GIBIDI GROUND | Underground Electromechanical Operator for Leaf up to 3.5m

Product Overview GROUND - Underground Electromechanical Operator for Leaf up to 3.5 meters is available in both 230Vac and 24Vdc versions. Designed for swinging gates of medium dimensions and weight, it is suitable for both residential and intensive use. Key Features Easy to install with a self-supporting foundation box Silent and fast operation, opening in just 12 seconds Adjustable opening speed in the 24Vdc version Robust construction with steel and bronze-aluminium Adjustable anti-crushing sensitivity for enhanced safety Compliant with EN12453 safety standards Painted reduction gear for protection against atmospheric and environmental agents Product Description EASY TO INSTALL Thanks to the special self-supporting foundation box. Ambidextrous motor and pre-assembled accessories. SILENT AND FAST Only 12 seconds to open the gate! Extremely silent, due to the materials used and tidy finishing of the gears. In the 24Vdc version, it is possible to adjust the opening speed. TECHNOLOGICAL AND SAFE GROUND is built entirely in steel and bronze-aluminium, robust and reliable over time. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity to enhance safety, in compliance with EN12453 standards. The unlocking key has a European profile. A COMPLETE AND RELIABLE RANGE GROUND meets all aesthetic needs of your gate and remains reliable over time, thanks to the completely painted reduction gear, protecting it from atmospheric and environmental agents. Specifications FeatureGROUND610GROUND624 Type of use Residential Heavy Duty Frequency of use 30% Heavy Duty Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 400W 150W Protection degree IP67 IP67 Shaft rotation speed 7°/s 7°/s Max torque 530 Nm 320 Nm Adjustable force Electronic Electronic Adjustable speed Electronic ** Electronic ** Max leaf width 3.5 m * 3.5 m * Max door opening angle 110° 110° Operating temperature -20°C to +60°C -20°C to +60°C Encoder/limit switch LS are optional limit switches O/C LS are optional limit switches O/C Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 11.1 Kg 11.1 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ComponentQuantity GROUND610 or GROUND624 operator 1 Self-supporting foundation box 1 Ambidextrous motor 1 Pre-assembled accessories 1 set European profile unlocking key 1

GIBIDI TOP EVO | Hydraulic Operator for Gates up to 6m (230v) | Heavy Duty Use

Product Overview The TOP EVO hydraulic operator is designed for gates up to 6 meters in length and is suitable for both residential and intensive use. This 230 Vac operator is ideal for heavy, medium, and large size swing gates, offering reliable and efficient performance. Key Features Easy to install - preloaded and factory adjusted, no purge valves or oil top-up required, mounting brackets supplied Silent and fast - hydraulic slowdowns integrated in the last 3cm of rod travel Technological and safe - built with unique vacuum loading process to prevent condensation and emulsion, gasket-free pump-distributor coupling Complete and reliable range - suitable for small residential gates to large commercial or industrial gates, special motors for intensive use Product Description The TOP EVO hydraulic operator is an advanced solution for automating swing gates up to 6 meters in length. Designed for heavy-duty use, it is suitable for both residential and commercial applications. The operator is easy to install, with no need for purge valves or oil top-up, and comes with all necessary mounting brackets. This operator is extremely silent and fast, with hydraulic slowdowns integrated in the last 3cm of rod travel. Its unique vacuum loading process eliminates air residues inside, preventing condensation and emulsion. The pump-distributor coupling is gasket-free, ensuring long-lasting performance. The new die-cast aluminium back-end and torque settings valves enhance reliability and safety. The TOP EVO range includes models suitable for a variety of gate sizes and weights, with special motors designed for intensive use. The operator features adjustable force and speed, electronic speed adjustment (using the BA230 control board), and a high degree of protection (IP65). It is capable of handling gates with a maximum leaf length of 6 meters and operates efficiently in temperatures ranging from -20°C to +60°C. Specifications Technical FeatureTOP291E - ER - ER/STOP391E - ER - ER/STOP441E - ER - ER/S Type of use Heavy Duty Heavy Duty Heavy Duty Frequency of use 55% 55% 55% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz Absorbed power 170W 190W 190W Degree of protection IP65 IP65 IP65 Rod speed 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) 10 mm/s (20 mm/s for ER/S) Max rod stroke 265 mm (290 mm for E) 265 mm (290 mm for E) 425 mm (440 mm for E) Max thrust force 3000 N (2200 N for ER/S) 4500 N (3000 N for ER/S) 4500 N (3000 N for ER/S) Force adjustment Hydraulic Hydraulic Hydraulic Speed adjustment Electronic ** Electronic ** Electronic ** Hydraulic slowdown Yes (No for E) Yes (No for E) Yes (No for E) Max leaf length 3.5 m * 4.5 m * 6.0 m * Operating temperature -20°C to +60°C -20°C to +60°C -20°C to +60°C Rod diameter 16 mm 20 mm 20 mm Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Operator weight 7.7 Kg 8.7 Kg 10 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary. ** By the use of the BA230 control board Applications The TOP EVO hydraulic operator is ideal for a wide range of applications, from small residential gates to large commercial or industrial gates. Its heavy-duty design and advanced features ensure reliable performance even under intensive use conditions.

GIBIDI AGO | Above Ground Operator for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO Above Ground Operator is a versatile electromechanical operator designed for medium to large swinging gates, accommodating gate lengths up to 4 meters. Available in both 230 Vac and 24 Vdc versions, this operator is suitable for residential and heavy-duty applications. The AGO operator is engineered for easy installation, silent and fast operation, and incorporates advanced technological features for enhanced safety and reliability. Key Features Available in 230 Vac and 24 Vdc versions with encoder Suitable for gates up to 4 meters in length Easy installation with adjustable brackets, no welding required Silent operation with steel and bronze-aluminium gears Adjustable speed of movement Complies with EN 12453 safety standards Compact design with die-cast aluminium and stainless steel rod Optional battery kit for operation during power outages Product Description Specifications  AGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width * 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg The AGO Above Ground Operator is designed for straightforward installation, eliminating the need for welding thanks to its adjustable brackets. It features a compact and tapered design that fits aesthetically with any gate style, made entirely of die-cast aluminium with a stainless steel rod for enhanced durability and reliability. This operator ensures a silent and fast operation due to its high-quality steel and bronze-aluminium gears. The 24 Vdc version includes an encoder for automatic programming and integrated anti-crushing sensitivity, meeting the highest safety standards as per EN 12453. Additionally, the optional battery kit ensures gate operation during power outages. Installation and Usage The AGO operator is easy to install with its pre-cabled components and adjustable brackets. It provides a smooth and quiet operation, with adjustable speed to meet specific requirements. Suitable for both residential and heavy-duty use, the AGO operator is a versatile solution for gates up to 4 meters wide. Its robust construction and advanced safety features make it an ideal choice for various gate automation applications. NOTE: In case of blind leaf or wind presence, or if the leaf is over 2.5 meters, the use of an electric lock is necessary.

