BENINCA BOB.50SR, Multi position bracket (BOB50 only)

BOB.50SR, Multi position bracket (BOB50 only)

Akuvox A08 - IP Silmline Access Control Reader with QR Code Reader, Keypad, RFID & Bluetooth (Surface)

A08 Minimal Footprint, Mighty Unlocking A08, iF Design Award 2025 Winner, is a cutting-edge access control terminal featuring a compact profile and advanced unlocking capabilities, ensuring robust security without compromising efficiency.     A08 Specification Physical & Power Front panel: Toughened GlassFrame: Aluminum AlloyRFID card reader: 13.56MHz & 125kHzRelay out: 1Inputs: 2Wiegand: SupportRS485: SupportSpeaker: 8Ω / 0.5WTamper proof alarm: SupportEthernet port: RJ45, 10/100Mbps adaptive12V DC connector (if not using PoE)Power output: 12V 600mAIP Level: IP65IK Rating: IK09Installation: Flush-mounted or Wall-mountedDimension: 50 x 140 x 26.7 (mm)Working Humidity: 10~90%，no condensingWorking Temperature: -20°C ~ +55°CStorage Temperature: -30°C ~ +70°C Networking & Protocol Protocols support: IPv4, HTTP, HTTPS, FTP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP Deployment & Maintenance Auto-ProvisioningWeb management portalWeb-based packet dumpConfiguration backup / restoreFirmware upgradeAkuvox Cloud managementAkuvox SDMC & ACMS Door Entry Feature Access scheduleAccess level managementSupport switch to reader modeDoor access logsFlexible shift scheduling and attendance management Application Scenario Provides access control for buildings such as condominiums, apartment buildings, office buildings, gated communities and industrial buildings

NICE SOLEMYO-KIT | Solar Power Kit for 24V Automation | 15W Panel / 20Ah Battery | 24V

Product Overview The SOLEMYO-KIT is a comprehensive solar power solution designed for gate, garage door, and road barrier automation systems. This self-contained kit enables installations in remote locations without mains power connection or excavation requirements. The system combines high-efficiency photovoltaic technology with extended battery reserves to ensure reliable operation even during prolonged overcast conditions. Key Features Complete solar power system for 24V automation systems Installable anywhere without mains power connection No excavation or wiring required for power supply Extended energy reserves for continuous operation Low power consumption design Weather-resistant components LED indication of full charge status Alternative mains charging capability Environmentally friendly clean energy solution Compatible with all Nice 24V automation systems Carrying handles for easy transportation Smart charging control circuit Specifications ComponentParameterValue PSY24 Battery Box Voltage (V) 24 Maximum Current (A) 10 Battery Capacity (Ah) 20 Protection Class IP44 Operating Temperature (°C) -20 to +50 Dimensions (mm) 235 x 170 x 258h Weight (kg) 14 SYP Solar Panel Maximum Power (Wp) 15 System Voltage (V) 24 Operating Temperature (°C) -40 to +85 Dimensions (mm) 390 x 28 x 415h Weight (kg) 1.9 SYA1 Mains Adapter Power Supply (VAC) 110-240 50/60Hz Maximum Power (W) 60 Operating Temperature (°C) 0 to +40 Dimensions (mm) 132 x 58 x 30h Weight (kg) 0.345 Accessories Kit includes: 1x SYP photovoltaic solar panel (15W, 24V) 1x PSY24 battery box with control circuit and carry handles 1x SYA1 mains adapter for manual charging Charging control circuit with LED indicators Installation hardware and documentation Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

CAME SEL Digital Surface Mounted Keypad including Control Card

SEL Digital Surface Mounted Keypad including Control Card  

BEA LZR-PS - Power supply for 2x LZR Sensors

Product Overview This 24V DC 0.75A power supply is designed specifically for BEA LZR laser safety sensors. A single unit can power up to two laser safety sensors simultaneously. Each BEA sensor installation requires one appropriate power supply for proper operation.

REMOTE CONTROL - Universal remote control for BEA sensors.

Product Overview Universal remote control for the adjustments of our sensors.  

BEA LZR HOUSING BRACKET - Bracket accessory

Product Overview Bracket Accessory for LZR range. Housing bracket.  

BEA LZR-BA - Bracket accessory

Product Overview Bracket Accessory for LZR range.

BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

BFT TIMER DST - Digital Two-Channel Timer

Product Overview A digital timer with 24-hour, seven-day programming capability, featuring two channels and Daylight Saving Time (DST) functionality. Specifications Programming 24-hour, seven-day Channels Two-channel operation Features DST (Daylight Saving Time) enabled Type Digital  

BFT Q.BO WIRELESS TOUCH KEYPAD | 433MHz

Product Overview A wireless digital keypad featuring 0-9 numeric buttons with 433MHz rolling code technology. Compatible with BFT products, this keypad offers quick installation and comprehensive access management capabilities. Technical Specifications Frequency 433MHz Security Rolling code operation Keypad Type 0-9 numeric buttons User Capacity Up to 100 users Application Management Up to 10 applications Key Features Quick and easy installation Minimum downtime for setup Compatible with BFT product range Wireless operation Multi-user management Multiple application support

BFT Q.BO KEY WM - Hardwired Key Switch with Double Contact

Product Overview Hardwired key selector switch with double contact, designed for outdoor installation. Features non-latching operation.  

BFT PUSH TO EXIT - Stainless Steel Push to Exit Button

Product Overview Hardwired push to exit button in stainless steel finish, complete with surface mounting housing.  

BFT PUSH BUTTON 3 WAY - Three-Way Push Button Control

Product Overview Three-way control push button featuring raise, stop, and lower functions.  

BFT PUSH BUTTON 1 WAY - Exterior Push Button with IP56 Enclosure

Product Overview Push button with IP56 rated enclosure for exterior installation.  

BFT KEY SWITCH 2 - 2 position latching key switch

Product Overview High quality key switch featuring two position latching functionality.  

BFT BESAFE RX - SEAV Controller for reader

Product Overview Control unit designed for use with SEAV proximity reader systems.  

BFT BESAFE READER - SEAV Proximity reader

Product Overview Proximity reader for SEAV access control systems, compatible with SEAV proximity cards and fobs. Compatibility Compatible With SEAV Proximity Cards SEAV Proxy Fobs  

BFT BESAFE KEY FOB - SEAV Proxy Fob

Product Overview Proximity fob for SEAV access control systems.  

BFT BESAFE CARD - SEAV Proximity Card

Product Overview Proximity card for SEAV access control systems.  

BFT ACV20 - Protective Covers for Desme Photocells

Product Overview Protective covers designed specifically for Desme photocells.  

CAME ZLX24SA Conversion Kit for ZLJ24 And ZL19

Product Overview CAME ZLX24SA Conversion Kit 88006-0085  

CAME ZLX ENCLOSURE

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

Forematic A-R22 Vehicle Tag Reader System With Two USB Tags

Forematic A-R22 Vehicle Tag Reader System With Two USB Tags This vehicle ID receiver will open a gate or door for vehicles carrying a valid long-range radio frequency ID tag. The receiver can be connected to and powered from all known control panels. The set is supplied with two pre-programmed ID tags. The receiver controls the gate through two relays, one for opening and another for closing. Gates and barriers with auto-close functionality enabled will only use the OPEN relay output. A blue LED indicates when a vehicle ID tag is within range. Mount the receiver in a plastic waterproof housing at least 1.5m above ground for optimal RF reception. There is no sensitivity adjustment or any other serviceable parts inside the receiver. Specifications 12-24V AC/DC Iq=20mA Form A relay 1A @ 12V 44 x 50 x 24mm

Videx 701T/24 BST/GMT Digital Time Clock 24V AC or DC

Product Overview The Videx 701T/24 BST/GMT digital time clock is a versatile and reliable solution for various timing needs. It features automatic BST/GMT correction, six fully programmable on/off times, a trade button input, and a 3A relay output. The time clock operates from either 24V AC or DC and is housed in a durable white ABS plastic box. The device also includes a three-month rechargeable onboard battery backup to maintain the correct time and all-time bands during mains failure. Key Features 24V AC or DC operation Dry contact 3A rated relay output (CO, NO & NC) Six fully-programmable on/off times Automatic British summertime correction (BST/GMT) Trade button input with adjustable relay time from 1 to 99 seconds Easy-to-read 2 lines 16 characters backlit LCD display Three-month rechargeable onboard battery backup Mounted in a white ABS plastic box Product Information Operating Voltage 24V AC or DC Relay Output Dry contact 3A rated (CO, NO & NC) Programmable Times Six on/off times Dimensions 110 x 70 x 30 mm Battery Backup Three-month rechargeable onboard battery Display 2 lines 16 characters backlit LCD Housing Material White ABS plastic

Akuvox A03 - IP Access Control Reader, BLE, 13.56MHz and NFC

Akuvox A03 - IP Access Control Reader, BLE, 13.56MHz and NFC The Akuvox A03 Access Control Reader provides contactless access authentication via a choice of Bluetooth 5.0 (BLE), RFID and NFC - providing a flexible and secure door / gate access solution. Part of the new Akuvox A0 Access Control Series, the A03 combines compact, modern design with simplicity and reliable performance. The BLE and NFC authentication allows touch-free, keyless access via smartphone. The A03 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Access authentication via BLE, RFID & NFC Web interface administration Keyless entry via smartphone (BLE, NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm Wave hand to unlock when using the Akuvox My MobileKey app with BLE 5.0 technology IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS DescriptionA03 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods BLE, RFID, NFC RFID Supported Frequencies 13.56MHz & 125kHz Bluetooth Version Bluetooth 5.0 Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg  

Akuvox A02 - IP Access Control Reader, Keypad, RFID 13.56MHz, 125Khz and NFC

Akuvox A02 - IP Access Control Reader, Keypad, RFID 13.56MHz, 125Khz and NFC The Akuvox A02 Access Control Reader provides dual access authentication via Keypad, RFID and NFC - providing a flexible and secure door / gate access solution. Part of the new Akuvox A0 Access Control Series, the A02 combines compact, modern design with simplicity and reliable performance. The dual option authentication allows touch-free access via RFID cards & keyfobs or keyless access via smartphone NFC. The A02 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Dual format access authentication via multi-frequency RFID, NFC & keypad Web interface administration Remote configuration and management Keyless entry via smartphone (NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS   DescriptionA02 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods Keypad, RFID, NFC Dual Authentication Available as a combination of any two authentication methods RFID Supported Frequencies 13.56MHz, 125KHz Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg

Akuvox A01 - IP Access Control Reader, RFID 13.56MHz, 125Khz and NFC

Akuvox A01 - IP Access Control Reader, RFID 13.56MHz, 125Khz and NFC The Akuvox A01 Access Control Reader provides dual access authentication via RFID and NFC - providing a completely contactless door / gate access solution.   Part of the new Akuvox A0 Access Control Series, the A01 combines compact, modern design with simplicity and reliable performance.   The dual option authentication ensures touch-free access via RFID cards & keyfobs or keyless access via smartphone NFC.   The A01 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Dual format access authentication via multi-frequency RFID and NFC Web interface administration Remote configuration and management Keyless entry via smartphone (NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm Toughened glass front panel IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS DescriptionA01 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods RFID, NFC Dual Authentication Available as a combination of RFID & NFC RFID Supported Frequencies 13.56MHz, 125KHz Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy & Toughened Glass Surface Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg

Locinox DINO | 180° Double Bearing Hinge | Aluminium Housing, Stainless Steel Bearings

Product Overview The Locinox DINO is a robust 180° double bearing hinge designed for gates. Featuring an aluminium housing and stainless steel bearings, this hinge ensures a smooth and reliable opening and closing mechanism. The DINO hinge is easy to install with the innovative Quick-Fix system, providing a secure and vandal-proof fixing. Its aesthetic design makes it an ideal choice for both functional and stylish gate installations. Key Features 180° opening angle Contains 2 stainless steel bearings for smooth operation Anti-theft and vandal-proof fixing Compatible with Mammoth-180 Supports gates up to 150 kg (maximum width of 1.5 m) Suitable for left & right turning gates Aesthetic design with powder-coated aluminium housing Fast and easy installation with Quick-Fix Sold per pair Product Description Specifications Opening Angle: 180° Bearings: 2 stainless steel bearings Fixing: Anti-theft and vandal-proof Compatibility: Can be combined with Mammoth-180 Gate Capacity: Up to 150 kg (max width 1.5 m) Turning Direction: Left & right turning gates Design: Aesthetic, powder-coated aluminium housing Installation: Quick-Fix system Packaging: Packed per pair The Locinox DINO hinge is designed for those who need a reliable and durable solution for their gates. The hinge features a 180° opening angle, making it versatile for various gate applications. The inclusion of two stainless steel bearings ensures a smooth and seamless operation, reducing wear and tear on the gate and the hinge itself. The DINO hinge is built with security in mind. Its anti-theft and vandal-proof fixing system ensures that the hinge remains securely in place, providing peace of mind. The hinge is also compatible with the Mammoth-180, allowing for further customization and enhancement of your gate system. Constructed from powder-coated aluminium, the DINO hinge not only offers a sleek and modern aesthetic but also provides excellent durability and resistance to the elements. The Quick-Fix installation system makes the hinge easy to mount, saving time and effort during the setup process. This hinge is suitable for gates up to 150 kg in weight and with a maximum width of 1.5 m, making it a versatile choice for various gate types. Whether you need a hinge for a left or right turning gate, the DINO hinge meets the requirements with its robust design and flexible installation options. NOTE: Images may differ from the actual product.

Locinox SFKM | Stainless Steel Surface Mounted Keep for Fortylock, Fiftylock, and Sixtylock | Square Profiles

Product Overview The Locinox SFKM is a stainless steel surface mounted keep designed for use with Fortylock, Fiftylock, and Sixtylock insert locks, specifically for square gate profiles. This aesthetically pleasing keep is ideal for small metal, aluminium, and PVC gates. Its limited 8 mm depth ensures a discreet look while providing robust functionality. The innovative Quick-Fix system ensures a fast and strong fixation, making installation quick and easy. This unique keep, when combined with the insert lock, ensures a strong gate anchoring for enhanced security and durability. Key Features Stainless steel keep for square profiles as of 40 mm Compatible with Fortylock, Fiftylock, Sixtylock, and Eightylock Extruded aluminium stop plate with rubber strip for long-term use Includes innovative Quick-Fix fixations and self-drilling screws Easy left or right changing Elegant design with a visible thickness of 8 mm Adjustable stop plate for 40 mm to 60 mm gate frames Adjustable guide to prevent damage to the day bolt and post Product Description Specifications Material: Stainless steel Compatibility: Fortylock, Fiftylock, Sixtylock, and Eightylock Profile Type: Square profiles as of 40 mm Stop Plate: Extruded aluminium with rubber strip Installation: Quick-Fix system with self-drilling screws Design: Visible thickness of 8 mm, elegant and discreet Adjustability: Adjustable stop plate for 40 mm to 60 mm gate frames, adjustable guide for day bolt The Locinox SFKM surface mounted keep is designed to offer a secure and aesthetically pleasing solution for various types of gates. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, equipped with a rubber strip, enhances the keep's longevity and functionality by reducing wear and noise. Installation is straightforward with the innovative Quick-Fix system, which includes self-drilling screws for a strong and fast setup. The keep is easily adjustable, allowing it to fit gate frames ranging from 40 mm to 60 mm. Additionally, the adjustable guide prevents damage to the day bolt and post, ensuring smooth and reliable operation. The elegant design of the SFKM, with its visible thickness of only 8 mm, ensures that it blends seamlessly with the gate, providing a discreet yet effective locking solution. This keep is perfect for small metal, aluminium, and PVC gates, and its compatibility with various insert locks makes it a versatile choice for enhancing gate security. NOTE: Images may differ from the actual product.

