BENINCA BOB.50SR, Multi position bracket (BOB50 only)

BOB.50SR, Multi position bracket (BOB50 only)

Control Board for BENINCA BILL Motors

LOCINOX VITA | Mechanical Code Lock | Swing Gates | Surface Mounted

Product Overview The Locinox VITA is a mechanical surface-mounted code lock designed for swing gates equipped with an insert lock. Featuring a robust aluminium housing and a stainless steel mechanism, this keypad provides simple, maintenance-free access control without any wiring or batteries. The PIN code can be easily changed or removed without dismantling, and both entry and exit codes can be set independently. Available as a double-sided version with a keypad on both sides, or a single-sided version with one keypad and free exit via handle. Available as a standalone code lock or as a complete kit. Kit versions include the VITA code lock, a compatible Locinox insert lock (FORTYLOCK for 40mm profiles, FIFTYLOCK for 50mm profiles), and a matching strike keep — everything needed for a complete installation. Key Features Mechanical surface-mounted code lock — no wiring or batteries required Compatible with Locinox FORTY-, FIFTY-, SIXTY- and EIGHTYLOCK insert locks Double-sided keypad or single-sided keypad with cover plate and free exit Independent entry and exit codes can be set separately Easy and fast code setup or modification without dismantling Integrated security press plate to prevent code detection Anodised aluminium housing (silver) or fine textured powder coating (black, RAL 9005) Stainless steel mechanism tested for over 500,000 operating cycles Corrosion resistant — over 1,000 hours salt spray test (ISO 9227) Left-right adjustable Automatic code reset after handle operation Suitable for gate profiles 40 mm and above Kit versions include insert lock and strike keep for complete installation Product Description Specifications FeatureDetails Material Stainless steel mechanism with aluminium housing Finish (Black) Fine textured powder coating (RAL 9005), Qualicoat standard. Black anodised aluminium buttons. Finish (Silver) Anodised aluminium housing. Stainless steel buttons. Corrosion Resistance Over 1,000 hours salt spray test (ISO 9227) Compatible Insert Locks FORTYLOCK, FIFTYLOCK, SIXTYLOCK, EIGHTYLOCK (included in kit versions) Gate Profile Flat or square profiles, 40 mm and above Cylinder Type Euro profile (VSZ) keyed to differ Tested Movements 500,000 cycles Installation Surface mounted using two bolts Left-Right Adjustable Yes Warranty 3 years What's Included VersionIncludes Single sided VITA code lock with one keypad and free exit cover plate, euro profile cylinder Double sided VITA code lock with keypad on both sides, euro profile cylinder Single sided Kit Single sided VITA code lock + compatible insert lock + strike keep Double sided Kit Double sided VITA code lock + compatible insert lock + strike keep Installation The VITA is mounted to the gate profile using two bolts, with minimal profile preparation required. The access code can be configured and changed quickly without dismantling the lock or keypad. An installation video is available from Locinox. Usage Instructions Enter the PIN code on the keypad to operate the connected insert lock. On double-sided versions, independent codes can be set for entry and exit. On single-sided versions, exit is via the handle on the inside with no code required. The code resets automatically after each handle operation. The integrated security press plate must be pressed before entering the code to prevent bystanders from detecting button patterns. Configurations The VITA is available in Silver (anodised) and Black (RAL 9005 powder coated). Choose between single-sided (one keypad with free exit) or double-sided (keypad on both sides). Available for 40 mm and 50 mm gate profiles. All variants include a euro profile cylinder keyed to differ. Kit versions bundle everything needed for a complete gate lock installation. Safety and Maintenance The VITA is entirely maintenance-free thanks to its robust mechanical design. Periodically check that the keypad buttons move freely and that the connected insert lock operates smoothly. Ensure the security press plate functions correctly. Designed and manufactured in Europe.

DEA LINE Photocells

DEA LINE Range Photocells LINE-X LINE-X/L LINE-X/LB Photocells are wall-mounted external safety accessories that help to make automations even more reliable.  The devices are always sold in pairs and cover a maximum distance of 20m. If necessary, the operation of photocells powered with alternating voltage can be synchronized to prevent transmitters and receivers of different pairs from interfering with each other. Some models in the DEA photocell range are equipped with adjustable optics, a useful element when photocells are not perfectly aligned.

CDVI Promi Multi-Technology standalone reader & Keypad with wiegand output (125kHz, 13.56Mhz)

Promi is a multi-technology keypad + reader with flexible standalone expansion, Wiegand output, choice of access modes, and LED indication. The Promi is a versatile access control solution that combines security, ease of use, and flexibility in one single device. Whether you need a standalone system or want to integrate it into an online access control unit, the Promi keypad allows for both. Using multi-format frequencies, it is compatible with all CDVI credentials operating at 125 kHz or 13.56 MHz. The user is able to authenticate using PIN only, card only, card + PIN, or multi-user access. Suited for outdoor installations, the Promi is versatile and fits many environments.

Akuvox A08 - IP Silmline Access Control Reader with QR Code Reader, Keypad, RFID & Bluetooth (Surface)

A08 Minimal Footprint, Mighty Unlocking A08, iF Design Award 2025 Winner, is a cutting-edge access control terminal featuring a compact profile and advanced unlocking capabilities, ensuring robust security without compromising efficiency.     A08 Specification Physical & Power Front panel: Toughened GlassFrame: Aluminum AlloyRFID card reader: 13.56MHz & 125kHzRelay out: 1Inputs: 2Wiegand: SupportRS485: SupportSpeaker: 8Ω / 0.5WTamper proof alarm: SupportEthernet port: RJ45, 10/100Mbps adaptive12V DC connector (if not using PoE)Power output: 12V 600mAIP Level: IP65IK Rating: IK09Installation: Flush-mounted or Wall-mountedDimension: 50 x 140 x 26.7 (mm)Working Humidity: 10~90%，no condensingWorking Temperature: -20°C ~ +55°CStorage Temperature: -30°C ~ +70°C Networking & Protocol Protocols support: IPv4, HTTP, HTTPS, FTP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP Deployment & Maintenance Auto-ProvisioningWeb management portalWeb-based packet dumpConfiguration backup / restoreFirmware upgradeAkuvox Cloud managementAkuvox SDMC & ACMS Door Entry Feature Access scheduleAccess level managementSupport switch to reader modeDoor access logsFlexible shift scheduling and attendance management Application Scenario Provides access control for buildings such as condominiums, apartment buildings, office buildings, gated communities and industrial buildings

BPT UK MTMNA Access Control Keypad Module

MTMNA Keypad module with access control Technical data Dimensions (mm) 85 x 85 x 35 Packaging dimensions (mm) 156 x 57 x 110 Power supply (V) 12 – 24 AC/DC Consumption in stand-by mode (mA) 35 Max. absorption (mA) 90 Operating temperature (°C) -25 ÷ +55 Protection rating (IP) 54

CAME ZLX230P 230v Multifunction control panel

801QA-0110 - ZLX230P Basic version multifunction control panel, with 230 V AC power supply, for 230 V double-leaf swing gates, with programming and signaling display, self-diagnosis of safety devices, Digital Torque Control, 2 safety inputs and storage for up to 250 users . Technical data Power supply (V – 50/60 Hz) 220 AC ÷ 240 AC Power supply to motor (V) 220 AC ÷ 240 AC Power (W) 1100 Stand-by consumption (W) 0,8 Operating temperature (°C) -20 ÷ +55 Protection rating (IP) 54

NICE SOLEMYO-KIT | Solar Power Kit for 24V Automation | 15W Panel / 20Ah Battery | 24V

Product Overview The SOLEMYO-KIT is a comprehensive solar power solution designed for gate, garage door, and road barrier automation systems. This self-contained kit enables installations in remote locations without mains power connection or excavation requirements. The system combines high-efficiency photovoltaic technology with extended battery reserves to ensure reliable operation even during prolonged overcast conditions. Key Features Complete solar power system for 24V automation systems Installable anywhere without mains power connection No excavation or wiring required for power supply Extended energy reserves for continuous operation Low power consumption design Weather-resistant components LED indication of full charge status Alternative mains charging capability Environmentally friendly clean energy solution Compatible with all Nice 24V automation systems Carrying handles for easy transportation Smart charging control circuit Specifications ComponentParameterValue PSY24 Battery Box Voltage (V) 24 Maximum Current (A) 10 Battery Capacity (Ah) 20 Protection Class IP44 Operating Temperature (°C) -20 to +50 Dimensions (mm) 235 x 170 x 258h Weight (kg) 14 SYP Solar Panel Maximum Power (Wp) 15 System Voltage (V) 24 Operating Temperature (°C) -40 to +85 Dimensions (mm) 390 x 28 x 415h Weight (kg) 1.9 SYA1 Mains Adapter Power Supply (VAC) 110-240 50/60Hz Maximum Power (W) 60 Operating Temperature (°C) 0 to +40 Dimensions (mm) 132 x 58 x 30h Weight (kg) 0.345 Accessories Kit includes: 1x SYP photovoltaic solar panel (15W, 24V) 1x PSY24 battery box with control circuit and carry handles 1x SYA1 mains adapter for manual charging Charging control circuit with LED indicators Installation hardware and documentation Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

ROGER TECHNOLOGY LT301 - Chain Drive Kit for Opening up to 360°

Product Overview: Levers for opening up to 360°.

CAME SEL Digital Surface Mounted Keypad including Control Card

SEL Digital Surface Mounted Keypad including Control Card  

BEA LZR-PS - Power supply for 2x LZR Sensors

Product Overview This 24V DC 0.75A power supply is designed specifically for BEA LZR laser safety sensors. A single unit can power up to two laser safety sensors simultaneously. Each BEA sensor installation requires one appropriate power supply for proper operation.

REMOTE CONTROL - Universal remote control for BEA sensors.

Product Overview Universal remote control for the adjustments of our sensors.  

BEA LZR HOUSING BRACKET - Bracket accessory

Product Overview Bracket Accessory for LZR range. Housing bracket.  

BEA LZR-BA - Bracket accessory

Product Overview Bracket Accessory for LZR range.

BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

KING GATES Digy Pad

Digy Pad Back-lighted keypad Rolling code 433.92 MHz Digy Pad is KING gates's new numeric radio keyboard, that allows you to control up to 3 automations with its safe rolling code technology. Perfect combination of aesthetic design and robustness: the metal protective structure ensures maximum anti-vandal protection and easy installation. Digy Pad is programmed as simply as a remote control. It offers maximum security through its unique master code that can be modified or canceled only by the installer. DIGY PAD guarantees high operating autonomy thanks to its sensor that activates the keyboard back-light only in low brightness. 3 Vdc Power input 10 mA Dimensions 73x38x12 mm (estimated life: 2 years with an average of 10 transmissions per day in normal atmospheric conditions)  Digy Pad  Model  Code  Description  DIGYPAD  10S062  Wall radio transmitter 3 channels 433.92 MHz Technial Data  Model  Frequency  Range  Coding  Power supply  Battery  Dimensions  Protection Level DIGYPAD 433,92 MHz 100 m outside 20 m inside Rolling code  3V 1 x CR2032 77x100x36 IP 54

BENINCA SC.RF - (Rx) Wireless safety edge receiver 868Mhz

Product Overview Radio wave frequency system - 868mhz Battery powered Suitable for resistive 8.2 Kohm or mechanical N/O edges Visually discreet installation as IP55 transmitter is in a smart cover Small receiver, fits most applications One SC.RF Receiver will receive signals from 8 x Separate RF transmitters. (2 x Relays)

BENINCA RF - (Tx) Wireless safety edge transmitter 868Mhz

Product Overview Transmitter for wireless safety edge (868 MHz)

NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

BENINCA IRI.KPAD.C Wired Digital Keypad

BENINCA IRI.KPAD.C WIRED DIGITAL KEYPAD Wired Keypad Product Details: IRI.KPAD.C – 12/24V Wired digital keypad Wired 12/24 Vac/dc vandal-proof digital keypad With alert buzzer and backlit buttons 30 storable PINs in stand-alone mode, 254 storable PINs with the BE.REC accessory Green (OK) and Red (KO) LED indicator lights

BFT TIMER DST - Digital Two-Channel Timer

Product Overview A digital timer with 24-hour, seven-day programming capability, featuring two channels and Daylight Saving Time (DST) functionality. Specifications Programming 24-hour, seven-day Channels Two-channel operation Features DST (Daylight Saving Time) enabled Type Digital  

BFT Q.BO WIRELESS TOUCH KEYPAD | 433MHz

Product Overview A wireless digital keypad featuring 0-9 numeric buttons with 433MHz rolling code technology. Compatible with BFT products, this keypad offers quick installation and comprehensive access management capabilities. Technical Specifications Frequency 433MHz Security Rolling code operation Keypad Type 0-9 numeric buttons User Capacity Up to 100 users Application Management Up to 10 applications Key Features Quick and easy installation Minimum downtime for setup Compatible with BFT product range Wireless operation Multi-user management Multiple application support

BFT Q.BO KEY WM - Hardwired Key Switch with Double Contact

Product Overview Hardwired key selector switch with double contact, designed for outdoor installation. Features non-latching operation.  

BFT PUSH TO EXIT - Stainless Steel Push to Exit Button

Product Overview Hardwired push to exit button in stainless steel finish, complete with surface mounting housing.  

BFT PUSH BUTTON 3 WAY - Three-Way Push Button Control

Product Overview Three-way control push button featuring raise, stop, and lower functions.  

BFT PUSH BUTTON 1 WAY - Exterior Push Button with IP56 Enclosure

Product Overview Push button with IP56 rated enclosure for exterior installation.  

BFT KEY SWITCH 2 - 2 position latching key switch

Product Overview High quality key switch featuring two position latching functionality.  

BFT BESAFE RX - SEAV Controller for reader

Product Overview Control unit designed for use with SEAV proximity reader systems.  

BFT BESAFE READER - SEAV Proximity reader

Product Overview Proximity reader for SEAV access control systems, compatible with SEAV proximity cards and fobs. Compatibility Compatible With SEAV Proximity Cards SEAV Proxy Fobs  

BFT BESAFE KEY FOB - SEAV Proxy Fob

Product Overview Proximity fob for SEAV access control systems.  

BFT BESAFE CARD - SEAV Proximity Card

Product Overview Proximity card for SEAV access control systems.  

BFT PCELL POST PHP ADA CC - Post Adapter for Desme and Thea Photocells

Product Overview Pair of adapters designed to mount Desme and Thea photocells onto older style CC photocell posts.

BFT PCELL POST PHP ADA - Post Adapter for AKTA and ERIS Photocells

Product Overview Adapters designed to mount Akta and Eris photocells onto PHP photocell posts.

BFT PCELL POST PHP BA1 - Barrier Photocell Mount for Giotto & Michelangelo

Product Overview Support bracket designed for mounting Desme or Thea photocells to Giotto and Michelangelo barrier systems.  

PCELL POST PHP - PHP Posts for BFT Photocells (Single Height)

Product Overview Photocell posts compatible with Thea, Desme and Compacta photocells. Akta and Eris photocells can be installed using the PCELL-POST-PHP-ADA adapter.  

PCELL POST PHP 2 - PHP Posts for BFT Photocells (Dual Height)

Product Overview Photocell posts designed for mounting Thea, Desme and Compacta photocells. Compatible with Akta and Eris photocells when used with the PCELL-POST-PHP-ADA adapter.  

BFT PCELL MURA ADA PHP - Post Mounting Accessory for MURA

Product Overview The ADA PHP MURA is an accessory that enables the installation of MURA photocells on PHP posts.  

BFT PCELL CCI - Flush Holder for MURA Photocells

Product Overview Recessed container CCI Mura, designed for wall or concrete pillar installation of MURA photocells.  

BFT PT 130 COVER - FL130B Protective covers

Product Overview Pair of protective covers for the FL130B photocells.  

BFT ACV20 - Protective Covers for Desme Photocells

Product Overview Protective covers designed specifically for Desme photocells.  

BFT SEAV 2241 -Pair of 180° Wireless Photocells

Product Overview The SEAV 2241 wireless photocells offer flexible installation with their wireless design and compact dimensions of 94mm x 45mm x 41mm. These photocells feature an adjustable lens providing 180° horizontal coverage and operate effectively up to a maximum range of 20m. Technical Specifications Dimensions 94mm x 45mm x 41mm Range 20m Adjustment 180° horizontal coverage Type Wireless Key Features Wireless operation 180° horizontal adjustment 20m maximum operating range Compact dimensions Adjustable lens system Easy wireless installation

BFT Thea - Pair of Hardwired Photocells with built-in flashing light

Product Overview The THEA is a patented BFT solution combining an adjustable photocell with an integrated flashing light. This innovative design features a lens that can be adjusted both horizontally and vertically, with IR signal synchronization to prevent blinding. Designed for external applications, it offers comprehensive coverage with its adjustable beam direction. Technical Specifications Voltage 24V ac/dc Absorbed Power Transmitter: 27mA Receiver: 17mA stand-by Receiver: 38mA max Protection Rating IP55 Temperature Range -20°C / +55°C Range 30m Adjustment 40° horizontally and 30° vertically U-Link Compatible No Key Features Integrated flashing light Adjustable lens system 40° horizontal adjustment 30° vertical adjustment 30m operating range Synchronized IR signal IP55 protection for external use Patented BFT design

BFT MURA - Pair of Photocells

Product Overview MURA is a recessed photocell designed for installations requiring minimal protrusion from walls or pillars. With its versatile power supply options and adjustable optics, it's compatible with all BFT control boards featuring verified safety management. The system maintains backwards compatibility with CELLULA 50 and FOTO-I photocells, offering a 30-metre operating range. Technical Specifications Supply Voltage 12 - 33Vac15 - 35Vdc Current Demand Transmitter: 20mA Receiver: 30mA Protection Rating IP44 Temperature Range -20 / +55°C Range 30m Key Features Recessed design for minimal protrusion Adjustable optics with three-screw alignment system 30m operating range Wide voltage supply compatibility Compatible with all BFT control boards Backwards compatible with CELLULA 50 and FOTO-I Verified safety management

BFT FL130B - Pair of Hardwired Photocells

Product Overview The FL130B hardwired photocells are compact safety devices measuring 115mm x 32mm x 26mm. This pair of photocells offers reliable operation with a maximum range of 30m, making them suitable for various gate automation installations. Technical Specifications Power Supply 20 to 31Vac / 22–30Vdc Absorption (per pair) 70mA Range 30m Relay Contacts 1A at 24Vac-dc Temperature Range –15°C to +70°C Protection Rating IP54 Key Features Compact dimensions: 115mm x 32mm x 26mm 30m maximum operating range Hardwired connection IP54 protection rating Wide operating temperature range Versatile power supply options

BFT Desme - Hardwired Photocells (30m range)

Product Overview The Desme photocells are hardwired photocells measuring 105mm x 43mm x 37mm. It has an adjustable lens offering 20° horizontal movement and 5° vertical movement. The Desme has a 30m maximum range. Technical Specifications Current Demand Transmitter: 10mA Receiver: standby 10mA / max 18mA Contact Capacity 30V, 1A Protection Rating IP55 Temperature Range -20 / +55°C Range 30m Adjustment 20° horizontal and 5° vertical Key Features Compact dimensions: 105mm x 43mm x 37mm 20° horizontal adjustment 5° vertical adjustment 30m maximum operating range Enhanced IP55 protection rating Hardwired connection Adjustable lens system

CAME ZL39B board 24 v Control Panel PCB Only

ZL39B board 24 v Control Panel    (Stripped back version for use with older barriers) This item replaces the CAME ZL38. Terminal Block and Transformer are required CAME ZL39B  Control Panel for CAME GARD barriers.   Whats Included: 1 ZL39B 88003-0124      

CAME ZLX24SA Conversion Kit for ZLJ24 And ZL19

Product Overview CAME ZLX24SA Conversion Kit 88006-0085  

CAME ZLX ENCLOSURE

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

CAME ZLX24SA | Control Panel | CNX BUS, Adaptive Speed, 1000 Users

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

BFT MITTO COOL 4 - Four button transmitter

MITTO COOL 4 TRANSMITTER - Four buttons Mitto Cool transmitter available in 2 and 4 button versions. The next generation of transmitters specifically designed for BFT products offering new features and improved design. The new design features larger and spaced buttons, improved mechanical feedback, and a more ergonomic grip for comfortable use. The range's radio protocol offers full compatibility with all BFT receivers and encrypted rolling code transmission to prevent cloning. The range also offers easy programming via a QR-Code and Easy AXS app.  Advanced Security: Mitto range offers encrypted rolling code transmission to prevent cloning and increase security during data transmission Built-in replay function: available on all standard models so there are fewer codes to control; you will be able to clone a BFT remote control easily and quickly.  Improved Design: The range has a modern, ergonomic design that makes it comfortable to use, and the larger and spaced buttons provide more accurate mechanical feedback. Customisation Options: The range offers alternative colors, personalisation options, and the ability to control more than one automation with specific buttons.  Multichannel Functionality: The remote controls, with four buttons in the range, can manage up to eight channels, enabling users to control multiple automations with specific combinations of buttons.

BFT MITTO COOL 2 - Two button transmitter

MITTO COOL 2 TRANSMITTER - Two buttons Mitto Cool transmitter available in 2 and 4 button versions. The next generation of transmitters specifically designed for BFT products offering new features and improved design. The new design features larger and spaced buttons, improved mechanical feedback, and a more ergonomic grip for comfortable use. The range's radio protocol offers full compatibility with all BFT receivers and encrypted rolling code transmission to prevent cloning. The range also offers easy programming via a QR-Code and Easy AXS app.  Advanced Security: Mitto range offers encrypted rolling code transmission to prevent cloning and increase security during data transmission Built-in replay function: available on all standard models so there are fewer codes to control; you will be able to clone a BFT remote control easily and quickly.  Improved Design: The range has a modern, ergonomic design that makes it comfortable to use, and the larger and spaced buttons provide more accurate mechanical feedback. Customisation Options: The range offers alternative colors, personalisation options, and the ability to control more than one automation with specific buttons.  Multichannel Functionality: The remote controls, with four buttons in the range, can manage up to eight channels, enabling users to control multiple automations with specific combinations of buttons.

Forematic A-R22 Vehicle Tag Reader System With Two USB Tags

Forematic A-R22 Vehicle Tag Reader System With Two USB Tags This vehicle ID receiver will open a gate or door for vehicles carrying a valid long-range radio frequency ID tag. The receiver can be connected to and powered from all known control panels. The set is supplied with two pre-programmed ID tags. The receiver controls the gate through two relays, one for opening and another for closing. Gates and barriers with auto-close functionality enabled will only use the OPEN relay output. A blue LED indicates when a vehicle ID tag is within range. Mount the receiver in a plastic waterproof housing at least 1.5m above ground for optimal RF reception. There is no sensitivity adjustment or any other serviceable parts inside the receiver. Specifications 12-24V AC/DC Iq=20mA Form A relay 1A @ 12V 44 x 50 x 24mm

Videx 701T/24 BST/GMT Digital Time Clock 24V AC or DC

Product Overview The Videx 701T/24 BST/GMT digital time clock is a versatile and reliable solution for various timing needs. It features automatic BST/GMT correction, six fully programmable on/off times, a trade button input, and a 3A relay output. The time clock operates from either 24V AC or DC and is housed in a durable white ABS plastic box. The device also includes a three-month rechargeable onboard battery backup to maintain the correct time and all-time bands during mains failure. Key Features 24V AC or DC operation Dry contact 3A rated relay output (CO, NO & NC) Six fully-programmable on/off times Automatic British summertime correction (BST/GMT) Trade button input with adjustable relay time from 1 to 99 seconds Easy-to-read 2 lines 16 characters backlit LCD display Three-month rechargeable onboard battery backup Mounted in a white ABS plastic box Product Information Operating Voltage 24V AC or DC Relay Output Dry contact 3A rated (CO, NO & NC) Programmable Times Six on/off times Dimensions 110 x 70 x 30 mm Battery Backup Three-month rechargeable onboard battery Display 2 lines 16 characters backlit LCD Housing Material White ABS plastic

CAME TOP44RBN - 806TS-0270 Rolling Code 433MHZ Transmitter

CAME TOP44RBN - 806TS-0270 Four Channel 433mhz Rolling Code Transmitter Four Channel Four Button Rolling Code Transmitter. Black Colour. Manages Several Operators. More Secure Thanks to the Dynamic Code. Uses Only One CR2032 Battery. Flat Battery Alert.

