NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

NICE FloR System Receiver SMXI with SM Plug - In 433.92MHz

Universal pre-wired receiver, 2 channels with memory containing 256 codes - FLO coding.

NICE OX2TFM Receiver | 2 Channels with Built-In Transmitter, 868.46 MHz

Product Overview The OX2TFM is a pre-wired 2 channel receiver with a built-in transmitter, operating on the 868.46 MHz frequency. This universal receiver is designed for use with all types of control units, making it ideal for controlling automation systems, lighting, irrigation, and other electric circuits. Its convenient and practical design ensures quick and user-friendly programming. Key Features 2 channel receiver with built-in transmitter Operates on 868.46 MHz frequency Pre-wired for universal use Compatible with all types of control units Suitable for automation, lighting, irrigation, and other electric circuits Convenient and practical design Quick and user-friendly programming Product Description OX2TFM Receiver - 2 Channels with Built-In Transmitter The OX2TFM is a versatile and reliable receiver designed to control a wide range of systems, including automation, lighting, and irrigation. With its built-in transmitter and 2 channels, this receiver operates on the 868.46 MHz frequency, providing robust performance and flexibility. The pre-wired design ensures easy installation and compatibility with various control units. Universal Compatibility This receiver is universally compatible with all types of control units, making it an ideal solution for various applications. Whether you need to control an automation system, lighting setup, irrigation system, or other electric circuits, the OX2TFM provides reliable and efficient performance. Easy Programming and Installation The OX2TFM receiver is designed for convenience and practicality, featuring quick and user-friendly programming. The pre-wired design simplifies the installation process, allowing you to easily integrate the receiver into your existing control systems.

NICE Receiver OX2FM - 2 Channels Without Built-In Transmitter

Pre-wired Receiver with Opera System functions - 2 channels 868.46MHz without built-in transmitter.  

NICE ERA FLOR Transmitter FLO1RCE | 1 Channel with Sequential Code

Product Overview The Nice Era FLOR FLO1RCE is a 1 channel remote control transmitter designed for use with Nice automation systems. Operating at a frequency of 433.92 MHz with rolling code and sequential coding technology, this transmitter is ideal for controlling gates, garage doors, roller shutters, and more. Part of the Nice Era FLOR series, the FLO1RCE ensures secure and reliable operation. Key Features 1 channel transmitter operating on 433.92 MHz Rolling code technology with sequential coding for enhanced security Self-learning capabilities for easy setup Quick and user-friendly programming Easy duplication of new transmitter close to the system using an authorized transmitter or a key on the receiver Batteries and instructions included Product Description ERA FLOR Transmitter FLO1RCE - 1 Channel with Sequential Code The Nice Era FLOR FLO1RCE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with rolling code and sequential coding technology, this transmitter ensures reliable and secure operation. The self-learning capabilities make setup and integration straightforward, while the sequential coding allows for multiple input and efficient control. Advanced Features and Easy Setup The FLO1RCE transmitter is designed for easy duplication of new transmitters close to the system using an authorized transmitter or directly using a key on the receiver. The quick and user-friendly programming ensures that you can have your system up and running in no time. Compatibility Compatible with all receivers using the FLO-R coding system With its advanced features and user-friendly design, the Nice Era FLOR FLO1RCE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA FLOR Transmitter FLO4RE | 4 Channels 433.92 MHz

Product Overview The Nice Era FLOR FLO4RE is a 4 channel remote control transmitter designed for use with Nice automation systems. Operating at a frequency of 433.92 MHz with rolling code technology, this transmitter is ideal for controlling gates, garage doors, roller shutters, and more. Part of the Nice Era FLOR series, the FLO4RE ensures secure and reliable operation. Key Features 4 channel transmitter operating on 433.92 MHz Rolling code technology for enhanced security Self-learning capabilities for easy setup Multi-user management with unique personal code Compatible with all receivers using the FLO-R coding system Quick and user-friendly programming Easy duplication of new transmitter close to the system using an authorized transmitter or a key on the receiver Batteries and instructions included Product Description ERA FLOR Transmitter FLO4RE - 4 Channels 433.92 MHz The Nice Era FLOR FLO4RE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with rolling code technology, this transmitter ensures reliable and secure operation. The self-learning capabilities make setup and integration straightforward, while the multi-user management feature allows for efficient control with a unique personal code. Advanced Features and Easy Setup The FLO4RE transmitter is designed for easy duplication of new transmitters close to the system using an authorized transmitter or directly using a key on the receiver. The quick and user-friendly programming ensures that you can have your system up and running in no time. Compatibility Compatible with all receivers using the FLO-R coding system With its advanced features and user-friendly design, the Nice Era FLOR FLO4RE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA FLOR Transmitter FLO2RE | 2 Channels 433.92 MHz

Product Overview The Nice Era FLOR FLO2RE is a 2 channel remote control transmitter designed for use with Nice automation systems. Operating at a frequency of 433.92 MHz with rolling code technology, this transmitter is ideal for controlling gates, garage doors, roller shutters, and more. Part of the Nice Era FLOR series, the FLO2RE ensures secure and reliable operation. Key Features 2 channel transmitter operating on 433.92 MHz Rolling code technology for enhanced security Self-learning capabilities for easy setup Multi-user management with unique personal code Compatible with all receivers using the FLO-R coding system Range of 150ft in open field Quick and user-friendly programming Batteries and instructions included Protection Rating: IP40 Powered by 3V CR2032 Lithium Battery Product Description ERA FLOR Transmitter FLO2RE - 2 Channels 433.92 MHz The Nice Era FLOR FLO2RE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with rolling code technology, this transmitter ensures reliable and secure operation. The self-learning capabilities make setup and integration straightforward, while the multi-user management feature allows for efficient control with a unique personal code. Advanced Features and Easy Setup The FLO2RE transmitter offers a range of 150ft in open field, providing ample coverage for most applications. The IP40 protection rating ensures durability in various conditions. It is powered by a 3V CR2032 Lithium Battery, making it a long-lasting and dependable choice. The quick and user-friendly programming ensures that you can have your system up and running in no time. Compatibility Compatible with all receivers using the FLO-R coding system With its advanced features and user-friendly design, the Nice Era FLOR FLO2RE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA FLOR Transmitter FLO1RE | 1 Channel 433.92 MHz

Product Overview The Nice Era FLOR FLO1RE is a 1 channel remote control transmitter designed for use with Nice automation systems. Operating at a frequency of 433.92 MHz with rolling code technology, this transmitter is ideal for controlling gates, garage doors, roller shutters, and more. Part of the Nice Era FLOR series, the FLO1RE ensures secure and reliable operation. Key Features 1 channel transmitter operating on 433.92 MHz Rolling code technology for enhanced security Self-learning capabilities for easy setup Multi-user management with unique personal code Compatible with all receivers using the FLO-R coding system Easy duplication of new transmitter using an authorized transmitter or key on the receiver Quick and user-friendly programming Batteries and instructions included Product Description ERA FLOR Transmitter FLO1RE - 1 Channel 433.92 MHz The Nice Era FLOR FLO1RE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with rolling code technology, this transmitter ensures reliable and secure operation. The self-learning capabilities make setup and integration straightforward, while the multi-user management feature allows for efficient control with a unique personal code. Advanced Features and Easy Setup The FLO1RE transmitter is designed for easy duplication of new transmitters close to the system by using an authorized transmitter or directly using a key on the receiver. The quick and user-friendly programming ensures that you can have your system up and running in no time. Compatibility Compatible with all receivers using the FLO-R coding system With its advanced features and user-friendly design, the Nice Era FLOR FLO1RE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE Transmitter ON9EFM - 9 Channels 868.46MHz

Era transmitter - 9 channels 868.46MHz.

