ROGER TECHNOLOGY MONOS4 Brushless Motor | 24V or 230V | Up to 4m

Product Overview The MONOS4 Brushless Motor is an electromechanical operator designed for swing gates with leaves up to 4 meters in length. Available in two variants, 24V for super intensive use and 230V AC, this motor features a telescopic arm and an irreversible design, ensuring robust and reliable performance. The 24V version includes a digital native encoder onboard for precise control. Key Features Suitable for swing gates with leaves up to 4m Available in 24V or 230V variants Irreversible design for secure operation Telescopic arm for flexible installation Super intensive use capability (24V) Specifications Property24V230V Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V 230V AC Power rating 200W 200W Frequency of use Intensive use 30% Thrust 2200N 2400N Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP44 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 2.10 cm/s 1.66 cm/s Opening time 19-35 s 24 s Stroke 400 mm 400 mm Limit switch - - Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR - Operating cycles per day 700 (opening/closing - 24 hours no stop) - Maximum dimension product (L x W x H) 1223 x 178 x 111 mm 1223 x 178 x 111 mm Note: Actual product may differ from photo.

FADINI DARDO 430 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 430 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 430 offers reliable and efficient gate automation. Key Features Quiet operation with 230 Vac irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 430 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 230 Vac irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 430 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 430 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 43 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 430, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 430 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Max. absorbed power: 300 W Max. absorbed current: 1.7 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 3,000 N Working temperature: -20°C to +50°C Motor thermal protection: 160°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 8 kg Frequency of use: Semi-intensive 35% Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI NUPI 66 | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI NUPI 66 is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and collective use. This operator combines safety, ease of installation, and high resistance to weather conditions, making it a reliable choice for gate automation. Key Features Safe operation with innovative valve assembly controlling thrust power Incorporated capacitor for enhanced performance Stylish design and high-quality materials for weather resistance Easy to install and adjust Quick-to-respond release system by key Tested and certified with CE marking Product Description The FADINI NUPI 66 oil-hydraulic operator is designed for the efficient automation of swing gates. It features an innovative valve assembly that allows for electronic control of the thrust power, ensuring safe and reliable operation. The stylish design and choice of high-quality materials make the NUPI 66 highly resistant to various weather conditions. Installation and adjustment of the NUPI 66 are straightforward, making it a practical choice for both residential and collective settings. The operator includes a quick-to-respond release system that can be easily accessed with a key, providing convenience in case of power failure or manual operation needs. The NUPI 66 is tested and certified, bearing the CE marking following rigorous type tests, ensuring compliance with European safety and performance standards. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Power yield: 180 W Max. absorbed current: 1.2 A Rod stroke: 235 mm Rod diameter: 16 mm Linear speed opening/closing: ~16 mm/s Opening force: 0 ÷ 5,100 N Closing force: 0 ÷ 6,200 N Working temperature: -25°C to +80°C Oil type: 708L Grade of protection: IP67 Weight: 9.5 kg Frequency of use: Intensive Note: Product includes an oil-hydraulic operator complete with rear and front fixing brackets to weld and two release keys. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm for residential and industrial use DISCREET For installation on gates where large pillars are involved: capable of a powerful though quiet action. Easy to install. OIL-HYDRAULIC Anti-crush safety ensured by the by-pass valves incorporated in the operator. Available with bidirectional oil-hydraulic locking device (irreversible). STRONG Cataphoresis treated steel, shearing preventing articulated arm. Manual override accessed by key. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Absorbed current (A) 1,2 Power yield (kW / HP) 0,18 / 0,25 Torque (Nm) 250-400 Shaft rotation 130° Opening-closing time (s) 23 Working temperature (°C) -20°C / +80°C Grade of protection IP 67 Oil type 708L Weight including arm(kg) 19 Frequency of use Semi-intensive   Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm, fixing bracket, two keys to access the release device. With gate leaves wider than 2 m it is required that an electric lock be fitted on to the gate.  

