BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

CAME ZLX ENCLOSURE

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

Locinox DINO | 180° Double Bearing Hinge | Aluminium Housing, Stainless Steel Bearings

Product Overview The Locinox DINO is a robust 180° double bearing hinge designed for gates. Featuring an aluminium housing and stainless steel bearings, this hinge ensures a smooth and reliable opening and closing mechanism. The DINO hinge is easy to install with the innovative Quick-Fix system, providing a secure and vandal-proof fixing. Its aesthetic design makes it an ideal choice for both functional and stylish gate installations. Key Features 180° opening angle Contains 2 stainless steel bearings for smooth operation Anti-theft and vandal-proof fixing Compatible with Mammoth-180 Supports gates up to 150 kg (maximum width of 1.5 m) Suitable for left & right turning gates Aesthetic design with powder-coated aluminium housing Fast and easy installation with Quick-Fix Sold per pair Product Description Specifications Opening Angle: 180° Bearings: 2 stainless steel bearings Fixing: Anti-theft and vandal-proof Compatibility: Can be combined with Mammoth-180 Gate Capacity: Up to 150 kg (max width 1.5 m) Turning Direction: Left & right turning gates Design: Aesthetic, powder-coated aluminium housing Installation: Quick-Fix system Packaging: Packed per pair The Locinox DINO hinge is designed for those who need a reliable and durable solution for their gates. The hinge features a 180° opening angle, making it versatile for various gate applications. The inclusion of two stainless steel bearings ensures a smooth and seamless operation, reducing wear and tear on the gate and the hinge itself. The DINO hinge is built with security in mind. Its anti-theft and vandal-proof fixing system ensures that the hinge remains securely in place, providing peace of mind. The hinge is also compatible with the Mammoth-180, allowing for further customization and enhancement of your gate system. Constructed from powder-coated aluminium, the DINO hinge not only offers a sleek and modern aesthetic but also provides excellent durability and resistance to the elements. The Quick-Fix installation system makes the hinge easy to mount, saving time and effort during the setup process. This hinge is suitable for gates up to 150 kg in weight and with a maximum width of 1.5 m, making it a versatile choice for various gate types. Whether you need a hinge for a left or right turning gate, the DINO hinge meets the requirements with its robust design and flexible installation options. NOTE: Images may differ from the actual product.

Locinox SFKM | Stainless Steel Surface Mounted Keep for Fortylock, Fiftylock, and Sixtylock | Square Profiles

Product Overview The Locinox SFKM is a stainless steel surface mounted keep designed for use with Fortylock, Fiftylock, and Sixtylock insert locks, specifically for square gate profiles. This aesthetically pleasing keep is ideal for small metal, aluminium, and PVC gates. Its limited 8 mm depth ensures a discreet look while providing robust functionality. The innovative Quick-Fix system ensures a fast and strong fixation, making installation quick and easy. This unique keep, when combined with the insert lock, ensures a strong gate anchoring for enhanced security and durability. Key Features Stainless steel keep for square profiles as of 40 mm Compatible with Fortylock, Fiftylock, Sixtylock, and Eightylock Extruded aluminium stop plate with rubber strip for long-term use Includes innovative Quick-Fix fixations and self-drilling screws Easy left or right changing Elegant design with a visible thickness of 8 mm Adjustable stop plate for 40 mm to 60 mm gate frames Adjustable guide to prevent damage to the day bolt and post Product Description Specifications Material: Stainless steel Compatibility: Fortylock, Fiftylock, Sixtylock, and Eightylock Profile Type: Square profiles as of 40 mm Stop Plate: Extruded aluminium with rubber strip Installation: Quick-Fix system with self-drilling screws Design: Visible thickness of 8 mm, elegant and discreet Adjustability: Adjustable stop plate for 40 mm to 60 mm gate frames, adjustable guide for day bolt The Locinox SFKM surface mounted keep is designed to offer a secure and aesthetically pleasing solution for various types of gates. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, equipped with a rubber strip, enhances the keep's longevity and functionality by reducing wear and noise. Installation is straightforward with the innovative Quick-Fix system, which includes self-drilling screws for a strong and fast setup. The keep is easily adjustable, allowing it to fit gate frames ranging from 40 mm to 60 mm. Additionally, the adjustable guide prevents damage to the day bolt and post, ensuring smooth and reliable operation. The elegant design of the SFKM, with its visible thickness of only 8 mm, ensures that it blends seamlessly with the gate, providing a discreet yet effective locking solution. This keep is perfect for small metal, aluminium, and PVC gates, and its compatibility with various insert locks makes it a versatile choice for enhancing gate security. NOTE: Images may differ from the actual product.

Locinox SAKL QF | Adjustable Stainless Steel Keep | Square or Round Profiles

Product Overview The Locinox SAKL QF is an adjustable stainless steel keep designed for use with square or round gate profiles. This robust keep is suitable for a wide range of gate types, including garden, ornamental, and industrial gates. Featuring a unique Quick-Fix system, the SAKL QF ensures a fast and strong mounting. The adjustable aluminium stop plate with a rubber strip accommodates gate profiles from 40 to 60 mm in width, providing a secure and reliable fit. The design has been refined to make the strike accept the latchbolt more easily, enhancing its functionality. Key Features Stainless steel bolt receiver for durability Extruded aluminium stop plate with rubber strip Easy left or right changing Innovative Quick-Fix mounting for fast installation Adjustable for gate profiles from 40 to 60 mm width Suitable for both rectangular and round profiles Product Description Specifications Material: Stainless steel bolt receiver, aluminium stop plate Mounting: Quick-Fix system Adjustability: Fits gate profiles from 40 to 60 mm width Profile Compatibility: Suitable for rectangular and round profiles Stop Plate: Aluminium with rubber strip The Locinox SAKL QF adjustable keep is designed to provide a secure and reliable solution for a variety of gate types. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, combined with a rubber strip, enhances the keep's ability to securely hold the gate in place while minimizing noise and wear. The innovative Quick-Fix system simplifies the installation process, allowing for a fast and strong mounting without the need for extensive tools or expertise. The SAKL QF is adjustable to fit gate profiles from 40 to 60 mm in width, providing versatility and compatibility with a wide range of gate designs. Additionally, the keep is designed for easy left or right changing, further enhancing its adaptability. This keep is ideal for garden, ornamental, and industrial gates, offering a reliable and aesthetically pleasing solution. The refined design ensures that the strike accepts the latchbolt easily, providing a smooth and secure locking mechanism. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SDM4 | Hydraulic Damper for 4-Arm Turnstile (90°) | Progressive Damping

Product Overview The TURNITEC TT-SDM4 is a unique hydraulic damper designed specifically for 4-arm (90°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-SDM4 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system for 4-arm TURNITEC (90°) Continuous and progressive damping of the rotational movement Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-SDM4 Hydraulic Damper is designed to enhance the performance and safety of 4-arm (90°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, providing smooth and gradual movements and preventing the turnstile from hitting users' heels. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-SDM4 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-SDM4 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-DM3 | Hydraulic Damper for 3-Arm Turnstile (120°) | Progressive Damping

Product Overview The TURNITEC TT-DM3 is a unique hydraulic damper designed specifically for 3-arm (120°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-DM3 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system Continuous and progressive damping starting from 60° in the 3-arm version Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-DM3 Hydraulic Damper is designed to enhance the performance and safety of 3-arm (120°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, starting from 60° of rotation. This design allows for smooth and gradual movements, preventing the turnstile from hitting users' heels and ensuring a more comfortable passage. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-DM3 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-DM3 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SM4S | Base Mechanism for 4-Arm Turnstile (90°) | Modular, Rustproof

Product Overview The TT-SM4S TURNITEC Base Mechanism is a high-quality, modular solution for operating 4-arm (90°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-SM4S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-SM4S TURNITEC Base Mechanism offers a robust and flexible solution for 4-arm (90°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-SM4S is a practical choice for both new installations and upgrades. Installing the TT-SM4S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-SM4S a versatile and adaptable solution. Constructed from rustproof materials, the TT-SM4S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-SM4S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX TT-BM3S | TURNITEC Base Mechanism for 3-Arm Turnstile (120°)

Product Overview The TT-BM3S TURNITEC Base Mechanism is a high-quality, modular solution for operating 3-arm (120°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-BM3S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-BM3S TURNITEC Base Mechanism offers a robust and flexible solution for 3-arm (120°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-BM3S is a practical choice for both new installations and upgrades.   Specifications Materials: Rustproof construction for enhanced durability Mounting: Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm Protection: IP55 housing protects the mechanism against environmental factors Modularity: Expandable with mechanical and electromechanical locking modules and hydraulic damper Performance: Tested for 1 million movements to ensure reliability Installation and Usage Installing the TT-BM3S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-BM3S a versatile and adaptable solution. Durability and Protection Constructed from rustproof materials, the TT-BM3S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-BM3S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX MODULEC-SF | Surface Mounted Electric Strike | Forty, Fifty, Sixtylock

Product Overview The MODULEC-SF is a surface mounted electric strike designed for use with Forty, Fifty, and Sixtylock insert locks. This electric strike features a narrowed stop plate, making it ideal for various gate profiles. Its quick and easy installation is ensured by the patented Quick-Fix system, eliminating the need for drilling or laser-cutting the gate profile. The black anodized housing provides corrosion and scratch resistance, ensuring long-lasting durability. The MODULEC-SF is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), and can be connected to both 12V-24V AC/DC. Key Features Tested up to 500,000 movements Fast and easy fixing with Quick-Fix Resistance to pressure on the latch bolt: 300 kg Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm width Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Available in two colours: RAL 9005 & ALUM Product Description The MODULEC-SF surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Installation and Usage Installing the MODULEC-SF is straightforward with the Quick-Fix system, allowing for rapid and secure attachment to gate profiles. The electric strike is designed for easy left or right changing, providing flexibility in installation. Compatible with both 12V and 24V AC/DC power supplies, the MODULEC-SF is versatile and adaptable to different power setups. The adjustable gate profile width of 40-60 mm ensures compatibility with a range of gate designs. Durability and Protection The MODULEC-SF electric strike is built to withstand rigorous use, tested up to 500,000 movements. Its robust construction includes a black anodized aluminum housing that resists corrosion and scratching, ensuring longevity and reliability. The strike's resistance to 300 kg of pressure on the latch bolt provides added security, making it an excellent choice for high-security applications. Available in RAL 9005 and ALUM colors, the MODULEC-SF combines functionality with aesthetic versatility.

