BEA LZR-PS - Power supply for 2x LZR Sensors

Product Overview This 24V DC 0.75A power supply is designed specifically for BEA LZR laser safety sensors. A single unit can power up to two laser safety sensors simultaneously. Each BEA sensor installation requires one appropriate power supply for proper operation.

REMOTE CONTROL - Universal remote control for BEA sensors.

Product Overview Universal remote control for the adjustments of our sensors.  

BEA LZR HOUSING BRACKET - Bracket accessory

Product Overview Bracket Accessory for LZR range. Housing bracket.  

BEA LZR-BA - Bracket accessory

Product Overview Bracket Accessory for LZR range.

BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

DEA LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection

Product Overview The LOOP230 loop detector is a magnetic device designed to detect the presence of metal masses, such as vehicles, in a specific passage. When a metal mass is detected, the detector sends a command to the control unit, enabling automated systems like barriers to operate efficiently. Available in both 1-channel and 2-channel versions, the LOOP230 offers flexible solutions for various applications. Key Features Magnetic loop detector for vehicle detection. Available in 1-channel (LOOP230/1) and 2-channel (LOOP230/2) versions. Detects metal masses like cars and motorcycles. Sends commands to control units for automated operation. 2-channel version allows connection of two loops for enhanced control. Ideal for controlling entry and exit barriers or providing multiple commands to the same automation. Product Description LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection The LOOP230 loop detector is an essential component for automated systems that require vehicle detection. By connecting a magnetic loop, the device can detect the presence of metal masses and send appropriate commands to the control unit, ensuring smooth and efficient operation of barriers and other automated controls. Product Variants ProductDescription LOOP230/1 Loop detector, 1 channel. LOOP230/2 Loop detector, 2 channels. The 2-channel version of the LOOP230 allows the connection of two loops, providing the ability to control two separate but close automations (such as two opposite barriers for vehicle entry and exit) or to issue two commands to the same automation (such as opening before a vehicle passes and closing after it). This flexibility makes the LOOP230 an ideal solution for various automated systems that require precise and reliable vehicle detection and control.

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

PROCON ELECTRONICS PROCON MD102-C Magnetic Vehicle Detection Kit | Prevent Accidental Bollard Activation

Product Overview The PROCON MD102-C Magnetic Vehicle Detection Kit is designed to prevent automatic bollards from accidentally rising beneath your vehicle. This next-generation vehicle detection system can also be used to open or close your bollards when a vehicle passes over the loop. Key Features Prevents accidental bollard activation Can be used to open or close bollards MD102 Probe can be buried in the road surface or mounted above ground MD102C Control Unit enables configuration and testing of the probe Complete ready-to-install vehicle detection system Includes 15 meters of cable pre-attached to the probe Super easy to install – no cutting in of induction loops required Install the probe underground or on a post next to your driveway Simply connect the probe cable to the control unit terminals 12/24Vdc Power input Manufactured by Procon Electronics, ensuring quality and reliability Can be used for presence and pulse detection Product Description The PROCON MD102-C Magnetic Vehicle Detection Kit offers a reliable and efficient solution for managing automatic bollards. By installing this system, you can prevent your bollards from accidentally rising beneath your vehicle, ensuring the safety and protection of both the vehicle and the bollard system. The MD102 Probe can be installed in various ways: buried in the road surface underneath the vehicle, mounted alongside the vehicle, or installed above ground next to the vehicle's passage. The accompanying MD102C Control Unit allows for easy configuration and testing of the probe, making the installation process straightforward. This complete vehicle detection system comes with 15 meters of cable pre-attached to the probe, eliminating the need for complex wiring or cutting induction loops. Simply connect the probe cable to the control unit terminals, and the system is ready to go. The MD102C Control Unit operates on a 12/24Vdc power input, providing flexibility for various installation environments. Manufactured by Procon Electronics, the MD102-C kit guarantees quality and reliability, ensuring consistent performance for your vehicle detection needs. Whether you need presence detection or pulse detection, this system has you covered. Options PROCON MD102C-CONTROLLER & MD102-PROBE (FULL KIT) PROCON MD102C-CONTROLLER ONLY PROCON MD102-PROBE ONLY Technical Specifications FeatureSpecification Power Input 12/24Vdc MD102C Control Unit 12/24VAC/DC, 50/60Hz, 30mA Cable Length 15 meters