CAME F1000 - 230V | Self-Locking Motor with Articulated Arm | Swing Gates

Product Overview The CAME F1000 230V Self-Locking Motor with Articulated Arm is a robust solution for swing gates, designed to replace broken or damaged gate motors seamlessly. This motor is ideal for residential and medium-duty applications, offering reliable performance for gates up to 4 meters in width and 800 kg in weight. Key Features Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Installation Type: Above Ground Max Opening Angle: 90 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 230V Gate Speed: 18 Seconds for 90 Degrees Duty Cycle: Semi-Intensive Protection Rating: IP54 Specifications Motor Voltage: 230V Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Max Opening Angle: 90 Degrees Gate Speed: 18 Seconds for 90 Degrees Duty Cycle: Semi-Intensive Protection Rating: IP54 What's in the Box 1x CAME F1000 230V Motor

FAAC 844 R 109838 Gearmotor for Sliding Gates - Replacement Motor

Product Overview The FAAC 844 R 109838 gearmotor is designed as a direct replacement for broken or damaged sliding gate motors, providing robust performance and durability. Key Features Direct replacement for FAAC 844 R 109838 gate motors Suitable for sliding gates with a maximum weight of 1800kg Maximum gate length up to 40000mm Above ground installation Electromechanical motor for reliable operation Mechanically locking motor ensures secure gate closure Power supply voltage of 230v Motor voltage of 230v Gate speed of 10 meters per minute Semi-intensive duty cycle suitable for moderate use IP44 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 844 R 109838 gearmotor is suitable for various sliding gate applications, offering ease of installation and compatibility with existing gate setups. It is ideal for residential and commercial use where reliability and performance are key.

CAME Irreversible Fast70 | 230V Gearmotor | For Swing Gates Up to 2.3m

Product Overview The Irreversible Fast70 230V gearmotor features a control board with functions display, making it ideal for swing gates up to 2.3 meters per leaf. This robust automation solution is perfect for residential or condominium applications, especially on medium and large pillars. The gearmotor ensures reliable performance and offers advanced control features for enhanced gate operation. Key Features Irreversible automation with articulated transmission arm Suitable for swing gates up to 2.3 meters per leaf Ideal for residential and condominium applications Control board with terminal blocks, dip switches, and storage for up to 1000 users Set up for operation in case of power outage Self-diagnosing safety devices Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY Product Description The Fast70 gearmotor integrates advanced CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This feature ensures ease of use and enhanced security for your gate automation system. The Fast70 is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additionally, the Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security. The control board includes terminal blocks, dip switches, and storage for up to 1000 users, providing flexible and comprehensive control options. Specifications Specification FA70230CB Protection rating (IP) 54 Power supply (V - 50/60 Hz) 230 AC Power supply to motor (V) 230 AC Absorption (A) 1.4 Power (W) 160 Maneuvering time at 90° (s) 15 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Advanced Technology The Fast70 gearmotor integrates CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This ensures ease of use and enhanced security for your gate automation system. Applications This gearmotor is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additional Information The Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security.

CAME Irreversible Fast70 | 230V Gearmotor | For Swing Gates Up to 2.3m

Product Overview The Fast70 230V gearmotor is designed for swing gates up to 2.3 meters per leaf, making it ideal for residential or condominium applications on medium and large pillars. This robust gearmotor ensures reliable performance and advanced control features. Key Features Irreversible gearmotor with articulated drive arm Suitable for swing gates up to 2.3 meters per leaf Ideal for residential and condominium applications Control board with terminal blocks, dip switches, and storage for up to 1000 users Set up for operation in case of power outage Self-diagnosing safety devices Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY Product Description The Fast70 gearmotor integrates advanced CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This feature ensures ease of use and enhanced security for your gate automation system. The Fast70 is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additionally, the Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security. The control board includes terminal blocks, dip switches, and storage for up to 1000 users, providing flexible and comprehensive control options. Specifications Specification Details Protection rating (IP) 54 Power supply (V - 50/60 Hz) 230 AC Power supply to motor (V) 230 AC Absorption (A) 1.4 Power (W) 160 Maneuvering time at 90° (s) 15 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Advanced Technology The Fast70 gearmotor integrates CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This ensures ease of use and enhanced security for your gate automation system. Applications This gearmotor is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additional Information The Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security.

V2 Gate Automation V2 BLITZ 230Vac articulated arm motor 22E 001 for swing gates up to 3m

BLITZ 230Vac Swing gate motor for leaves up to 3m - With opening and closing electrical limit switch. - Protective hatch with customized key. Internal release lever. - Built-in cabled limit switches: for fewer connections and speed of installation. - Single version for both right and left leaves. - Anti-shear pivoted arm.