LOCINOX MODULEC-SH | Surface Mounted Electric Security Keep | 12V-24V AC/DC

Product Overview The MODULEC-SH is a surface mounted electric security keep designed to replace your SHKL keep with enhanced security features. It offers Fail Close and Fail Open functionalities, making it versatile for various security needs. Easy to install with the patented Quick-Fix system, this keep is suitable for 12V-24V AC/DC applications. The MODULEC-SH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), ensuring reliable performance in different scenarios. Key Features Tested up to 500,000 movements Resistance to pressure on the latch bolt: 300 kg Easy mounting with Quick-Fix Same drilling pattern as SA, SH, and SM keeps Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm depth Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Product Description Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Overview The MODULEC-SH electric security keep offers robust performance and enhanced security for various access control needs. Its ability to withstand a pressure resistance of 300 kg on the latch bolt ensures high durability and reliability. Available in both Fail Close (Emissa) and Fail Open (Ruptura) versions, the MODULEC-SH can be tailored to meet specific security requirements. The corrosion-resistant black anodized aluminum housing and easy left or right changing feature add to its versatility, making it suitable for a wide range of gate profiles. Installation and Usage Installing the MODULEC-SH is straightforward with the Quick-Fix system, designed for easy mounting on new or existing gates. The keep is compatible with gate profiles of 40-60 mm depth and follows the same drilling pattern as SA, SH, and SM keeps, ensuring a seamless replacement. The MODULEC-SH operates on 12V-24V AC/DC with a power consumption of 15W, making it energy efficient and effective for various applications. With its high durability and resistance to environmental factors, the MODULEC-SH is ideal for both indoor and outdoor use. Durability and Protection The MODULEC-SH is built to withstand harsh conditions with its corrosion-resistant black anodized aluminum housing. It has been tested for up to 500,000 movements, ensuring long-term reliability and performance. The keep's ability to withstand a pressure resistance of 300 kg on the latch bolt provides robust security, making it an excellent choice for high-security applications. Additionally, the Fail Close and Fail Open functionalities ensure the keep meets diverse security needs, providing flexibility and peace of mind.

LOCINOX SEH | Electric Strike for Insert Locks | 500kg Pulling Force

Product Overview The SEH Electric Strike is designed for use with H-Metal and H-Wood insert locks, providing a robust and reliable solution for access control. Equipped with a blocking system that withstands a pulling force of up to 500 kg, this electric strike ensures maximum security. The SEH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Its water-resistant and weatherproof design guarantees durability in different environmental conditions. Key Features Available in two versions: Emissa (Fail Close) and Ruptura (Fail Open) Easy left or right changing Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current for Emissa: 1A Current for Ruptura: 1.5A Water-resistant and weatherproof Pressure resistance on self-latching bolt: 500 kg Product Description The SEH Electric Strike is a highly durable and secure solution for access control in various settings. Its ability to withstand a pulling force of 500 kg makes it exceptionally strong and reliable. Available in both Fail Close and Fail Open versions, the SEH electric strike can be tailored to meet specific security requirements. The easy left or right changing feature enhances its versatility, while its compatibility with post profiles of 50 mm and more ensures broad applicability. Installation and Usage Installing the SEH electric strike is straightforward, thanks to its design for easy left or right changing. The strike is compatible with H-Metal and H-Wood insert locks, making it suitable for a variety of applications. It operates on 12V AC/DC, with the Emissa version requiring 1A and the Ruptura version requiring 1.5A. The water-resistant and weatherproof construction ensures reliable performance in various environmental conditions, making it ideal for both indoor and outdoor use. Durability and Protection The SEH electric strike is built to withstand harsh conditions, with a water-resistant and weatherproof design that ensures long-term durability. Its anodized aluminium housing protects against vandalism and environmental damage, while the stainless steel push buttons are designed to endure frequent use. The strike's ability to withstand a 500 kg pulling force provides robust security, making it an excellent choice for high-security applications.

KEY AUTOMATION EGO Columns EG50, EG100 | Photocells and Selectors | LED Lights

Product Overview The EGO Columns for photocells and selectors are designed to provide reliable and efficient lighting solutions for large areas. Made entirely of aluminum and available in heights of 500 mm and 1000 mm, these columns feature replaceable LED lights to ensure long-lasting performance. The integrated LED lights enhance visibility and security, making them ideal for various applications. Key Features LED lights to illuminate large areas Constructed entirely of aluminum Available heights: 500 mm, 1000 mm Replaceable LED lights Product Description Specifications SpecificationDetails Voltage 24-35 Vdc Color Rendering Index (CRI) >90 Color Temperature 3000K Luminous Flux 450lm - 900lm Protection Degree IP54 Models CodeDescription EG50 Support post h. 50 cm EG50L Support post h. 50 cm with integrated LED light (5W LED) EG100 Support post h. 100 cm EG100L Support post h. 100 cm with integrated LED light (10W LED) EG100A Support post h. 100 cm with accessory housing EG100LA Support post h. 100 cm with integrated LED light (10W LED) and accessory housing Additional Components CTLIGHT2: Voltage regulator for LED lights 24 Vdc, max 30W (mandatory for all control units except BOXLED control units) Dimensions Height: 500 mm or 1000 mm Usage Limits The performance values can be affected by environmental conditions and the installation setup.

DEA Ghost Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216 is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216 Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.

DEA Ghost 100 Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216GN is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216GN Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216GN. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.  

DEA BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws

BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws Fixing plate for LIVI/N batteries with screws. More information in downloads.    

DEA 460N V2 Adjustable fixing plate for LIVI/N

460N V2 Adjustable fixing plate for LIVI/N This is a adjustable fixing plate for LIVI/N operator. Check downloads for more useful information.  

DEA 451 External unlocking device with cable for REV (4.5m) - use with BLINDOS

451 External unlocking device with cable for REV (4.5m) - use with BLINDOS External unlocking device with cable for REV (4.5m).To be used with BLINDOS. More info in downloads.  

DEA BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable

BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable This BLINDOS PACK is a combination of BLINDOS and one of the following products: 450N, 451, GEKO/SF, 580M. All parts are available separately as well.  

DEA Galvanized Pinion for REV and GULLIVER Operators (M6, Z18/IB, Z22, Z15/IB)

Product Overview These high-quality galvanized pinions are designed for use with REV and GULLIVER operators. They ensure reliable performance and durability, making them ideal for various gate automation needs. Available in multiple sizes, these pinions are essential components for maintaining the smooth operation of your gate systems. Key Features Durable galvanized construction for long-lasting use Compatible with REV and GULLIVER operators Available in multiple sizes to suit different applications Ensures smooth and reliable gate operation Product Description The galvanized pinions for REV and GULLIVER operators are crafted to provide exceptional durability and performance. The robust construction ensures that they can withstand the demands of intensive gate operations. These pinions come in various sizes, allowing you to choose the perfect fit for your specific needs. The pinions are easy to install and help maintain the smooth functioning of your gate automation systems. Each pinion is designed to work seamlessly with REV and GULLIVER operators, ensuring compatibility and reliable performance. The galvanized finish offers excellent resistance to corrosion, enhancing the longevity of the pinions even in harsh weather conditions. Product Guide Product CodeProductSizeDescription 619090 PIGNONE Z22 REV Z=22 Oversized pinion Z=22 for REV 360674 PIGNONE Z15/IB REV M=4 Z=15 Øe=68 Galvanized pinion for IRONBOX M=4 Z=15 Øe=68 (REV/RF) 360673 PIGNONE Z18/IB REV M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 REV 360580 M6 M=6 Z=12 Øe=84 M=6 Z=12 Øe=84 GULLIVER galvanized gear 360412 PIGNONE Z18/IB GULLIVER M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 GULLIVER Note: When using an oversized pinion Z22, the maximum weight of the leaf should be reduced by 30%. Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA IRONBOX Vandal-proof Box for REV and GULLIVER with Magnetic Limit Switch and Foundation Plate (IRONBOX, IRONBOX/XS)

Product Overview The IRONBOX and IRONBOX/XS vandal-proof boxes are designed to protect sliding gate motors and their electronic components. Suitable for collective sliding gates (REV in the IB version) and industrial sliding gates (GULLIVER in the IB version), these boxes offer robust protection and an elegant design. The IRONBOX/XS is compact, making it ideal for installations with limited space or requiring a specific design aesthetic. Key Features Vandal-proof design made of steel Equipped with a magnetic limit switch for precise stopping Customized access key for added security Spacious interior for easy installation and maintenance Essential design for clean and tidy installations Product Description The IRONBOX series offers unparalleled protection for your gate automation systems. Made from painted steel, these boxes are designed to prevent tampering and vandalism, ensuring that your motors and electronic components remain safe. The customized access key adds an extra layer of security, making unauthorized access nearly impossible. Both IRONBOX and IRONBOX/XS come with a magnetic limit switch, which ensures accurate stopping during both opening and closing operations. The larger IRONBOX model provides ample working space for complex installations and maintenance, while the IRONBOX/XS is tailored for simpler installations with its compact size of only 36 cm wide, 60 cm high, and 22 cm deep. Installation is straightforward, with a significant working area in the IRONBOX and adequate room in the IRONBOX/XS for professional maneuvering during setup and maintenance. Both models include an internal fixing plate for organizing the control panel and electronic devices, ensuring a practical, fast, and orderly setup. Product Guide Product CodeProductDescription 619080 IRONBOX RAL 9006 painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 594 x 1002 x 280 mm (without pinion). 619100 IRONBOX/XS Painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 359 x 607 x 219 mm (without pinion). Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator Magnetic limit switch for IB version of Gulliver or REV operator  

DEA NET-BOX - The Device for Management of Your Remotes from Your Office (Radio Controls)

Product Overview The NET-BOX is the ultimate bench programmer designed to read, clone, and customize remote controls and control units for gates quickly and accurately. This device streamlines the management of your remote controls, making it a fast and error-proof operation, all from the convenience of your office. Key Features Create and activate pre-recorded virtual remote controls in the memory of the control unit or receiver Increase the security of remote controls by setting a customized encryption key Read the features of a DEA remote control and transfer them to a new one Clone the features of a remote control in series for fixed code transmission systems Replace a stolen or lost remote control safely by creating a new one that eliminates the old one Program DE@NET control units conveniently on the bench by transferring preset data from DEAcloud Product Description The NET-BOX offers a comprehensive solution for managing remote controls for gate automation systems. With its advanced features, you can easily create and activate virtual remote controls, ensuring they are securely stored in the memory of your control units or receivers. Enhance the security of your system by setting customized encryption keys for your remote controls. The NET-BOX makes it simple to read the features of an existing DEA remote control and transfer them to a new one, or clone these features in series for systems using fixed code transmission. In case of a lost or stolen remote, the NET-BOX allows you to generate a new remote that invalidates the old one, providing peace of mind and maintaining security. Additionally, the NET-BOX facilitates the programming of DE@NET control units by transferring data from DEAcloud directly to the control unit, simplifying the setup process for new installations. Note Each NET-BOX device includes 1 pc GT-CABLE for easy connection and setup. Product Guide Product CodeProductDescription NET-BOX Device Device for management, cloning, and customization of remote controls and control units. Includes 1 pc GT-CABLE. Accessories GT-CABLE DEAcloud Subscription Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-COM - Device for Installation, Maintenance, Remote Management, and Diagnostics