NICE ERA ONE Transmitter ON4EFM - 4 Channels 868.46MHz

Era transmitter - 4 channels 868.46MHz.

NICE ERA ONE Transmitter ON1EFM - 1 Channel 868.46MHz

Era transmitter - 1 channel 868.46MHz.

NICE ERA ONE Transmitter ON4CE | 4 Channels with Sequential Coding

Product Overview The Nice Era One ON4CE is a 4 channel remote control transmitter operating on a 433.92 MHz frequency. This transmitter features sequential coding for multiple insertions, making it an ideal choice for Nice automation systems. With easy memorisation capabilities and versatile mounting options, the ON4CE is a convenient and reliable solution for your automation needs. Key Features 4 channel transmitter operating on 433.92 MHz Sequential coding for multiple insertions Easy memorisation, even at a distance, thanks to the Opera receivers Can be used as a keyring or fixed to a wall or car dashboard with the included support pack Battery and instructions included Product Description ERA ONE Transmitter ON4CE - 4 Channels with Sequential Coding The Nice Era One ON4CE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with sequential coding, this transmitter ensures reliable and efficient control of your automated systems. The sequential coding allows for multiple insertions, making it a practical choice for various applications. Advanced Features and User-Friendly Design The ON4CE transmitter features easy memorisation capabilities, even at a distance, thanks to the Opera receivers. This makes setup and integration into your existing system straightforward and hassle-free. Additionally, the transmitter can be used as a keyring or fixed to a wall or car dashboard using the included support pack, providing flexible mounting options to suit your needs. Compatibility Nice Opera system With its advanced features and user-friendly design, the Nice Era One ON4CE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA ONE Transmitter ON2CE | 2 Channels with Sequential Coding

Product Overview The Nice Era One ON2CE is a 2 channel remote control transmitter operating on a 433.92 MHz frequency. This transmitter features sequential coding for multiple insertions, making it an ideal choice for Nice automation systems. With easy memorisation capabilities and versatile mounting options, the ON2CE is a convenient and reliable solution for your automation needs. Key Features 2 channel transmitter operating on 433.92 MHz Sequential coding for multiple insertions Easy memorisation, even at a distance, thanks to the Opera receivers Can be used as a keyring or fixed to a wall or car dashboard with the included support pack Battery and instructions included Product Description ERA ONE Transmitter ON2CE - 2 Channels with Sequential Coding The Nice Era One ON2CE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with sequential coding, this transmitter ensures reliable and efficient control of your automated systems. The sequential coding allows for multiple insertions, making it a practical choice for various applications. Advanced Features and User-Friendly Design The ON2CE transmitter features easy memorisation capabilities, even at a distance, thanks to the Opera receivers. This makes setup and integration into your existing system straightforward and hassle-free. Additionally, the transmitter can be used as a keyring or fixed to a wall or car dashboard using the included support pack, providing flexible mounting options to suit your needs. Compatibility Nice Opera system With its advanced features and user-friendly design, the Nice Era One ON2CE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA ONE Transmitter ON1CE | 1 Channel with Sequential Coding

Product Overview The Nice Era One ON1CE is a 1 channel remote control transmitter operating on a 433.92 MHz frequency. This transmitter features sequential coding for multiple insertions, making it an ideal choice for Nice automation systems. With easy memorisation capabilities and versatile mounting options, the ON1CE is a convenient and reliable solution for your automation needs. Key Features 1 channel transmitter operating on 433.92 MHz Sequential coding for multiple insertions Easy memorisation, even at a distance, thanks to the Opera receivers Can be used as a keyring or fixed to a wall or car dashboard with the included support pack Battery and instructions included Product Description ERA ONE Transmitter ON1CE - 1 Channel with Sequential Coding The Nice Era One ON1CE transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz frequency with sequential coding, this transmitter ensures reliable and efficient control of your automated systems. The sequential coding allows for multiple insertions, making it a practical choice for various applications. Advanced Features and User-Friendly Design The ON1CE transmitter features easy memorisation capabilities, even at a distance, thanks to the Opera receivers. This makes setup and integration into your existing system straightforward and hassle-free. Additionally, the transmitter can be used as a keyring or fixed to a wall or car dashboard using the included support pack, providing flexible mounting options to suit your needs. Compatibility Nice Opera system With its advanced features and user-friendly design, the Nice Era One ON1CE transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE Transmitter ERA ON9E - 9 Channels 433.92MHz

Era transmitter  - 9 channels 433.92MHz.

NICE ERA ONE Transmitter ON4E | 4 Channels 433.92 MHz

Product Overview The Nice Era One ON4E is a 4 channel remote control transmitter operating on a 433.92 MHz rolling code. Designed for use with Nice automation systems, it offers advanced recognition systems and high-security 72-bit O-Code encoding. As part of the Nice Era One range and the Nice Opera system, this transmitter ensures quick and secure automation response times. Key Features 4 channel transmitter operating on 433.92 MHz rolling code High-security 72-bit O-Code encoding Advanced recognition systems for approximately 3x faster automation response times Management of certificates and identity codes Two transmission methods Self-learning with built-in proximity receiver Safe and secure replacement or disabling of lost/stolen remote control using the optional O-Box connection interface Includes support pack for use as a keyring, wall mount, or car dashboard attachment Battery and instructions included Product Description ERA ONE Transmitter ON4E - 4 Channels 433.92 MHz The Nice Era One ON4E transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz rolling code with high-security 72-bit O-Code encoding, this transmitter ensures reliable and rapid response times for your automation needs. Advanced Security and Recognition The ON4E transmitter features advanced recognition systems that provide approximately three times faster automation response times. It also manages certificates and identity codes, enhancing the security of your automation systems. If the remote control is lost or stolen, it can be replaced or disabled remotely using the optional O-Box connection interface. Flexible and User-Friendly This transmitter offers two transmission methods and self-learning capabilities with a built-in proximity receiver, making it easy to integrate into your existing setup. The included support pack allows you to use the ON4E as a keyring, attach it to a wall, or fix it to a car dashboard. Battery and instructions are included for your convenience. Compatibility Nice Opera system Nice O-Box connection interface Receivers using Flo-R encoding With its advanced features and high-security encoding, the Nice Era One ON4E transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE ERA ONE Transmitter ON2E | 2 Channels 433.92 MHz