V2 Gate Automation V2 HYPERFOR-I 230V Motor 23F003 | Sliding Gate Motor | Up to 4000Kg with Inverter

Product Overview The V2 HYPERFOR-I 230V Motor 23F003 is designed for sliding gates weighing up to 4000kg. This three-phase motor with inverter features a robust design with a galvanized painted sheet steel cabinet and is suitable for intensive operations. Key Features Designed for sliding gates weighing up to 4000kg Built-in digital control unit Galvanized painted sheet steel cabinet for durability Obstacle detection for enhanced safety Self-learning of opening and closing times Synchronized operation of two motors using the SYNCRO module Possibility to adjust the gearmotor torque with industrial electromechanical limit switch and M6 pinion Three-phase motor with inverter for precise control (230V version with inverter) Programmable acceleration and deceleration (230V version with inverter) Product Description The V2 HYPERFOR-I 230V Motor 23F003 is ideal for sliding gates up to 4000kg, providing reliable and efficient operation. It includes a built-in digital control unit for precise management of gate movements, ensuring smooth and safe operation. Constructed with a galvanized painted sheet steel cabinet, this motor is designed for intensive use, even with large gates. It features obstacle detection technology to enhance safety during operation and offers self-learning capabilities for optimizing opening and closing times. The motor supports synchronized operation of two motors using the SYNCRO module, enabling coordinated movement of double gates. It also allows for torque adjustment with industrial electromechanical limit switches and M6 pinion, ensuring flexibility in gate automation. Equipped with a three-phase motor and inverter (230V version with inverter), the HYPERFOR-I motor offers programmable acceleration and deceleration, allowing users to customize the gate's operating speed according to specific requirements. What's in the Box 1 x V2 HYPERFOR-I 230V Motor 23F003

BFT IGEA 230V Electromechanical Articulated Arm Motor for Swing Gates

Product Overview The BFT IGEA 230V Electromechanical Articulated Arm Motor is designed for residential swing gates, accommodating gate leaves up to 2.5 meters and weighing up to 250 kg. This motor is perfect for installation on large-size pillars thanks to its articulated levers, allowing an opening angle of up to 125°. Key Features Articulated Arm Design: Ideal for gates with large-size pillars, offering flexible installation options. Wide Opening Angle: The articulated levers allow for an opening angle of up to 125°. Intensive Use: Designed for frequent use, making it perfect for residential applications. Robust and Reliable: Supports gate leaves up to 2.5 meters in length and 250 kg in weight. Efficient Operation: Equipped with an electric clutch for impact reaction and a control panel (RIGEL 6) for smooth operation. Technical Specifications FeatureDetails Power Supply 230V Gate Leaf Length 2m / 2.5m Maximum Leaf Weight 250kg / 200kg Control Panel RIGEL 6 Cycle Time 15 seconds Impact Reaction Electric Clutch Frequency of Use Intensive Opening Angle Up to 125° Installation Benefits The BFT IGEA motor is designed for ease of installation, especially on large pillars, making it a versatile choice for various residential settings. Its articulated arm and robust construction ensure reliable and efficient operation, even with frequent use. Gallery

NICE HY7005 | Irreversible 230V Motor for Swing Gates with Leaves up to 3m

Product Overview The HY7005 is an irreversible motor designed for automating swing gates with leaves up to 3 meters, including those with large pillars. This robust motor operates on 230V and features a die-cast aluminium housing with a key-operated unlock system and an anti-shearing arm, making it a reliable and efficient choice for gate automation. Key Features Irreversible 230V motor Die-cast aluminium housing with key-operated unlock system Sturdy, anti-shearing arm, galvanised and painted Designed to accommodate external release Suitable for swing gates with leaves up to 3 meters Mechanically locking motor IP54 protection rating Gate speed: 18 seconds for 90 degrees Semi-intensive duty cycle Product Description HY7005 Irreversible 230V Motor for Swing Gates with Leaves up to 3m The Hyppo HY7005 motor is specifically designed for the automation of swing gates with leaves up to 3 meters in length. This motor is also suitable for gates with large pillars, providing versatile and robust performance. The HY7005 is an irreversible motor operating on 230V, featuring a die-cast aluminium housing and a key-operated unlock system with a protected key, designed to accommodate an external release. The sturdy, anti-shearing arm is galvanised and painted, and strengthened in areas subjected to greater mechanical stress, ensuring long-term reliability and performance. Advanced Features and Specifications Gate Type: Swing gate Max Length per Gate: 3000mm Above or Underground: Above ground Motor Voltage: 230V Max Weight per Gate: 330kg Max Opening Angle: 110 degrees Locking Method: Mechanically locking motor Type: Wired or wireless swing gate Motor Type: Electromechanical Protection Rating: IP54 Gate Speed: 18 seconds for 90 degrees Duty Cycle: Semi-intensive Mains Power Supply: 230V Category: Swing Gate Motor

