ESTRU, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic motor-pump with joints, manual release knob, and electric power supply cable. An electric lock is required for the non-locking reversible version.

FADINI DRIVE 700 | Oil-Hydraulic Jack for Swing Gates

Product Overview The FADINI DRIVE 700 is an oil-hydraulic underground operator designed for swing gates in both residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 features an oil-hydraulic motor-pump installed separately from the jack, which is housed inside an aluminum foundation box with a steel fixing plate treated with electrolytic galvanization. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 oil-hydraulic jack is designed to meet a wide range of installation requirements for swing gates. This operator is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump and jack are installed separately, with the jack housed in an aluminum foundation box for enhanced durability. The DRIVE 700 offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic jack. The foundation box is not included. An electric lock is required for gate leaves wider than 2 meters.

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates OIL-HYDRAULIC The innovative EVO valve design allows, in a single model, to configure the hydraulic locking device as required: N reversible - non locking A locking in open position B locking in closed position BB bidirectional locking (locking in open and closed position) Hydraulic slowdown (braking) in opening only, in closing only, in opening and closing, or non braking at all. FUNCTIONAL Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by customized key. QUALITY Stylish design, external structure made of extruded anodized aluminium and accurate selection of high quality materials to ensure the utmost resistance to weather conditions. Easy to install: an adjustable ball bearing ring provides fixing on to the gate. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Rod stroke (mm) 150 280 400 Power supply (Vac – Hz) 230 - 50 230 - 50 230 - 50 Absorbed power (W) 250 250 250 Power yield (W) 180 180 180 Max. absorbed current (A) 1.2 1.2 1.2 Pump flow rate (l/min) 1,4 (P5) 1,4 (P5) | 0,85 (P3) 1,4 (P5) | 0,85 (P3) Rod diameter (mm) 20 20 20 Linear speed opening (mm/s) ~ 15 ~ 17 (P5) | ~ 11 (P3) ~ 17 (P5) | ~ 11 (P3) Linear speed closing (mm/s) ~ 14 ~ 14 (P5) | ~ 9 (P3) ~ 14 (P5) | ~ 9 (P3) Opening force (N) 0 ÷ 4.000 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) Closing force (N) 0 ÷ 5.600 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) Working temperature (°C) -25°C / +80°C -25°C / +80°C -25°C / +80°C Oil type 708L 708L 708L Grade of protection IP 67 67 67 Frequency of use very intensive very intensive very intensive Weight (kg) 9.5 11 14   PRODUCT GUIDE PRODUCT CODE (click to view) STROKE (mm) EVO HYDRAULIC LOCKING DEVICE BRAKING SLOWDOWN OPENING TIME (s) PUMP SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/870P5L 150 YES - ~10 P5 fast 1,5 300 F/87084P5L 150 YES YES ~10 + TR P5 fast 1,5 300 F/880P5L 280 YES - ~17 P5 fast 2,8 550 F/88084P5L 280 YES YES ~17 + TR P5 fast 2,8 550 F/880P3L 280 YES - ~26 P3 slow 3,2 550 F/88084P3L 280 YES YES ~26 + TR P3 slow 3,2 550 F/890P5L 400 YES - ~26 P5 fast 4 550 F/89084P5L 400 YES YES ~26 + TR P5 fast 4 550 F/890P3L 400 YES - ~37 P3 slow 4,5 550 F/89084P3L 400 YES YES ~37 + TR P3 slow 4,5 550 F/884P3L 400 - - ~ 45 P3 slow 8 550 F/88484P3L 400 - YES ~45 + TR P3 slow 8 550 TECHNICAL NOTES For gates wider than 2 m per leaf it is required that an electric lock be fitted. With gate leaves wider than 4 m, the reversible version (no hydraulic locking device) is recommended plus an electric lock on the gate. With all HINDI 880 EVO actuators whose valve configuration is reversible (no hydraulic locking device), an electric lock is required on to the gate. On request, HINDI 880 EVO P10 faster (twice as much approx.) than P5 model: it is advisable to consult our technical office for such installations. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

FADINI MEC 700/80 Ventil Motor Pump for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motor pump. TECHNICAL DATA - MEC 700/80 VENTIL MOTOR PUMP  Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 510 Absorbed current (A) 2,4 Max. pressure (atm) 40 Hydraulic pump flow rate (l/min) 1,6 [P6] | 2,6 [P12] Working temperature (°C) -25°C / 80°C Grade of protection IP/motor-pump 65 Oil type 708L Weight – code 7014P6L (kg) 10 Weight – code 7012L (kg) 5,5 Weight – code 7037L (kg) 7,2 Frequency of use Intensive   PRODUCT GUIDE PRODUCT CODE (click to view) HYDRAULIC LOCKING PUMP RESERVOIR TYPE F/7014P6L reversible P6 slow single F/7014P12L reversible P12 fast single F/7022P6L bidirectional P6 slow single F/7022P12L bidirectional P12 fast single F/701486P6L reversible P6 slow double F/701486P12L reversible P12 fast double F/702286P6L bidirectional P6 slow double F/702286P12L bidirectional P12 fast double   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes an oil-hydraulic motor-pump complete with joints, manual release knob and electric cable for power supply.