Product Overview The Nice Era One ON2E is a 2 channel remote control transmitter operating on a 433.92 MHz rolling code. Designed for use with Nice automation systems, it offers advanced recognition systems and high-security 72-bit O-Code encoding. As part of the Nice Era One range and the Nice Opera system, this transmitter ensures quick and secure automation response times. Key Features 2 channel transmitter operating on 433.92 MHz rolling code High-security 72-bit O-Code encoding Advanced recognition systems for approximately 3x faster automation response times Management of certificates and identity codes Two transmission methods Self-learning with built-in proximity receiver Safe and secure replacement or disabling of lost/stolen remote control using the optional O-Box connection interface Includes support pack for use as a keyring, wall mount, or car dashboard attachment Battery and instructions included Product Description ERA ONE Transmitter ON2E - 2 Channels 433.92 MHz The Nice Era One ON2E transmitter is a versatile and secure remote control solution for your Nice automation systems. Operating on a 433.92 MHz rolling code with high-security 72-bit O-Code encoding, this transmitter ensures reliable and rapid response times for your automation needs. Advanced Security and Recognition The ON2E transmitter features advanced recognition systems that provide approximately three times faster automation response times. It also manages certificates and identity codes, enhancing the security of your automation systems. If the remote control is lost or stolen, it can be replaced or disabled remotely using the optional O-Box connection interface. Flexible and User-Friendly This transmitter offers two transmission methods and self-learning capabilities with a built-in proximity receiver, making it easy to integrate into your existing setup. The included support pack allows you to use the ON2E as a keyring, attach it to a wall, or fix it to a car dashboard. Battery and instructions are included for your convenience. Compatibility Nice Opera system Nice O-Box connection interface Receivers using Flo-R encoding With its advanced features and high-security encoding, the Nice Era One ON2E transmitter is a reliable and efficient choice for controlling your Nice automation systems.

NICE Universal Receivers SMX2R with 256-Codes Memory

Universal receivers, 2 channels with 256-codes memory, pre-wired.

NICE Solemyo Pair of PHW Wireless Photocells with Built-In Photovoltaic Panel

Pair of two-way wireless photocells with photovoltaic power supply.

NICE TT2D Mindy Control Unit | Management of 230 Vac Lighting Systems

Product Overview The TT2D Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and switching module, making it a versatile solution for efficiently controlling your lighting systems. This unit is compatible with a wide range of Nice transmitters, ensuring seamless integration and reliable performance. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver and switching module Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2D Mindy Control Unit for 230 Vac Lighting Systems The TT2D Mindy Control Unit is an advanced solution for managing 230 Vac lighting systems. This miniaturised unit includes a built-in radio receiver and switching module, providing comprehensive control over your lighting setup. Its compatibility with various Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo, ensures that you can easily integrate it into your existing system. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, offering ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2D Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2D Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.

NICE TT2L Mindy Control Unit | Management of 230 Vac Lighting Systems

Product Overview The TT2L Mindy Control Unit is a miniaturised control unit designed for the management of 230 Vac lighting systems. It features a built-in radio receiver and is compatible with a variety of Nice transmitters, making it a versatile solution for controlling your lighting systems efficiently and reliably. Key Features Miniaturised control unit for 230 Vac lighting systems Built-in radio receiver Compatible with Nice transmitters: Era, Niceway, Flo, Very, Planotime, FloR, and Smilo Can memorise up to 30 transmitters in Mode I and Mode II IP20 protection level Product Description TT2L Mindy Control Unit for 230 Vac Lighting Systems The TT2L Mindy Control Unit is an advanced, miniaturised solution for managing 230 Vac lighting systems. It comes with a built-in radio receiver, allowing it to communicate seamlessly with a wide range of Nice transmitters, including Era, Niceway, Flo, Very, Planotime, FloR, and Smilo. This compatibility ensures that you can integrate the TT2L control unit into your existing system with ease. High Compatibility and Memory This control unit can memorise up to 30 transmitters in Mode I and Mode II, providing ample capacity for managing multiple control points within your lighting system. This feature ensures flexible and comprehensive control over your lighting environment. Durable and Reliable The TT2L Mindy Control Unit is designed with durability and reliability in mind. With an IP20 protection level, it offers adequate protection against dust and other small particles, making it suitable for various indoor applications. Versatile Applications Whether you're looking to manage lighting in a residential, commercial, or industrial setting, the TT2L Mindy Control Unit provides a robust and efficient solution. Its miniaturised design allows for easy installation and integration, ensuring that you can quickly set up and start controlling your lighting systems.

NICE Pre-Wired Receiver OXITFM - With Built-In Transmitter

868.46 MHz pre-wired receiver - 4 channels - with built-in transmitter.  

Niceway OXIFM Receiver - Without Built-In Transmitter

868.46 MHz receiver with connector - 4 channels - without built-in transmitter.

Niceway OX4T | Pre-Wired 4 Channel Receiver with Built-In Transmitter

Product Overview The Niceway OX4T is a pre-wired universal 4 channel receiver with a built-in transmitter, operating on the 433.92 MHz frequency. This versatile receiver allows you to integrate Nice remote controls into automation systems from other brands or manufacturers. The OX4T features 4 voltage-free contact relays, making it compatible with any type of control unit. Key Features Universal receiver with built-in transmitter Operates on 433.92 MHz frequency 4 channels Part of the NiceOne series of radio receivers Compatible with Nice Opera system Supports various Nice radio encoding formats: O-Code, FloR, TTS, Smilo, Flo (rolling code) 4 voltage-free contact relays Product Description Niceway OX4T Pre-Wired 4 Channel Receiver with Built-In Transmitter The Niceway OX4T receiver is a universal solution for integrating Nice remote controls into diverse automation systems. With its built-in transmitter and 4 channels, the OX4T operates on the 433.92 MHz frequency, ensuring robust and reliable performance. As part of the NiceOne series and Nice Opera system, this receiver offers advanced functionality and compatibility. Universal Compatibility The OX4T receiver is designed to work with any type of control unit, thanks to its 4 voltage-free contact relays. This universal compatibility makes it an ideal choice for integrating Nice remote controls into automation systems from various brands or manufacturers. Advanced Radio Encoding The OX4T supports multiple Nice radio encoding formats, including O-Code, FloR, TTS, Smilo, and Flo (rolling code). This ensures seamless communication and integration with Nice remote controls, providing flexible and reliable control options. Easy Installation and Integration The pre-wired design of the OX4T receiver simplifies installation, allowing for quick and easy integration into your existing control systems. Whether you need to enhance an existing setup or create a new one, the OX4T offers a user-friendly and efficient solution.

Niceway OX2T Pre-Wired Receiver - 2 Channels / With Built-In Transmitter

Pre-wired universal 2 channel receiver 433.92 MHz - with built in transmitter.