CDVI GALEO BLACK | Bluetooth Backlit Keypad with Remote Electronics, Black Matte

Product Overview The GALEO BLACK is an innovative surface mount keypad combining sleek and stylish aesthetics with a black matte coat and robust security. With a remote electronic controller and vandal-resistant body, this keypad minimizes the risk of the system being disabled through tampering. GALEO BLACK is Bluetooth-enabled, and its free iOS or Android app makes programming easier than ever. With a simple and intuitive interface, you can quickly set up all the key parameters directly from your smartphone. Key Features Surface mount keypad combining style with robust security Stylish black matte finish Electronics supplied in separate remote housing for added security Bluetooth-enabled - configure parameters from your smartphone User app available - open the door from your phone & share temporary codes with visitors Vandal-resistant screws and IP64/IK10 rating for installation in harsh environments Product Specifications Material Zamak® cast alloy Mounting Surface mount Technology Bluetooth User limit 100 Electronics Remote Relays 3, pulse, timed or latched Contacts C, NO, NC Code length Min. 4, max. 5 digits Weight 0.54 kg

Akuvox A03 - IP Access Control Reader, BLE, 13.56MHz and NFC

Akuvox A03 - IP Access Control Reader, BLE, 13.56MHz and NFC The Akuvox A03 Access Control Reader provides contactless access authentication via a choice of Bluetooth 5.0 (BLE), RFID and NFC - providing a flexible and secure door / gate access solution. Part of the new Akuvox A0 Access Control Series, the A03 combines compact, modern design with simplicity and reliable performance. The BLE and NFC authentication allows touch-free, keyless access via smartphone. The A03 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Access authentication via BLE, RFID & NFC Web interface administration Keyless entry via smartphone (BLE, NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm Wave hand to unlock when using the Akuvox My MobileKey app with BLE 5.0 technology IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS DescriptionA03 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods BLE, RFID, NFC RFID Supported Frequencies 13.56MHz & 125kHz Bluetooth Version Bluetooth 5.0 Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg  

Akuvox A02 - IP Access Control Reader, Keypad, RFID 13.56MHz, 125Khz and NFC

Akuvox A02 - IP Access Control Reader, Keypad, RFID 13.56MHz, 125Khz and NFC The Akuvox A02 Access Control Reader provides dual access authentication via Keypad, RFID and NFC - providing a flexible and secure door / gate access solution. Part of the new Akuvox A0 Access Control Series, the A02 combines compact, modern design with simplicity and reliable performance. The dual option authentication allows touch-free access via RFID cards & keyfobs or keyless access via smartphone NFC. The A02 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Dual format access authentication via multi-frequency RFID, NFC & keypad Web interface administration Remote configuration and management Keyless entry via smartphone (NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS   DescriptionA02 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods Keypad, RFID, NFC Dual Authentication Available as a combination of any two authentication methods RFID Supported Frequencies 13.56MHz, 125KHz Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg

Akuvox A01 - IP Access Control Reader, RFID 13.56MHz, 125Khz and NFC

Akuvox A01 - IP Access Control Reader, RFID 13.56MHz, 125Khz and NFC The Akuvox A01 Access Control Reader provides dual access authentication via RFID and NFC - providing a completely contactless door / gate access solution.   Part of the new Akuvox A0 Access Control Series, the A01 combines compact, modern design with simplicity and reliable performance.   The dual option authentication ensures touch-free access via RFID cards & keyfobs or keyless access via smartphone NFC.   The A01 Access Reader is simple to order (out-of-the-box ready; no additional frames or backboxes required) and is fast & easy to install. Can be Flush- or Surface-mounted. Includes surface-mount back plate.   FEATURES IP Access Control Reader Dual format access authentication via multi-frequency RFID and NFC Web interface administration Remote configuration and management Keyless entry via smartphone (NFC) 20,000 card capacity and 100,000 event log Tamper-proof alarm Toughened glass front panel IP65 protection rating for indoor & outdoor applications Flush- or Surface-mountable TECHNICAL SPECIFICATIONS DescriptionA01 Power Supply PoE or 12V DC Recommended Cabling Cat5e or better Authentication Methods RFID, NFC Dual Authentication Available as a combination of RFID & NFC RFID Supported Frequencies 13.56MHz, 125KHz Installation format Flush- or Surface-mounted Housing Material Aluminium Alloy & Toughened Glass Surface Relay Port x1 Input Port x2 User ID Capacity Card Capacity - 20,000 IP Protection Rating IP65 Dimensions 86(W) x 86(H) x 33(D)mm Weight (Net) 0.30kg Weight (Gross) 0.40kg

GIBIDI BA24 Control Panel | AS06300 | For GROUND624, ART5024, AUTOBOX3024

Product Overview BA24 - Control Panel (AS06300) is a versatile control unit compatible with GROUND624, ART5024, and AUTOBOX3024. Key Features Supports 1 or 2 engines on 24 Vdc (max. 150W) Compatible with GROUND, ART, and AUTOBOX swing gates Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc (max. 150W) Power supply 220-230 Vac Swing gates GROUND, ART Sliding gates YES Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA100 Control Panel | AS05060 | For Various Gate and Door Operators

Product Overview BA100 - Control Panel (AS05060) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, GROUND610, BL233, ART5000, MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 engine on 230 Vac (max. 700W), 2 engines in parallel only Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 on 230 Vac (max. 700W), 2 engines in parallel only Power supply 220-230 VAC Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian NO Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (2) Type of programming Analog Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA230 Control Panel | AS05581 | For Various Gate and Door Operators

Product Overview BA230 - Control Panel (AS05581) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, TOUCHE126, TOUCHE276, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BE24 Control Panel | AS06250 | For KUDA, AGO424E, AGO624E, SNAPPER, SERRA320

Product Overview BE24 - Control Panel (AS06250) is a versatile control unit with an embedded radio receiver compatible with KUDA, AGO424E, AGO624E, SNAPPER, and SERRA320 swing gates. Key Features Supports 1 or 2 engines on 24 Vdc Compatible with KUDA, AGO, SNAPPER, and SERRA swing gates Force adjustment and slowdown features Safety device and photocell input Encoder or time logic limit switches Electric lock compatibility Embedded radio receiver IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc Power supply 220-230 Vac Swing gates KUDA, AGO, SERRA, SNAPPER Sliding gates NO Overhead or sectional doors NO Barriers NO Bollards NO Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Encoder or time logic Type of programming Analog with leaf-learning Electric-lock YES Embedded radio receiver YES Protection degree IP 55

GIBIDI F4 Control Panel | AS06320 | For Various Gate and Door Operators

Product Overview F4 - Control Panel (AS06320) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES

LOCINOX 3006J-H - Aluminium handle pair with 120 mm follower

3006J-H - Aluminium handle pair with 120 mm follower Handle pair in aluminium with square 120 mm spindle for insert locks. Special design avoids bumping of the hand against the stop plate Square 8 mm follower DRAWING

LOCINOX 3006B-H - Black anodized aluminium handle pair for insert locks

3006B-H - Black anodized aluminium handle pair for insert locks Black anodized aluminium handle pair with 120 mm long spindle for insert locks Square 8 mm follower DRAWING

LOCINOX 3006I - Stainless steel handle pair with 90 mm follower

3006I - Stainless steel handle pair with 90 mm follower Stainless steel handle pair. Handle pair made of stainless steel Square 8 mm follower DRAWING

LOCINOX EGS | Economic Ground Stop for Drop Bolts | Ø20 mm Axle, Hot-Dip Galvanized

Product Overview The EGS Economic Ground Stop is a simple and cost-effective solution for securing drop bolts with a maximum axle diameter of Ø20 mm. Designed to be embedded in concrete, this ground stop features a hot-dip galvanized base-plate and a polypropylene catcher. The inclusion of a draining hole ensures efficient water drainage, preventing accumulation and potential damage. This economic ground stop is ideal for those seeking a durable and reliable option without the need for a stop plate. Key Features Simple and economic ground stop for drop bolts Designed for drop bolts with a maximum axle diameter of Ø20 mm Hot-dip galvanized base-plate for durability Polypropylene catcher for reliable performance Includes draining hole to prevent water accumulation Designed to be embedded in concrete Product Description Specifications Axle Diameter: Up to Ø20 mm Base-Plate Material: Hot-dip galvanized Catcher Material: Polypropylene Installation: To be embedded in concrete Additional Features: Includes draining hole The EGS Economic Ground Stop is a practical and affordable choice for securing drop bolts in various gate installations. Its hot-dip galvanized base-plate ensures long-lasting durability and resistance to corrosion, while the polypropylene catcher provides a secure and reliable hold for the drop bolt. Designed to be embedded in concrete, this ground stop is easy to install and provides a stable and secure stopping point for drop bolts with an axle diameter of up to Ø20 mm. The inclusion of a draining hole helps to prevent water accumulation, reducing the risk of damage and ensuring the longevity of the ground stop. This ground stop is a perfect choice for those looking for a simple and economic solution without compromising on quality and durability. Its straightforward design and robust materials make it a reliable option for a wide range of applications. NOTE: Images may differ from the actual product.

Locinox DINO | 180° Double Bearing Hinge | Aluminium Housing, Stainless Steel Bearings

Product Overview The Locinox DINO is a robust 180° double bearing hinge designed for gates. Featuring an aluminium housing and stainless steel bearings, this hinge ensures a smooth and reliable opening and closing mechanism. The DINO hinge is easy to install with the innovative Quick-Fix system, providing a secure and vandal-proof fixing. Its aesthetic design makes it an ideal choice for both functional and stylish gate installations. Key Features 180° opening angle Contains 2 stainless steel bearings for smooth operation Anti-theft and vandal-proof fixing Compatible with Mammoth-180 Supports gates up to 150 kg (maximum width of 1.5 m) Suitable for left & right turning gates Aesthetic design with powder-coated aluminium housing Fast and easy installation with Quick-Fix Sold per pair Product Description Specifications Opening Angle: 180° Bearings: 2 stainless steel bearings Fixing: Anti-theft and vandal-proof Compatibility: Can be combined with Mammoth-180 Gate Capacity: Up to 150 kg (max width 1.5 m) Turning Direction: Left & right turning gates Design: Aesthetic, powder-coated aluminium housing Installation: Quick-Fix system Packaging: Packed per pair The Locinox DINO hinge is designed for those who need a reliable and durable solution for their gates. The hinge features a 180° opening angle, making it versatile for various gate applications. The inclusion of two stainless steel bearings ensures a smooth and seamless operation, reducing wear and tear on the gate and the hinge itself. The DINO hinge is built with security in mind. Its anti-theft and vandal-proof fixing system ensures that the hinge remains securely in place, providing peace of mind. The hinge is also compatible with the Mammoth-180, allowing for further customization and enhancement of your gate system. Constructed from powder-coated aluminium, the DINO hinge not only offers a sleek and modern aesthetic but also provides excellent durability and resistance to the elements. The Quick-Fix installation system makes the hinge easy to mount, saving time and effort during the setup process. This hinge is suitable for gates up to 150 kg in weight and with a maximum width of 1.5 m, making it a versatile choice for various gate types. Whether you need a hinge for a left or right turning gate, the DINO hinge meets the requirements with its robust design and flexible installation options. NOTE: Images may differ from the actual product.

Locinox SFKM | Stainless Steel Surface Mounted Keep for Fortylock, Fiftylock, and Sixtylock | Square Profiles

Product Overview The Locinox SFKM is a stainless steel surface mounted keep designed for use with Fortylock, Fiftylock, and Sixtylock insert locks, specifically for square gate profiles. This aesthetically pleasing keep is ideal for small metal, aluminium, and PVC gates. Its limited 8 mm depth ensures a discreet look while providing robust functionality. The innovative Quick-Fix system ensures a fast and strong fixation, making installation quick and easy. This unique keep, when combined with the insert lock, ensures a strong gate anchoring for enhanced security and durability. Key Features Stainless steel keep for square profiles as of 40 mm Compatible with Fortylock, Fiftylock, Sixtylock, and Eightylock Extruded aluminium stop plate with rubber strip for long-term use Includes innovative Quick-Fix fixations and self-drilling screws Easy left or right changing Elegant design with a visible thickness of 8 mm Adjustable stop plate for 40 mm to 60 mm gate frames Adjustable guide to prevent damage to the day bolt and post Product Description Specifications Material: Stainless steel Compatibility: Fortylock, Fiftylock, Sixtylock, and Eightylock Profile Type: Square profiles as of 40 mm Stop Plate: Extruded aluminium with rubber strip Installation: Quick-Fix system with self-drilling screws Design: Visible thickness of 8 mm, elegant and discreet Adjustability: Adjustable stop plate for 40 mm to 60 mm gate frames, adjustable guide for day bolt The Locinox SFKM surface mounted keep is designed to offer a secure and aesthetically pleasing solution for various types of gates. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, equipped with a rubber strip, enhances the keep's longevity and functionality by reducing wear and noise. Installation is straightforward with the innovative Quick-Fix system, which includes self-drilling screws for a strong and fast setup. The keep is easily adjustable, allowing it to fit gate frames ranging from 40 mm to 60 mm. Additionally, the adjustable guide prevents damage to the day bolt and post, ensuring smooth and reliable operation. The elegant design of the SFKM, with its visible thickness of only 8 mm, ensures that it blends seamlessly with the gate, providing a discreet yet effective locking solution. This keep is perfect for small metal, aluminium, and PVC gates, and its compatibility with various insert locks makes it a versatile choice for enhancing gate security. NOTE: Images may differ from the actual product.

LOCINOX SPKZ QF - Insert keep for square profiles of 40 mm

Locinox SPKZ QF - Insert keep for square profiles of 40 mm Flat keep with polyamide box to integrate into the post. This set allows you to adjust your (ornamental) gates with a minimal gap. SPECIFICATIONS Insert keep for square profiles of 40 mm Innovative Quick-Fix mounting NOTE: Images may differ from actual products

Locinox SAKL QF | Adjustable Stainless Steel Keep | Square or Round Profiles

Product Overview The Locinox SAKL QF is an adjustable stainless steel keep designed for use with square or round gate profiles. This robust keep is suitable for a wide range of gate types, including garden, ornamental, and industrial gates. Featuring a unique Quick-Fix system, the SAKL QF ensures a fast and strong mounting. The adjustable aluminium stop plate with a rubber strip accommodates gate profiles from 40 to 60 mm in width, providing a secure and reliable fit. The design has been refined to make the strike accept the latchbolt more easily, enhancing its functionality. Key Features Stainless steel bolt receiver for durability Extruded aluminium stop plate with rubber strip Easy left or right changing Innovative Quick-Fix mounting for fast installation Adjustable for gate profiles from 40 to 60 mm width Suitable for both rectangular and round profiles Product Description Specifications Material: Stainless steel bolt receiver, aluminium stop plate Mounting: Quick-Fix system Adjustability: Fits gate profiles from 40 to 60 mm width Profile Compatibility: Suitable for rectangular and round profiles Stop Plate: Aluminium with rubber strip The Locinox SAKL QF adjustable keep is designed to provide a secure and reliable solution for a variety of gate types. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, combined with a rubber strip, enhances the keep's ability to securely hold the gate in place while minimizing noise and wear. The innovative Quick-Fix system simplifies the installation process, allowing for a fast and strong mounting without the need for extensive tools or expertise. The SAKL QF is adjustable to fit gate profiles from 40 to 60 mm in width, providing versatility and compatibility with a wide range of gate designs. Additionally, the keep is designed for easy left or right changing, further enhancing its adaptability. This keep is ideal for garden, ornamental, and industrial gates, offering a reliable and aesthetically pleasing solution. The refined design ensures that the strike accepts the latchbolt easily, providing a smooth and secure locking mechanism. NOTE: Images may differ from the actual product.

Locinox 3020-HYB | Cover Shields for Insert Locks | Aluminium, Stainless Steel, Polyamide

Product Overview The Locinox 3020-HYB Cover Shields are designed to provide an aesthetic finish for the handle and cylinder holes of Locinox insert locks. These cover shields are available in three materials: aluminium, stainless steel, and polyamide, allowing you to choose the one that best suits your gate's style and durability requirements. The cover shields come with screws included for easy installation. Key Features Cover shield for handle and cylinder holes Compatible with HWLB for Hybrid locks Available in polyamide, aluminium, and stainless steel Screws included for easy installation Provides an aesthetic finish for insert locks Product Description Specifications Material Options: Polyamide, Aluminium, Stainless Steel Compatibility: Standardised gate pattern, compatible with HWLB for Hybrid locks Includes: Screws for installation The Locinox 3020-HYB Cover Shields are perfect for those looking to enhance the appearance and functionality of their gate locks. These cover shields are designed to fit the handle and cylinder holes of Locinox insert locks, providing a neat and professional finish. The shields are compatible with HWLB for Hybrid locks, ensuring a seamless fit with your existing gate hardware. Available in durable materials such as polyamide, aluminium, and stainless steel, these cover shields offer both aesthetic appeal and robust protection. Whether you prefer the lightweight and corrosion-resistant properties of aluminium, the strength and durability of stainless steel, or the versatile and cost-effective polyamide, the Locinox 3020-HYB has you covered. Installation is straightforward with the included screws, making it easy to upgrade your gate's appearance and functionality. The standardised gate pattern ensures compatibility with a wide range of gate designs, making the Locinox 3020-HYB Cover Shields a versatile and practical choice for any gate. NOTE: Images may differ from the actual product.

Locinox ORNAMENTAL LOCK | Large Surface Mounted Gate Lock | Aluminium Housing, Stainless Steel Mechanism

Product Overview The Locinox ORNAMENTAL LOCK (LAKQ H2) is a high-quality, large surface mounted gate lock designed for ornamental gates. It features an aluminium housing and a robust stainless steel mechanism, ensuring durability and long-lasting performance. This lock is recommended as a standard for all ornamental gates due to its superior build and aesthetic appeal. The 20 mm continuous adjustability of the bolts ensures perfect alignment of the locking mechanism, while the solid stainless steel deadbolt with a 23 mm throw guarantees secure locking. The lock comes standard with a zamac ornamental handle pair for added elegance. Key Features Aluminium housing with stainless steel mechanism 20 mm continuous adjustability of the bolts for perfect alignment Solid stainless steel deadbolt with a 23 mm throw Standard supplied with zamac ornamental handle pair ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Easy left or right changing of the self-latching daybolt Key-operated self-latching bolt 4-hole fixing with two hexagon socket head screws 60 mm center distance of the bolts Product Description Specifications Housing Material: Aluminium Mechanism Material: Stainless Steel Adjustability: 20 mm continuous adjustment of the bolts Deadbolt Throw: 23 mm in 1 turn of the key Coating: ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Daybolt: Easy left or right changing of the self-latching daybolt Fixing: 4-hole fixing with two hexagon socket head screws Center Distance: 60 mm center distance of the bolts The Locinox ORNAMENTAL LOCK is specifically designed to provide a secure and aesthetically pleasing solution for ornamental gates. Its aluminium housing and stainless steel mechanism ensure durability and resistance to the elements, while the ISO 9227 KTL/E-coating provides superior protection against corrosion, allowing the lock to withstand up to 1000 hours of salt spray test. Installation is straightforward and precise, thanks to the continuous adjustability of the bolts and the easy left or right changing of the self-latching daybolt. The 23 mm deadbolt throw, achieved in a single turn of the key, ensures a secure lock every time. The lock is key-operated and comes standard with a zamac ornamental handle pair, adding a touch of elegance to your gate. The 4-hole fixing system, with two hexagon socket head screws, provides a robust and secure attachment, ensuring that the lock remains firmly in place. The 60 mm center distance of the bolts further enhances the lock's stability and security. For a fast and highly precise installation, we recommend using the Drill-Fix drilling caliber. This lock is an excellent choice for anyone looking to secure their ornamental gates with a reliable and aesthetically pleasing solution. NOTE: Images may differ from the actual product.

Locinox POWERSTONE | 24V-60W Switching Power Supply Unit | High Quality, Plug & Play

Product Overview The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is a high-quality power supply designed for efficient and reliable performance. This unit features a plug & play installation, ensuring a hassle-free setup. The integrated overload indicator adds an extra layer of protection, making it a robust solution for various applications. It can be mounted on a DIN-rail or directly, providing flexibility in installation. Key Features High-quality 60W switching-mode power supply Plug & play installation guaranteed Integrated overload indicator for added protection Mounting options: DIN-rail or direct mounting Auxiliary 24V DC output available Product Description Specifications Input: 110-240 VAC, 50-60Hz, 1.2A maximum Output: +24V DC, 2.5A maximum, 60W Mounting: DIN-rail or direct mounting Overload Indicator: Resettable Auxiliary Output: 24V DC available The Locinox POWERSTONE 24V-60W Switching Power Supply Unit is designed to deliver reliable and efficient power. With an input range of 110-240 VAC and a maximum output of +24V DC at 2.5A, this power supply unit is suitable for a wide range of applications. The integrated overload indicator helps to protect your devices by alerting you to potential overload situations. Installation is made easy with the plug & play design, ensuring a quick and hassle-free setup. The unit can be mounted on a DIN-rail or directly, providing flexibility based on your installation needs. Additionally, the auxiliary 24V DC output is available for powering additional devices, making it a versatile solution for your power needs. The robust construction and high-quality components of the Locinox POWERSTONE ensure long-lasting performance and reliability. Whether for industrial, commercial, or residential applications, this power supply unit is an excellent choice for powering your devices efficiently and safely. NOTE: Images may differ from the actual product.

AES IGATE DUAL EU - 4G GSM gate controller

AES IGATE-DUAL-EU - 4G GSM gate controller AES i-Gate Dual 4G GSM Gate Controller Product ID: IGATE-DUAL-EU The AES i-Gate Dual was introduced in 2026, combining the advanced features of both the IGATE1200 Plus and IGATE Prime into a single, powerful unit. Designed for gate, barrier, and door access control, this 4G GSM controller can store up to 1,280 authorised phone numbers. Registered users simply call the unit to activate the built-in relay, allowing secure, keyless access without answering the call. SPECIFICATIONS Power supply: 12-24V AC/DC IP rated: IP67 Standby current: 45mA Current when called: 200mA Relay load: 24V 2 amps max Relay type: N/C and N/O latching & momentary

CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

Product Overview The CAME ZA5 is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement is ideal for those looking to replace a damaged or malfunctioning ZA5 control panel. With a power supply of 230V and a protection rating of IP54, the ZA5 control panel ensures reliable and efficient operation of your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA5 control panel. Compatible with one or two CAME 230V operators. 230V power supply for robust performance. IP54 protection rating for durability and resistance to environmental factors. Product Description CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA5 control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA5 control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA5 control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. Whether you are replacing a damaged control panel or upgrading your gate automation system, the CAME ZA5 control panel (PCB only) is a dependable choice. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators Note: Images may differ from the actual product. The CAME ZA5 control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

LIMITED STOCK AVAILABLE   Product Overview The CAME ZA3P is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement features limit-switch control and slow-down speed adjustment, ensuring smooth and precise gate operation. With a power supply of 230V and a protection rating of IP54, the ZA3P control panel provides reliable and efficient performance for your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA3P control panel. 230V power supply for robust performance. Limit-switch control for precise gate operation. Slow-down speed adjustment for smooth movements. IP54 protection rating for durability and resistance to environmental factors. Compatible with one or two CAME 230V operators. Product Description CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA3P control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA3P control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA3P control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. The limit-switch control and slow-down speed adjustment features ensure precise and smooth gate movements, enhancing the overall performance and safety of your gate system. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators The CAME ZA3P control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZL65 | Control Panel for Two-Leaf Swing Gates | LCD Display, IP54

Product Overview The CAME ZL65 Control Panel is a multifunctional solution designed for two-leaf swing gates. This advanced control panel features an LCD display for easy function programming, signaling, and self-diagnosis of safety devices. The ZL65 has been completely overhauled to ensure higher quality and easier settings. With its memory roll feature, you can save and copy settings to other operators, streamlining the setup process. The control panel includes color-coded terminals for straightforward wiring and installation. Key Features Designed for two-leaf swing gates LCD display for function programming, signaling, and self-diagnosis Memory roll for saving and copying settings to other operators Color-coded terminals for easy wiring and installation Compatible with a range of CAME transmitters Includes dedicated Green Power module and CONNECT GW gateway Allows connection to GSM, WiFi, or LAN networks for remote management via CAME CONNECT Protection rating of IP54 Product Description Specifications Motor Voltage: 24v Protection Rating: IP54 The CAME ZL65 Control Panel is designed to offer comprehensive control and management for two-leaf swing gates. The multifunctional control panel is equipped with an LCD display that facilitates easy programming of functions, signaling, and performing self-diagnosis on safety devices. This control panel has been overhauled to improve quality and simplify the settings process. One of the standout features of the ZL65 is the memory roll, which allows users to save and copy settings to other operators, making it an efficient tool for managing multiple gates. The color-coded terminals further enhance the ease of installation, ensuring a hassle-free setup process. The ZL65 control panel is compatible with a variety of CAME transmitters and includes the dedicated Green Power module and CONNECT GW gateway. This gateway module kit enables the operator to connect to GSM, WiFi, or LAN networks, allowing for remote management through CAME CONNECT. This feature is particularly useful for operators who need to manage gate settings and operations remotely. The control panel is housed in an enclosure with an IP54 protection rating, ensuring durability and resistance to environmental factors such as dust and water. This makes the CAME ZL65 a reliable and robust solution for controlling two-leaf swing gates in various settings. NOTE: Images may differ from the actual product.

CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL60 is a versatile control panel designed for one or two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features functions set by dip-switches and adjusted by trimmers, ensuring precise and customizable control. It is set up for connecting the RGP1 module to reduce energy consumption and the RLB card for emergency operation and battery recharging. All connections and links are rapid-fuse protected for added safety and reliability. Key Features Control panel for one or two-leaf swing gates. Includes enclosure and lid for complete protection. Functions set by dip-switches and adjusted by trimmers. Compatible with RGP1 module for reducing energy consumption. Supports RLB card for emergency operation and battery recharging. Rapid-fuse protected connections and links. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with AXL and FTL motor ranges. Product Description CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid The CAME ZL60 control panel is designed to provide reliable and efficient automation for one or two-leaf swing gates. With functions set by dip-switches and adjusted by trimmers, this control panel allows for precise customization to meet your specific needs. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is set up for connecting the RGP1 module, which helps reduce energy consumption, and the RLB card, which provides emergency operation and battery recharging capabilities. The rapid-fuse protected connections and links add an extra layer of safety, ensuring reliable operation. Compatible with the AXL and FTL motor ranges, the CAME ZL60 control panel is a versatile and dependable choice for your gate automation system. Technical Specifications SpecificationDetails Motor Voltage 24V Protection Rating IP54 Motor Range AXL, FTL The CAME ZL60 control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for one or two-leaf swing gates.

CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL92Z is a multifunction control panel designed for two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features an LCD display for function programming, signalling, and self-diagnosis of safety devices, ensuring precise and user-friendly control. With a power supply of 24V and a protection rating of IP54, the ZL92Z control panel ensures reliable and efficient operation of your gate system. Key Features Multifunction control panel for two-leaf swing gates. Includes enclosure and lid for complete protection. LCD display for function programming, signalling, and self-diagnosis of safety devices. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with Amico and Stylo motor ranges. Product Description CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid The CAME ZL92Z control panel is designed to provide reliable and efficient automation for two-leaf swing gates. With an LCD display for function programming, signalling, and self-diagnosis of safety devices, this control panel allows for precise customization and user-friendly control. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is compatible with the Amico and Stylo motor ranges, making it a versatile and dependable choice for your gate automation system. With a 24V motor voltage and an IP54 protection rating, the CAME ZL92Z control panel is built to withstand various environmental conditions while delivering consistent performance. Technical Specifications SpecificationDetails Power Supply 24V Motor Voltage 24V Protection Rating IP54 Compatibility For use with one or two CAME 24V operators with self-diagnosis Motor Range Amico, Stylo The CAME ZL92Z control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

LOCINOX TURNITEC TT-FC2 | Fail Close Electromodule | Access Control, Easy Installation

Product Overview The TURNITEC TT-FC2 Fail Close Electromodule is a versatile and reliable solution for controlling incoming and outgoing traffic through turnstiles. This electromechanical module allows operators to manage access control easily, including granting or denying access, changing the rotational direction, and executing precise access control measures. The module is designed to fail close, ensuring the turnstile remains locked during power loss, and is easy to install in a TURNITEC base module or as an expansion on an existing system. Key Features Fail Close electromodule (power loss = locked turnstile) Easy to install in a TURNITEC base module or as an expansion Interchangeable with the mechanical module Suitable for left or right turning turnstiles Locking by powerful electromagnets Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display 100% secure: reset function after 1 full rotation Fitted with a 24V DC power supply for exterior use with integrated timer Encapsulated control module for superior humidity resistance Input voltage: 220V AC Maximum output power: 25W Expandable with TT-COUNTER-LIGHT module for counter and/or signalization Connection by Plug&Play connector Aluminium powder-coated housing with heat dissipation fins Manual release by key always possible Anti-passback security: 60° locking mechanism High quality and guaranteed performance (tested on 1 million movements) Product Description The TURNITEC TT-FC2 Electromodule is designed to enhance access control for turnstiles, providing operators with the ability to control incoming and outgoing traffic effectively. This fail close module ensures that in the event of power loss, the turnstile remains locked, maintaining security. Installation is straightforward, whether in a new TURNITEC base module or as an expansion on an existing system. The module features powerful electromagnets for secure locking and is suitable for both left and right turning turnstiles. Operators can easily control the time range of the switched state via push buttons, with the set time clearly visible on the display. The module is equipped with a 24V DC power supply designed for exterior use, ensuring durability and reliability in various environments. The encapsulated control module provides superior resistance to humidity, enhancing its longevity and performance. For added security, the TT-FC2 includes a reset function that activates after one full rotation of the turnstile, preventing unauthorized access. The aluminium powder-coated housing with heat dissipation fins ensures the module remains cool during operation. The module is also expandable with the TT-COUNTER-LIGHT module for additional functionality, such as counters and signalization. Manual release by key and anti-passback security features further enhance the reliability and safety of this electromechanical module. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-FO2 | Fail Open Electromodule | Access Control, Easy Installation

Product Overview The TURNITEC TT-FO2 Fail Open Electromodule is a versatile and reliable solution for controlling incoming and outgoing traffic through turnstiles. This electromechanical module allows operators to manage access control easily, including granting or denying access, changing the rotational direction, and executing precise access control measures. The module is designed to fail open, ensuring free rotation during power loss, and is easy to install in a TURNITEC base module or as an expansion on an existing system. Key Features Fail Open electromodule (power loss = free rotation) Easy to install in a TURNITEC base module or as an expansion Interchangeable with the mechanical module Suitable for left or right turning turnstiles Locking by powerful electromagnets Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display 100% secure: reset function after 1 full rotation Fitted with a 24V DC power supply for exterior use with integrated timer Encapsulated control module for superior humidity resistance Input voltage: 220V AC Maximum output power: 25W Expandable with TT-COUNTER-LIGHT module for counter and/or signalization Connection by Plug&Play connector Aluminium powder-coated housing with heat dissipation fins Manual release by key always possible Anti-passback security: 60° locking mechanism High quality and guaranteed performance (tested on 1 million movements) Product Description The TURNITEC TT-FO2 Electromodule is designed to enhance access control for turnstiles, providing operators with the ability to control incoming and outgoing traffic effectively. This fail open module ensures that in the event of power loss, the turnstile can rotate freely, maintaining safety and accessibility. Installation is straightforward, whether in a new TURNITEC base module or as an expansion on an existing system. The module features powerful electromagnets for secure locking and is suitable for both left and right turning turnstiles. Operators can easily control the time range of the switched state via push buttons, with the set time clearly visible on the display. The module is equipped with a 24V DC power supply designed for exterior use, ensuring durability and reliability in various environments. The encapsulated control module provides superior resistance to humidity, enhancing its longevity and performance. For added security, the TT-FO2 includes a reset function that activates after one full rotation of the turnstile, preventing unauthorized access. The aluminium powder-coated housing with heat dissipation fins ensures the module remains cool during operation. The module is also expandable with the TT-COUNTER-LIGHT module for additional functionality, such as counters and signalization. Manual release by key and anti-passback security features further enhance the reliability and safety of this electromechanical module. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-CL2 | Counter & Passing Light Signals Module | Plug&Play, Bidirectional

Product Overview The TURNITEC TT-CL2 Counter & Passing Light Signals Module is a Plug&Play solution designed to enhance the functionality of your turnstile by enabling the connection of counters and passing light signals in both turning directions. The counter provides information on the number of people passing through or the number of rotations made by the turnstile, while the passing light signals ensure safe and efficient use of the turnstile. This module is easy to connect with the TT-FO32 and TT-FC32 modules and features a robust aluminium powder-coated housing with heat dissipation fins. Key Features Easy to connect with the TT-FO32 and TT-FC32 modules Controlled by means of included reed contacts Voltage-free changeover contacts (NO&NC) for passing light signal control in both CW and CCW directions (max 250V AC/30V DC, 1A) Voltage-free NO contacts for external counter connection in both rotational directions (max 250V AC/30V DC, 1A) Aluminium powder-coated housing with heat dissipation fins Product Description The TURNITEC TT-CL2 module is designed to provide additional functionality to your turnstile system by enabling the connection of counters and passing light signals. The module features easy connectivity with TT-FO32 and TT-FC32 modules and is controlled by included reed contacts. For both clockwise (CW) and counterclockwise (CCW) directions, the module provides voltage-free changeover contacts for passing light signal control and voltage-free NO contacts for external counter connection. The aluminium powder-coated housing of the TT-CL2 module is designed with heat dissipation fins, ensuring durability and efficient operation in various environments. This robust construction makes the module suitable for high-traffic areas where reliable performance is essential. The TT-CL2 module enhances the functionality and safety of your turnstile system, providing accurate counting and clear passing signals for efficient access control. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SDM4 | Hydraulic Damper for 4-Arm Turnstile (90°) | Progressive Damping

Product Overview The TURNITEC TT-SDM4 is a unique hydraulic damper designed specifically for 4-arm (90°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-SDM4 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system for 4-arm TURNITEC (90°) Continuous and progressive damping of the rotational movement Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-SDM4 Hydraulic Damper is designed to enhance the performance and safety of 4-arm (90°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, providing smooth and gradual movements and preventing the turnstile from hitting users' heels. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-SDM4 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-SDM4 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-DM3 | Hydraulic Damper for 3-Arm Turnstile (120°) | Progressive Damping

Product Overview The TURNITEC TT-DM3 is a unique hydraulic damper designed specifically for 3-arm (120°) turnstiles. This damper provides continuous and progressive damping, ensuring smooth and gradual movements of the turnstile. The first half of the rotation is undamped, while the second half is progressively damped, preventing the turnstile from hitting the user's heels and enhancing user safety. The TT-DM3 is easy to retrofit on existing TURNITEC systems, offering a high-quality, reliable solution for improving turnstile performance. Key Features Patented hydraulic damping system Continuous and progressive damping starting from 60° in the 3-arm version Ensures smooth and gradual movements of the turnstile Easy to retrofit on existing TURNITEC systems High quality and guaranteed performance, tested for 1 million movements System is unaffected by temperature changes Product Description The TURNITEC TT-DM3 Hydraulic Damper is designed to enhance the performance and safety of 3-arm (120°) turnstiles. Its patented hydraulic damping system ensures that the damping is continuous and progressive, starting from 60° of rotation. This design allows for smooth and gradual movements, preventing the turnstile from hitting users' heels and ensuring a more comfortable passage. The system is easy to retrofit on existing TURNITEC mechanisms, making it a versatile and practical upgrade for any turnstile system. The TT-DM3 damper is constructed with high-quality materials and has been tested for up to 1 million movements, guaranteeing long-term reliability and performance. Additionally, the damping system is unaffected by temperature changes, ensuring consistent performance in various environmental conditions. This makes the TURNITEC TT-DM3 an ideal choice for locations requiring reliable and efficient turnstile operation, enhancing both functionality and user safety. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC TT-SM4S | Base Mechanism for 4-Arm Turnstile (90°) | Modular, Rustproof

Product Overview The TT-SM4S TURNITEC Base Mechanism is a high-quality, modular solution for operating 4-arm (90°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-SM4S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-SM4S TURNITEC Base Mechanism offers a robust and flexible solution for 4-arm (90°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-SM4S is a practical choice for both new installations and upgrades. Installing the TT-SM4S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-SM4S a versatile and adaptable solution. Constructed from rustproof materials, the TT-SM4S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-SM4S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX TT-BM3S | TURNITEC Base Mechanism for 3-Arm Turnstile (120°)

Product Overview The TT-BM3S TURNITEC Base Mechanism is a high-quality, modular solution for operating 3-arm (120°) turnstiles. Designed for bi-directional, free-turning operation, this base mechanism can be expanded with mechanical and electromechanical locking modules and a hydraulic damper to optimize access control and usability. Constructed from rustproof materials, the TT-BM3S ensures durability and reliable performance in various environments. Key Features Designed with rustproof materials for long-lasting durability Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm IP55 housing protects against water, dirt, wind, dust, and vermin Modular system allows for further expansion and customization High quality and guaranteed performance, tested for 1 million movements Product Description The TT-BM3S TURNITEC Base Mechanism offers a robust and flexible solution for 3-arm (120°) turnstile operations. Its rustproof construction and IP55-rated housing provide excellent protection against environmental factors, ensuring long-term durability and performance. The modular design allows for easy expansion and customization, making it suitable for a wide range of access control applications. With the ability to be mounted easily using the optional welding plate and spline axle, the TT-BM3S is a practical choice for both new installations and upgrades.   Specifications Materials: Rustproof construction for enhanced durability Mounting: Easy to mount with optional welding plate and spline axle Dimensions: 550 x 350 x 170 mm Protection: IP55 housing protects the mechanism against environmental factors Modularity: Expandable with mechanical and electromechanical locking modules and hydraulic damper Performance: Tested for 1 million movements to ensure reliability Installation and Usage Installing the TT-BM3S TURNITEC Base Mechanism is straightforward, thanks to its optional welding plate and spline axle. The mechanism is designed for bi-directional, free-turning operation and can be easily expanded with additional modules to enhance functionality. The IP55 housing provides robust protection against water, dirt, wind, dust, and vermin, ensuring reliable performance in various environments. The modular system allows for customization to meet specific access control requirements, making the TT-BM3S a versatile and adaptable solution. Durability and Protection Constructed from rustproof materials, the TT-BM3S TURNITEC Base Mechanism is built to withstand harsh environmental conditions. The IP55-rated housing protects the internal components from water, dirt, wind, dust, and vermin, ensuring long-lasting reliability. The mechanism has been tested for 1 million movements, guaranteeing high performance and durability. This makes the TT-BM3S an ideal choice for applications that require robust and dependable access control solutions. NOTE: Images may differ from the actual product.

LOCINOX TURNITEC | Modular (Electro)Mechanical Control Unit for Turnstiles

Product Overview The TURNITEC Modular (Electro)Mechanical Control Unit is designed to provide a high-quality, maintenance-free turnstile solution that can be customized to match the design of your fencing. Available in both 3-arm (120°) and 4-arm (90°) configurations, the TURNITEC mechanism is applicable to any turnstile and ensures quick installation. Its 100% modular design allows for easy adaptation to meet specific customer requirements. Optional features include a damping system for smooth operation and interchangeable left/right mechanical or electromechanical modules for fail open or fail close functionality. Key Features 100% modular system: customizable and expandable Available for 3-arm (120°) and 4-arm (90°) turnstiles Optional interchangeable left/right mechanical or electromechanical modules (Fail Open or Fail Close) Automatic return to starting position after every passage Anti-passback security: locks after a 60° or 45° rotation to prevent simultaneous passage of two persons Robust connection with the turnstile via a 34 mm diameter spline axle (length 325 mm) Manufactured from rust-proof materials (stainless steel and aluminium) Optional damping system for smooth and gradual movements, unaffected by temperature changes Adjustable signal duration IP55 housing protects the mechanism against water, dirt, wind, dust, and vermin Product Description The TURNITEC control unit is designed for flexibility and durability, ensuring a maintenance-free solution for turnstile applications. Its modular nature allows for easy customization and expansion, catering to specific needs and preferences. The optional damping system ensures smooth operation, while the robust construction from rust-proof materials guarantees long-term reliability. The IP55-rated housing protects the mechanism from environmental factors, making it suitable for both indoor and outdoor use. Specifications Modularity: 100% modular system, expandable as needed Configurations: Available for 3-arm (120°) and 4-arm (90°) turnstiles Modules: Optional fail open and fail close electromechanical modules Operation: Automatic return to starting position, anti-passback security Connection: 34 mm diameter spline axle, length 325 mm Materials: Rust-proof stainless steel and aluminium Damping System: Optional, provides smooth movement unaffected by temperature Signal Duration: Adjustable Protection: IP55 housing Installation and Usage Installing the TURNITEC control unit is straightforward, thanks to its modular design and quick installation features. The unit can be configured with either 3-arm or 4-arm turnstiles and offers optional mechanical or electromechanical modules for fail open or fail close functionality. The anti-passback security feature ensures that only one person can pass through the turnstile at a time, enhancing security. The optional damping system provides smooth and controlled movements, unaffected by temperature changes. Durability and Protection The TURNITEC control unit is constructed from high-quality rust-proof materials, including stainless steel and aluminium, ensuring long-lasting durability. The IP55-rated housing protects the mechanism from water, dirt, wind, dust, and vermin, making it suitable for harsh environmental conditions. The robust design and reliable performance make the TURNITEC control unit an excellent choice for high-traffic areas requiring secure and efficient access control. Product Guide Product CodeTurnstileDamperFail Open ElectromoduleFail Close ElectromoduleCounter & Passing Light Signals Module TTEC-BMS-FO2-FC2-DM-CL2 3-arm turnstile (120°) Yes 1x 1x Yes TTEC-BMS-FC2-FC2-DM-ZCL 3-arm turnstile (120°) Yes / 2x / TTEC-BMS-FO2-FC2-DM-ZCL 3-arm turnstile (120°) Yes 1x 1x / TTEC-BMS-FO2-FO2-DM-ZCL 3-arm turnstile (120°) Yes 2x / / TTEC-SMS-FO2-FC2-SDM-CL2 4-arm turnstile (90°) Yes 1x 1x Yes TTEC-SMS-FC2-FC2-SDM-ZCL 4-arm turnstile (90°) Yes / 2x / TTEC-SMS-FO2-FC2-SDM-ZCL 4-arm turnstile (90°) Yes 1x 1x / TTEC-SMS-FO2-FO2-SDM-ZCL 4-arm turnstile (90°) Yes 2x / / NOTE: Images may differ from the actual product.

LOCINOX DC-ACCESS-12V-20W All-in one 12V DC Access Module with integrated timer

DC-ACCESS-12V-20W All-in one 12V DC Access Module with integrated timer All-in-one, Plug & Play Access Module (220V AC input). Including power supply and integrated timer with easy to read display and easy to operate: time range (1 to 99s) of switched state controlled by push buttons. A 12V DC Fail Open or Fail Close device can be easily connected to the module. SPECIFICATIONS Mounting on DIN-rail or directly Time range (1 to 99s) of switched state controlled by push buttons Set time clearly visible on display Robust control module: encapsulated for superior humidity resistance Input voltage: 220V AC / Maximum Output power: 20W Connection between module and power supply by means of Plug&Play connector Designed with heat-dissipation fins at the back Aluminium powder coated  

LOCINOX N-LINE MAG KIT-3000 | Profile with 2x MAGMAG3000 & 3006PULL | 300kg Force

Product Overview The N-LINE MAG KIT-3000 is a comprehensive set designed for swing gate security. It includes an N-LINE MAG profile, two MAGMAG3000 magnetic locks, and a 3006PULL handle. This set offers an aesthetic solution to prevent passersby from bumping into magnetic lock parts, ensuring both security and visual appeal. The adjustable aluminium design profile can be mounted above, below, and in between the magnets, providing flexibility and ease of installation. Key Features Adjustable aluminium design profile for versatile mounting Profile length of 2 meters Delivered with self-drilling screws, compatible with Quick-Fix Includes 2 plastic cover caps and 6 in-between caps Aluminium 3006PULL handle included Includes 2x MAGMAG3000 magnetic locks Voltage: 12V / 24V DC Current: 500mA / 12V or 360mA / 24V Product Description The N-LINE MAG KIT-3000 is designed to provide a robust and aesthetic solution for securing swing gates. The kit includes a 2-meter N-LINE MAG profile, two powerful MAGMAG3000 magnetic locks, and a stylish 3006PULL handle. This combination ensures effective security while maintaining a clean and unobtrusive appearance. The adjustable aluminium design profile allows for versatile mounting options, and the Quick-Fix system simplifies the installation process. Specifications Profile Length: 2 meters Magnets: 2x MAGMAG3000 magnetic locks with 300kg pulling force each Handle: Aluminium 3006PULL handle included Voltage: 12V / 24V DC Current: 500mA / 12V or 360mA / 24V Installation: Delivered with self-drilling screws, compatible with Quick-Fix Covers: 2 plastic cover caps and 6 in-between caps included Installation and Usage Installing the N-LINE MAG KIT-3000 is straightforward, thanks to the included self-drilling screws and Quick-Fix compatibility. The 2-meter profile can be mounted above, below, or in between the magnets, providing flexibility in installation. The MAGMAG3000 magnetic locks offer a strong 300kg pulling force each, ensuring reliable security. The aluminium 3006PULL handle adds a finishing touch to the gate, enhancing both functionality and aesthetics. Durability and Protection The N-LINE MAG KIT-3000 is built to withstand outdoor conditions, with components that are resistant to weather and corrosion. The aluminium profile and handle are powder-coated for added durability, while the MAGMAG3000 locks feature a special two-layer protective coating. This ensures long-lasting performance and protection against the elements. The kit's robust construction and high-quality materials make it an ideal choice for secure and durable gate installations.

LOCINOX MAGMAG | Surface Mounted Magnetic Lock | 300kg or 600kg Pulling Force

Product Overview The MAGMAG Surface Mounted Magnetic Lock is a robust and reliable access control solution designed for quick and easy installation. Available in two versions, MAG3000 with 300 kg pulling force and MAG6000 with 600 kg pulling force, this magnetic lock provides strong security for various applications. The aluminium powder-coated housing ensures durability and long-lasting performance, even in harsh outdoor environments. The Quick-Fix system allows for fast and efficient mounting without the need for welding boxes. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Powder-coated aluminium housing Anti-residual magnetism kick-off system Raised edge on the magnet housing prevents crowbar insertion between magnet and armature plate Fail open mechanism Fast and easy fixing by means of 5 holes with Quick-Fix Voltage: 12V / 24V DC MAG3000: Minimal pulling force: 3000N (300 kg) MAG6000: Minimal pulling force: 6000N (600 kg) Current MAG3000: 500 mA / 12V or 250 mA / 24V Current MAG6000: 460 mA / 12V or 230 mA / 24V Product Description The MAGMAG Surface Mounted Magnetic Lock provides robust security and reliable performance for access control applications. Available in two versions with 300 kg or 600 kg pulling force, this lock is designed for quick installation using the Quick-Fix system. The aluminium powder-coated housing ensures durability and resistance to harsh outdoor conditions, while the special two-layer protective coating provides additional protection against the elements. The fail-open mechanism ensures safety in the event of power failure. Installation and Usage Installing the MAGMAG magnetic lock is efficient and straightforward with the Quick-Fix system, requiring only five holes for mounting. The lock is compatible with both 12V and 24V DC power sources, with the MAG3000 version drawing 500 mA at 12V or 250 mA at 24V, and the MAG6000 version drawing 460 mA at 12V or 230 mA at 24V. The raised edge on the magnet housing prevents tampering with a crowbar, enhancing security. The lock's fail-open mechanism ensures that it remains open in the event of a power failure, providing an additional layer of safety. Durability and Protection The MAGMAG magnetic lock is built to withstand harsh weather conditions, with a special two-layer protective coating and a powder-coated aluminium housing that resists corrosion. Its SGS-certified salt spray resistance ensures long-lasting durability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, ensuring reliable operation. These features make the MAGMAG lock an ideal choice for secure and durable access control in various environments.

LOCINOX MAG | Surface Mounted Magnetic Lock with Integrated Handles | 300kg or 600kg Pulling Force

Product Overview The MAG Surface Mounted Magnetic Lock with Integrated Handles is an advanced access control solution designed for ease of installation and reliable security. Available in two versions, MAG3000 and MAG6000, with pulling forces of 300 kg and 600 kg respectively, this lock ensures robust protection for various applications. The aluminium powder-coated housing with integrated design handles adds an aesthetic touch to your access control gate. The Quick-Fix system enables fast and strong fixing, eliminating the need for welding boxes. With a special two-layer protective coating, the MAG lock is built for long-lasting outdoor use. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Powder-coated aluminium housing Anti-residual magnetism kick-off system Raised edge on the magnet housing prevents crowbar insertion between magnet and armature plate Fail open mechanism Fast and easy fixing by means of 5 holes with Quick-Fix Voltage: 12V / 24V DC MAG3000: Minimal pulling force: 3000N (300 kg) MAG6000: Minimal pulling force: 6000N (600 kg) Current MAG3000: 500 mA / 12V or 250 mA / 24V Current MAG6000: 460 mA / 12V or 230 mA / 24V Product Description The MAG Surface Mounted Magnetic Lock is designed to provide high-security access control with an integrated aesthetic appeal. Its robust construction, featuring powder-coated aluminium housing and integrated handles, ensures both durability and a sleek look. The lock's special two-layer protective coating and SGS-certified salt spray resistance guarantee reliable performance in outdoor environments. The Quick-Fix system simplifies installation, making the MAG lock a practical choice for various security applications. Installation and Usage Installing the MAG magnetic lock is efficient and straightforward, thanks to the Quick-Fix system, which requires only five holes. The lock is compatible with both 12V and 24V DC power sources, with the MAG3000 version drawing 500 mA at 12V or 250 mA at 24V, and the MAG6000 version drawing 460 mA at 12V or 230 mA at 24V. The raised edge on the magnet housing prevents tampering with a crowbar, enhancing security. The lock's fail-open mechanism ensures that it remains open in the event of a power failure, providing an additional layer of safety. Durability and Protection The MAG magnetic lock is built to withstand harsh weather conditions, with a special two-layer protective coating and a powder-coated aluminium housing that resists corrosion. Its SGS-certified salt spray resistance ensures long-lasting durability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, ensuring reliable operation. These features make the MAG lock an ideal choice for secure and durable access control in various environments.

LOCINOX S-MAG | Integrated Magnet Lock for Sliding Gates | 250kg Holding Force

Product Overview The S-MAG is an integrated magnet lock designed specifically for sliding gates, offering robust security and reliability. With a guaranteed tensile strength of 250 kg, this magnet lock ensures secure locking under various conditions. It is built to withstand extreme weather, and its rubber bumpers protect the gate and accessories from damage due to harsh handling. The flexible assembly of the armature plate guarantees proper closing even if the gate is not perfectly aligned, making it an ideal choice for sliding gates. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Minimal pulling force: 2500N (250 kg) Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Product Description The S-MAG integrated magnet lock is the perfect solution for securing sliding gates. Its robust construction and guaranteed holding force of 250 kg ensure reliable performance in various conditions. The magnet lock is tested to withstand 500 hours of salt spray, certified by SGS (ISO 9227), making it suitable for harsh outdoor environments. The special two-layer protective coating further enhances its durability, while the anti-residual magnetism kick-off system ensures efficient operation. Installation and Usage Installing the S-MAG magnet lock is straightforward, with compatibility for both 12V and 24V DC power sources. The lock's rubber bumpers prevent gate shaking and damage, ensuring smooth operation even under harsh handling. The flexible armature plate assembly guarantees proper closing, even if the gate is not perfectly aligned. These features make the S-MAG an ideal choice for enhancing the security and functionality of sliding gates. Durability and Protection The S-MAG magnet lock is built to endure extreme weather conditions, with a robust construction that includes a special two-layer protective coating. Its SGS-certified salt spray resistance ensures longevity and reliability in outdoor use. The rubber bumpers and anti-residual magnetism system further enhance the lock's durability, providing a secure and efficient solution for sliding gate applications.

LOCINOX N-LINE-B-MAG-KIT | Swing Gate Electromagnetic Set | 2x MAGUNIT & 3006PULL

Product Overview The N-LINE-B-MAG-KIT is an electromagnetic set designed for swing gates, featuring easy fixing to the gate frame. This comprehensive set includes two MAGUNIT magnetic locks, the 3006PULL, and an aesthetically designed profile for a sleek finish. The set is available in ZILV and RAL9005 colors, making it both functional and visually appealing for various gate installations. Key Features Includes 2 integrated magnets equipped with Quick-Fix mounting (MAGUNIT-2500) Includes aluminium filling profile with Quick-Fix mounting (N-LINE-B-MAG profile) Profile length of 2 meters Includes 2 aluminium covers for aesthetic finishing on top and bottom Specially designed for exterior use Voltage: 12V / 24V DC Current: 460mA / 12V or 230mA / 24V Product Description The N-LINE-B-MAG-KIT provides a robust and aesthetically pleasing solution for securing swing gates. The set includes two powerful MAGUNIT magnetic locks with Quick-Fix mounting, ensuring a strong and reliable hold. The 3006PULL component and the N-LINE-B-MAG profile offer additional functionality and a polished look. This set is designed for exterior use, with components that withstand harsh weather conditions while maintaining high performance. Specifications Magnets: 2 integrated magnets (MAGUNIT-2500) with Quick-Fix mounting Profile: Aluminium filling profile with Quick-Fix mounting (N-LINE-B-MAG profile), 2 meters long Cover: 2 aluminium covers for aesthetic finishing on top and bottom Use: Specially designed for exterior use Voltage: 12V / 24V DC Current: 460mA / 12V or 230mA / 24V Colors: Available in ZILV and RAL9005 Installation and Usage Installing the N-LINE-B-MAG-KIT is straightforward, thanks to the Quick-Fix mounting system. The 2-meter aluminium profile fits seamlessly with the magnetic locks and 3006PULL, providing a secure and durable solution for swing gates. The kit operates efficiently on both 12V and 24V DC power sources, with a current draw of 460mA at 12V or 230mA at 24V. The aluminium covers add an aesthetic finish, enhancing the overall appearance of the gate installation. Durability and Protection Designed for outdoor use, the N-LINE-B-MAG-KIT features components that are resistant to weather conditions and corrosion. The aluminium profile and covers ensure long-lasting durability and a sleek appearance. The integrated MAGUNIT magnetic locks provide a reliable holding force, securing the gate effectively. Available in ZILV and RAL9005, the set combines functionality with visual appeal, making it an ideal choice for enhancing the security and aesthetics of swing gates.

LOCINOX N-LINE-B-MAG | Aluminium Finishing Profile for Swing Gates | Compatible with MAGUNIT

Product Overview The N-LINE-B-MAG is an aluminium finishing profile designed for swing gates, providing an aesthetic and safe solution when combined with one or more MAGUNIT-2500 magnetic locks. This profile ensures that passersby do not stumble against protruding magnetic parts, offering a sleek and secure finishing touch to your gate installation. The adjustable, powder-coated aluminium design is specifically crafted for exterior use, ensuring durability and a polished appearance. Key Features Profile length of 2 meters Fast and easy fixing with Quick-Fix Powder-coated aluminium housing Specially designed for exterior use Compatible with MAGUNIT-2500 magnetic locks Product Description The N-LINE-B-MAG aluminium finishing profile is the ideal solution for enhancing the appearance and safety of swing gates equipped with MAGUNIT-2500 magnetic locks. This 2-meter profile offers a seamless and polished look, preventing any potential hazards posed by protruding magnetic components. The powder-coated aluminium construction ensures resistance to weather conditions, making it perfect for outdoor installations. Installation and Usage Installing the N-LINE-B-MAG profile is simple and efficient, thanks to the Quick-Fix system. This feature allows for quick attachment to the gate, providing a secure and stable finishing touch. The profile is designed to be adjustable, accommodating different gate sizes and configurations. Its compatibility with MAGUNIT-2500 magnetic locks ensures a cohesive and functional gate security system. Durability and Protection Constructed from powder-coated aluminium, the N-LINE-B-MAG profile is highly durable and resistant to corrosion, ensuring long-lasting performance in outdoor environments. The profile's robust design protects against the elements while maintaining its aesthetic appeal. This combination of durability and sleek design makes the N-LINE-B-MAG an excellent choice for finishing swing gates with integrated magnetic locks.

LOCINOX MAGUNIT-2500 | Magnet and Anchor Plate for N-LINE Profiles | 250kg Holding Force

Product Overview The MAGUNIT-2500 is a magnet and anchor plate set designed for use with N-LINE-B-MAG and N-LINE-S-MAG profiles. This set includes all necessary fittings to combine with these profiles, and multiple MAGUNITs can be mounted within the N-LINE profile. The MAGUNIT-2500 offers a guaranteed holding force of 250 kg, making it a reliable and robust solution for securing gates and other applications. Its special two-layer protective coating and 500-hour salt spray resistance ensure durability in outdoor environments. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Minimal pulling force: 2500N (250 kg) Product Description The MAGUNIT-2500 magnet and anchor plate set is an essential component for enhancing the security of gates and other applications using N-LINE-B-MAG and N-LINE-S-MAG profiles. Its robust construction ensures a reliable holding force of 250 kg, tested on every magnetic lock for guaranteed performance. The set's special two-layer protective coating and SGS-certified salt spray resistance make it suitable for harsh outdoor environments, ensuring long-lasting durability and functionality. Specifications Holding Force: 250 kg (2500N) Salt Spray Resistance: 500h, SGS certified (ISO 9227) Coating: Special two-layer protective coating for outdoor use Anti-Residual Magnetism: Kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Installation and Usage Installing the MAGUNIT-2500 is straightforward, with all necessary fittings included for easy combination with N-LINE-B-MAG and N-LINE-S-MAG profiles. Multiple MAGUNITs can be mounted within the N-LINE profile, providing flexible and scalable security solutions. The magnet operates efficiently on both 12V and 24V DC power sources, with a current draw of 460mA at 12V or 230mA at 24V. The anti-residual magnetism kick-off system ensures the lock does not retain magnetic force after disengagement, enhancing security and reliability. Durability and Protection The MAGUNIT-2500 is built to withstand challenging outdoor conditions, featuring a special two-layer protective coating that offers superior resistance to corrosion and wear. Its 500-hour salt spray resistance, certified by SGS (ISO 9227), guarantees performance in environments exposed to moisture and salt. This durability ensures the MAGUNIT-2500 remains reliable over time, making it a dependable choice for securing gates and other applications requiring robust magnetic locks.