GIBIDI SERRA320 (15840) | 24V Motor Arm | Heavy Duty Swing Gate Operator

Product Overview The SERRA320 is a 24V DC electromechanical motor arm designed for medium to large swing gates, ideal for heavy-duty applications. Featuring an integrated encoder and adjustable brackets, this operator ensures a straightforward and efficient installation process. The motor arm is engineered for silent and fast operation, utilizing high-quality materials such as steel and bronze-aluminium for the gears, providing adjustable speed and superior performance. Key Features 24V DC electromechanical operator with integrated encoder Pre-cabled operator and encoder for easy installation Includes adjustable brackets and integrated door retainers Gears made from steel and bronze-aluminium for durability Adjustable speed of movement for precise control Extremely silent operation Complies with EN12453 safety standards Embedded anti-crushing sensitivity in control units Product Description Specifications  SERRA320 Type of use Heavy Duty Frequency of use 40% Motor power supply 24 Vdc Absorbed power 100W Protection degree IP44 Rod speed 20 mm/s Max rod stroke 320 mm Max thrust force 1500 N Adjustable force Electronic Adjustable speed Yes ** Max leaf width 3.5 m * Operating temperature -20°C to +60°C Encoder/limit switch Encoder Type of lubrication Grease GBD WH-01 Weight of the unit 8.2 Kg The SERRA320 motor arm is built for reliability and high performance. It is equipped with a latest-generation encoder and a powerful motor suitable for heavy use. The gears and dragging screw are fully protected, ensuring long-term durability. The Gibidi control units include embedded anti-crushing sensitivity, providing enhanced safety as per EN12453 standards. NOTE: In case of blind leaf or wind presence or leaf over 2.5 m, the use of an electric lock is necessary. Adjustable speed is available through the use of the BE24 control board. Installation and Operation Installing the SERRA320 is straightforward thanks to its pre-cabled components and included adjustable brackets. The integrated door retainers and the ambidextrous design of the motor further simplify the setup. Once installed, the operator provides a fast and silent operation, opening gates with high precision and reliability. The adjustable speed and electronic force regulation allow for a tailored performance to meet specific installation requirements. The SERRA320 is suitable for both residential and commercial applications, offering a robust solution for gates with a maximum width of 3.5 meters. Its high-quality construction and advanced technological features make it an ideal choice for demanding environments.

GIBIDI FLOOR | Hydraulic Underground Operator | 230Vac & 24Vdc, Heavy Duty, 150° & 180° Opening

Product Overview The FLOOR Hydraulic Underground Operator is a robust and reliable solution for medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this operator is suitable for residential and heavy use. The FLOOR operator is designed for easy installation, silent and fast operation, and provides advanced technological safety features. Its high-quality materials and in-depth quality testing ensure a long-lasting and efficient performance. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The FLOOR Hydraulic Underground Operator is engineered for easy installation, thanks to its special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates up to 2,3m

FADINI HINDI 880 SPRINT Oil-hydraulic operator for swing gates OIL-HYDRAULIC Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by special key. ROBUST Structure entirely made of aluminium. Simple to install and adjust. It comes in a kit format including the accessories. VERSATILE Several options are available such as reversible non locking, locking by hydraulic device in closed gate position or double locking. TECHNICAL DATA Rod stroke (mm) 235 Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Power yield (W) 180 Max. absorbed current (A) 1.2 Pump flow rate (l/min) 1,4 (P5) Rod diameter (mm) 16 Linear speed opening (mm/s) ~ 16 Linear speed closing (mm/s) ~ 16 Opening force (N) 0 ÷ 5.100 Closing force (N) 0 ÷ 6.200 Working temperature (°C) -25°C / +80°C Oil type 708L Grade of protection IP 67 Frequency of use intensive Weight (kg) 9.5   PRODUCT GUIDE CODE VERSION LH/RH POWER (kW / HP) HYDRAULIC LOCKING SINGLE GATE MAX. WIDTH (m)* SINGLE GATE MAX. WEIGHT (kg)* STOCK F/887L-SX 230 Vac 1PH LH 0,18 / 0,25 not locking 2,3 400 Available F/887L-DX 230 Vac 1PH RH 0,18 / 0,25 not locking 2,3 400 Available F/888L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/888L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate closed 2,3 400 Available by special order - please call us F/889L-SX 230 Vac 1PH LH 0,18 / 0,25 on gate opened and closed 2,3 400 Available F/889L-DX 230 Vac 1PH RH 0,18 / 0,25 on gate opened and closed 2,3 400 Available  * The gate structure, size and possible strong winds may affect the values as indicated. Always make sure the gate is adequate to be automatically operated and remove any possible friction points NOTE: See product brochure in manual for additional information Please call the office for discounts on these and to specify other details of the purchase. 01564 731035 We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.  