Niceway OX2 | Pre-Wired Universal Receiver, 2 Channels, 433.92 MHz

Product Overview The Niceway OX2 is a pre-wired, universal 2 channel receiver operating on the 433.92 MHz frequency. Designed without a built-in transmitter, this receiver is part of the NiceOne series and can be used with any type of control unit. It operates using 2 voltage-free contact relays, making it suitable for automation systems such as gates, garage doors, and road barriers. Key Features Universal, pre-wired receiver with 6-core cable 2 channel receiver without built-in transmitter Works on 433.92 MHz frequency Can memorize up to 1024 remote controls Part of the Nice Opera system Communicates using Nice O-Code radio encoding system Compatible with FloR, TTS, Smilo, and Flo encoding systems* *Some exclusive NiceOpera system functions cannot be used with these encoding systems. Product Description Niceway OX2 Pre-Wired Universal 2 Channel Receiver The Niceway OX2 is a versatile and reliable receiver designed to integrate seamlessly with various control units. It features a pre-wired 6-core cable for easy connection and operates on a 433.92 MHz frequency. As part of the NiceOne series, the OX2 receiver is ideal for use in automation systems including gates, garage doors, and road barriers. Compatibility and Encoding This receiver is compatible with the Nice Opera system and communicates using the Nice O-Code radio encoding system. It also supports FloR, TTS, Smilo, and Flo encoding systems, although some exclusive NiceOpera system functions may not be available with these encoding systems. High Capacity and Easy Programming The OX2 receiver can memorize up to 1024 remote controls, making it suitable for large installations. Programming your remote controls is straightforward, ensuring quick and efficient setup. How Does It Work? The Niceway OX2 receiver operates using 2 voltage-free contact relays, allowing it to be used with any type of control unit. To install, simply connect the 6-core cable to your control unit as per the product manual and program your remote controls.

Niceway OXI Receiver | 4 Channels, 433.92 MHz, Without Built-In Transmitter

Product Overview The Niceway OXI Receiver is a 4-channel, 433.92 MHz receiver designed for use with Nice control boards that have SM ports. This receiver does not include a built-in transmitter but comes with advanced opera system functions, providing user-friendly programming and management tools for efficient control and operation. Key Features 4-channel receiver Operates on 433.92 MHz frequency Compatible with Nice control units with SM ports Handles up to 1024 transmitters/users User-friendly programming and management tools Printable log of codes Three levels of password protection Plug-in type with connector Product Description Niceway OXI Receiver - 4 Channels, 433.92 MHz The Niceway OXI Receiver is an advanced 4-channel receiver operating on the 433.92 MHz frequency, designed without a built-in transmitter. It is compatible with Nice control boards equipped with SM ports, making it a versatile addition to your control system. The receiver features opera system functions that enhance user experience with easy programming and management tools. Advanced Functionality and Security This receiver can handle up to 1024 transmitters/users, making it suitable for large installations. It offers user-friendly programming and management tools, along with a printable log of codes for easy record-keeping. The receiver also features three levels of password protection, ensuring secure access and operation. Easy Installation and Compatibility The Niceway OXI Receiver is a plug-in type radio receiver with a connector, ensuring easy installation. It is compatible with Nice control units with SM ports, providing a seamless integration into your existing control system.

NICE ERA INTIKIT | Transmitter and Receiver Kit

Product Overview The ERA INTIKIT is a comprehensive kit containing three two-channel INTI transmitters and one OX2 receiver. This kit is designed for efficient and reliable control applications, with a carrier frequency of 433.9 MHz. The transmitters are available in three colors: red, green, and blue, providing versatility and easy identification. Key Features Kit includes 3 two-channel INTI transmitters and 1 OX2 receiver Transmitter colors: red, green, and blue Carrier frequency: 433.9 MHz Estimated range: 150m outdoors / 30m indoors Power supply: 3 Vdc Product Description ERA INTIKIT Transmitter and Receiver Kit The ERA INTIKIT is a versatile and reliable transmitter and receiver kit, ideal for various control applications. The kit includes three two-channel INTI transmitters in red, green, and blue, and one OX2 receiver. The carrier frequency is 433.9 MHz, ensuring effective communication between the transmitters and receiver. Transmitters Each transmitter in the INTIKIT is designed for ease of use and reliable performance. The two-channel transmitters allow for flexible control options, and the different colors (red, green, and blue) make it easy to identify and manage multiple transmitters. The transmitters operate on a 3 Vdc power supply, providing consistent and long-lasting performance. Receiver The OX2 receiver included in the kit ensures efficient reception of signals from the INTI transmitters. The estimated range is 150m outdoors and 30m indoors, making it suitable for a variety of environments and applications. Whether for residential, commercial, or industrial use, the ERA INTIKIT provides a reliable and comprehensive solution for your control needs.

NICE Radio Digital Selector EDSWG | Wireless | Compatible with FLOR Series Receivers

Product Overview The Nice EDSWG radio digital selector is a compact and convenient access control device designed for compatibility with the receivers of the FLOR series. Featuring 13 keys and a backlit keypad, this wireless selector operates on a secure 433.92 MHz frequency with FLOR 52 bit self-learning rolling code for enhanced security. The EDSWG is surface-mounted with a depth of 27mm and is housed in a vandal-proof and weather-proof IP54 metal casing, ensuring durability and reliability in various conditions. Key Features 13-key surface-mounted backlit keypad Compact design with 27mm depth and 70mm length/width Acoustic feedback when buttons are pressed 100% wireless, no cables or wiring required Vandal-proof and weather-proof IP54 metal casing Operates in temperatures from -10°C to +55°C Three transmission channels for controlling separate systems or commands 433.92 MHz frequency FLOR 52 bit self-learning rolling code with up to 4.5 trillion combinations Opera radio coding Range of 25 meters in open space and 15 meters inside a building Energy-efficient design with ambient light sensor Automated turn-off when not in use, reactivates when a button is pressed Approximately 2 years of battery life (based on 10 transmissions a day) Operates using 2 x 3v CR2430 “coin style” batteries Product Description The Nice EDSWG radio digital selector is an essential component for secure and convenient access control. Designed for compatibility with FLOR series receivers, this 13-key selector offers wireless operation with no cables or wiring required. The backlit keypad and compact design (27mm depth and 70mm length/width) ensure ease of use and installation. The EDSWG provides acoustic feedback when buttons are pressed, enhancing user experience. Secure and Reliable The EDSWG operates on a 433.92 MHz frequency using FLOR 52 bit self-learning rolling code, offering up to 4.5 trillion combinations for enhanced security. The device supports three transmission channels, allowing for control of separate systems or different commands within a single automated system. The Opera radio coding ensures secure and reliable communication. Durable and Weather-Proof Encased in a vandal-proof and weather-proof IP54 metal casing, the EDSWG is designed to withstand harsh environmental conditions, ensuring long-lasting durability. The selector operates effectively in temperatures ranging from -10°C to +55°C, making it suitable for various installation environments. Energy Efficient The EDSWG features an ambient light sensor that activates keypad lighting only when necessary, significantly reducing energy consumption. The device also includes an automated turn-off function when not in use, reactivating whenever a button is pressed. With an estimated battery life of approximately 2 years (based on 10 transmissions per day), the EDSWG is highly energy-efficient. Specifications Keys: 13 Connection: Wireless to FLOR series receivers Mounting: Surface-mounted, 27mm depth Frequency: 433.92 MHz Coding: FLOR 52 bit self-learning rolling code Range: 25 meters in open space, 15 meters inside a building Protection Rating: IP54 Operating Temperature: -10°C to +55°C Battery Life: Approximately 2 years Power Supply: 2 x 3v CR2430 “coin style” batteries Package Contents Radio Digital Selector EDSWG Mounting hardware Instructions Applications The Nice EDSWG radio digital selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, secure operation, and ease of use make it a valuable addition to any automated setup, ensuring convenient and reliable access management.