LOCINOX SPKZ QF - Insert keep for square profiles of 40 mm

Locinox SPKZ QF - Insert keep for square profiles of 40 mm Flat keep with polyamide box to integrate into the post. This set allows you to adjust your (ornamental) gates with a minimal gap. SPECIFICATIONS Insert keep for square profiles of 40 mm Innovative Quick-Fix mounting NOTE: Images may differ from actual products

Locinox SAKL QF | Adjustable Stainless Steel Keep | Square or Round Profiles

Product Overview The Locinox SAKL QF is an adjustable stainless steel keep designed for use with square or round gate profiles. This robust keep is suitable for a wide range of gate types, including garden, ornamental, and industrial gates. Featuring a unique Quick-Fix system, the SAKL QF ensures a fast and strong mounting. The adjustable aluminium stop plate with a rubber strip accommodates gate profiles from 40 to 60 mm in width, providing a secure and reliable fit. The design has been refined to make the strike accept the latchbolt more easily, enhancing its functionality. Key Features Stainless steel bolt receiver for durability Extruded aluminium stop plate with rubber strip Easy left or right changing Innovative Quick-Fix mounting for fast installation Adjustable for gate profiles from 40 to 60 mm width Suitable for both rectangular and round profiles Product Description Specifications Material: Stainless steel bolt receiver, aluminium stop plate Mounting: Quick-Fix system Adjustability: Fits gate profiles from 40 to 60 mm width Profile Compatibility: Suitable for rectangular and round profiles Stop Plate: Aluminium with rubber strip The Locinox SAKL QF adjustable keep is designed to provide a secure and reliable solution for a variety of gate types. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, combined with a rubber strip, enhances the keep's ability to securely hold the gate in place while minimizing noise and wear. The innovative Quick-Fix system simplifies the installation process, allowing for a fast and strong mounting without the need for extensive tools or expertise. The SAKL QF is adjustable to fit gate profiles from 40 to 60 mm in width, providing versatility and compatibility with a wide range of gate designs. Additionally, the keep is designed for easy left or right changing, further enhancing its adaptability. This keep is ideal for garden, ornamental, and industrial gates, offering a reliable and aesthetically pleasing solution. The refined design ensures that the strike accepts the latchbolt easily, providing a smooth and secure locking mechanism. NOTE: Images may differ from the actual product.

Locinox 3020-HYB | Cover Shields for Insert Locks | Aluminium, Stainless Steel, Polyamide

Product Overview The Locinox 3020-HYB Cover Shields are designed to provide an aesthetic finish for the handle and cylinder holes of Locinox insert locks. These cover shields are available in three materials: aluminium, stainless steel, and polyamide, allowing you to choose the one that best suits your gate's style and durability requirements. The cover shields come with screws included for easy installation. Key Features Cover shield for handle and cylinder holes Compatible with HWLB for Hybrid locks Available in polyamide, aluminium, and stainless steel Screws included for easy installation Provides an aesthetic finish for insert locks Product Description Specifications Material Options: Polyamide, Aluminium, Stainless Steel Compatibility: Standardised gate pattern, compatible with HWLB for Hybrid locks Includes: Screws for installation The Locinox 3020-HYB Cover Shields are perfect for those looking to enhance the appearance and functionality of their gate locks. These cover shields are designed to fit the handle and cylinder holes of Locinox insert locks, providing a neat and professional finish. The shields are compatible with HWLB for Hybrid locks, ensuring a seamless fit with your existing gate hardware. Available in durable materials such as polyamide, aluminium, and stainless steel, these cover shields offer both aesthetic appeal and robust protection. Whether you prefer the lightweight and corrosion-resistant properties of aluminium, the strength and durability of stainless steel, or the versatile and cost-effective polyamide, the Locinox 3020-HYB has you covered. Installation is straightforward with the included screws, making it easy to upgrade your gate's appearance and functionality. The standardised gate pattern ensures compatibility with a wide range of gate designs, making the Locinox 3020-HYB Cover Shields a versatile and practical choice for any gate. NOTE: Images may differ from the actual product.

Locinox POWERSTONE | 24V-60W Switching Power Supply Unit | High Quality, Plug & Play

Product Overview The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is a high-quality power supply designed for efficient and reliable performance. This unit features a plug & play installation, ensuring a hassle-free setup. The integrated overload indicator adds an extra layer of protection, making it a robust solution for various applications. It can be mounted on a DIN-rail or directly, providing flexibility in installation. Key Features High-quality 60W switching-mode power supply Plug & play installation guaranteed Integrated overload indicator for added protection Mounting options: DIN-rail or direct mounting Auxiliary 24V DC output available Product Description Specifications Input: 110-240 VAC, 50-60Hz, 1.2A maximum Output: +24V DC, 2.5A maximum, 60W Mounting: DIN-rail or direct mounting Overload Indicator: Resettable Auxiliary Output: 24V DC available The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is designed to deliver reliable and efficient power. With an input range of 110-240 VAC and a maximum output of +24V DC at 2.5A, this power supply unit is suitable for a wide range of applications. The integrated overload indicator helps to protect your devices by alerting you to potential overload situations. Installation is made easy with the plug & play design, ensuring a quick and hassle-free setup. The unit can be mounted on a DIN-rail or directly, providing flexibility based on your installation needs. Additionally, the auxiliary 24V DC output is available for powering additional devices, making it a versatile solution for your power needs. The robust construction and high-quality components of the Locinox POWERSTONE ensure long-lasting performance and reliability. Whether for industrial, commercial, or residential applications, this power supply unit is an excellent choice for powering your devices efficiently and safely. NOTE: Images may differ from the actual product.

AES IGATE DUAL EU - 4G GSM gate controller

AES IGATE-DUAL-EU - 4G GSM gate controller AES i-Gate Dual 4G GSM Gate Controller Product ID: IGATE-DUAL-EU The AES i-Gate Dual was introduced in 2026, combining the advanced features of both the IGATE1200 Plus and IGATE Prime into a single, powerful unit. Designed for gate, barrier, and door access control, this 4G GSM controller can store up to 1,280 authorised phone numbers. Registered users simply call the unit to activate the built-in relay, allowing secure, keyless access without answering the call. SPECIFICATIONS Power supply: 12-24V AC/DC IP rated: IP67 Standby current: 45mA Current when called: 200mA Relay load: 24V 2 amps max Relay type: N/C and N/O latching & momentary

LOCINOX TURNITEC TT-FC2 | Fail Close Electromodule | Access Control, Easy Installation

Product Overview The TURNITEC TT-FC2 Fail Close Electromodule is a versatile and reliable solution for controlling incoming and outgoing traffic through turnstiles. This electromechanical module allows operators to manage access control easily, including granting or denying access, changing the rotational direction, and executing precise access control measures. The module is designed to fail close, ensuring the turnstile remains locked during power loss, and is easy to install in a TURNITEC base module or as an expansion on an existing system. Key Features Fail Close electromodule (power loss = locked turnstile) Easy to install in a TURNITEC base module or as an expansion Interchangeable with the mechanical module Suitable for left or right turning turnstiles Locking by powerful electromagnets Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display 100% secure: reset function after 1 full rotation Fitted with a 24V DC power supply for exterior use with integrated timer Encapsulated control module for superior humidity resistance Input voltage: 220V AC Maximum output power: 25W Expandable with TT-COUNTER-LIGHT module for counter and/or signalization Connection by Plug&Play connector Aluminium powder-coated housing with heat dissipation fins Manual release by key always possible Anti-passback security: 60° locking mechanism High quality and guaranteed performance (tested on 1 million movements) Product Description The TURNITEC TT-FC2 Electromodule is designed to enhance access control for turnstiles, providing operators with the ability to control incoming and outgoing traffic effectively. This fail close module ensures that in the event of power loss, the turnstile remains locked, maintaining security. Installation is straightforward, whether in a new TURNITEC base module or as an expansion on an existing system. The module features powerful electromagnets for secure locking and is suitable for both left and right turning turnstiles. Operators can easily control the time range of the switched state via push buttons, with the set time clearly visible on the display. The module is equipped with a 24V DC power supply designed for exterior use, ensuring durability and reliability in various environments. The encapsulated control module provides superior resistance to humidity, enhancing its longevity and performance. For added security, the TT-FC2 includes a reset function that activates after one full rotation of the turnstile, preventing unauthorized access. The aluminium powder-coated housing with heat dissipation fins ensures the module remains cool during operation. The module is also expandable with the TT-COUNTER-LIGHT module for additional functionality, such as counters and signalization. Manual release by key and anti-passback security features further enhance the reliability and safety of this electromechanical module. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-FO2 | Fail Open Electromodule | Access Control, Easy Installation

Product Overview The TURNITEC TT-FO2 Fail Open Electromodule is a versatile and reliable solution for controlling incoming and outgoing traffic through turnstiles. This electromechanical module allows operators to manage access control easily, including granting or denying access, changing the rotational direction, and executing precise access control measures. The module is designed to fail open, ensuring free rotation during power loss, and is easy to install in a TURNITEC base module or as an expansion on an existing system. Key Features Fail Open electromodule (power loss = free rotation) Easy to install in a TURNITEC base module or as an expansion Interchangeable with the mechanical module Suitable for left or right turning turnstiles Locking by powerful electromagnets Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display 100% secure: reset function after 1 full rotation Fitted with a 24V DC power supply for exterior use with integrated timer Encapsulated control module for superior humidity resistance Input voltage: 220V AC Maximum output power: 25W Expandable with TT-COUNTER-LIGHT module for counter and/or signalization Connection by Plug&Play connector Aluminium powder-coated housing with heat dissipation fins Manual release by key always possible Anti-passback security: 60° locking mechanism High quality and guaranteed performance (tested on 1 million movements) Product Description The TURNITEC TT-FO2 Electromodule is designed to enhance access control for turnstiles, providing operators with the ability to control incoming and outgoing traffic effectively. This fail open module ensures that in the event of power loss, the turnstile can rotate freely, maintaining safety and accessibility. Installation is straightforward, whether in a new TURNITEC base module or as an expansion on an existing system. The module features powerful electromagnets for secure locking and is suitable for both left and right turning turnstiles. Operators can easily control the time range of the switched state via push buttons, with the set time clearly visible on the display. The module is equipped with a 24V DC power supply designed for exterior use, ensuring durability and reliability in various environments. The encapsulated control module provides superior resistance to humidity, enhancing its longevity and performance. For added security, the TT-FO2 includes a reset function that activates after one full rotation of the turnstile, preventing unauthorized access. The aluminium powder-coated housing with heat dissipation fins ensures the module remains cool during operation. The module is also expandable with the TT-COUNTER-LIGHT module for additional functionality, such as counters and signalization. Manual release by key and anti-passback security features further enhance the reliability and safety of this electromechanical module. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-CL2 | Counter & Passing Light Signals Module | Plug&Play, Bidirectional

Product Overview The TURNITEC TT-CL2 Counter & Passing Light Signals Module is a Plug&Play solution designed to enhance the functionality of your turnstile by enabling the connection of counters and passing light signals in both turning directions. The counter provides information on the number of people passing through or the number of rotations made by the turnstile, while the passing light signals ensure safe and efficient use of the turnstile. This module is easy to connect with the TT-FO32 and TT-FC32 modules and features a robust aluminium powder-coated housing with heat dissipation fins. Key Features Easy to connect with the TT-FO32 and TT-FC32 modules Controlled by means of included reed contacts Voltage-free changeover contacts (NO&NC) for passing light signal control in both CW and CCW directions (max 250V AC/30V DC, 1A) Voltage-free NO contacts for external counter connection in both rotational directions (max 250V AC/30V DC, 1A) Aluminium powder-coated housing with heat dissipation fins Product Description The TURNITEC TT-CL2 module is designed to provide additional functionality to your turnstile system by enabling the connection of counters and passing light signals. The module features easy connectivity with TT-FO32 and TT-FC32 modules and is controlled by included reed contacts. For both clockwise (CW) and counterclockwise (CCW) directions, the module provides voltage-free changeover contacts for passing light signal control and voltage-free NO contacts for external counter connection. The aluminium powder-coated housing of the TT-CL2 module is designed with heat dissipation fins, ensuring durability and efficient operation in various environments. This robust construction makes the module suitable for high-traffic areas where reliable performance is essential. The TT-CL2 module enhances the functionality and safety of your turnstile system, providing accurate counting and clear passing signals for efficient access control. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SDM4 | Hydraulic Damper for 4-Arm Turnstile (90°) | Progressive Damping

Product Overview The TURNITEC TT-SDM4 is a unique hydraulic damper designed specifically for 4-arm (90°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-SDM4 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system for 4-arm TURNITEC (90°) Continuous and progressive damping of the rotational movement Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-SDM4 Hydraulic Damper is designed to enhance the performance and safety of 4-arm (90°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, providing smooth and gradual movements and preventing the turnstile from hitting users' heels. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-SDM4 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-SDM4 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-DM3 | Hydraulic Damper for 3-Arm Turnstile (120°) | Progressive Damping

Product Overview The TURNITEC TT-DM3 is a unique hydraulic damper designed specifically for 3-arm (120°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-DM3 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system Continuous and progressive damping starting from 60° in the 3-arm version Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-DM3 Hydraulic Damper is designed to enhance the performance and safety of 3-arm (120°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, starting from 60° of rotation. This design allows for smooth and gradual movements, preventing the turnstile from hitting users' heels and ensuring a more comfortable passage. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-DM3 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-DM3 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SM4S | Base Mechanism for 4-Arm Turnstile (90°) | Modular, Rustproof

Product Overview The TT-SM4S TURNITEC Base Mechanism is a high-quality, modular solution for operating 4-arm (90°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-SM4S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-SM4S TURNITEC Base Mechanism offers a robust and flexible solution for 4-arm (90°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-SM4S is a practical choice for both new installations and upgrades. Installing the TT-SM4S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-SM4S a versatile and adaptable solution. Constructed from rustproof materials, the TT-SM4S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-SM4S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX TT-BM3S | TURNITEC Base Mechanism for 3-Arm Turnstile (120°)

Product Overview The TT-BM3S TURNITEC Base Mechanism is a high-quality, modular solution for operating 3-arm (120°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-BM3S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-BM3S TURNITEC Base Mechanism offers a robust and flexible solution for 3-arm (120°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-BM3S is a practical choice for both new installations and upgrades.   Specifications Materials: Rustproof construction for enhanced durability Mounting: Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm Protection: IP55 housing protects the mechanism against environmental factors Modularity: Expandable with mechanical and electromechanical locking modules and hydraulic damper Performance: Tested for 1 million movements to ensure reliability Installation and Usage Installing the TT-BM3S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-BM3S a versatile and adaptable solution. Durability and Protection Constructed from rustproof materials, the TT-BM3S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-BM3S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC | Modular (Electro)Mechanical Control Unit for Turnstiles

