ROGER TECHNOLOGY MONOS4 Brushless Motor | 24V or 230V | Up to 4m

Product Overview The MONOS4 Brushless Motor is an electromechanical operator designed for swing gates with leaves up to 4 meters in length. Available in two variants, 24V for super intensive use and 230V AC, this motor features a telescopic arm and an irreversible design, ensuring robust and reliable performance. The 24V version includes a digital native encoder onboard for precise control. Key Features Suitable for swing gates with leaves up to 4m Available in 24V or 230V variants Irreversible design for secure operation Telescopic arm for flexible installation Super intensive use capability (24V) Specifications Property24V230V Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 24V 230V AC Power rating 200W 200W Frequency of use Intensive use 30% Thrust 2200N 2400N Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP44 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 2.10 cm/s 1.66 cm/s Opening time 19-35 s 24 s Stroke 400 mm 400 mm Limit switch - - Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR - Operating cycles per day 700 (opening/closing - 24 hours no stop) - Maximum dimension product (L x W x H) 1223 x 178 x 111 mm 1223 x 178 x 111 mm Note: Actual product may differ from photo.

ROGER TECHNOLOGY SL/180/R - Swing Gate Motor | Up to 1.8m | Without Arms | Reversible | 36V

Product Overview The SL/180/R Swing Gate Motor is designed for intensive use, supporting swing gates with leaves up to 1.8m. This low voltage electromechanical gear motor operates on 36V and features brushless IPU technology with an integrated digital encoder. The motor is reversible, locking in the open and closed positions while the power is on, but unlocking as the power goes off, providing an emergency free exit during power cuts. The motor comes without arms, which can be purchased separately (see Accessories for arms). Key Features 36V power supply Reversible motor Suitable for swing gates with leaves up to 1.8m Brushless IPU technology Integrated digital magnetic encoder (4096 PPR) Intensive use Specifications Power line supply 230V AC 50Hz Motor power supply 36V Power rating 200W Frequency of use Intensive use Torque 150 N m Operating temperature -20 to +55°C Protection level IP44 Reductor Type Reversible Manoeuvre speed 0.6 - 6.6 Rpm Opening time 6-30 s Limit switch Mechanical stop on opening and closing only with LT341 accessory Recommended digital controllers F70/IPU36/BOX, F70/IPU36/BOX/SL Encoder Digital magnetic encoder SENSORED, 4096 PPR Batteries recovery 3 external batteries 12V DC 4.5 Amp/h (on external box) - optional Operating cycles per day 400000 (opening/closing - 24 hours no stop) Maximum dimension product (L x W x H) 492 x 102 x 144.5 mm Accessories KT250 KT218 LT340 - Arms short for articulated SLED series LT341 - Slide arm lever for articulated SLED series

ROGER TECHNOLOGY SMARTY Brushless Motor | 36V | Up to 7m Gate Length

Product Overview The SMARTY Brushless Motor is a high-performance 36V electro-mechanical gear motor designed for extremely heavy-duty applications. Ideal for swing gates with leaf lengths up to 7 meters, this motor offers both reversible and irreversible options to suit various needs. The SMARTY motor series includes high-speed variants and is equipped with a mechanical stopper for precise opening and closing. Key Features 36V brushless motor for heavy-duty use Available in reversible and irreversible options High-speed variant available (SMARTY4/HS) Suitable for swing gates with leaf lengths up to 7 meters Mechanical stopper for precise opening and closing Intensive use with up to 1000 operating cycles per day Operating temperature range: -20°C to +55°C Protection level: IP44 Product Variants SMARTY4/HS: Irreversible high-speed motor for leaf up to 4m length SMARTY5: Irreversible motor for leaf up to 5m length SMARTY5R: Reversible motor for leaf up to 5m length SMARTY7: Irreversible motor for leaf up to 7m length SMARTY7R: Reversible motor for leaf up to 7m length Specifications SpecificationSMARTY4/HSSMARTY5SMARTY5RSMARTY7SMARTY7R Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 200 Frequency of use Intensive use Thrust (N) 600 - 4500 600 - 7000 600 - 6500 600 - 7000 600 - 6500 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Irreversible Reversible Irreversible Reversible Manoeuvre speed (cm/s) 2 - 1 1.6 1.8 1.6 1.6 Opening time (s) 15-25 25-40 20-40 35-50 35-50 Stroke (mm) 370 370 370 520 520 Limit switch Mechanical stopper in opening and closing Recommended digital controllers 230V: EDGE1/BOX - 115V: EDGE1/BOX/115 Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR + EMA Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours non-stop) 1000 Maximum dimension product (L x W x H in mm) 1162 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 1312 x 116 x 165 Reversible Motors Roger Technology reversible motors lock in the open and closed position while the power is on but unlock as the power goes off. This feature is useful if you need an emergency free exit in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. For Further Inquiries For further inquiries or additional information regarding this product, please contact us through our inquiry form.

