Control Board for BENINCA BILL Motors

CAME ZLX230P 230v Multifunction control panel

801QA-0110 - ZLX230P Basic version multifunction control panel, with 230 V AC power supply, for 230 V double-leaf swing gates, with programming and signaling display, self-diagnosis of safety devices, Digital Torque Control, 2 safety inputs and storage for up to 250 users . Technical data Power supply (V – 50/60 Hz) 220 AC ÷ 240 AC Power supply to motor (V) 220 AC ÷ 240 AC Power (W) 1100 Stand-by consumption (W) 0,8 Operating temperature (°C) -20 ÷ +55 Protection rating (IP) 54

GIBIDI BA24 Control Panel | AS06300 | For GROUND624, ART5024, AUTOBOX3024

Product Overview BA24 - Control Panel (AS06300) is a versatile control unit compatible with GROUND624, ART5024, and AUTOBOX3024. Key Features Supports 1 or 2 engines on 24 Vdc (max. 150W) Compatible with GROUND, ART, and AUTOBOX swing gates Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc (max. 150W) Power supply 220-230 Vac Swing gates GROUND, ART Sliding gates YES Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA100 Control Panel | AS05060 | For Various Gate and Door Operators

Product Overview BA100 - Control Panel (AS05060) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, GROUND610, BL233, ART5000, MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 engine on 230 Vac (max. 700W), 2 engines in parallel only Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 on 230 Vac (max. 700W), 2 engines in parallel only Power supply 220-230 VAC Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian NO Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (2) Type of programming Analog Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA230 Control Panel | AS05581 | For Various Gate and Door Operators

Product Overview BA230 - Control Panel (AS05581) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, TOUCHE126, TOUCHE276, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BE24 Control Panel | AS06250 | For KUDA, AGO424E, AGO624E, SNAPPER, SERRA320

Product Overview BE24 - Control Panel (AS06250) is a versatile control unit with an embedded radio receiver compatible with KUDA, AGO424E, AGO624E, SNAPPER, and SERRA320 swing gates. Key Features Supports 1 or 2 engines on 24 Vdc Compatible with KUDA, AGO, SNAPPER, and SERRA swing gates Force adjustment and slowdown features Safety device and photocell input Encoder or time logic limit switches Electric lock compatibility Embedded radio receiver IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc Power supply 220-230 Vac Swing gates KUDA, AGO, SERRA, SNAPPER Sliding gates NO Overhead or sectional doors NO Barriers NO Bollards NO Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Encoder or time logic Type of programming Analog with leaf-learning Electric-lock YES Embedded radio receiver YES Protection degree IP 55

GIBIDI F4 Control Panel | AS06320 | For Various Gate and Door Operators

Product Overview F4 - Control Panel (AS06320) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES

CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

Product Overview The CAME ZA5 is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement is ideal for those looking to replace a damaged or malfunctioning ZA5 control panel. With a power supply of 230V and a protection rating of IP54, the ZA5 control panel ensures reliable and efficient operation of your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA5 control panel. Compatible with one or two CAME 230V operators. 230V power supply for robust performance. IP54 protection rating for durability and resistance to environmental factors. Product Description CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA5 control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA5 control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA5 control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. Whether you are replacing a damaged control panel or upgrading your gate automation system, the CAME ZA5 control panel (PCB only) is a dependable choice. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators Note: Images may differ from the actual product. The CAME ZA5 control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

LIMITED STOCK AVAILABLE   Product Overview The CAME ZA3P is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement features limit-switch control and slow-down speed adjustment, ensuring smooth and precise gate operation. With a power supply of 230V and a protection rating of IP54, the ZA3P control panel provides reliable and efficient performance for your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA3P control panel. 230V power supply for robust performance. Limit-switch control for precise gate operation. Slow-down speed adjustment for smooth movements. IP54 protection rating for durability and resistance to environmental factors. Compatible with one or two CAME 230V operators. Product Description CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA3P control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA3P control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA3P control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. The limit-switch control and slow-down speed adjustment features ensure precise and smooth gate movements, enhancing the overall performance and safety of your gate system. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators The CAME ZA3P control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZL65 | Control Panel for Two-Leaf Swing Gates | LCD Display, IP54

