NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

NICE BiDi-Shutter | Interior Bidirectional Interface for Tubular Motors

 Product Overview The BiDi-Shutter is an advanced bidirectional interface designed for integrating mechanical tubular motors of interior shutters and outdoor awnings into your smart home system. This interface allows for individual, group, or scenario control of connected motors, providing real-time feedback on automation status and efficient energy management to reduce waste. The BiDi-Shutter enhances comfort by protecting indoor environments from excessive sunlight and reducing the need for air conditioning. Key Features Control connected motors individually, in groups, or in scenarios Receive real-time feedback on automation status Manage electrical loads and reduce energy waste Voice control via Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment using Yubii or MyNice apps Enhance indoor comfort by protecting against heat and reducing air conditioning use Fast programming of limit switches and continuous automatic calibration Set two intermediate opening positions based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors No gateway required for controlling Venetian blinds, rolling shutters, and awnings Each bidirectional product acts as a radio signal repeater to extend signal coverage Product Description Smart Home Integration BiDi-Shutter allows seamless integration of tubular motors into your smart home system, enabling comprehensive control and management. You can control the connected motors using voice commands through Amazon Alexa, Google Home, or Siri Shortcuts. Additionally, the Yubii and MyNice apps provide remote management capabilities via your smartphone, smartwatch, or car infotainment system. Energy Efficiency and Comfort By managing electrical loads and controlling consumption, BiDi-Shutter helps reduce energy waste. It also protects your indoor environment from excessive heat, making the climate more comfortable and minimizing the need for air conditioning. This contributes to energy savings and enhances overall comfort. Easy Programming and Compatibility Programming the limit switches is fast and straightforward, requiring just two complete maneuvers. The system ensures continuous automatic calibration during operation. You can set two intermediate opening positions based on sun sensor settings, allowing for optimal sunlight control. BiDi-Shutter is compatible with both unidirectional and bidirectional remote controls and climate sensors, offering flexibility in control options. Reliable and Efficient Each bidirectional product in the BiDi-Shutter system acts as a radio signal repeater, extending signal coverage and ensuring reliable operation. This makes the system efficient and effective in controlling various types of window coverings, including Venetian blinds, rolling shutters, and awnings, without the need for a separate gateway. Usage Instructions Install the BiDi-Shutter interface according to the provided manual. Pair the interface with your smart home system and configure the settings using the Yubii or MyNice apps. Set the desired opening positions and control the tubular motors using voice commands or remote controls. Regularly check the system for updates and ensure all components are functioning correctly. Dimensions Compact and designed for easy installation, the BiDi-Shutter interface fits seamlessly into your existing smart home setup. Safety and Maintenance Ensure the BiDi-Shutter interface is installed in a suitable location, protected from moisture and excessive heat. Regularly check for firmware updates to maintain optimal performance. Keep the interface and connected devices clean and free from obstructions.

NICE Bi-Di-Awning | Exterior Bidirectional Interface for Tubular Motor

Product Overview The Bi-Di-Awning is an exterior bidirectional interface designed for tubular motors of outdoor awnings. It enables seamless integration of mechanical tubular motors into smart home systems, offering individual, group, or scenario control. The interface provides feedback on automation status, helps manage electrical loads, and reduces energy waste. The Bi-Di-Awning is compatible with voice commands via Amazon Alexa, Google Home, and Siri Shortcuts, and can be managed remotely through the Yubii or MyNice apps. Key Features Exterior bidirectional interface for tubular motors Control connected motors individually, in groups, or in scenarios Receive feedback on automation status Manage electrical loads to reduce energy waste Compatible with Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment Protect indoor environments from the heat of the sun Fast programming of limit switches from the transmitter Set two intermediate opening positions Program partial opening based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors Control Venetian blinds, rolling shutters, and awnings without a gateway Acts as a radio signal repeater to extend coverage Product Description Bi-Di-Awning Exterior Bidirectional Interface for Tubular Motors The Bi-Di-Awning interface integrates mechanical tubular motors of outdoor awnings into your smart home system, allowing for comprehensive control and management. Whether you need to control the motors individually, in groups, or as part of a scenario, the Bi-Di-Awning provides the flexibility and functionality you need. Smart Home Compatibility Enjoy the convenience of controlling your awnings through voice commands with Amazon Alexa, Google Home, and Siri Shortcuts. Manage your devices remotely using the Yubii or MyNice apps on your smartphone, smartwatch, or car infotainment system. Efficient Energy Management The Bi-Di-Awning helps reduce energy waste by controlling consumption and managing electrical loads effectively. Protect your indoor environment from the heat of the sun, making your climate more comfortable and cutting back on air conditioning use. Advanced Programming and Compatibility The interface allows for fast programming of limit switches directly from the transmitter by performing two complete manoeuvres, ensuring continuous automatic calibration. You can set two intermediate opening positions and program partial openings based on sun sensor settings. The Bi-Di-Awning is compatible with both unidirectional and bidirectional remote controls and climate sensors, making it a versatile solution for controlling Venetian blinds, rolling shutters, and awnings without the need for a gateway. Enhanced Signal Coverage Each bidirectional product acts as a radio signal repeater, extending the signal coverage and ensuring reliable communication across your system.

Module to Control Automation Systems and Sun Sensor Activation Command Niceway WM080G

Niceway module to control 80 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.

NICE Module to Control Automation Systems and Sun Sensor Activation WM004G

Niceway module to control 4 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.  