NICE HYPPO HY7100 | 230 Vac Motor with Telescopic Arm and Limit Switches

Product Overview The HYPPO HY7100 is a 230 Vac motor with a sturdy telescopic arm, designed for 2-leaf folding doors. It features a galvanised and painted finish, along with a limit switch on both opening and closing. This motor is pre-wired with an incorporated double limit-switch, ensuring fewer connections and quicker installation. Key Features Irreversible 230 Vac motor Sturdy telescopic arm Galvanised and painted finish Limit switch on opening and closing Pre-wired with incorporated double limit-switch Fewer connections for quicker installation Solid metal mechanics BlueBus technology IP Rating: 20 Max Speed: 2 Motor Voltage: 24Vdc Solar power option available Product Description Irreversible HY7100 230 Vac with Sturdy Telescopic Arm The HYPPO HY7100 motor is specifically designed for 2-leaf folding doors, offering advanced technology and robust performance. Its sturdy telescopic arm and galvanised, painted finish ensure durability and a long service life. The motor is pre-wired with an incorporated double limit-switch for both opening and closing, which reduces the number of connections and speeds up the installation process. Reliable and Efficient Operation This motor features solid metal mechanics and a sturdy telescopic arm, providing reliable and efficient operation for folding doors. The limit switches ensure precise control during both opening and closing. Advanced Technology Equipped with BlueBus technology, the HY7100 motor ensures seamless communication with other system components, enhancing overall functionality. The motor also offers a solar power option, making it an energy-efficient choice for various applications. Durability and Protection The motor has an IP20 rating, providing adequate protection for most indoor applications. Its solid metal construction and galvanised, painted finish ensure it can withstand harsh conditions and heavy use.

ROGER TECHNOLOGY R23 Gate Motor for Swing Gates | Up to 3.5m | Without Articulated Arms | 230V

Product Overview The R23 Gate Motor is a versatile and robust electromechanical motor designed for swing gates with leaves up to 3.5m. This 230V AC motor is irreversible and includes a mechanical limit switch for added reliability. Without articulated arms, the R23 motor ensures smooth and efficient gate operation for both residential and commercial applications. Key Features Suitable for swing gates with leaves up to 3.5m 230V AC power supply Irreversible motor Includes mechanical limit switch Product Description The R23 Gate Motor is an electromechanical articulated motor designed for swing gates. With its powerful 230V AC motor, the R23 can handle gate leaves up to 3.5m in length. The motor is designed for long-lasting performance and includes a mechanical limit switch for reliable operation. It is available in different configurations to suit various installation needs. Specifications SpecificationDetails Power line supply 230V AC - 50Hz Motor power supply 230V AC Power rating 200W Frequency of use 50% Torque 400 Nm Operating temperature -20 to +55°C Protection level IP44 Reductor Type Irreversible Manoeuvre speed 1.5 RPM Opening time 14 s Motor thermal protection 150°C Incorporated condenser 10 µF Limit switch Microswitch in opening and closing Encoder - Maximum dimension product (L x W x H in mm) 355 x 190 x 160 Product weight packed (Kg) 13.5 Number of items per pallet/box 48 Applications The R23 Gate Motor is ideal for automating swing gates in both residential and commercial settings. Its robust design and reliable performance make it suitable for a variety of environments, ensuring secure and efficient gate operation.