Product Overview The NET-COM device is designed for the installation, maintenance, remote management, and diagnostics of automation systems. Located inside the installation, NET-COM allows for advanced remote control and management of DE@NET control boards, making it a powerful tool for automation professionals. Key Features Remote control and management of DE@NET control boards Check system functionality and read/modify installation parameters Consult the event register recorded by the control board Manage up to 1,500 remote controls Set programmed automatic opening and closing times with an annual calendar Open the gate telephonically (after enabling) Compatible with any brand of control boards Smartphone access via DEAuser app Product Description The NET-COM device is an essential tool for automation professionals, allowing for the remote management and diagnostics of DE@NET control boards. With NET-COM, you can manage installations from the office, ensuring the correct functioning of the system, reading and modifying installation parameters, and consulting the event register recorded by the control board. NET-COM acts as an interactive receiver that monitors and manages accesses. It can handle up to 1,500 remote controls, allowing you to select time slots and consult the access register. You can also set programmed automatic opening and closing times with an annual calendar and open the gate telephonically after enabling this feature. One of the standout features of NET-COM is its compatibility with any brand of control boards, allowing you to take full advantage of all receiver features. Additionally, with the DEAuser app, you can control the gate with your smartphone, eliminating the need for keys or access codes. If you have installed NET-COM with a data SIM card, you can even check the status of the automation remotely, fine-tune the automatic opening and closing times, and check the access register via remote control. The NET-COM/S version includes a DEA SIM card with prepaid connectivity service for 5 years, providing an all-in-one solution for remote management and diagnostics. Attention GSM remote connectivity is available only in European countries that support 2G technology. Supplied without a SIM (M2M). Possibility of using a SIM supplied by other operators. Product Guide Product CodeProductDescription NET-COM Device Device for installation, maintenance, remote management, and diagnostics of automation systems. NET-COM/S Device with SIM Includes DEA SIM card with prepaid connectivity service for 5 years. Accessories DEA SIM Card Additional Remote Controls Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-EXPANSION - DE@NET Expansion Board for Control Boards NET Series

Product Overview The NET-EXPANSION board is designed to enhance the functionality of DE@NET control boards in the NET Series. Available in three versions, this expansion board offers additional inputs and outputs to support various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. It ensures seamless integration with compatible DE@NET boards. Key Features 6 inputs and 8 outputs for NET Series control boards Analog or resistive inputs Traffic light control Compass control Alarm contact with automatic closing on power failure Open gate warning light with variable frequency during opening/closing Compatible with NET230N, NET24N (from version 30), NET724N (from version 1), and NET724N/XL Product Description The NET-EXPANSION board enhances DE@NET control boards by providing additional inputs and outputs. It supports various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. The board also includes an open gate warning light with variable frequency during opening and closing. The expansion board is compatible with DE@NET boards that have a serial port, including NET230N and NET24N from version 30, NET724N from version 1, and NET724N/XL. This ensures seamless integration and enhanced functionality for your control systems. Product Variants Product CodeProductDescription 677620 NET-EXPANSION Expansion board with 6 inputs and 8 outputs for control boards NET Series. Includes features like analog or resistive inputs, traffic light control, compass control, alarm contact with automatic closing on power failure, and open gate warning light with variable frequency during opening/closing. Cable length 300mm + spacers. 677622 NET-EXPANSION MINI Mini expansion board with 4 resistive inputs and 1 NC-NO output, compatible only with NET230N and NET24N. Compatibility The NET-EXPANSION board is compatible with the following DE@NET control boards: NET230N (from version 30) NET24N (from version 30) NET724N (from version 1) NET724N/XL Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing control systems before installation.

DEA LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection

Product Overview The LOOP230 loop detector is a magnetic device designed to detect the presence of metal masses, such as vehicles, in a specific passage. When a metal mass is detected, the detector sends a command to the control unit, enabling automated systems like barriers to operate efficiently. Available in both 1-channel and 2-channel versions, the LOOP230 offers flexible solutions for various applications. Key Features Magnetic loop detector for vehicle detection. Available in 1-channel (LOOP230/1) and 2-channel (LOOP230/2) versions. Detects metal masses like cars and motorcycles. Sends commands to control units for automated operation. 2-channel version allows connection of two loops for enhanced control. Ideal for controlling entry and exit barriers or providing multiple commands to the same automation. Product Description LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection The LOOP230 loop detector is an essential component for automated systems that require vehicle detection. By connecting a magnetic loop, the device can detect the presence of metal masses and send appropriate commands to the control unit, ensuring smooth and efficient operation of barriers and other automated controls. Product Variants ProductDescription LOOP230/1 Loop detector, 1 channel. LOOP230/2 Loop detector, 2 channels. The 2-channel version of the LOOP230 allows the connection of two loops, providing the ability to control two separate but close automations (such as two opposite barriers for vehicle entry and exit) or to issue two commands to the same automation (such as opening before a vehicle passes and closing after it). This flexibility makes the LOOP230 an ideal solution for various automated systems that require precise and reliable vehicle detection and control.

DEA KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke

KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke This item is to be used with following DEA range: DEA OLI  

DEA OLI/SFR Adjustable fixing plates to be screwed

OLI/SFR Adjustable fixing plates to be screwed This item is to be used with following DEA range: DEA OLI  

DEA MAC-LOOK/P Extension for MAC, STING and LOOK rams

MAC-LOOK/P Extension for MAC, STING and LOOK rams This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK

DEA KIT KEY MAC/LOOK Unlocking key for MAC and LOOK ranges (5 pcs)

KIT KEY MAC/LOOK Unlocking key for MAC, LOOK (5 pcs) This item is to be used with following DEA ranges: DEA MAC DEA LOOK  

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke This item is to be used with LOOK DEA range.  

ROGER TECHNOLOGY B71/PBX | Hybrid Inverter | Powerbox Battery Charger and Solar Panel Function

Product Overview The B71/PBX Hybrid Inverter is a versatile power solution designed to provide seamless power for automation systems. It integrates a Powerbox battery charger and solar panel function, making it ideal for various applications requiring reliable and efficient power management. Key Features Hybrid inverter with Powerbox battery charger Supports connection to solar panels Available in "Network Assisted" and "Full Solar" versions Efficiently powers 36V DC brushless digital controllers 230V AC mains voltage support (Network Assisted version) Compact and robust design Product Description The B71/PBX Hybrid Inverter is designed to cater to the power needs of modern automation systems. It is available in two versions: Network Assisted Version (B71/PBX36/BOX): This version operates with a 230V AC mains voltage and provides a hybrid inverter solution for powering automation systems. It includes a battery charger function that can connect to both solar panels and the mains supply, ensuring uninterrupted power for 36V DC brushless digital controllers. Full Solar Version (B71/PBX/BOX): This version is dedicated to fully solar-powered automation systems. It provides a battery charger function solely through the connection to solar panels, making it an ideal solution for remote or off-grid applications. Specifications Product CodeVersionMains VoltageDescription B71/PBX36/BOX Network Assisted 230V AC Hybrid inverter, “Network Assisted” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels or mains supply for powering the 36V DC brushless digital controllers with a mains voltage of 230V AC. B71/PBX/BOX Full Solar / Hybrid inverter, “Full Solar” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels for powering the brushless digital controllers. The B71/PBX Hybrid Inverter is designed to ensure that your automation systems run smoothly, whether you are connected to the grid or relying solely on solar power. Its compact and robust design makes it a reliable choice for various environments. Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing automation systems and power requirements before installation.

PROCON ELECTRONICS PROCON LD-100 / LD-102 | Induction Loop Controller and Loop Detector | Single Channel (230V/24V)

Product Overview The PROCON LD-100/LD-102 is a single channel induction loop controller and detector designed for parking and access control applications. This reliable and efficient detector is connected to an inductive loop mounted in the road surface, which activates the detector when vehicles pass over it, switching on an output. Key Features Single channel induction loop detector for parking and access control Compatible with most single channel detectors on the market Easy to set-up and install Utilizes microprocessor and surface mount technology Compact design with a large number of functions 2-year guarantee for peace of mind Product Description The PROCON LD-100/LD-102 induction loop controller is an ideal solution for parking and access control applications, offering reliable performance and ease of installation. When connected to an inductive loop installed in the road surface, the detector activates an output when vehicles pass over the loop. This functionality makes it a perfect choice for managing vehicle access and parking systems. The LD-100/LD-102 uses advanced microprocessor and surface mount technology to pack numerous functions into a compact package. This ensures compatibility with most single channel detectors available on the market, making it a versatile addition to your access control system. Installation and setup are straightforward, allowing for quick deployment in various environments. With a 2-year guarantee, you can trust in the durability and reliability of the PROCON LD-100/LD-102. Technical Specifications Model: LD-100 / LD-102 Type: Single channel inductive loop detector Power Supply: 230V / 24V Compatibility: Compatible with most single channel detectors Technology: Microprocessor and surface mount technology Installation: Easy to set up and install Warranty: 2-year guarantee Recommendation It is recommended to use one loop detector per separate entrance or exit to ensure optimal performance and reliability in your parking and access control systems.

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

BFT SFR-B Standard Stroke Post Bracket

SFR-B STANDARD STROKE POST BRACKET Adjustable non-weld bracket for standard stroke motors

BFT SFR-B-L Long Stroke Post Bracket

SFR-B-L LONG STROKE POST BRACKET Adjustable non-weld bracket for long stroke motors.    