NICE Radio Digital Selector EDSWG | Wireless | Compatible with FLOR Series Receivers

Product Overview The Nice EDSWG radio digital selector is a compact and convenient access control device designed for compatibility with the receivers of the FLOR series. Featuring 13 keys and a backlit keypad, this wireless selector operates on a secure 433.92 MHz frequency with FLOR 52 bit self-learning rolling code for enhanced security. The EDSWG is surface-mounted with a depth of 27mm and is housed in a vandal-proof and weather-proof IP54 metal casing, ensuring durability and reliability in various conditions. Key Features 13-key surface-mounted backlit keypad Compact design with 27mm depth and 70mm length/width Acoustic feedback when buttons are pressed 100% wireless, no cables or wiring required Vandal-proof and weather-proof IP54 metal casing Operates in temperatures from -10°C to +55°C Three transmission channels for controlling separate systems or commands 433.92 MHz frequency FLOR 52 bit self-learning rolling code with up to 4.5 trillion combinations Opera radio coding Range of 25 meters in open space and 15 meters inside a building Energy-efficient design with ambient light sensor Automated turn-off when not in use, reactivates when a button is pressed Approximately 2 years of battery life (based on 10 transmissions a day) Operates using 2 x 3v CR2430 “coin style” batteries Product Description The Nice EDSWG radio digital selector is an essential component for secure and convenient access control. Designed for compatibility with FLOR series receivers, this 13-key selector offers wireless operation with no cables or wiring required. The backlit keypad and compact design (27mm depth and 70mm length/width) ensure ease of use and installation. The EDSWG provides acoustic feedback when buttons are pressed, enhancing user experience. Secure and Reliable The EDSWG operates on a 433.92 MHz frequency using FLOR 52 bit self-learning rolling code, offering up to 4.5 trillion combinations for enhanced security. The device supports three transmission channels, allowing for control of separate systems or different commands within a single automated system. The Opera radio coding ensures secure and reliable communication. Durable and Weather-Proof Encased in a vandal-proof and weather-proof IP54 metal casing, the EDSWG is designed to withstand harsh environmental conditions, ensuring long-lasting durability. The selector operates effectively in temperatures ranging from -10°C to +55°C, making it suitable for various installation environments. Energy Efficient The EDSWG features an ambient light sensor that activates keypad lighting only when necessary, significantly reducing energy consumption. The device also includes an automated turn-off function when not in use, reactivating whenever a button is pressed. With an estimated battery life of approximately 2 years (based on 10 transmissions per day), the EDSWG is highly energy-efficient. Specifications Keys: 13 Connection: Wireless to FLOR series receivers Mounting: Surface-mounted, 27mm depth Frequency: 433.92 MHz Coding: FLOR 52 bit self-learning rolling code Range: 25 meters in open space, 15 meters inside a building Protection Rating: IP54 Operating Temperature: -10°C to +55°C Battery Life: Approximately 2 years Power Supply: 2 x 3v CR2430 “coin style” batteries Package Contents Radio Digital Selector EDSWG Mounting hardware Instructions Applications The Nice EDSWG radio digital selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, secure operation, and ease of use make it a valuable addition to any automated setup, ensuring convenient and reliable access management.

NICE Portable Unit O-View | Programming and Diagnostics for BUS T4 Devices

Product Overview The Portable Unit O-View is a versatile device designed for control, programming, and diagnostics of devices equipped with a BUS T4 connection. It can be used on-site or remotely via GPRS when connected to your PDA, Smartphone, or PC. The O-View provides a straightforward and intuitive interface for accessing and adjusting all control unit parameters, making it an essential tool for installation, maintenance, and centralized management of automation systems. Key Features Compatible with devices equipped with a BUS T4 connection Direct connection via BUS T4 cable (supplied) Multi-function display for easy access to control unit parameters Intuitive programming mode with simple menus Remote management via GPRS with PDA, Smartphone, or PC Creates a network for local or remote centralized management Automatic device recognition and relevant parameter display Built-in clock with integrated backup battery for scheduled commands Practical wall-mounted support included Two-level protection with user and installer passwords Product Description The O-View Portable Unit is designed to facilitate the control, programming, and diagnostics of devices equipped with a BUS T4 connection. This multi-functional display unit connects directly to the compatible control unit using the supplied BUS T4 cable, granting access to all control unit parameters. This capability allows you to adapt the system to meet various needs through a single, simple programming mode with intuitive menus, eliminating the need to consult specific instructions. Advanced Control and Management By connecting the O-View permanently to a control unit or a group of control units via BUS T4, you can create a network for local or remote centralized management. The O-View powers up and automatically recognizes all devices on the network, displaying only the specific parameters needed for each device, thus eliminating any irrelevant or redundant information. Scheduling and Automation The built-in clock, equipped with an integrated backup battery, allows for the programming of command delivery at set times. This feature is perfect for automating the opening and closing of complex industrial and commercial systems or for creating “scenarios”. The practical wall-mounted support (supplied) adds convenience, allowing you to place the O-View in an optimal location for easy access and operation. Enhanced Security The O-View offers two levels of protection via user and installer passwords, ensuring differentiated access to more reserved functions and increased safety. This security measure guarantees that only authorized personnel can access sensitive settings and perform critical adjustments. Specifications Connection type: BUS T4 Compatibility: PDA, Smartphone, PC for remote management Display: Multi-function, intuitive interface Clock: Built-in with integrated backup battery Security: User and installer password protection Support: Wall-mounted support included Use Cases The O-View can be used temporarily for programming and maintenance or installed permanently on-site to take full advantage of local or remote centralized management. Its portability and comprehensive functionality make it a valuable tool for installers and maintenance personnel in industrial and commercial environments.