FAAC Gearmotor for sliding gates with built in control board 740 E Z16

2 Year guarantee

FAAC 741 E Z16 | Gearmotor for Sliding Gates | Up to 800Kg with Built-in Control Board

Product Overview The FAAC 741 E Z16 is a high-performance gearmotor designed for sliding gates up to 800Kg. This 230V gearmotor comes with a built-in control board, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 800Kg. 230V operational voltage. Built-in control board for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 741 E Z16 1097815 models. Includes full technical support for installation and setup. Product Description FAAC 741 E Z16 | Gearmotor for Sliding Gates | Up to 800Kg with Built-in Control Board The FAAC 741 E Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 800Kg. Designed for 230V power supply, this gearmotor features an integrated control board, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 741 E Z16 1097815 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 800Kg Power Supply 230V Control Board Built-in Product Code 741 E Z16 1097815 For those looking to replace their existing FAAC 741 E Z16 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 746 ER Z16 | Gearmotor for Sliding Gates | Up to 600Kg with Built-in Control Panel

Product Overview The FAAC 746 ER Z16 is a high-performance gearmotor designed for sliding gates up to 600Kg. This 230V gearmotor comes with a built-in control panel, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 600Kg. 230V operational voltage. Built-in control panel for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 746 ER Z16 109776 models. Includes full technical support for installation and setup. Product Description FAAC 746 ER Z16 | Gearmotor for Sliding Gates | Up to 600Kg with Built-in Control Panel The FAAC 746 ER Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 600Kg. Designed for 230V power supply, this gearmotor features an integrated control panel, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 746 ER Z16 109776 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 600Kg Power Supply 230V Control Panel Built-in Product Code 746 ER Z16 109776 For those looking to replace their existing FAAC 746 ER Z16 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 746 ER Z20 | Gearmotor for Sliding Gates | Up to 400Kg with Built-in Control Panel

Product Overview The FAAC 746 ER Z20 is a high-performance gearmotor designed for sliding gates up to 400Kg. This 230V gearmotor comes with a built-in control panel, making it an ideal replacement for broken or damaged gate motors. All our gate motors are genuine, brand new, and sourced directly from the manufacturer, ensuring you receive reliable and top-quality products. Key Features Suitable for sliding gates up to 400Kg. 230V operational voltage. Built-in control panel for seamless integration and control. Genuine FAAC product with manufacturer support. Direct replacement for FAAC 746 ER Z20 109773 models. Includes full technical support for installation and setup. Product Description FAAC 746 ER Z20 | Gearmotor for Sliding Gates | Up to 400Kg with Built-in Control Panel The FAAC 746 ER Z20 gearmotor is engineered to provide robust and reliable automation for sliding gates up to 400Kg. Designed for 230V power supply, this gearmotor features an integrated control panel, simplifying the installation process and enhancing overall functionality. It serves as an excellent direct replacement for existing FAAC 746 ER Z20 109773 models, ensuring your gate system is up and running efficiently. Our FAAC gate motors are all brand new and genuine, sourced directly from the manufacturer to guarantee quality and reliability. Additionally, we offer full technical support and advice to assist you in the installation and maintenance of your gate motor, ensuring a smooth and trouble-free operation. Technical Specifications SpecificationDetails Gate Weight Capacity Up to 400Kg Power Supply 230V Control Panel Built-in Product Code 746 ER Z20 109773 For those looking to replace their existing FAAC 746 ER Z20 gearmotor, this model is a perfect fit, providing seamless compatibility and superior performance. Contact our support team for any technical assistance you may require during installation.

FAAC 844 1ER Z16 | Gearmotor with Built-in Control Board | Sliding Gates

Product Overview The FAAC 844 1ER Z16 is a robust gearmotor designed for sliding gates in commercial and industrial applications. Featuring a built-in control board, this gearmotor ensures seamless operation and enhanced safety with anti-crushing protection. Ideal for rack applications, the 844 1ER Z16 is a reliable choice for heavy-duty gate automation. Key Features Suitable for commercial and industrial sliding gate applications. Includes built-in control board for integrated operation. Anti-crushing safety feature for enhanced protection. Non-reversible motor ensures secure operation. Manual release device for operation during power failures. Twin-disk clutch in oil-bath for smooth performance. Inductive or magnetic limit switch options. 2-year guarantee for peace of mind. Product Description FAAC 844 1ER Z16 | Gearmotor with Built-in Control Board | Sliding Gates The FAAC 844 1ER Z16 gearmotor is engineered to provide robust and reliable automation for sliding gates in demanding commercial and industrial environments. This gearmotor is specifically designed for rack applications, ensuring smooth and efficient operation for heavy-duty gates. Equipped with a built-in control board, the 844 1ER Z16 simplifies installation and enhances the overall functionality of the gate system. The non-reversible motor offers secure operation, while the anti-crushing safety feature provides essential protection against accidents. In the event of a power failure, the key-operated release device allows for manual opening and closing of the gate, ensuring continued access and security. The twin-disk clutch in an oil-bath delivers reliable performance, and the gearmotor offers the choice of inductive or magnetic limit switches for precise control. Technical Specifications SpecificationDetails Application Commercial and Industrial Sliding Gates Motor Type Non-reversible Control Board Built-in Safety Features Anti-crushing Manual Release Key-operated Clutch Twin-disk in oil-bath Limit Switch Inductive or Magnetic Guarantee 2 Years The FAAC 844 1ER Z16 gearmotor is a robust and reliable solution for heavy-duty sliding gate automation in commercial and industrial settings, offering advanced features and secure operation.