FADINI MEC 800 Special swing gate operator for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motorpump. TECHNICAL DATA - MEC 800 Special Rod diameter (mm) 22 Piston stroke (mm) 280 / 400 / 500 / 600 / 700 / 800 / 900 / 1.000 mm Force (N) 0 ÷ 7.000 N   PRODUCT GUIDE PRODUCT CODE (click to view) ROD STROKE (mm) BRAKING SLOWDOWN SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/7012L 280 - 2.8 400 F/701284L 280 on opening / closing 2.8 400 F/7037L 400 - 4 700 F/703784L 400 on opening / closing 4 700 F/7114L 500 - 5 700 F/711484L 500 on opening / closing 5 700 F/7115L 600 - 6 800 F/711584L 600 on opening / closing 6 800 F/7116L 700 - 7 900 F/711684L 700 on opening / closing 7 900 F/7117L 800 - 8 1000 F/711784L 800 on opening / closing 8 1000 F/7118L 900 - 9 1100 F/711884L 900 on opening / closing 9 1100 F/7119L 1000 - 10 1200 F/711984L 1000 on opening / closing 10 1200   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes a double-acting oil-hydraulic actuator complete with rear and front fixing plates to weld, joints and protection cover. [I]: TR is the slowdown time, a value changing according to the adjustment made on the actuator. [K]: The installation distances for the special strokes are meant to make the most of the slowdown on opening and closing. For these actuators contact our technical office in advance and provide the structural dimensions of the gate to be automated.

FADINI COMBI 787 | Oil-Hydraulic Underground Operator for Large Swing Gate

Product Overview The FADINI COMBI 787 is an oil-hydraulic underground operator designed for large swing gates, offering a discreet and robust solution for gate automation. This operator is housed inside a treated steel foundation box, providing high resistance to corrosion. The foundation box is also available in AISI 304 stainless steel as an option. The COMBI 787 is capable of a 110° shaft rotation angle, ensuring reliable and quiet operations. Key Features Oil-hydraulic motor-pump unit with integrated cylinder 110° shaft rotation angle Available with or without hydraulic locking device Hydraulic slowdown (braking) in opening and closing Flow regulator for precise control Anti-crush safety ensured by by-pass valves Easy emergency release from both inside and outside the gate Durable foundation box made of 5 mm thick electrolytically galvanized steel Optional AISI 304 stainless steel foundation box No particular maintenance required Product Description The FADINI COMBI 787 oil-hydraulic underground operator is designed for large swing gates, combining strength and discretion in a single, all-in-one unit. This operator is housed in a robust foundation box made of treated steel, ensuring high resistance to corrosion. The foundation box can accommodate mechanical gate stops, adjustable in both open and closed positions, and allows for installation or removal without detaching the gate. The COMBI 787 is available in various versions to meet different installation requirements. Options include reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, units with hydraulic slowdown (braking) in opening and closing, and units with flow regulators. The anti-crush safety feature is ensured by by-pass valves fitted to the operator. Emergency release is straightforward, thanks to a pressed steel bracket that is easy to operate from both inside and outside the gate using a specially designed spanner with an ergonomic grip. The operator is designed for intensive use, making it suitable for high-frequency operations. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 330 W Absorbed current: 1.8 A Power yield: 0.24 kW / 0.33 HP Torque: 250-400 Nm Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Opening/closing time: ~23 s (110°) Weight including box: 34 kg Frequency of use: Intensive Product Guide CODEBIDIRECTIONAL HYDRAULIC LOCKINGSLOWDOWN BRAKINGFLOW REGULATORSINGLE GATE MAXIMUM WIDTH (m)SINGLE GATE MAXIMUM WEIGHT (kg) F/787N3L NO NO NO 6 1000 F/7877BB3L YES NO NO 6 1000 F/78778BB3L YES YES NO 6 1000 F/787789BB3L YES YES YES 6 1000 F/7878N3L NO YES NO 6 1000 F/78789N3L NO YES YES 6 1000 F/78779BB3L YES NO YES 6 1000 F/7879N3L NO NO YES 6 1000 Note: Each code includes an oil-hydraulic operator complete with electric power supply cable. For codes including the letter “N” (non-locking, reversible), an electric lock is required. An electric lock is also necessary for gate leaves wider than 2 meters.