LOCINOX B-MAG | Integrated Magnet Lock for Swing Gates | 250kg Holding Force

Product Overview The B-MAG Integrated Magnet Lock for Swing Gates offers a secure and aesthetically pleasing solution for gate locking needs. Designed to be assembled in the pole, this magnet lock remains invisible, maintaining maximum passage space while ensuring security. The Quick-Fix system allows for quick and easy installation. With a guaranteed tensile strength of 250 kg, the B-MAG lock withstands extreme weather conditions, and the rubber bumpers prevent gate shaking and damage. The flexible assembly of the armature plate ensures proper closing even if the gate is not perfectly aligned. Key Features Guaranteed holding force tested on every magnetic lock Minimal pulling force: 2500N (250 kg) 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Quick-Fix system for easy installation Rubber bumpers to prevent gate shaking and damage Product Description The B-MAG surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Installation and Usage Installing the B-MAG magnet lock is straightforward with the Quick-Fix system, allowing for a quick and secure setup. The lock can be connected to either 12V or 24V DC power sources, accommodating different power requirements. The flexible armature plate assembly ensures that the gate closes properly even if it is not perfectly aligned, providing reliable security. The rubber bumpers further enhance stability by preventing gate shaking and reducing wear and tear. Durability and Protection The B-MAG magnet lock is built to withstand harsh environmental conditions, with a special two-layer coating that offers exceptional protection against corrosion. Its 500-hour salt spray resistance, certified by SGS (ISO 9227), ensures longevity and reliability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, enhancing security and performance. These features make the B-MAG an ideal choice for securing swing gates in various settings.

LOCINOX INTRALEC | Built-In Electric Keep for Insert Locks | 12V-24V AC/DC

Product Overview The INTRALEC is an elegant and discreet built-in electric keep designed for insert locks. Its sleek design allows it to be seamlessly integrated into the post, providing a secure yet unobtrusive solution for access control. The patented Click-It system ensures fast and easy installation without the need for a strike plate, and a mechanical override is also possible. The INTRALEC is available in Fail Open (Ruptura) and Fail Close (Emissa) versions, catering to various security requirements. Key Features Tested up to 500,000 movements Fast and easy fixing with Click-It system Resistance to pressure on the latch bolt: 300 kg Deep closure of 17.5 mm of the latch bolt Easy left or right changing Corrosion-resistant black anodized aluminum housing Available for profiles with 40 mm and 50 mm depth Voltage: 12V-24V AC/DC Consumption: 10W / 12V - 0.8A / 24V - 0.4A Product Description The INTRALEC built-in electric keep offers a secure and durable solution for gates equipped with insert locks. Its elegant design allows it to blend seamlessly into the gate post, providing unobtrusive security. The keep is robustly tested to withstand up to 500,000 movements, ensuring long-lasting reliability. The Click-It system simplifies installation, while the deep closure and high pressure resistance provide enhanced security. Installation and Usage Installing the INTRALEC is straightforward with the patented Click-It system, which eliminates the need for additional strike plates. This keep is designed for easy left or right changing, making it versatile for various installations. It operates on a wide voltage range of 12V-24V AC/DC, and its low power consumption ensures efficiency. The mechanical override feature adds an extra layer of security, making it suitable for high-security applications. Durability and Protection The INTRALEC electric keep is constructed from corrosion-resistant black anodized aluminum, ensuring it remains durable and functional in harsh environments. Its resistance to pressure on the latch bolt up to 300 kg makes it a reliable choice for securing gates. Available for profiles with 40 mm and 50 mm depth, this keep is versatile and adaptable to different gate designs. With its elegant design and robust features, the INTRALEC offers both aesthetics and security.

LOCINOX MODULEC-SF | Surface Mounted Electric Strike | Forty, Fifty, Sixtylock

Product Overview The MODULEC-SF is a surface mounted electric strike designed for use with Forty, Fifty, and Sixtylock insert locks. This electric strike features a narrowed stop plate, making it ideal for various gate profiles. Its quick and easy installation is ensured by the patented Quick-Fix system, eliminating the need for drilling or laser-cutting the gate profile. The black anodized housing provides corrosion and scratch resistance, ensuring long-lasting durability. The MODULEC-SF is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), and can be connected to both 12V-24V AC/DC. Key Features Tested up to 500,000 movements Fast and easy fixing with Quick-Fix Resistance to pressure on the latch bolt: 300 kg Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm width Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Available in two colours: RAL 9005 & ALUM Product Description The MODULEC-SF surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Installation and Usage Installing the MODULEC-SF is straightforward with the Quick-Fix system, allowing for rapid and secure attachment to gate profiles. The electric strike is designed for easy left or right changing, providing flexibility in installation. Compatible with both 12V and 24V AC/DC power supplies, the MODULEC-SF is versatile and adaptable to different power setups. The adjustable gate profile width of 40-60 mm ensures compatibility with a range of gate designs. Durability and Protection The MODULEC-SF electric strike is built to withstand rigorous use, tested up to 500,000 movements. Its robust construction includes a black anodized aluminum housing that resists corrosion and scratching, ensuring longevity and reliability. The strike's resistance to 300 kg of pressure on the latch bolt provides added security, making it an excellent choice for high-security applications. Available in RAL 9005 and ALUM colors, the MODULEC-SF combines functionality with aesthetic versatility.

LOCINOX MODULEC-SH | Surface Mounted Electric Security Keep | 12V-24V AC/DC

Product Overview The MODULEC-SH is a surface mounted electric security keep designed to replace your SHKL keep with enhanced security features. It offers Fail Close and Fail Open functionalities, making it versatile for various security needs. Easy to install with the patented Quick-Fix system, this keep is suitable for 12V-24V AC/DC applications. The MODULEC-SH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), ensuring reliable performance in different scenarios. Key Features Tested up to 500,000 movements Resistance to pressure on the latch bolt: 300 kg Easy mounting with Quick-Fix Same drilling pattern as SA, SH, and SM keeps Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm depth Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Product Description Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Overview The MODULEC-SH electric security keep offers robust performance and enhanced security for various access control needs. Its ability to withstand a pressure resistance of 300 kg on the latch bolt ensures high durability and reliability. Available in both Fail Close (Emissa) and Fail Open (Ruptura) versions, the MODULEC-SH can be tailored to meet specific security requirements. The corrosion-resistant black anodized aluminum housing and easy left or right changing feature add to its versatility, making it suitable for a wide range of gate profiles. Installation and Usage Installing the MODULEC-SH is straightforward with the Quick-Fix system, designed for easy mounting on new or existing gates. The keep is compatible with gate profiles of 40-60 mm depth and follows the same drilling pattern as SA, SH, and SM keeps, ensuring a seamless replacement. The MODULEC-SH operates on 12V-24V AC/DC with a power consumption of 15W, making it energy efficient and effective for various applications. With its high durability and resistance to environmental factors, the MODULEC-SH is ideal for both indoor and outdoor use. Durability and Protection The MODULEC-SH is built to withstand harsh conditions with its corrosion-resistant black anodized aluminum housing. It has been tested for up to 500,000 movements, ensuring long-term reliability and performance. The keep's ability to withstand a pressure resistance of 300 kg on the latch bolt provides robust security, making it an excellent choice for high-security applications. Additionally, the Fail Close and Fail Open functionalities ensure the keep meets diverse security needs, providing flexibility and peace of mind.

LOCINOX SEH | Electric Strike for Insert Locks | 500kg Pulling Force

Product Overview The SEH Electric Strike is designed for use with H-Metal and H-Wood insert locks, providing a robust and reliable solution for access control. Equipped with a blocking system that withstands a pulling force of up to 500 kg, this electric strike ensures maximum security. The SEH is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), making it versatile for various security needs. Its water-resistant and weatherproof design guarantees durability in different environmental conditions. Key Features Available in two versions: Emissa (Fail Close) and Ruptura (Fail Open) Easy left or right changing Suitable for post profiles of 50 mm and more Voltage: 12V AC/DC Current for Emissa: 1A Current for Ruptura: 1.5A Water-resistant and weatherproof Pressure resistance on self-latching bolt: 500 kg Product Description The SEH Electric Strike is a highly durable and secure solution for access control in various settings. Its ability to withstand a pulling force of 500 kg makes it exceptionally strong and reliable. Available in both Fail Close and Fail Open versions, the SEH electric strike can be tailored to meet specific security requirements. The easy left or right changing feature enhances its versatility, while its compatibility with post profiles of 50 mm and more ensures broad applicability. Installation and Usage Installing the SEH electric strike is straightforward, thanks to its design for easy left or right changing. The strike is compatible with H-Metal and H-Wood insert locks, making it suitable for a variety of applications. It operates on 12V AC/DC, with the Emissa version requiring 1A and the Ruptura version requiring 1.5A. The water-resistant and weatherproof construction ensures reliable performance in various environmental conditions, making it ideal for both indoor and outdoor use. Durability and Protection The SEH electric strike is built to withstand harsh conditions, with a water-resistant and weatherproof design that ensures long-term durability. Its anodized aluminium housing protects against vandalism and environmental damage, while the stainless steel push buttons are designed to endure frequent use. The strike's ability to withstand a 500 kg pulling force provides robust security, making it an excellent choice for high-security applications.

LOCINOX SWITCHSTONE-STD-X-230 | 2-Channel Relay Module | NO/NC Contact

Product Overview The SWITCHSTONE-STD-X-230 is a 2-channel relay module designed for secure and versatile switching applications. Developed to work in combination with devices such as the SlimStone-X keypad, this module ensures maximum security with its two external relays, each featuring Common, Fail Open, and Fail Close contacts. Capable of switching voltages up to 250V AC/26V DC, the SWITCHSTONE-STD-X-230 is suitable for a wide range of applications, including lighting control. The module supports long-range secure 2-wire communication, making it ideal for various installations. Key Features Includes 2 250V AC/26V DC relays, each with COM, Fail Open, and Fail Close contact Long range secure 2-wire communication with the SlimStone-X, up to 300 m distance Auto back-up functionality DIN-rail mountable Tested from -30°C up to +85°C Relay switching duration adjustable between pulse and timer mode (500 ms - 99 s) To be used exclusively with the Powerstone 60W power supply Current: maximum 0.07 A Consumption: maximum 1.7 W Product Description The SWITCHSTONE-STD-X-230 relay module is engineered for reliable and secure switching in various applications. Its robust design includes two relays capable of handling up to 250V AC/26V DC, making it suitable for controlling lighting and other electrical devices. The module's secure 2-wire communication with the SlimStone-X keypad ensures long-range operation up to 300 meters. Auto back-up functionality adds an extra layer of reliability, while the DIN-rail mountable design facilitates easy installation. Installation and Usage Installing the SWITCHSTONE-STD-X-230 is straightforward, with the module easily mountable on a DIN rail. It requires the Powerstone 60W power supply for optimal operation. The relay switching duration can be adjusted between pulse and timer mode, providing flexibility for different applications. The module's secure communication capabilities ensure reliable performance over long distances, making it ideal for various access control and automation setups. Durability and Protection The SWITCHSTONE-STD-X-230 is built to withstand extreme temperatures, tested from -30°C to +85°C, ensuring reliable operation in diverse environments. Its robust construction and secure communication features make it a dependable choice for high-security applications. The module's ability to switch high voltages and its auto back-up functionality further enhance its reliability and versatility in various installations.

LOCINOX SLIMSTONE-2 | Weather Resistant Keypad | Frost-Free, 2 Integrated Relays

Product Overview The SLIMSTONE-2 is a sturdy, frost-free, and weather-resistant keypad designed for maximum security and durability. Equipped with 2 integrated relays featuring Fail Open and Fail Close contacts, this keypad easily connects to Locinox and third-party automation products. The integrated LED lighting, smart heating, and IP68 waterproof rating ensure reliable operation in the harshest conditions. Its aluminium vandal-proof housing and scratch-resistant textured lacquer make it ideal for high-security applications. Key Features IP68 rated - Extremely resistant to water and dust Aluminium vandal-proof housing with scratch-resistant textured lacquer Energy efficient adjustable white LED lights Highly resistant stainless steel push buttons tested for 1,000,000 pushes and more Easy installation and configuration Easy programming of up to 100 user codes Frost-free thanks to smart heating Tested from -30°C up to +85°C Time range adjustable between pulse and timer mode (100ms - 99s) Working voltage keypad from 10 up to 26 Volt AC/DC Current: 1.0 A (with heating) 2 integrated switching relays: 2 x NO - 2 x NC - 2 x COM (Max. 2A, 60W, 26V AC/DC) 2 m connection cable included Consumption: 1.5 W (> 5°C) + 12 W at max heating (< -25°C) Product Description The SLIMSTONE-2 keypad is designed to provide robust security and durability in all weather conditions. Its IP68 rating ensures exceptional resistance to water and dust, making it ideal for outdoor installations. The keypad's aluminium housing is vandal-proof and scratch-resistant, providing long-lasting protection. With the ability to program up to 100 user codes and integrated LED lighting, the SLIMSTONE-2 is perfect for a wide range of security applications. Installation and Usage Installing the SLIMSTONE-2 is straightforward, with easy configuration and programming. The keypad supports long-range communication and features smart heating to prevent frost buildup, ensuring reliable operation in extreme temperatures from -30°C to +85°C. The adjustable time range between pulse and timer mode adds versatility to its usage, while the included 2 m connection cable facilitates convenient installation. Durability and Protection The SLIMSTONE-2's IP68 rating and robust construction make it highly resistant to environmental factors. Its aluminium housing and stainless steel push buttons are designed to withstand heavy usage and potential vandalism. The smart heating system keeps the keypad frost-free, maintaining its functionality in freezing conditions. With integrated relays and energy-efficient LED lights, the SLIMSTONE-2 keypad offers a reliable and secure solution for various access control needs.

LOCINOX SLIMSTONE-X | Frost-Free Watertight Keypad | Robust Security

Product Overview The SLIMSTONE-X is a strong, frost-free, and watertight keypad designed for maximum security and durability. Developed to work seamlessly with the SwitchStone-STD relay module, the SlimStone-X keypad offers robust protection against burglary with two external relays, providing both Fail Open and Fail Close contacts. This keypad is easy to install and configure, and is built to withstand the harshest weather conditions, boasting an IP68 rating for water and dust resistance. Key Features IP68 rated - Extremely resistant to water and dust Long range secure 2-wire communication with SwitchStone-STD, distance up to 300 m Auto back-up functionality Aluminium vandal-proof housing with scratch-resistant textured lacquer Secured against burglary thanks to external relay Highly resistant stainless steel push buttons tested for 1,000,000 pushes and more Easy programming of up to 400 user codes Frost-free thanks to smart heating Tested from -30°C up to +85°C To be used exclusively with the Powerstone 60W power supply Energy efficient adjustable white LED lights Current: 520 mA (with heating) Consumption: 1.5 W (> 5°C) + 12 W at max heating (< -25°C) 2 m connection cable included Product Description The SLIMSTONE-X keypad is designed to offer high security and durability in any environment. Its IP68 rating ensures it is highly resistant to water and dust, making it perfect for outdoor installations. The keypad's aluminium housing is vandal-proof and scratch-resistant, providing long-lasting protection. With the ability to program up to 400 user codes and secure 2-wire communication with the SwitchStone-STD relay module, the SLIMSTONE-X is ideal for various security applications. Installation and Usage Installing the SLIMSTONE-X is straightforward, with easy configuration and programming. The keypad supports long-range communication up to 300 m with the SwitchStone-STD relay module, ensuring reliable operation even over extended distances. The smart heating feature keeps the keypad frost-free, making it suitable for extreme temperatures from -30°C to +85°C. For optimal performance, use the Powerstone 60W power supply. Durability and Protection The SLIMSTONE-X is built to endure the toughest conditions. Its IP68 rating ensures it remains watertight and dustproof, while the anodized aluminium housing protects against vandalism and scratches. The stainless steel push buttons are designed to withstand over 1,000,000 presses, ensuring long-term functionality. Additionally, the smart heating feature prevents frost buildup, maintaining the keypad's usability in freezing temperatures.

LOCINOX RHINO | 180° Gate Closer | Hydraulic, Direct Hinge Connection

Product Overview The RHINO Aesthetical 180° Gate Closer is designed to transform your 180° hinge into a self-closing solution. With a direct connection to the Locinox hinge, the Rhino hydraulic gate closer offers a discreet look and efficient energy transmission to ensure the gate closes perfectly every time. The anodized aluminium housing provides durability and smooth operation in any weather condition. For an extremely efficient installation, the Rhinodrill jig is recommended. Key Features 180° hydraulic gate closer with adjustable speed and final snap Closing speed unaffected by temperature changes Compact and aesthetic design Scratch resistant and corrosion-free anodized aluminium housing Direct assembly on 180° hinges M16 & M20 (GBMU & GBMU4D) Bearing eyebolt recommended (1034ROLL-M16) Integrated pre-tension for extremely smooth installation Suitable for left and right turning gates Easy to open with a maximum of 20 Nm Product Description The RHINO Hydraulic 180° Gate Closer offers a robust and aesthetically pleasing solution for self-closing gates. The direct connection to Locinox hinges ensures a seamless integration and efficient energy transmission, allowing the gate to close smoothly and securely. The anodized aluminium housing provides a durable, scratch-resistant, and corrosion-free finish, ensuring long-lasting performance in any weather condition. Installation and Usage Installing the RHINO gate closer is straightforward, especially when using the recommended Rhinodrill jig for precision. The integrated pre-tension feature ensures an extremely smooth installation process. This gate closer is compatible with 180° hinges M16 & M20 (GBMU & GBMU4D) and is suitable for both left and right turning gates. The adjustable speed and final snap feature allow for customized closing settings, ensuring the gate closes smoothly and securely every time. With a maximum opening force of 20 Nm, the gate remains easy to open while offering robust closing capabilities. Durability and Protection The RHINO gate closer's anodized aluminium housing provides excellent resistance to scratches and corrosion, ensuring it remains functional and visually appealing over time. The hydraulic mechanism is designed to operate smoothly in various weather conditions, maintaining consistent performance regardless of temperature fluctuations. This combination of durability and adaptability makes the RHINO gate closer a reliable choice for all gate applications.

LOCINOX LION | Compact Hydraulic Gate Closer | Fits All Pedestrian Gates

Product Overview The LION Compact Hydraulic Gate Closer is a versatile and aesthetically pleasing solution designed for all pedestrian gates. Its compact design and anodized aluminum housing provide a durable, scratch-resistant, and corrosion-free finish. The LION gate closer is unique with its flexibility, including both 90° and 180° railsets in the package, making it adaptable to various gate situations. The hydraulic mechanism ensures smooth and reliable operation, unaffected by temperature changes, while the Quick-Fix system allows for easy and fast mounting. Key Features Automatic 180° closing with adjustable closing speed and final snap Railset included for 90° and 180° situations Scratch-resistant and corrosion-free anodized aluminum housing Compact and aesthetic design Closing speed unaffected by temperature changes Suitable for left and right turning gates Integrated pre-tension for extremely smooth installation Easy and fast mounting with Quick-Fix Easy to open with a maximum of 16 Nm Product Description The LION Compact Hydraulic Gate Closer is an all-round solution for pedestrian gates, offering flexibility and durability in one compact package. Its anodized aluminum housing not only looks attractive but also ensures long-lasting performance without scratches or corrosion. The included railsets for 90° and 180° gate situations make it adaptable to various installations, while the hydraulic mechanism guarantees smooth closing unaffected by temperature changes. Installation and Usage Installing the LION gate closer is simple and efficient with the Quick-Fix system, allowing for quick mounting on new or existing gates. The integrated pre-tension feature ensures an extremely smooth installation process. Suitable for both left and right turning gates, the LION gate closer provides adjustable closing speed and final snap, catering to different user preferences and gate requirements. With a maximum opening force of 16 Nm, it offers ease of use while maintaining robust closing capabilities. Durability and Protection The LION gate closer's anodized aluminum housing provides excellent resistance to scratches and corrosion, ensuring it remains functional and visually appealing over time. The hydraulic mechanism is designed to operate smoothly in various weather conditions, maintaining consistent performance regardless of temperature fluctuations. This combination of durability and adaptability makes the LION gate closer a reliable choice for all pedestrian gate applications.

LOCINOX MAMMOTH-HD | 180° Hydraulic Gate Closer and Hinge-in-One | Heavy Duty

Product Overview The MAMMOTH-HD is a highly powerful hydraulic 180° gate closer and hinge-in-one, designed to close the heaviest gates with ease. This heavy-duty gate closer combines the hydraulically damped Mammoth with the powerful self-closing Raptor hinge, making it the ideal solution for gates up to 200 kg and 2000 mm wide. Equipped with double bearings, both hinges guarantee extremely smooth functioning. The Active Thermal System ensures a constant closing speed, unaffected by weather conditions. The Raptor hinge is included in this set. Key Features 180° hydraulic gate closer with adjustable speed and final snap Aesthetic design with powder-coated aluminium housing Closing speed unaffected by temperature changes Easy to open with a maximum of 32 Nm Vandal-proof construction Suitable for left and right turning gates Easy mounting with Quick-Fix Product Description The MAMMOTH-HD hydraulic gate closer and hinge-in-one is designed for heavy-duty applications, capable of handling gates up to 200 kg and 2000 mm wide. Its hydraulically damped mechanism ensures smooth and controlled closing, while the powerful self-closing Raptor hinge enhances its functionality. The Active Thermal System maintains a constant closing speed regardless of weather conditions, ensuring reliable performance year-round. Installation and Usage Installing the MAMMOTH-HD is straightforward, thanks to the Quick-Fix system. The gate closer is suitable for both left and right turning gates, providing versatility in various installations. The adjustable speed and final snap feature allow for customized closing settings, ensuring the gate closes smoothly and securely every time. With a maximum opening force of 32 Nm, the gate remains easy to open while offering robust closing capabilities. Durability and Protection Constructed with a powder-coated aluminium housing, the MAMMOTH-HD is built to withstand harsh environmental conditions. Its vandal-proof design adds an extra layer of security, making it suitable for high-traffic and public areas. The double bearings in the hinges ensure long-lasting smooth operation, while the Active Thermal System guarantees consistent performance regardless of temperature fluctuations.

LOCINOX INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit)

INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit) The invisible Interio gate closer, with matching hinge set, is completely built into the gate frame. This highly aesthetic solution opens and closes the gate comfortably. The integrated pre-tension ensures an efficient and flawless installation where speed and final snap can be adjusted accurately to fit any need. A constant closing speed is guaranteed in all weather conditions, without any adjustments needed. Interio is perfectly suited for both left and right turning gates. Is available on it's own or with ground or wall mounting kit.   SPECIFICATIONS Self-closing up to 125° (depending on the situation) with adjustable closing speed and final snap Powder coated aluminium housing Constant closing speed in hot or cold weather Vandal-proof For left & right turning gates Available for 50 and 60 mm profiles with max 2 mm thickness Secure, fast and easy attachment thanks to Quick-Fix mounting bolts Optional sets available for ground and wall installation Recommended with Gatestop Easy to open: Max. 20 Nm DRAWING

LOCINOX PUSHBAR Aluminium Push Bar | 1400mm Length | Easy Gate Exit

Product Overview The Aluminium PUSHBAR is designed to facilitate easy opening and free exit of a gate with a simple push. This 1400mm length push bar replaces the standard handle, operates the daybolt, and can be quickly installed on new or existing Locinox surface-mounted gate locks (LA, LP, and LF chassis - PUSHBAR-L-1400) or hybrid insert locks (PUSHBAR-H-1400). The PUSHBAR is versatile and can be shortened to fit any gate. Key Features Black powder-coated aluminium push bar with stainless steel mechanism Available in 1400mm length, can be shortened to fit any gate Easy installation with Quick-Fix Compatible with Locinox surface-mounted gate locks (LA, LP, LF) and hybrid insert locks (H-Metal, H-Wood, Sixtylock) Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Suitable for left and right turning gates Product Description The PUSHBAR aluminium push bar is an excellent solution for ensuring a quick and simple gate exit. Its 1400mm length offers flexibility as it can be shortened to fit any gate size. The black powder-coated aluminium finish with a stainless steel mechanism ensures durability and a sleek appearance. The PUSHBAR is compatible with a wide range of Locinox gate locks, making it a versatile addition to any gate setup. Specifications (PUSHBAR-L-1400) Black powder-coated aluminium push bar with stainless steel mechanism For left and right turning gates Easy to install on the gate with Quick-Fix Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Specifications (PUSHBAR-H-1400) Black powder-coated aluminium push bar with stainless steel mechanism Only compatible with H-Metal, H-Wood, and Sixtylock Easy & fast mounting: Quick-Fix For left and right turning gates Blinded 8 mm follower included Possible to combine with half handle sets with 8 mm follower Installation and Usage Installing the PUSHBAR is straightforward with the Quick-Fix system, allowing for easy mounting on both new and existing gates. The push bar is suitable for left and right turning gates, providing flexibility in installation. The blinded 8 mm follower ensures a secure fit, and the push bar can be combined with half handle sets with an 8 mm follower for enhanced functionality. Durability and Protection The black powder-coated aluminium construction of the PUSHBAR ensures resistance to weather and wear, making it suitable for outdoor use. The stainless steel mechanism adds to its durability, ensuring long-lasting performance. This robust design guarantees reliable operation and easy gate access for years to come.

Locinox LGKZ D1 | Double Cylinder Gate Lock | Sliding Gates

Product Overview The Locinox LGKZ D1 - Double Cylinder Gate Lock is an industrial-grade lock designed specifically for sliding gates. Featuring a robust aluminum housing and a durable stainless steel mechanism, this lock provides high security and reliability. It is equipped with two cylinders, allowing the lock to be opened or closed using either cylinder. This feature makes it ideal for granting access to third parties such as firemen or waste collectors. Key Features Double cylinder gate lock for sliding gates Aluminum housing with stainless steel mechanism Can be operated using either of the two cylinders ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Compatible with gate profiles from 40 to 120 mm depth Adjustable for horizontal or vertical mounting of the keep (catch bolt) Innovative closing system Stainless steel collar around the Twistfinger prevents cutting through the Twistfinger (catchbolt) 3-hole fixing with two hexagon socket head screws Exchangeable with Locinox LS-Locks Standard with reinforced aluminum handle pair Product Description The Locinox LGKZ D1 Double Cylinder Gate Lock offers robust security for industrial sliding gates. Its aluminum housing and stainless steel mechanism ensure durability and longevity, while the dual cylinder design provides versatile access control. The lock's innovative closing system and adjustable mounting options make it suitable for a variety of gate installations. Additionally, the stainless steel collar around the Twistfinger enhances the lock's resistance to tampering and cutting, ensuring maximum security. Specifications Lock Box: ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Gate Profiles: For profiles from 40 to 120 mm depth Mechanism and Twistfinger: Stainless steel Mounting: Adjustable for horizontal or vertical mounting of the keep (catch bolt) Closing System: Innovative design Twistfinger Collar: Stainless steel collar prevents cutting through the Twistfinger (catchbolt) Fixing: 3-hole fixing with two hexagon socket head screws Compatibility: Exchangeable with Locinox LS-Locks Handle: Standard with reinforced aluminum handle pair Installation and Usage Installing the Locinox LGKZ D1 is straightforward, with adjustable options for both horizontal and vertical mounting of the keep (catch bolt). The lock is compatible with gate profiles ranging from 40 to 120 mm in depth. The 3-hole fixing system, along with two hexagon socket head screws, ensures a secure installation. The lock can be operated using either of the two cylinders, making it convenient for authorized third parties to gain access when necessary. Durability and Protection The lock box is ISO 9227 KTL / E-coated, providing resistance to corrosion and ensuring durability even in harsh environmental conditions. The stainless steel mechanism and Twistfinger further enhance the lock's robustness. The innovative closing system and the anti-cutting stainless steel collar around the Twistfinger offer additional security against tampering and unauthorized access.