Product Overview The TURNITEC Modular (Electro)Mechanical Control Unit is designed to provide a high-quality, maintenance-free turnstile solution that can be customized to match the design of your fencing. Available in both 3-arm (120°) and 4-arm (90°) configurations, the TURNITEC mechanism is applicable to any turnstile and ensures quick installation. Its 100% modular design allows for easy adaptation to meet specific customer requirements. Optional features include a damping system for smooth operation and interchangeable left/right mechanical or electromechanical modules for fail open or fail close functionality. Key Features 100% modular system: customizable and expandable Available for 3-arm (120°) and 4-arm (90°) turnstiles Optional interchangeable left/right mechanical or electromechanical modules (Fail Open or Fail Close) Automatic return to starting position after every passage Anti-passback security: locks after a 60° or 45° rotation to prevent simultaneous passage of two persons Robust connection with the turnstile via a 34 mm diameter spline axle (length 325 mm) Manufactured from rust-proof materials (stainless steel and aluminium) Optional damping system for smooth and gradual movements, unaffected by temperature changes Adjustable signal duration IP55 housing protects the mechanism against water, dirt, wind, dust, and vermin Product Description The TURNITEC control unit is designed for flexibility and durability, ensuring a maintenance-free solution for turnstile applications. Its modular nature allows for easy customization and expansion, catering to specific needs and preferences. The optional damping system ensures smooth operation, while the robust construction from rust-proof materials guarantees long-term reliability. The IP55-rated housing protects the mechanism from environmental factors, making it suitable for both indoor and outdoor use. Specifications Modularity: 100% modular system, expandable as needed Configurations: Available for 3-arm (120°) and 4-arm (90°) turnstiles Modules: Optional fail open and fail close electromechanical modules Operation: Automatic return to starting position, anti-passback security Connection: 34 mm diameter spline axle, length 325 mm Materials: Rust-proof stainless steel and aluminium Damping System: Optional, provides smooth movement unaffected by temperature Signal Duration: Adjustable Protection: IP55 housing Installation and Usage Installing the TURNITEC control unit is straightforward, thanks to its modular design and quick installation features. The unit can be configured with either 3-arm or 4-arm turnstiles and offers optional mechanical or electromechanical modules for fail open or fail close functionality. The anti-passback security feature ensures that only one person can pass through the turnstile at a time, enhancing security. The optional damping system provides smooth and controlled movements, unaffected by temperature changes. Durability and Protection The TURNITEC control unit is constructed from high-quality rust-proof materials, including stainless steel and aluminium, ensuring long-lasting durability. The IP55-rated housing protects the mechanism from water, dirt, wind, dust, and vermin, making it suitable for harsh environmental conditions. The robust design and reliable performance make the TURNITEC control unit an excellent choice for high-traffic areas requiring secure and efficient access control. Product Guide Product CodeTurnstileDamperFail Open ElectromoduleFail Close ElectromoduleCounter & Passing Light Signals Module TTEC-BMS-FO2-FC2-DM-CL2 3-arm turnstile (120°) Yes 1x 1x Yes TTEC-BMS-FC2-FC2-DM-ZCL 3-arm turnstile (120°) Yes / 2x / TTEC-BMS-FO2-FC2-DM-ZCL 3-arm turnstile (120°) Yes 1x 1x / TTEC-BMS-FO2-FO2-DM-ZCL 3-arm turnstile (120°) Yes 2x / / TTEC-SMS-FO2-FC2-SDM-CL2 4-arm turnstile (90°) Yes 1x 1x Yes TTEC-SMS-FC2-FC2-SDM-ZCL 4-arm turnstile (90°) Yes / 2x / TTEC-SMS-FO2-FC2-SDM-ZCL 4-arm turnstile (90°) Yes 1x 1x / TTEC-SMS-FO2-FO2-SDM-ZCL 4-arm turnstile (90°) Yes 2x / / NOTE: Images may differ from the actual product.

LOCINOX DC-ACCESS-12V-20W All-in one 12V DC Access Module with integrated timer

DC-ACCESS-12V-20W All-in one 12V DC Access Module with integrated timer All-in-one, Plug & Play Access Module (220V AC input). Including power supply and integrated timer with easy to read display and easy to operate: time range (1 to 99s) of switched state controlled by push buttons. A 12V DC Fail Open or Fail Close device can be easily connected to the module. SPECIFICATIONS Mounting on DIN-rail or directly Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display Robust control module: encapsulated for superior humidity resistance Input voltage: 220V AC / Maximum Output power: 20W Connection between module and power supply by means of Plug&Play connector Designed with heat-dissipation fins at the back Aluminium powder coated  

LOCINOX MAGUNIT-2500 | Magnet and Anchor Plate for N-LINE Profiles | 250kg Holding Force

Product Overview The MAGUNIT-2500 is a magnet and anchor plate set designed for use with N-LINE-B-MAG and N-LINE-S-MAG profiles. This set includes all necessary fittings to combine with these profiles, and multiple MAGUNITs can be mounted within the N-LINE profile. The MAGUNIT-2500 offers a guaranteed holding force of 250 kg, making it a reliable and robust solution for securing gates and other applications. Its special two-layer protective coating and 500-hour salt spray resistance ensure durability in outdoor environments. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Minimal pulling force: 2500N (250 kg) Product Description The MAGUNIT-2500 magnet and anchor plate set is an essential component for enhancing the security of gates and other applications using N-LINE-B-MAG and N-LINE-S-MAG profiles. Its robust construction ensures a reliable holding force of 250 kg, tested on every magnetic lock for guaranteed performance. The set's special two-layer protective coating and SGS-certified salt spray resistance make it suitable for harsh outdoor environments, ensuring long-lasting durability and functionality. Specifications Holding Force: 250 kg (2500N) Salt Spray Resistance: 500h, SGS certified (ISO 9227) Coating: Special two-layer protective coating for outdoor use Anti-Residual Magnetism: Kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Installation and Usage Installing the MAGUNIT-2500 is straightforward, with all necessary fittings included for easy combination with N-LINE-B-MAG and N-LINE-S-MAG profiles. Multiple MAGUNITs can be mounted within the N-LINE profile, providing flexible and scalable security solutions. The magnet operates efficiently on both 12V and 24V DC power sources, with a current draw of 460mA at 12V or 230mA at 24V. The anti-residual magnetism kick-off system ensures the lock does not retain magnetic force after disengagement, enhancing security and reliability. Durability and Protection The MAGUNIT-2500 is built to withstand challenging outdoor conditions, featuring a special two-layer protective coating that offers superior resistance to corrosion and wear. Its 500-hour salt spray resistance, certified by SGS (ISO 9227), guarantees performance in environments exposed to moisture and salt. This durability ensures the MAGUNIT-2500 remains reliable over time, making it a dependable choice for securing gates and other applications requiring robust magnetic locks.

LOCINOX INTRALEC | Built-In Electric Keep for Insert Locks | 12V-24V AC/DC

Product Overview The INTRALEC is an elegant and discreet built-in electric keep designed for insert locks. Its sleek design allows it to be seamlessly integrated into the post, providing a secure yet unobtrusive solution for access control. The patented Click-It system ensures fast and easy installation without the need for a strike plate, and a mechanical override is also possible. The INTRALEC is available in Fail Open (Ruptura) and Fail Close (Emissa) versions, catering to various security requirements. Key Features Tested up to 500,000 movements Fast and easy fixing with Click-It system Resistance to pressure on the latch bolt: 300 kg Deep closure of 17.5 mm of the latch bolt Easy left or right changing Corrosion-resistant black anodized aluminum housing Available for profiles with 40 mm and 50 mm depth Voltage: 12V-24V AC/DC Consumption: 10W / 12V - 0.8A / 24V - 0.4A Product Description The INTRALEC built-in electric keep offers a secure and durable solution for gates equipped with insert locks. Its elegant design allows it to blend seamlessly into the gate post, providing unobtrusive security. The keep is robustly tested to withstand up to 500,000 movements, ensuring long-lasting reliability. The Click-It system simplifies installation, while the deep closure and high pressure resistance provide enhanced security. Installation and Usage Installing the INTRALEC is straightforward with the patented Click-It system, which eliminates the need for additional strike plates. This keep is designed for easy left or right changing, making it versatile for various installations. It operates on a wide voltage range of 12V-24V AC/DC, and its low power consumption ensures efficiency. The mechanical override feature adds an extra layer of security, making it suitable for high-security applications. Durability and Protection The INTRALEC electric keep is constructed from corrosion-resistant black anodized aluminum, ensuring it remains durable and functional in harsh environments. Its resistance to pressure on the latch bolt up to 300 kg makes it a reliable choice for securing gates. Available for profiles with 40 mm and 50 mm depth, this keep is versatile and adaptable to different gate designs. With its elegant design and robust features, the INTRALEC offers both aesthetics and security.

LOCINOX MODULEC-SF | Surface Mounted Electric Strike | Forty, Fifty, Sixtylock

Product Overview The MODULEC-SF is a surface mounted electric strike designed for use with Forty, Fifty, and Sixtylock insert locks. This electric strike features a narrowed stop plate, making it ideal for various gate profiles. Its quick and easy installation is ensured by the patented Quick-Fix system, eliminating the need for drilling or laser-cutting the gate profile. The black anodized housing provides corrosion and scratch resistance, ensuring long-lasting durability. The MODULEC-SF is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), and can be connected to both 12V-24V AC/DC. Key Features Tested up to 500,000 movements Fast and easy fixing with Quick-Fix Resistance to pressure on the latch bolt: 300 kg Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm width Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Available in two colours: RAL 9005 & ALUM Product Description The MODULEC-SF surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Installation and Usage Installing the MODULEC-SF is straightforward with the Quick-Fix system, allowing for rapid and secure attachment to gate profiles. The electric strike is designed for easy left or right changing, providing flexibility in installation. Compatible with both 12V and 24V AC/DC power supplies, the MODULEC-SF is versatile and adaptable to different power setups. The adjustable gate profile width of 40-60 mm ensures compatibility with a range of gate designs. Durability and Protection The MODULEC-SF electric strike is built to withstand rigorous use, tested up to 500,000 movements. Its robust construction includes a black anodized aluminum housing that resists corrosion and scratching, ensuring longevity and reliability. The strike's resistance to 300 kg of pressure on the latch bolt provides added security, making it an excellent choice for high-security applications. Available in RAL 9005 and ALUM colors, the MODULEC-SF combines functionality with aesthetic versatility.

LOCINOX MODULEC-SH | Surface Mounted Electric Security Keep | 12V-24V AC/DC

Product Overview The MODULEC-SH is a surface mounted electric security keep designed to replace your SHKL keep with enhanced security features. It offers Fail Close and Fail Open functionalities, making it versatile for various security needs. Easy to install with the patented Quick-Fix system, this keep is suitable for 12V-24V AC/DC applications. The MODULEC-SH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), ensuring reliable performance in different scenarios. Key Features Tested up to 500,000 movements Resistance to pressure on the latch bolt: 300 kg Easy mounting with Quick-Fix Same drilling pattern as SA, SH, and SM keeps Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm depth Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Product Description Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Overview The MODULEC-SH electric security keep offers robust performance and enhanced security for various access control needs. Its ability to withstand a pressure resistance of 300 kg on the latch bolt ensures high durability and reliability. Available in both Fail Close (Emissa) and Fail Open (Ruptura) versions, the MODULEC-SH can be tailored to meet specific security requirements. The corrosion-resistant black anodized aluminum housing and easy left or right changing feature add to its versatility, making it suitable for a wide range of gate profiles. Installation and Usage Installing the MODULEC-SH is straightforward with the Quick-Fix system, designed for easy mounting on new or existing gates. The keep is compatible with gate profiles of 40-60 mm depth and follows the same drilling pattern as SA, SH, and SM keeps, ensuring a seamless replacement. The MODULEC-SH operates on 12V-24V AC/DC with a power consumption of 15W, making it energy efficient and effective for various applications. With its high durability and resistance to environmental factors, the MODULEC-SH is ideal for both indoor and outdoor use. Durability and Protection The MODULEC-SH is built to withstand harsh conditions with its corrosion-resistant black anodized aluminum housing. It has been tested for up to 500,000 movements, ensuring long-term reliability and performance. The keep's ability to withstand a pressure resistance of 300 kg on the latch bolt provides robust security, making it an excellent choice for high-security applications. Additionally, the Fail Close and Fail Open functionalities ensure the keep meets diverse security needs, providing flexibility and peace of mind.

LOCINOX SEH | Electric Strike for Insert Locks | 500kg Pulling Force

Product Overview The SEH Electric Strike is designed for use with H-Metal and H-Wood insert locks, providing a robust and reliable solution for access control. Equipped with a blocking system that withstands a pulling force of up to 500 kg, this electric strike ensures maximum security. The SEH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Its water-resistant and weatherproof design guarantees durability in different environmental conditions. Key Features Available in two versions: Emissa (Fail Close) and Ruptura (Fail Open) Easy left or right changing Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current for Emissa: 1A Current for Ruptura: 1.5A Water-resistant and weatherproof Pressure resistance on self-latching bolt: 500 kg Product Description The SEH Electric Strike is a highly durable and secure solution for access control in various settings. Its ability to withstand a pulling force of 500 kg makes it exceptionally strong and reliable. Available in both Fail Close and Fail Open versions, the SEH electric strike can be tailored to meet specific security requirements. The easy left or right changing feature enhances its versatility, while its compatibility with post profiles of 50 mm and more ensures broad applicability. Installation and Usage Installing the SEH electric strike is straightforward, thanks to its design for easy left or right changing. The strike is compatible with H-Metal and H-Wood insert locks, making it suitable for a variety of applications. It operates on 12V AC/DC, with the Emissa version requiring 1A and the Ruptura version requiring 1.5A. The water-resistant and weatherproof construction ensures reliable performance in various environmental conditions, making it ideal for both indoor and outdoor use. Durability and Protection The SEH electric strike is built to withstand harsh conditions, with a water-resistant and weatherproof design that ensures long-term durability. Its anodized aluminium housing protects against vandalism and environmental damage, while the stainless steel push buttons are designed to endure frequent use. The strike's ability to withstand a 500 kg pulling force provides robust security, making it an excellent choice for high-security applications.

LOCINOX INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit)

INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit) The invisible Interio gate closer, with matching hinge set, is completely built into the gate frame. This highly aesthetic solution opens and closes the gate comfortably. The integrated pre-tension ensures an efficient and flawless installation where speed and final snap can be adjusted accurately to fit any need. A constant closing speed is guaranteed in all weather conditions, without any adjustments needed. Interio is perfectly suited for both left and right turning gates. Is available on it's own or with ground or wall mounting kit.   SPECIFICATIONS Self-closing up to 125° (depending on the situation) with adjustable closing speed and final snap Powder coated aluminium housing Constant closing speed in hot or cold weather Vandal-proof For left & right turning gates Available for 50 and 60 mm profiles with max 2 mm thickness Secure, fast and easy attachment thanks to Quick-Fix mounting bolts Optional sets available for ground and wall installation Recommended with Gatestop Easy to open: Max. 20 Nm DRAWING

LOCINOX PUSHBAR Aluminium Push Bar | 1400mm Length | Easy Gate Exit

Product Overview The Aluminium PUSHBAR is designed to facilitate easy opening and free exit of a gate with a simple push. This 1400mm length push bar replaces the standard handle, operates the daybolt, and can be quickly installed on new or existing Locinox surface-mounted gate locks (LA, LP, and LF chassis - PUSHBAR-L-1400) or hybrid insert locks (PUSHBAR-H-1400). The PUSHBAR is versatile and can be shortened to fit any gate. Key Features Black powder-coated aluminium push bar with stainless steel mechanism Available in 1400mm length, can be shortened to fit any gate Easy installation with Quick-Fix Compatible with Locinox surface-mounted gate locks (LA, LP, LF) and hybrid insert locks (H-Metal, H-Wood, Sixtylock) Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Suitable for left and right turning gates Product Description The PUSHBAR aluminium push bar is an excellent solution for ensuring a quick and simple gate exit. Its 1400mm length offers flexibility as it can be shortened to fit any gate size. The black powder-coated aluminium finish with a stainless steel mechanism ensures durability and a sleek appearance. The PUSHBAR is compatible with a wide range of Locinox gate locks, making it a versatile addition to any gate setup. Specifications (PUSHBAR-L-1400) Black powder-coated aluminium push bar with stainless steel mechanism For left and right turning gates Easy to install on the gate with Quick-Fix Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Specifications (PUSHBAR-H-1400) Black powder-coated aluminium push bar with stainless steel mechanism Only compatible with H-Metal, H-Wood, and Sixtylock Easy & fast mounting: Quick-Fix For left and right turning gates Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Installation and Usage Installing the PUSHBAR is straightforward with the Quick-Fix system, allowing for easy mounting on both new and existing gates. The push bar is suitable for left and right turning gates, providing flexibility in installation. The blinded 8 mm follower ensures a secure fit, and the push bar can be combined with half handle sets with an 8 mm follower for enhanced functionality. Durability and Protection The black powder-coated aluminium construction of the PUSHBAR ensures resistance to weather and wear, making it suitable for outdoor use. The stainless steel mechanism adds to its durability, ensuring long-lasting performance. This robust design guarantees reliable operation and easy gate access for years to come.