Product Overview The CAME ZL65 Control Panel is a multifunctional solution designed for two-leaf swing gates. This advanced control panel features an LCD display for easy function programming, signaling, and self-diagnosis of safety devices. The ZL65 has been completely overhauled to ensure higher quality and easier settings. With its memory roll feature, you can save and copy settings to other operators, streamlining the setup process. The control panel includes color-coded terminals for straightforward wiring and installation. Key Features Designed for two-leaf swing gates LCD display for function programming, signaling, and self-diagnosis Memory roll for saving and copying settings to other operators Color-coded terminals for easy wiring and installation Compatible with a range of CAME transmitters Includes dedicated Green Power module and CONNECT GW gateway Allows connection to GSM, WiFi, or LAN networks for remote management via CAME CONNECT Protection rating of IP54 Product Description Specifications Motor Voltage: 24v Protection Rating: IP54 The CAME ZL65 Control Panel is designed to offer comprehensive control and management for two-leaf swing gates. The multifunctional control panel is equipped with an LCD display that facilitates easy programming of functions, signaling, and performing self-diagnosis on safety devices. This control panel has been overhauled to improve quality and simplify the settings process. One of the standout features of the ZL65 is the memory roll, which allows users to save and copy settings to other operators, making it an efficient tool for managing multiple gates. The color-coded terminals further enhance the ease of installation, ensuring a hassle-free setup process. The ZL65 control panel is compatible with a variety of CAME transmitters and includes the dedicated Green Power module and CONNECT GW gateway. This gateway module kit enables the operator to connect to GSM, WiFi, or LAN networks, allowing for remote management through CAME CONNECT. This feature is particularly useful for operators who need to manage gate settings and operations remotely. The control panel is housed in an enclosure with an IP54 protection rating, ensuring durability and resistance to environmental factors such as dust and water. This makes the CAME ZL65 a reliable and robust solution for controlling two-leaf swing gates in various settings. NOTE: Images may differ from the actual product.

CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL60 is a versatile control panel designed for one or two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features functions set by dip-switches and adjusted by trimmers, ensuring precise and customizable control. It is set up for connecting the RGP1 module to reduce energy consumption and the RLB card for emergency operation and battery recharging. All connections and links are rapid-fuse protected for added safety and reliability. Key Features Control panel for one or two-leaf swing gates. Includes enclosure and lid for complete protection. Functions set by dip-switches and adjusted by trimmers. Compatible with RGP1 module for reducing energy consumption. Supports RLB card for emergency operation and battery recharging. Rapid-fuse protected connections and links. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with AXL and FTL motor ranges. Product Description CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid The CAME ZL60 control panel is designed to provide reliable and efficient automation for one or two-leaf swing gates. With functions set by dip-switches and adjusted by trimmers, this control panel allows for precise customization to meet your specific needs. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is set up for connecting the RGP1 module, which helps reduce energy consumption, and the RLB card, which provides emergency operation and battery recharging capabilities. The rapid-fuse protected connections and links add an extra layer of safety, ensuring reliable operation. Compatible with the AXL and FTL motor ranges, the CAME ZL60 control panel is a versatile and dependable choice for your gate automation system. Technical Specifications SpecificationDetails Motor Voltage 24V Protection Rating IP54 Motor Range AXL, FTL The CAME ZL60 control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for one or two-leaf swing gates.

CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL92Z is a multifunction control panel designed for two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features an LCD display for function programming, signalling, and self-diagnosis of safety devices, ensuring precise and user-friendly control. With a power supply of 24V and a protection rating of IP54, the ZL92Z control panel ensures reliable and efficient operation of your gate system. Key Features Multifunction control panel for two-leaf swing gates. Includes enclosure and lid for complete protection. LCD display for function programming, signalling, and self-diagnosis of safety devices. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with Amico and Stylo motor ranges. Product Description CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid The CAME ZL92Z control panel is designed to provide reliable and efficient automation for two-leaf swing gates. With an LCD display for function programming, signalling, and self-diagnosis of safety devices, this control panel allows for precise customization and user-friendly control. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is compatible with the Amico and Stylo motor ranges, making it a versatile and dependable choice for your gate automation system. With a 24V motor voltage and an IP54 protection rating, the CAME ZL92Z control panel is built to withstand various environmental conditions while delivering consistent performance. Technical Specifications SpecificationDetails Power Supply 24V Motor Voltage 24V Protection Rating IP54 Compatibility For use with one or two CAME 24V operators with self-diagnosis Motor Range Amico, Stylo The CAME ZL92Z control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