ROGER TECHNOLOGY H70/200AC/BOX Control Board | Swing Gate Automation | 230V AC

Product Overview The H70/200AC/BOX Control Board is a highly advanced solution for swing gate automation. Designed to handle two asynchronous monophase motors, this control board offers versatile programming options and robust power capabilities, making it ideal for a wide range of gate automation applications. With an IP54 protection level and the ability to operate in temperatures ranging from -10 to +55°C, the H70/200AC/BOX is built for durability and reliable performance. Key Features Supports swing gate automation for up to two motors Operates on 230V AC +/- 10% 50 Hz power supply IP54 protection level for robust durability Advanced programmable features for each output Inputs for safety rib edges NC and 8k2 Specifications SpecificationDetails Power 230V AC +/- 10% 50 Hz Protection Level IP54 Operating Temperature -10 to +55°C Max Flashing Light Charge 40W (12-230V AC/DC) Number of Motors Activated 2 asynchronous monophase Max Power per Motor 600W 230V AC Max Courtesy Light Charge 100W (12-230V AC/DC) Max Power Gate Open Light 2W 24V AC Max Voltage Accessories Output 350mA 24V AC (500mA 24V DC) Advanced Mode Features The H70/200AC/BOX control board offers an advanced mode that unlocks a wide range of programmable features. This allows for the configuration of each output to meet specific operational needs, providing flexibility and customization for various gate automation scenarios. Safety Features Equipped with inputs for safety rib edges NC and 8k2, the H70/200AC/BOX ensures enhanced safety for automated gate operations. These safety features help prevent accidents and ensure secure operation. Applications This control board is ideal for residential and commercial swing gate automation, providing reliable and customizable control for up to two motors. Its advanced features and robust design make it suitable for a wide range of gate automation projects.

LOCINOX PUMA Compact | 2-Way Adjustable 180° Surface Mounted Hinge

Product Overview The PUMA Compact 2-way adjustable 180° surface mounted hinge is designed to provide flexible and reliable support for residential gates. Featuring a powder coated aluminium housing, this compact hinge offers a 180° opening angle with both vertical and horizontal adjustability. The Quick-Fix fastening system ensures easy installation without the need for welding, making it an ideal choice for gates up to 1 metre wide and 60 kg. Key Features 180° opening and closing angle 2-way adjustability: vertical (20 mm) and horizontal (15 mm) Powder coated aluminium housing Stainless steel hinge axle for resistance to extreme weather conditions Supports gates up to 1 metre wide and 60 kg Suitable for left and right opening gates Aesthetic design for aluminium and smaller residential gates Easy mounting with Quick-Fix system, no welding needed Product Description The PUMA Compact hinge is a versatile and aesthetically pleasing surface mounted hinge designed for residential gates. Its 180° opening angle and 2-way adjustability make it highly flexible, allowing for both vertical and horizontal adjustments. This feature ensures a perfect fit for gates up to 1 metre wide and 60 kg. The hinge is constructed with a powder coated aluminium housing, providing a durable and weather-resistant finish. The stainless steel hinge axle enhances its resistance to extreme weather conditions, ensuring long-lasting performance. The PUMA Compact hinge is suitable for both left and right opening gates, making it a versatile choice for various installations. The Quick-Fix fastening system simplifies the installation process, eliminating the need for welding. This makes the PUMA Compact hinge easy to mount, saving time and effort during setup. Its compact design and aesthetic appeal make it an excellent choice for aluminium and smaller residential gates, seamlessly blending with modern gate designs. Specifications 180° opening and closing angle 20 mm vertical adjustability 15 mm width adjustability Powder coated aluminium housing Stainless steel hinge axle Supports gates up to 1 metre wide and 60 kg Suitable for left and right opening gates Easy mounting with Quick-Fix system RAL Colour Availability The PUMA Compact hinge is available in various RAL colours to match different gate finishes. Drawing Please refer to the product drawing for detailed dimensions and installation guidelines. Note: Images may differ from the actual product. What's in the Box 1 x PUMA Compact 2-way adjustable 180° surface mounted hinge Installation instructions All necessary mounting hardware     NOTE: Images may differ from the actual product  

ROGER TECHNOLOGY SYNUS/2 Dual Code Transmitter | Fixed & Rolling Code | 433.92 MHz

Product Overview The SYNUS/2 dual code transmitter is a versatile remote control device that operates at a frequency of 433.92 MHz. It offers the flexibility of both fixed code and rolling code modalities, making it suitable for a wide range of applications. With 2 channels and a built-in radio for copying fixed codes, this transmitter ensures reliable and secure operation. Key Features Dual code modality: Fixed code or Rolling code Operating frequency: 433.92 MHz 2 channels Radio for copying fixed codes Maximum open field range: 150 meters Compact and lightweight design Specifications FeatureSpecification Standard Power 3V DC Absorption 8mA Operating Temperature -10 to +55 °C Number of Channels 2 Codification Fix code or Rolling Code Modulation AM/ASK Carrier Frequency 433.92 MHz Number of Combinations 65,536 (Fix code) - 4,294,967,296 (Rolling code) Types of Fixed Codes Clonable MANCHESTER, PCM, Max. 64bit Number of Bits (Identification Code) 16 (Fix code) - 32 (Rolling code) Number of Bits Transmitted 28 (Fix code) - 144 (Rolling code) Radio for Copy Yes (only fixed code) Maximum Distance in Open Field 150 meters Battery Mod "CR2032" 3V Dimensions (L x W x H in mm) 38 x 68 x 11 Product Weight Packed (Kg) 0.04 Applications The SYNUS/2 dual code transmitter is ideal for use in residential, commercial, and industrial environments where secure and reliable remote control is required. Its ability to operate in both fixed and rolling code modes ensures compatibility with various systems and enhances security. Ordering Information For more information or to place an order, please contact our sales team or visit our website.

DEA Foundation box for Ghost Motors

215 - Foundation box for Ghost Motors    

DEA 560F-960F - Limit switches set for LIVI 502

560F-960F - Limit switches set for LIVI 502 Limit switch set to be used on LIVI 502 swing gates operator.  

Roger Technology H93/RX20/I | Plug-in Receiver | 2 Channels, 433.92 MHz

Product Overview The H93/RX20/I is a plug-in receiver designed for use with control unit series H70, B70, EDGE, and CTRL. It operates on a standard power of 5V DC and features 2 channels, making it ideal for various gate automation applications. With its fix code modulation and AM/ASK carrier frequency of 433.92 MHz, this receiver ensures reliable performance and secure communication. Key Features Standard power: 5V DC Absorption: 15mA Operating temperature: -10°C to +55°C Number of channels: 2 Codification: Fix code Modulation: AM/ASK Carried frequency: 433.92 MHz Exit: Open collector Storable codes: 50 Sensibility: -107 dBm Input impedance: 50 Ω Maximum dimensions (L x W x H): 34 x 31 x 12 mm Product weight packed: 0.02 kg Product Description The H93/RX20/I plug-in receiver by Roger Technology is engineered for seamless integration with control units in the H70, B70, EDGE, and CTRL series. Operating on a 5V DC power supply with a low absorption of 15mA, this receiver is energy-efficient and suitable for continuous use in gate automation systems. It features 2 channels and supports fix code codification, providing a secure and reliable connection with a modulation of AM/ASK at a carried frequency of 433.92 MHz. The receiver has a high sensitivity of -107 dBm and an input impedance of 50 Ω, ensuring effective signal reception and transmission. The compact design of the H93/RX20/I, with dimensions of 34 x 31 x 12 mm and a weight of 0.02 kg when packed, allows for easy installation and integration into existing systems. It can store up to 50 codes, making it versatile and suitable for various applications in gate automation. Technical Support Enhance your gate automation system with the H93/RX20/I plug-in receiver. For more details or to make a purchase, contact us today. Our team is ready to assist you with any inquiries.

LOCINOX SE Electric Strike for Swing Gates | 500 kg Pulling Force | Fail Close/Open

Product Overview The SE Electric Strike for swing gates is designed to provide robust and reliable access control. This electric strike can withstand a pulling force of 500 kg, ensuring high security. The deadbolt receiver is reinforced with stainless steel, enhancing its durability and strength. The SE Electric Strike is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Key Features Withstands 500 kg pulling force Reinforced stainless steel deadbolt receiver Available in Fail Close (Emissa) and Fail Open (Ruptura) versions Water resistant and weatherproof Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current Emissa: 1A Current Ruptura: 1.5A Specifications SpecificationDetails Type SE.E Emissa - Fail Close Type SE.R Ruptura - Fail Open Deadbolt Receiver Reinforced stainless steel Post Profiles 50 mm and more Voltage 12V AC/DC Current (Emissa) 1A Current (Ruptura) 1.5A Pressure Resistance 500 kg Water Resistance Yes Weatherproof Yes RAL Colour Availability The SE Electric Strike is available in a variety of RAL colors to match your gate and enhance its appearance. Please contact us for more information on available colors. Technical Drawings Technical drawings of the SE Electric Strike are available upon request. These drawings provide detailed dimensions and installation instructions to ensure proper fitting and functionality. Additional Information For further inquiries or additional information regarding the SE Electric Strike for swing gates, please contact us. Our team is ready to assist you with any questions or support you may need.   DRAWING  

ROGER TECHNOLOGY B73/EXP - EXPANSION CARD FOR CTRL AND CTRL/P

Roger Technology AG/EXP Signal Status Board, 2 Output, AGILIK-BIONIK Series B73/EXP - EXPANSION CARD FOR CTRL AND CTRL/P

ROGER TECHNOLOGY B71/BCHP/EXT Batteries Charger Kit | Emergency Charger for Brushless Digital Controller EDGE1/BOX - B70/1DCHP 36V DC

Product Overview The B71/BCHP/EXT Kit is an emergency battery charger designed for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BCHP/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.2 Kg Product Description The B71/BCHP/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller EDGE1/BOX - B70/1DCHP 36V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BCHP/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current 400 mA Product Weight (Packed) 5.2 Kg Installation and Usage The B71/BCHP/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller EDGE1/BOX - B70/1DCHP remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BCHP/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/EXT Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/EXT Kit is an emergency battery charger designed for the Brushless digital controller B70/2DC/BOX 24V DC. This comprehensive kit includes a plug-in card, two 12V DC 4.5 Ah recovery batteries connected in series, and a robust box case. The B71/BC/EXT ensures your system remains operational during power outages, providing reliability and peace of mind. The kit supports various power line supplies and offers efficient charging options to meet your emergency power needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Includes plug-in card and two 12V DC 4.5 Ah lead-acid batteries connected in series Box case included for protection and organization Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC 400 mA charge current for fast charging Product weight packed: 5.6 Kg Product Description The B71/BC/EXT Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit includes a plug-in card, two 12V DC 4.5 Ah lead-acid recovery batteries connected in series, and a durable box case to protect and organize the components. The charger supports a power line supply range of 16V AC to 24V AC and operates effectively in temperatures from -20°C to +55°C. With a maximum input power of 15W, the charger ensures your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The 400 mA charge current facilitates fast charging, making the B71/BC/EXT an ideal solution for maintaining power in emergency situations. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Lead-Acid Batteries 2 x 12V DC 4500mAh, connected in series Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br close jumper) 400 mA Product Weight (Packed) 5.6 Kg Installation and Usage The B71/BC/EXT Kit is straightforward to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Simply follow the included instructions to connect the charger to your existing system. The robust box case provides protection and organization for the components, ensuring reliable performance in emergency situations. Additional Information For more details on the B71/BC/EXT Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