NICE BiDi-Shutter | Interior Bidirectional Interface for Tubular Motors

 Product Overview The BiDi-Shutter is an advanced bidirectional interface designed for integrating mechanical tubular motors of interior shutters and outdoor awnings into your smart home system. This interface allows for individual, group, or scenario control of connected motors, providing real-time feedback on automation status and efficient energy management to reduce waste. The BiDi-Shutter enhances comfort by protecting indoor environments from excessive sunlight and reducing the need for air conditioning. Key Features Control connected motors individually, in groups, or in scenarios Receive real-time feedback on automation status Manage electrical loads and reduce energy waste Voice control via Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment using Yubii or MyNice apps Enhance indoor comfort by protecting against heat and reducing air conditioning use Fast programming of limit switches and continuous automatic calibration Set two intermediate opening positions based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors No gateway required for controlling Venetian blinds, rolling shutters, and awnings Each bidirectional product acts as a radio signal repeater to extend signal coverage Product Description Smart Home Integration BiDi-Shutter allows seamless integration of tubular motors into your smart home system, enabling comprehensive control and management. You can control the connected motors using voice commands through Amazon Alexa, Google Home, or Siri Shortcuts. Additionally, the Yubii and MyNice apps provide remote management capabilities via your smartphone, smartwatch, or car infotainment system. Energy Efficiency and Comfort By managing electrical loads and controlling consumption, BiDi-Shutter helps reduce energy waste. It also protects your indoor environment from excessive heat, making the climate more comfortable and minimizing the need for air conditioning. This contributes to energy savings and enhances overall comfort. Easy Programming and Compatibility Programming the limit switches is fast and straightforward, requiring just two complete maneuvers. The system ensures continuous automatic calibration during operation. You can set two intermediate opening positions based on sun sensor settings, allowing for optimal sunlight control. BiDi-Shutter is compatible with both unidirectional and bidirectional remote controls and climate sensors, offering flexibility in control options. Reliable and Efficient Each bidirectional product in the BiDi-Shutter system acts as a radio signal repeater, extending signal coverage and ensuring reliable operation. This makes the system efficient and effective in controlling various types of window coverings, including Venetian blinds, rolling shutters, and awnings, without the need for a separate gateway. Usage Instructions Install the BiDi-Shutter interface according to the provided manual. Pair the interface with your smart home system and configure the settings using the Yubii or MyNice apps. Set the desired opening positions and control the tubular motors using voice commands or remote controls. Regularly check the system for updates and ensure all components are functioning correctly. Dimensions Compact and designed for easy installation, the BiDi-Shutter interface fits seamlessly into your existing smart home setup. Safety and Maintenance Ensure the BiDi-Shutter interface is installed in a suitable location, protected from moisture and excessive heat. Regularly check for firmware updates to maintain optimal performance. Keep the interface and connected devices clean and free from obstructions.

PROCON ELECTRONICS MD360 Wireless Magnetic Field Vehicle Detector | Controller and Puck | 433MHz

Product Overview The MD360 Wireless Magnetic Field Vehicle Detector is a sophisticated solution designed for parking and access control applications. This system includes a 433MHz wireless magnetic field vehicle detector puck (MD360P) and controller (MD360C), providing a cost-effective and efficient method for detecting vehicles to facilitate the automatic opening of security gates. With minimal road surface cutting required for installation, the MD360 series ensures a hassle-free setup. Key Features Wireless connectivity with up to 50 meters range (Line of Sight) Up to 5 years battery life for the puck at 25℃ (Calculated at 1 detection per minute) Easy pairing of puck to controller (Note: Only one puck can be paired to a controller at one time) 1.5m sensing range for the puck (Optimal detection achieved when mounted as close to the vehicle path as possible) Power supply: 12 - 24VAC/DC 50/60Hz Relay Mode: Configure the relay to operate in presence or pulse mode Pulse Relay Selection: Configure relay to pulse on vehicle detect or undetect Product Description Models CodeDescription MD360C Controller for MD360 Wireless Magnetic Field Vehicle Detector MD360P Puck for MD360 Wireless Magnetic Field Vehicle Detector Technical Specifications SpecificationDetails Frequency 433MHz Wireless Range Up to 50 meters (Line of Sight) Battery Life Up to 5 years at 25℃ (1 detect per minute) Sensing Range 1.5 meters Power Supply 12 - 24VAC/DC 50/60Hz Relay Mode Presence or Pulse Pulse Relay Selection Vehicle detect or undetect Usage Instructions To install the MD360 vehicle detector, follow the provided instructions for minimal road surface cutting. Place the puck as close to the vehicle path as possible for optimal detection. Pair the puck with the controller easily, ensuring only one puck is paired at a time. Configure the relay mode and pulse relay selection according to your requirements for efficient vehicle detection and gate operation. Dimensions Compact design for easy installation and seamless integration with existing access control systems. Safety and Maintenance Ensure the detector puck and controller are installed in a suitable location free from obstructions. Regularly check the battery life and replace as needed to maintain optimal performance. The robust design of the MD360 series ensures long-lasting durability in various environmental conditions.

KEY AUTOMATION DYL Programming module (only 14A board)

DYL Programming module (only 14A board) Cable length 120 cm  

KEY AUTOMATION KUBE PRO Module | Smartphone Programming | Bluetooth 4.2 LE

Product Overview The KUBE PRO module is a professional-grade tool designed for configuring doors and gates directly from a smartphone. Tailored for professional installers, the KUBE PRO module simplifies the setup and management of automation systems with its dedicated app. It features the KEY CLOUD service for viewing and backing up data, managing your team, and planning scheduled maintenance. Key Features App designed for professional installers for configuring doors and gates KEY CLOUD service for data backup, team management, and maintenance planning Compatible with 14A control unit from 3.0 FW version, HALO, and CT10324-CT20324 control units from 2.0 FW version Wireless Bluetooth technology 4.2 LE Easy and fast configuration App native for Android 5.0/iOS 9.3.5 or superior with multilingual support Compatible with smartphones equipped with Bluetooth 4.0 LE Product Description Models CodeDescription KUBE Module for automation control from smartphone, for 14A, HALO, CT10324, and CT20324 KUBEPRO Module for smartphone programming, for 14A, HALO, CT10324, and CT20324 Technical Specifications SpecificationDetails Wireless Technology Bluetooth 4.2 LE App Compatibility Android 5.0/iOS 9.3.5 or superior Control Unit Compatibility 14A from 3.0 FW, HALO, CT10324, CT20324 from 2.0 FW Smartphone Compatibility Android and Apple devices with Bluetooth 4.0 LE Usage Instructions The KUBE PRO module is designed for easy installation and configuration. Follow the instructions provided in the app to pair your smartphone with the KUBE PRO module. Once paired, you can configure doors and gates, manage team access, and plan maintenance schedules effortlessly through the app. Ensure your control units are compatible and updated to the required firmware versions. Dimensions Compact design for easy integration with your existing automation system.

KEY AUTOMATION KUBE Module | Automation Control from Smartphone | Bluetooth 4.2 LE

Product Overview The KUBE module is a cutting-edge solution for automation control directly from your smartphone. Designed with the end customer in mind, the KUBE module allows for easy and intuitive control of gates, garden lights, and user access management through a dedicated app. This app synchronizes the status of your automation system with the Cloud and the Kube Pro installer app, ensuring seamless operation and monitoring. Key Features Control gates and garden lights from your smartphone Manage other users’ access from the main smartphone Synchronization with Cloud and Kube Pro installer app Compatible with 14A control unit from 3.0 FW version, HALO and CT10324-CT20324 control units from 2.0 FW version Wireless Bluetooth technology 4.2 LE Easy and fast configuration App native for Android 5.0/iOS 9.3.5 or superior with multilingual support Compatible with smartphones equipped with Bluetooth 4.0 LE Product Description Models CodeDescription KUBE Module for automation control from smartphone, for 14A, HALO, CT10324, and CT20324 KUBEPRO Module for smartphone programming, for 14A, HALO, CT10324, and CT20324 Technical Specifications SpecificationDetails Wireless Technology Bluetooth 4.2 LE App Compatibility Android 5.0/iOS 9.3.5 or superior Control Unit Compatibility 14A from 3.0 FW, HALO, CT10324, CT20324 from 2.0 FW Smartphone Compatibility Android and Apple devices with Bluetooth 4.0 LE Usage Instructions The KUBE module is designed for easy installation and configuration. Follow the instructions provided in the app to pair your smartphone with the KUBE module. Once paired, you can control your gates, garden lights, and manage user access effortlessly through the app. Ensure your control units are compatible and updated to the required firmware versions. Dimensions Compact design for easy integration with your existing automation system.

KEY AUTOMATION EGO Columns EG50, EG100 | Photocells and Selectors | LED Lights

Product Overview The EGO Columns for photocells and selectors are designed to provide reliable and efficient lighting solutions for large areas. Made entirely of aluminum and available in heights of 500 mm and 1000 mm, these columns feature replaceable LED lights to ensure long-lasting performance. The integrated LED lights enhance visibility and security, making them ideal for various applications. Key Features LED lights to illuminate large areas Constructed entirely of aluminum Available heights: 500 mm, 1000 mm Replaceable LED lights Product Description Specifications SpecificationDetails Voltage 24-35 Vdc Color Rendering Index (CRI) >90 Color Temperature 3000K Luminous Flux 450lm - 900lm Protection Degree IP54 Models CodeDescription EG50 Support post h. 50 cm EG50L Support post h. 50 cm with integrated LED light (5W LED) EG100 Support post h. 100 cm EG100L Support post h. 100 cm with integrated LED light (10W LED) EG100A Support post h. 100 cm with accessory housing EG100LA Support post h. 100 cm with integrated LED light (10W LED) and accessory housing Additional Components CTLIGHT2: Voltage regulator for LED lights 24 Vdc, max 30W (mandatory for all control units except BOXLED control units) Dimensions Height: 500 mm or 1000 mm Usage Limits The performance values can be affected by environmental conditions and the installation setup.

DEA Ghost Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216 is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216 Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.

DEA Ghost 100 Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216GN is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216GN Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216GN. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.  

DEA BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws

BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws Fixing plate for LIVI/N batteries with screws. More information in downloads.    

DEA 460N V2 Adjustable fixing plate for LIVI/N

460N V2 Adjustable fixing plate for LIVI/N This is a adjustable fixing plate for LIVI/N operator. Check downloads for more useful information.  

DEA 451 External unlocking device with cable for REV (4.5m) - use with BLINDOS

451 External unlocking device with cable for REV (4.5m) - use with BLINDOS External unlocking device with cable for REV (4.5m).To be used with BLINDOS. More info in downloads.  

DEA BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable

BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable This BLINDOS PACK is a combination of BLINDOS and one of the following products: 450N, 451, GEKO/SF, 580M. All parts are available separately as well.  

DEA Galvanized Pinion for REV and GULLIVER Operators (M6, Z18/IB, Z22, Z15/IB)

Product Overview These high-quality galvanized pinions are designed for use with REV and GULLIVER operators. They ensure reliable performance and durability, making them ideal for various gate automation needs. Available in multiple sizes, these pinions are essential components for maintaining the smooth operation of your gate systems. Key Features Durable galvanized construction for long-lasting use Compatible with REV and GULLIVER operators Available in multiple sizes to suit different applications Ensures smooth and reliable gate operation Product Description The galvanized pinions for REV and GULLIVER operators are crafted to provide exceptional durability and performance. The robust construction ensures that they can withstand the demands of intensive gate operations. These pinions come in various sizes, allowing you to choose the perfect fit for your specific needs. The pinions are easy to install and help maintain the smooth functioning of your gate automation systems. Each pinion is designed to work seamlessly with REV and GULLIVER operators, ensuring compatibility and reliable performance. The galvanized finish offers excellent resistance to corrosion, enhancing the longevity of the pinions even in harsh weather conditions. Product Guide Product CodeProductSizeDescription 619090 PIGNONE Z22 REV Z=22 Oversized pinion Z=22 for REV 360674 PIGNONE Z15/IB REV M=4 Z=15 Øe=68 Galvanized pinion for IRONBOX M=4 Z=15 Øe=68 (REV/RF) 360673 PIGNONE Z18/IB REV M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 REV 360580 M6 M=6 Z=12 Øe=84 M=6 Z=12 Øe=84 GULLIVER galvanized gear 360412 PIGNONE Z18/IB GULLIVER M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 GULLIVER Note: When using an oversized pinion Z22, the maximum weight of the leaf should be reduced by 30%. Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA IRONBOX Vandal-proof Box for REV and GULLIVER with Magnetic Limit Switch and Foundation Plate (IRONBOX, IRONBOX/XS)

Product Overview The IRONBOX and IRONBOX/XS vandal-proof boxes are designed to protect sliding gate motors and their electronic components. Suitable for collective sliding gates (REV in the IB version) and industrial sliding gates (GULLIVER in the IB version), these boxes offer robust protection and an elegant design. The IRONBOX/XS is compact, making it ideal for installations with limited space or requiring a specific design aesthetic. Key Features Vandal-proof design made of steel Equipped with a magnetic limit switch for precise stopping Customized access key for added security Spacious interior for easy installation and maintenance Essential design for clean and tidy installations Product Description The IRONBOX series offers unparalleled protection for your gate automation systems. Made from painted steel, these boxes are designed to prevent tampering and vandalism, ensuring that your motors and electronic components remain safe. The customized access key adds an extra layer of security, making unauthorized access nearly impossible. Both IRONBOX and IRONBOX/XS come with a magnetic limit switch, which ensures accurate stopping during both opening and closing operations. The larger IRONBOX model provides ample working space for complex installations and maintenance, while the IRONBOX/XS is tailored for simpler installations with its compact size of only 36 cm wide, 60 cm high, and 22 cm deep. Installation is straightforward, with a significant working area in the IRONBOX and adequate room in the IRONBOX/XS for professional maneuvering during setup and maintenance. Both models include an internal fixing plate for organizing the control panel and electronic devices, ensuring a practical, fast, and orderly setup. Product Guide Product CodeProductDescription 619080 IRONBOX RAL 9006 painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 594 x 1002 x 280 mm (without pinion). 619100 IRONBOX/XS Painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 359 x 607 x 219 mm (without pinion). Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator Magnetic limit switch for IB version of Gulliver or REV operator  

DEA NET-BOX - The Device for Management of Your Remotes from Your Office (Radio Controls)

Product Overview The NET-BOX is the ultimate bench programmer designed to read, clone, and customize remote controls and control units for gates quickly and accurately. This device streamlines the management of your remote controls, making it a fast and error-proof operation, all from the convenience of your office. Key Features Create and activate pre-recorded virtual remote controls in the memory of the control unit or receiver Increase the security of remote controls by setting a customized encryption key Read the features of a DEA remote control and transfer them to a new one Clone the features of a remote control in series for fixed code transmission systems Replace a stolen or lost remote control safely by creating a new one that eliminates the old one Program DE@NET control units conveniently on the bench by transferring preset data from DEAcloud Product Description The NET-BOX offers a comprehensive solution for managing remote controls for gate automation systems. With its advanced features, you can easily create and activate virtual remote controls, ensuring they are securely stored in the memory of your control units or receivers. Enhance the security of your system by setting customized encryption keys for your remote controls. The NET-BOX makes it simple to read the features of an existing DEA remote control and transfer them to a new one, or clone these features in series for systems using fixed code transmission. In case of a lost or stolen remote, the NET-BOX allows you to generate a new remote that invalidates the old one, providing peace of mind and maintaining security. Additionally, the NET-BOX facilitates the programming of DE@NET control units by transferring data from DEAcloud directly to the control unit, simplifying the setup process for new installations. Note Each NET-BOX device includes 1 pc GT-CABLE for easy connection and setup. Product Guide Product CodeProductDescription NET-BOX Device Device for management, cloning, and customization of remote controls and control units. Includes 1 pc GT-CABLE. Accessories GT-CABLE DEAcloud Subscription Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-COM - Device for Installation, Maintenance, Remote Management, and Diagnostics