FADINI F/650L JUNIOR 650 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 1200 kg

Product Overview The FADINI JUNIOR 650 230Vac electromechanical geared motor operator is designed for sliding gates up to 1200 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 650 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 650, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 650 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 510 Max. absorbed current (A) 2.4 Max. torque (N) 1,000 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:32 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 13.5 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/633L JUNIOR 633 | 230Vac Electromechanical Geared Motor Operator for Sliding Gates up to 600 kg

Product Overview The FADINI JUNIOR 633 230Vac electromechanical geared motor operator is designed for sliding gates up to 600 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 230Vac geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 633 offers a powerful and quiet solution for automating sliding gates. The 230Vac geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 633, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates. The JUNIOR 633 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Max. absorbed power (W) 400 Max. absorbed current (A) 2 Max. torque (N) 600 Motor revolutions (rpm) 1,350 Speed (m/min) 10 Gear ratio 1:31 Working temperature (°C) -20 ÷ +50 Motor thermal protection (°C) 160 Grade of protection IP 54 Oil type F/706L Weight (kg) 11.3 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI F/624L JUNIOR 624 24Vdc Electromechanical Geared Motor Operator for Sliding Gates up to 400 kg

Product Overview The FADINI JUNIOR 624 24Vdc electromechanical geared motor operator is designed for sliding gates up to 400 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 24Vdc geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Pre-set for battery backup in case of power failure Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 624 offers a powerful and quiet solution for automating sliding gates. The 24Vdc geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 624, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates and pre-set for battery backup to ensure continuous operation during power failures. The JUNIOR 624 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Motor voltage (V) 24 Max. absorbed power (W) 220 Max. absorbed current (A) 6.3 Max. torque (N) 400 Motor revolutions (rpm) 3,000 Speed (m/min) 12 Gear ratio 1:61 Working temperature (°C) -25 ÷ +50 Grade of protection IP 54 Oil type F/706L Weight (kg) 11 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI MEC 200 Electromechanical Geared Motor Operator for Sliding Gates

FADINI MEC 200 Electromechanical Geared Motor Operator for Sliding Gates POWERFUL 230 Vac and 400 Vac geared motor operator, coupling of worm and bronze crown gear in oil bath, on ball bearings. RELIABLE Aluminium gear box and cover are a total guarantee of long life over the time. SAFE Adjustable torque control provided by a mechanical clutch system; the discs are lubricated by multifunctional grease to improve performance. STRONG AND COMPACT Base plate of pressure cast aluminium. VERSATILE Full range of models with various types of electric motors, options with air-cooled motors and electro-brake available. Depending on the way the rack is fixed on to the gate, models with horizontal or vertical pinion are available. The electronic control unit can be incorporated inside MEC 200 or stand alone in a polycarbonate box. TESTED AND CERTIFIED CE marking following type tests. SPECIFICATIONS   0,5 HP - 1PH 0,5 HP - 3PH 1 HP - 1PH 1 HP - 3PH 1,5 HP - 3PH Power supply (Vac – Hz) 230 - 50 230/400 - 50 230 - 50 230/400 - 50 230/400 - 50 Max. absorbed power (W) 510 575 1.130 1.030 1.500 Max. absorbed current (A) 2,4 2,1/1,2 5,7 3,7/2,2 5,1/3 Power yield (W) 0,37 0,37 0,73 0,73 1,1 Motor revolutions (rpm) 1.380 1.380 1.380 1.380 1.380 Capacitor (μF) 20 - 40 - - Rated torque (Nm) 40 40 80 80 110 Travel speed (m/min) 10 10 10 10 10 Gear ratio 1/32 1/32 1/32 1/32 1/32 Working temperature (°C) -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 Limit switch mechanical mechanical mechanical mechanical mechanical Grade of protection IP 55 55 55 55 55 Oil type F/706L F/706L F/706L F/706L F/706L Weight (kg) 19,5 o. - 19 v. 18,5 o. - 18 v. 23,5 o. - 23 v. 21,5 o. - 21 v. 25,5 o. - 25 v. Frequency of use very intensive very intensive very intensive very intensive very intensive PRODUCT CODE LIST / GUIDE PRODUCT CODE (click to view) VERSION HORIZONTAL / VERTICAL POWER (kW / HP) INCORPORATED CONTROL BOARD AIR-COOLED MOTOR WITH ELECTRO-BRAKE MAX. WEIGHT (kg) F/1964L 230 Vac 1PH o. Horizontal 0,37 / 0,5 - NO 1.200 F/1994L 230 Vac 1PH o. Horizontal 0,37 / 0,5 ELPRO 70/3 Plus NO 1.200 F/197567L 230 Vac 1PH o. Horizontal 0,73 / 1 - YES 1.800 F/196L 230/400 Vac 3PH o. Horizontal 0,37 / 0,5 - NO 1.250 F/197L 230/400 Vac 3PH o. Horizontal 0,73 / 1 - NO 1.850 F/198L 230/400 Vac 3PH o. Horizontal 1,1 / 1,5 - NO 2.000 F/199L 230/400 Vac 3PH o. Horizontal 0,37 / 0,5 ELPRO 70/3 Plus NO 1.250 F/19767L 230/400 Vac 3PH o. Horizontal 0,73 / 1 - YES 1.850 F/19867L 230/400 Vac 3PH o. Horizontal 1,1 / 1,5 - YES 2.000 F/2114L 230 Vac 1PH v. Vertical 0,37 / 0,5 - NO 1.200 F/2154L 230 Vac 1PH v. Vertical 0,37 / 0,5 ELPRO 70/3 Plus NO 1.200 F/212567L 230 Vac 1PH v. Vertical 0,73 / 1 - YES 1.800 F/211L 230/400 Vac 3PH v. Vertical 0,37 / 0,5 - NO 1.250 F/212L 230/400 Vac 3PH v. Vertical 0,73 / 1 - NO 1.850 F/213L 230/400 Vac 3PH v. Vertical 1,1 / 1,5 - NO 2.000 F/215L 230/400 Vac 3PH v. Vertical 0,37 / 0,5 ELPRO 70/3 Plus NO 1.250 F/21267L 230/400 Vac 3PH v. Vertical 0,73 / 1 - YES 1.850 F/21367L 230/400 Vac 3PH v. Vertical 1,1 / 1,5 - YES 2.000 F/7154L 230 Vac 1PH v. reversible Vertical 0,37 / 0,5 - NO 1.200 F/7155L 230/400 Vac 3PH v. reversible Vertical 0,37 / 0,5 - NO 1.250   NOTE: v. - vertical, o. - horizontal Each code includes an electromechanical geared motor operator with mechanical clutch, pinion for the rack, anchoring base plate for ground fixing with screws, mechanical limit switch, a pair of limit switch striking plates, release spanner. Electronic control unit and air-cooled motor with electro-brake are included only for the code numbers as indicated in the chart. The gate structure, size and possible strong winds may affect the value of indicated max. weight. Always make sure the gate is adequate to be automatically operated and remove any possible friction points. Reversible versions are possible to open or close by hand in case of power failure; no need that release handle or release spanner be operated. IP55 when inside the housing cover or casing.

