NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g