NICE Digital Keypad Selector EDSI | 12 Keys | Recessed Mounting for MORX Decoder

Product Overview The Nice EDSI digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDSI keypad is recessed-mounted with a 13mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes and the ability to store up to 255 codes, the EDSI keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Recessed-mounted with 13mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes Up to 255 storable codes Product Description The Nice EDSI digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The recessed-mounted design with a 13mm depth makes it easy to install discreetly, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDSI keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The recessed-mounted design with a 13mm depth makes the EDSI keypad easy to install discreetly in various locations. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDSI can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDSI keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Recessed-mounted, 13mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDSI Mounting hardware Instructions Applications The Nice EDSI digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE Digital Keypad Selector EDS | 12 Keys | To Be Combined with the MORX Decoder

Product Overview The Nice EDS digital keypad selector is designed for secure and convenient access control. Featuring 12 keys and a wireless connection to the Nice MORX receiver decoder, this digital selector offers a high level of security with 999,999,999 possible combinations. The EDS keypad is surface-mounted with a 27mm depth and includes a backlit keypad for easy use in low-light conditions. With two programming modes - Easy and Professional - and the ability to store up to 255 codes, the EDS keypad is a versatile and reliable solution for access control. Key Features 12-key digital keypad selector Wireless connection to Nice MORX receiver decoder Surface-mounted with 27mm depth Secure 9-digit code with 999,999,999 possible combinations Backlit keypad for easy use in low-light conditions Two programming modes: Easy and Professional Up to 255 storable codes Product Description The Nice EDS digital keypad selector is an essential component for secure access control systems. Designed for use with the Nice MORX receiver decoder, this keypad provides wireless connectivity for seamless integration. The 12-key design allows for a secure 9-digit code, offering 999,999,999 possible combinations to ensure maximum security. The surface-mounted design with a 27mm depth makes it easy to install on various surfaces, while the backlit keypad ensures visibility and ease of use in low-light conditions. Secure and Versatile The EDS keypad selector is designed with security in mind, featuring a 9-digit code that allows for up to 999,999,999 possible combinations. This high level of security makes it suitable for a wide range of applications, from residential to commercial settings. The two programming modes, Easy and Professional, provide flexibility in setup and use, catering to both simple and advanced access control requirements. Easy Installation and Use The surface-mounted design with a 27mm depth makes the EDS keypad easy to install on walls, gates, or other surfaces. The wireless connection to the Nice MORX receiver decoder simplifies installation by eliminating the need for extensive wiring. Additionally, the backlit keypad ensures that the EDS can be used easily in low-light or nighttime conditions. Ample Storage for Codes With the capacity to store up to 255 codes, the EDS keypad is suitable for environments with multiple users or access points. This makes it an ideal solution for both small and large-scale access control systems, providing flexibility and ease of management. Specifications Keys: 12 Connection: Wireless to Nice MORX receiver decoder Mounting: Surface-mounted, 27mm depth Security: 9-digit code, 999,999,999 possible combinations Backlighting: Yes Programming Modes: Easy and Professional Storable Codes: Up to 255 Package Contents Digital Keypad Selector EDS Mounting hardware Instructions Applications The Nice EDS digital keypad selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, high security, and ease of use make it a valuable addition to any access control setup, ensuring secure and convenient access management.

NICE Pair of Recessed Mounting Photocells EPLIOB Large | 30-Degree Positionable | BlueBUS Connection

Product Overview The Nice EPLIOB large recessed mounting photocells are designed to enhance the safety and efficiency of automated gate and garage door systems. These photocells are positionable up to 30 degrees, providing flexible installation options. Featuring an estimated range of 15 meters and utilizing Nice BlueBUS technology, the EPLIOB photocells ensure easy connection to the control unit with a simple 2-wire, non-polarized wiring system. Key Features Large recessed mounting photocells from the new ERA series Positionable up to 30 degrees for flexible installation Estimated range of 15 meters BlueBUS technology for easy 2-wire connection Dimensions: 70x66+9x70 mm (h) Modern and durable design Flexible connection options: serial, parallel, etc. Product Description The Nice EPLIOB large recessed mounting photocells are essential safety components for automated gate and garage door systems. These photocells are designed to provide reliable obstacle detection with an estimated range of 15 meters. Their modern design and large size make them suitable for various applications, ensuring enhanced safety and security. The EPLIOB photocells are compatible with Nice BlueBUS technology, ensuring easy and efficient installation with a 2-wire, non-polarized connection system. Modern and Durable Design The EPLIOB photocells feature a sleek and modern design that complements any setting. They are built to withstand various environmental conditions, ensuring long-lasting performance. The large size and robust construction make them ideal for both residential and industrial applications. Flexible Installation with 30-Degree Positioning The ability to position the EPLIOB photocells up to 30 degrees provides greater flexibility during installation, ensuring that the photocells can be optimally placed to detect obstacles effectively. This feature makes them suitable for a wide range of applications in both residential and industrial settings. Easy Installation with BlueBUS Technology Equipped with BlueBUS technology, the EPLIOB photocells simplify the installation process by allowing all connections to the control unit and peripherals to be made using just two wires. This non-polarized wiring system reduces installation time and minimizes the risk of errors, providing a more efficient setup process. Reliable Obstacle Detection With an estimated range of 15 meters, the EPLIOB photocells offer reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their flexible connection options, including serial and parallel configurations, provide versatility in installation to suit various setups. Specifications Range: 15 meters Positionable: Up to 30 degrees Connection: BlueBUS technology, 2-wire non-polarized system Protection Rating: IP44 Dimensions: 70x66+9x70 mm (h) Material: Durable construction Mounting: Recessed mounting Connection Options: Serial, parallel, etc. Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPLIOB photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, durable construction, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Surface-Mounted Photocells EPLOB Large | 30-Degree Positionable | BlueBUS Connection