FADINI NYOTA 115 EVO | Electromechanical Geared Motor Operator for Sliding Gates | Powerful and Stylish

Product Overview The FADINI NYOTA 115 EVO electromechanical geared motor operator is a powerful and stylish solution for automating sliding gates. Available in 230 Vac and 400 Vac, it features a coupling of worm and bronze crown gear in an oil bath, supported by ball bearings for smooth operation. Key Features 230 Vac and 400 Vac geared motor operator Aluminium gearbox and cover for long-term durability Anti-crush system with encoder and amperometric detection Electronic brake, acceleration, and deceleration on each cycle Versatile range of models with various electric motors CE marked and tested for compliance Master/slave function for bi-parting sliding gates Product Description The FADINI NYOTA 115 EVO offers powerful and reliable performance for sliding gates, combining advanced technology with durable construction. The aluminium gear box and cover ensure longevity, while the anti-crush system provides enhanced safety by reversing gate travel upon detecting obstacles. This motor operator is available in several models, each tailored to different power requirements and gate weights. The electronic control unit can be incorporated inside the NYOTA 115 EVO or housed in a separate polycarbonate box, providing flexibility in installation. Programming gate travel is simplified with a button, and the system includes features such as electronic brake, acceleration, and deceleration for smooth operation. Specifications Feature0.5 HP - 1PH0.5 HP - 3PH1 HP - 1PH1 HP - 3PH Power supply (Vac – Hz) 230 - 50 230/400 - 50 230 - 50 230/400 - 50 Max. absorbed power (W) 600 575 1,130 1,030 Max. absorbed current (A) 3.2 2.1/1.2 5.7 3.7/2.2 Power yield (W) 0.37 0.37 0.73 0.73 Motor revolutions (rpm) 1,380 1,380 1,380 1,380 Capacitor (μF) 30 - 30/40 - Rated torque (Nm) 40 40 80 80 Travel speed (m/min) 10 10 10 10 Gear ratio 1/32 1/32 1/32 1/32 Working temperature (°C) -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 -25 ÷ +80 Motor thermal protection (°C) 160 160 160 160 Limit switch magnetic magnetic magnetic magnetic Grade of protection IP 55 55 55 55 Oil type F/706L F/706L F/706L F/706L Weight (kg) 18.5 18 20 19.5 Frequency of use very intensive very intensive very intensive very intensive Product Code List / Guide F/1113L - 230/400 Vac 3PH, 0.37 kW / 0.5 HP, 1,250 kg max weight F/1114L - 230/400 Vac 3PH, 0.73 kW / 1 HP, 1,850 kg max weight F/1116L - 230 Vac 1PH, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1117L - 230 Vac 1PH, 0.73 kW / 1 HP, 1,800 kg max weight F/1121L - 230 Vac 1PH, 0.37 kW / 0.5 HP, ELPRO 12 EVO, 1,200 kg max weight F/1122L - 230 Vac 1PH, 0.73 kW / 1 HP, ELPRO 12 EVO, 1,800 kg max weight F/1269L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, 1,200 kg max weight F/1271L - 230 Vac 1PH reversible, 0.37 kW / 0.5 HP, ELPRO 12 PLUS FN, 1,200 kg max weight Notes: Each code includes an electromechanical geared motor operator with pinion for the rack, anchoring base plate with screws for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The electronic control unit and encoder are included only for the code numbers as indicated in the chart. The gate structure, size, and possible strong winds may affect the value of indicated max. weight. Always make sure the gate is adequate to be automatically operated and remove any possible friction points. Reversible versions are possible to open or close by hand in case of power failure; no need for the release handle or release spanner to be operated.

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI DARDO 430 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 430 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 430 offers reliable and efficient gate automation. Key Features Quiet operation with 230 Vac irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 430 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 230 Vac irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 430 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 430 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 43 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 430, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 430 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Max. absorbed power: 300 W Max. absorbed current: 1.7 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 3,000 N Working temperature: -20°C to +50°C Motor thermal protection: 160°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 8 kg Frequency of use: Semi-intensive 35% Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI NUPI 66 | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI NUPI 66 is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and collective use. This operator combines safety, ease of installation, and high resistance to weather conditions, making it a reliable choice for gate automation. Key Features Safe operation with innovative valve assembly controlling thrust power Incorporated capacitor for enhanced performance Stylish design and high-quality materials for weather resistance Easy to install and adjust Quick-to-respond release system by key Tested and certified with CE marking Product Description The FADINI NUPI 66 oil-hydraulic operator is designed for the efficient automation of swing gates. It features an innovative valve assembly that allows for electronic control of the thrust power, ensuring safe and reliable operation. The stylish design and choice of high-quality materials make the NUPI 66 highly resistant to various weather conditions. Installation and adjustment of the NUPI 66 are straightforward, making it a practical choice for both residential and collective settings. The operator includes a quick-to-respond release system that can be easily accessed with a key, providing convenience in case of power failure or manual operation needs. The NUPI 66 is tested and certified, bearing the CE marking following rigorous type tests, ensuring compliance with European safety and performance standards. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Power yield: 180 W Max. absorbed current: 1.2 A Rod stroke: 235 mm Rod diameter: 16 mm Linear speed opening/closing: ~16 mm/s Opening force: 0 ÷ 5,100 N Closing force: 0 ÷ 6,200 N Working temperature: -25°C to +80°C Oil type: 708L Grade of protection: IP67 Weight: 9.5 kg Frequency of use: Intensive Note: Product includes an oil-hydraulic operator complete with rear and front fixing brackets to weld and two release keys. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm

FADINI APROLI 280/700 ROBUSTO oil-hydraulic operator for swinging gates with articulated arm for residential and industrial use DISCREET For installation on gates where large pillars are involved: capable of a powerful though quiet action. Easy to install. OIL-HYDRAULIC Anti-crush safety ensured by the by-pass valves incorporated in the operator. Available with bidirectional oil-hydraulic locking device (irreversible). STRONG Cataphoresis treated steel, shearing preventing articulated arm. Manual override accessed by key. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 250 Absorbed current (A) 1,2 Power yield (kW / HP) 0,18 / 0,25 Torque (Nm) 250-400 Shaft rotation 130° Opening-closing time (s) 23 Working temperature (°C) -20°C / +80°C Grade of protection IP 67 Oil type 708L Weight including arm(kg) 19 Frequency of use Semi-intensive   Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm, fixing bracket, two keys to access the release device. With gate leaves wider than 2 m it is required that an electric lock be fitted on to the gate.  