ROGER TECHNOLOGY BM30 Brushless Sliding Gate Motor | 24v | Up to 400kg | High Speed

Product Overview The BM30 Brushless Sliding Gate Motor is designed for super intensive use, ideal for sliding gates up to 400kg. This 24v high-speed electromechanical motor is irreversible and comes with a built-in digital controller from the B70 series. It is perfect for both residential and commercial applications, offering robust performance and reliability. Motor Options BM30/303/HS - 24v | Up to 400kg | High Speed | Mechanical limit switch BM30/304/HS - 24v | Up to 400kg | High Speed | Magnetic limit switch Key Features High speed operation Supports gates up to 400kg Super intensive use Available with mechanical or magnetic limit switches Low voltage 24v motor Specifications SpecificationDetails Max Gate Weight 400 kg Power Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating 125W Thrust 50 - 350N Protection Level IP43 Limit Switch Mechanical or magnetic (depending on chosen option) Onboard Control Unit B70/1DC Manoeuvre Speed 26 m/min (0.44 m/s) Product Dimensions (L x W x H) 250 x 165 x 290 mm Product Weight 10.4 kg Items Per Pallet 44 Accessories Standard Accessories KT223: Fixing plate with stay bolts and screws for M30 series. MC773: Kit mechanical limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP. Other Accessories GA550: Galvanised steel rack 22x22x1000 module 4. GA551: Galvanised steel rack 30x12x1000 module 4 with spacers and screws. GA554: Pocket of 6 spacers (2.5 cm) and screws. KT220: Raised fixing plate for M30 series (+3 cm). R99/C/001: Signboard "Automatic Opening". GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000. R99/C/001AL: Signboard "Automatic Opening" Aluminium version. B71/PBX24/BOX: Hybrid inverter, “Network Assisted” version, for powering the automation with a mains voltage of 230V AC. B71/PBX24/BOX/115: Hybrid inverter, “Network Assisted” version, for powering the automation with a mains voltage of 115V AC. B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for brushless digital controllers. Additional Information For further inquiries or additional information regarding the BM30 Brushless Sliding Gate Motor, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BH30 Brushless Sliding Gate Motor | 24V | Up to 1000kg | High Speed & Reversible Options