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° or 175° (click to view) shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 23 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/767N3DXL RIGHT NO NO NO 3 700 F/767N3SXL LEFT NO NO NO 3 700 F/7677BB3DXL RIGHT YES NO NO 3 700 F/7677BB3SXL LEFT YES NO NO 3 700 F/76778BB3DXL RIGHT YES YES NO 4 700 F/76778BB3SXL LEFT YES YES NO 4 700 F/767789BB3DXL RIGHT YES YES YES 4 700 F/767789BB3SXL LEFT YES YES YES 4 700 F/76779BB3DXL RIGHT YES NO YES 4 700 F/76779BB3SXL LEFT YES NO YES 4 700 F/7678N3DXL RIGHT NO YES NO 4 700 F/7678N3SXL LEFT NO YES NO 4 700 F/76789N3DXL RIGHT NO YES YES 4 700 F/76789N3SXL LEFT NO YES YES 4 700 F/7679N3DXL RIGHT NO NO YES 4 700 F/7679N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° (click to view) or 175° shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 28 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/769N3DXL RIGHT NO NO NO 3 700 F/769N3SXL LEFT NO NO NO 3 700 F/7697BB3DXL RIGHT YES NO NO 3 700 F/7697BB3SXL LEFT YES NO NO 3 700 F/76978BB3DXL RIGHT YES YES NO 4 700 F/76978BB3SXL LEFT YES YES NO 4 700 F/769789BB3DXL RIGHT YES YES YES 4 700 F/769789BB3SXL LEFT YES YES YES 4 700 F/76979BB3DXL RIGHT YES NO YES 4 700 F/76979BB3SXL LEFT YES NO YES 4 700 F/7698N3DXL RIGHT NO YES NO 4 700 F/7698N3SXL LEFT NO YES NO 4 700 F/76989N3DXL RIGHT NO YES YES 4 700 F/76989N3SXL LEFT NO YES YES 4 700 F/7699N3DXL RIGHT NO NO YES 4 700 F/7699N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

FAAC 844 R 109838 Gearmotor for Sliding Gates - Replacement Motor

Product Overview The FAAC 844 R 109838 gearmotor is designed as a direct replacement for broken or damaged sliding gate motors, providing robust performance and durability. Key Features Direct replacement for FAAC 844 R 109838 gate motors Suitable for sliding gates with a maximum weight of 1800kg Maximum gate length up to 40000mm Above ground installation Electromechanical motor for reliable operation Mechanically locking motor ensures secure gate closure Power supply voltage of 230v Motor voltage of 230v Gate speed of 10 meters per minute Semi-intensive duty cycle suitable for moderate use IP44 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 844 R 109838 gearmotor is suitable for various sliding gate applications, offering ease of installation and compatibility with existing gate setups. It is ideal for residential and commercial use where reliability and performance are key.

FAAC 415 LS 24V 1044161 Electro-Mechanical Operator for Swing Gates

Product Overview The FAAC 415 LS 24V 1044161 electro-mechanical swing gate operator is designed as a direct replacement for damaged or broken gate motors, offering reliable performance and ease of installation. Key Features Direct replacement for FAAC 415 LS 24V 1044161 gate motors Suitable for swing gates with a maximum weight of 300kg Maximum gate length per leaf up to 3000mm Above ground installation Maximum opening angle of 110 degrees Electro-mechanical motor for durable and efficient operation Mechanically locking motor for secure gate closure Power supply voltage of 230v Motor voltage of 24v Gate speed of 15 seconds for 90 degrees movement Very-intensive duty cycle suitable for high-frequency use IP44 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 415 LS 24V 1044161 is designed to fit seamlessly into existing gate installations, providing robust operation and longevity. It is ideal for residential and light commercial applications where reliability and performance are critical.

FAAC 400 SBS Long Hydraulic Operator for Swing Gates - Specifications and Features

Product Overview The FAAC 400 SBS Long hydraulic swing gate operator is an ideal replacement for broken or damaged gate motors, offering reliable performance and enhanced features for swing gate applications. Key Features Direct replacement for FAAC 400 SBS gate motors Suitable for swing gates with a maximum weight of 650kg Maximum gate length per leaf up to 7000mm Above ground installation Maximum opening angle of 125 degrees Hydraulic motor for robust and smooth operation Requires solenoid lock for secure gate closure Power supply voltage of 230v Motor voltage of 230v Gate speed of 24 seconds for 90 degrees movement Semi-intensive duty cycle suitable for frequent use IP55 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 400 SBS Long is designed to fit seamlessly into existing gate installations, providing robust operation and longevity. It is suitable for both residential and light commercial applications where reliability and performance are essential.