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

FADINI DRIVE 700 ESTRU | Hydraulic Motor-Pump for Swing Gates

Product Overview The FADINI DRIVE 700 ESTRU is a hydraulic motor-pump specifically designed for swing gates used in residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 ESTRU features a separately installed oil-hydraulic motor-pump, ensuring efficient operation and easy maintenance. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 ESTRU hydraulic motor-pump is designed to meet a wide range of installation requirements for swing gates. This motor-pump is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump is installed separately from the jack, which is housed in an aluminum foundation box for enhanced durability. The DRIVE 700 ESTRU offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700 ESTRU, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic motor-pump with joints, manual release knob, and electric power supply cable. An electric lock is required for the non-locking reversible version.

FADINI DRIVE 700 | Oil-Hydraulic Jack for Swing Gates

Product Overview The FADINI DRIVE 700 is an oil-hydraulic underground operator designed for swing gates in both residential and industrial applications. Known for its powerful and reliable performance, the DRIVE 700 features an oil-hydraulic motor-pump installed separately from the jack, which is housed inside an aluminum foundation box with a steel fixing plate treated with electrolytic galvanization. Key Features Oil-hydraulic motor-pump and jack for robust performance Underground installation for discreet operation Available in reversible and irreversible versions Hydraulic slowdown (braking) in opening and closing 110° and 175° shaft rotation options Anti-crush safety ensured by by-pass valves Quiet and reliable operation High resistance to corrosion Product Description The FADINI DRIVE 700 oil-hydraulic jack is designed to meet a wide range of installation requirements for swing gates. This operator is suitable for both residential and industrial applications, providing powerful and reliable performance. The motor-pump and jack are installed separately, with the jack housed in an aluminum foundation box for enhanced durability. The DRIVE 700 offers several versions to suit different needs, including reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, and units with hydraulic slowdown for smooth opening and closing. The operator provides two shaft rotation options—110° and 175°—to accommodate various gate configurations. Safety is a key feature of the DRIVE 700, with anti-crush protection ensured by by-pass valves fitted on the motor-pump. This ensures safe operation and prevents accidents. The operator is designed for quiet operation, making it an ideal choice for residential areas where noise reduction is important. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 400 W Absorbed current: 2 A Max. torque: 235 Nm Max. pressure: 30 atm Opening/closing time: ~23 s (110°) | ~28 s (175°) Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Motor-pump static weight: 8 kg Weight of jack and accessories: 16 kg Frequency of use: Semi-intensive Note: The product includes one oil-hydraulic jack. The foundation box is not included. An electric lock is required for gate leaves wider than 2 meters.

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates

FADINI HINDI 880 EVO Oil-hydraulic operator for swing gates OIL-HYDRAULIC The innovative EVO valve design allows, in a single model, to configure the hydraulic locking device as required: N reversible - non locking A locking in open position B locking in closed position BB bidirectional locking (locking in open and closed position) Hydraulic slowdown (braking) in opening only, in closing only, in opening and closing, or non braking at all. FUNCTIONAL Anti-crush safety ensured by the two by-pass valves incorporated in the actuator. Easy release system by customized key. QUALITY Stylish design, external structure made of extruded anodized aluminium and accurate selection of high quality materials to ensure the utmost resistance to weather conditions. Easy to install: an adjustable ball bearing ring provides fixing on to the gate. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Rod stroke (mm) 150 280 400 Power supply (Vac – Hz) 230 - 50 230 - 50 230 - 50 Absorbed power (W) 250 250 250 Power yield (W) 180 180 180 Max. absorbed current (A) 1.2 1.2 1.2 Pump flow rate (l/min) 1,4 (P5) 1,4 (P5) | 0,85 (P3) 1,4 (P5) | 0,85 (P3) Rod diameter (mm) 20 20 20 Linear speed opening (mm/s) ~ 15 ~ 17 (P5) | ~ 11 (P3) ~ 17 (P5) | ~ 11 (P3) Linear speed closing (mm/s) ~ 14 ~ 14 (P5) | ~ 9 (P3) ~ 14 (P5) | ~ 9 (P3) Opening force (N) 0 ÷ 4.000 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) 0 ÷ 4.200 (P5) | 0 ÷ 4.700 (P3) Closing force (N) 0 ÷ 5.600 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) 0 ÷ 5.400 (P5) | 0 ÷ 6.300 (P3) Working temperature (°C) -25°C / +80°C -25°C / +80°C -25°C / +80°C Oil type 708L 708L 708L Grade of protection IP 67 67 67 Frequency of use very intensive very intensive very intensive Weight (kg) 9.5 11 14   PRODUCT GUIDE PRODUCT CODE (click to view) STROKE (mm) EVO HYDRAULIC LOCKING DEVICE BRAKING SLOWDOWN OPENING TIME (s) PUMP SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/870P5L 150 YES - ~10 P5 fast 1,5 300 F/87084P5L 150 YES YES ~10 + TR P5 fast 1,5 300 F/880P5L 280 YES - ~17 P5 fast 2,8 550 F/88084P5L 280 YES YES ~17 + TR P5 fast 2,8 550 F/880P3L 280 YES - ~26 P3 slow 3,2 550 F/88084P3L 280 YES YES ~26 + TR P3 slow 3,2 550 F/890P5L 400 YES - ~26 P5 fast 4 550 F/89084P5L 400 YES YES ~26 + TR P5 fast 4 550 F/890P3L 400 YES - ~37 P3 slow 4,5 550 F/89084P3L 400 YES YES ~37 + TR P3 slow 4,5 550 F/884P3L 400 - - ~ 45 P3 slow 8 550 F/88484P3L 400 - YES ~45 + TR P3 slow 8 550 TECHNICAL NOTES For gates wider than 2 m per leaf it is required that an electric lock be fitted. With gate leaves wider than 4 m, the reversible version (no hydraulic locking device) is recommended plus an electric lock on the gate. With all HINDI 880 EVO actuators whose valve configuration is reversible (no hydraulic locking device), an electric lock is required on to the gate. On request, HINDI 880 EVO P10 faster (twice as much approx.) than P5 model: it is advisable to consult our technical office for such installations. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