ROGER TECHNOLOGY B71/BC/BOX Kit | Emergency Battery Charger for Brushless Digital Controller B70/2DC/BOX 24V DC

Product Overview The B71/BC/BOX Kit is an emergency battery charger designed for use with the Brushless digital controller B70/2DC/BOX 24V DC. This robust and efficient charging solution ensures your system remains operational during power outages, providing peace of mind and reliability. The kit supports various power line supplies and offers flexible charging options to meet your needs. Key Features Designed for Brushless digital controller B70/2DC/BOX 24V DC Supports power line supply from 16V AC to 24V AC Operates in temperatures ranging from -20°C to +55°C Maximum input power of 15W Nominal charge voltage of 27.6 V DC Minimum self-protection voltage of battery at 19.5 V DC Adjustable charge current options Compact dimensions: 243mm x 49mm x 89mm Lightweight: 0.5 Kg Product Description The B71/BC/BOX Kit provides a reliable and efficient emergency battery charging solution for the Brushless digital controller B70/2DC/BOX 24V DC. The kit is designed to support power line supplies ranging from 16V AC to 24V AC and operates effectively in a wide temperature range of -20°C to +55°C. With a maximum input power of 15W, the charger ensures that your batteries are charged efficiently and safely. This emergency charger kit features a nominal charge voltage of 27.6 V DC and a minimum self-protection voltage of 19.5 V DC, ensuring optimal battery maintenance and longevity. The adjustable charge current options, 250 mA for standard charging and 400 mA for fast charging (with the B71/BC/EXT option), provide flexibility to meet different battery capacities and charging needs. Specifications Power Line Supply 16V AC … 24V AC Operating Temperature -20°C +55°C Maximum Input Power 15W Nominal Charge Voltage 27.6 V DC Minimum Self-Protection Voltage 19.5 V DC Charge Current (br open jumper) 250 mA (for 1200mAh batteries) Charge Current (br close jumper) 400 mA (optional, for fast charge of 4500mAh batteries) - B71/BC/EXT Dimensions (L x W x H) 243mm x 49mm x 89mm Product Weight (Packed) 0.5 Kg Installation and Usage The B71/BC/BOX Kit is easy to install and use, ensuring your Brushless digital controller B70/2DC/BOX remains powered during emergencies. Follow the included instructions to connect the charger to your existing system, and choose the appropriate charge current based on your battery capacity. For fast charging, use the B71/BC/EXT option to increase the charge current to 400 mA for larger batteries. Additional Information For more details on the B71/BC/BOX Kit or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.

Roger Technology Brushless B70/1DCHP Control Board | 36V Heavy-Duty, High-Speed

Product Overview The Roger Technology Brushless B70/1DCHP Control Board is a high-performance 36V control board specifically designed for heavy-duty and high-speed sliding gate applications. Featuring a digital encoder, this control board ensures precise and reliable operation, making it ideal for demanding residential and commercial environments. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 36V control board designed for heavy-duty and high-speed sliding gates Brushless technology for enhanced efficiency and durability Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various high-demand applications Product Description The Roger Technology Brushless B70/1DCHP Control Board is engineered to deliver superior performance for heavy-duty and high-speed sliding gates. This 36V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement, even in demanding conditions. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use in high-demand settings. Specifications Control Board Type Brushless Voltage 36V Application Heavy-duty and high-speed sliding gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DCHP Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling heavy-duty and high-speed sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DCHP Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

Roger Technology Brushless B70/1DC Control Board | 24V Control with Digital Encoder

Product Overview The Roger Technology Brushless B70/1DC Control Board is a state-of-the-art 24V control board designed specifically for sliding gates. Equipped with a digital encoder, this control board ensures precise and reliable operation, making it an ideal choice for both residential and commercial applications. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 24V control board designed for sliding gates Brushless technology for enhanced efficiency Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various applications Product Description The Roger Technology Brushless B70/1DC Control Board is engineered to deliver superior performance for sliding gates. This 24V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use. Specifications Control Board Type Brushless Voltage 24V Application Sliding Gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DC Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DC Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

DEA BLINDOS Aluminium safety enclosure, with European cylinder, ready for unlocking device by cable

BLINDOS Aluminium safety enclosure, with European cylinder, ready for unlocking device by cable To be used in combination with following products: 450N, 451, GEKO/SF, 560M, 580M, 721/AB, LATO/SF and 550PL/SF. Pack version BLINDOS + product is available here (click). 

DEA SB Back overhead door fixing plate for LOOK, MAC, STING

SB Back overhead door fixing plate for LOOK, MAC, STING This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK

DEA NET-NODE 2.0 Device for DE@NET Control Boards and External Receivers

Product Overview The NET-NODE 2.0 is a versatile device designed to facilitate seamless communication between DE@NET control boards and external receivers. It enables the integration of smart technology into your gate automation system, allowing you to program and control your gates directly from your smartphone using the DEAinstaller and DEAuser apps. Key Features Smart Electronics: NET-NODE allows the use of the DEAinstaller app to program the parameters of DE@NET control boards and store them securely on the DEAcloud. Your data will always be updated and available for consultation anytime, anywhere. Smartphone Control: Use the DEAuser app to control your gate with your smartphone, eliminating the need for keys or remembering access codes. Easy Integration: NET-NODE seamlessly integrates with DE@NET control boards and external receivers, enhancing the functionality of your gate automation system. Secure and Reliable: Ensures that your automation system is secure, with data stored safely on DEAcloud for easy access and management. Specifications Device: NET-NODE 2.0 Compatibility: DE@NET control boards and external receivers Apps: DEAinstaller, DEAuser Data Storage: DEAcloud Applications Programming DE@NET control boards via DEAinstaller app Controlling gates and automation systems via DEAuser app Secure data storage and management on DEAcloud For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

DEA 5M Unlocking Device by Wire (BLINDOS or LATOM) 550PL/SF

5M unlocking device by wire (to be used with art. LATOM or BLINDOS).

DEA Half European Cylinder M

Half European Cylinder.

DEA Double European Cylinder D

Double European Cylinder.

Vertical Electric Lock with Ground Selvage 110V DEA

Vertical electric lock (without European Cylinder) with ground selvage.

DEA AURA/N - LED flashing light, multi-voltage (24AC-DC/120AC/230AC), with antenna (433MHz/868MHz)

AURA/N - LED flashing light, multi-voltage (24AC-DC/120AC/230AC), with antenna (433MHz/868MHz) LED flashing light, multi-voltage 24AC-DC /120AC/230AC, with integrated antenna 433MHz/868MHz Cable L=5m

DEA Side Fixing Plate (Included in Motor) LE

Side Fixing Plate (Included in Motor).

DEA LBA25 Extensions for Shafts D=25.4MM

Extensions for Shafts D=25.4MM.

DEA Adapter for Shafts D=40MM LBA40

Adapter for Shafts D=40MM.

DEA Pinion Z=19 + Shaft Extension LAC19

Pinion Z=19 + Shaft Extension.

DEA Pinion Z=19 + Groove Wedge L19

Pinion Z=19 + Groove Wedge.

DEA 25M Chain for Manual Manoeuvre - LATO Accessory CG

25M Chain for Manual Manoeuvre - LATO Accessory.

DEA Chain Anchoring Brackets 800C/F

800C/F Chain Anchoring Brackets.

DEA Chain Tightener 800C/TEN

800C/TEN Chain Tightener.

DEA GHOST 200 Replacement Chain Kit 16B-1X26P

DEA GHOST 200 Replacement Chain Kit16B-1X26P

DEA 230V Operator LATO220NET - Automation for Industrial Sectional Doors

LATO Operator - 230V, with encoder, 12Kg - control board NET230N included.

DEA KIT TEO700 for Sectional Doors

Kit TEO 700 complete with steel track and chain. L = 3300mm (1pcs) and 1 art. GT2 transmitter.

DEA Battery Set for ADVANCE / SPACE BAT/ADV

Battery set for ADVANCE / SPACE.

DEA Unlocking Device by Cable with Lock 762C

Unlocking a device by cable with a lock.

DEA Unlocking Device by Cable Complete with Hole Cover Lock 761C

Unlocking a device by cable complete with hole cover lock.

DEA 723 Arm Adaptor for Sectional Doors

Arm adaptor for sectional doors.

DEA Arm to be Used with Counterweight Doors 722

Arm to be used with counterweight doors.

DEA 721/AB Unlocking Device by Cable 4M

Unlocking a device by cable (4M) to be used with art. BLINDOS.

DEA AB/BRACKET Fixing Plate Set for Track

Fixing plate set for the track.

DEA Set for External Unlocking Device 960K*

Set for unlocking device (to be connected to the handle).

DEA Hole Cover with Key for External Unlocking 960C

Hole Cover with Key for External Unlocking.

DEA 954V Splined Bushing - 300mm

Splined busing L=300mm (to be screwed).

DEA Fixing Plate - 2000mm 953NL

Fixing Plate - 2000mm.

DEA 953N Fixing Plate - 1300MM

Fixing Plate - 1300MM.

DEA Fixing Plate - 675mm 953C

Fixing Plate - 675mm.

DEA Pair of Pipes with Bushing 952BL

Pair of pipes with bushing. L=2000mm (for central mounting).

DEA Telescopic Bent Arm to be Screwed 951V dx

Telescopic bent arm to be screwed (right side).

DEA Telescopic Bent Arm to be Welded 951

Telescopic bent arm to be welded (profile 40x10mm).

DEA Telescopic Reinforced Straight Arm to be Screwed

telescopic reinforced straight arm to be screwed - Right and left.

DEA Telescopic Straight Arm 950V

Telescopic straight arm to be screwed, right and left.

DEA Galvanised Steel Telescopic Arm with 50mm Splined Bushing 950BS

Galvanised steel telescopic arm with 50mm splined bushing.

DEA Reinforced Galvanised Steel Telescopic Arm with Splined Bushing 560BT

Reinforced galvanized steel telescopic arm with splined bushing.

DEA 580M - External unlocking device by cable (4,5m) to be used with BLINDOS

580M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 580M + BLINDOS is available here (click).