Product Overview The NET-COM device is designed for the installation, maintenance, remote management, and diagnostics of automation systems. Located inside the installation, NET-COM allows for advanced remote control and management of DE@NET control boards, making it a powerful tool for automation professionals. Key Features Remote control and management of DE@NET control boards Check system functionality and read/modify installation parameters Consult the event register recorded by the control board Manage up to 1,500 remote controls Set programmed automatic opening and closing times with an annual calendar Open the gate telephonically (after enabling) Compatible with any brand of control boards Smartphone access via DEAuser app Product Description The NET-COM device is an essential tool for automation professionals, allowing for the remote management and diagnostics of DE@NET control boards. With NET-COM, you can manage installations from the office, ensuring the correct functioning of the system, reading and modifying installation parameters, and consulting the event register recorded by the control board. NET-COM acts as an interactive receiver that monitors and manages accesses. It can handle up to 1,500 remote controls, allowing you to select time slots and consult the access register. You can also set programmed automatic opening and closing times with an annual calendar and open the gate telephonically after enabling this feature. One of the standout features of NET-COM is its compatibility with any brand of control boards, allowing you to take full advantage of all receiver features. Additionally, with the DEAuser app, you can control the gate with your smartphone, eliminating the need for keys or access codes. If you have installed NET-COM with a data SIM card, you can even check the status of the automation remotely, fine-tune the automatic opening and closing times, and check the access register via remote control. The NET-COM/S version includes a DEA SIM card with prepaid connectivity service for 5 years, providing an all-in-one solution for remote management and diagnostics. Attention GSM remote connectivity is available only in European countries that support 2G technology. Supplied without a SIM (M2M). Possibility of using a SIM supplied by other operators. Product Guide Product CodeProductDescription NET-COM Device Device for installation, maintenance, remote management, and diagnostics of automation systems. NET-COM/S Device with SIM Includes DEA SIM card with prepaid connectivity service for 5 years. Accessories DEA SIM Card Additional Remote Controls Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-EXPANSION - DE@NET Expansion Board for Control Boards NET Series

Product Overview The NET-EXPANSION board is designed to enhance the functionality of DE@NET control boards in the NET Series. Available in three versions, this expansion board offers additional inputs and outputs to support various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. It ensures seamless integration with compatible DE@NET boards. Key Features 6 inputs and 8 outputs for NET Series control boards Analog or resistive inputs Traffic light control Compass control Alarm contact with automatic closing on power failure Open gate warning light with variable frequency during opening/closing Compatible with NET230N, NET24N (from version 30), NET724N (from version 1), and NET724N/XL Product Description The NET-EXPANSION board enhances DE@NET control boards by providing additional inputs and outputs. It supports various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. The board also includes an open gate warning light with variable frequency during opening and closing. The expansion board is compatible with DE@NET boards that have a serial port, including NET230N and NET24N from version 30, NET724N from version 1, and NET724N/XL. This ensures seamless integration and enhanced functionality for your control systems. Product Variants Product CodeProductDescription 677620 NET-EXPANSION Expansion board with 6 inputs and 8 outputs for control boards NET Series. Includes features like analog or resistive inputs, traffic light control, compass control, alarm contact with automatic closing on power failure, and open gate warning light with variable frequency during opening/closing. Cable length 300mm + spacers. 677622 NET-EXPANSION MINI Mini expansion board with 4 resistive inputs and 1 NC-NO output, compatible only with NET230N and NET24N. Compatibility The NET-EXPANSION board is compatible with the following DE@NET control boards: NET230N (from version 30) NET24N (from version 30) NET724N (from version 1) NET724N/XL Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing control systems before installation.

DEA LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection

Product Overview The LOOP230 loop detector is a magnetic device designed to detect the presence of metal masses, such as vehicles, in a specific passage. When a metal mass is detected, the detector sends a command to the control unit, enabling automated systems like barriers to operate efficiently. Available in both 1-channel and 2-channel versions, the LOOP230 offers flexible solutions for various applications. Key Features Magnetic loop detector for vehicle detection. Available in 1-channel (LOOP230/1) and 2-channel (LOOP230/2) versions. Detects metal masses like cars and motorcycles. Sends commands to control units for automated operation. 2-channel version allows connection of two loops for enhanced control. Ideal for controlling entry and exit barriers or providing multiple commands to the same automation. Product Description LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection The LOOP230 loop detector is an essential component for automated systems that require vehicle detection. By connecting a magnetic loop, the device can detect the presence of metal masses and send appropriate commands to the control unit, ensuring smooth and efficient operation of barriers and other automated controls. Product Variants ProductDescription LOOP230/1 Loop detector, 1 channel. LOOP230/2 Loop detector, 2 channels. The 2-channel version of the LOOP230 allows the connection of two loops, providing the ability to control two separate but close automations (such as two opposite barriers for vehicle entry and exit) or to issue two commands to the same automation (such as opening before a vehicle passes and closing after it). This flexibility makes the LOOP230 an ideal solution for various automated systems that require precise and reliable vehicle detection and control.

DEA KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke

KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke This item is to be used with following DEA range: DEA OLI  

DEA OLI/SFR Adjustable fixing plates to be screwed

OLI/SFR Adjustable fixing plates to be screwed This item is to be used with following DEA range: DEA OLI  

DEA MAC-LOOK/P Extension for MAC, STING and LOOK rams

MAC-LOOK/P Extension for MAC, STING and LOOK rams This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK

DEA KIT KEY MAC/LOOK Unlocking key for MAC and LOOK ranges (5 pcs)

KIT KEY MAC/LOOK Unlocking key for MAC, LOOK (5 pcs) This item is to be used with following DEA ranges: DEA MAC DEA LOOK  

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke This item is to be used with LOOK DEA range.  

ROGER TECHNOLOGY B71/PBX | Hybrid Inverter | Powerbox Battery Charger and Solar Panel Function

Product Overview The B71/PBX Hybrid Inverter is a versatile power solution designed to provide seamless power for automation systems. It integrates a Powerbox battery charger and solar panel function, making it ideal for various applications requiring reliable and efficient power management. Key Features Hybrid inverter with Powerbox battery charger Supports connection to solar panels Available in "Network Assisted" and "Full Solar" versions Efficiently powers 36V DC brushless digital controllers 230V AC mains voltage support (Network Assisted version) Compact and robust design Product Description The B71/PBX Hybrid Inverter is designed to cater to the power needs of modern automation systems. It is available in two versions: Network Assisted Version (B71/PBX36/BOX): This version operates with a 230V AC mains voltage and provides a hybrid inverter solution for powering automation systems. It includes a battery charger function that can connect to both solar panels and the mains supply, ensuring uninterrupted power for 36V DC brushless digital controllers. Full Solar Version (B71/PBX/BOX): This version is dedicated to fully solar-powered automation systems. It provides a battery charger function solely through the connection to solar panels, making it an ideal solution for remote or off-grid applications. Specifications Product CodeVersionMains VoltageDescription B71/PBX36/BOX Network Assisted 230V AC Hybrid inverter, “Network Assisted” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels or mains supply for powering the 36V DC brushless digital controllers with a mains voltage of 230V AC. B71/PBX/BOX Full Solar / Hybrid inverter, “Full Solar” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels for powering the brushless digital controllers. The B71/PBX Hybrid Inverter is designed to ensure that your automation systems run smoothly, whether you are connected to the grid or relying solely on solar power. Its compact and robust design makes it a reliable choice for various environments. Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing automation systems and power requirements before installation.

FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

BFT Power supply (PSU) required for all Maxima Ultra LED light kits

MU LIGHT PSU - Power supply (PSU) required for all Maxima Ultra LED light kits We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a Power supply for Maxima 35 & Maxima 68 LED light kits and Maxima Ultra 36 LED lights kit. 2 Year guarantee

PROCON ELECTRONICS PROCON MD102-C Magnetic Vehicle Detection Kit | Prevent Accidental Bollard Activation

Product Overview The PROCON MD102-C Magnetic Vehicle Detection Kit is designed to prevent automatic bollards from accidentally rising beneath your vehicle. This next-generation vehicle detection system can also be used to open or close your bollards when a vehicle passes over the loop. Key Features Prevents accidental bollard activation Can be used to open or close bollards MD102 Probe can be buried in the road surface or mounted above ground MD102C Control Unit enables configuration and testing of the probe Complete ready-to-install vehicle detection system Includes 15 meters of cable pre-attached to the probe Super easy to install – no cutting in of induction loops required Install the probe underground or on a post next to your driveway Simply connect the probe cable to the control unit terminals 12/24Vdc Power input Manufactured by Procon Electronics, ensuring quality and reliability Can be used for presence and pulse detection Product Description The PROCON MD102-C Magnetic Vehicle Detection Kit offers a reliable and efficient solution for managing automatic bollards. By installing this system, you can prevent your bollards from accidentally rising beneath your vehicle, ensuring the safety and protection of both the vehicle and the bollard system. The MD102 Probe can be installed in various ways: buried in the road surface underneath the vehicle, mounted alongside the vehicle, or installed above ground next to the vehicle's passage. The accompanying MD102C Control Unit allows for easy configuration and testing of the probe, making the installation process straightforward. This complete vehicle detection system comes with 15 meters of cable pre-attached to the probe, eliminating the need for complex wiring or cutting induction loops. Simply connect the probe cable to the control unit terminals, and the system is ready to go. The MD102C Control Unit operates on a 12/24Vdc power input, providing flexibility for various installation environments. Manufactured by Procon Electronics, the MD102-C kit guarantees quality and reliability, ensuring consistent performance for your vehicle detection needs. Whether you need presence detection or pulse detection, this system has you covered. Options PROCON MD102C-CONTROLLER & MD102-PROBE (FULL KIT) PROCON MD102C-CONTROLLER ONLY PROCON MD102-PROBE ONLY Technical Specifications FeatureSpecification Power Input 12/24Vdc MD102C Control Unit 12/24VAC/DC, 50/60Hz, 30mA Cable Length 15 meters

PROCON ELECTRONICS PROCON LD-100 / LD-102 | Induction Loop Controller and Loop Detector | Single Channel (230V/24V)

Product Overview The PROCON LD-100/LD-102 is a single channel induction loop controller and detector designed for parking and access control applications. This reliable and efficient detector is connected to an inductive loop mounted in the road surface, which activates the detector when vehicles pass over it, switching on an output. Key Features Single channel induction loop detector for parking and access control Compatible with most single channel detectors on the market Easy to set-up and install Utilizes microprocessor and surface mount technology Compact design with a large number of functions 2-year guarantee for peace of mind Product Description The PROCON LD-100/LD-102 induction loop controller is an ideal solution for parking and access control applications, offering reliable performance and ease of installation. When connected to an inductive loop installed in the road surface, the detector activates an output when vehicles pass over the loop. This functionality makes it a perfect choice for managing vehicle access and parking systems. The LD-100/LD-102 uses advanced microprocessor and surface mount technology to pack numerous functions into a compact package. This ensures compatibility with most single channel detectors available on the market, making it a versatile addition to your access control system. Installation and setup are straightforward, allowing for quick deployment in various environments. With a 2-year guarantee, you can trust in the durability and reliability of the PROCON LD-100/LD-102. Technical Specifications Model: LD-100 / LD-102 Type: Single channel inductive loop detector Power Supply: 230V / 24V Compatibility: Compatible with most single channel detectors Technology: Microprocessor and surface mount technology Installation: Easy to set up and install Warranty: 2-year guarantee Recommendation It is recommended to use one loop detector per separate entrance or exit to ensure optimal performance and reliability in your parking and access control systems.

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

BFT SFR-B Standard Stroke Post Bracket

SFR-B STANDARD STROKE POST BRACKET Adjustable non-weld bracket for standard stroke motors

BFT SFR-B-L Long Stroke Post Bracket

SFR-B-L LONG STROKE POST BRACKET Adjustable non-weld bracket for long stroke motors.    

FAAC S800H Collar Assembly

Collar Assembly.  

FAAC S800H Hydraulic release

Hydraulic Release System.  

ROGER TECHNOLOGY H70/200AC/BOX Control Board | Swing Gate Automation | 230V AC

Product Overview The H70/200AC/BOX Control Board is a highly advanced solution for swing gate automation. Designed to handle two asynchronous monophase motors, this control board offers versatile programming options and robust power capabilities, making it ideal for a wide range of gate automation applications. With an IP54 protection level and the ability to operate in temperatures ranging from -10 to +55°C, the H70/200AC/BOX is built for durability and reliable performance. Key Features Supports swing gate automation for up to two motors Operates on 230V AC +/- 10% 50 Hz power supply IP54 protection level for robust durability Advanced programmable features for each output Inputs for safety rib edges NC and 8k2 Specifications SpecificationDetails Power 230V AC +/- 10% 50 Hz Protection Level IP54 Operating Temperature -10 to +55°C Max Flashing Light Charge 40W (12-230V AC/DC) Number of Motors Activated 2 asynchronous monophase Max Power per Motor 600W 230V AC Max Courtesy Light Charge 100W (12-230V AC/DC) Max Power Gate Open Light 2W 24V AC Max Voltage Accessories Output 350mA 24V AC (500mA 24V DC) Advanced Mode Features The H70/200AC/BOX control board offers an advanced mode that unlocks a wide range of programmable features. This allows for the configuration of each output to meet specific operational needs, providing flexibility and customization for various gate automation scenarios. Safety Features Equipped with inputs for safety rib edges NC and 8k2, the H70/200AC/BOX ensures enhanced safety for automated gate operations. These safety features help prevent accidents and ensure secure operation. Applications This control board is ideal for residential and commercial swing gate automation, providing reliable and customizable control for up to two motors. Its advanced features and robust design make it suitable for a wide range of gate automation projects.

ROGER TECHNOLOGY RL652 Standard Release Lever For Underground Motor

Roger Technology RL652 Standard Release Lever For Underground Motor  

FAAC S800H lever Manual Release

Lever Release System for S700 and S800  

LOCINOX PUMA Compact | 2-Way Adjustable 180° Surface Mounted Hinge

Product Overview The PUMA Compact 2-way adjustable 180° surface mounted hinge is designed to provide flexible and reliable support for residential gates. Featuring a powder coated aluminium housing, this compact hinge offers a 180° opening angle with both vertical and horizontal adjustability. The Quick-Fix fastening system ensures easy installation without the need for welding, making it an ideal choice for gates up to 1 metre wide and 60 kg. Key Features 180° opening and closing angle 2-way adjustability: vertical (20 mm) and horizontal (15 mm) Powder coated aluminium housing Stainless steel hinge axle for resistance to extreme weather conditions Supports gates up to 1 metre wide and 60 kg Suitable for left and right opening gates Aesthetic design for aluminium and smaller residential gates Easy mounting with Quick-Fix system, no welding needed Product Description The PUMA Compact hinge is a versatile and aesthetically pleasing surface mounted hinge designed for residential gates. Its 180° opening angle and 2-way adjustability make it highly flexible, allowing for both vertical and horizontal adjustments. This feature ensures a perfect fit for gates up to 1 metre wide and 60 kg. The hinge is constructed with a powder coated aluminium housing, providing a durable and weather-resistant finish. The stainless steel hinge axle enhances its resistance to extreme weather conditions, ensuring long-lasting performance. The PUMA Compact hinge is suitable for both left and right opening gates, making it a versatile choice for various installations. The Quick-Fix fastening system simplifies the installation process, eliminating the need for welding. This makes the PUMA Compact hinge easy to mount, saving time and effort during setup. Its compact design and aesthetic appeal make it an excellent choice for aluminium and smaller residential gates, seamlessly blending with modern gate designs. Specifications 180° opening and closing angle 20 mm vertical adjustability 15 mm width adjustability Powder coated aluminium housing Stainless steel hinge axle Supports gates up to 1 metre wide and 60 kg Suitable for left and right opening gates Easy mounting with Quick-Fix system RAL Colour Availability The PUMA Compact hinge is available in various RAL colours to match different gate finishes. Drawing Please refer to the product drawing for detailed dimensions and installation guidelines. Note: Images may differ from the actual product. What's in the Box 1 x PUMA Compact 2-way adjustable 180° surface mounted hinge Installation instructions All necessary mounting hardware     NOTE: Images may differ from the actual product  

V2 Gate Automation V2 Vulcan Foundation Box With Cataphoresis Finish

Cataphoresis finished steel foundation box with 110° opening release levers

V2 Gate Automation V2 Lever unit for opening over 110degrees & release lever

Lever unit for opening over 110 degrees & release lever for the foundation box of Vulcan motor.