FAAC S800 ENC CBAC 100° | Hydraulic Underground Operator for Swing Gates | 230V

Product Overview The FAAC S800 ENC CBAC 100° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 2 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 100 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 2 Year Warranty Product Description The FAAC S800 ENC CBAC 100° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 2 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 ENC CBAC features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 ENC CBAC includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 2000mm Installation type: Underground Max opening angle: 100 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 Warranty: 2 years 2-Year Warranty The FAAC S800 ENC CBAC 100° comes with a 2-year warranty, ensuring peace of mind and reliable performance.

FAAC S800 ENC CBAC 180° | Underground Hydraulic Operator for Swing Gates | 230V

Product Overview The FAAC S800 ENC CBAC 180° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 2 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 180 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 2 Year Warranty Product Description The FAAC S800 ENC CBAC 180° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 2 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 ENC CBAC features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 ENC CBAC includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 2000mm Installation type: Underground Max opening angle: 180 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 Warranty: 2 years 2-Year Warranty The FAAC S800 ENC CBAC 180° comes with a 2-year warranty, ensuring peace of mind and reliable performance.

FAAC S800 ENC SBW 100° | Underground Hydraulic Operator for Swing Gates | 230V

Product Overview The FAAC S800 ENC SBW 100° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 4 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 100 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 2 Year Guarantee Product Description The FAAC S800 ENC SBW 100° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 4 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 ENC SBW features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 ENC SBW includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 4000mm Installation type: Underground Max opening angle: 100 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 Guarantee: 2 years 2-Year Guarantee The FAAC S800 ENC SBW 100° comes with a 2-year guarantee, ensuring peace of mind and reliable performance.

FAAC S800 ENC SBW 180° | Underground Hydraulic Operator for Swing Gates | 230V

Product Overview The FAAC S800 ENC SBW 180° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 4 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 180 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 2 Year Guarantee Product Description The FAAC S800 ENC SBW 180° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 4 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 ENC SBW features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 ENC SBW includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 4000mm Installation type: Underground Max opening angle: 180 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 Guarantee: 2 years 2-Year Guarantee The FAAC S800 ENC SBW 180° comes with a 2-year guarantee, ensuring peace of mind and reliable performance.

FAAC S800 230v CBAC 180° | Underground Hydraulic Operator for Swing Gates

Product Overview The FAAC S800 230v CBAC 180° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 2 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 180 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Semi-Intensive Protection rating: IP67 Product Description The FAAC S800 230v CBAC 180° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 2 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 2000mm Installation type: Underground Max opening angle: 180 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Semi-Intensive Protection rating: IP67

FAAC S800 230v CBAC 100° | Underground Hydraulic Operator for Swing Gates

Product Overview The S800 230v CBAC 100° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 2 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Locking method: Opening and closing hydraulic lock Max opening angle: 100 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Semi-intensive Protection rating: IP 67 Product Description The S800 230v CBAC 100° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 2 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 2000mm Installation type: Underground Max opening angle: 100 degrees Motor type: Hydraulic Locking method: Opening and closing hydraulic lock Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Semi-intensive Protection rating: IP 67 Shipping Index The FAAC S800 230v CBAC 100° is shipped with all necessary components for installation and operation, ensuring a complete and hassle-free experience for the installer.

FAAC 750 opening jack 100 degree Underground hydraulic operator motor only

2 Year guarantee Replacement 750 Jack only Does not include collar - call for price FAAC spare parts

FAAC 750 opening jack 180degree Underground hydraulic operator motor only

2 Year guarantee 750 jack only  Does not include collar - call for price

FAAC S800 230V SBW 100° | Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800 230V SBW 100° is a 230V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 230V hydraulic underground operator motor Suitable for swing gates up to 4 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Technical Specifications Power Input: 220W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Max Opening Angle: 100 Degrees Motor: Hydraulic Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 230V Gate Speed: 12 Seconds to 90 Degrees Duty Cycle: Semi-Intensive Protection Rating: IP 67 Motor Range: S800H Category: Swing Gate Motor Product Description The FAAC S800 230V SBW 100° is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 4 meters in length. This 230V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800 230V SBW 100° offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800 230V SBW 100° hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC S800 230V SBW 180° | Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800 230V SBW 180° is a 230V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 230V hydraulic underground operator motor Suitable for swing gates up to 4 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Technical Specifications Power Input: 220W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Max Opening Angle: 180 Degrees Motor: Hydraulic Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 230V Gate Speed: 12 Seconds to 90 Degrees Duty Cycle: Semi-Intensive Protection Rating: IP 67 Motor Range: S800H Category: Swing Gate Motor Product Description The FAAC S800 230V SBW 180° is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 4 meters in length. This 230V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800 230V SBW 180° offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800 230V SBW 180° hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC Gearmotor for sliding gates with built in control board 740 E Z16