DEA 580L/580V | Mounting Plate for ANGOLO (Horizontal or Vertical)

Product Overview The 580L/580V mounting plates are designed for the ANGOLO operator, providing versatile installation options to suit your specific needs. Choose between the 580L horizontal mounting plate for fastening the operator parallel to the gate, or the 580V vertical mounting plate for perpendicular installation. These mounting plates ensure secure and efficient installation of your ANGOLO operator. Product Guide CodeProductDescription 381070 580L Horizontal mounting plate (fastening of operator parallel to the gate) 381060 580V Vertical mounting plate (fastening of operator perpendicularly to the gate) Key Features 580L Horizontal Mounting Plate: Ideal for securing the operator parallel to the gate for a streamlined installation. 580V Vertical Mounting Plate: Perfect for fastening the operator perpendicularly to the gate, providing flexibility in installation. Durable Construction: Both mounting plates are built to ensure secure and long-lasting installation of your ANGOLO operator. For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

DEA SD502 - Junction box

SD502 - Junction box This product is to be used with LIVI 502.  

DEA 560P - Vertical fixing plate (fastening of operator perpendicularly to the gate)

560P - Vertical fixing plate (fastening of operator perpendicularly to the gate) This product is to be used with LIVI 502.

DEA 560M - external unlocking device by cable (4,5m) to be used with BLINDOS

560M - external unlocking device by cable (4,5m) to be used with BLINDOS Pack version 560M + BLINDOS is available here (click).  

DEA 560 Articulated Arms for LIVI 502 | Aluminum & Galvanized Steel Options

Product Overview The 560 Articulated Arms for LIVI 502 are designed to enhance the functionality and versatility of the LIVI 502 automation system. These arms are available in a variety of materials and configurations to suit different installation needs. Whether you require aluminum or galvanized steel, sliding or painted options, the 560 series offers a robust solution for your gate automation requirements. Key Features Compatible with LIVI 502 automation system Available in aluminum and galvanized steel Options for both left and right side installations Durable construction for long-lasting performance Various configurations to meet specific needs Product Description The 560 Articulated Arms for LIVI 502 are specifically engineered to provide reliable and efficient operation for swing gates. These arms are essential components for the LIVI 502 automation system, offering flexibility and durability to accommodate various gate setups. The range includes different types of arms to ensure that you can find the perfect match for your specific installation requirements. Product Guide CodeProductDescription 629130 560A Aluminum articulated arm 629110 560BD Galvanized steel rail sliding arm, right side (L. 800 mm) 629120 560BS Galvanized steel rail sliding arm, left side (L. 800 mm) 629140 560BV Painted galvanized steel articulated arm Detailed Descriptions 560A - Aluminum Articulated Arm: Lightweight and durable, this arm is designed for easy installation and reliable performance. 560BD - Galvanized Steel Rail Sliding Arm (Right Side): This right-side sliding arm, made of galvanized steel, offers enhanced corrosion resistance and strength, measuring 800 mm in length. 560BS - Galvanized Steel Rail Sliding Arm (Left Side): Similar to the 560BD, this left-side sliding arm is also 800 mm long and provides the same durability and corrosion resistance. 560BV - Painted Galvanized Steel Articulated Arm: This painted version of the galvanized steel arm combines aesthetic appeal with robust performance, ensuring long-lasting use. What's in the Box 560 Articulated Arm (specific type based on order) Mounting hardware Installation instructions For more information or to explore our full range of products, please visit our website or contact our customer service team.

DEA KIT KEY GEKO - GEKO unlocking key (5 pcs)

KIT KEY GEKO - GEKO unlocking key (5 pcs) Unlocking key to be used on GEKO, comes in package of 5.  

DEA KIT CLIMB - Adapter set for gates on incline. For gates up to 2m - 150 kg; max gradient 12%

KIT CLIMB - Adapter set for gates on slopes. For gates up to 2m - 150 kg; max gradient 12% Kit Climb allows you to install on a slope with a gradient up to 12%. It can be used on gates up to 2 meters and 150 kg. It is suitable for GEKO and LIVI 502 operators.

DEA GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS

GEKO/SF - External unlocking device by cable (4,5m) to be used with BLINDOS Pack version GEKO/SF + BLINDOS is available here (click).    

DEA GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA)

GEKO Articulated Arms (GEKO/BA, GEKO/BS, GEKO/BL, GEKO/BLA) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 629260 GEKO/BA Aluminium articulated arm for GEKO and Angolo operators 629261 GEKO/BS Rail sliding arm, painted galvanized steel, for GEKO and Angolo operators 629262 GEKO/BL Long arm for GEKO, painted galvanized steel 629263 GEKO/BLA Long arm for GEKO, aluminium  

DEA MLS/SFR Adjustable Fixing Plates to be Screwed

MLS/SFR Adjustable Fixing Plates to be Screwed This item is to be used with following DEA ranges: DEA STING DEA LOOK  

DEA COL 515 Anti-falling stainless steel cable with 2 holes for swing doors

COL 515 Anti-falling stainless steel cable with 2 holes for swing doors This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK DEA OLI/N DEA GEKO DEA ANGOLO DEA LIVI 502

DEA BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators

BAT/LIVI 3-6-9/24 Rechargeable batteries kit for LIVI/N 24V operators Rechargeable batteries kit for LIVI/N 24V operators, 12V - 1,2Ah, complete with wiring cables and fixing plate. More information in downloads.    

DEA 450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS

450N Unlocking device by cable for LIVI/N (4,5m) - use with BLINDOS Unlocking device by cable for LIVI/N (4,5m). To be used with BLINDOS. More information in downloads.  

DEA Racks for sliding gates - 1m length (111, 112, 113, 116)

DEA Racks for sliding gates - 1m length (111, 112, 113, 116) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 619000 111* Nylon rack, with fixing screws (1m) 126001 112** Galvanized steel rack 22x22mm (1m) 126000 113** Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) 126008 116 Galvanized steel rack M6 (1m)   NOTE:  * Order in multiples of 10 ** Order in multiples of 4  

CDVI Universal Radio Transmitter OPR-KIT and NANO Receiver

Product Overview The Universal Radio Transmitter OPR-KIT and NANO Receiver is designed to convert any device operating a switch into a wireless control system. This kit is particularly useful in situations where it is difficult to install cables, such as remotely sited disabled buttons or other remote switches. The receiver can memorize up to 85 CDVI radio transmitters, offering enhanced flexibility and control for a wide range of applications. Key Features Creates wireless devices from any switch-operated device Ideal for difficult cable installations Receiver can memorize up to 85 CDVI radio transmitters Rolling Code Keeloq® technology 433.92MHz frequency ASK modulation Compact and easy to install Product Description The OPR-KIT allows you to create your own wireless device, making it an ideal solution for converting any switch-operated device into a radio control system. This kit is particularly useful in areas where installing cables is challenging, such as for remotely sited disabled buttons. The NANO receiver enhances the flexibility of the kit, capable of memorizing up to 85 CDVI radio transmitters. Using Rolling Code Keeloq® technology, the OPR-KIT ensures secure and reliable communication between the transmitter and receiver. Operating at a frequency of 433.92MHz with ASK modulation, the kit provides a robust and efficient wireless control solution. Technical Specifications SpecificationDetails Frequency 433.92MHz Modulation ASK Coding Rolling Code Keeloq® Receiver Memory 85 transmitters Transmitter Voltage 9Vdc battery Receiver Voltage 12V to 24Vac/dc Transmitter Dimensions 54 x 29 x 6mm Receiver Dimensions 50 x 32 x 20mm Additional Information The Universal Radio Transmitter OPR-KIT and NANO Receiver provide a flexible and efficient solution for wireless control applications. Whether you need to convert a switch-operated device into a wireless system or require a solution for difficult cable installations, this kit offers the reliability and functionality you need. Included in the Box 1 x Universal Radio Transmitter OPR-KIT 1 x NANO Receiver 9Vdc battery for transmitter Installation manual

CDVI Door Safety Sensor DWSSS-5M1 | Monitored

Product Overview The Door Safety Sensor DWSSS-5M1 is a robust and reliable sensor designed to ensure the safety of users during the operation of automatic doors. Part of CDVI's range of sturdy sensors, the DWSSS-5M1 provides effective monitoring and protection, activating Digiway door automation systems in full compliance with the EN16005 standard. This infrared door sensor is essential for maintaining safety and compliance in environments where automatic doors are used. Key Features Monitored door safety sensor Infrared detection Ensures user safety during door operation Activates Digiway door automation systems Full compliance with EN16005 standard Product Description The DWSSS-5M1 Door Safety Sensor is an infrared sensor designed to ensure the safety of users when automatic doors are in operation. This monitored sensor is part of CDVI's range of high-quality safety devices that provide automatic door opening and user protection. It activates Digiway door automation systems, ensuring smooth and safe door operation in compliance with the EN16005 standard. Designed for use in various environments, the DWSSS-5M1 is ideal for public buildings, hospitals, and other locations where user safety is paramount. Its robust construction and reliable performance make it an essential component for any automatic door system. Technical Specifications SpecificationDetails Type Infrared door safety sensor Monitoring Yes Compliance EN16005 Additional Information The DWSSS-5M1 Door Safety Sensor ensures user protection by activating Digiway door automation systems. Its infrared technology provides reliable detection, ensuring that automatic doors operate safely and in compliance with the EN16005 standard. This sensor is a crucial addition to any facility where automatic doors are used, enhancing safety and operational efficiency. Included in the Box 1 x Door Safety Sensor DWSSS-5M1 Installation manual

NICE Kit CMBK6 for Installing a Low Mecha - 6mnical Edge

Kit for installing a low mechanical edge, with aluminum profiles measuring 6m (to use together with CB).    

NICE Kit CMBK4 for Installing a Low Mechanical Edge - 4m

Kit for installing a low mechanical edge, with aluminium profiles measuring 4m (to use together with CB).

NICE High Mechanical Sensitive Edge with Aluminium Profile CMA2 5MT - Length 2.5m

High mechanical edge with aluminium profile - length 2.5m.

NICE High Mechanical Edge CMA 2MT with Aluminium Profile - 2m

High mechanical edge with aluminium profile - length 2m.

NICE High Mechanical Edge with Aluminium Profile CMA 1.7MT

High mechanical edge with aluminium profile, measuring 1.7m.  

NICE High Mechanical Edge with Aluminium Profile CMA1 5MT - 1.5m

High mechanical edge with aluminium profile measuring 1.5m.

