FADINI F/624L JUNIOR 624 24Vdc Electromechanical Geared Motor Operator for Sliding Gates up to 400 kg

Product Overview The FADINI JUNIOR 624 24Vdc electromechanical geared motor operator is designed for sliding gates up to 400 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 24Vdc geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Pre-set for battery backup in case of power failure Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 624 offers a powerful and quiet solution for automating sliding gates. The 24Vdc geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 624, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates and pre-set for battery backup to ensure continuous operation during power failures. The JUNIOR 624 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Motor voltage (V) 24 Max. absorbed power (W) 220 Max. absorbed current (A) 6.3 Max. torque (N) 400 Motor revolutions (rpm) 3,000 Speed (m/min) 12 Gear ratio 1:61 Working temperature (°C) -25 ÷ +50 Grade of protection IP 54 Oil type F/706L Weight (kg) 11 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).