FADINI MEC 700/80 Ventil Motor Pump for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motor pump. TECHNICAL DATA - MEC 700/80 VENTIL MOTOR PUMP  Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 510 Absorbed current (A) 2,4 Max. pressure (atm) 40 Hydraulic pump flow rate (l/min) 1,6 [P6] | 2,6 [P12] Working temperature (°C) -25°C / 80°C Grade of protection IP/motor-pump 65 Oil type 708L Weight – code 7014P6L (kg) 10 Weight – code 7012L (kg) 5,5 Weight – code 7037L (kg) 7,2 Frequency of use Intensive   PRODUCT GUIDE PRODUCT CODE (click to view) HYDRAULIC LOCKING PUMP RESERVOIR TYPE F/7014P6L reversible P6 slow single F/7014P12L reversible P12 fast single F/7022P6L bidirectional P6 slow single F/7022P12L bidirectional P12 fast single F/701486P6L reversible P6 slow double F/701486P12L reversible P12 fast double F/702286P6L bidirectional P6 slow double F/702286P12L bidirectional P12 fast double   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes an oil-hydraulic motor-pump complete with joints, manual release knob and electric cable for power supply.

FADINI MEC 800 Special swing gate operator for industrial use

FADINI MEC 800 Special swing gate operator for industrial use SOLID Capable of operating large, (even in-filled) gates, doors and trap doors without limit of operations. COMPLETE RANGE Piston stroke options available up to 1.000 mm. Hydraulic slowdown (braking) on opening/closing (optional). It is possible that even two actuators can be fitted on to one single gate by using the doubletank, oil-hydraulic motor-pump unit. RELIABLE Each component is of extremely high quality level and made to endure any weather conditions. Release by special spanner on the hydraulic motorpump. TECHNICAL DATA - MEC 800 Special Rod diameter (mm) 22 Piston stroke (mm) 280 / 400 / 500 / 600 / 700 / 800 / 900 / 1.000 mm Force (N) 0 ÷ 7.000 N   PRODUCT GUIDE PRODUCT CODE (click to view) ROD STROKE (mm) BRAKING SLOWDOWN SINGLE GATE MAX. WIDTH (m) SINGLE GATE MAX. WEIGHT (kg) F/7012L 280 - 2.8 400 F/701284L 280 on opening / closing 2.8 400 F/7037L 400 - 4 700 F/703784L 400 on opening / closing 4 700 F/7114L 500 - 5 700 F/711484L 500 on opening / closing 5 700 F/7115L 600 - 6 800 F/711584L 600 on opening / closing 6 800 F/7116L 700 - 7 900 F/711684L 700 on opening / closing 7 900 F/7117L 800 - 8 1000 F/711784L 800 on opening / closing 8 1000 F/7118L 900 - 9 1100 F/711884L 900 on opening / closing 9 1100 F/7119L 1000 - 10 1200 F/711984L 1000 on opening / closing 10 1200   TECHNICAL NOTES An electric lock is always recommended with gate leaves wider than 2 m. MEC 700/80 VENTIL MOTOR PUMP is essential in operating a gate using MEC 800 Special The hydraulic motor-pump unit fitted with a P12 pump operates a gate at a speed that is twice as much as that of a P6 pump (recommended version). Speed varies according to the type of actuator MEC 800 SPECIAL used and gate inertia. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. The reversible (non locking) oil-hydraulic motor-pump unit requires an electric lock on the gate. IMAGE CHART: Each code includes a double-acting oil-hydraulic actuator complete with rear and front fixing plates to weld, joints and protection cover. [I]: TR is the slowdown time, a value changing according to the adjustment made on the actuator. [K]: The installation distances for the special strokes are meant to make the most of the slowdown on opening and closing. For these actuators contact our technical office in advance and provide the structural dimensions of the gate to be automated.

FADINI COMBI 787 | Oil-Hydraulic Underground Operator for Large Swing Gate

Product Overview The FADINI COMBI 787 is an oil-hydraulic underground operator designed for large swing gates, offering a discreet and robust solution for gate automation. This operator is housed inside a treated steel foundation box, providing high resistance to corrosion. The foundation box is also available in AISI 304 stainless steel as an option. The COMBI 787 is capable of a 110° shaft rotation angle, ensuring reliable and quiet operations. Key Features Oil-hydraulic motor-pump unit with integrated cylinder 110° shaft rotation angle Available with or without hydraulic locking device Hydraulic slowdown (braking) in opening and closing Flow regulator for precise control Anti-crush safety ensured by by-pass valves Easy emergency release from both inside and outside the gate Durable foundation box made of 5 mm thick electrolytically galvanized steel Optional AISI 304 stainless steel foundation box No particular maintenance required Product Description The FADINI COMBI 787 oil-hydraulic underground operator is designed for large swing gates, combining strength and discretion in a single, all-in-one unit. This operator is housed in a robust foundation box made of treated steel, ensuring high resistance to corrosion. The foundation box can accommodate mechanical gate stops, adjustable in both open and closed positions, and allows for installation or removal without detaching the gate. The COMBI 787 is available in various versions to meet different installation requirements. Options include reversible units without hydraulic locking, irreversible units with bidirectional hydraulic locking, units with hydraulic slowdown (braking) in opening and closing, and units with flow regulators. The anti-crush safety feature is ensured by by-pass valves fitted to the operator. Emergency release is straightforward, thanks to a pressed steel bracket that is easy to operate from both inside and outside the gate using a specially designed spanner with an ergonomic grip. The operator is designed for intensive use, making it suitable for high-frequency operations. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 330 W Absorbed current: 1.8 A Power yield: 0.24 kW / 0.33 HP Torque: 250-400 Nm Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Opening/closing time: ~23 s (110°) Weight including box: 34 kg Frequency of use: Intensive Product Guide CODEBIDIRECTIONAL HYDRAULIC LOCKINGSLOWDOWN BRAKINGFLOW REGULATORSINGLE GATE MAXIMUM WIDTH (m)SINGLE GATE MAXIMUM WEIGHT (kg) F/787N3L NO NO NO 6 1000 F/7877BB3L YES NO NO 6 1000 F/78778BB3L YES YES NO 6 1000 F/787789BB3L YES YES YES 6 1000 F/7878N3L NO YES NO 6 1000 F/78789N3L NO YES YES 6 1000 F/78779BB3L YES NO YES 6 1000 F/7879N3L NO NO YES 6 1000 Note: Each code includes an oil-hydraulic operator complete with electric power supply cable. For codes including the letter “N” (non-locking, reversible), an electric lock is required. An electric lock is also necessary for gate leaves wider than 2 meters.