LOCINOX S-MAG | Integrated Magnet Lock for Sliding Gates | 250kg Holding Force

Product Overview The S-MAG is an integrated magnet lock designed specifically for sliding gates, offering robust security and reliability. With a guaranteed tensile strength of 250 kg, this magnet lock ensures secure locking under various conditions. It is built to withstand extreme weather, and its rubber bumpers protect the gate and accessories from damage due to harsh handling. The flexible assembly of the armature plate guarantees proper closing even if the gate is not perfectly aligned, making it an ideal choice for sliding gates. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Minimal pulling force: 2500N (250 kg) Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Product Description The S-MAG integrated magnet lock is the perfect solution for securing sliding gates. Its robust construction and guaranteed holding force of 250 kg ensure reliable performance in various conditions. The magnet lock is tested to withstand 500 hours of salt spray, certified by SGS (ISO 9227), making it suitable for harsh outdoor environments. The special two-layer protective coating further enhances its durability, while the anti-residual magnetism kick-off system ensures efficient operation. Installation and Usage Installing the S-MAG magnet lock is straightforward, with compatibility for both 12V and 24V DC power sources. The lock's rubber bumpers prevent gate shaking and damage, ensuring smooth operation even under harsh handling. The flexible armature plate assembly guarantees proper closing, even if the gate is not perfectly aligned. These features make the S-MAG an ideal choice for enhancing the security and functionality of sliding gates. Durability and Protection The S-MAG magnet lock is built to endure extreme weather conditions, with a robust construction that includes a special two-layer protective coating. Its SGS-certified salt spray resistance ensures longevity and reliability in outdoor use. The rubber bumpers and anti-residual magnetism system further enhance the lock's durability, providing a secure and efficient solution for sliding gate applications.

Locinox LGKZ D1 | Double Cylinder Gate Lock | Sliding Gates

Product Overview The Locinox LGKZ D1 - Double Cylinder Gate Lock is an industrial-grade lock designed specifically for sliding gates. Featuring a robust aluminum housing and a durable stainless steel mechanism, this lock provides high security and reliability. It is equipped with two cylinders, allowing the lock to be opened or closed using either cylinder. This feature makes it ideal for granting access to third parties such as firemen or waste collectors. Key Features Double cylinder gate lock for sliding gates Aluminum housing with stainless steel mechanism Can be operated using either of the two cylinders ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test Compatible with gate profiles from 40 to 120 mm depth Adjustable for horizontal or vertical mounting of the keep (catch bolt) Innovative closing system Stainless steel collar around the Twistfinger prevents cutting through the Twistfinger (catchbolt) 3-hole fixing with two hexagon socket head screws Exchangeable with Locinox LS-Locks Standard with reinforced aluminum handle pair Product Description The Locinox LGKZ D1 Double Cylinder Gate Lock offers robust security for industrial sliding gates. Its aluminum housing and stainless steel mechanism ensure durability and longevity, while the dual cylinder design provides versatile access control. The lock's innovative closing system and adjustable mounting options make it suitable for a variety of gate installations. Additionally, the stainless steel collar around the Twistfinger enhances the lock's resistance to tampering and cutting, ensuring maximum security. Specifications Lock Box: ISO 9227 KTL / E-coated, withstands 1000 hours of salt spray test Gate Profiles: For profiles from 40 to 120 mm depth Mechanism and Twistfinger: Stainless steel Mounting: Adjustable for horizontal or vertical mounting of the keep (catch bolt) Closing System: Innovative design Twistfinger Collar: Stainless steel collar prevents cutting through the Twistfinger (catchbolt) Fixing: 3-hole fixing with two hexagon socket head screws Compatibility: Exchangeable with Locinox LS-Locks Handle: Standard with reinforced aluminum handle pair Installation and Usage Installing the Locinox LGKZ D1 is straightforward, with adjustable options for both horizontal and vertical mounting of the keep (catch bolt). The lock is compatible with gate profiles ranging from 40 to 120 mm in depth. The 3-hole fixing system, along with two hexagon socket head screws, ensures a secure installation. The lock can be operated using either of the two cylinders, making it convenient for authorized third parties to gain access when necessary. Durability and Protection The lock box is ISO 9227 KTL / E-coated, providing resistance to corrosion and ensuring durability even in harsh environmental conditions. The stainless steel mechanism and Twistfinger further enhance the lock's robustness. The innovative closing system and the anti-cutting stainless steel collar around the Twistfinger offer additional security against tampering and unauthorized access.