ROGER TECHNOLOGY SYNUS/2 Dual Code Transmitter | Fixed & Rolling Code | 433.92 MHz

Product Overview The SYNUS/2 dual code transmitter is a versatile remote control device that operates at a frequency of 433.92 MHz. It offers the flexibility of both fixed code and rolling code modalities, making it suitable for a wide range of applications. With 2 channels and a built-in radio for copying fixed codes, this transmitter ensures reliable and secure operation. Key Features Dual code modality: Fixed code or Rolling code Operating frequency: 433.92 MHz 2 channels Radio for copying fixed codes Maximum open field range: 150 meters Compact and lightweight design Specifications FeatureSpecification Standard Power 3V DC Absorption 8mA Operating Temperature -10 to +55 °C Number of Channels 2 Codification Fix code or Rolling Code Modulation AM/ASK Carrier Frequency 433.92 MHz Number of Combinations 65,536 (Fix code) - 4,294,967,296 (Rolling code) Types of Fixed Codes Clonable MANCHESTER, PCM, Max. 64bit Number of Bits (Identification Code) 16 (Fix code) - 32 (Rolling code) Number of Bits Transmitted 28 (Fix code) - 144 (Rolling code) Radio for Copy Yes (only fixed code) Maximum Distance in Open Field 150 meters Battery Mod "CR2032" 3V Dimensions (L x W x H in mm) 38 x 68 x 11 Product Weight Packed (Kg) 0.04 Applications The SYNUS/2 dual code transmitter is ideal for use in residential, commercial, and industrial environments where secure and reliable remote control is required. Its ability to operate in both fixed and rolling code modes ensures compatibility with various systems and enhances security. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

DEA Foundation box for Ghost Motors

215 - Foundation box for Ghost Motors    

DEA 560F-960F - Limit switches set for LIVI 502

560F-960F - Limit switches set for LIVI 502 Limit switch set to be used on LIVI 502 swing gates operator.  

Roger Technology H93/RX20/I | Plug-in Receiver | 2 Channels, 433.92 MHz

Product Overview The H93/RX20/I is a plug-in receiver designed for use with control unit series H70, B70, EDGE, and CTRL. It operates on a standard power of 5V DC and features 2 channels, making it ideal for various gate automation applications. With its fix code modulation and AM/ASK carrier frequency of 433.92 MHz, this receiver ensures reliable performance and secure communication. Key Features Standard power: 5V DC Absorption: 15mA Operating temperature: -10°C to +55°C Number of channels: 2 Codification: Fix code Modulation: AM/ASK Carried frequency: 433.92 MHz Exit: Open collector Storable codes: 50 Sensibility: -107 dBm Input impedance: 50 Ω Maximum dimensions (L x W x H): 34 x 31 x 12 mm Product weight packed: 0.02 kg Product Description The H93/RX20/I plug-in receiver by Roger Technology is engineered for seamless integration with control units in the H70, B70, EDGE, and CTRL series. Operating on a 5V DC power supply with a low absorption of 15mA, this receiver is energy-efficient and suitable for continuous use in gate automation systems. It features 2 channels and supports fix code codification, providing a secure and reliable connection with a modulation of AM/ASK at a carried frequency of 433.92 MHz. The receiver has a high sensitivity of -107 dBm and an input impedance of 50 Ω, ensuring effective signal reception and transmission. The compact design of the H93/RX20/I, with dimensions of 34 x 31 x 12 mm and a weight of 0.02 kg when packed, allows for easy installation and integration into existing systems. It can store up to 50 codes, making it versatile and suitable for various applications in gate automation. Technical Support Enhance your gate automation system with the H93/RX20/I plug-in receiver. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology H85/TDR/E | Radio Keypad Selector | 12 Digit, 4 Channel

Product Overview The H85/TDR/E is a radio keypad selector with 12 digit numbers designed for secure and efficient access control. It features 4 channels and is suitable for both rolling code and fix code transmission, making it a versatile choice for various gate automation systems. Key Features Operating temperature: -10°C to +55°C Protection level: IP54 Average consumption when keypad active: 12 mA Number of user codes storable: 450 Maximum number of digits per user code: 6 Minimum number of digits per user code: 3 Codification: Fix code - Rolling Code Modulation: AM/ASK Carried frequency: 433.92 MHz Number of combinations: 65536 (fix code) - 4.294.967.296 (rolling code) Number of bits of the identification code: 16 (fix code) - 32 (rolling code) Number of bits transmitted: 28 (fix code) - 144 (rolling code) Battery: 2 x CR2032 Battery life: Minimum 2 years with 10 activations/day Installation type: External Maximum dimensions (L x W x H): 75 x 77 x 42 mm Product weight packed: 0.2 kg Product Description The H85/TDR/E radio keypad selector by Roger Technology is a reliable solution for secure access control. It supports up to 450 user codes with each code ranging from 3 to 6 digits, providing flexibility and security for various applications. The keypad operates on a carried frequency of 433.92 MHz and supports both fix code and rolling code transmissions. With an IP54 protection level, the H85/TDR/E is designed for external installation, ensuring durability and resistance against dust and water ingress. The keypad consumes an average of 12 mA when active and is powered by two CR2032 batteries, offering a battery life of at least 2 years with 10 activations per day. The modulation type is AM/ASK, and the number of combinations is extensive, with 65536 combinations for fix code and over 4.29 billion combinations for rolling code. The product dimensions are compact at 75 x 77 x 42 mm, and it weighs 0.2 kg when packed, making it easy to install and handle. Technical Support Ensure secure and efficient access control with the H85/TDR/E radio keypad selector. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

Roger Technology H70/105AC/BOX | Control Unit | 1 Motor 230V AC, Slow Down Feature

Product Overview The H70/105AC/BOX is a versatile control unit designed for operating 1 asynchronous monophase motor at 230V AC - 50Hz. It features a built-in slow down function and comes encased in a durable plastic box, providing IP56 protection against dust and water. Key Features Power Line Supply: 230V AC - 50Hz Operating Temperature: -10°C to +55°C Protection Level: IP56 Number of Motors Activated: 1 asynchronous monophase Max Power per Motor: 600W (230V AC) Max Courtesy Light Charge: 100W 230Vac - 25W 24Vac/dc Max Power Gate Open Light: 2W 24Vac Max Voltage Accessories Output: 300mA - 24Vcc Max Flashing Light Charge: 440W 230Vac - 25W 24Vac/dc Maximum Dimensions (L x W x H): 200 x 255 x 99 mm Product Weight Packed: 2 kg Number of Items per Pallet: 50 Product Description The H70/105AC/BOX control unit by Roger Technology is designed for efficient operation of one asynchronous monophase motor at 230V AC - 50Hz. Featuring a slow down function, it ensures smooth and secure gate movements, reducing wear and tear on the motor and gate structure. This control unit is encased in a robust plastic box with IP56 protection, offering resistance against dust and water, making it suitable for various environmental conditions. It operates within a temperature range of -10°C to +55°C, ensuring reliability across different climates. The H70/105AC/BOX supports a maximum motor power of 600W (230V AC) and provides outputs for courtesy lights, gate open lights, and flashing lights with respective maximum charges. The compact dimensions (200 x 255 x 99 mm) and a weight of 2 kg make it easy to install and integrate into existing gate automation systems. Each pallet can hold up to 50 units, facilitating bulk orders and distribution. Technical Support Enhance your gate automation system with the H70/105AC/BOX control unit, featuring robust construction and comprehensive functionality. For more details or to place an order, contact us today. Our team is ready to assist you with any inquiries.

ROGER TECHNOLOGY FU103 - Inox AISI 304 foundation box and lid.

FU103 Inox AISI 304 foundation box and lid.

ROGER TECHNOLOGY FU101 - Hot galvanised foundation box and lid.

FU101 Hot galvanized foundation box and lid.

ROGER TECHNOLOGY FU100 Cold galvanised foudation box and lid.

FU100 Cold galvanized foundation box and lid

LOCINOX MODULEC-SA Surface Mounted Electric Strike | 12V-24V AC/DC | Quick-Fix

Product Overview The MODULEC-SA Surface Mounted Electric Strike is designed for easy installation with its patented Quick-Fix system. This versatile electric strike is suitable for surface mounting and can be easily connected to both 12V and 24V AC/DC power supplies. It is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it adaptable for various access control needs. The MODULEC-SA is interchangeable with the SA keep and offers robust performance with resistance to pressure on the latch bolt up to 300 kg. Key Features Tested up to 500,000 movements Quick and easy installation with Quick-Fix Pressure resistance on latch bolt: 300 kg Compatible with SA, SH, and SM keeps Easy left or right configuration Corrosion-resistant black anodized aluminium housing Adjustable for gate profiles with 40-60 mm depth Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Specifications SpecificationDetails Movements Tested 500,000 Installation Quick-Fix Pressure Resistance 300 kg Compatibility SA, SH, and SM keeps Configuration Easy left or right changing Housing Material Black anodized aluminium Gate Profile Depth 40-60 mm Voltage 12V-24V AC/DC Consumption 12V - 1.25A / 24V - 0.62A Power 15W Versions Type SE.E: Emissa - Fail Close Type SE.R: Ruptura - Fail Open RAL Colour Availability The MODULEC-SA Electric Strike is available in a variety of RAL colours to match your gate and enhance its appearance. Please contact us for more information on available colours. Technical Drawings Technical drawings of the MODULEC-SA Electric Strike are available upon request. These drawings provide detailed dimensions and installation instructions to ensure proper fitting and functionality. Additional Information For further inquiries or additional information regarding the MODULEC-SA Surface Mounted Electric Strike, please contact us. Our team is ready to assist you with any questions or support you may need.  

LOCINOX SE Electric Strike for Swing Gates | 500 kg Pulling Force | Fail Close/Open

Product Overview The SE Electric Strike for swing gates is designed to provide robust and reliable access control. This electric strike can withstand a pulling force of 500 kg, ensuring high security. The deadbolt receiver is reinforced with stainless steel, enhancing its durability and strength. The SE Electric Strike is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Key Features Withstands 500 kg pulling force Reinforced stainless steel deadbolt receiver Available in Fail Close (Emissa) and Fail Open (Ruptura) versions Water resistant and weatherproof Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current Emissa: 1A Current Ruptura: 1.5A Specifications SpecificationDetails Type SE.E Emissa - Fail Close Type SE.R Ruptura - Fail Open Deadbolt Receiver Reinforced stainless steel Post Profiles 50 mm and more Voltage 12V AC/DC Current (Emissa) 1A Current (Ruptura) 1.5A Pressure Resistance 500 kg Water Resistance Yes Weatherproof Yes RAL Colour Availability The SE Electric Strike is available in a variety of RAL colors to match your gate and enhance its appearance. Please contact us for more information on available colors. Technical Drawings Technical drawings of the SE Electric Strike are available upon request. These drawings provide detailed dimensions and installation instructions to ensure proper fitting and functionality. Additional Information For further inquiries or additional information regarding the SE Electric Strike for swing gates, please contact us. Our team is ready to assist you with any questions or support you may need.   DRAWING  

ROGER TECHNOLOGY B73/EXP - EXPANSION CARD FOR CTRL AND CTRL/P

Roger Technology AG/EXP Signal Status Board, 2 Output, AGILIK-BIONIK Series B73/EXP - EXPANSION CARD FOR CTRL AND CTRL/P

ROGER TECHNOLOGY B71/BCHP/EXT Batteries Charger Kit | Emergency Charger for Brushless Digital Controller EDGE1/BOX - B70/1DCHP 36V DC

Product Overview The B71/BCHP/EXT Kit is an emergency battery charger designed for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BCHP/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.2 Kg Product Description The B71/BCHP/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BCHP/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current 400 mA Product Weight (Packed) 5.2 Kg Installation and Usage The B71/BCHP/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller EDGE1/BOX - B70/1DCHP remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BCHP/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/EXT Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/EXT Kit is an emergency battery charger designed for the Brushless digital controller B70/2DC/BOX 24V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BC/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.6 Kg Product Description The B71/BC/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BC/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br close jumper) 400 mA Product Weight (Packed) 5.6 Kg Installation and Usage The B71/BC/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BC/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/BOX Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/BOX Kit is an emergency battery charger designed for use with the Brushless digital controller B70/2DC/BOX 24V DC. This robust and efficient charging solution ensures your system remains operational during power outages, providing peace of mind and reliability. The kit supports various power line supplies and offers flexible charging options to meet your needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC Adjustable charge current options Compact dimensions: 243mm x 49mm x 89mm Lightweight: 0.5 Kg Product Description The B71/BC/BOX Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit is designed to support power line supplies ranging from 16V AC to 24V AC and operates effectively in a wide temperature range of -20°C to +55°C. With a maximum input power of 15W, the charger ensures that your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The adjustable charge current options, 250 mA for standard charging and 400 mA for fast charging (with the B71/BC/EXT option), provide flexibility to meet different battery capacities and charging needs. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br open jumper) 250 mA (for 1200mAh batteries) Charge Current (br close jumper) 400 mA (optional, for fast charge of 4500mAh batteries) - B71/BC/EXT Dimensions (L x W x H) 243mm x 49mm x 89mm Product Weight (Packed) 0.5 Kg Installation and Usage The B71/BC/BOX Kit is easy to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Follow the included instructions to connect the charger to your existing system, and choose the appropriate charge current based on your battery capacity. For fast charging, use the B71/BC/EXT option to increase the charge current to 400 mA for larger batteries. Additional Information For more details on the B71/BC/BOX Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

Roger Technology Brushless B70/1DCHP Control Board | 36V Heavy-Duty, High-Speed

Product Overview The Roger Technology Brushless B70/1DCHP Control Board is a high-performance 36V control board specifically designed for heavy-duty and high-speed sliding gate applications. Featuring a digital encoder, this control board ensures precise and reliable operation, making it ideal for demanding residential and commercial environments. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 36V control board designed for heavy-duty and high-speed sliding gates Brushless technology for enhanced efficiency and durability Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various high-demand applications Product Description The Roger Technology Brushless B70/1DCHP Control Board is engineered to deliver superior performance for heavy-duty and high-speed sliding gates. This 36V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement, even in demanding conditions. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use in high-demand settings. Specifications Control Board Type Brushless Voltage 36V Application Heavy-duty and high-speed sliding gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DCHP Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling heavy-duty and high-speed sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DCHP Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

Roger Technology Brushless B70/1DC Control Board | 24V Control with Digital Encoder

Product Overview The Roger Technology Brushless B70/1DC Control Board is a state-of-the-art 24V control board designed specifically for sliding gates. Equipped with a digital encoder, this control board ensures precise and reliable operation, making it an ideal choice for both residential and commercial applications. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 24V control board designed for sliding gates Brushless technology for enhanced efficiency Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various applications Product Description The Roger Technology Brushless B70/1DC Control Board is engineered to deliver superior performance for sliding gates. This 24V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use. Specifications Control Board Type Brushless Voltage 24V Application Sliding Gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DC Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DC Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

BFT Traffic Light LED 24v

BFT Traffic Light LED 24v

BFT BSC Off set arm

BSC Off set arm Off set arm - required when post to hinge is less than 60mm. (price per arm)

BFT THEKE cover

Large lockable empty enclosure for Deimos, Ares & Icaro. Steel in RAL5008

BFT H-14T HERAS Cog

Cog to suit nylon rack on Heras H style gates

ASO Indus Kit

ASO Indus Kit 71-242 Set S Inductive Transmission System The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. Features Inductive transmission kit CAT 3 transmission system for sliding gates Easy and fast installation 24V AC/DC 2 x Stationery Edge Inputs 2 x Moving Edge Inputs

BFT ALLU Power supply required for LED Light Crowns on Fixed or Gas Bollards

ALLU Power supply required for LED Light Crowns on Fixed or Gas Bollards

BFT SCP-SINGLE Heavy duty manual release mechanism c/w personalised key

SCP-SINGLE Heavy duty manual release mechanism complete with personalised key

BFT ARB Lux G Non-weld bracket kit for Lux GVS GV2B & GVR

ARB Lux G Non-weld bracket kit for Lux GVS, GV2B & GVR

DEA BLINDOS Aluminium safety enclosure, with European cylinder, ready for unlocking device by cable

BLINDOS Aluminium safety enclosure, with European cylinder, ready for unlocking device by cable To be used in combination with following products: 450N, 451, GEKO/SF, 560M, 580M, 721/AB, LATO/SF and 550PL/SF. Pack version BLINDOS + product is available here (click). 