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 110° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° or 175° (click to view) shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 23 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/767N3DXL RIGHT NO NO NO 3 700 F/767N3SXL LEFT NO NO NO 3 700 F/7677BB3DXL RIGHT YES NO NO 3 700 F/7677BB3SXL LEFT YES NO NO 3 700 F/76778BB3DXL RIGHT YES YES NO 4 700 F/76778BB3SXL LEFT YES YES NO 4 700 F/767789BB3DXL RIGHT YES YES YES 4 700 F/767789BB3SXL LEFT YES YES YES 4 700 F/76779BB3DXL RIGHT YES NO YES 4 700 F/76779BB3SXL LEFT YES NO YES 4 700 F/7678N3DXL RIGHT NO YES NO 4 700 F/7678N3SXL LEFT NO YES NO 4 700 F/76789N3DXL RIGHT NO YES YES 4 700 F/76789N3SXL LEFT NO YES YES 4 700 F/7679N3DXL RIGHT NO NO YES 4 700 F/7679N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle

FADINI COMBI 740 Oil-hydraulic underground operator for swing gate (without enclosure) - 175° shaft rotation angle DISCREET, STRONG AND INVISIBLE All-in-one, oil-hydraulic operator made up of a hydraulic motor-pump unit and an integrated cylinder (jack), housed inside a foundation box made of treated steel (3 mm thickness and electrolytic galvanization) ensuring high resistance to corrosion. Foundation box (enclosure) available in AISI 304 stainless steel option. No particular maintenance required. OIL-HYDRAULIC Wide range of versions (right- and left-handed) to meet any installation requirements: reversible without hydraulic locking device, irreversible with bidirectional hydraulic locking device, with hydraulic slowdown (braking) in opening and closing and with flow regulator. Anti-crush safety ensured by the by-pass valves fitted on to the operator. 110° (click to view) or 175° shaft rotation options; quiet and reliable operations. SAFE Pressed steel emergency release bracket, easy to operate from both inside and outside the gate by means of a specially designed spanner with ergonomic grip. TESTED AND CERTIFIED CE marking following type tests. TECHNICAL DATA Power supply (Vac – Hz) 230 - 50 Absorbed power (W) 1.100 Absorbed current (A) 1,8 ÷ 3,5 Power yield (kW / HP) 0,25 / 0,33 Torque (Nm) 250-400 Working temperature (°C) -20°C / 80°C Grade of protection IP/motor-pump 67 Oil type 708L Opening/closing time (s) ~ 28 Weight including box (kg) 27 Frequency of use Intensive PRODUCT GUIDE CODE (click to open) VERSION BIDIRECTIONAL HIDRAULIC LOCKING (irreversible) SLOWDOWN BRAKING FLOW REGULATOR SINGLE GATE MAXIMUM WIDTH (m) SINGLE GATE MAXIMUM WEIGHT (kg) F/769N3DXL RIGHT NO NO NO 3 700 F/769N3SXL LEFT NO NO NO 3 700 F/7697BB3DXL RIGHT YES NO NO 3 700 F/7697BB3SXL LEFT YES NO NO 3 700 F/76978BB3DXL RIGHT YES YES NO 4 700 F/76978BB3SXL LEFT YES YES NO 4 700 F/769789BB3DXL RIGHT YES YES YES 4 700 F/769789BB3SXL LEFT YES YES YES 4 700 F/76979BB3DXL RIGHT YES NO YES 4 700 F/76979BB3SXL LEFT YES NO YES 4 700 F/7698N3DXL RIGHT NO YES NO 4 700 F/7698N3SXL LEFT NO YES NO 4 700 F/76989N3DXL RIGHT NO YES YES 4 700 F/76989N3SXL LEFT NO YES YES 4 700 F/7699N3DXL RIGHT NO NO YES 4 700 F/7699N3SXL LEFT NO NO YES 4 700 NOTE: Each code includes an oil-hydraulic operator complete with electric power supply cable. With those codes that include the letter “N” (non locking - reversible) an electric lock is needed. With gate leaves wider than 2 m, an electric lock is also required.

V2 Gate Automation V2 HYPERFOR 400V Motor 23F004 | Sliding Gate up to 4000Kg

Product Overview The V2 HYPERFOR 400V Motor 23F004 is designed for sliding gates weighing up to 4000kg. This three-phase motor offers robust construction and advanced features for efficient gate automation. Key Features Designed for sliding gates weighing up to 4000kg Built-in digital control unit for precise operation Galvanized painted sheet steel cabinet for durability Obstacle detection enhances safety Self-learning of opening and closing times for optimized performance Synchronized operation of two motors using the SYNCRO module Possibility to adjust gearmotor torque with industrial electromechanical limit switch and M6 pinion Three-phase motor with inverter for precise control (230V version with inverter) Programmable acceleration and deceleration (230V version with inverter) Product Description The V2 HYPERFOR 400V motor is ideal for sliding gates up to 4000kg, offering robust performance and reliable automation. It features a built-in digital control unit that ensures precise management of gate movements, enhancing operational efficiency. Constructed with a galvanized painted sheet steel cabinet, this motor is designed for intensive use, making it suitable for large gates. It includes advanced features such as obstacle detection and self-learning of opening and closing times, contributing to enhanced safety and optimized performance. The HYPERFOR 400V motor supports synchronized operation of two motors using the SYNCRO module, enabling coordinated movement for double gates. It allows for flexibility with gearmotor torque adjustment through industrial electromechanical limit switches and M6 pinion, accommodating various gate automation needs. Equipped with a three-phase motor and inverter (230V version with inverter), the HYPERFOR 400V motor offers programmable acceleration and deceleration, allowing users to customize gate operation according to specific requirements. What's in the Box 1 x V2 HYPERFOR 400V Motor 23F004

V2 Gate Automation V2 FORTECO2200 230Vac Motor 23E015 | Sliding Gate up to 2200Kg