Locinox LLKZ V2 | LEONARDO Mechanical Code Lock | Sliding Gates

Product Overview The Locinox LLKZ V2 - LEONARDO is a premium mechanical code lock specifically designed for sliding gates. With its aluminum housing and stainless steel mechanism, this lock offers durability and reliable performance. The system requires no electricity or batteries, allowing for easy and quick installation on any sliding gate. The unique Twistfinger and self-correcting keep ensure perfect alignment and secure closing of your gate. Key Features 100% mechanical: no battery or electricity required Adjustable for horizontal or vertical mounting of the keep (catch bolt) Mechanical code panel on both sides Possibility to work with different entrance and exit codes Equipped with dust and rain covers Easy and fast set-up or modification of the access codes Possibility of setting up 4 to 6 digit codes Extremely strong and user-friendly mechanism Automatic code reset after pushing the handle Anti-code detection with integrated security press plate Stainless steel collar around the Twistfinger prevents cutting through the Twistfinger (catchbolt) Product Description The Locinox LLKZ V2 - LEONARDO Mechanical Code Lock offers a robust and efficient solution for securing sliding gates. Its aluminum housing and stainless steel mechanism ensure long-lasting durability, while the mechanical operation means no dependency on batteries or electricity. The Twistfinger and self-correcting keep provide seamless alignment and secure locking every time. Installation and Usage Installing the Locinox LLKZ V2 is straightforward, especially with the recommended Drill-Fix drilling caliber for precise installation. The lock is adjustable for both horizontal and vertical mounting, making it versatile for different gate designs. The mechanical code panel on both sides allows for different entrance and exit codes, enhancing security and convenience. Durability and Protection The lock is equipped with dust and rain covers, ensuring reliable performance in various weather conditions. The stainless steel collar around the Twistfinger offers additional protection against tampering, making the lock extremely strong and secure. The anti-code detection feature with an integrated security press plate adds an extra layer of security.

ROLLING CENTRE Medium Kit 9 | Cantilever Gates Up to 5m Opening & 600kg Weight

Product Overview The Medium Kit 9 is designed for cantilever gates with clear openings up to 5m and a maximum weight of 600kg. Cantilever gate systems are widely chosen in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need to lay a track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 5m Supports gates up to 600kg No track to lay Limited ground work needed Lower cost of labor Reduced maintenance Capable of intensive use Sleek finish Product Description The Medium Kit 9 cantilever gate system provides a practical and efficient solution for managing large and heavy gates. Designed to support gates up to 5m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation, even in settings with uneven ground or limited space for ground work. Cantilever gate systems are known for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Medium Kit 9 includes the following components: 1 x 3m GIPI 5RG3 Galvanised Track 1 x 4.5m GIPI 5RG4.5 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 9 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 6 | Silent Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 6 Silent Kit is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. Key Features Clear gate openings up to 8m Supports gates up to 600kg 35% less noise with silent cantilever systems No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 6 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Medium Kit 6 includes the following components: 2 x 4.5m GIPI 5 RGZ4.5 Galvanised Track, supplied in 2 x 4.5 metre lengths 2 x Silent G Medium 8-wheeled cantilever carriages with MAPAR wheels 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Silent G Carriage Drawing Silent G Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 6 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 5 | Silent Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 5 Silent Kit is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. Key Features Clear gate openings up to 8m Supports gates up to 600kg 35% less noise with silent cantilever systems No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 5 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Medium Kit 5 includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 1 x 3m GIPI 5 RGZ3 Galvanised Track 2 x Silent G Medium 8-wheeled cantilever carriages with MAPAR wheels 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Silent G Carriage Drawing Silent G Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 5 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 4 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 4 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 4 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 4 includes the following components: 3 x 3m GIPI 5 RGZ3 Galvanised Track, supplied in 3 x 3m tracks 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 4 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 3 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 3 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 3 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 3 includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 2 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 2 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 2 includes the following components: 2 x 4.5m GIPI 5 RGZ4.5 Galvanised Track, supplied in 2 x 4.5 metre lengths 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 4 | Cantilever Gates Up to 6m Opening & 450kg Weight | Non-Galvanised Track