2 Year guarantee

FAAC 741 E Z16 | Gearmotor for Sliding Gates | Up to 800Kg with Built-in Control Board

Product Overview The FAAC 741 E Z16 is a high-performance gearmotor designed for sliding gates up to 800Kg. This 230V gearmotor comes with a built-in control board, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 800Kg. 230V operational voltage. Built-in control board for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 741 E Z16 1097815 models. Includes full technical support for installation and setup. Product Description FAAC 741 E Z16 | Gearmotor for Sliding Gates | Up to 800Kg with Built-in Control Board The FAAC 741 E Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 800Kg. Designed for 230V power supply, this gearmotor features an integrated control board, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 741 E Z16 1097815 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 800Kg Power Supply 230V Control Board Built-in Product Code 741 E Z16 1097815 For those looking to replace their existing FAAC 741 E Z16 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 746 ER Z16 | Gearmotor for Sliding Gates | Up to 600Kg with Built-in Control Panel

Product Overview The FAAC 746 ER Z16 is a high-performance gearmotor designed for sliding gates up to 600Kg. This 230V gearmotor comes with a built-in control panel, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 600Kg. 230V operational voltage. Built-in control panel for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 746 ER Z16 109776 models. Includes full technical support for installation and setup. Product Description FAAC 746 ER Z16 | Gearmotor for Sliding Gates | Up to 600Kg with Built-in Control Panel The FAAC 746 ER Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 600Kg. Designed for 230V power supply, this gearmotor features an integrated control panel, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 746 ER Z16 109776 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 600Kg Power Supply 230V Control Panel Built-in Product Code 746 ER Z16 109776 For those looking to replace their existing FAAC 746 ER Z16 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 746 ER Z20 | Gearmotor for Sliding Gates | Up to 400Kg with Built-in Control Panel

Product Overview The FAAC 746 ER Z20 is a high-performance gearmotor designed for sliding gates up to 400Kg. This 230V gearmotor comes with a built-in control panel, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 400Kg. 230V operational voltage. Built-in control panel for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 746 ER Z20 109773 models. Includes full technical support for installation and setup. Product Description FAAC 746 ER Z20 | Gearmotor for Sliding Gates | Up to 400Kg with Built-in Control Panel The FAAC 746 ER Z20 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 400Kg. Designed for 230V power supply, this gearmotor features an integrated control panel, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 746 ER Z20 109773 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 400Kg Power Supply 230V Control Panel Built-in Product Code 746 ER Z20 109773 For those looking to replace their existing FAAC 746 ER Z20 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 844 1ER Z16 | Gearmotor with Built-in Control Board | Sliding Gates

Product Overview The FAAC 844 1ER Z16 is a robust gearmotor designed for sliding gates in commercial and industrial applications. Featuring a built-in control board, this gearmotor ensures seamless operation and enhanced safety with anti-crushing protection. Ideal for rack applications, the 844 1ER Z16 is a reliable choice for heavy-duty gate automation. Key Features Suitable for commercial and industrial sliding gate applications. Includes built-in control board for integrated operation. Anti-crushing safety feature for enhanced protection. Non-reversible motor ensures secure operation. Manual release device for operation during power failures. Twin-disk clutch in oil-bath for smooth performance. Inductive or magnetic limit switch options. 2-year guarantee for peace of mind. Product Description FAAC 844 1ER Z16 | Gearmotor with Built-in Control Board | Sliding Gates The FAAC 844 1ER Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates in demanding commercial and industrial environments. This gearmotor is specifically designed for rack applications, ensuring smooth and efficient operation for heavy-duty gates. Equipped with a built-in control board, the 844 1ER Z16 simplifies installation and enhances the overall functionality of the gate system. The non-reversible motor offers secure operation, while the anti-crushing safety feature provides essential protection against accidents. In the event of a power failure, the key-operated release device allows for manual opening and closing of the gate, ensuring continued access and security. The twin-disk clutch in an oil-bath delivers reliable performance, and the gearmotor offers the choice of inductive or magnetic limit switches for precise control. Technical Specifications SpecificationDetails Application Commercial and Industrial Sliding Gates Motor Type Non-reversible Control Board Built-in Safety Features Anti-crushing Manual Release Key-operated Clutch Twin-disk in oil-bath Limit Switch Inductive or Magnetic Guarantee 2 Years The FAAC 844 1ER Z16 gearmotor is a robust and reliable solution for heavy-duty sliding gate automation in commercial and industrial settings, offering advanced features and secure operation.