FAAC 844 R Z12 REVERSIBLE 109897 | Gearmotor for Sliding Gates Up to 1000kg

Product Overview The FAAC 844 R Z12 REVERSIBLE 109897 is a robust and reliable gearmotor designed for sliding gates with a maximum weight of 1000kg per gate. This electromechanical motor is ideal for replacing broken or damaged gate motors, ensuring smooth and efficient operation for residential and commercial properties. With its reversible functionality, this motor provides flexibility and enhanced performance. Key Features Reversible gearmotor for sliding gates Suitable for gates up to 1000kg Electromechanical motor for reliable performance Requires solenoid lock for secure operation Quick and easy replacement for broken or damaged motors Power input: 550W Max gate length: 40000mm Gate speed: 12 m/min Protection rating: IP 44 Duty cycle: Semi-intensive Technical Specifications Power Input: 550W Gate Type: Sliding Gate Max Weight Per Gate: 1000kg Max Length Per Gate: 40000mm Above Or Underground: Above Ground Motor: Electromechanical Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 230V Gate Speed: 12 M/Min Duty Cycle: Semi-Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Product Description The FAAC 844 R Z12 REVERSIBLE 109897 gearmotor is designed to provide reliable and efficient automation for sliding gates up to 1000kg in weight. This motor is perfect for replacing broken or damaged gate motors, ensuring continuous and smooth operation for residential and commercial sliding gates. With its reversible functionality, the FAAC 844 R Z12 offers enhanced flexibility and performance. This electromechanical motor operates with a power input of 550W and a gate speed of 12 meters per minute, making it suitable for semi-intensive use. The motor requires a solenoid lock for secure operation and is designed for above-ground installation. Its integrated features and robust construction ensure long-lasting durability and reliability. The FAAC 844 R Z12 REVERSIBLE 109897 is easy to install and replace, making it an ideal choice for users looking to replace their broken or damaged gate motors. With its comprehensive technical specifications, this motor guarantees efficient and effective gate automation. Note: This product is the motor only and does not include the control panel. Order before 2pm for next working day delivery, subject to stock availability.

CAME FE40230 | 230V Electro-Mechanical Automation for Swing Gates | Up to 4m

Product Overview The CAME FE40230 is a high-performance 230V electro-mechanical motor designed for automating swing gates with gate leaves up to 4 meters. This self-locking motor, equipped with an encoder and articulated transmission arm, provides reliable and efficient operation. It is an ideal direct replacement for broken or damaged CAME FE40230 gate motors, ensuring your gate automation system is back up and running smoothly. Key Features Suitable for swing gates with leaves up to 4 meters. 230V electro-mechanical operation for robust performance. Self-locking mechanism with encoder for added security. Articulated transmission arm for smooth operation. Direct replacement for CAME FE40230 models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. Product Description CAME FE40230 | 230V Electro-Mechanical Automation for Swing Gates | Up to 4m The CAME FE40230 is engineered to provide reliable and efficient automation for swing gates up to 4 meters in length. This 230V self-locking electro-mechanical operator with an encoder and articulated transmission arm ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the FE40230 offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME FE40230 motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 230V Gate Compatibility Swing Gates Up to 4m Operation Electro-Mechanical Self-Locking Yes, with Encoder Transmission Arm Articulated Replacement For CAME FE40230 Condition Brand New Manufacturer CAME For those looking to replace their existing CAME FE40230 gate motor, this 230V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME FE40230V | Swing Gate Motor | For Gates Up to 4m