Product Overview The Mini Kit 4 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features a non-galvanised track, providing an economical option for various applications. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track in the ground, minimal ground work required, lower labor costs, less maintenance, and suitability for intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg No requirement to lay track in the ground Minimal ground work required Lower cost of labor Less maintenance Suitable for intensive use Aesthetically pleasing finish Product Description The Mini Kit 4 cantilever gate system offers a reliable and cost-effective solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a practical and economical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 4 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI4RP6 mini cantilever track, non-galvanised Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 4 are constructed from high-grade materials to ensure durability and longevity. While the track is non-galvanised, the remaining components feature a galvanized finish, providing additional protection against corrosion and making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 3 | Silent Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 3 Silent Kit is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Silent cantilever gate systems are widely used in commercial, public sector, and residential environments due to their many benefits over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg 35% less noise with silent cantilever systems No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 3 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Mini Kit 3 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI 4 RPZ6 track made from S280GD structural grade steel Specifications: Silent P Carriage Drawing Silent P Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 2 | Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 2 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 6m Supports gates up to 450kg No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 2 includes the following components: 1 x 6m GIPI 4 RPZ6 Galvanised Track made from S280GD structural grade steel 2 x CA4RPS Mini 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41B/S Mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 2 x 50B Meeting Points made from 235 structural grade steel with a galvanized finish Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

DEA IRONBOX Vandal-proof Box for REV and GULLIVER with Magnetic Limit Switch and Foundation Plate (IRONBOX, IRONBOX/XS)

Product Overview The IRONBOX and IRONBOX/XS vandal-proof boxes are designed to protect sliding gate motors and their electronic components. Suitable for collective sliding gates (REV in the IB version) and industrial sliding gates (GULLIVER in the IB version), these boxes offer robust protection and an elegant design. The IRONBOX/XS is compact, making it ideal for installations with limited space or requiring a specific design aesthetic. Key Features Vandal-proof design made of steel Equipped with a magnetic limit switch for precise stopping Customized access key for added security Spacious interior for easy installation and maintenance Essential design for clean and tidy installations Product Description The IRONBOX series offers unparalleled protection for your gate automation systems. Made from painted steel, these boxes are designed to prevent tampering and vandalism, ensuring that your motors and electronic components remain safe. The customized access key adds an extra layer of security, making unauthorized access nearly impossible. Both IRONBOX and IRONBOX/XS come with a magnetic limit switch, which ensures accurate stopping during both opening and closing operations. The larger IRONBOX model provides ample working space for complex installations and maintenance, while the IRONBOX/XS is tailored for simpler installations with its compact size of only 36 cm wide, 60 cm high, and 22 cm deep. Installation is straightforward, with a significant working area in the IRONBOX and adequate room in the IRONBOX/XS for professional maneuvering during setup and maintenance. Both models include an internal fixing plate for organizing the control panel and electronic devices, ensuring a practical, fast, and orderly setup. Product Guide Product CodeProductDescription 619080 IRONBOX RAL 9006 painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 594 x 1002 x 280 mm (without pinion). 619100 IRONBOX/XS Painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 359 x 607 x 219 mm (without pinion). Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP)

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP) PRODUCT DESCRIPTION SOFT3 Safety black rubber profile (complete with aluminium base) useful to reduce the impact forces for sliding and swing gates (12m) SOFTP Black rubber and aluminium profile useful to reduce the impact forces for overhead doors (24m) GSOFTP Black rubber profile, EPDM S65 (24m)  

FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

Fadini ELPRO 62 | Control Panel | 24V for JUNIOR 624 Gates

Product Overview The Fadini ELPRO 62 Control Panel is a 24V electronic programmer designed for the JUNIOR 624 gate operators. This control panel offers comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. The panel operates on a single phase power supply, ensuring reliable performance and ease of installation. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO 62 Control Panel enhances the functionality and safety of the JUNIOR 624 gate operators. This 24V electronic programmer supports precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 62, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 200 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 24 V DC/AC flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Motor run time: - Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 63 | Control Panel | Single Phase for JUNIOR 633 and 650

Product Overview The Fadini ELPRO 63 Control Panel is an advanced electronic programmer designed for the JUNIOR 633 and 650 gate operators. This control panel provides comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 63 Control Panel is designed to enhance the functionality and safety of the JUNIOR 633 and 650 gate operators. This single phase electronic programmer offers precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 63, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 375 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 230 V - 25W max flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Motor run time: - Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO 980 | Control Panel | Single Phase for BAYT 980 Barriers

Product Overview The Fadini ELPRO 980 Control Panel is an advanced single phase electronic controller specifically designed for the BAYT 980 barriers. This control panel offers a range of functions to ensure smooth and efficient barrier operation, including step-by-step function, deadman (hold on switched) control, and both automatic and semiautomatic modes of operation. It is also preset to operate two synchronized barriers simultaneously (Master/Slave). Key Features Step-by-step function for precise control Deadman (hold on switched) control for safety Automatic and semiautomatic modes of operation Preset to operate two synchronized barriers simultaneously (Master/Slave) Connector for traffic light control card with 2/3 lights External time clock for preset opening and closing times Designed for BAYT 980 barriers Product Description The Fadini ELPRO 980 Control Panel is engineered to provide reliable and efficient control for BAYT 980 barriers. This single phase controller supports a variety of operational modes, including step-by-step function and deadman (hold on switched) control. These features ensure precise and safe barrier operation in various scenarios. The control panel offers both automatic and semiautomatic modes of operation, allowing flexibility to meet different user requirements. It is also preset to handle two synchronized barriers simultaneously, functioning as a master/slave system. This makes it an ideal solution for complex barrier installations where coordinated movements are necessary. The ELPRO 980 is equipped with a connector to accommodate a control card for traffic lights with 2/3 lights, further enhancing its versatility. Additionally, an external time clock allows for preset opening and closing operations, providing convenience and efficiency in managing barrier schedules. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: - Photocells/Keyswitch/Radio receiver output: - Pilot light output: - DSA control output: - Flasher output: - Motor run time: - Dwell time: - Box dimensions: - Protection standards: - Working temperature: -

Fadini ELPRO 12 EVO | Control Panel | Single Phase for NYOTA 115 EVO

Product Overview The Fadini ELPRO 12 EVO Control Panel is an advanced single phase electronic controller specifically designed for the NYOTA 115 EVO range of motor operators. This control panel is built to provide reliable and efficient control of gate operations, ensuring smooth and precise movements. It features multiple outputs and a range of programmable functions to suit various operational needs. Key Features Specifically designed for the NYOTA 115 EVO range of motor operators Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 12 EVO Control Panel is tailored to manage the NYOTA 115 EVO motor operators efficiently. It operates on a single phase power supply of 230 V ±10% at 50 Hz, providing a robust solution for gate automation. With a maximum motor power capacity of 750 W, it ensures powerful and reliable performance. This control panel includes several output options for enhanced functionality. The courtesy light output supports up to 230 V - 100 W for a maximum of 3 minutes, while the photocells/keyswitch/radio receiver output offers 24 V DC with a maximum of 500 mA. Additionally, the pilot light output provides 24 V DC - 3W max, and the flasher output supports 230 V DC/AC. The ELPRO 12 EVO allows for precise control over gate operation timings, with dwell times ranging from 2 to 128 seconds and pedestrian opening times adjustable between 2 to 30 seconds. It is designed to operate within a temperature range of -20°C to +55°C, making it suitable for various environmental conditions. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Motor run time: - Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO S40 | Control Panel | Single Phase, Max 4 Automatic Bollards