Locinox LLKZ V2 | LEONARDO Mechanical Code Lock | Sliding Gates

Product Overview The Locinox LLKZ V2 - LEONARDO is a premium mechanical code lock specifically designed for sliding gates. With its aluminum housing and stainless steel mechanism, this lock offers durability and reliable performance. The system requires no electricity or batteries, allowing for easy and quick installation on any sliding gate. The unique Twistfinger and self-correcting keep ensure perfect alignment and secure closing of your gate. Key Features 100% mechanical: no battery or electricity required Adjustable for horizontal or vertical mounting of the keep (catch bolt) Mechanical code panel on both sides Possibility to work with different entrance and exit codes Equipped with dust and rain covers Easy and fast set-up or modification of the access codes Possibility of setting up 4 to 6 digit codes Extremely strong and user-friendly mechanism Automatic code reset after pushing the handle Anti-code detection with integrated security press plate Stainless steel collar around the Twistfinger prevents cutting through the Twistfinger (catchbolt) Product Description The Locinox LLKZ V2 - LEONARDO Mechanical Code Lock offers a robust and efficient solution for securing sliding gates. Its aluminum housing and stainless steel mechanism ensure long-lasting durability, while the mechanical operation means no dependency on batteries or electricity. The Twistfinger and self-correcting keep provide seamless alignment and secure locking every time. Installation and Usage Installing the Locinox LLKZ V2 is straightforward, especially with the recommended Drill-Fix drilling caliber for precise installation. The lock is adjustable for both horizontal and vertical mounting, making it versatile for different gate designs. The mechanical code panel on both sides allows for different entrance and exit codes, enhancing security and convenience. Durability and Protection The lock is equipped with dust and rain covers, ensuring reliable performance in various weather conditions. The stainless steel collar around the Twistfinger offers additional protection against tampering, making the lock extremely strong and secure. The anti-code detection feature with an integrated security press plate adds an extra layer of security.

Locinox LIKQ U2 | Surface Mounted Electric Gate Lock (FAIL CLOSE)

Product Overview The Locinox LIKQ U2 is a high-quality surface-mounted electric gate lock designed for secure access control. Featuring an aluminum housing and a stainless steel mechanism, this lock ensures durability and reliability. The fail close function ensures that the lock is closed when power is interrupted, providing enhanced security. The 20 mm continuous adjustability of the bolts allows perfect latching and locking, while the solid stainless steel deadbolt with a 23 mm throw guarantees secure closure. Key Features High-quality electric gate lock with aluminum housing Stainless steel mechanism Fail Close: Lock is closed when power is interrupted Handles are blocked when there is no power 20 mm continuous adjustability of the bolts for perfect latching/locking Solid stainless steel deadbolt with a 23 mm throw ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Easy left or right changing of the self-latching daybolt Key-operated self-latching bolt Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box 4-hole fixing with two hexagon socket head screws Interchangeable with all Locinox locks Voltage: 12V AC/DC Current: 0.3A Product Description Specifications FeatureDetails Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Fail Close Lock is closed when power is interrupted Handle Function Blocking or releasing of the handles Daybolt Adjustment Easy left or right changing of the self-latching daybolt Deadbolt Throw 23 mm throw of the deadbolt, in 1 turn of the key Self-Latching Bolt Key-operated self-latching bolt Daybolt Adjustment Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box Fixing 4-hole fixing with two hexagon socket head screws Interchangeability Interchangeable with all Locinox locks Voltage 12V AC/DC Current 0.3A Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on the desired gate profiles. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The LIKQ U2 lock is designed for easy operation. The lock will remain closed when power is interrupted, ensuring enhanced security. Adjust the self-latching daybolt as needed for left or right operation. The key-operated self-latching bolt and continuous adjustment of the daybolt ensure secure and reliable locking. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached.

Locinox LEKQ U4 | Surface Mounted Electric Gate Lock (FAIL OPEN)

Product Overview The Locinox LEKQ U4 is a high-quality surface-mounted electric gate lock designed for secure access control. Featuring an aluminum housing and a stainless steel mechanism, this lock ensures durability and reliability. The fail open function ensures that the lock is open when power is interrupted, providing safety in emergency situations. The 20 mm continuous adjustability of the bolts allows perfect latching and locking, while the solid stainless steel deadbolt with a 23 mm throw guarantees secure locking. Key Features High-quality electric gate lock with aluminum housing Stainless steel mechanism Fail Open: Lock is open when power is interrupted Handles are blocked when the lock is powered 20 mm continuous adjustability of the bolts for perfect latching/locking Solid stainless steel deadbolt with a 23 mm throw ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Easy left or right changing of the self-latching daybolt Key-operated self-latching bolt Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box 4-hole fixing with two hexagon socket head screws Interchangeable with all Locinox locks Voltage: 12V AC/DC Current: 0.3A Product Description Specifications FeatureDetails Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Fail Open Lock is open when power is interrupted Handle Function Blocking or releasing of the handles Daybolt Adjustment Easy left or right changing of the self-latching daybolt Deadbolt Throw 23 mm throw of the deadbolt, in 1 turn of the key Self-Latching Bolt Key-operated self-latching bolt Daybolt Adjustment Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box Fixing 4-hole fixing with two hexagon socket head screws Interchangeability Interchangeable with all Locinox locks Voltage 12V AC/DC Current 0.3A Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on the desired gate profiles. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The LEKQ U4 lock is designed for easy operation. The lock will remain open when power is interrupted, ensuring safety in emergencies. Adjust the self-latching daybolt as needed for left or right operation. The key-operated self-latching bolt and continuous adjustment of the daybolt ensure secure and reliable locking. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached.

Locinox VALENTINO | Surface Mounted Battery Powered Code Lock

Product Overview The Locinox VALENTINO is a high-quality surface-mounted electronic code lock that operates on batteries. Featuring an aluminum housing, this lock is designed for durability and energy efficiency, making it an ideal solution for gate access control with minimal maintenance. Pincodes can be easily added, modified, or removed, and the 20 mm continuous adjustability of the bolts ensures perfect latching and locking. Key Features Battery powered electronic code lock with aluminum housing Energy efficient design with up to 150,000 open/close cycles on the same set of batteries ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Weather protected illuminated electronic code panel on both sides Extremely strong and vandal proof design Easy and fast set-up or modification of the access codes Low battery warning light Supports free-exit, pushbar, and code controlled handles Key-operated unlocking and programming functionality Supports permanently open codes Different entrance and exit codes possible Complies with IP68 - Extremely resistant to water and dust Product Description Specifications FeatureDetails Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Code Panel Weather protected illuminated electronic code panel on both sides Energy Efficiency Up to 150,000 open/close cycles on the same set of batteries Power Source Operates on batteries, battery pack included Setup Easy and fast set-up or modification of the access codes Low Battery Warning Low battery warning light Access Support Supports free-exit, pushbar, and code controlled handles Unlocking and Programming Key-operated unlocking and programming functionality Code Options Supports permanently open codes, different entrance and exit codes Durability Complies with IP68 - Extremely resistant to water and dust Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on the desired gate profiles. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The VALENTINO lock is designed for easy operation. Set up or modify the access codes quickly and securely. The lock features automatic code reset after the handle is pushed, enhancing security and ease of use. The low battery warning light ensures timely battery replacements. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached. Replace batteries as needed and watch for the low battery warning light.

LOCINOX LFKQ X1 - FREE VINCI Single Sided Mechanical Code Lock

Product Overview The Locinox LFKQ X1 - FREE VINCI is a superb single-sided mechanical code lock designed for gates that require secured entrance and free exit. This lock features an aluminum housing and a stainless steel mechanism, ensuring durability and reliability. It operates without batteries or electricity, making it an easy and efficient solution for access control on ornamental and chain link gates. The 20 mm continuous adjustability of the bolt allows perfect latching and locking. Key Features Single-sided mechanical code lock with aluminum housing Stainless steel mechanism Secured entrance with code, free exit No batteries or electricity required 20 mm continuous adjustability of the bolt for perfect latching/locking ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Code panel with stainless steel push buttons on one side Polyamide rain and dust cover Easy and fast set-up or modification of the access codes Adjustable rollerbolt for easy closing Extremely strong and user-friendly mechanism Automatic code reset after pushing the handle Anti-code detection with integrated security press plate Interchangeable with all Locinox locks Product Description Specifications FeatureDetails Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Access Control Entrance secured by code, free exit Code Panel Stainless steel push buttons on one side Cover Polyamide rain and dust cover Set-Up Easy and fast set-up or modification of the access codes Rollerbolt Adjustable rollerbolt for easy closing Mechanism Extremely strong and user-friendly mechanism Code Reset Automatic code reset after pushing the handle Security Anti-code detection with integrated security press plate Compatibility Interchangeable with all Locinox locks Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on the desired gate profiles. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The LFKQ X1 lock is designed for easy operation. Set up or modify the access codes quickly and securely. Use the mechanical code panel on the entrance side for access control, while the exit remains free. The lock features automatic code reset after the handle is pushed, enhancing security and ease of use. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached.

Locinox LMKQ V2 | VINCI Surface Mounted Mechanical Code Lock

Product Overview The Locinox LMKQ V2 - VINCI is a high-quality surface-mounted mechanical code lock designed for easy and secure access control on gates. This lock features an aluminum housing and a stainless steel mechanism, requiring no batteries or electricity, making it a convenient solution for any gate. The 20 mm continuous adjustability of the bolts ensures perfect latching and locking, while the solid stainless steel deadbolt with a 23 mm throw provides secure locking. Key Features High-quality mechanical code lock with aluminum housing Stainless steel mechanism No batteries or electricity required 20 mm continuous adjustability of the bolts for perfect latching/locking Solid stainless steel deadbolt with a 23 mm throw ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Mechanical code panel on both sides Different entrance and exit codes possible Polyamide rain and dust cover Easy and fast set-up or modification of the access codes Adjustable rollerbolt for easy closing Extremely strong and user-friendly mechanism Automatic code reset after pushing the handle Anti-code detection with integrated security press plate Interchangeable with all Locinox locks EN179 certified configuration available Panic function E / Switch function Product Description Specifications FeatureDetails Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Panels Mechanical code panel on both sides Codes Different entrance and exit codes possible Cover Polyamide rain and dust cover Set-Up Easy and fast set-up or modification of the access codes Rollerbolt Adjustable rollerbolt for easy closing Mechanism Extremely strong and user-friendly mechanism Code Reset Automatic code reset after pushing the handle Security Anti-code detection with integrated security press plate Compatibility Interchangeable with all Locinox locks Certification EN179 certified configuration available Function Panic function E / Switch function Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on the desired gate profiles. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The LMKQ V2 lock is designed for easy operation. Set up or modify the access codes quickly and securely. Use the mechanical code panel on both sides for access control. The lock features automatic code reset after the handle is pushed, enhancing security and ease of use. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached.

LOCINOX 3019LA - Adaptor plate for LA, LM and LS locks - For round Ø 34 mm profiles

3019LA - Adaptor plate for LA, LM and LS locks - For round Ø 34 mm profiles The adaptor plate is mounted between the lock and gate frame. Aluminium adaptor plate for LA & LS locks Adaptor plate => Ø34 mm DRAWING

LOCINOX LDKZ D1 | Double Cylinder Gate Lock | Swing Gates | Surface Mounted

Product Overview The LDKZ D1 is a high-quality surface-mounted double cylinder gate lock designed for swing gates. Featuring a robust aluminum housing and a durable stainless steel mechanism, this lock provides secure and reliable access control. The lock is ideal for granting entry to third parties such as firemen or waste collectors, as it can be operated using either of the two cylinders. Key Features Surface-mounted double cylinder gate lock for swing gates High-quality aluminum housing Stainless steel mechanism with 2 cylinders Operable with either cylinder for convenience Solid stainless steel night bolt with double locking for secure closing ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Compatible with gate profiles from 10 to 100 mm Non-adjustable day and night bolt Easy left or right changing of the self-latching daybolt Double throw of the night bolt: 23 mm Key-operated self-latching bolt 4-hole fixing with two hexagon socket head screws Interchangeable with all Locinox locks Product Description Specifications FeatureDetails Material Stainless steel mechanism with aluminum housing Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Compatibility Gate profiles from 10 to 100 mm Night Bolt Double throw of 23 mm Fixing 4-hole fixing with two hexagon socket head screws Adjustability Non-adjustable day and night bolt Tested Movements Up to 500,000 Function Panic function E / Switch function Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. Ensure the lock is installed correctly on gate profiles ranging from 10 to 100 mm. If installing on a round profile, a Round Profile Adaptor Plate for Locinox Locks is required. Usage Instructions The LDKZ D1 lock is designed for easy operation. Use either of the cylinders to open or close the lock. Adjust the self-latching daybolt as needed for left or right operation. Ensure the night bolt is securely locked for maximum security. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. Refer to the provided drawings for detailed dimensions and profile variables. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety. For round profile installations, ensure the Round Profile Adaptor Plate is securely attached.

Locinox LPKQ U2 | Surface Mounted Anti-Panic Gate Lock | Stainless Steel

Product Overview The Locinox LPKQ U2 is a superior surface-mounted anti-panic gate lock made from stainless steel with an aluminum housing. It is designed for use on 40 & 60 mm gate frames and ensures safe and secure locking while providing easy escape or exit from the inside by operating the handle. The lock is EN179 certified, making it suitable for emergency exit applications. Mechanical access from the outside is always possible by operating the cylinder. Key Features Stainless steel superior anti-panic lock with aluminum housing EN179 certified configuration possible 20 mm continuous adjustability of the bolts for perfect latching/locking Solid stainless steel deadbolt with a 23 mm throw ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Easy left or right changing of the self-latching daybolt Key-operated self-latching bolt 4-hole fixing with two hexagon socket head screws 60 mm center distance of the bolts Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box Tested up to 500,000 movements Panic function E / Switch function Product Description Specifications FeatureDetails Material Stainless steel mechanism with aluminum housing Coating ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Deadbolt Throw 23 mm Fixing 4-hole fixing with two hexagon socket head screws Center Distance 60 mm between bolts Adjustability Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box Tested Movements Up to 500,000 Certification EN179 Function Panic function E / Switch function Installation For a fast and highly precise installation, it is recommended to use the Drill-Fix drilling jig. The lock can be easily installed on 40 & 60 mm gate frames, ensuring a secure and reliable fit. Usage Instructions The LPKQ U2 lock is designed for easy operation. To exit from the inside, simply operate the handle. Mechanical access from the outside is possible by using the key cylinder. Adjust the bolts as needed for perfect latching and locking. Dimensions and Color Availability The lock is available in various RAL colors to match different gate styles and preferences. The drawing and installation movies provide detailed visual guidance for installation and usage. Safety and Maintenance Regularly check the lock mechanism for optimal performance. Ensure that the bolts and the lock box are free from debris and obstructions. Periodically test the lock's functionality to maintain its reliability and safety.

NICE BiDi-Shutter | Interior Bidirectional Interface for Tubular Motors

 Product Overview The BiDi-Shutter is an advanced bidirectional interface designed for integrating mechanical tubular motors of interior shutters and outdoor awnings into your smart home system. This interface allows for individual, group, or scenario control of connected motors, providing real-time feedback on automation status and efficient energy management to reduce waste. The BiDi-Shutter enhances comfort by protecting indoor environments from excessive sunlight and reducing the need for air conditioning. Key Features Control connected motors individually, in groups, or in scenarios Receive real-time feedback on automation status Manage electrical loads and reduce energy waste Voice control via Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment using Yubii or MyNice apps Enhance indoor comfort by protecting against heat and reducing air conditioning use Fast programming of limit switches and continuous automatic calibration Set two intermediate opening positions based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors No gateway required for controlling Venetian blinds, rolling shutters, and awnings Each bidirectional product acts as a radio signal repeater to extend signal coverage Product Description Smart Home Integration BiDi-Shutter allows seamless integration of tubular motors into your smart home system, enabling comprehensive control and management. You can control the connected motors using voice commands through Amazon Alexa, Google Home, or Siri Shortcuts. Additionally, the Yubii and MyNice apps provide remote management capabilities via your smartphone, smartwatch, or car infotainment system. Energy Efficiency and Comfort By managing electrical loads and controlling consumption, BiDi-Shutter helps reduce energy waste. It also protects your indoor environment from excessive heat, making the climate more comfortable and minimizing the need for air conditioning. This contributes to energy savings and enhances overall comfort. Easy Programming and Compatibility Programming the limit switches is fast and straightforward, requiring just two complete maneuvers. The system ensures continuous automatic calibration during operation. You can set two intermediate opening positions based on sun sensor settings, allowing for optimal sunlight control. BiDi-Shutter is compatible with both unidirectional and bidirectional remote controls and climate sensors, offering flexibility in control options. Reliable and Efficient Each bidirectional product in the BiDi-Shutter system acts as a radio signal repeater, extending signal coverage and ensuring reliable operation. This makes the system efficient and effective in controlling various types of window coverings, including Venetian blinds, rolling shutters, and awnings, without the need for a separate gateway. Usage Instructions Install the BiDi-Shutter interface according to the provided manual. Pair the interface with your smart home system and configure the settings using the Yubii or MyNice apps. Set the desired opening positions and control the tubular motors using voice commands or remote controls. Regularly check the system for updates and ensure all components are functioning correctly. Dimensions Compact and designed for easy installation, the BiDi-Shutter interface fits seamlessly into your existing smart home setup. Safety and Maintenance Ensure the BiDi-Shutter interface is installed in a suitable location, protected from moisture and excessive heat. Regularly check for firmware updates to maintain optimal performance. Keep the interface and connected devices clean and free from obstructions.

PROCON ELECTRONICS MD360 Wireless Magnetic Field Vehicle Detector | Controller and Puck | 433MHz

Product Overview The MD360 Wireless Magnetic Field Vehicle Detector is a sophisticated solution designed for parking and access control applications. This system includes a 433MHz wireless magnetic field vehicle detector puck (MD360P) and controller (MD360C), providing a cost-effective and efficient method for detecting vehicles to facilitate the automatic opening of security gates. With minimal road surface cutting required for installation, the MD360 series ensures a hassle-free setup. Key Features Wireless connectivity with up to 50 meters range (Line of Sight) Up to 5 years battery life for the puck at 25℃ (Calculated at 1 detection per minute) Easy pairing of puck to controller (Note: Only one puck can be paired to a controller at one time) 1.5m sensing range for the puck (Optimal detection achieved when mounted as close to the vehicle path as possible) Power supply: 12 - 24VAC/DC 50/60Hz Relay Mode: Configure the relay to operate in presence or pulse mode Pulse Relay Selection: Configure relay to pulse on vehicle detect or undetect Product Description Models CodeDescription MD360C Controller for MD360 Wireless Magnetic Field Vehicle Detector MD360P Puck for MD360 Wireless Magnetic Field Vehicle Detector Technical Specifications SpecificationDetails Frequency 433MHz Wireless Range Up to 50 meters (Line of Sight) Battery Life Up to 5 years at 25℃ (1 detect per minute) Sensing Range 1.5 meters Power Supply 12 - 24VAC/DC 50/60Hz Relay Mode Presence or Pulse Pulse Relay Selection Vehicle detect or undetect Usage Instructions To install the MD360 vehicle detector, follow the provided instructions for minimal road surface cutting. Place the puck as close to the vehicle path as possible for optimal detection. Pair the puck with the controller easily, ensuring only one puck is paired at a time. Configure the relay mode and pulse relay selection according to your requirements for efficient vehicle detection and gate operation. Dimensions Compact design for easy installation and seamless integration with existing access control systems. Safety and Maintenance Ensure the detector puck and controller are installed in a suitable location free from obstructions. Regularly check the battery life and replace as needed to maintain optimal performance. The robust design of the MD360 series ensures long-lasting durability in various environmental conditions.

KEY AUTOMATION SUB 10 Black Remote Kit KSUB44-R | XR Rolling Code 433 MHz

 Product Overview The SUB 10 Black Remote Kit includes 10 high-quality transmitters featuring XR rolling code technology at 433 MHz frequency. These remotes are designed with a water-resistant, ergonomic, and modern design, ensuring reliable performance and ease of use. The remotes are made with valuable materials and detailed finishes thanks to the new generation tri-injection molding process, including a metal chromed insert and different interchangeable colors. Key Features Water-resistant design (IP67) Ergonomic, simple, and modern design Valuable materials with tri-injection molding process Metal chromed insert Different interchangeable colors 4 channels XR rolling code 433 MHz frequency Product Description Models CodeDescription KSUB44-R Kit of 10 SUB transmitters XR rolling code black Technical Features Voltage: 3 Vdc Appliance Isolation Class: III Battery: CR2032 Radio Frequency: 433.92 MHz Degree of Protection: IP67 Weight: 0.036 kg Minimum Operating Temperature: -10°C Maximum Operating Temperature: +55°C Usage Instructions The SUB 10 Remote Kit is easy to program and use. Follow the instructions provided with the kit to pair the remotes with your specific gate or automation system. Ensure the remotes are within range and the system is set to receive new remote signals during the pairing process. Dimensions The compact design of the SUB remotes makes them easy to carry and use. Safety and Maintenance Keep the remotes clean and free from dust. The water-resistant casing helps protect the remotes from water damage, but avoid submerging them in water. Replace the batteries as needed to maintain optimal performance.

KEY AUTOMATION DYL Programming module (only 14A board)

DYL Programming module (only 14A board) Cable length 120 cm  

KEY AUTOMATION KUBE PRO Module | Smartphone Programming | Bluetooth 4.2 LE

Product Overview The KUBE PRO module is a professional-grade tool designed for configuring doors and gates directly from a smartphone. Tailored for professional installers, the KUBE PRO module simplifies the setup and management of automation systems with its dedicated app. It features the KEY CLOUD service for viewing and backing up data, managing your team, and planning scheduled maintenance. Key Features App designed for professional installers for configuring doors and gates KEY CLOUD service for data backup, team management, and maintenance planning Compatible with 14A control unit from 3.0 FW version, HALO, and CT10324-CT20324 control units from 2.0 FW version Wireless Bluetooth technology 4.2 LE Easy and fast configuration App native for Android 5.0/iOS 9.3.5 or superior with multilingual support Compatible with smartphones equipped with Bluetooth 4.0 LE Product Description Models CodeDescription KUBE Module for automation control from smartphone, for 14A, HALO, CT10324, and CT20324 KUBEPRO Module for smartphone programming, for 14A, HALO, CT10324, and CT20324 Technical Specifications SpecificationDetails Wireless Technology Bluetooth 4.2 LE App Compatibility Android 5.0/iOS 9.3.5 or superior Control Unit Compatibility 14A from 3.0 FW, HALO, CT10324, CT20324 from 2.0 FW Smartphone Compatibility Android and Apple devices with Bluetooth 4.0 LE Usage Instructions The KUBE PRO module is designed for easy installation and configuration. Follow the instructions provided in the app to pair your smartphone with the KUBE PRO module. Once paired, you can configure doors and gates, manage team access, and plan maintenance schedules effortlessly through the app. Ensure your control units are compatible and updated to the required firmware versions. Dimensions Compact design for easy integration with your existing automation system.

KEY AUTOMATION KUBE Module | Automation Control from Smartphone | Bluetooth 4.2 LE

Product Overview The KUBE module is a cutting-edge solution for automation control directly from your smartphone. Designed with the end customer in mind, the KUBE module allows for easy and intuitive control of gates, garden lights, and user access management through a dedicated app. This app synchronizes the status of your automation system with the Cloud and the Kube Pro installer app, ensuring seamless operation and monitoring. Key Features Control gates and garden lights from your smartphone Manage other users’ access from the main smartphone Synchronization with Cloud and Kube Pro installer app Compatible with 14A control unit from 3.0 FW version, HALO and CT10324-CT20324 control units from 2.0 FW version Wireless Bluetooth technology 4.2 LE Easy and fast configuration App native for Android 5.0/iOS 9.3.5 or superior with multilingual support Compatible with smartphones equipped with Bluetooth 4.0 LE Product Description Models CodeDescription KUBE Module for automation control from smartphone, for 14A, HALO, CT10324, and CT20324 KUBEPRO Module for smartphone programming, for 14A, HALO, CT10324, and CT20324 Technical Specifications SpecificationDetails Wireless Technology Bluetooth 4.2 LE App Compatibility Android 5.0/iOS 9.3.5 or superior Control Unit Compatibility 14A from 3.0 FW, HALO, CT10324, CT20324 from 2.0 FW Smartphone Compatibility Android and Apple devices with Bluetooth 4.0 LE Usage Instructions The KUBE module is designed for easy installation and configuration. Follow the instructions provided in the app to pair your smartphone with the KUBE module. Once paired, you can control your gates, garden lights, and manage user access effortlessly through the app. Ensure your control units are compatible and updated to the required firmware versions. Dimensions Compact design for easy integration with your existing automation system.

KEY AUTOMATION SUB Remote SUB44 | 4 Button Remote | Water Resistant (433 MHz)

Product Overview The SUB44R is a versatile 4 button remote control designed for reliable and secure operation. Featuring a black, water-resistant casing and an ergonomic design, this remote operates on a 433 MHz frequency, making it suitable for various gate and automation systems. The new generation tri-injection molding process ensures valuable materials and tidy details, complemented by a metal chromed insert and interchangeable color options. Key Features 4 button remote control Water-resistant casing (IP67) Ergonomic, simple, and modern design Valuable materials and tidy details with tri-injection molding process Metal chromed insert Interchangeable color options Product Description Models CodeDescription SUB44R 4 channels, black color, XR rolling code 433 MHz, water resistant SUB44F 4 channels, black color, 433 MHz rolling code copier, with on-board receiver, water resistant SUB-44N 4 channels, 433 MHz fixed code copier, water resistant, black color   The colour of the LED light is related to the version. Remote controls of different versions are not compatible. If the LED light is RED then the correct model is KEY SUB-44F If the LED light is BLUE, then the correct model is the KEY SUB-44R If the LED light is GREEN, the correct model is KEY SUB-44N. Technical Features SpecificationDetails Voltage 3 Vdc Appliance Isolation Class III Battery CR2032 Radio Frequency 433.92 MHz Degree of Protection IP67 Weight 0.036 kg Operating Temperature -10°C to +55°C Did You Know? There are three families of SUB transmitters: SUB R: A 4-channel rolling code transmitter. SUB F: Allows installation of a new transmitter without accessing the receiver. If you have a SUB R transmitter already programmed, you can authorize a new SUB F transmitter remotely. The system only works with Key transmitters and receivers. SUB N: Learns the code of fixed code transmitters, including those of other manufacturers.    

KEY AUTOMATION 14A Control Board | Control Units for 24V Automation Systems

Product Overview The 14A Control Board is a state-of-the-art control unit designed to manage all 24V automation systems efficiently. This unit features the NIGHT LIGHT SYSTEM, allowing for automatic control of LED lights during night hours. It requires either a DYL display or the KUBE PRO wireless module for programming. The 14A control board supports up to 20 additional LED lights, providing an economical and automated lighting solution for your entrance during the night. Key Features Latest generation control unit for all 24V automation systems NIGHT LIGHT SYSTEM for LED light control during night hours Mandatory DYL display or KUBE PRO wireless module for programming Supports up to 20 additional LED lights Amperometric obstacle detection with run inversion Standard or programmable slowdown in opening and closing Programmable automatic partial closing Separate OPEN-STOP-CLOSE inputs and PP - PARTIAL input Inputs and safety devices LED visualization Optional test for safety edge LED courtesy light output Open gate indicator output Plug-in programmable radio receiver with 4 channels Flashing light output with user indicator Electro lock output Optional battery backup Product Description Models CodeDescription 14AB2 Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA - mandatory for motors RAY4024E, UND24, SN-50-24, SN5024B 14AB2F Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA to be paired with fast line motors MA24 Logic mainboard PO24 Power module 24Vdc 10A BOX250 Box with transformer 250 VA Operator Specifications ModelInput Power [Vac/Hz]Output Power [Vdc]Max Motor Power [W]Max Working Time [sec]Max Pause Time [sec]Obstacle DetectionProtection DegreeDimensions [mm]Working Temperature [°C] 14AB2 / 14AB2F 230/50 24 300 240 900 Yes IP54 222 x 275 x 110 -20 + 55

KEY AUTOMATION EGO Columns EG50, EG100 | Photocells and Selectors | LED Lights

Product Overview The EGO Columns for photocells and selectors are designed to provide reliable and efficient lighting solutions for large areas. Made entirely of aluminum and available in heights of 500 mm and 1000 mm, these columns feature replaceable LED lights to ensure long-lasting performance. The integrated LED lights enhance visibility and security, making them ideal for various applications. Key Features LED lights to illuminate large areas Constructed entirely of aluminum Available heights: 500 mm, 1000 mm Replaceable LED lights Product Description Specifications SpecificationDetails Voltage 24-35 Vdc Color Rendering Index (CRI) >90 Color Temperature 3000K Luminous Flux 450lm - 900lm Protection Degree IP54 Models CodeDescription EG50 Support post h. 50 cm EG50L Support post h. 50 cm with integrated LED light (5W LED) EG100 Support post h. 100 cm EG100L Support post h. 100 cm with integrated LED light (10W LED) EG100A Support post h. 100 cm with accessory housing EG100LA Support post h. 100 cm with integrated LED light (10W LED) and accessory housing Additional Components CTLIGHT2: Voltage regulator for LED lights 24 Vdc, max 30W (mandatory for all control units except BOXLED control units) Dimensions Height: 500 mm or 1000 mm Usage Limits The performance values can be affected by environmental conditions and the installation setup.

KEY AUTOMATION FT Outdoor Photocells

Key Automation FT Pair of outdoor photocells (FT23, FT33, FT43, FT43B) FEATURES New logic circuit with improved performance Snow function: photocell activates an adaptatively temporized mode, in case of frequent dimming or darkening, to avoid false obstacle detection Two programmable ranges   TECHNICAL SPECIFICATION   FT33 FT23 FT43 FT43B ELECTRICAL DATA Power [Vac] 10-30 Power [Vdc] 10-40 Range [m] 25 30 Consumption rx [A] 27 35  Consumption tx [A] 10 0,04  Relay contacts max supply [A]  1    GENERIC DATA Protection degree IP54    Dimensions (L - D - H) [mm]  80 - 33 - 88   30 - 26 - 88   38 - 38 - 109   Working temperature [°C] -20 + 55      MODELS   CODE   Description FT23  Pair of photocells for external use for small pillars FT33  Pair of photocells for external use and flush mounting FT43  Pair of photocells for external use adjustable through 180°, for small pillars FT43B  Pair of photocells for external use adjustable through 180°, for small pillars, battery powered      

GENIUS AUTOMATION JA592 - Genius Brain 592 Swing Gate Panel c/w lock and limits - 230v

JA592 - Genius AUTOMATION Brain 592 Swing Gate Panel c/w lock and limits - 230v Brain 592 Brain 592 is a 230v control board for swing gates. Suitable for one or two motors - Simple or complete work times learning with or without slow-downs

GATEMASTER SBQES Select Pro Shroud for Quick Exit Locks - Enhance Security for Your Gates

Product Overview The SBQES Select Pro Shroud for Quick Exit Locks is designed to provide enhanced security for gates equipped with quick exit locks. This shroud restricts access to the push pad from the outside, ensuring that only authorized personnel can operate the gate from the inside. Powder-coated in black, it offers a smart and durable finish that complements any gate design. Key Features Powder-coated in black for a sleek and durable finish. Restricts access to the push pad from the outside of the gate. Specifically designed for the Gatemaster Quick Exit locks, ensuring a perfect fit. Compatible Products SBQEKL - Select Pro Bolt-on Quick Exit Keylatch SBQEDGL - Select Pro Bolt-on Quick Exit Digital Access DGLS - Select Pro Digital Gatelock Single Sided Product Details The SBQES Select Pro Shroud is engineered to enhance the security of gates equipped with quick exit locks. By restricting access to the push pad from the outside, this shroud helps prevent unauthorized entry and ensures that only those inside the gate can easily exit. Specifications Finish: Black powder-coated Material: High-quality, durable steel Dimensions Installation Instructions Align the shroud with the quick exit lock on the gate. Secure the shroud in place using the provided bolts and screws. Ensure the shroud covers the push pad effectively to restrict access from the outside. Maintenance Every 6 months: Inspect the shroud for any signs of wear or damage. Clean the shroud with a mild detergent and water to maintain its appearance. Tighten any loose screws or bolts to ensure the shroud remains securely attached. Video Guide Watch our detailed video guide for step-by-step installation and maintenance tips.

GATEMASTER SBQEDGL Select Pro Bolt-on Quick Exit Digital Access Gate Lock - Fits Up to 60mm Gate Frame

Product Overview The SBQEDGL Select Pro Bolt-on Quick Exit Digital Access Gate Lock is engineered for secure and rapid exits through gates. Designed specifically for metal gates, this robust lock automatically latches shut when the gate is closed. It features a digital keypad for easy access from the outside, making it ideal for communal areas, schools, and high-security applications. Key Features Quick exit design with digital keypad for secure gate access. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Easy installation: Simply drill three holes in the gate frame. Available in left or right-hand versions. 16mm one-piece machined stainless steel latchbolt for enhanced security. Adjustable latchbolt for precise fitting on site. Supplied with bolt guide plate and gate post strike plate. Optional security shroud (SBQES) to prevent access to the pad from the outside (order separately). Product Details Product CodeDescription SBQEDGLL01 To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand SBQEDGLR01 To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand SBQEDGLL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand SBQEDGLR02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolts: Adjustable, latchbolt springs 22mm (7/8"). Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag – fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER SBQEKL Select Pro Bolt-on Quick Exit Gate Lock - Fits Up to 60mm Gate Frame

Product Overview The SBQEKL Select Pro Bolt-on Quick Exit Gate Lock is designed for rapid and secure exits through gates. Specifically crafted for metal gates, this robust lock automatically latches shut when the gate is closed. Perfect for communal, school, and alley gating, ensuring security and convenience. Key Features Quick exit design for rapid gate access. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Easy installation: Simply drill three holes in the gate frame. Available with an optional digital keypad entry from the outside (SBQEDGL). Available in left or right-hand versions. 16mm one-piece machined stainless steel latchbolt. Latchbolt moves 22mm (7/8"). Optional security shroud (SBQES) available to prevent access to the pad from the outside (order separately). Product Details Product CodeDescription SBQEKLL01 To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand SBQEKLR01 To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand SBQEKLL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand SBQEKLR02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolts: Adjustable, latchbolt springs 22mm (7/8"). Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag – fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER DGLS Select Pro Digital Gatelock - Fits Up to 60mm Gate Frame

Product Overview The DGLS Select Pro Digital Gatelock offers a keyless entry solution for gates, perfect for increasing security and convenience. This single-sided digital lock features access via code entry and a simple lever/handle action to exit. Designed with marine grade materials, this lock is built to last and withstand harsh conditions. Key Features Single-sided digital access: Enter the code to unlock, exit with a simple lever/handle action. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Marine grade keypad ensures long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Latchbolt moves 22mm (7/8"). Includes a brushed finish stainless steel bolt support plate with brass bearing to reduce friction and wear, enhancing product life. Strike plate included for smooth operation. Hold-back function allows the gate to remain unlocked for short periods. Product Details Product CodeDescription DGLS01R To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand DGLS01L To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand DGLS02R To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand DGLS02L To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when the gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length and/or change to RH/LH, insert a 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER DGL Select Pro Digital Gatelock Double Sided - Fits Up to 60mm Gate Frame

Product Overview The DGL Select Pro Digital Gatelock is designed for those seeking keyless entry through gates. This double-sided digital lock allows access via code from both sides, ensuring secure and convenient entry. Made with marine grade keypads, it is built for durability and heavy use. The lock automatically latches into the gate frame when the gate closes, and can only be removed when the gate is open, requiring the code. Key Features Double-sided digital access via code from both sides. Auto-latching mechanism: closes the door and latches the latchbolt into the gate frame. Marine grade keypads ensure long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Adjustable latchbolt that moves 22mm (7/8"). Brushed finish stainless steel bolt support plate with brass bearing reduces friction, wear, and increases product life. Includes strike plate. Product Details Product CodeDescription DGL01 To fit 10-30mm (1/2" - 1-1/4") gate frames DGL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length or change to RH/LH, insert 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER SBD Select Pro Bolt-on Deadlock - No Handle - Fits Up to 60mm Gate Frame

Product Overview The SBD Select Pro bolt-on deadlock is a convenient and robust locking solution for various applications. Designed to eliminate the need for padlocks or slide bolts, this deadlock secures gates with a simple turn of the key, extending the stainless steel deadbolt 30mm. It is perfect for heavy use gates in communal areas, schools, and alleys. Key Features Keyed access on both sides. Compatible with both left-hand and right-hand gates. Adjustable deadbolt (up to 27mm) for precise fitting on site. One-piece machined stainless steel locking bolt. Easy installation with only three holes required in the gate frame. 5 pin eurocylinder for enhanced security. Supplied with a bolt support plate featuring a brass bearing to reduce friction and wear, increasing product life. Designed for heavy use gates. 30mm bolt throw for added security. Square case design easily incorporates into various gate designs. Marine grade, salt spray tested for 1000 hours. Product Details Product CodeDescription SBD1601 To fit 10-30mm (1/2" - 1-1/4") gate frames SBD1602 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Deadbolt: Adjustable, moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using the stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill a clearance hole in the keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit the strike plate by either welding or screw fixing it to the gate post. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER SBL Select Pro Bolt-on latch - fits up to 60mm gate frame (modern or traditional handle)

Product Overview The SBL Select Pro bolt-on latch is an ideal solution for gates requiring a simple latching mechanism without locking. This latch is perfect for holding gates shut in housing developments and playgrounds. It features a robust 16mm one-piece machined stainless steel latchbolt, and its installation requires only three holes in the gate. The latch is compatible with the Select Pro range and can be fitted with modern or traditional handles. Key Features 16mm one-piece machined stainless steel latchbolt. Easy installation with only three holes required in the gate. Compatible with most handle types, or handles can be supplied. Adjustable latchbolt for precise fitting on site. Includes strike plate and bolt support plate for smooth latching action. Marine grade, salt spray tested for 1000 hours. Suitable for both left-hand and right-hand gates. Product Details Product codeDescription SBL1601AH To fit 10-30mm (1/2" - 1-1/4") gate frames - modern handle SBL1602AH To fit 40-60mm (1-1/2" - 2-1/4") gate frames - modern handle SBL1601THD To fit 10-30mm (1/2" - 1-1/4") gate frames - traditional handle SBL1602THD To fit 40-60mm (1-1/2" - 2-1/4") gate frames - traditional handle Specifications Marine grade: Salt spray tested for 1000 hours. Bolts: Adjustable, latchbolt springs 13mm (1/2"). Perfect for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit strike plate by either welding or screw fixing it to the gate post. Ensure latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER SBLD Select Pro Bolt-on latch and deadbolt - fits up to 60mm gate frame (modern or traditional handle)

Product Overview The SBLD Select Pro bolt-on latch and deadbolt is designed for gates that require both latching and deadlocking for enhanced security. Its stainless steel latchbolt springs 13mm into the gate post and retracts using the handles, while turning the key moves the bolt 30mm, deadlocking it for added security. This lock is easily adaptable for left or right-hand gates and comes with a bolt support plate and gate post strike plate. Available with modern or traditional handle options. Key Features Keyed access on both sides for added security. Adjustable latchbolt length for precise fitting on site. Stainless steel locking bolt with a 30mm throw. Easy to fit with just three holes to drill in the gate. 5 pin eurocylinder for reliable locking. Square shape design fits various gate styles. Marine grade, salt spray tested for 1000 hours. Designed for heavy use gates. Comes with a set of three keys, with easy replacement options available. Product Details Product codeDescription SBLD1601AH To fit 10-30mm (1/2" - 1-1/4") gate frames - modern handle SBLD1602AH To fit 40-60mm (1-1/2" - 2-1/4") gate frames - modern handle SBLD1601THD To fit 10-30mm (1/2" - 1-1/4") gate frames - traditional handle SBLD1602THD To fit 40-60mm (1-1/2" - 2-1/4") gate frames - traditional handle Specifications Marine grade: Salt spray tested for 1000 hours. Bolts: Adjustable, latchbolt springs 13mm (1/2") and deadbolt moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit strike plate by either welding or screw fixing it to the gate post. Ensure latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER SBKLLT Select Pro Bolt-on long throw keylatch - fits up to 60mm gate frame

Product Overview The SBKLLT Select Pro bolt-on long throw keylatch is designed to secure gates every time they are used, making it an ideal choice for communal, school, and alley gating. The lock latches shut when the gate is closed and can only be opened with a key, ensuring maximum security. The lock is keyed on both sides, making it suitable for use by disabled or elderly individuals. The adjustable latchbolt allows for precise fitting on-site, and the lock comes with three keys, with easy replacement options available. Key Features Keyed on both sides for increased security. Machined stainless steel latchbolt with a 22mm throw into the gate post. Adjustable latchbolt length for precise fitting on site. Easy to rotate latchbolt for left/right hand gates. Marine grade, salt spray tested for 1000 hours. Comes with a set of three keys, with easy replacement options available. Product Details Product codeDescription SBKLLT1601 To fit 10-30mm (1/2" - 1-1/4") gate frames SBKLLT1602 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolts: Adjustable, latchbolt springs 22mm (7/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit strike plate by either welding or screw fixing it to the gate post. Ensure latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle lock and spray the mechanism inside with light oil. Video Click to watch the installation video

Gatemaster BD Superlock Deadlock | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BD Superlock deadlock provides maximum security with a simple, single 15mm locking action. Designed for ease of installation, this deadlock features a slim 70mm wide lock case and an adjustable, removable deadbolt to fit most gate designs. Made from stainless steel, the BD Superlock deadlock ensures durability and long-lasting performance for outdoor gates. Key Features Single 15mm locking action for maximum security Slim 70mm wide lock case Made from stainless steel for outdoor durability Adjustable and removable deadbolt for easy fitting Suitable for left and right handed gates Supplied with bolt support plate Product Description The Gatemaster BD Superlock deadlock offers a robust and reliable locking solution for gate frames up to 60mm. Its simple deadlock action ensures the gate remains open until the key is turned, providing both security and convenience. The slim design and adjustable deadbolt make it easy to fit on most gate frames, ensuring a secure and durable lock. Constructed from stainless steel, the BD Superlock deadlock is built to withstand outdoor conditions, offering long-term durability and reliability. The deadbolt moves 15mm into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt support plate, ensuring a straightforward installation process. This lock is non-handed, making it suitable for both left and right hand gates. It comes in two models to fit different gate frame sizes: BD1030: Fits flat bar and up to 30mm (1 1/4") box section BD4060: Fits 40 to 60mm (1 1/2" to 2 1/4") box section Installation Instructions Drill 2 x 9mm holes at 140mm centres for fixing bolts provided. Drill a second 18mm clearance hole for the deadbolt at 60mm centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the deadbolt through the bottom 18mm hole. Lock the deadbolt with the hex key supplied by inserting the hex key into the end of the deadbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the deadbolt moves freely. Maintenance Every 6 months: Lubricate the deadbolt with light oil. Annually, dismantle the lock and spray the mechanism with light oil. Product Details Product CodeDescription BD1030 Fits flat bar and up to 30mm (1 1/4") box section BD4060 Fits 40 to 60mm (1 1/2" to 2 1/4") box section Dimensions Specific dimensions are available upon request or from the product specifications sheet.

GATEMASTER APS Hydraulic Gate Closer & Hinge Kit | Safe & Reliable Self-Closing Gates

Product Overview The APS Hydraulic Gate Closer & Hinge Kit is designed to provide safe and reliable gate closing using proven hydraulic technology. This kit is ideal for gates that need to be self-closing, ensuring security and convenience without the need for power. The kit comes with either a standard wrap-around hinge (APS) or a stop hinge (APSSTOP) that prevents the gate from opening more than 100°. Key Features Hydraulic gate closer and top hinge kit for self-closing gates Suitable for gates up to 150kg No power required Fully adjustable ROSPA compliant closing speed with closing and latching speed adjustments Robust closer unit fitted underneath the gate, acts as a load-bearing lower hinge Unobtrusive and highly vandal-resistant design Includes a top hinge assembly that is fully adjustable for correct gate positioning Product Description The APS Hydraulic Gate Closer & Hinge Kit is an advanced solution for gates requiring reliable and safe self-closing functionality. The hydraulic closer and hinge kit is suitable for gates weighing up to 150kg and does not require any power source, making it an efficient and eco-friendly choice. The closer unit, fitted underneath the gate, also serves as a load-bearing lower hinge, ensuring robustness and stability. The kit includes fully adjustable closing and latching speed settings, compliant with ROSPA standards, to provide controlled and safe gate operation. The hydraulic gate closer is unobtrusive and highly resistant to vandalism, ensuring long-lasting durability and security. Additionally, the top hinge assembly is fully adjustable, allowing for precise gate positioning after installation. The APS kit comes in two versions: APS: Hydraulic gate closer with standard wrap-around hinge APSSTOP: Kit with a special stop hinge to prevent the gate from opening more than 100°, protecting the closer from damage Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Attach the hydraulic gate closer unit underneath the gate, ensuring it acts as the load-bearing lower hinge. Install the top hinge assembly, adjusting as necessary to position the gate correctly. Adjust the closing and latching speed settings to ensure safe and controlled gate operation. Maintenance Regular maintenance will ensure the longevity and proper functioning of the APS Hydraulic Gate Closer & Hinge Kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the closer and hinges for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription APS Hydraulic gate closer with standard wrap-around hinge APSSTOP Kit with special stop hinge to prevent gate from opening more than 100°, protecting the closer from damage Dimensions Specific dimensions are available upon request or from the product specifications sheet. For more information, refer to the specification sheet available for download.

GATEMASTER TDH Black traditional handle set

Gatemaster TDH Black traditional handle set This traditional twisted handle set is perfect for more a more traditional look and is popularly used on wrought iron gates. Aluminium Twisted design for a traditional look  

GATEMASTER BSKG Superlock Gapless Keep

Gatemaster BSKG Superlock gapless keep The gapless keep is a great option when there is a small gap between the gate and the post, acting as both a security measure and a gate stop. Simply drill two holes in the post and bolt on with our innovative expanding fasteners. Requires a minimum of a 15mm gap between the gate and the post.

GATEMASTER BSKS Security keep for Superlock with interlocking tab

Gatemaster BSKS Superlock interlocking keep The clever interlocking design of this keep means that the gate cannot be levered off the post once the gate is closed. One section bolts in front of the lock and the post bracket is easy to fit with the two expanding fasteners. Requires a minimum of a 38mm gap between the gate and the post.

GATEMASTER BSK Security keep for Superlock

Gatemaster BSK Superlock keep This keep works with all of the Superlock range. Simply mount the gate slam plate onto the gate frame when fixing the lock and use the expanding fasteners to fix the keep onto the gate post. Requires a minimum of a 38mm gap between the gate and the post. More information in specification sheet (see downloads).

GATEMASTER BQS Shroud for quick exit locks

Gatemaster BQS Superlock quick exit shroud This security shroud is designed to prevent access from the outside of the gate, meaning outsiders cannot reach around and operate the lock. No fixings are required, simply bolt on the shroud in front of the push pad. To be used in conjunction with our quick exit Superlocks only  

Gatemaster BQ Superlock Bolt-On Quick Exit No Outside Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQ Superlock bolt-on quick exit no outside access lock is designed for gates that are used solely for exiting a property. Featuring a green push pad for quick exit from the inside, this lock provides a secure and unobtrusive locking mechanism. Made from stainless steel, the BQ NA Superlock ensures ultimate outdoor durability and long-lasting performance. It is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit No access from outside, push pad on inside Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQ Superlock bolt-on quick exit no outside access lock is an ideal solution for gates that only require exit functionality. The green push pad on the inside facilitates rapid exit, while the lack of external access ensures security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQ NA Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQ1030LNA: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQ4060LNA: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQ1030RNA: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQ4060RNA: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQ1030LNA Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQ4060LNA Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQ1030RNA Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQ4060RNA Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BQDG Superlock Bolt-On Quick Exit Digital Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQDG Superlock bolt-on quick exit digital access lock is designed for communal areas where easy and rapid exit is needed. This lock features keyless entry via a digital keypad and a highly visible push pad for quick exit from the inside. Constructed from stainless steel, the BQDG Superlock ensures ultimate outdoor durability and long-lasting performance. It is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit Digital keypad access on one side, push pad on the other Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQDG Superlock bolt-on quick exit digital access lock offers a secure and durable locking solution for communal gates. Featuring keyless entry via a digital keypad on one side and a green push pad on the inside for rapid exit, this lock ensures convenience and security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQDG Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQDG1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQDG4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQDG1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQDG4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove the keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQDG1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQDG4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQDG1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQDG4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BQK Superlock Bolt-On Quick Exit Key Access | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BQK Superlock bolt-on quick exit key access lock is designed for gates that require a rapid exit option. Featuring a green push pad for easy exit, this lock also includes key entry from the outside. Made from stainless steel, the BQK Superlock ensures ultimate outdoor durability and long-lasting performance. The lock is perfect for securing box section metal gate frames up to 60mm. Key Features Quick exit push pad for easy exit Key access on one side, push pad on the other Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Security shroud available to prevent access to push pad from outside Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BQK Superlock bolt-on quick exit key access lock is ideal for gates that need a fast and secure exit solution. The green push pad on the inside facilitates rapid exit, while key access on the outside ensures security. The slim design and adjustable latchbolt make it easy to fit on most gate frames, providing a secure and durable locking solution. Constructed from stainless steel, the BQK Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. The lock is supplied with a bolt guide plate and a gate post strike plate for straightforward installation. A security shroud is also available to prevent unauthorized access to the push pad from the outside. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BQK1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQK4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQK1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQK4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BQK1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BQK4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BQK1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BQK4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BDGS Superlock Digital Single Sided | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BDGS Superlock digital single-sided lock combines the convenience of a mechanical keypad with the ease of installation of the Superlock range. This lock is perfect for securing box section metal gate frames, offering durability and security with a slim 70mm wide lock case and an adjustable latchbolt for precise fitting. Made from stainless steel, it ensures ultimate outdoor durability and long-lasting performance. Key Features Digital single-sided lock with keypad on one side Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Durable design reduces friction and wear Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BDGS Superlock digital single-sided lock provides a secure and durable locking solution for metal gate frames up to 60mm. This lock features a keypad on one side, ensuring convenience and security from one direction. The slim design makes it easy to fit on most gate frames, while the adjustable latchbolt allows for precise installation. Constructed from stainless steel, the BDGS Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. Additionally, the latchbolt is supported on the edge of the gatepost to minimize friction and wear, enhancing the lock's lifespan. This lock is non-handed, making it suitable for both left and right hand gates. It comes in four models to fit different gate frame sizes and orientations: BDGS1030L: Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BDGS4060L: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BDGS1030R: Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BDGS4060R: Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 6 months: Remove the keypad from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BDGS1030L Fits 10-30mm (1/2" - 1-1/4") gate frames - left hand BDGS4060L Fits 40-60mm (1-1/2" - 2-1/4") gate frames - left hand BDGS1030R Fits 10-30mm (1/2" - 1-1/4") gate frames - right hand BDGS4060R Fits 40-60mm (1-1/2" - 2-1/4") gate frames - right hand Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BDG Superlock Digital Double Sided | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BDG Superlock digital double-sided lock is a perfect solution for securing box section metal gate frames. This lock combines durability and ease of installation, featuring a slim 70mm wide lock case and an adjustable latchbolt for precise fitting. Made from stainless steel, it ensures ultimate outdoor durability and long-lasting performance. Key Features Digital double-sided lock with keypads on both sides Slim 70mm (2-3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Latchbolt moves 15mm (5/8") deep into the gatepost Durable design reduces friction and wear Non-handed, suitable for both left and right hand gates Product Description The Gatemaster BDG Superlock digital double-sided lock provides a secure and durable locking solution for metal gate frames up to 60mm. This lock features keypads on both sides, ensuring convenience and security from either direction. The slim design makes it easy to fit on most gate frames, while the adjustable latchbolt allows for precise installation. Constructed from stainless steel, the BDG Superlock is built to withstand outdoor conditions, offering long-term durability and reliability. The latchbolt moves 15mm (5/8") into the gatepost, providing a deep and secure lock. Additionally, the latchbolt is supported on the edge of the gatepost to minimize friction and wear, enhancing the lock's lifespan. This lock is non-handed, making it suitable for both left and right hand gates. It comes in two models to fit different gate frame sizes: BDG1030: Fits 10-30mm (1/2" - 1-1/4") gate frames BDG4060: Fits 40-60mm (1-1/2" - 2-1/4") gate frames Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill an 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw on the latchbolt through the larger hole. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix the lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix the strike plate by either welding or screw fixing onto the gate post. Maintenance Every 6 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly. Product Details Product CodeDescription BDG1030 Fits 10-30mm (1/2" - 1-1/4") gate frames BDG4060 Fits 40-60mm (1-1/2" - 2-1/4") gate frames Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BLD Superlock Bolt-On Latch Deadlock | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BLD Superlock bolt-on latch deadlock is a new generation, easy-to-fit lock for metal gates. Combining the convenience of a latch with the security of a deadlock, this versatile lock features a slim 70mm width, making it suitable for most gate designs. Made from stainless steel, it is designed for ultimate outdoor durability. Key Features Combination of latch and deadlock for convenience and security Slim 70mm (2 3/4") wide lock case Made from stainless steel for outdoor durability Adjustable and removable latchbolt for easy fitting Fits both left hand and right hand gates Supplied with handles - available in plain black or traditional styles Includes bolt support plate and gate post strike plate Product Description The Gatemaster BLD Superlock bolt-on latch deadlock offers a robust and reliable locking solution for gate frames up to 60mm. Its unique design provides both the convenience of a latch and the security of a deadlock, making it a versatile choice for various gate designs. The slim 70mm lock case allows for easy installation, and the latchbolt is adjustable in length for precise fitting on site. The latchbolt can be easily rotated to accommodate both left and right handed gates. This lock is made from stainless steel, ensuring long-lasting durability in outdoor conditions. The BLD Superlock is supplied with handles in two styles: plain black and traditional, to suit different aesthetic preferences. The lock is also equipped with a bolt support plate and a gate post strike plate, making installation straightforward. The BLD Superlock is available in four models: BLD1030P: Fits 10-30mm gates with plain black handle BLD4060P: Fits 40-60mm gates with plain black handle BLD1030T: Fits 10-30mm gates with traditional handle BLD4060T: Fits 40-60mm gates with traditional handle The locking bolt is adjustable, with the latch retracting 15mm (5/8") and the deadbolt throwing out 15mm (5/8"). This product is perfect for both left hand and right hand gates, providing versatility in application. Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill a second 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the latchbolt through the middle hole. Lock the latchbolt and deadbolt with the hex key supplied by inserting the hex key into the end of the latchbolt and the deadbolt. Fix lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt and deadbolt move freely. Fix strike plate by either welding or screw fixing onto the gate post. Maintenance: Every 6 months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray mechanism with light oil. Product Details Product CodeDescription BLD1030P Standard superlock for 10-30mm gates - plain black handle BLD4060P Standard superlock for 40-60mm gates - plain black handle BLD1030T Standard superlock for 10-30mm gates - traditional handle BLD4060T Standard superlock for 40-60mm gates - traditional handle Dimensions Specific dimensions are available upon request or from the product specifications sheet.

Gatemaster BK Superlock Bolt On Keylatch | Fits Up to 60mm Gate Frame

Product Overview The Gatemaster BK Superlock bolt on keylatch combines the convenience of a latch with the security of a deadlock, making it a versatile choice for various gate designs. Its slim 70mm width ensures it fits most gate frames, providing both durability and ease of installation. Made from stainless steel, this keylatch is designed for ultimate outdoor durability. Key Features Combination of latch and deadlock for convenience and security Slim 70mm (2 3/4") wide lock case Made from stainless steel for outdoor durability Key operated latch - simply slam the gate shut and open with the key Adjustable and removable latchbolt for easy fitting Fits both left hand and right hand gates Includes bolt support plate and gate post strike plate Comes with 3 keys Product Description The Gatemaster BK Superlock bolt on keylatch is a robust and reliable locking solution for gate frames up to 60mm. Its unique design features a combination of a latch and deadlock, providing both convenience and enhanced security. The slim 70mm wide lock case allows for easy installation on most gate designs. Constructed from stainless steel, this keylatch is built to withstand outdoor conditions, ensuring long-lasting durability. The latchbolt is adjustable in length for precise fitting on site and can be easily rotated to accommodate both left and right handed gates. The lock is supplied with a bolt support plate and a gate post strike plate, making installation straightforward. The BK Superlock is available in two models: BK1030: Fits flat bar and up to 30mm (1 1/4") box section BK4060: Fits 40 to 60mm (1 1/2" to 2 1/4") box section The locking bolt is adjustable, and the latch retracts 15mm (5/8"). This product is perfect for both left hand and right hand gates, providing versatility in application. Installation Instructions Drill 2 x 9mm (3/8") holes at 140mm (5 1/2") centres for fixing bolts provided. Drill a second 18mm (3/4") clearance hole for the latchbolt at 60mm (2 3/8") centres up from the bottom fixing hole. Hold the lock against the back of the box section and screw the latchbolt through the middle hole. Lock the latchbolt in place with the hex key supplied by inserting the hex key into the end of the latchbolt. Fix lock in place using the stainless steel bolt support plate and the countersunk screws provided. Ensure the latchbolt moves freely. Fix strike plate by either welding or screw fixing onto the gate post. Maintenance: Every 6 months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray mechanism with light oil. Product Details Product CodeDescription BK1030 To fit flat bar and up to 30mm (1 1/4") box section BK4060 To fit 40 to 60mm box section (1 1/2" to 2 1/4") Dimensions Specific dimensions are available upon request or from the product specifications sheet.

ROLLING CENTRE Magnum2 Kit 2 | Cantilever Gates Up to 18m Opening & 2200kg Weight

Product Overview The Magnum2 Kit 2 is designed for cantilever gates with clear openings up to 18m and a maximum weight of 2200kg. Magnum 2 cantilever gate systems are widely used in commercial, public sector, and industrial environments due to their robustness and high level of security. The cantilever mechanism allows for intensive use, making it a reliable solution for demanding applications. Key Features Clear gate openings up to 18m Supports gates up to 2200kg No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum2 Kit 2 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 18m in clear opening and 2200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum2 Kit 2 includes the following components: 4 x 6m GIPI 4RM2C6 Magnum 2 Hot Galvanised Track 2 x CA4RMS2 8-Wheeled Magnum2 Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum2 Carriage Drawing Magnum2 Carriage Table Magnum2 Meeting Point Drawing Magnum2 Meeting Point Table Magnum2 Support Wheel Drawing Magnum2 Support Wheel Table Magnum2 Track Drawing Magnum2 Track Table The components included in the Magnum2 Kit 2 are constructed from high-grade materials to ensure durability and longevity. The hot-dip galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 4 | Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 4 is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments due to their robustness and high security. The cantilever mechanism allows for intensive use, making it a reliable solution for demanding applications. Key Features Clear gate openings up to 16m Supports gates up to 1200kg No track needed No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 4 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum Kit 4 includes the following components: 1 x 3m GIPI 6RMZ3 Magnum Zinc Galvanised Track 1 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x CA4RMS 8-Wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 4 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 3 | Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 3 is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments where intensive use and high security are required due to the robustness and reliability of the cantilever mechanism. The cantilever system provides numerous benefits, including no requirement to lay track, minimal ground work, low maintenance, and a high level of security. Key Features Clear gate openings up to 16m Supports gates up to 1200kg No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 3 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum Kit 3 includes the following components: 4 x 3m GIPI 6RMZ3 Magnum Zinc Galvanised Track 2 x CA4RMS 8-Wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 2 | Silent Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 2 Silent Kit is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments where intensive use and high security are required due to the robustness and reliability of the cantilever mechanism. Key Features Clear gate openings up to 16m Supports gates up to 1200kg 35% less noise with silent cantilever systems No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 2 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages, making the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Magnum Kit 2 includes the following components: 2 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x Silent M 8-wheeled Silent Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 9 | Cantilever Gates Up to 5m Opening & 600kg Weight

Product Overview The Medium Kit 9 is designed for cantilever gates with clear openings up to 5m and a maximum weight of 600kg. Cantilever gate systems are widely chosen in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need to lay a track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 5m Supports gates up to 600kg No track to lay Limited ground work needed Lower cost of labor Reduced maintenance Capable of intensive use Sleek finish Product Description The Medium Kit 9 cantilever gate system provides a practical and efficient solution for managing large and heavy gates. Designed to support gates up to 5m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation, even in settings with uneven ground or limited space for ground work. Cantilever gate systems are known for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Medium Kit 9 includes the following components: 1 x 3m GIPI 5RG3 Galvanised Track 1 x 4.5m GIPI 5RG4.5 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 9 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 8 | Cantilever Gates Up to 8m Opening & 600kg Weight | Non-Galvanised Track

Product Overview The Medium Kit 8 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit is supplied with non-galvanised tracks, catering to settings where corrosion resistance is less of a priority but maintaining robust operation. Cantilever gate systems are preferred in commercial, public sector, and residential environments for their efficiency and minimal infrastructure needs. Key Features Clear gate openings up to 8m Supports gates up to 600kg Non-galvanised track No track to lay into the ground Limited ground work required Reduced cost of labor Lower maintenance Capable of intensive use Sleek finish Product Description The Medium Kit 8 cantilever gate system provides a practical and efficient solution for managing large and heavy gates. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation, even in settings with uneven ground or limited space for ground work. Cantilever gate systems are known for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Medium Kit 8 includes the following components: 1 x 6m GIPI 5RG6 Non Galvanised Track 1 x 3m GIPI 5RG3 Non Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 8 are constructed from high-grade materials to ensure durability. While the non-galvanised tracks require consideration of environmental factors to prevent corrosion, they offer a cost-effective alternative in protected or indoor environments.

ROLLING CENTRE Medium Kit 7 | Cantilever Gates Up to 8m Opening & 600kg Weight | Non-Galvanised Track

Product Overview The Medium Kit 7 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit is supplied with a non-galvanised track, catering to settings where corrosion resistance is less of a priority but maintaining robust operation. Cantilever gate systems are preferred in commercial, public sector, and residential environments for their efficiency and minimal infrastructure needs. Key Features Clear gate openings up to 8m Supports gates up to 600kg Non-galvanised track No track and no ground work required Reduced cost of labor Minimum maintenance Ideal for intensive use Aesthetically pleasing Product Description The Medium Kit 7 cantilever gate system provides a practical and efficient solution for managing large and heavy gates. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation, even in settings with uneven ground or limited space for ground work. Cantilever gate systems are known for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Medium Kit 7 includes the following components: 1 x 6m GIPI 5RG6 Non Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions

ROLLING CENTRE Medium Kit 6 | Silent Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 6 Silent Kit is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. Key Features Clear gate openings up to 8m Supports gates up to 600kg 35% less noise with silent cantilever systems No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 6 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Medium Kit 6 includes the following components: 2 x 4.5m GIPI 5 RGZ4.5 Galvanised Track, supplied in 2 x 4.5 metre lengths 2 x Silent G Medium 8-wheeled cantilever carriages with MAPAR wheels 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Silent G Carriage Drawing Silent G Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 6 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 5 | Silent Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 5 Silent Kit is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. Key Features Clear gate openings up to 8m Supports gates up to 600kg 35% less noise with silent cantilever systems No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 5 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Medium Kit 5 includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 1 x 3m GIPI 5 RGZ3 Galvanised Track 2 x Silent G Medium 8-wheeled cantilever carriages with MAPAR wheels 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Silent G Carriage Drawing Silent G Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 5 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 4 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 4 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 4 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 4 includes the following components: 3 x 3m GIPI 5 RGZ3 Galvanised Track, supplied in 3 x 3m tracks 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 4 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 3 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 3 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 3 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 3 includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 2 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 2 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 2 includes the following components: 2 x 4.5m GIPI 5 RGZ4.5 Galvanised Track, supplied in 2 x 4.5 metre lengths 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 4 | Cantilever Gates Up to 6m Opening & 450kg Weight | Non-Galvanised Track

Product Overview The Mini Kit 4 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features a non-galvanised track, providing an economical option for various applications. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track in the ground, minimal ground work required, lower labor costs, less maintenance, and suitability for intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg No requirement to lay track in the ground Minimal ground work required Lower cost of labor Less maintenance Suitable for intensive use Aesthetically pleasing finish Product Description The Mini Kit 4 cantilever gate system offers a reliable and cost-effective solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a practical and economical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 4 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI4RP6 mini cantilever track, non-galvanised Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 4 are constructed from high-grade materials to ensure durability and longevity. While the track is non-galvanised, the remaining components feature a galvanized finish, providing additional protection against corrosion and making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 3 | Silent Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 3 Silent Kit is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Silent cantilever gate systems are widely used in commercial, public sector, and residential environments due to their many benefits over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg 35% less noise with silent cantilever systems No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 3 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Mini Kit 3 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI 4 RPZ6 track made from S280GD structural grade steel Specifications: Silent P Carriage Drawing Silent P Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 2 | Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 2 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 6m Supports gates up to 450kg No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 2 includes the following components: 1 x 6m GIPI 4 RPZ6 Galvanised Track made from S280GD structural grade steel 2 x CA4RPS Mini 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41B/S Mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 2 x 50B Meeting Points made from 235 structural grade steel with a galvanized finish Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

CCE SAFETY PICCOLA Conductive safety edge with 8.2 KΩ, h=14mm, length optional - with cable for serial connection

CCE Safety Safety contact edges with 8.2 KΩ, h=14mm, length optional PICCOLA can be used on swing gates to protect the shearing point between the pillar and the gate leaf. It also can be used on industrial machinery as a safety edge for perimetral safety. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-PICCOCND800 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=0.8 m CC-PICCOCND1200 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=1.2 m CC-PICCOCND1600 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=1.6 m CC-PICCOCND2000 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=2 m CC-PICCOCND2500 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=2.5 m    

CCE SAFETY MINI LINK Conductive safety edge with 8.2 KΩ, h=38mm, length optional - with cable for serial connection (CC-16MINILINK, CC-20MINILINK, CC-25MINILINK)

Conductive safety edge with 8.2 KΩ, h=38mm, length optional - with cable for serial connection (CC-16MINILINK, CC-20MINILINK, CC-25MINILINK) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16MINILINK 38mm Conductive safety edge 8.2 KΩ L=1.6m h=38mm with cable for serial connection CC-20MINILINK 38mm Conductive safety edge 8.2 KΩ L=2m h=38mm with cable for serial connection CC-25MINILINK 38mm Conductive safety edge 8.2 KΩ L=2.5m h=38mm with cable for serial connection Safety resistive edges are EN12978 compliant, when paired to the 135/2 board  

CCE SAFETY 135/2 2-channel Electronic Board for Certification of Conductive or Resistive Safety Edges

CCE Safety 135/2 2-channel electronic board for certification of conductive or resistive safety edges 2-channel electronic board for certification of conductive safety edges (up to 4 edges, 2 per channel) or resistive safety edges (in series). See safety edges bellow.  

CCE SAFETY MINI Conductive safety edge with 8.2 KΩ, h=38mm, length optional (CC-16MINI, CC-20MINI, CC-25MINI)

CCE Safety Conductive safety edge with 8.2 KΩ, h=38mm, length optional - EN12978 (CC-16MINI, CC-20MINI, CC-25MINI) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16MINI 38mm Conductive safety edge 8.2 KΩ L=1.6m h=38mm CC-20MINI 38mm Conductive safety edge 8.2 KΩ L=2m h=38mm CC-25MINI 38mm Conductive safety edge 8.2 KΩ L=2.5m h=38mm LINK versions with cable available (for serial connection) - click to open. Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY COMPATTA LINK Conductive 60mm Safety Edges for series connection (resistor included) with optional length - EN12978

CCE Safety Conductive 60mm Safety Edges for series connection (resistor included) - EN12978 (CC-16LINK, CC-20LINK, CC-25LINK, CC-40LINK, CC50-LINK) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16LINK 60mm Conductive safety edge 8.2 KΩ L=1.6m for series connection (resistor included) CC-20LINK 60mm Conductive safety edge 8.2 KΩ L=2m for series connection (resistor included) CC-25LINK 60mm Conductive safety edge 8.2 KΩ L=2.5m for series connection (resistor included) CC-40LINK 60mm Conductive safety edge 8.2 KΩ L=4m for series connection (resistor included) CC-50LINK 60mm Conductive safety edge 8.2 KΩ L=5m for series connection (resistor included) Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY COMPATTA Conductive 60mm Aluminum and Rubber Safety Edge with Obstacle Detection Circuit (CC-16, CC-20, CC-25)

CCE Safety Conductive 60mm Aluminum and Rubber Safety Edge with Obstacle Detection Circuit - EN12978 (CC-16, CC-20, CC-25)  Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE  PRODUCT   PROFILE SIZE  DESCRIPTION CC-16 60mm Conductive safety edge 8.2 KΩ Length=1.6m CC-20 60mm Conductive safety edge 8.2 KΩ Length=2m CC-25 60mm Conductive safety edge 8.2 KΩ Length=2.5m   Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY Resistive Aluminum and Rubber Safety Edge with Obstacle Detection Circuit - EN12978

CCE Safety Resistive Aluminium and Rubber Safety Edge with Obstacle Detection Circuit - EN12978  Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system.. PRODUCT GUIDE PRODUCT DESCRIPTION CC-16 Safety resistive edge L=1.6m CC-20 Safety resistive edge L=2m CC-25 Safety resistive edge L=2.5m 121N Safety resistive edge L=0.90m for IRONBOX Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

DEA Ghost Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216 is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216 Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.

DEA Ghost 100 Underground 180 Degree Conversion Kit | ART 216 | Heavy Duty

Product Overview The Ghost Underground 180 Degree Conversion Kit ART 216GN is a robust solution designed to enhance gate functionality, allowing for a full 180-degree range of motion. This heavy-duty kit is perfect for expanding access capabilities in both residential and commercial properties. Product Description The ART 216GN Conversion Kit is essential for properties that require gates to open completely to 180 degrees. This easy-to-install kit upgrades Ghost underground gate systems, enabling them to utilize space more efficiently and improve vehicle and pedestrian movement. With its heavy-duty construction, the kit ensures long-lasting performance and reliability. Key Features 180-Degree Opening: Enables gates to swing fully open, maximizing access and utility. Heavy Duty: Built to withstand extensive use in demanding environments. Easy to Install: Designed for quick and straightforward installation, minimizing downtime. Specifications: Product Type: Gate conversion kit. Model: ART 216GN. Compatibility: Specifically made for Ghost underground gate systems. Function: Extends gate opening to 180 degrees for enhanced access.  

LOCINOX VERTICLOSE-2-WALL | Hydraulic Gate Closer | Wall Mounting, Adjustable Speed

Product Overview The VERTICLOSE-2 Wall gate closer is a powerful and versatile hydraulic gate closer specifically designed for wall mounting. Positioned 90° in relation to the gate, it features a specially designed arm that turns around the wall or post, ensuring a large opening angle. Made with an aesthetic anodized aluminium housing and high-tech internal components, this gate closer promises an exceptionally long lifespan and reliable performance. Key Features Self-closing gate closer with adjustable speed and final snap Specially designed arm for wall mounting ensuring a large opening angle Scratch-resistant and corrosion-free anodized aluminium housing Aesthetic and compact design Integrated pretension for extra smooth installation Closing force over the full 180° opening angle Firmly fixed thanks to patented Quick-Fix system Easy to open with a maximum force of 25 Nm Product Description The VERTICLOSE-2 Wall gate closer is engineered to provide reliable and efficient gate closing for wall-mounted installations. Its anodized aluminium housing is both scratch-resistant and corrosion-free, ensuring durability and a sleek appearance. The adjustable speed and final snap features allow for customized closing force and smooth operation. With a closing force maintained across the full 180° opening angle, this gate closer is ideal for a variety of applications. The gate closer is easy to install, thanks to its integrated pretension and the patented Quick-Fix system. This ensures a firm and secure installation while allowing for easy adjustments. The aesthetic and compact design makes it suitable for both residential and commercial settings, providing a practical and stylish solution for gate automation. Specifications Type: Self-closing hydraulic gate closer Mounting: Wall mounting Material: Anodized aluminium housing Adjustable Speed: Yes Final Snap: Yes Max. Opening Angle: 180° Max. Opening Force: 25 Nm Fixing System: Patented Quick-Fix system RAL Colour Availability The VERTICLOSE-2 Wall gate closer is available in various RAL colours to match different aesthetic preferences and gate designs. Additional Information For more details, please refer to the product manual available in the downloads section. Contact our office for discounts and additional purchase information at 01564 731035.

DEA BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws

BAT/LIVI/N SUPPORT Fixing plate for LIVI/N batteries with screws Fixing plate for LIVI/N batteries with screws. More information in downloads.    

DEA 460N V2 Adjustable fixing plate for LIVI/N

460N V2 Adjustable fixing plate for LIVI/N This is a adjustable fixing plate for LIVI/N operator. Check downloads for more useful information.  

DEA 451 External unlocking device with cable for REV (4.5m) - use with BLINDOS

451 External unlocking device with cable for REV (4.5m) - use with BLINDOS External unlocking device with cable for REV (4.5m).To be used with BLINDOS. More info in downloads.  

DEA BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable

BLINDOS PACK Aluminium safety enclosure with European cylinder and optional unlocking device by cable This BLINDOS PACK is a combination of BLINDOS and one of the following products: 450N, 451, GEKO/SF, 580M. All parts are available separately as well.  

DEA Galvanized Pinion for REV and GULLIVER Operators (M6, Z18/IB, Z22, Z15/IB)

Product Overview These high-quality galvanized pinions are designed for use with REV and GULLIVER operators. They ensure reliable performance and durability, making them ideal for various gate automation needs. Available in multiple sizes, these pinions are essential components for maintaining the smooth operation of your gate systems. Key Features Durable galvanized construction for long-lasting use Compatible with REV and GULLIVER operators Available in multiple sizes to suit different applications Ensures smooth and reliable gate operation Product Description The galvanized pinions for REV and GULLIVER operators are crafted to provide exceptional durability and performance. The robust construction ensures that they can withstand the demands of intensive gate operations. These pinions come in various sizes, allowing you to choose the perfect fit for your specific needs. The pinions are easy to install and help maintain the smooth functioning of your gate automation systems. Each pinion is designed to work seamlessly with REV and GULLIVER operators, ensuring compatibility and reliable performance. The galvanized finish offers excellent resistance to corrosion, enhancing the longevity of the pinions even in harsh weather conditions. Product Guide Product CodeProductSizeDescription 619090 PIGNONE Z22 REV Z=22 Oversized pinion Z=22 for REV 360674 PIGNONE Z15/IB REV M=4 Z=15 Øe=68 Galvanized pinion for IRONBOX M=4 Z=15 Øe=68 (REV/RF) 360673 PIGNONE Z18/IB REV M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 REV 360580 M6 M=6 Z=12 Øe=84 M=6 Z=12 Øe=84 GULLIVER galvanized gear 360412 PIGNONE Z18/IB GULLIVER M=4 Z=18 Øe=80 Galvanized pinion for IRONBOX M=4 Z=18 Øe=80 GULLIVER Note: When using an oversized pinion Z22, the maximum weight of the leaf should be reduced by 30%. Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA IRONBOX Vandal-proof Box for REV and GULLIVER with Magnetic Limit Switch and Foundation Plate (IRONBOX, IRONBOX/XS)

Product Overview The IRONBOX and IRONBOX/XS vandal-proof boxes are designed to protect sliding gate motors and their electronic components. Suitable for collective sliding gates (REV in the IB version) and industrial sliding gates (GULLIVER in the IB version), these boxes offer robust protection and an elegant design. The IRONBOX/XS is compact, making it ideal for installations with limited space or requiring a specific design aesthetic. Key Features Vandal-proof design made of steel Equipped with a magnetic limit switch for precise stopping Customized access key for added security Spacious interior for easy installation and maintenance Essential design for clean and tidy installations Product Description The IRONBOX series offers unparalleled protection for your gate automation systems. Made from painted steel, these boxes are designed to prevent tampering and vandalism, ensuring that your motors and electronic components remain safe. The customized access key adds an extra layer of security, making unauthorized access nearly impossible. Both IRONBOX and IRONBOX/XS come with a magnetic limit switch, which ensures accurate stopping during both opening and closing operations. The larger IRONBOX model provides ample working space for complex installations and maintenance, while the IRONBOX/XS is tailored for simpler installations with its compact size of only 36 cm wide, 60 cm high, and 22 cm deep. Installation is straightforward, with a significant working area in the IRONBOX and adequate room in the IRONBOX/XS for professional maneuvering during setup and maintenance. Both models include an internal fixing plate for organizing the control panel and electronic devices, ensuring a practical, fast, and orderly setup. Product Guide Product CodeProductDescription 619080 IRONBOX RAL 9006 painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 594 x 1002 x 280 mm (without pinion). 619100 IRONBOX/XS Painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 359 x 607 x 219 mm (without pinion). Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator

DEA FM/IB Magnetic limit switch for IB version of Gulliver or REV operator Magnetic limit switch for IB version of Gulliver or REV operator  

DEA NET-BOX - The Device for Management of Your Remotes from Your Office (Radio Controls)

Product Overview The NET-BOX is the ultimate bench programmer designed to read, clone, and customize remote controls and control units for gates quickly and accurately. This device streamlines the management of your remote controls, making it a fast and error-proof operation, all from the convenience of your office. Key Features Create and activate pre-recorded virtual remote controls in the memory of the control unit or receiver Increase the security of remote controls by setting a customized encryption key Read the features of a DEA remote control and transfer them to a new one Clone the features of a remote control in series for fixed code transmission systems Replace a stolen or lost remote control safely by creating a new one that eliminates the old one Program DE@NET control units conveniently on the bench by transferring preset data from DEAcloud Product Description The NET-BOX offers a comprehensive solution for managing remote controls for gate automation systems. With its advanced features, you can easily create and activate virtual remote controls, ensuring they are securely stored in the memory of your control units or receivers. Enhance the security of your system by setting customized encryption keys for your remote controls. The NET-BOX makes it simple to read the features of an existing DEA remote control and transfer them to a new one, or clone these features in series for systems using fixed code transmission. In case of a lost or stolen remote, the NET-BOX allows you to generate a new remote that invalidates the old one, providing peace of mind and maintaining security. Additionally, the NET-BOX facilitates the programming of DE@NET control units by transferring data from DEAcloud directly to the control unit, simplifying the setup process for new installations. Note Each NET-BOX device includes 1 pc GT-CABLE for easy connection and setup. Product Guide Product CodeProductDescription NET-BOX Device Device for management, cloning, and customization of remote controls and control units. Includes 1 pc GT-CABLE. Accessories GT-CABLE DEAcloud Subscription Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-COM - Device for Installation, Maintenance, Remote Management, and Diagnostics

Product Overview The NET-COM device is designed for the installation, maintenance, remote management, and diagnostics of automation systems. Located inside the installation, NET-COM allows for advanced remote control and management of DE@NET control boards, making it a powerful tool for automation professionals. Key Features Remote control and management of DE@NET control boards Check system functionality and read/modify installation parameters Consult the event register recorded by the control board Manage up to 1,500 remote controls Set programmed automatic opening and closing times with an annual calendar Open the gate telephonically (after enabling) Compatible with any brand of control boards Smartphone access via DEAuser app Product Description The NET-COM device is an essential tool for automation professionals, allowing for the remote management and diagnostics of DE@NET control boards. With NET-COM, you can manage installations from the office, ensuring the correct functioning of the system, reading and modifying installation parameters, and consulting the event register recorded by the control board. NET-COM acts as an interactive receiver that monitors and manages accesses. It can handle up to 1,500 remote controls, allowing you to select time slots and consult the access register. You can also set programmed automatic opening and closing times with an annual calendar and open the gate telephonically after enabling this feature. One of the standout features of NET-COM is its compatibility with any brand of control boards, allowing you to take full advantage of all receiver features. Additionally, with the DEAuser app, you can control the gate with your smartphone, eliminating the need for keys or access codes. If you have installed NET-COM with a data SIM card, you can even check the status of the automation remotely, fine-tune the automatic opening and closing times, and check the access register via remote control. The NET-COM/S version includes a DEA SIM card with prepaid connectivity service for 5 years, providing an all-in-one solution for remote management and diagnostics. Attention GSM remote connectivity is available only in European countries that support 2G technology. Supplied without a SIM (M2M). Possibility of using a SIM supplied by other operators. Product Guide Product CodeProductDescription NET-COM Device Device for installation, maintenance, remote management, and diagnostics of automation systems. NET-COM/S Device with SIM Includes DEA SIM card with prepaid connectivity service for 5 years. Accessories DEA SIM Card Additional Remote Controls Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA 105/N Flush Mounted Photocells

Product Overview The 105/N Flush Mounted Photocells are essential external safety accessories designed to enhance the reliability of your automation systems. These photocells are flush-mounted, providing a sleek and unobtrusive installation. They are always sold in pairs and cover a maximum distance of 20 meters, making them suitable for a variety of applications. Key Features Flush-mounted design for a sleek installation Sold in pairs for effective coverage Maximum distance coverage of 20 meters Optional plastic holders available for cementing Synchronized operation to prevent interference Adjustable optics for perfect alignment Product Description The 105/N Photocells are designed to be flush-mounted, providing a discreet and effective solution for enhancing the safety and reliability of your automation systems. Each pair of photocells covers a distance of up to 20 meters, ensuring comprehensive coverage for your security needs. For installations where precise alignment is required, some models in the DEA photocell range are equipped with adjustable optics. This feature is particularly useful when the photocells are not perfectly aligned during installation. Additionally, the operation of photocells powered with alternating voltage can be synchronized to prevent transmitters and receivers of different pairs from interfering with each other. Product Guide Product CodeProductDescription 662012 105/N Pair of recessed photocells (70xh70x88 mm) Accessories Plastic holder for 105/N (106/N) Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA NET-EXPANSION - DE@NET Expansion Board for Control Boards NET Series

Product Overview The NET-EXPANSION board is designed to enhance the functionality of DE@NET control boards in the NET Series. Available in three versions, this expansion board offers additional inputs and outputs to support various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. It ensures seamless integration with compatible DE@NET boards. Key Features 6 inputs and 8 outputs for NET Series control boards Analog or resistive inputs Traffic light control Compass control Alarm contact with automatic closing on power failure Open gate warning light with variable frequency during opening/closing Compatible with NET230N, NET24N (from version 30), NET724N (from version 1), and NET724N/XL Product Description The NET-EXPANSION board enhances DE@NET control boards by providing additional inputs and outputs. It supports various features, including analog or resistive inputs, traffic light control, compass control, and alarm contacts. The board also includes an open gate warning light with variable frequency during opening and closing. The expansion board is compatible with DE@NET boards that have a serial port, including NET230N and NET24N from version 30, NET724N from version 1, and NET724N/XL. This ensures seamless integration and enhanced functionality for your control systems. Product Variants Product CodeProductDescription 677620 NET-EXPANSION Expansion board with 6 inputs and 8 outputs for control boards NET Series. Includes features like analog or resistive inputs, traffic light control, compass control, alarm contact with automatic closing on power failure, and open gate warning light with variable frequency during opening/closing. Cable length 300mm + spacers. 677622 NET-EXPANSION MINI Mini expansion board with 4 resistive inputs and 1 NC-NO output, compatible only with NET230N and NET24N. Compatibility The NET-EXPANSION board is compatible with the following DE@NET control boards: NET230N (from version 30) NET24N (from version 30) NET724N (from version 1) NET724N/XL Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing control systems before installation.