Product Overview The Nice EPLOB large surface-mounted photocells are designed to enhance the safety and efficiency of automated gate and garage door systems. These photocells are positionable up to 30 degrees, providing flexible installation options. Featuring an estimated range of 15 meters and utilizing Nice BlueBUS technology, the EPLOB photocells ensure easy connection to the control unit with a simple 2-wire, non-polarized wiring system. Key Features Large surface-mounted photocells from the new ERA series Positionable up to 30 degrees for flexible installation Estimated range of 15 meters BlueBUS technology for easy 2-wire connection Dimensions: 70x38x70 mm (h) Modern and durable design Flexible connection options: serial, parallel, etc. Product Description The Nice EPLOB large surface-mounted photocells are essential safety components for automated gate and garage door systems. These photocells are designed to provide reliable obstacle detection with an estimated range of 15 meters. Their modern design and large size make them suitable for various applications, ensuring enhanced safety and security. The EPLOB photocells are compatible with Nice BlueBUS technology, ensuring easy and efficient installation with a 2-wire, non-polarized connection system. Modern and Durable Design The EPLOB photocells feature a sleek and modern design that complements any setting. They are built to withstand various environmental conditions, ensuring long-lasting performance. The large size and robust construction make them ideal for both residential and industrial applications. Flexible Installation with 30-Degree Positioning The ability to position the EPLOB photocells up to 30 degrees provides greater flexibility during installation, ensuring that the photocells can be optimally placed to detect obstacles effectively. This feature makes them suitable for a wide range of applications in both residential and industrial settings. Easy Installation with BlueBUS Technology Equipped with BlueBUS technology, the EPLOB photocells simplify the installation process by allowing all connections to the control unit and peripherals to be made using just two wires. This non-polarized wiring system reduces installation time and minimizes the risk of errors, providing a more efficient setup process. Reliable Obstacle Detection With an estimated range of 15 meters, the EPLOB photocells offer reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their flexible connection options, including serial and parallel configurations, provide versatility in installation to suit various setups. Specifications Range: 15 meters Positionable: Up to 30 degrees Connection: BlueBUS technology, 2-wire non-polarized system Protection Rating: IP44 Dimensions: 70x38x70 mm (h) Material: Durable construction Mounting: Surface-mounted Connection Options: Serial, parallel, etc. Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPLOB photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, durable construction, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Surface-Mounted Photocells EPLB Large | BlueBUS Connection

Product Overview The Nice EPLB large surface-mounted photocells are designed to enhance the safety and efficiency of automated gate and garage door systems. These photocells feature a modern design and an estimated range of 15 meters. Utilizing Nice BlueBUS technology, they allow for easy connection to the control unit with a simple 2-wire, non-polarized wiring system, speeding up installation and minimizing errors. Key Features Large photocells from the new ERA series Estimated range of 15 meters BlueBUS technology for easy 2-wire connection IP44 protection rating Dimensions: 70x30x70 mm (h) Modern and durable design Flexible connection options: serial, parallel, etc. Product Description The Nice EPLB large surface-mounted photocells are essential safety components for automated gate and garage door systems. These photocells are designed to provide reliable obstacle detection with an estimated range of 15 meters. Their modern design and large size make them suitable for various applications, ensuring enhanced safety and security. The EPLB photocells are compatible with Nice BlueBUS technology, ensuring easy and efficient installation with a 2-wire, non-polarized connection system. Modern and Durable Design The EPLB photocells feature a sleek and modern design that complements any setting. They are built to withstand various environmental conditions, ensuring long-lasting performance. The large size and robust construction make them ideal for both residential and industrial applications. Easy Installation with BlueBUS Technology Equipped with BlueBUS technology, the EPLB photocells simplify the installation process by allowing all connections to the control unit and peripherals to be made using just two wires. This non-polarized wiring system reduces installation time and minimizes the risk of errors, providing a more efficient setup process. Reliable Obstacle Detection With an estimated range of 15 meters, the EPLB photocells offer reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their flexible connection options, including serial and parallel configurations, provide versatility in installation to suit various setups. Specifications Range: 15 meters Protection Rating: IP44 Dimensions: 70x30x70 mm (h) Material: Durable construction Connection: BlueBUS technology, 2-wire non-polarized system Mounting: Surface-mounted Connection Options: Serial, parallel, etc. Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPLB photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, durable construction, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Surface-Mounted Photocells EPL Large | 30m Range

Product Overview The Nice EPL large surface-mounted photocells are part of the new ERA series, designed to enhance the safety and efficiency of automated gate and garage door systems. With a modern design and a reach of 30 meters, these photocells are perfect for mounting on walls or pillars. They are perfectly synchronized to ensure reliable performance over a long period. Key Features Large photocells from the new ERA series 30-meter range Modern design Easy surface mounting on walls or pillars Perfect synchronization for reliable performance Durable construction for long-term use Product Description The Nice EPL large surface-mounted photocells are essential safety components for automated gate and garage door systems. These photocells are designed to provide reliable obstacle detection with a range of up to 30 meters. Their modern design and large size make them suitable for various applications, ensuring enhanced safety and security. Modern and Durable Design The EPL photocells feature a sleek and modern design that complements any setting. They are built to withstand various environmental conditions, ensuring long-lasting performance. The large size and robust construction make them ideal for both residential and industrial applications. Easy Installation and Synchronization These photocells are designed for easy surface mounting on walls or pillars. The installation process is straightforward, allowing for quick and efficient setup. The EPL photocells are perfectly synchronized, ensuring reliable performance and accurate obstacle detection over a long period. Reliable Obstacle Detection With a reach of 30 meters, the EPL photocells provide reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their synchronization ensures that they perform well in various conditions, preventing false detections and ensuring smooth operation. Specifications Range: 30 meters Design: Modern and large Mounting: Surface-mounted on walls or pillars Synchronization: Perfectly synchronized for long-term performance Material: Durable construction Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPL photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, modern design, and reliable performance make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Outdoor Photocells EPMAOB | 30-Degree Positionable | Burglar Resistant Metal Body

Product Overview The Nice Era EPMAOB photocells are designed for enhanced safety and reliability in automated gate and garage door systems. These medium-sized, recessed photocells feature a burglar-resistant metal body and an estimated range of 15 meters. The EPMAOB photocells are positionable up to 30 degrees, providing flexible installation options. Utilizing BlueBUS technology, they allow for easy connection to the control unit with a simple 2-wire, non-polarized wiring system, speeding up installation and minimizing errors. Key Features Burglar-resistant metal body 30-degree positionable for flexible installation Estimated range of 15 meters IP44 protection rating Dimensions: 50x38x80 mm (h) BlueBUS technology for easy 2-wire connection Flexible connection options: serial, parallel, etc. Product Description The Nice Era EPMAOB photocells are essential safety devices for automated gate and garage door systems. Designed with a burglar-resistant metal body, these medium-sized recessed photocells provide reliable obstacle detection with an estimated range of 15 meters. The EPMAOB photocells are compatible with Nice BlueBUS technology, ensuring easy and efficient installation with a 2-wire, non-polarized connection system. Durable and Secure Design The EPMAOB photocells feature a robust metal body that is resistant to tampering and harsh environmental conditions. Their IP44 protection rating ensures durability and reliable performance in various weather conditions, making them suitable for outdoor use. Flexible Installation The ability to position the EPMAOB photocells up to 30 degrees provides greater flexibility during installation, ensuring that the photocells can be optimally placed to detect obstacles effectively. This feature makes them suitable for a wide range of applications in both residential and industrial settings. Easy Installation with BlueBUS Technology Equipped with BlueBUS technology, the EPMAOB photocells simplify the installation process by allowing all connections to the control unit and peripherals to be made using just two wires. This non-polarized wiring system reduces installation time and minimizes the risk of errors, providing a more efficient setup process. Reliable Obstacle Detection With an estimated range of 15 meters, the EPMAOB photocells offer reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their flexible connection options, including serial and parallel configurations, provide versatility in installation to suit various setups. Specifications Range: 15 meters Protection Rating: IP44 Dimensions: 50x38x80 mm (h) Material: Metal body Connection: BlueBUS technology, 2-wire non-polarized system Mounting: Recessed Positionable: Up to 30 degrees Connection Options: Serial, parallel, etc. Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPMAOB photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, durable construction, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Outdoor Photocells EPMAB | BlueBUS Connection | Burglar Resistant Metal Body