FAAC 844 R Z12 REVERSIBLE 109897 | Gearmotor for Sliding Gates Up to 1000kg

Product Overview The FAAC 844 R Z12 REVERSIBLE 109897 is a robust and reliable gearmotor designed for sliding gates with a maximum weight of 1000kg per gate. This electromechanical motor is ideal for replacing broken or damaged gate motors, ensuring smooth and efficient operation for residential and commercial properties. With its reversible functionality, this motor provides flexibility and enhanced performance. Key Features Reversible gearmotor for sliding gates Suitable for gates up to 1000kg Electromechanical motor for reliable performance Requires solenoid lock for secure operation Quick and easy replacement for broken or damaged motors Power input: 550W Max gate length: 40000mm Gate speed: 12 m/min Protection rating: IP 44 Duty cycle: Semi-intensive Technical Specifications Power Input: 550W Gate Type: Sliding Gate Max Weight Per Gate: 1000kg Max Length Per Gate: 40000mm Above Or Underground: Above Ground Motor: Electromechanical Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 230V Gate Speed: 12 M/Min Duty Cycle: Semi-Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Product Description The FAAC 844 R Z12 REVERSIBLE 109897 gearmotor is designed to provide reliable and efficient automation for sliding gates up to 1000kg in weight. This motor is perfect for replacing broken or damaged gate motors, ensuring continuous and smooth operation for residential and commercial sliding gates. With its reversible functionality, the FAAC 844 R Z12 offers enhanced flexibility and performance. This electromechanical motor operates with a power input of 550W and a gate speed of 12 meters per minute, making it suitable for semi-intensive use. The motor requires a solenoid lock for secure operation and is designed for above-ground installation. Its integrated features and robust construction ensure long-lasting durability and reliability. The FAAC 844 R Z12 REVERSIBLE 109897 is easy to install and replace, making it an ideal choice for users looking to replace their broken or damaged gate motors. With its comprehensive technical specifications, this motor guarantees efficient and effective gate automation. Note: This product is the motor only and does not include the control panel. Order before 2pm for next working day delivery, subject to stock availability.

FAAC 230v hydraulic operator for swing gates 402 CBC

FAAC 402 CBC 104468 Looking to replace a broken FAAC 402 CBC 104468. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates 402 SB

FAAC 402 SB 104469 Looking to replace a broken FAAC 402 SB 104469. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates 402 SBS

FAAC 402 SBS 104474 Looking to replace a broken FAAC 402 SBS 104474. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates motor only 422 CBC

FAAC 422 CBC 104208 Looking to replace a broken FAAC 422 CBC 104208. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates motor only 422 CBACS

FAAC 422 CBACS 0-75L 104209 Looking to replace a broken FAAC 422 CBACS 0-75L 104209. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 422 SBS

2 Year guarantee

FAAC Hydraulic operator for swing gates 422 CBAC

2 Year guarantee

FAAC Hydraulic operator for swing gates 422 SB

FAAC 422 SB 1L 104212 Looking to replace a broken FAAC 422 SB 1L 104212. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 400 CBC

2 year guarantee Replacement FAAC Gate Motor Only FAAC Spare parts online   

FAAC Hydraulic operator for swing gates 400 SB

FAAC 400 SB 104206 Looking to replace a broken FAAC 400 SB 104206. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 400 CBA

FAAC 400 CBA 104215 Looking to replace a broken FAAC 400 CBA 104215. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 400 SBS

FAAC 400 SBS 104203 Looking to replace a broken FAAC 400 SBS 104203. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 400 CBAC

FAAC 400 CBAC 104201 Looking to replace a broken FAAC 400 CBAC 104201. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 400 CBACR 230v

FAAC 400 CBACR Strong & Durable Hydraulic Motor Most powerful motor for the largest gates. More durable with fewer moving parts. Can easily be repaired by replacing the seals and the oil. The motor can be back in service for years to come.   Quick & Easy Installation Equipment designed for the quick & easy installation of existing hinged swing gates.

FAAC Hydraulic operator for swing gates 400 CBAC LONG

FAAC 400 CBAC LONG 104202 Looking to replace a broken FAAC 400 CBAC LONG 104202. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