DEA LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection

Product Overview The LOOP230 loop detector is a magnetic device designed to detect the presence of metal masses, such as vehicles, in a specific passage. When a metal mass is detected, the detector sends a command to the control unit, enabling automated systems like barriers to operate efficiently. Available in both 1-channel and 2-channel versions, the LOOP230 offers flexible solutions for various applications. Key Features Magnetic loop detector for vehicle detection. Available in 1-channel (LOOP230/1) and 2-channel (LOOP230/2) versions. Detects metal masses like cars and motorcycles. Sends commands to control units for automated operation. 2-channel version allows connection of two loops for enhanced control. Ideal for controlling entry and exit barriers or providing multiple commands to the same automation. Product Description LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection The LOOP230 loop detector is an essential component for automated systems that require vehicle detection. By connecting a magnetic loop, the device can detect the presence of metal masses and send appropriate commands to the control unit, ensuring smooth and efficient operation of barriers and other automated controls. Product Variants ProductDescription LOOP230/1 Loop detector, 1 channel. LOOP230/2 Loop detector, 2 channels. The 2-channel version of the LOOP230 allows the connection of two loops, providing the ability to control two separate but close automations (such as two opposite barriers for vehicle entry and exit) or to issue two commands to the same automation (such as opening before a vehicle passes and closing after it). This flexibility makes the LOOP230 an ideal solution for various automated systems that require precise and reliable vehicle detection and control.

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP)

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP) PRODUCT DESCRIPTION SOFT3 Safety black rubber profile (complete with aluminium base) useful to reduce the impact forces for sliding and swing gates (12m) SOFTP Black rubber and aluminium profile useful to reduce the impact forces for overhead doors (24m) GSOFTP Black rubber profile, EPDM S65 (24m)  

DEA KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke

KIT ADA/FKS - OLI/N adapter kit for systems with 960mm brackets centre distance and 270mm operator stroke This item is to be used with following DEA range: DEA OLI  

DEA OLI/SFR Adjustable fixing plates to be screwed

OLI/SFR Adjustable fixing plates to be screwed This item is to be used with following DEA range: DEA OLI  

DEA MAC-LOOK/P Extension for MAC, STING and LOOK rams

MAC-LOOK/P Extension for MAC, STING and LOOK rams This item is to be used with following DEA ranges: DEA MAC DEA STING DEA LOOK

DEA KIT KEY MAC/LOOK Unlocking key for MAC and LOOK ranges (5 pcs)

KIT KEY MAC/LOOK Unlocking key for MAC, LOOK (5 pcs) This item is to be used with following DEA ranges: DEA MAC DEA LOOK  

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke

CS320 and CS520 Rod cover for DEA LOOK range ram: 320 mm or 520 mm stroke This item is to be used with LOOK DEA range.  

CAME TOP42FGN - 806TS-0300 Fixed Code 433MHZ Transmitter

CAME TOP42FGN - 806TS-0300 Two Channel 433mhz Fixed Code Transmitter Two Channel Two Button Fixed Code Transmitter. Black Colour. Manages Several Operators. More Secure Thanks to the Dynamic Code. Uses Only One CR2032 Battery. Flat Battery Alert.

ROGER TECHNOLOGY B71/PBX | Hybrid Inverter | Powerbox Battery Charger and Solar Panel Function

Product Overview The B71/PBX Hybrid Inverter is a versatile power solution designed to provide seamless power for automation systems. It integrates a Powerbox battery charger and solar panel function, making it ideal for various applications requiring reliable and efficient power management. Key Features Hybrid inverter with Powerbox battery charger Supports connection to solar panels Available in "Network Assisted" and "Full Solar" versions Efficiently powers 36V DC brushless digital controllers 230V AC mains voltage support (Network Assisted version) Compact and robust design Product Description The B71/PBX Hybrid Inverter is designed to cater to the power needs of modern automation systems. It is available in two versions: Network Assisted Version (B71/PBX36/BOX): This version operates with a 230V AC mains voltage and provides a hybrid inverter solution for powering automation systems. It includes a battery charger function that can connect to both solar panels and the mains supply, ensuring uninterrupted power for 36V DC brushless digital controllers. Full Solar Version (B71/PBX/BOX): This version is dedicated to fully solar-powered automation systems. It provides a battery charger function solely through the connection to solar panels, making it an ideal solution for remote or off-grid applications. Specifications Product CodeVersionMains VoltageDescription B71/PBX36/BOX Network Assisted 230V AC Hybrid inverter, “Network Assisted” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels or mains supply for powering the 36V DC brushless digital controllers with a mains voltage of 230V AC. B71/PBX/BOX Full Solar / Hybrid inverter, “Full Solar” version, for powering the automation. Also provides a battery-charger function thanks to the connection to the solar panels for powering the brushless digital controllers. The B71/PBX Hybrid Inverter is designed to ensure that your automation systems run smoothly, whether you are connected to the grid or relying solely on solar power. Its compact and robust design makes it a reliable choice for various environments. Notes For detailed installation and operation instructions, please refer to the instruction manual available in the "downloads" section. Ensure compatibility with your existing automation systems and power requirements before installation.

FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

BFT Power supply (PSU) required for all Maxima Ultra LED light kits

MU LIGHT PSU - Power supply (PSU) required for all Maxima Ultra LED light kits We know barriers are quite often in need of repair due to damage, we would like to make it easy for you to buy the parts you need. This is a Power supply for Maxima 35 & Maxima 68 LED light kits and Maxima Ultra 36 LED lights kit. 2 Year guarantee

PROCON ELECTRONICS PROCON MD102-C Magnetic Vehicle Detection Kit | Prevent Accidental Bollard Activation

Product Overview The PROCON MD102-C Magnetic Vehicle Detection Kit is designed to prevent automatic bollards from accidentally rising beneath your vehicle. This next-generation vehicle detection system can also be used to open or close your bollards when a vehicle passes over the loop. Key Features Prevents accidental bollard activation Can be used to open or close bollards MD102 Probe can be buried in the road surface or mounted above ground MD102C Control Unit enables configuration and testing of the probe Complete ready-to-install vehicle detection system Includes 15 meters of cable pre-attached to the probe Super easy to install – no cutting in of induction loops required Install the probe underground or on a post next to your driveway Simply connect the probe cable to the control unit terminals 12/24Vdc Power input Manufactured by Procon Electronics, ensuring quality and reliability Can be used for presence and pulse detection Product Description The PROCON MD102-C Magnetic Vehicle Detection Kit offers a reliable and efficient solution for managing automatic bollards. By installing this system, you can prevent your bollards from accidentally rising beneath your vehicle, ensuring the safety and protection of both the vehicle and the bollard system. The MD102 Probe can be installed in various ways: buried in the road surface underneath the vehicle, mounted alongside the vehicle, or installed above ground next to the vehicle's passage. The accompanying MD102C Control Unit allows for easy configuration and testing of the probe, making the installation process straightforward. This complete vehicle detection system comes with 15 meters of cable pre-attached to the probe, eliminating the need for complex wiring or cutting induction loops. Simply connect the probe cable to the control unit terminals, and the system is ready to go. The MD102C Control Unit operates on a 12/24Vdc power input, providing flexibility for various installation environments. Manufactured by Procon Electronics, the MD102-C kit guarantees quality and reliability, ensuring consistent performance for your vehicle detection needs. Whether you need presence detection or pulse detection, this system has you covered. Options PROCON MD102C-CONTROLLER & MD102-PROBE (FULL KIT) PROCON MD102C-CONTROLLER ONLY PROCON MD102-PROBE ONLY Technical Specifications FeatureSpecification Power Input 12/24Vdc MD102C Control Unit 12/24VAC/DC, 50/60Hz, 30mA Cable Length 15 meters

PROCON ELECTRONICS PROCON LD-100 / LD-102 | Induction Loop Controller and Loop Detector | Single Channel (230V/24V)

Product Overview The PROCON LD-100/LD-102 is a single channel induction loop controller and detector designed for parking and access control applications. This reliable and efficient detector is connected to an inductive loop mounted in the road surface, which activates the detector when vehicles pass over it, switching on an output. Key Features Single channel induction loop detector for parking and access control Compatible with most single channel detectors on the market Easy to set-up and install Utilizes microprocessor and surface mount technology Compact design with a large number of functions 2-year guarantee for peace of mind Product Description The PROCON LD-100/LD-102 induction loop controller is an ideal solution for parking and access control applications, offering reliable performance and ease of installation. When connected to an inductive loop installed in the road surface, the detector activates an output when vehicles pass over the loop. This functionality makes it a perfect choice for managing vehicle access and parking systems. The LD-100/LD-102 uses advanced microprocessor and surface mount technology to pack numerous functions into a compact package. This ensures compatibility with most single channel detectors available on the market, making it a versatile addition to your access control system. Installation and setup are straightforward, allowing for quick deployment in various environments. With a 2-year guarantee, you can trust in the durability and reliability of the PROCON LD-100/LD-102. Technical Specifications Model: LD-100 / LD-102 Type: Single channel inductive loop detector Power Supply: 230V / 24V Compatibility: Compatible with most single channel detectors Technology: Microprocessor and surface mount technology Installation: Easy to set up and install Warranty: 2-year guarantee Recommendation It is recommended to use one loop detector per separate entrance or exit to ensure optimal performance and reliability in your parking and access control systems.

BFT 500m roll of loop cable

BFT 500m roll of loop cable

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

BFT SFR-B Standard Stroke Post Bracket

SFR-B STANDARD STROKE POST BRACKET Adjustable non-weld bracket for standard stroke motors

BFT SFR-B-L Long Stroke Post Bracket

SFR-B-L LONG STROKE POST BRACKET Adjustable non-weld bracket for long stroke motors.    

Fadini ELPRO 62 | Control Panel | 24V for JUNIOR 624 Gates

Product Overview The Fadini ELPRO 62 Control Panel is a 24V electronic programmer designed for the JUNIOR 624 gate operators. This control panel offers comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. The panel operates on a single phase power supply, ensuring reliable performance and ease of installation. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO 62 Control Panel enhances the functionality and safety of the JUNIOR 624 gate operators. This 24V electronic programmer supports precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 62, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 200 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 24 V DC/AC flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Motor run time: - Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 63 | Control Panel | Single Phase for JUNIOR 633 and 650

Product Overview The Fadini ELPRO 63 Control Panel is an advanced electronic programmer designed for the JUNIOR 633 and 650 gate operators. This control panel provides comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 63 Control Panel is designed to enhance the functionality and safety of the JUNIOR 633 and 650 gate operators. This single phase electronic programmer offers precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 63, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 375 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 230 V - 25W max flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Motor run time: - Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO 980 | Control Panel | Single Phase for BAYT 980 Barriers

Product Overview The Fadini ELPRO 980 Control Panel is an advanced single phase electronic controller specifically designed for the BAYT 980 barriers. This control panel offers a range of functions to ensure smooth and efficient barrier operation, including step-by-step function, deadman (hold on switched) control, and both automatic and semiautomatic modes of operation. It is also preset to operate two synchronized barriers simultaneously (Master/Slave). Key Features Step-by-step function for precise control Deadman (hold on switched) control for safety Automatic and semiautomatic modes of operation Preset to operate two synchronized barriers simultaneously (Master/Slave) Connector for traffic light control card with 2/3 lights External time clock for preset opening and closing times Designed for BAYT 980 barriers Product Description The Fadini ELPRO 980 Control Panel is engineered to provide reliable and efficient control for BAYT 980 barriers. This single phase controller supports a variety of operational modes, including step-by-step function and deadman (hold on switched) control. These features ensure precise and safe barrier operation in various scenarios. The control panel offers both automatic and semiautomatic modes of operation, allowing flexibility to meet different user requirements. It is also preset to handle two synchronized barriers simultaneously, functioning as a master/slave system. This makes it an ideal solution for complex barrier installations where coordinated movements are necessary. The ELPRO 980 is equipped with a connector to accommodate a control card for traffic lights with 2/3 lights, further enhancing its versatility. Additionally, an external time clock allows for preset opening and closing operations, providing convenience and efficiency in managing barrier schedules. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: - Photocells/Keyswitch/Radio receiver output: - Pilot light output: - DSA control output: - Flasher output: - Motor run time: - Dwell time: - Box dimensions: - Protection standards: - Working temperature: -

Fadini ELPRO 12 EVO | Control Panel | Single Phase for NYOTA 115 EVO

Product Overview The Fadini ELPRO 12 EVO Control Panel is an advanced single phase electronic controller specifically designed for the NYOTA 115 EVO range of motor operators. This control panel is built to provide reliable and efficient control of gate operations, ensuring smooth and precise movements. It features multiple outputs and a range of programmable functions to suit various operational needs. Key Features Specifically designed for the NYOTA 115 EVO range of motor operators Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 12 EVO Control Panel is tailored to manage the NYOTA 115 EVO motor operators efficiently. It operates on a single phase power supply of 230 V ±10% at 50 Hz, providing a robust solution for gate automation. With a maximum motor power capacity of 750 W, it ensures powerful and reliable performance. This control panel includes several output options for enhanced functionality. The courtesy light output supports up to 230 V - 100 W for a maximum of 3 minutes, while the photocells/keyswitch/radio receiver output offers 24 V DC with a maximum of 500 mA. Additionally, the pilot light output provides 24 V DC - 3W max, and the flasher output supports 230 V DC/AC. The ELPRO 12 EVO allows for precise control over gate operation timings, with dwell times ranging from 2 to 128 seconds and pedestrian opening times adjustable between 2 to 30 seconds. It is designed to operate within a temperature range of -20°C to +55°C, making it suitable for various environmental conditions. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Motor run time: - Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO S40 | Control Panel | Single Phase, Max 4 Automatic Bollards

Product Overview The Fadini ELPRO S40 Control Panel is a single phase electronic controller designed to manage up to 4 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 4 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S40 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to four bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S40 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 2400 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 37 | Control Panel | Single/Three-Phase for Sliding Gates

Product Overview The Fadini ELPRO 37 Control Panel is a versatile electronic controller designed for sliding gates. It supports both single and three-phase applications, making it suitable for various installation needs. The control panel incorporates an electronic brake for enhanced performance and reliability. It features multiple outputs and a range of programmable functions to ensure smooth and efficient gate operation. Key Features Supports single and three-phase applications Incorporated electronic brake for improved control Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description The Fadini ELPRO 37 Control Panel is designed to provide reliable and efficient control for sliding gates. This electronic controller supports both single and three-phase applications, accommodating various power supply configurations. The integrated electronic brake enhances the control and safety of gate operations, ensuring smooth and precise movements. The control panel features a single phase PCB power supply (230 V ±10% 50/60 Hz) and a three-phase PCB power supply (400 V ±10% 50/60 Hz), allowing flexibility in installation. It supports motors with a maximum power of 750 W for single-phase and 1200 W for three-phase applications. The panel includes outputs for courtesy lights, photocells, keyswitch, radio receiver, pilot light, and DSA control, providing comprehensive control options. The motor run time is adjustable between 0 to 120 seconds, while the dwell time ranges from 1 to 220 seconds, and the pedestrian opening time is adjustable from 1 to 45 seconds. The control panel is housed in a compact box with dimensions of 210 x 295 x 110 mm, ensuring easy installation and integration. It is built to IP64 protection standards, making it suitable for various environmental conditions, and operates effectively in temperatures ranging from -20°C to +55°C. Specifications Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO S20 | Control Panel | Single Phase, Max 2 Automatic Bollards

Product Overview The Fadini ELPRO S20 Control Panel is a single phase electronic controller designed to manage up to 2 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 2 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S20 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to two bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S20 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 1200 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

CAME ZLX24SA | Control Panel (PCB only) | CNX BUS, Adaptive Speed, 1000 Users

Product Overview The CAME ZLX24SA Control Panel (PCB only) is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel (PCB only) is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

BPT UK XDV/304 - Video Distributor - 4 Outputs, System X1-XIP | DIN Mountable | Busline Powered

Product Overview The BPT XDV/304 - Video Distributor is designed to enhance door entry installations using the X1 two-wire cabling system by distributing modulated video signals to multiple video monitors. This video distributor is essential when connecting two or more video monitors, ensuring that each display receives adequate video quality. Key Features Busline Powered: The unit is powered directly from the busline, eliminating the need for an additional power supply and simplifying installation. DIN Mountable: The compact design allows for easy installation on a single DIN guide or in a regular connector box. Multiple Connections: Features eight input terminals, four for connection to video monitors via twisted pair and four for in/out connection from the riser. Product Description The XDV/304 - Video Distributor is a critical component for any BPT door entry installation using the X1-XIP system. It effectively distributes modulated video signals to up to four video monitors, ensuring each monitor displays high-quality video. The unit features eight input terminals: four for twisted pair connections to video monitors and four for in/out connections from the riser. Powered directly from the busline, the XDV/304 eliminates the need for an external power supply, saving space and reducing installation time. Its compact size allows it to be installed in a standard connector box or mounted on a single DIN guide, providing flexible installation options. With minimal pass-video loss and significant video output attenuation, this distributor ensures reliable performance and high-quality video distribution in your door entry system. Technical Specifications Pass-Video Loss: 0.6 dB input/output Video Outputs Attenuation: 20 dB per output Working Temperature: 0 to +35°C Dimensions 44 x 60 x 16 (hw mm)

BPT UK VAS/101 - Power Supply, System X1-XIP | DIN Mount Housing | Self-Resetting Thermal Switch

Product Overview The BPT VAS/101 is a reliable power supply unit designed for use in two-wire BPT door entry systems, specifically for System X1-XIP. This unit is equipped with a circuit board that powers the panel and audio handsets, ensuring efficient and consistent operation. The VAS/101 features a self-resetting thermal switch for robust protection against overloading and short circuits, making it a durable and safe choice for your door entry system. Key Features DIN Mount Housing: Designed for easy installation in an electronic cupboard or on a size four DIN rail. Self-Resetting Thermal Switch: Protects against overloading and short circuits, ensuring safety and reliability. Efficient Power Distribution: Powers the panel and audio handsets in two-wire BPT door entry systems. Product Description The VAS/101 - Power Supply is an essential component for BPT's two-wire door entry systems, specifically designed for the System X1-XIP. This power supply unit is housed in a DIN mount casing, allowing for flexible installation options, including mounting in an electronic cupboard or on a size four DIN rail without terminal covers. The unit features a self-resetting thermal switch, providing reliable protection against overloading and short circuits, ensuring the longevity and safety of your system. Equipped with a circuit board, the VAS/101 efficiently powers the panel and audio handsets, making it an integral part of your door entry system. Its robust construction and reliable performance make it suitable for various residential and commercial applications, ensuring your entry system remains fully operational. Technical Specifications Mains Supply: 230 V AC 50/60 Hz Output Voltage: 17.5 V DC Working Temperature: -25 to +70°C Dimensions 106 x 70 x 64.5 (hwd mm)

BPT UK VAS/100.30 - Power Supply, System X1-XIP | Short Circuit Protection | Self Resetting Safety Switch

Product Overview The BPT VAS/100.30 is a reliable and efficient power supply unit designed for use with video entry installations in BPT's System X1-XIP. This 50 VA power supply is compatible with system 300 wiring type and can be used as a supplementary power source to ensure seamless operation of your video entry system. Key Features Short Circuit Protection: Equipped with a self-resetting thermal switch that protects the unit from overloading and short circuits. Self Resetting Safety Switch: Ensures continuous protection and automatic recovery from faults. Flexible Installation: Can be installed on DIN rails with terminal covers or wall-mounted, providing versatile installation options. Product Description The VAS/100.30 - Power Supply is a crucial component for maintaining the efficiency and reliability of your BPT video entry system. Designed to work seamlessly with System X1-XIP, this 50 VA power supply ensures that your video entry installations remain fully functional. The unit features a self-resetting thermal switch that offers robust protection against overloading and short circuits, ensuring the safety and longevity of your system. The power supply can be easily installed on DIN rails using the provided terminal covers or wall-mounted to suit various installation requirements. Its compact design and durable construction make it an ideal choice for both residential and commercial applications, providing a reliable power source for your video entry system. Technical Specifications Mains Supply: 230 V AC 50/60 Hz Output Voltage: 17.5 V DC Working Temperature: 0 to 35°C Dimensions Not specified

BPT UK VA/08 - System Controller and Power Supply, System XIP | Control Unit & PSU | DIN Rail Mountable

Product Overview The BPT VA/08 is a comprehensive control unit and power supply module designed specifically for XIP systems. This module is housed in a durable plastic casing, suitable for installation in electrical control panels (EN50022). It occupies 12 low-profile DIN modules and carries a protection rating of IP30. Key Features Power Supply Module: Designed for video entry panels in XIP systems. Durable Housing: Plastic housing for installation in electrical control panels (EN50022). DIN Rail Mountable: Occupies 12 low-profile DIN modules for efficient installation. Protection Rating: IP30 for reliable performance. Advanced Connectivity: Terminals for control of riser bus and connection of audio/video/bus for up to 4 entry panels. Programming Ports: RS232 serial ports and mini USB for programming from a PC, with LED indicators for connection and data transfer. Auxiliary Functions: Open-collector outputs for AUX1 and AUX2 functions. Manual Programming: Manual system programming button with indicator LED and jumper for access control programming (cards and keys). Overload Protection: Electronic circuit-breaker for protection against overloads and short-circuits. Product Description The VA/08 - System Controller and Power Supply is an essential component for managing and powering XIP systems. This module is specifically designed for video entry panels, providing robust and reliable control and power distribution. Encased in a plastic housing, it is ideal for installation in electrical control panels, occupying 12 low-profile DIN modules and offering an IP30 protection rating. The VA/08 features advanced connectivity options, including terminals for controlling the riser bus and connections for an audio/video/bus for up to four entry panels. It is equipped with RS232 serial ports and a mini USB port for easy programming from a PC, with LED indicators to show connection and data transfer status. The module also includes open-collector outputs for auxiliary functions (AUX1 and AUX2), a manual system programming button with an indicator LED, and a jumper for programming access control devices (cards and keys). An electronic circuit-breaker provides protection against overloads and short-circuits, ensuring the safety and reliability of the system. Powered by a mains circuit of 230V AC 50/60 Hz, the VA/08 is a versatile and indispensable control unit and power supply for XIP systems. Technical Specifications Control of Entry Panels: 18V DC - 1.1 A max Control of Video Entry System Riser: 20V DC - 0.8 A max Overload Protection: Electronic circuit-breaker Connectivity: Terminals for riser bus and audio/video/bus for up to 4 entry panels Auxiliary Functions: Open-collector outputs (AUX1 and AUX2) Programming Ports: RS232 serial ports and mini USB Manual Programming: Manual programming button with LED indicator Power Supply: 230V AC 50/60 Hz Dimensions: 12 low-profile DIN modules Protection Rating: IP30 Storage Temperature: -25 to +70°C Operating Temperature: 0 to +35°C

BPT UK VA/01 - System Controller and Power Supply, System X1 | RS232 & USB Programming | DIN Rail Mountable

Product Overview The VA/01 - System Controller and Power Supply is designed for BPT's X1 cabling system, supporting both audio and video systems. This module features RS232 serial ports and a mini USB port for programming from a PC, along with LED indicators that signal connection and data transfer status. The power supply can be manually set up using the programming button and jumpers located on the device, providing flexibility and ease of use. Key Features Power Supply Voltage: 230 V AC, suitable for a wide range of applications. Programming Ports: Equipped with RS232 serial ports and a mini USB port for easy programming from a PC. Manual Setup: Features a programming button and jumpers for manual setup and access control programming. Mounting Options: Can be installed on a DIN rail, in an electrical panel, or wall-mounted using protective terminal covers. Must be installed horizontally. LED Indicators: Provide clear indication of connection and data transfer status. Product Description The VA/01 - System Controller and Power Supply is an essential component for any BPT X1 cabling system, providing reliable power for both audio and video systems. This versatile power supply module includes RS232 serial ports and a mini USB port for easy programming from a PC, with LED indicators to signal connection and data transfer. The device can be manually set up using the designated programming button and jumpers, allowing for straightforward access control programming. Designed for flexible installation, the VA/01 can be mounted on a DIN rail, within an electrical panel, or wall-mounted using protective terminal covers. Please note that the power supply must always be installed horizontally to ensure optimal performance. Technical Specifications Power Supply Voltage: 230 V AC Frequency: 50 / 60 HZ Storage Temperature: -25 to +70°C Operating Temperature: 0 to +35°C Dimensions Not specified

BPT UK R/1 - Door Relay 8 to 24v AC or DC | 1 Input, 2 Outputs | Auxiliary Relay with Clean Contacts

Product Overview The BPT R/1 is an auxiliary relay unit designed with versatility in mind, featuring two clean contacts for operating locking devices or facilitating auxiliary functions from an indoor monitor. This relay unit is equipped with a jumper switch, allowing it to operate at various voltages. It also includes a status LED to indicate normal operation, housed in a durable plastic casing suitable for installation in an electrical cupboard. Key Features Clean Contacts: Features two clean contacts for reliable operation. Versatile Voltage Operation: Operates at 8 - 28 V DC or 8 - 24 V AC, adjustable via jumper switch. Status LED: Indicates normal operation status for easy monitoring. Durable Housing: Enclosed in a plastic casing for safe installation in electrical cupboards. Product Description The BPT R/1 - Door Relay is a versatile auxiliary relay unit, ideal for controlling locking devices or performing auxiliary functions from an indoor monitor. It features two clean contacts and can operate at a wide range of voltages, thanks to its jumper switch. The unit includes a status LED to indicate its normal operation, making it easy to monitor. Encased in a durable plastic housing, the R/1 relay is designed for safe and secure installation in electrical cupboards. This flexibility and ease of use make it an excellent choice for various applications in both residential and commercial settings. Technical Specifications Supply Voltage: 8 - 28 V DC or 8 - 24 V AC Relay Outputs: 2 rated at 2 Amps/24 V or 1 Amp/120 V Dimensions 40 x 60 x 25 mm (hwd)