Product Overview The BH30 Brushless Sliding Gate Motor is an electromechanical 24V BRUSHLESS motor designed for low voltage and super intensive use. This motor is equipped with a native encoder onboard and a built-in digital controller from the B70 series. It is ideal for sliding gates weighing up to 1000kg. The BH30 motor is available in high-speed and reversible editions, providing robust performance and reliability for both residential and commercial applications. Key Features 24V Brushless motor Super intensive use Native encoder onboard Mechanical or magnetic limit switch options Irreversible or reversible models High-speed motors available Supports sliding gates up to 1000kg Operator Options BH30/603/HS - Up to 600kg - High Speed - Mechanical limit switch BH30/604/HS - Up to 600kg - High Speed - Magnetic limit switch BH30/803 - Up to 1000kg - Mechanical limit switch BH30/804 - Up to 1000kg - Magnetic limit switch BH30/804/R - Up to 800kg - Reversible - Magnetic limit switch Specifications SpecificationBH30/603/HSBH30/604/HSBH30/803BH30/804BH30/804/R Max Gate Weight (kg) 600 600 1000 1000 800 Power Line Supply 230V AC - 50Hz Motor Power Supply 24V Power Rating (W) 130 130 200 200 140 Frequency of Use Intensive use Thrust (N) 50 - 500 50 - 500 50 - 1000 50 - 1000 60 - 600 Operating Temperature (°C) -20 to +55 Protection Level IP43 IP44 IP43 IP43 IP43 Reductor Type Irreversible Irreversible Irreversible Irreversible Reversible Manoeuvre Speed (m/min) 26 (0.4) 26 (0.4) 12 (0.20) 12 (0.20) 18 (0.30) Limit Switch Mechanical Magnetic Mechanical Magnetic Magnetic Onboard Control Unit B70/1DC Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries Recovery Optional 2 internal battery 12V 1.2AH - Optional 2 external battery 12V 4.5AH Type Exit Gear Z15/mod 4 Operating Cycles per Day 800 800 1300 1300 1000 Maximum Dimension Product (L x W x H in mm) 315 x 165.8 x 329 Product Description The BH30 Brushless Sliding Gate Motor is a versatile and reliable solution for operating sliding gates up to 1000kg. With a 24V low voltage design and super intensive use capability, it is perfect for both residential and commercial settings. The motor features a built-in digital controller from the B70 series and a native encoder for precise control. Available in high-speed and reversible models, the BH30 motor meets various application requirements. The reversible motors lock in the open and closed positions when powered, providing enhanced security and an emergency exit option during power outages. Standard Accessories KT214: Fixing plate with stay bolts and screws for H30 series MC773: Kit mechanical limit switch for control units H70/103AC, H70/104AC, B70/1DC, B70/1DCHP Other Accessories GA550: Galvanised steel rack 22x22x1000 module 4 GA551: Galvanised steel rack 30x12x1000 module 4 with spacers and screws GA554: Pocket of 6 spacers (2.5 cm) and screws KT221: Raised fixing plate for H30 series (+3.5 cm) R99/C/001: Signboard "Automatic Opening" KT214/SC: Adapter plate with stay bolts and screws for H30 series B71/BC: Batteries charger for Brushless digital controller B70/1DC BT12V12: Battery 12V 1.2 Ah (1 pc) BT12V45: Battery 12V 4.5 Ah (1 pc) HT418: External box without batteries, for battery BT12V45 (12V DC 4.5 Ah) KT214/SF: Adapter plate with stay bolts and screws for H30 series GA557: Roger Technology nylon rack module 4 with 6 connectors L.1000 KT214/SN: Adapter plate with stay bolts and screws for H30 series LT330: Chain drive kit for H30 - BH30 series LT334: 1/2" X 5/16" 5 meter chain piece for LT330 with joint R99/C/001AL: Aluminium version of the "Automatic Opening" signboard B71/PBX24/BOX: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 230V AC B71/PBX24/BOX/115: Hybrid inverter, “Network Assisted” version, for 24V DC brushless digital controllers with a mains voltage of 115V AC B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for brushless digital controllers HT421: External box without batteries, for battery BT12V45 (4.5 Ah), BT12V70 (7 Ah), and BT12V120 (12 Ah), up to a maximum of 3 batteries Additional Information For more details on the BH30 Brushless Sliding Gate Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BH23 Brushless Motor | Up to 2.8m Swing Gates | 36V