Product Overview The V2 FORTECO2200 230Vac Motor 23E015 is designed for sliding gates weighing up to 2200kg. This motor offers robust construction and advanced features for reliable gate automation. Key Features Designed for sliding gates weighing up to 2200kg Painted aluminium casing for durability and weather resistance Practical release system with customized key for manual operation M6 pinion and gears for maximum lifespan and noise reduction Cooling fan to increase the working cycle Strong galvanised steel anchoring plate for secure motor fixation Product Description The V2 FORTECO2200 230Vac motor is ideal for sliding gates up to 2200kg, providing reliable and efficient operation. It features a painted aluminium casing that ensures durability and weather resistance, suitable for various environmental conditions. This motor includes a practical release system with a customized key, allowing easy manual operation in case of power outage. The M6 pinion and gears are designed to maximize lifespan and minimize operational noise, ensuring quiet and smooth gate operation. A cooling fan is integrated into the motor to enhance the working cycle, maintaining optimal performance even during intensive use. Additionally, a strong galvanised steel anchoring plate with four clamps ensures secure fixation of the motor, contributing to stable and reliable installation. What's in the Box 1 x V2 FORTECO2200 230Vac Motor 23E015

V2 Gate Automation V2 CALYPSO500 230Vac Linear Screw Motor | Swing Gate up to 3m/500Kg

Product Overview The V2 CALYPSO500 230Vac linear screw motor is designed for swing gates with leaves up to 3 meters wide and weighing up to 500 kilograms. This motor provides a robust solution for gate automation, offering durability and ease of installation. Key Features Designed for swing gates up to 3m wide and 500kg Single version suitable for both right and left leaves Wear-resistant gears ensure high motor resistance Practical release system for easy, single-handed operation Rear bracket facilitates easy and manageable installation in various premises Protected power cable position enhances safety and durability Product Description The V2 CALYPSO500 230Vac swing gate motor is tailored for swing gates up to 3 meters wide and weighing up to 500 kilograms. It features wear-resistant gears that ensure long-term durability and reliable operation. This motor includes a practical release system, allowing easy and single-handed operation for manual gate operation when necessary. The rear bracket design facilitates straightforward installation in premises of any kind, making it suitable for various gate configurations. With a protected power cable position, the CALYPSO500 motor enhances safety and ensures prolonged cable life, contributing to the overall durability of the installation. What's in the Box 1 x V2 CALYPSO500 230Vac linear screw motor

V2 Gate Automation V2 Ayros800D | 230Vac Sliding Gate Motor | For Gates up to 800Kg

Product Overview The V2 Ayros800D is a 230Vac sliding gate motor designed for gates weighing up to 800Kg. This motor features a built-in digital control unit, ensuring accurate and safe operation with advanced functionality for residential or commercial applications. Key Features Designed for sliding gates up to 800Kg Built-in digital control unit Painted aluminum casing Accurate and safe operation with encoder Obstacle detection Self-learning of opening and closing times Synchronized operation of two motors using the SYNCRO module Magnetic limit switches Product Description The V2 Ayros800D sliding gate motor provides a reliable and efficient solution for automating gates up to 800Kg. Featuring a built-in digital control unit, this motor ensures precise and safe operation with an encoder for accurate movement tracking. The motor's painted aluminum casing offers durability and protection against environmental factors. Advanced features such as obstacle detection and self-learning of opening and closing times enhance the motor's functionality and safety. The V2 Ayros800D supports synchronized operation of two motors using the SYNCRO module, making it suitable for larger or heavier gates. Magnetic limit switches ensure precise stopping points, contributing to the motor's reliable and safe operation. What's in the Box 1 x V2 Ayros800D 230Vac sliding gate motor    

RIB AUTOMATION KING 24V EVO OPERATOR ONLY AA14090

KING EVO 24V OPERATOR FOR SWING GATES WITH EACH LEAF UP TO 4M LONG AND WEIGHING UP TO 400KG  Will fit same hinge points/brackets as older King operators parts ref. AA14090

RIB AUTOMATION IDRO 39/2B HYDRAULIC OPERATOR AA10859 for SWING Gates

IDRO 39/2B HYDRAULIC OPERATOR FOR SWING GATES BLOCK IN OPEN AND CLOSED POSITION PARTS REF AA1085

RIB AUTOMATION Duke 110 230V motor only AA10975

DUKE 110 IRREVERSIBLE UNDERGROUND OPERATOR FOR SWING GATES 3.5M EACH LEAF AND UP TO 800KG 230V 110 DEGREE MAX OPENING FOUNDATION BOX AVAILABLE SEPARATELY  AA10975

RIB AUTOMATION Duke 110 24V motor only AA10936

DUKE 110 IRREVERSIBLE 24V UNDERGROUND OPERATOR FOR SWING GATES UP TO 3.5M PER LEAF AND WEIGHING UP TO 800KG 24V 110 DEGREE MAX OPENING  MOTOR ONLY - FOUNDATION BOX AVAILABLE SEPARATELY

RIB AUTOMATION DUKE 180 Degree Motor Only AA10985 | Heavy Duty Underground Operator

Product Overview The DUKE 180 Degree Motor Only AA10985 is a robust underground operator designed for heavy gates. With its oversized mechanics and anti-corrosion CATAPHORESIS treatment, this unit ensures durability and reliability with minimal maintenance. The adjustable mechanical stopper ensures precise gate positioning, eliminating the need for ground stoppers or electric limit switches. Developed and assembled by RIB, the DUKE operator offers extremely silent and precise movement. Product Description The DUKE underground operator is perfect for heavy gates, offering a durable solution with its reinforced cover and mechanical design. The anti-corrosion CATAPHORESIS treatment protects against water, dust, and rust, ensuring longevity. In the event of a power failure, the gate leaves can be manually operated using the release mechanism. The adjustable mechanical stoppers provide accurate positioning during both opening and closing. The DUKE operator is designed and assembled by RIB, guaranteeing silent and precise gate movements. Key Features Suitable for heavy gates with oversized mechanics Minimal maintenance required Reinforced cover and mechanical design for durability Anti-corrosion CATAPHORESIS treatment Manual operation in case of power failure Adjustable mechanical stopper for precise gate positioning Extremely silent and precise movement 180-degree gate opening angle What's in the Box 1 x DUKE 180 Degree Motor Only 1 x Adjustable mechanical stopper 1 x Manual release kit Specifications Motor Type: 230v underground operator Maximum Gate Opening Angle: 180 degrees Corrosion Protection: CATAPHORESIS treatment Features: Adjustable mechanical stopper, manual release mechanism