BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

BFT ACV20 - Protective Covers for Desme Photocells

Product Overview Protective covers designed specifically for Desme photocells.  

KEY AUTOMATION EGO Columns EG50, EG100 | Photocells and Selectors | LED Lights

Product Overview The EGO Columns for photocells and selectors are designed to provide reliable and efficient lighting solutions for large areas. Made entirely of aluminum and available in heights of 500 mm and 1000 mm, these columns feature replaceable LED lights to ensure long-lasting performance. The integrated LED lights enhance visibility and security, making them ideal for various applications. Key Features LED lights to illuminate large areas Constructed entirely of aluminum Available heights: 500 mm, 1000 mm Replaceable LED lights Product Description Specifications SpecificationDetails Voltage 24-35 Vdc Color Rendering Index (CRI) >90 Color Temperature 3000K Luminous Flux 450lm - 900lm Protection Degree IP54 Models CodeDescription EG50 Support post h. 50 cm EG50L Support post h. 50 cm with integrated LED light (5W LED) EG100 Support post h. 100 cm EG100L Support post h. 100 cm with integrated LED light (10W LED) EG100A Support post h. 100 cm with accessory housing EG100LA Support post h. 100 cm with integrated LED light (10W LED) and accessory housing Additional Components CTLIGHT2: Voltage regulator for LED lights 24 Vdc, max 30W (mandatory for all control units except BOXLED control units) Dimensions Height: 500 mm or 1000 mm Usage Limits The performance values can be affected by environmental conditions and the installation setup.

FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

Fadini F/746DXL Plate RH

Fadini F/746DXL Right Handed Plate with F-ring with square hole, to be welded to the gate

Fadini F/746SXL Plate LH

Fadini F/746SXL Left Handed Plate with F-ring with square hole, to be welded to the gate

BENINCA Pair Vandal Resistant Cover IRI.CELL for Pupilla Photocells

Beninca Vandal Resistant covers for Pupilla Photocells  Strong Metal casement and backplate protect against front and side impacts Elegantly designed to look sharp on any style of pillar or wall Side cut aperture allows perfect operation of 180 degree rotational lens  Supplied as a pair

NICE Aluminium Post ERA PPH1 - Housing for 1 Photocell / Medium and Large

Outdoor aluminium post with protected housing for 1 photocell - Medium and Large 500mm h.

ROGER TECHNOLOGY KIT EDGE1/22/UK - 36V Control Kit for 2 Brushless Motors

Product Overview The KIT EDGE1/22/UK is an advanced electronic control kit designed for managing two 36V brushless motors. It comes complete with a digital controller, plug-in radio receiver, transmitters, photocells, a flashing light, and an antenna, ensuring seamless operation and enhanced security for your automated gate systems. Key Features 36V digital controller for two brushless motors Includes plug-in radio receiver with 2 channels Comes with two 2-channel transmitters Synchronized external photocells (up to 4 pairs) LED flashing light for visual alerts High-performance antenna for reliable signal reception Product Description The KIT EDGE1/22/UK is specifically designed to provide robust control for two brushless motors operating at 36V. This kit is perfect for various applications, including swing and sliding gate systems, ensuring reliable and efficient performance. The inclusion of a digital controller and various accessories enhances the functionality and safety of your automated gate setup. What's in the Box 1 x EDGE1/Box Control Unit: Digital controller for managing two brushless motors. 1 x H93/RX22A/1 Plug-in Radio Receiver: Operates at 433.92 MHz with 2 channels for seamless operation. 2 x E80/TX52R/2 Transmitters: Dual-channel transmitters for remote control of your gate system. 1 x R90/F4ES Pair of External Photocells: Synchronized photocells for enhanced safety, supporting up to 4 pairs. 1 x R92/LED24 LED Flashing Light: Provides visual alerts during gate operation. 1 x R91/AN1/LR1 Antenna: Ensures reliable signal reception for optimal performance. Specifications ComponentDescription Control Unit EDGE1/Box for 2 Brushless Motors Radio Receiver H93/RX22A/1 Plug-in, 2 channels, 433.92 MHz Transmitters 2 x E80/TX52R/2, Dual-channel, 433.92 MHz Photocells R90/F4ES, Synchronized, Maximum 4 pairs Flashing Light R92/LED24 Antenna R91/AN1/LR1 Applications The KIT EDGE1/20 is ideal for controlling swing and sliding gate systems in both residential and commercial settings. Its advanced digital controller and comprehensive accessory package ensure efficient and secure operation.  

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops