NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

NICE Mindy A924 Control Panel | For DC Motors with Encoder | Safety and Efficiency Features

Product Overview The Mindy A924 control panel is tailored for 24V DC motors, equipped with encoders to optimize gate automation by enhancing safety and operational efficiency. Product Description This control panel facilitates smooth and safe gate operation with advanced control features and built-in diagnostics tools. It's designed to manage single dc motor gates, providing a seamless user experience with its intelligent features and maintenance indicators. Key Features Designed for 24V DC motors with encoders. Intelligent clutch with anti-crush safety feature. Automatic memorization of limit switches for precise gate movement. Gradual departure and slowdown for smooth operation. Pedestrian passage function for convenient access. Programmable maintenance warning light. Built-in battery charger for uninterrupted operation. Pull-out terminal boards for easy maintenance and setup. What's in the Box Mindy A924 control panel, user manual, warranty card, mounting accessories. Specifications Voltage 24V DC Motor Compatibility Single DC motor with encoder Safety Features Anti-crush intelligent clutch, automatic limit switch memorization Additional Features Slowdown on operation, pedestrian function, built-in battery charger

Moonclever MC824H Control Panel | For Nice 24Vdc Swing Gate Motors | Advanced Features with Opera System

Product Overview The Moonclever MC824H control panel is designed for optimal control of Nice 24 Vdc swing gate motors. It integrates seamlessly with the Solemyo solar power system and the Opera management system, offering advanced features and remote diagnostics capabilities. Product Description This state-of-the-art control unit supports the latest technological innovations, including Nice BlueBUS technology, allowing easy connection of multiple devices. Its design is geared towards enhancing user interaction and gate management, providing a user-friendly interface with extensive customization options. Key Features Compatibility with Nice 24 Vdc gear motors and Solemyo solar power system. Supports Opera system for advanced management and programming. Equipped with BlueBUS technology for connecting up to 12 devices with two cables. Advanced obstacle detection with dual technology for increased safety. Microprocessor logic with self-learning of travel limits and pedestrian mode. Deceleration on opening and closing to ensure smooth, quiet operation. What's in the Box Moonclever MC824H control unit, installation manual, warranty card. Specifications Power Supply 24Vdc Technology Nice BlueBUS, Magnetic Encoder Safety Features Obstacle Detection, Anti-crushing Clutch Compatibility Nice Solemyo, Opera System Control Unit Dimensions Specified in the manual