NICE OX2TFM Receiver | 2 Channels with Built-In Transmitter, 868.46 MHz

Product Overview The OX2TFM is a pre-wired 2 channel receiver with a built-in transmitter, operating on the 868.46 MHz frequency. This universal receiver is designed for use with all types of control units, making it ideal for controlling automation systems, lighting, irrigation, and other electric circuits. Its convenient and practical design ensures quick and user-friendly programming. Key Features 2 channel receiver with built-in transmitter Operates on 868.46 MHz frequency Pre-wired for universal use Compatible with all types of control units Suitable for automation, lighting, irrigation, and other electric circuits Convenient and practical design Quick and user-friendly programming Product Description OX2TFM Receiver - 2 Channels with Built-In Transmitter The OX2TFM is a versatile and reliable receiver designed to control a wide range of systems, including automation, lighting, and irrigation. With its built-in transmitter and 2 channels, this receiver operates on the 868.46 MHz frequency, providing robust performance and flexibility. The pre-wired design ensures easy installation and compatibility with various control units. Universal Compatibility This receiver is universally compatible with all types of control units, making it an ideal solution for various applications. Whether you need to control an automation system, lighting setup, irrigation system, or other electric circuits, the OX2TFM provides reliable and efficient performance. Easy Programming and Installation The OX2TFM receiver is designed for convenience and practicality, featuring quick and user-friendly programming. The pre-wired design simplifies the installation process, allowing you to easily integrate the receiver into your existing control systems.

NICE Solemyo SYKCE | Solar Power Kit with SYP Photovoltaic Panel and PSY24 Battery

Product Overview The Solemyo SYKCE Solar Power Kit is a comprehensive solution designed to automate gates, garage doors, and road barriers using solar power. This kit includes the SYP photovoltaic panel and the PSY24 battery box with a charging control circuit, providing a reliable and eco-friendly power source for your automation systems. Key Features Complete solar power kit for automation systems Includes SYP photovoltaic panel for 24V supply PSY24 battery box with control circuit and carry handles Contains all necessary cables and connectors Ideal for gates, garage doors, and road barriers Eco-friendly and sustainable power solution Product Description Solemyo SYKCE Solar Power Kit - SYP Photovoltaic Panel and PSY24 Battery The Solemyo SYKCE Solar Power Kit offers a sustainable and efficient way to automate gates, garage doors, and road barriers. This kit includes the SYP photovoltaic panel, which provides a 24V power supply, and the PSY24 battery box equipped with a charging control circuit. Together, they create a reliable solar power system for your automation needs. Components Included SYP Photovoltaic Panel: A high-efficiency panel that generates a 24V power supply, harnessing solar energy to power your automation systems. PSY24 Battery Box: A 24V battery box with an integrated control circuit and convenient carry handles, ensuring easy transport and installation. The control circuit manages the charging process, optimizing the battery life and performance. Cables and Connectors: The kit includes all necessary cables and connectors to ensure a seamless connection between the photovoltaic panel and the battery box, as well as to the automation systems. Eco-Friendly Automation The Solemyo SYKCE Solar Power Kit provides an eco-friendly alternative to traditional power sources. By utilizing solar energy, this kit helps reduce carbon emissions and energy costs, promoting a sustainable approach to automation. Applications Ideal for a variety of applications, the SYKCE kit is perfect for automating gates, garage doors, and road barriers. It ensures that your automation systems operate smoothly and efficiently, even in locations without access to conventional power sources.

NICE Tag System TTX4 Recessed Transmitter with Mains Power

Recessed transmitter, 4 channels, with mains power. Ideal for the control of automations not directly accessible from cable controls.

Niceway OX4T | Pre-Wired 4 Channel Receiver with Built-In Transmitter

Product Overview The Niceway OX4T is a pre-wired universal 4 channel receiver with a built-in transmitter, operating on the 433.92 MHz frequency. This versatile receiver allows you to integrate Nice remote controls into automation systems from other brands or manufacturers. The OX4T features 4 voltage-free contact relays, making it compatible with any type of control unit. Key Features Universal receiver with built-in transmitter Operates on 433.92 MHz frequency 4 channels Part of the NiceOne series of radio receivers Compatible with Nice Opera system Supports various Nice radio encoding formats: O-Code, FloR, TTS, Smilo, Flo (rolling code) 4 voltage-free contact relays Product Description Niceway OX4T Pre-Wired 4 Channel Receiver with Built-In Transmitter The Niceway OX4T receiver is a universal solution for integrating Nice remote controls into diverse automation systems. With its built-in transmitter and 4 channels, the OX4T operates on the 433.92 MHz frequency, ensuring robust and reliable performance. As part of the NiceOne series and Nice Opera system, this receiver offers advanced functionality and compatibility. Universal Compatibility The OX4T receiver is designed to work with any type of control unit, thanks to its 4 voltage-free contact relays. This universal compatibility makes it an ideal choice for integrating Nice remote controls into automation systems from various brands or manufacturers. Advanced Radio Encoding The OX4T supports multiple Nice radio encoding formats, including O-Code, FloR, TTS, Smilo, and Flo (rolling code). This ensures seamless communication and integration with Nice remote controls, providing flexible and reliable control options. Easy Installation and Integration The pre-wired design of the OX4T receiver simplifies installation, allowing for quick and easy integration into your existing control systems. Whether you need to enhance an existing setup or create a new one, the OX4T offers a user-friendly and efficient solution.

Niceway OX2 | Pre-Wired Universal Receiver, 2 Channels, 433.92 MHz

Product Overview The Niceway OX2 is a pre-wired, universal 2 channel receiver operating on the 433.92 MHz frequency. Designed without a built-in transmitter, this receiver is part of the NiceOne series and can be used with any type of control unit. It operates using 2 voltage-free contact relays, making it suitable for automation systems such as gates, garage doors, and road barriers. Key Features Universal, pre-wired receiver with 6-core cable 2 channel receiver without built-in transmitter Works on 433.92 MHz frequency Can memorize up to 1024 remote controls Part of the Nice Opera system Communicates using Nice O-Code radio encoding system Compatible with FloR, TTS, Smilo, and Flo encoding systems* *Some exclusive NiceOpera system functions cannot be used with these encoding systems. Product Description Niceway OX2 Pre-Wired Universal 2 Channel Receiver The Niceway OX2 is a versatile and reliable receiver designed to integrate seamlessly with various control units. It features a pre-wired 6-core cable for easy connection and operates on a 433.92 MHz frequency. As part of the NiceOne series, the OX2 receiver is ideal for use in automation systems including gates, garage doors, and road barriers. Compatibility and Encoding This receiver is compatible with the Nice Opera system and communicates using the Nice O-Code radio encoding system. It also supports FloR, TTS, Smilo, and Flo encoding systems, although some exclusive NiceOpera system functions may not be available with these encoding systems. High Capacity and Easy Programming The OX2 receiver can memorize up to 1024 remote controls, making it suitable for large installations. Programming your remote controls is straightforward, ensuring quick and efficient setup. How Does It Work? The Niceway OX2 receiver operates using 2 voltage-free contact relays, allowing it to be used with any type of control unit. To install, simply connect the 6-core cable to your control unit as per the product manual and program your remote controls.

ROGER TECHNOLOGY E80/TX52R/2 - Transmitter 2 Channel 433.92 MHz

Product Overview The E80/TX52R/2 is a 2-channel fixed code transmitter operating at 433.92 MHz. Designed for reliable gate automation, this transmitter provides up to 65536 combinations and a maximum range of 150m in open field conditions. Key Features 2-channel transmitter Operates at 433.92 MHz Fixed code modulation Radio for copy function Maximum range of 150m in open field Compact and lightweight design Product Description The E80/TX52R/2 transmitter is engineered to provide robust and secure gate automation control. Operating on a 433.92 MHz frequency with AM/ASK modulation, this transmitter supports up to 65536 fixed code combinations, ensuring secure and reliable access control. Its compact design and radio for copy function make it an ideal choice for residential and commercial applications. Specifications SpecificationDetails Standard power 3V DC Absorption 12mA Operating temperature -10 to +55°C Number of channels 2 Codification Fixed code Modulation AM/ASK Carried frequency 433.92 MHz Number of combinations 65536 Radio for copy Yes Maximum distance in open field 150m Battery Mod "CR2032" 3V Maximum dimension product (L x W x H) 38 x 68 x 11 mm Product weight packed 0.03 kg Applications The E80/TX52R/2 is ideal for controlling gate automation systems in both residential and commercial environments. Its fixed code modulation and multiple channels ensure secure and versatile access management.

ROGER TECHNOLOGY E80/TX54R/2 - Transmitter 4 Channel 433.92 MHz

Product Overview The E80/TX54R/2 is a 4-channel fixed code transmitter operating at 433.92 MHz. Designed for seamless gate automation, this transmitter provides reliable performance with up to 65536 combinations and a maximum range of 150m in open field conditions. Key Features 4-channel transmitter Operates at 433.92 MHz Fixed code modulation Radio for copy function Maximum range of 150m in open field Compact and lightweight design Product Description The E80/TX54R/2 transmitter is engineered to provide robust and secure gate automation control. Operating on a 433.92 MHz frequency with AM/ASK modulation, this transmitter supports up to 65536 fixed code combinations, ensuring secure and reliable access control. Its compact design and radio for copy function make it an ideal choice for residential and commercial applications. Specifications SpecificationDetails Standard power 3V DC Absorption 12mA Operating temperature -10 to +55°C Number of channels 4 Codification Fixed code Modulation AM/ASK Carried frequency 433.92 MHz Number of combinations 65536 Radio for copy Yes Maximum distance in open field 150m Battery Mod "CR2032" 3V Maximum dimension product (L x W x H) 38 x 68 x 11 mm Product weight packed 0.03 kg Applications The E80/TX54R/2 is ideal for controlling gate automation systems in both residential and commercial environments. Its fixed code modulation and multiple channels ensure secure and versatile access management.

ROGER TECHNOLOGY H93/RX22A/I - Plug-in Receiver 2 Channels 433.92 MHz

Product Overview The H93/RX22A/I is a versatile plug-in receiver featuring 2 channels and operating at 433.92 MHz. It is designed for seamless integration with control unit series H70, B70, EDGE, and CTRL. With the ability to store up to 500 codes, this receiver is ideal for various gate automation applications. Key Features 2-channel plug-in receiver Operates at 433.92 MHz Compatible with H70, B70, EDGE, and CTRL control units Stores up to 500 codes Standard power supply of 5V DC Product Description The H93/RX22A/I plug-in receiver is engineered to provide reliable performance in gate automation systems. Operating on a 433.92 MHz frequency with AM/ASK modulation, this receiver offers secure and stable communication with compatible control units. Its compact design ensures easy installation and integration into your existing setup. Specifications SpecificationDetails Standard power 5V DC Absorption 15mA Operating temperature -10 to +55°C Number of channels 2 Codification Fix code Modulation AM/ASK Carried frequency 433.92 MHz Exit Open collector Storable codes 500 Sensibility -107 dBm Input impedance 50 Ω Maximum dimension product (L x W x H) 60 x 32 x 12 mm Product weight packed 0.03 kg Applications The H93/RX22A/I is ideal for controlling gate automation systems in both residential and commercial environments. Its compatibility with a range of control units and ability to store multiple codes make it a reliable choice for managing access control efficiently.