Fadini F/746DXL Plate RH

Fadini F/746DXL Right Handed Plate with F-ring with square hole, to be welded to the gate

Fadini F/746SXL Plate LH

Fadini F/746SXL Left Handed Plate with F-ring with square hole, to be welded to the gate

BENINCA Pair Vandal Resistant Cover IRI.CELL for Pupilla Photocells

Beninca Vandal Resistant covers for Pupilla Photocells  Strong Metal casement and backplate protect against front and side impacts Elegantly designed to look sharp on any style of pillar or wall Side cut aperture allows perfect operation of 180 degree rotational lens  Supplied as a pair

DEA SB Back overhead door fixing plate for LOOK, MAC, STING

SB Back overhead door fixing plate for LOOK, MAC, STING This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK

DEA NET-NODE 2.0 Device for DE@NET Control Boards and External Receivers

Product Overview The NET-NODE 2.0 is a versatile device designed to facilitate seamless communication between DE@NET control boards and external receivers. It enables the integration of smart technology into your gate automation system, allowing you to program and control your gates directly from your smartphone using the DEAinstaller and DEAuser apps. Key Features Smart Electronics: NET-NODE allows the use of the DEAinstaller app to program the parameters of DE@NET control boards and store them securely on the DEAcloud. Your data will always be updated and available for consultation anytime, anywhere. Smartphone Control: Use the DEAuser app to control your gate with your smartphone, eliminating the need for keys or remembering access codes. Easy Integration: NET-NODE seamlessly integrates with DE@NET control boards and external receivers, enhancing the functionality of your gate automation system. Secure and Reliable: Ensures that your automation system is secure, with data stored safely on DEAcloud for easy access and management. Specifications Device: NET-NODE 2.0 Compatibility: DE@NET control boards and external receivers Apps: DEAinstaller, DEAuser Data Storage: DEAcloud Applications Programming DE@NET control boards via DEAinstaller app Controlling gates and automation systems via DEAuser app Secure data storage and management on DEAcloud For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

DEA 5M Unlocking Device by Wire (BLINDOS or LATOM) 550PL/SF

5M unlocking device by wire (to be used with art. LATOM or BLINDOS).

DEA Half European Cylinder M

Half European Cylinder.

DEA Double European Cylinder D

Double European Cylinder.

Vertical Electric Lock with Ground Selvage 110V DEA

Vertical electric lock (without European Cylinder) with ground selvage.

DEA AURA/N - LED flashing light, multi-voltage (24AC-DC/120AC/230AC), with antenna (433MHz/868MHz)

AURA/N - LED flashing light, multi-voltage (24AC-DC/120AC/230AC), with antenna (433MHz/868MHz) LED flashing light, multi-voltage 24AC-DC /120AC/230AC, with integrated antenna 433MHz/868MHz Cable L=5m

DEA Side Fixing Plate (Included in Motor) LE

Side Fixing Plate (Included in Motor).

DEA LBA25 Extensions for Shafts D=25.4MM

Extensions for Shafts D=25.4MM.

DEA Adapter for Shafts D=40MM LBA40

Adapter for Shafts D=40MM.

DEA Pinion Z=19 + Shaft Extension LAC19

Pinion Z=19 + Shaft Extension.

DEA Pinion Z=19 + Groove Wedge L19

Pinion Z=19 + Groove Wedge.

DEA 25M Chain for Manual Manoeuvre - LATO Accessory CG

25M Chain for Manual Manoeuvre - LATO Accessory.

DEA Chain Anchoring Brackets 800C/F

800C/F Chain Anchoring Brackets.

DEA Chain Tightener 800C/TEN

800C/TEN Chain Tightener.

DEA GHOST 200 Replacement Chain Kit 16B-1X26P

DEA GHOST 200 Replacement Chain Kit16B-1X26P

DEA 230V Operator LATO220NET - Automation for Industrial Sectional Doors

LATO Operator - 230V, with encoder, 12Kg - control board NET230N included.

DEA KIT TEO700 for Sectional Doors

Kit TEO 700 complete with steel track and chain. L = 3300mm (1pcs) and 1 art. GT2 transmitter.

DEA Battery Set for ADVANCE / SPACE BAT/ADV

Battery set for ADVANCE / SPACE.

DEA Unlocking Device by Cable with Lock 762C

Unlocking a device by cable with a lock.

DEA Unlocking Device by Cable Complete with Hole Cover Lock 761C

Unlocking a device by cable complete with hole cover lock.

DEA 723 Arm Adaptor for Sectional Doors

Arm adaptor for sectional doors.

DEA Arm to be Used with Counterweight Doors 722

Arm to be used with counterweight doors.

DEA 721/AB Unlocking Device by Cable 4M

Unlocking a device by cable (4M) to be used with art. BLINDOS.

DEA AB/BRACKET Fixing Plate Set for Track

Fixing plate set for the track.

DEA Set for External Unlocking Device 960K*

Set for unlocking device (to be connected to the handle).

DEA Hole Cover with Key for External Unlocking 960C

Hole Cover with Key for External Unlocking.

Pipe Support 30mm

Pipe Support - 30mm - to be screwed.

DEA 954V Splined Bushing - 300mm

Splined busing L=300mm (to be screwed).

DEA Fixing Plate - 2000mm 953NL

Fixing Plate - 2000mm.

DEA 953N Fixing Plate - 1300MM

Fixing Plate - 1300MM.

DEA Fixing Plate - 675mm 953C

Fixing Plate - 675mm.

DEA Pair of Pipes with Bushing 952BL

Pair of pipes with bushing. L=2000mm (for central mounting).

DEA Telescopic Bent Arm to be Screwed 951V dx

Telescopic bent arm to be screwed (right side).

DEA Telescopic Bent Arm to be Welded 951

Telescopic bent arm to be welded (profile 40x10mm).

DEA Telescopic Reinforced Straight Arm to be Screwed

telescopic reinforced straight arm to be screwed - Right and left.

DEA Telescopic Straight Arm 950V

Telescopic straight arm to be screwed, right and left.

DEA Galvanised Steel Telescopic Arm with 50mm Splined Bushing 950BS

Galvanised steel telescopic arm with 50mm splined bushing.

DEA Reinforced Galvanised Steel Telescopic Arm with Splined Bushing 560BT

Reinforced galvanized steel telescopic arm with splined bushing.

DEA 580M - External unlocking device by cable (4,5m) to be used with BLINDOS

580M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 580M + BLINDOS is available here (click).

DEA 580L/580V | Mounting Plate for ANGOLO (Horizontal or Vertical)

Product Overview The 580L/580V mounting plates are designed for the ANGOLO operator, providing versatile installation options to suit your specific needs. Choose between the 580L horizontal mounting plate for fastening the operator parallel to the gate, or the 580V vertical mounting plate for perpendicular installation. These mounting plates ensure secure and efficient installation of your ANGOLO operator. Product Guide CodeProductDescription 381070 580L Horizontal mounting plate (fastening of operator parallel to the gate) 381060 580V Vertical mounting plate (fastening of operator perpendicularly to the gate) Key Features 580L Horizontal Mounting Plate: Ideal for securing the operator parallel to the gate for a streamlined installation. 580V Vertical Mounting Plate: Perfect for fastening the operator perpendicularly to the gate, providing flexibility in installation. Durable Construction: Both mounting plates are built to ensure secure and long-lasting installation of your ANGOLO operator. For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

DEA SD502 - Junction box

SD502 - Junction box This product is to be used with LIVI 502.  

DEA 560P - Vertical fixing plate (fastening of operator perpendicularly to the gate)

560P - Vertical fixing plate (fastening of operator perpendicularly to the gate) This product is to be used with LIVI 502.

DEA 560M - external unlocking device by cable (4,5m) to be used with BLINDOS

560M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 560M + BLINDOS is available here (click).  

DEA 560 Articulated Arms for LIVI 502 | Aluminum & Galvanized Steel Options

Product Overview The 560 Articulated Arms for LIVI 502 are designed to enhance the functionality and versatility of the LIVI 502 automation system. These arms are available in a variety of materials and configurations to suit different installation needs. Whether you require aluminum or galvanized steel, sliding or painted options, the 560 series offers a robust solution for your gate automation requirements. Key Features Compatible with LIVI 502 automation system Available in aluminum and galvanized steel Options for both left and right side installations Durable construction for long-lasting performance Various configurations to meet specific needs Product Description The 560 Articulated Arms for LIVI 502 are specifically engineered to provide reliable and efficient operation for swing gates. These arms are essential components for the LIVI 502 automation system, offering flexibility and durability to accommodate various gate setups. The range includes different types of arms to ensure that you can find the perfect match for your specific installation requirements. Product Guide CodeProductDescription 629130 560A Aluminum articulated arm 629110 560BD Galvanized steel rail sliding arm, right side (L. 800 mm) 629120 560BS Galvanized steel rail sliding arm, left side (L. 800 mm) 629140 560BV Painted galvanized steel articulated arm Detailed Descriptions 560A - Aluminum Articulated Arm: Lightweight and durable, this arm is designed for easy installation and reliable performance. 560BD - Galvanized Steel Rail Sliding Arm (Right Side): This right-side sliding arm, made of galvanized steel, offers enhanced corrosion resistance and strength, measuring 800 mm in length. 560BS - Galvanized Steel Rail Sliding Arm (Left Side): Similar to the 560BD, this left-side sliding arm is also 800 mm long and provides the same durability and corrosion resistance. 560BV - Painted Galvanized Steel Articulated Arm: This painted version of the galvanized steel arm combines aesthetic appeal with robust performance, ensuring long-lasting use. What's in the Box 560 Articulated Arm (specific type based on order) Mounting hardware Installation instructions For more information or to explore our full range of products, please visit our website or contact our customer service team.

DEA KIT KEY GEKO - GEKO unlocking key (5 pcs)

KIT KEY GEKO - GEKO unlocking key (5 pcs) Unlocking key to be used on GEKO, comes in package of 5.  

DEA KIT CLIMB - Adapter set for gates on incline. For gates up to 2m - 150 kg; max gradient 12%

KIT CLIMB - Adapter set for gates on slopes. For gates up to 2m - 150 kg; max gradient 12% Kit Climb allows you to install on a slope with a gradient up to 12%. It can be used on gates up to 2 meters and 150 kg. It is suitable for GEKO and LIVI 502 operators.

DEA GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS

GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS Pack version GEKO/SF + BLINDOS is available here (click).    

DEA GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA)

GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 629260 GEKO/BA Aluminium articulated arm for GEKO and Angolo operators 629261 GEKO/BS Rail sliding arm, painted galvanized steel, for GEKO and Angolo operators 629262 GEKO/BL Long arm for GEKO, painted galvanized steel 629263 GEKO/BLA Long arm for GEKO, aluminium  

DEA MLS/SFR Adjustable Fixing Plates to be Screwed

MLS/SFR Adjustable Fixing Plates to be Screwed This item is to be used with following DEA ranges: DEA STING DEA LOOK  

DEA COL 515 Anti-falling stainless steel cable with 2 holes for swing doors

COL 515 Anti-falling stainless steel cable with 2 holes for swing doors This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK DEA OLI/N DEA GEKO DEA ANGOLO DEA LIVI 502

DEA BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators

BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators Rechargeable batteries kit for LIVI/N 24V operators, 12V - 1,2Ah, complete with wiring cables and fixing plate. More information in downloads.    

DEA 450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS

450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS Unlocking device by cable for LIVI/N (4,5m). To be used with BLINDOS. More information in downloads.  

DEA Racks for sliding gates - 1m length (111, 112, 113, 116)

DEA Racks for sliding gates - 1m length (111, 112, 113, 116) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 619000 111* Nylon rack, with fixing screws (1m) 126001 112** Galvanized steel rack 22x22mm (1m) 126000 113** Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) 126008 116 Galvanized steel rack M6 (1m)   NOTE:  * Order in multiples of 10 ** Order in multiples of 4  

CDVI Universal Radio Transmitter OPR-KIT and NANO Receiver

Product Overview The Universal Radio Transmitter OPR-KIT and NANO Receiver is designed to convert any device operating a switch into a wireless control system. This kit is particularly useful in situations where it is difficult to install cables, such as remotely sited disabled buttons or other remote switches. The receiver can memorize up to 85 CDVI radio transmitters, offering enhanced flexibility and control for a wide range of applications. Key Features Creates wireless devices from any switch-operated device Ideal for difficult cable installations Receiver can memorize up to 85 CDVI radio transmitters Rolling Code Keeloq® technology 433.92MHz frequency ASK modulation Compact and easy to install Product Description The OPR-KIT allows you to create your own wireless device, making it an ideal solution for converting any switch-operated device into a radio control system. This kit is particularly useful in areas where installing cables is challenging, such as for remotely sited disabled buttons. The NANO receiver enhances the flexibility of the kit, capable of memorizing up to 85 CDVI radio transmitters. Using Rolling Code Keeloq® technology, the OPR-KIT ensures secure and reliable communication between the transmitter and receiver. Operating at a frequency of 433.92MHz with ASK modulation, the kit provides a robust and efficient wireless control solution. Technical Specifications SpecificationDetails Frequency 433.92MHz Modulation ASK Coding Rolling Code Keeloq® Receiver Memory 85 transmitters Transmitter Voltage 9Vdc battery Receiver Voltage 12V to 24Vac/dc Transmitter Dimensions 54 x 29 x 6mm Receiver Dimensions 50 x 32 x 20mm Additional Information The Universal Radio Transmitter OPR-KIT and NANO Receiver provide a flexible and efficient solution for wireless control applications. Whether you need to convert a switch-operated device into a wireless system or require a solution for difficult cable installations, this kit offers the reliability and functionality you need. Included in the Box 1 x Universal Radio Transmitter OPR-KIT 1 x NANO Receiver 9Vdc battery for transmitter Installation manual

CDVI Digiway SR and Safety Kit EN16005-KIT-UD-SR for Double Door

Digiway SR and Safety Kit for Double Door.

CDVI Digiway SR and Safety Kit EN16005-KIT-U-SR for Single Door

Digiway SR and Safety Kit for Single Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.

CDVI Digiway Plus and Safety Kit EN16005-KIT-UD for Double Door

Digiway Plus and Safety Kit for Double Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.

CDVI Digiway Plus and Safety Kit EN16005-KIT-U for Single Door

Digiway Plus and Safety Kit for Single Door. Kit compliant with EN16005. Includes all sensors, signage and finger protection.