FAAC 400 SB LONG KIT | Hydraulic Operator for Swing Gates Up to 2.5m

Product Overview The FAAC 400 SB LONG KIT is a comprehensive hydraulic operator kit designed for residential, condominium, and industrial swing gates with leaves up to 2.5 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring strong and durable hydraulic motors for reliable performance. The long version of this operator kit is ideal for large and heavy gates, ensuring durability and longevity with minimal maintenance. Key Features Double operator kit for swing gates Suitable for gates up to 2.5 meters per leaf Strong and durable hydraulic motors LCD control panel for simplified programming Quick and easy installation Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC 400 SB LONG KIT is designed to provide robust and reliable automation for swing gates up to 2.5 meters in length per leaf. This kit includes powerful 230V hydraulic motors that ensure smooth and efficient gate operation. The strong and durable motors are designed to handle large gates, offering longevity and minimal maintenance by easily replacing seals and oil when needed. The control panel with an LCD display allows for straightforward programming and management, making it user-friendly and efficient. This kit is designed for quick and easy installation, making it suitable for residential, condominium, and industrial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 400 SB LONG KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC 400 SB LONG 230V Operators 1 x FAAC 455D Control Board 1 x FAAC Control Board Housing 1 x FAAC 868 SLH Plug-in receiver/decoder 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20 D Pair of Photocells Installation manual and hardware

FAAC 230v Underground electro mechanical operator 770N MOTOR ONLY

FAAC 770N 230V 10675201 Looking to replace a broken FAAC 770N 230V 10675201. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 750 SB Pump Unit | Motor Only | Direct Replacement for 107721

Product Overview The FAAC 750 SB Pump Unit (Part Number: 107721) is a high-quality replacement motor designed for gate automation systems. This pump unit is intended for those needing a direct replacement for a broken or damaged FAAC 750 SB Pump Unit. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring reliable performance and durability. Key Features Direct replacement for FAAC 750 SB Pump Unit (Part Number: 107721). High-quality, genuine FAAC product. Brand new motor for optimal performance and reliability. Expert advice and full technical support available. Product Description FAAC 750 SB Pump Unit | Motor Only | Direct Replacement for 107721 The FAAC 750 SB Pump Unit is specifically designed to serve as a direct replacement for the FAAC 750 SB Pump Unit (Part Number: 107721). This pump unit motor is essential for ensuring the smooth operation of your gate automation system. Whether you're dealing with a broken or damaged pump unit, this replacement part will help you get your installation back up and running efficiently. Our FAAC 750 SB Pump Units are all genuine and brand new, sourced directly from the manufacturer. This ensures that you receive a high-quality product that meets the exact specifications and standards set by FAAC. Additionally, we provide full technical support and expert advice to assist you in the installation and maintenance of your pump unit. Technical Specifications SpecificationDetails Product Type Hydraulic Pump Unit Motor Model 750 SB Part Number 107721 Application Gate Automation Systems Condition Brand New Manufacturer FAAC For those looking to replace their existing FAAC 750 SB Pump Unit, this motor-only option provides a seamless fit and restores the functionality of your gate automation system. Contact our support team for any technical assistance you may require during installation.

FAAC 413 104413 | 230V Electro Mechanical Operator for Swing Gates

Product Overview The FAAC 413 104413 is a 230V electro mechanical operator designed for swing gates with a maximum length of 2.5 meters and a weight of up to 200kg per gate. This motor serves as a direct replacement for your broken or damaged FAAC 413 104413 gate motor, ensuring reliable and efficient operation of your swing gates. All motors are brand new, genuine, and sourced directly from the manufacturer in the UK, providing you with full advice and technical support to get your installation back up and running smoothly. Key Features 230V electro mechanical operator for swing gates Suitable for gates up to 2.5 meters in length and 200kg in weight Direct replacement for FAAC 413 104413 gate motor Brand new and genuine, sourced directly from the manufacturer Provides reliable and efficient gate operation Full advice and technical support available Product Description The FAAC 413 104413 electro mechanical operator is engineered to provide robust and efficient automation for swing gates. Designed to handle gates up to 2.5 meters in length and 200kg in weight, this 230V motor ensures smooth and reliable gate movement. It serves as a direct replacement for the FAAC 413 104413 model, making it an ideal choice for those looking to replace their broken or damaged gate motor. This motor does not include limit switches to stop the gates in the open and closed positions. Therefore, it is essential to have ground stops on the gates to ensure proper operation. The motor's installation is straightforward, and full advice and technical support are available to assist you in getting your gate system back to optimal functionality. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: FAAC 413 104413 Power Supply: 230V Gate Type: Swing Gates Max Gate Leaf Length: 2.5 meters Max Gate Leaf Weight: 200kg Includes: Motor only Limit Switches: Not included, ground stops required Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 LS 104414 | Electro Mechanical Operator for Swing Gates