Product Overview The Nice Era EPMAB photocells are designed for enhanced safety and reliability in automated gate and garage door systems. These medium-sized, surface-mounted photocells feature a burglar-resistant metal body and an estimated range of 15 meters. The EPMAB photocells utilize BlueBUS technology, allowing for easy connection to the control unit with a simple 2-wire, non-polarized wiring system. This design speeds up installation and minimizes errors. Key Features Burglar-resistant metal body BlueBUS technology for easy 2-wire connection Estimated range of 15 meters IP44 protection rating Dimensions: 50x31x80 mm (h) Flexible connection options: serial, parallel, etc. Product Description The Nice Era EPMAB photocells are essential safety devices for automated gate and garage door systems. Designed with a burglar-resistant metal body, these medium-sized photocells are surface-mounted and provide reliable obstacle detection with an estimated range of 15 meters. The EPMAB photocells are compatible with Nice BlueBUS technology, ensuring easy and efficient installation with a 2-wire, non-polarized connection system. Durable and Secure Design The EPMAB photocells feature a robust metal body that is resistant to tampering and harsh environmental conditions. Their IP44 protection rating ensures durability and reliable performance in various weather conditions, making them suitable for outdoor use. Easy Installation with BlueBUS Technology Equipped with BlueBUS technology, the EPMAB photocells simplify the installation process by allowing all connections to the control unit and peripherals to be made using just two wires. This non-polarized wiring system reduces installation time and minimizes the risk of errors, providing a more efficient setup process. Reliable Obstacle Detection With an estimated range of 15 meters, the EPMAB photocells offer reliable obstacle detection, enhancing the safety and efficiency of automated systems. Their flexible connection options, including serial and parallel configurations, provide versatility in installation to suit various setups. Specifications Range: 15 meters Protection Rating: IP44 Dimensions: 50x31x80 mm (h) Material: Metal body Connection: BlueBUS technology, 2-wire non-polarized system Mounting: Surface-mounted Connection Options: Serial, parallel, etc. Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPMAB photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, durable construction, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Outdoor Photocells EPMO | 30-Degree Positionable | 15m Range

Product Overview The Nice Era EPMO medium photocells are part of the Era mid-size relay photocell range, offering advanced safety features for automated gate and garage door systems. These synchronized photocells are positionable up to 30 degrees, providing flexible installation options. With an estimated range of 15 meters and a 10-degree angle of reception, the EPMO photocells are designed to deliver reliable performance in various conditions. Key Features Positionable up to 30 degrees for flexible installation Estimated range of 15 meters 10-degree angle of reception Antiglare circuit to eliminate sunlight interference Durable ABS body resistant to all conditions IP44 protection rating Part of the Era mid-size relay photocell range Product Description The Nice Era EPMO medium photocells are designed to enhance the safety and reliability of automated gate and garage door systems. These photocells are positionable up to 30 degrees, allowing for versatile installation and optimal obstacle detection. The EPMO photocells feature a durable ABS body and an antiglare circuit to ensure consistent performance in various weather conditions. Flexible Installation The ability to position the EPMO photocells up to 30 degrees provides greater flexibility during installation, ensuring that the photocells can be optimally placed to detect obstacles effectively. This feature makes them suitable for a wide range of applications in both residential and industrial settings. Reliable Obstacle Detection With an estimated range of 15 meters and a 10-degree angle of reception, the EPMO photocells offer reliable obstacle detection. The antiglare circuit helps to eliminate potential interference from sunlight, ensuring accurate and dependable performance at all times. Durable and Weather-Resistant The EPMO photocells are constructed with a durable ABS body that is resistant to various weather conditions. Their IP44 protection rating further enhances their suitability for outdoor use, providing long-lasting reliability and performance. Specifications Range: 15 meters Angle of Reception: 10 degrees Positionable: Up to 30 degrees Antiglare Circuit: Yes Material: ABS body Protection Rating: IP44 Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPMO photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, flexible installation options, and reliable performance make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Outdoor Photocells EPM | 15m Range |

Product Overview The Nice Era EPM medium-sized outdoor photocells are designed with self-alignment technology, making them perfect for residential and industrial settings. These photocells feature a stylish and sturdy design, offering reliable obstacle detection with a range of up to 15 meters and an 8-degree receiving angle.  Key Features Medium-sized photocells with self-alignment technology 15-meter range with an 8-degree angle of reception Antiglare circuit to eliminate sunlight interference Stylish and sturdy ABS body, resistant to all conditions Relay photocell with a power supply of 14 VAC/DC Product Description The Nice Era EPM photocells are essential for enhancing the safety and efficiency of automated gate and garage door systems. Designed for both residential and industrial applications, these photocells offer a range of up to 15 meters and feature self-alignment technology for easy setup. The 8-degree receiving angle ensures accurate detection of obstacles, while the antiglare circuit prevents interference from sunlight. Stylish and Sturdy Design The EPM photocells boast a stylish and sturdy design with an ABS body that is resistant to various weather conditions. This durability ensures long-lasting performance, making them suitable for both indoor and outdoor installations. Reliable Obstacle Detection The EPM photocells provide reliable obstacle detection, enhancing the safety of automated systems by preventing accidents and ensuring smooth operation. The relay photocell design ensures that any interruption in the light beam will change the receiver's status, sending a signal to stop or reverse the gate or door. Specifications Range: 15 meters Angle of Reception: 8 degrees Antiglare Circuit: Yes Material: ABS body Power Supply: 14 VAC/DC Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPM photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, reliable performance, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

Pair of Outdoor Burglar-Resistant BlueBUS Photocells with Metal Body | Nice EPSAB