CDVI Door Safety Sensor DWSSS-5M1 | Monitored

Product Overview The Door Safety Sensor DWSSS-5M1 is a robust and reliable sensor designed to ensure the safety of users during the operation of automatic doors. Part of CDVI's range of sturdy sensors, the DWSSS-5M1 provides effective monitoring and protection, activating Digiway door automation systems in full compliance with the EN16005 standard. This infrared door sensor is essential for maintaining safety and compliance in environments where automatic doors are used. Key Features Monitored door safety sensor Infrared detection Ensures user safety during door operation Activates Digiway door automation systems Full compliance with EN16005 standard Product Description The DWSSS-5M1 Door Safety Sensor is an infrared sensor designed to ensure the safety of users when automatic doors are in operation. This monitored sensor is part of CDVI's range of high-quality safety devices that provide automatic door opening and user protection. It activates Digiway door automation systems, ensuring smooth and safe door operation in compliance with the EN16005 standard. Designed for use in various environments, the DWSSS-5M1 is ideal for public buildings, hospitals, and other locations where user safety is paramount. Its robust construction and reliable performance make it an essential component for any automatic door system. Technical Specifications SpecificationDetails Type Infrared door safety sensor Monitoring Yes Compliance EN16005 Additional Information The DWSSS-5M1 Door Safety Sensor ensures user protection by activating Digiway door automation systems. Its infrared technology provides reliable detection, ensuring that automatic doors operate safely and in compliance with the EN16005 standard. This sensor is a crucial addition to any facility where automatic doors are used, enhancing safety and operational efficiency. Included in the Box 1 x Door Safety Sensor DWSSS-5M1 Installation manual

V2 Gate Automation WES EASY

WES EASY - For use with easy controllers Optional card for radio control of safety devices using WES sensors

NICE Regulation Thermostat TW1 | For PW1 Heating Element

Product Overview The TW1 regulation thermostat is designed for use with the PW1 heating element. It activates the heating element when the detected temperature drops below the set threshold, gradually increasing the internal temperature of the product. This thermostat ensures that automation systems maintain optimal performance even in extreme weather conditions. Key Features Designed for use with the PW1 heating element Activates heating element when temperature drops below set threshold Adjustable intervention threshold between 0°C and -20°C Equipped with a button for operational testing at any time Product Description Regulation Thermostat TW1 for PW1 Heating Element The TW1 regulation thermostat is an essential component for maintaining the proper temperature of automation systems using the PW1 heating element. When the temperature detected by the thermostat falls below the set threshold, it activates the PW1 heating element to gradually raise the internal temperature, ensuring the system operates correctly in cold conditions. Adjustable Threshold The TW1 thermostat allows for the intervention threshold to be adjusted between 0°C and -20°C, providing flexibility to suit various environmental conditions and requirements. This adjustable feature ensures that the heating element activates precisely when needed to maintain optimal system performance. Easy Operational Testing The thermostat is equipped with a convenient button that allows users to perform operational tests at any time. This feature ensures that the heating element and thermostat are functioning correctly, providing peace of mind and reliable performance. With its adjustable threshold and easy-to-use test button, the TW1 regulation thermostat is a reliable and essential component for controlling the PW1 heating element, ensuring automation systems remain functional and efficient even in extreme weather conditions.

NICE Heating Element PW1 | For Automation Systems

Product Overview The PW1 Heating Element is designed to maintain a suitable temperature for automation systems, ensuring correct operation even under severe weather conditions. Each element has a consumption of 20W and is highly efficient thanks to the silicone sheath that covers the resistance and enhances heat diffusion. Key Features Maintains suitable temperature for automation systems Consumes 20W per element Silicone sheath for increased heat diffusion Directly fed by 230/120 Vac power supply through the TW1 thermostat Ensures correct operation under severe weather conditions Product Description Heating Element PW1 for Automation Systems The PW1 Heating Element is an essential component for maintaining the optimal temperature of your automation system. This element ensures that the system operates correctly even in extreme weather conditions, providing reliable performance and efficiency. Efficient and Reliable Each heating element consumes only 20W, making it an energy-efficient solution. The silicone sheath covering the resistance not only protects the element but also enhances the diffusion of heat, ensuring that the system remains at a suitable temperature for optimal operation. Easy Integration The PW1 Heating Element is directly powered by a 230/120 Vac power supply through the TW1 thermostat, ensuring seamless integration into your existing automation system. This setup provides precise temperature control, helping to maintain consistent performance regardless of external weather conditions. With its reliable performance and efficient design, the PW1 Heating Element is a crucial addition to any automation system requiring temperature regulation to function correctly in all weather conditions.

NICE Two-Channel Metal Mass Detector LP22 | 24V Power Supply

Product Overview The LP22 is a two-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Two-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Two-Channel Metal Mass Detector LP22 - 24V Power Supply The LP22 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP22 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP22 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP22 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.

NICE Single-Channel Metal Mass Detector LP21 | 24V Power Supply

Product Overview The LP21 is a single-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Single-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Single-Channel Metal Mass Detector LP21 - 24V Power Supply The LP21 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP21 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP21 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP21 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.

NICE Kit CMBK6 for Installing a Low Mecha - 6mnical Edge

Kit for installing a low mechanical edge, with aluminum profiles measuring 6m (to use together with CB).    

NICE Kit CMBK4 for Installing a Low Mechanical Edge - 4m

Kit for installing a low mechanical edge, with aluminium profiles measuring 4m (to use together with CB).

NICE High Mechanical Sensitive Edge with Aluminium Profile CMA2 5MT - Length 2.5m

High mechanical edge with aluminium profile - length 2.5m.

NICE High Mechanical Edge CMA 2MT with Aluminium Profile - 2m

High mechanical edge with aluminium profile - length 2m.

NICE High Mechanical Edge with Aluminium Profile CMA 1.7MT

High mechanical edge with aluminium profile, measuring 1.7m.  

NICE High Mechanical Edge with Aluminium Profile CMA1 5MT - 1.5m

High mechanical edge with aluminium profile measuring 1.5m.

NICE Angular Extension for Measurements NSEA from 1.25 to 2.50m - Impact Force Measurement

Angular extension for measurements from 1.25 to 2.50m, applicable on NSEL.

NICE Straight Extension NSEL for Measurements from 30 to 50cm - Impact Force Measurement

Straight extension for measurements from 30 to 50cm - Applicable on NSFB and NSFS.

NICE Electrical Connection Kit DBM10 for Safety Sensitive Edges - Gates up to 10m

Electrical connection kit for safety-sensitive edges on moveable leafs for gates up to 10m.

NICE Electrical Connection Kit for Safety Sensitive Edges DBM5 - Gates up to 5m

Complete electrical connection kit for safety-sensitive edges on moveable leafs - gates up to 5m.

NICE Control Interface TCE for Sensitive Edge

Control interface for a sensitive edge.

NICE Relay Wireless Interface IRW for Sensitive Edges with Wireless Transmitter

Wireless relay interface for sensitive edges with a wireless transmitter for control units with classical connections (stop and photo).

NICE Transponder Card MOCARD - For ERA Proximity Reader

Transponder card for proximity reader, programmable via OBOX.   Pack of 10

NICE ERA Neutral Key CHEU for EKSEU and EKSIEU

Neutral Key for EKSEU & EKSIEU.

NICE ERA Neutral Key CHS for EKS & EKSI

Neutral key for EKS & EKSI.

NICE FloR System Receiver SMXI with SM Plug - In 433.92MHz

Universal pre-wired receiver, 2 channels with memory containing 256 codes - FLO coding.

NICE OX2TFM Receiver | 2 Channels with Built-In Transmitter, 868.46 MHz

Product Overview The OX2TFM is a pre-wired 2 channel receiver with a built-in transmitter, operating on the 868.46 MHz frequency. This universal receiver is designed for use with all types of control units, making it ideal for controlling automation systems, lighting, irrigation, and other electric circuits. Its convenient and practical design ensures quick and user-friendly programming. Key Features 2 channel receiver with built-in transmitter Operates on 868.46 MHz frequency Pre-wired for universal use Compatible with all types of control units Suitable for automation, lighting, irrigation, and other electric circuits Convenient and practical design Quick and user-friendly programming Product Description OX2TFM Receiver - 2 Channels with Built-In Transmitter The OX2TFM is a versatile and reliable receiver designed to control a wide range of systems, including automation, lighting, and irrigation. With its built-in transmitter and 2 channels, this receiver operates on the 868.46 MHz frequency, providing robust performance and flexibility. The pre-wired design ensures easy installation and compatibility with various control units. Universal Compatibility This receiver is universally compatible with all types of control units, making it an ideal solution for various applications. Whether you need to control an automation system, lighting setup, irrigation system, or other electric circuits, the OX2TFM provides reliable and efficient performance. Easy Programming and Installation The OX2TFM receiver is designed for convenience and practicality, featuring quick and user-friendly programming. The pre-wired design simplifies the installation process, allowing you to easily integrate the receiver into your existing control systems.

NICE Receiver OX2FM - 2 Channels Without Built-In Transmitter

Pre-wired Receiver with Opera System functions - 2 channels 868.46MHz without built-in transmitter.  

NICE Universal Receivers SMX2R with 256-Codes Memory

Universal receivers, 2 channels with 256-codes memory, pre-wired.

NICE M6 Rack Zinc Coated ROA81

M6 Rack 30x30x1000mm - Zinc coated, to be coupled with RUA12.

NICE 12-Teeth Pinion RUA12 Module 6 - To be coupled with RACK ROA81

12 - teeth pinion, module 6, to be coupled with Rack ROA81.

NICE Buffer Battery PS424

Buffer Battery - Walky Kit Accessory.

NICE Mechanical Travel Stops PLA13 for Closing and Opening Manoeuvres

mechanical travel stops for closing and opening maneuvers - mechanical accessory.

NICE M FAB MEA1 Accessory for Opening

Accessory for opening up to 360' for gates max 2.5m in length.

NICE M FAB MEA3 Lever - Type Key Unlock System

Lever - type key unlock system to use when system is installed on surfaces such as sand or earth.  

NICE Key Unlock System M FAB MEA2

Key unlock system - Fab accessory.

NICE Rear Bracket TOONA PLA6

Rear Bracket for Toona Kit - 250mm long.

NICE Wireless LLW - Flashing Light with Built - In Photovoltaic Panel

Wireless flashing light with the built-in photovoltaic panel.

NICE Pair of PHWA1 Adapters for PHW on PPH1 Posts

Pair of adapters for PHW on PPH1 posts.

NICE 24V Battery Box Solemyo PSY24 with Control Circuit and Carry Handles

24V battery box with control circuit and carry handle.

NICE Solemyo SYP30 Photovoltaic Panel for 24 V Supply - Max Power 30W

Photovoltaic Panel for 24 V Supply with Maximum Power 30W.

NICE Solemyo Photovoltaic Panel SYP for 24V Supply - Max Power 15W

Photovoltaic Panel for 24 V Supply with Maximum Power 15W.

NICE Solemyo SYKCE | Solar Power Kit with SYP Photovoltaic Panel and PSY24 Battery

Product Overview The Solemyo SYKCE Solar Power Kit is a comprehensive solution designed to automate gates, garage doors, and road barriers using solar power. This kit includes the SYP photovoltaic panel and the PSY24 battery box with a charging control circuit, providing a reliable and eco-friendly power source for your automation systems. Key Features Complete solar power kit for automation systems Includes SYP photovoltaic panel for 24V supply PSY24 battery box with control circuit and carry handles Contains all necessary cables and connectors Ideal for gates, garage doors, and road barriers Eco-friendly and sustainable power solution Product Description Solemyo SYKCE Solar Power Kit - SYP Photovoltaic Panel and PSY24 Battery The Solemyo SYKCE Solar Power Kit offers a sustainable and efficient way to automate gates, garage doors, and road barriers. This kit includes the SYP photovoltaic panel, which provides a 24V power supply, and the PSY24 battery box equipped with a charging control circuit. Together, they create a reliable solar power system for your automation needs. Components Included SYP Photovoltaic Panel: A high-efficiency panel that generates a 24V power supply, harnessing solar energy to power your automation systems. PSY24 Battery Box: A 24V battery box with an integrated control circuit and convenient carry handles, ensuring easy transport and installation. The control circuit manages the charging process, optimizing the battery life and performance. Cables and Connectors: The kit includes all necessary cables and connectors to ensure a seamless connection between the photovoltaic panel and the battery box, as well as to the automation systems. Eco-Friendly Automation The Solemyo SYKCE Solar Power Kit provides an eco-friendly alternative to traditional power sources. By utilizing solar energy, this kit helps reduce carbon emissions and energy costs, promoting a sustainable approach to automation. Applications Ideal for a variety of applications, the SYKCE kit is perfect for automating gates, garage doors, and road barriers. It ensures that your automation systems operate smoothly and efficiently, even in locations without access to conventional power sources.

NICE Aluminium Post ERA PPH1 - Housing for 1 Photocell / Medium and Large

Outdoor aluminium post with protected housing for 1 photocell - Medium and Large 500mm h.

NICE Bi-Di-Awning | Exterior Bidirectional Interface for Tubular Motor

Product Overview The Bi-Di-Awning is an exterior bidirectional interface designed for tubular motors of outdoor awnings. It enables seamless integration of mechanical tubular motors into smart home systems, offering individual, group, or scenario control. The interface provides feedback on automation status, helps manage electrical loads, and reduces energy waste. The Bi-Di-Awning is compatible with voice commands via Amazon Alexa, Google Home, and Siri Shortcuts, and can be managed remotely through the Yubii or MyNice apps. Key Features Exterior bidirectional interface for tubular motors Control connected motors individually, in groups, or in scenarios Receive feedback on automation status Manage electrical loads to reduce energy waste Compatible with Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment Protect indoor environments from the heat of the sun Fast programming of limit switches from the transmitter Set two intermediate opening positions Program partial opening based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors Control Venetian blinds, rolling shutters, and awnings without a gateway Acts as a radio signal repeater to extend coverage Product Description Bi-Di-Awning Exterior Bidirectional Interface for Tubular Motors The Bi-Di-Awning interface integrates mechanical tubular motors of outdoor awnings into your smart home system, allowing for comprehensive control and management. Whether you need to control the motors individually, in groups, or as part of a scenario, the Bi-Di-Awning provides the flexibility and functionality you need. Smart Home Compatibility Enjoy the convenience of controlling your awnings through voice commands with Amazon Alexa, Google Home, and Siri Shortcuts. Manage your devices remotely using the Yubii or MyNice apps on your smartphone, smartwatch, or car infotainment system. Efficient Energy Management The Bi-Di-Awning helps reduce energy waste by controlling consumption and managing electrical loads effectively. Protect your indoor environment from the heat of the sun, making your climate more comfortable and cutting back on air conditioning use. Advanced Programming and Compatibility The interface allows for fast programming of limit switches directly from the transmitter by performing two complete manoeuvres, ensuring continuous automatic calibration. You can set two intermediate opening positions and program partial openings based on sun sensor settings. The Bi-Di-Awning is compatible with both unidirectional and bidirectional remote controls and climate sensors, making it a versatile solution for controlling Venetian blinds, rolling shutters, and awnings without the need for a gateway. Enhanced Signal Coverage Each bidirectional product acts as a radio signal repeater, extending the signal coverage and ensuring reliable communication across your system.

NICE TT2D Mindy Control Unit | Management of 230 Vac Lighting Systems

Product Overview The TT2D Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and switching module, making it a versatile solution for efficiently controlling your lighting systems. This unit is compatible with a wide range of Nice transmitters, ensuring seamless integration and reliable performance. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver and switching module Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2D Mindy Control Unit for 230 Vac Lighting Systems The TT2D Mindy Control Unit is an advanced solution for managing 230 Vac lighting systems. This miniaturised unit includes a built-in radio receiver and switching module, providing comprehensive control over your lighting setup. Its compatibility with various Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo, ensures that you can easily integrate it into your existing system. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, offering ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2D Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2D Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.