Product Overview The FAAC 413 LS 104414 is a 230V electro mechanical operator designed for swing gates with a maximum length of 2.5 meters. This motor includes adjustable limit switches to stop the gates in the open and closed positions, providing precise control and reliable operation. It serves as a direct replacement for your broken or damaged FAAC 413 LS 104414 gate motor, ensuring efficient and smooth functionality of your swing gates. All motors are brand new, genuine, and sourced directly from the manufacturer in the UK, offering full advice and technical support to get your installation back up and running seamlessly. Key Features 230V electro mechanical operator for swing gates Suitable for gates up to 2.5 meters in length Includes adjustable limit switches for precise control Direct replacement for FAAC 413 LS 104414 gate motor Brand new and genuine, sourced directly from the manufacturer Provides reliable and efficient gate operation Full advice and technical support available Product Description The FAAC 413 LS 104414 electro mechanical operator is designed to offer robust and efficient automation for swing gates. Suitable for gates up to 2.5 meters in length, this 230V motor ensures smooth and reliable movement. The LS model includes adjustable limit switches, allowing you to set precise stop points for the gates in both the open and closed positions, eliminating the need for ground stops. This motor is an ideal replacement for the FAAC 413 LS 104414 model, making it perfect for those looking to replace their broken or damaged gate motor. The installation process is straightforward, and full advice and technical support are available to assist you in restoring your gate system to optimal functionality. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: FAAC 413 LS 104414 Power Supply: 230V Gate Type: Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motor only Limit Switches: Adjustable Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC Electro mechanical operator for swing gates 415 230v

2 Year guarantee FAAC 415 Motor only Replacement Motor  

FAAC 415 LS | 230V Electro-Mechanical Operator for Swing Gates | Up to 3m

Product Overview The FAAC 415 LS is a high-performance 230V electro-mechanical operator designed for swing gates up to 3 meters. This motor is an ideal replacement for broken or damaged FAAC 415 LS 24V 1044161 gate motors, ensuring reliable and efficient operation. All our gate motors are brand new, genuine, and sourced directly from the manufacturer in the UK, providing you with full technical support to get your installation back up and running smoothly. Key Features Suitable for swing gates up to 3 meters. 230V electro-mechanical operator for robust performance. Direct replacement for FAAC 415 LS 24V 1044161 models. Genuine FAAC product with manufacturer support. Includes full technical support for installation and setup. Brand new motor ensuring optimal performance and reliability. Product Description FAAC 415 LS | 230V Electro-Mechanical Operator for Swing Gates | Up to 3m The FAAC 415 LS is a robust and reliable 230V electro-mechanical operator designed to automate swing gates up to 3 meters in length. This motor serves as a direct replacement for the FAAC 415 LS 24V 1044161, making it a perfect choice for those looking to replace their existing gate motor with a high-quality, genuine FAAC product. Our FAAC 415 LS motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a product that meets the highest standards of quality and performance. The motor is designed for easy installation and integration into your existing gate automation system, with full technical support available to assist you every step of the way. Technical Specifications SpecificationDetails Power Supply 230V Gate Compatibility Swing Gates Up to 3m Operation Electro-Mechanical Replacement For FAAC 415 LS 24V 1044161 Condition Brand New Manufacturer FAAC For those looking to replace their existing FAAC 415 LS gate motor, this 230V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

FAAC Electro mechanical 230v operator for swing gates 415 L

2 Year guarantee

FAAC 415 L LS | 230V Electro-Mechanical Operator for Swing Gates | Up to 4m

Product Overview The FAAC 415 L LS is a high-performance 230V electro-mechanical operator designed for swing gates up to 4 meters. This motor is an ideal replacement for broken or damaged FAAC 415 L LS 104418 gate motors, ensuring reliable and efficient operation. All our gate motors are brand new, genuine, and sourced directly from the manufacturer in the UK, providing you with full technical support to get your installation back up and running smoothly. Key Features Suitable for swing gates up to 4 meters. 230V electro-mechanical operator for robust performance. Direct replacement for FAAC 415 L LS 104418 models. Genuine FAAC product with manufacturer support. Includes full technical support for installation and setup. Brand new motor ensuring optimal performance and reliability. Product Description FAAC 415 L LS | 230V Electro-Mechanical Operator for Swing Gates | Up to 4m The FAAC 415 L LS is a robust and reliable 230V electro-mechanical operator designed to automate swing gates up to 4 meters in length. This motor serves as a direct replacement for the FAAC 415 L LS 104418, making it a perfect choice for those looking to replace their existing gate motor with a high-quality, genuine FAAC product. Our FAAC 415 L LS motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a product that meets the highest standards of quality and performance. The motor is designed for easy installation and integration into your existing gate automation system, with full technical support available to assist you every step of the way. Technical Specifications SpecificationDetails Power Supply 230V Gate Compatibility Swing Gates Up to 4m Operation Electro-Mechanical Replacement For FAAC 415 L LS 104418 Condition Brand New Manufacturer FAAC For those looking to replace their existing FAAC 415 L LS gate motor, this 230V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.