Product Overview The CAME FE40230V is a rapid and reliable swing gate motor designed for single residential gates up to 4m in length. This 230V motor offers fast operation with an articulated transmission arm and self-locking mechanism, ensuring security and efficiency. The motor includes an encoder for precise control and smooth operation. The CAME FE40230V is an ideal replacement for broken or damaged gate motors, providing robust performance and easy installation. Key Features Suitable for swing gates up to 4m in length Rapid motor operation for quick gate movement Self-locking mechanism for enhanced security Operates at 230V for reliable performance Includes an encoder for precise control Articulated transmission arm for smooth operation Product Description The CAME FE40230V is engineered to provide a fast and efficient automation solution for swing gates in residential settings. Capable of handling gates up to 4m in length, this motor ensures robust and reliable performance with its electromechanical design. The self-locking mechanism offers an added layer of security by keeping the gate securely closed when not in operation. With a motor voltage of 230V, the CAME FE40230V delivers consistent power and rapid operation. The included encoder ensures precise control and smooth movement of the gate. The articulated transmission arm further enhances the motor's performance by allowing flexible and efficient gate operation. This motor is perfect for homeowners seeking a quick and reliable replacement for their broken or damaged gate motors. The CAME FE40230V is brand new, genuine, and direct from the manufacturer in the UK, ensuring quality and reliability. With full advice and technical support available, installation and setup are straightforward and hassle-free. What Comes in the Box 1x CAME FE40230V 230V Rapid Motor Specifications Gate Type: Swing Gate Max Length Per Gate: 4000mm Motor Type: Electromechanical Locking Method: Self-Locking Motor Voltage: 230V Includes: Encoder Transmission Arm: Articulated

CAME FROG-PM4 | Underground Swing Gate Motor | For Gates Up to 5.5m

Product Overview The CAME FROG-PM4 is a robust underground swing gate motor designed for single residential gates up to 5.5m in length and 1100kg in weight. This 230V motor offers reliable performance with a mechanical locking method and a semi-intensive duty cycle, making it suitable for residential applications. The motor provides a maximum opening angle of 95 degrees and operates at a gate speed of 30 seconds for 90 degrees. With an IP67 protection rating, it is built to withstand various environmental conditions, ensuring durability and longevity. The motor also includes an encoder for precise operation and control. Key Features Suitable for single swing gates up to 5.5m in length or 1100kg in weight Underground installation for a discreet appearance Mechanical locking motor for enhanced security Operates at 230V for reliable performance Gate speed: 30 seconds for 90 degrees Maximum opening angle: 95 degrees Semi-intensive duty cycle for residential use IP67 protection rating for resistance to environmental conditions Includes an encoder for precise control Product Description The CAME FROG-PM4 is an advanced underground swing gate motor tailored for residential gates requiring a discreet and efficient automation solution. Engineered to handle gates up to 5.5m in length and weighing up to 1100kg, this motor ensures robust and reliable performance with its electromechanical design. The motor is mechanically locking, providing an added layer of security to keep the gate securely closed when not in operation. With a motor voltage of 230V, the CAME FROG-PM4 delivers consistent power and efficiency. It features a gate speed of 30 seconds for a 90-degree opening, making it both quick and effective in daily use. The motor supports a maximum opening angle of 95 degrees, accommodating various gate configurations. Designed for semi-intensive duty cycles, it is ideal for residential settings with moderate traffic. The motor's IP67 protection rating ensures it is well-protected against dust and water ingress, making it suitable for outdoor installations in different weather conditions. This underground motor, equipped with an encoder, is perfect for homeowners seeking a reliable and unobtrusive automation solution for their swing gates. What Comes in the Box 1x CAME FROG-PM4 230V Motor Link Arm Encoder Specifications Gate Type: Swing Gate Max Length Per Gate: 5500mm Max Weight Per Gate: 1100kg Installation Type: Underground Max Opening Angle: 95 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 230V Gate Speed: 30 Seconds for 90 Degrees Duty Cycle: Semi-Intensive Protection Rating: IP67 Category: Swing Gate Motor

BENINCA 230v PREMIER articulated arm operator PR.45E

2 Year guarantee