Product Overview The Nice EPSAB BlueBUS Photocells are advanced, burglar-resistant photocells designed to enhance the safety and security of automated garage doors and gates. Featuring a durable aluminum reinforced housing and a range of up to 15 meters, these photocells provide reliable obstacle detection and are essential for any automated system. The BlueBUS system ensures easy installation with just two wires connecting the controller and accessories. Key Features Burglar-resistant design with reinforced aluminum housing Compatible with Nice BlueBUS system Range of up to 15 meters under normal conditions Self-alignment feature for easy installation Slim design for unobtrusive placement Relay contact signal when photocell beam is engaged Includes receiver and transmitter modules Simple two-wire connection for controller and accessories Product Description The Nice EPSAB BlueBUS Photocells are essential safety devices for any automated gate or garage door system. With a range of up to 15 meters and a burglar-resistant metal body, these photocells ensure reliable obstacle detection and enhance the security of your property. The self-alignment feature simplifies installation, and the BlueBUS system allows for easy connections using just two wires. Durable and Secure Design The EPSAB photocells feature a reinforced aluminum housing, providing enhanced durability and resistance to tampering. This makes them an excellent choice for high-security applications, ensuring that your automated system remains safe and reliable. Advanced Functionality Equipped with a self-alignment feature, the EPSAB photocells are easy to install and adjust, ensuring accurate detection of obstacles. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring the gate or door stops or reverses to avoid collisions. Easy Installation with BlueBUS The BlueBUS system simplifies the installation process by allowing all connections between the controller and accessories to be performed using just two wires. This reduces installation time and effort, making the EPSAB photocells a convenient and efficient choice for any automated system. Specifications Range: Up to 15 meters Compatibility: Nice BlueBUS system Material: Reinforced aluminum housing Design: Slim Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPSAB BlueBUS Photocells are ideal for use in residential, commercial, and industrial automated gate and garage door systems. Their burglar-resistant design and reliable performance make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Slim Outdoor Photocells EPS | Estimated 15m Range | Burglar-Resistant

Product Overview The Pair of Slim Outdoor Photocells EPS from NICE are essential safety devices designed for use with automated garage doors and gates. Featuring an estimated range of 15 meters and a burglar-resistant version, these synchronized photocells provide reliable obstacle detection and enhanced security. The package includes a receiver module, transmitter module, assembly screws, and instructions for easy installation. Key Features Estimated range of 15 meters Slim design for easy installation Synchronized for enhanced reliability Burglar-resistant version available Essential for safety in automated garage doors and gates Includes receiver and transmitter modules Simple installation with included screws and instructions Relay contact signal when photocell beam is engaged Product Description The Slim Outdoor Photocells EPS from NICE are designed to enhance the safety and security of your automated garage door or gate system. These synchronized photocells, available in a burglar-resistant version, detect obstacles by sensing the interruption of a light beam between the transmitter and receiver modules. Enhanced Safety and Security The EPS photocells are an essential safety component for any automated garage door or gate. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring that the door or gate stops or reverses to avoid collisions. Reliable Performance With an estimated range of 15 meters, the EPS photocells provide reliable performance under normal conditions. The synchronized design ensures accurate detection, and the burglar-resistant version adds an extra layer of security, making it more difficult for intruders to bypass the system. Easy Installation The slim design of the EPS photocells allows for easy and unobtrusive installation. The package includes all necessary components, such as the receiver and transmitter modules, assembly screws, and detailed instructions, making the installation process straightforward and hassle-free. Specifications Range: Estimated 15 meters Design: Slim Usage: Outdoor Type: Synchronized, burglar-resistant Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Slim Outdoor Photocells EPS are ideal for use in residential, commercial, and industrial automated garage door and gate systems. Their reliable performance and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

Safety Photocells BLUEBus EPMB | Obstacle Detection for Nice Automation Range

Product Overview The Safety Photocells BLUEBus EPMB are designed exclusively for the Nice Automation range. These fixed synchronized wired photocells utilize BlueBUS technology to detect obstacles on the optical axis between a transmitter (TX) and a receiver (RX). Compliant with Standard EN12453 (type D), the EPMB Photocells provide reliable obstacle detection, ensuring the safety of your automated gates and doors. Key Features Compatible only with the Nice Automation range Fixed synchronized wired photocells with BlueBUS technology Detect obstacles on the optical axis between transmitter (TX) and receiver (RX) Type D according to Standard EN12453 BlueBUS communication system for easy connection Power supply and signal transmission via two wires Product Description The Safety Photocells BLUEBus EPMB are essential components for enhancing the safety of your automated gates and doors. These photocells work by detecting obstacles that interrupt the optical axis between the transmitter (TX) and the receiver (RX). The EPMB Photocells are specifically designed for compatibility with the Nice Automation range, ensuring seamless integration and reliable performance. Advanced BlueBUS Technology Equipped with the Nice BlueBUS communication system, the EPMB Photocells allow for easy and efficient connection to control units using just two wires. This simplifies installation and reduces the amount of wiring required, making it a convenient solution for both new installations and upgrades. Reliable Obstacle Detection The EPMB Photocells are classified as type D according to Standard EN12453, providing dependable obstacle detection. This ensures that your automated systems can respond promptly to any obstructions, enhancing safety for users and preventing damage to the gates or doors. Specifications Technology: BlueBUS Compatibility: Nice Automation range only Obstacle detection: Optical axis interruption between TX and RX Standard compliance: EN12453 (type D) Connection: Two wires for power supply and signal transmission Easy Installation The BlueBUS technology used in the EPMB Photocells simplifies the installation process. By utilizing just two wires for both power supply and signal transmission, the need for extensive wiring is eliminated, making the setup straightforward and efficient.

NICE Control panel and enclosure Mindy A02

Nice Mindy A Control Unit for one 230 Vac motor, for rolling shutters, with semi-automatic and automatic closing feature, flashing light output and with built-in receiver compatible with the Flo, FloR and Smilo series of transmitters

NICE Control panel and enclosure Mindy A01

Nice Mindy A Control Unit for one 230 Vac motor, for rolling shutters, without automatic closing feature, with built-in receiver compatible with the Flo, FloR and Smilo series of transmitters

Nice FLO4 | 4-Button Remote Transmitter | 433.92 MHz Rolling Code

Product Overview The Nice FLO4 remote transmitter is a reliable and advanced remote control designed for use with Nice automation systems. This versatile remote can operate opening devices for gates, garage doors, roller shutters, and more. As part of the Nice Era FLOR series of transmitters, it ensures secure and efficient operation of your automated systems. Key Features Remote Frequency: 433.92 MHz Coding Type: Rolling code for enhanced security Includes batteries and instructions for easy setup Self-learning capabilities for quick programming Multi-user management with unique personal codes 4-channel programmable code transmitter Product Description Nice FLO4 | 4-Button Remote Transmitter | 433.92 MHz Rolling Code The Nice FLO4 is a branded remote control designed to integrate seamlessly with Nice automation systems. It is ideal for operating a variety of devices including gates, garage doors, and roller shutters. This 4-button remote transmitter operates at a frequency of 433.92 MHz and uses a rolling code system for enhanced security. The FLO4 is part of the Nice Era FLOR series and is compatible with all receivers using the FLO-R coding system. Features: Remote Frequency: 433.92 MHz Coding Type: Rolling code Included: Batteries and instructions Convenience: Self-learning capabilities for quick and easy programming Multi-user Management: Unique personal codes for multiple users Channels: 4-channel programmable code transmitter For compatibility, ensure your existing remote has a blue cover and a row of 10 white switches inside. If your remote does not match this description, you may need the Nice FLO4R remote. Please Note: It is important to verify that this is the correct remote for your needs, as other series remotes may look similar but use different coding systems.