Product Overview The BH23 Brushless Motor is an electromechanical articulated motor designed for swing gates up to 2.8 meters. This 36V low voltage motor is ideal for super intensive use, featuring a native encoder onboard and an irreversible design. It includes mechanical stoppers for both opening and closing, and comes with short arms as standard. The BH23 is available in both high-speed and standard editions, making it suitable for a variety of residential and commercial applications. Key Features 36V Brushless motor Irreversible design High-speed variant available Supports swing gates with leaves up to 2.8m Mechanical stoppers in opening and closing Super intensive use Native encoder onboard Operator Options BH23/252/HS - Up to 2.5m - High Speed BH23/282 - Up to 2.8m Specifications SpecificationBH23/252/HSBH23/282 Power line supply 230V AC - 50Hz 230V AC - 50Hz Motor power supply 36V 36V Power rating 160W 160W Frequency of use Intensive use Intensive use Torque 50 - 200 N m 50 - 280 N m Operating temperature -20°C to +55°C -20°C to +55°C Protection level IP43 IP44 Reductor Type Irreversible Irreversible Manoeuvre speed 1.5 - 4 Rpm 1 - 1.9 Rpm Opening time 10-18 s 12-20 s Limit switch Mechanical stopper in opening and closing Mechanical stopper in opening and closing Recommended digital controllers - - Encoder Digital native encoder SENSORLESS 48 PPR Digital native encoder SENSORLESS 48 PPR Operating cycles per day (opening/closing - 24 hours no stop) 1200 1900 Product Description The BH23 Brushless Motor is a high-performance solution for swing gates, offering robust and reliable operation. The motor's irreversible design and native encoder provide precise control and enhance safety by locking the gate in place when powered. The high-speed variant (BH23/252/HS) is perfect for gates up to 2.5 meters, offering rapid operation, while the standard BH23/282 model supports gates up to 2.8 meters with increased torque for heavier gates. With a power rating of 160W and operating cycles up to 1900 per day, the BH23 Brushless Motor is designed for intensive use, making it suitable for both residential and commercial applications. The motor's mechanical stoppers ensure accurate and safe positioning of the gate in both open and closed positions. Additional Information For more details on the BH23 Brushless Motor or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY BG30 Brushless Sliding Gate Motor | 36v | Up to 2200kg

BG30 Brushless Sliding Gate Motor | 36v | Up to 2200kg Electromechanical BRUSHLESS 36v motor, low voltage, super intensive use, with native encoder onboard, with built-in digital controller B70 series, with magnetic limit switch. Ideal for sliding gates up to: 1000 kg (BG30/1004/HS) - High Speed 1400 kg (BG30/1404/R) - Reversible 1500 kg (BG30/1504/HS) - High Speed 1600 kg (BG30/1604) 1800 kg (BG30/1804/HS) - High Speed 2200 kg (BG30/2204) ** Reversible Motors ** Roger Technology reversible motors lock in the open and closed position while the power is on but unlock as the power goes off. This feature is useful if you need an emergency free exit in the event of a power cut. Other brands' reversible motors are always unlocked and require an electric lock in the open and closed positions. Key Features: Brushless Super intensive use With magnetic limit switch Available in high speed edition (depending on the chosen option) Available in reversible edition (depending on the chosen option) Specifications: SpecificationBG30/1004/HSBG30/1404/RBG30/1504/HSBG30/1604BG30/1804/HSBG30/2204 Max gate weight (kg) 1000 1400 1500 1600 1800 2200 Power line supply 230V AC - 50Hz Motor power supply 36V Power rating (W) 590 540 650 390 650 470 Frequency of use Intensive use Thrust (N) 50 - 800 50 - 600 50 - 1000 50 - 1200 50 - 1250 50 - 1700 Operating temperature (°C) -20 to +55 Protection level IP44 Reductor Type Irreversible Manoeuvre speed (m/min) 20 (0.33) 17 (0.28) 25 (0.42) 12 (0.20) 18 (0.30) 12 (0.16) Limit switch Magnetic Onboard control unit B70/1DCHP Encoder Digital native encoder + magnetic digital SENSORED, 4096 PPR Batteries recovery Optional 2 external battery 12V 4,5AH Type exit gear Z17/mod 4 Z17/mod 4 Z20/mod 4 Z17/mod 4 Z17/mod 4 Z17/mod 4 Operating cycles per day (opening/closing - 24 hours no stop) 800 800 800 1000 800 1000 Maximum dimension product (L x W x H in mm) 350 x 220 x 380 Accessories: Standard Accessories: KT215: Fixing plate for G30 series. MC775: Magnetic limit switch kit for control units H70/103AC, H70/104AC, B70/1DC, B70. Other Accessories:   GA550: Galvanised steel rack, module 4. GA551: Galvanised steel rack with spacers and screws, module 4. GA554: Spacer and screw packet. KT222: Raised fixing plate for G30 series. R99/C/001: Signboard "Automatic Opening". B71/BCHP/EXT: Emergency battery charger kit for EDGE1/BOX, B70/1DCHP. B71/BCHP/BOX: Emergency battery charger kit for EDGE1/BOX, B70/1DCHP, without batteries. LT328: Pinion Z17 for R30, G30, E30 series. LT331: Pinion Z11 for G30, BG30 series. GA557: Nylon rack with connectors, module 4. B74/BCONNECT: Wi-Fi module for remote management. R99/C/001AL: Aluminium "Automatic Opening" signboard. B71/PBX36/BOX/115: Hybrid inverter for 36V DC, 115V AC. B71/PBX36/BOX: Hybrid inverter for 36V DC, 230V AC. B71/PBX/BOX: Hybrid inverter, solar version for brushless digital controllers. GA558: Nylon rack, module 6 with connectors. MC783: Increased magnets for magnetic limit switch. HT421: External battery box for BT12V45, BT12V70, BT12V120.  