PROCON ELECTRONICS PROCON LD-100 / LD-102 | Induction Loop Controller and Loop Detector | Single Channel (230V/24V)

Product Overview The PROCON LD-100/LD-102 is a single channel induction loop controller and detector designed for parking and access control applications. This reliable and efficient detector is connected to an inductive loop mounted in the road surface, which activates the detector when vehicles pass over it, switching on an output. Key Features Single channel induction loop detector for parking and access control Compatible with most single channel detectors on the market Easy to set-up and install Utilizes microprocessor and surface mount technology Compact design with a large number of functions 2-year guarantee for peace of mind Product Description The PROCON LD-100/LD-102 induction loop controller is an ideal solution for parking and access control applications, offering reliable performance and ease of installation. When connected to an inductive loop installed in the road surface, the detector activates an output when vehicles pass over the loop. This functionality makes it a perfect choice for managing vehicle access and parking systems. The LD-100/LD-102 uses advanced microprocessor and surface mount technology to pack numerous functions into a compact package. This ensures compatibility with most single channel detectors available on the market, making it a versatile addition to your access control system. Installation and setup are straightforward, allowing for quick deployment in various environments. With a 2-year guarantee, you can trust in the durability and reliability of the PROCON LD-100/LD-102. Technical Specifications Model: LD-100 / LD-102 Type: Single channel inductive loop detector Power Supply: 230V / 24V Compatibility: Compatible with most single channel detectors Technology: Microprocessor and surface mount technology Installation: Easy to set up and install Warranty: 2-year guarantee Recommendation It is recommended to use one loop detector per separate entrance or exit to ensure optimal performance and reliability in your parking and access control systems.

NICE Two-Channel Metal Mass Detector LP22 | 24V Power Supply

Product Overview The LP22 is a two-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Two-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Two-Channel Metal Mass Detector LP22 - 24V Power Supply The LP22 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP22 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP22 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP22 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.

NICE Single-Channel Metal Mass Detector LP21 | 24V Power Supply

Product Overview The LP21 is a single-channel metal mass detector designed for detecting metal objects. Powered by a 24V power supply, this detector features a magnetic sensor for reliable detection. It is equipped with an LCD display for easy operation, control, and programming of parameters. Key Features Single-channel metal mass detector Operates on a 24V power supply Magnetic sensor for detecting metal objects Simple and safe operation with LCD display Quick and versatile with unlimited functions Intuitive programming Automatic indication of loop inductance Product Description Single-Channel Metal Mass Detector LP21 - 24V Power Supply The LP21 metal mass detector is a highly efficient and reliable device designed for detecting metal objects. It operates on a 24V power supply and uses a magnetic sensor for accurate detection. The device features a user-friendly LCD display that allows for easy control, monitoring, and programming of its parameters. Simple and Safe Operation The LP21 detector ensures simple and safe operation, with all functions and parameters easily controllable via the integrated LCD display. This makes it easy to check and program the device as needed, ensuring optimal performance. Quick and Versatile With its unlimited functions and intuitive programming, the LP21 metal mass detector is both quick and versatile. It is designed to meet a wide range of detection needs, making it a valuable addition to any metal detection setup. Integrated Measurement System The LP21 features an integrated measurement system that automatically indicates the loop inductance. This feature enhances the device's accuracy and reliability, ensuring consistent performance in various applications.

CAME 24v DC magnetic sensors one channel magnetic induction loop sensor SMA

3 Year guarantee

CAME 24v DC magnetic sensors bi channel magnetic induction loop sensor SMA2

CAME SMA2 24 V AC-DC two Channel Magnetic Sensor for passage access control.

PROCON ELECTRONICS 230v Induction Loop Controller LD200 and base dual channel boxed loop detector

2 Year guarantee

PROCON ELECTRONICS 24v Induction Loop Controller LD202 and base dual channel boxed loop detector

2 Year guarantee

PROCON ELECTRONICS 24v single channel card loop detector LD113

2 Year guarantee

PROCON ELECTRONICS 24v dual channel card loop detector LD213

2 Year guarantee