ROGER TECHNOLOGY EDGE1/Box - 36V Control Unit for 2 Brushless Motors

Product Overview The EDGE1/Box is a sophisticated 36V digital control unit specifically designed for managing two brushless motors. Encased in a durable plastic box, this unit provides robust control and power management for automated gate systems, ensuring reliability and efficiency in both residential and commercial settings. Key Features Digital control for two brushless motors Operates at 36V with a 230V AC power supply Comes in a protective plastic box Supports a wide operating temperature range Multiple accessory outputs and support for an optional battery Product Description The EDGE1/Box control unit is engineered to handle the complexities of modern gate automation systems. With the ability to manage two brushless motors, this unit provides precise control and power distribution, making it an essential component for swing and sliding gate operations. The robust plastic enclosure ensures durability and protection against environmental factors. Specifications SpecificationDetails Power line supply 230V AC - 50 Hz Operating temperature -10 to +55°C Protection level IP54 Number of motors activated 2 Brushless Motors Max power per motor 250W Max courtesy light charge 100W (230V AC) / 40W (24V AC/DC) Max power gate open light 3W (24V DC) Max voltage accessories output 20W (24V DC) Electrical-lock max power 15W (12V DC) Flashlight voltage 24V DC Max flashing light charge 25W Battery Optional Dimensions (L x W x H) 330 x 230 x 115 mm Product weight packed 5.7 kg Number of items per pallet 50 Applications The EDGE1/Box is ideal for controlling swing and sliding gate systems in both residential and commercial environments. Its advanced features and durable design make it a reliable choice for ensuring the smooth operation of automated gates.

ROGER TECHNOLOGY KIT EDGE1/22/UK - 36V Control Kit for 2 Brushless Motors

Product Overview The KIT EDGE1/22/UK is an advanced electronic control kit designed for managing two 36V brushless motors. It comes complete with a digital controller, plug-in radio receiver, transmitters, photocells, a flashing light, and an antenna, ensuring seamless operation and enhanced security for your automated gate systems. Key Features 36V digital controller for two brushless motors Includes plug-in radio receiver with 2 channels Comes with two 2-channel transmitters Synchronized external photocells (up to 4 pairs) LED flashing light for visual alerts High-performance antenna for reliable signal reception Product Description The KIT EDGE1/22/UK is specifically designed to provide robust control for two brushless motors operating at 36V. This kit is perfect for various applications, including swing and sliding gate systems, ensuring reliable and efficient performance. The inclusion of a digital controller and various accessories enhances the functionality and safety of your automated gate setup. What's in the Box 1 x EDGE1/Box Control Unit: Digital controller for managing two brushless motors. 1 x H93/RX22A/1 Plug-in Radio Receiver: Operates at 433.92 MHz with 2 channels for seamless operation. 2 x E80/TX52R/2 Transmitters: Dual-channel transmitters for remote control of your gate system. 1 x R90/F4ES Pair of External Photocells: Synchronized photocells for enhanced safety, supporting up to 4 pairs. 1 x R92/LED24 LED Flashing Light: Provides visual alerts during gate operation. 1 x R91/AN1/LR1 Antenna: Ensures reliable signal reception for optimal performance. Specifications ComponentDescription Control Unit EDGE1/Box for 2 Brushless Motors Radio Receiver H93/RX22A/1 Plug-in, 2 channels, 433.92 MHz Transmitters 2 x E80/TX52R/2, Dual-channel, 433.92 MHz Photocells R90/F4ES, Synchronized, Maximum 4 pairs Flashing Light R92/LED24 Antenna R91/AN1/LR1 Applications The KIT EDGE1/20 is ideal for controlling swing and sliding gate systems in both residential and commercial settings. Its advanced digital controller and comprehensive accessory package ensure efficient and secure operation.  

Dictator DIREKT 200 | Advanced Gate/Door Closer for Outdoor Safety

Product Overview The DICTATOR DIREKT 200 gate closer provides a secure and reliable solution for the automated closing of gates in outdoor settings, offering enhanced safety features compared to traditional models. Product Description The DIREKT 200 is specifically engineered for environments where safety and reliability are critical. It gently closes gates, making it ideal for locations such as kindergartens, schools, and industrial facilities. This model prevents gates from slamming and reduces the risk of injuries, such as pinched fingers or collisions with individuals passing through. Key Features Adjustable closing speed to match safety needs. Ability to lock in the open position temporarily, eliminating the need for additional devices. Installation simplicity akin to standard closing springs but with advanced control features. Reduces the risk of accidents associated with gate closures. What's in the Box Includes the Dictator DIREKT 200 gate closer unit, complete installation kit, and a detailed instruction manual for easy setup. Specifications Type Gate/Door closer Application Outdoor, particularly in educational and industrial environments Features Adjustable speed, hold open capability Installation Easy, with no additional tools required for hold open feature

Dictator RTS Hydraulic Hinge Closer | Concealed Door Closer for Gates

Product Overview The DICTATOR RTS Hydraulic Hinge Closer is expertly designed for seamless integration into doors, making it virtually invisible when the door is closed. Ideal for external gates without upper door frames. Product Description The RTS tube door closer is integrated directly into the door, only visible when the door is open. This design is particularly suited for external gates that face exposure to the elements and potential vandalism, providing a reliable and discreet closing mechanism. Key Features Integrated design, concealed within the door for a clean look. Suitable for outdoor gates in gardens, industrial plants, and more. Protection against weather conditions and vandalism due to concealed fitting. What's in the Box The package includes one DICTATOR RTS Hydraulic Hinge Closer, installation accessories, and an installation guide. Specifications Type Hydraulic hinge closer Application Exterior gates without upper frames Visibility Only visible when door is open

BAT (629290) Battery Back up for 24v DEA kits

Art. BAT Item BATCod. 629290 Rechargeable batteries kit for 24V operators, 12V - 1,3Ah, complete with wiring cables.

MEAN WELL HDR-15-12 DIN Rail Power Supply | 12V, 1.25A, 15W | Ultra-Slim Design

Product Overview The HDR-15-12 is an economical ultra-slim 12-15.4W DIN rail power supply, designed to be installed on TS-35/7.5 or TS-35/15 mounting rails. With a compact 17.5mm width, it allows for space-saving installation inside cabinets. Product Description Designed for efficiency and reliability, the HDR-15-12 DIN Rail Power Supply features short circuit, overload, and over voltage protection to ensure safe operation. Its ultra-slim 17.5mm design makes it ideal for applications where space is limited. The power supply is cooled by free air convection and includes an LED indicator for power status. The adjustable DC voltage output provides flexibility for various applications. Key Features Short circuit, overload, and over voltage protection Ultra-slim 17.5mm design LED indicator for power on Adjustable DC Voltage output TS-35/7.5 or TS-35/15 Mountable Cooled by free air convection No load power consumption <0.3W What's in the Box 1 x HDR-15-12 DIN Rail Power Supply Installation instructions Warranty card Specifications Model: HDR-15-12 Output Voltage: 12V Output Current: 1.25A Power Output: 15W Mounting: TS-35/7.5 or TS-35/15 Dimensions (HxWxD): 90 x 58.4 x 17.5mm Power Consumption: <0.3W (no load)

DEA MAC/FM Mechanical stops for MAC / STING (2 pcs) - for 1 operator

MAC/FM Mechanical stops for MAC / STING (2 pcs) - for 1 operator MAC/FM Mechanical Limit Stops For 1 x Mac or Sting Ram.  

BPT CAME-TAG-100 | Pack of 100 Transponder Bulbs

Product Overview The BPT CAME-TAG-100 transponder bulbs are high-quality components designed for use in gate automation systems. Available in a convenient pack of 100, these transponder bulbs ensure reliable performance and are ideal for maintaining and enhancing your access control systems. These bulbs are essential for the proper functioning of your gate automation, providing accurate and secure transponder signals. Key Features High-quality transponder bulbs for gate automation systems Available in a pack of 100 for convenience Ensures reliable and accurate performance Essential for maintaining access control systems Product Description The BPT CAME-TAG-100 transponder bulbs are crucial for ensuring the efficient operation of your gate automation systems. Each bulb is designed to provide precise and secure transponder signals, making them an indispensable component for access control. Whether you are upgrading your existing system or performing maintenance, these transponder bulbs are a reliable choice. Available in a pack of 100, the TAG-100 transponder bulbs offer ample supply for extensive use or for stocking up to ensure you have replacements readily available when needed. These bulbs are compatible with a range of gate automation systems, providing flexibility and ease of use. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-TAG-100 Type: Transponder Bulbs Quantity: Pack of 100 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

CAME 806SL-0300 | Stand-Alone Proximity Reader for Up to 250 Users

Product Overview The CAME 806SL-0300 is a stand-alone proximity reader designed to manage access for up to 250 users. This versatile device supports proximity cards, key fobs, and tags, making it an ideal solution for secure access control. The TSP01 reader can operate independently without connection to a PC and offers both monostable and bistable relay output options, ensuring flexible control of access points. Key Features Stand-alone proximity reader for up to 250 users Supports proximity cards, key fobs, and tags Monostable and bistable relay output options Card programming with dip switch configuration LED status indicator for easy operation IP54 rated for protection against dust and water Product Description The CAME 806SL-0300 proximity reader (TSP01) is a robust and reliable access control solution, capable of handling up to 250 users. Designed for stand-alone operation, this reader does not require a connection to a PC, offering ease of installation and use. It is compatible with proximity cards (TST01), key fobs, and tags (432SA), providing versatile options for user access. With the ability to operate on 12/24V AC/DC power, the TSP01 is suitable for a wide range of applications. The reader features an LED status indicator to provide clear feedback during operation and card programming. Users can configure the relay output to be either monostable or bistable, depending on their specific access control needs. For added security and durability, the CAME 806SL-0300 is IP54 rated, ensuring protection against dust and water. Its compact dimensions (70x70x70mm) make it easy to install in various environments. Note that while the reader supports relay outputs, it cannot control 230V AC devices directly through the relay contacts. The proximity reader can also be connected to CAME's RMB84 Controller for enhanced functionality and integration within a broader access control system. Technical Specifications Product Code: CAME-806SL-0300 Power Supply: 12/24V AC/DC Maximum Users: 250 Relay Output: Maximum 5A Operating Temperature: -20°C to 70°C Max. Reading Distance: 5 cm IP Rating: IP54 Dimensions: 70x70x70mm Installation and Safety Please ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.