ROGER TECHNOLOGY BR21 Brushless Motor - 36V for Swing Gates

Product Overview The BR21 Brushless Motor is an advanced electromechanical underground motor designed for swing gates. Operating at 36V, this motor is ideal for super intensive use and comes with a native encoder onboard, making it a reliable choice for both residential and commercial applications. Available in various configurations to support swing gates with leaves up to 5m. Key Features Super intensive use Supports swing gates with leaf up to 3m / 4.5m / 5m (depending on chosen option) High Speed (HS) option available 36V power supply Irreversible operation 2m or 10m cable options Double bearing edition available Product Description The BR21 Brushless Motor is specifically engineered for high-performance swing gate automation. This motor is available in several versions to accommodate gates with leaves of varying lengths and weights, including high-speed and double-bearing options. The motor features a native encoder onboard for precise control and reliability. Specifications SpecificationBR21/351BR21/361BR21/351/HSBR21/361/HSBR21/362 Power line supply 230V AC - 50Hz Motor power supply 24V - 36V Power rating 200W Frequency of use Intensive Torque 50 - 300 Nm 50 - 300 Nm 50 - 200 Nm 50 - 200 Nm 50 - 300 Nm Operating temperature -20 to +55°C Protection level IP67 Reductor Type Irreversible Manoeuvre speed 1.2 RPM 1.2 RPM 2 RPM 2 RPM 1.2 RPM Opening time 19-29 sec 19-29 sec 10-25 sec 10-25 sec 19-29 sec Limit switch Mechanical stoppers Recommended digital controllers EDGE1/BOX Encoder SENSORLESS 48 PPR Maximum opening 105° (optional 125° - 360°) Power supply cable length 2m 10m 2m 10m 10m Bearing on main shaft Standard Standard Standard Standard Double bearings Operating cycles per day (opening/closing - 24 hours no stop) 1300 Maximum dimension product in mm (L x W x H) 345 x 224 x 144 Other Accessories Foundation Boxes and Lids FU100: Cold galvanized foundation box and lid. FU101: Hot galvanized foundation box and lid. FU102: Hot galvanized foundation box and AISI 304 stainless steel lid. FU103: AISI 304 stainless steel foundation box and lid. Levers and Release Systems LT300: Levers for opening up to 125°. LT301: Levers for opening up to 360°. RL650: Release system with standard lever. RL651: Release system with European cylinder key. RL663: Long release lever for underground. LT301/R: Levers for opening up to 360°, with reinforced chain. RL650/R: Release system with standard lever, reinforced steel version. LT300/90SX: Levers for opening up to 103° - 90° turned - left. LT300/90DX: Levers for opening up to 103° - 90° turned - right. LT327/SC: Pinion gear ¾ Z13 for adaptation in pinion combining ¾ Z16. Signboards R99/C/001: Signboard "Automatic Opening". R99/C/001AL: Signboard "Automatic Opening" Aluminium version. Hybrid Inverters B71/PBX36/BOX/115: Hybrid inverter, “Network Assisted” version, for 36V DC brushless digital controllers with a mains voltage of 115V AC. B71/PBX36/BOX: Same as above but for a mains voltage of 230V AC. B71/PBX/BOX: Hybrid inverter, “Full Solar” version, for powering brushless digital controllers.