Product Overview The Fadini ELPRO S40 Control Panel is a single phase electronic controller designed to manage up to 4 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 4 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S40 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to four bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S40 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 2400 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 37 | Control Panel | Single/Three-Phase for Sliding Gates

Product Overview The Fadini ELPRO 37 Control Panel is a versatile electronic controller designed for sliding gates. It supports both single and three-phase applications, making it suitable for various installation needs. The control panel incorporates an electronic brake for enhanced performance and reliability. It features multiple outputs and a range of programmable functions to ensure smooth and efficient gate operation. Key Features Supports single and three-phase applications Incorporated electronic brake for improved control Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description The Fadini ELPRO 37 Control Panel is designed to provide reliable and efficient control for sliding gates. This electronic controller supports both single and three-phase applications, accommodating various power supply configurations. The integrated electronic brake enhances the control and safety of gate operations, ensuring smooth and precise movements. The control panel features a single phase PCB power supply (230 V ±10% 50/60 Hz) and a three-phase PCB power supply (400 V ±10% 50/60 Hz), allowing flexibility in installation. It supports motors with a maximum power of 750 W for single-phase and 1200 W for three-phase applications. The panel includes outputs for courtesy lights, photocells, keyswitch, radio receiver, pilot light, and DSA control, providing comprehensive control options. The motor run time is adjustable between 0 to 120 seconds, while the dwell time ranges from 1 to 220 seconds, and the pedestrian opening time is adjustable from 1 to 45 seconds. The control panel is housed in a compact box with dimensions of 210 x 295 x 110 mm, ensuring easy installation and integration. It is built to IP64 protection standards, making it suitable for various environmental conditions, and operates effectively in temperatures ranging from -20°C to +55°C. Specifications Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO S20 | Control Panel | Single Phase, Max 2 Automatic Bollards

Product Overview The Fadini ELPRO S20 Control Panel is a single phase electronic controller designed to manage up to 2 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 2 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S20 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to two bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S20 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 1200 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

FAAC 884 Rack - Galvanised (1m)

One metre Length of 30mm x 30mm Galvanised Rack for Heavy Duty Sliding Gates. Mod 6.  

V2 Gate Automation V2 Flexy2 230Vac | Analog Control Unit for Swing & Sliding Gates | Built-in Receiver & Advanced Safety

Product Overview The V2 Flexy2 230Vac is an analog control unit designed for managing both swing gates (single and double leaf) and sliding gates. This unit features adjustment and programming via trimmer and dip-switch, making it a reliable and straightforward solution for gate automation. It supports a 230V power supply for two single-phase motors and includes a built-in receiver, adding convenience and efficiency to its operation. Key Features Analog control unit for swing and sliding gates 230V power supply for 2 single-phase motors Adjustment and programming by trimmer and dip-switch Built-in receiver (433.92 MHz) Stores up to 240 Personal Pass transmitters RJ45 connector for PROG2 programmer connection Start, pedestrian start, and stop controls from the transmitter Open/close limit switch inputs 230V flashing light output with intermittency Courtesy light output controllable by transmitter Safety device test before any opening Leaf slow-down function in limit switch area Monitoring of input status shown by LEDs Product Description The V2 Flexy2 230Vac analog control unit is a robust solution for the automation of swing and sliding gates. This unit is powered by a 230V supply and can control two single-phase motors, making it suitable for various gate configurations. Its adjustment and programming are easily managed through trimmer and dip-switch settings, offering simplicity and reliability. The built-in receiver operating at 433.92 MHz enhances convenience, allowing for seamless integration with up to 240 Personal Pass transmitters. This feature ensures that multiple users can operate the gate efficiently. The RJ45 connector facilitates connection to the PROG2 programmer via a standard network cable (UTP), providing additional programming capabilities. Control options include start, pedestrian start, and stop commands from the transmitter, offering flexibility in gate operation. The unit supports open/close limit switch inputs, ensuring precise control of gate movements. A 230V flashing light output, designed for use with intermittent flashing lights, provides clear visual indicators during gate operation. For enhanced safety, the Flexy2 performs a safety device test before any gate movement, ensuring all components are functioning correctly. The leaf slow-down function in the limit switch area reduces noise and mechanical stress, ensuring smooth and quiet gate closures. The courtesy light output can be controlled by the transmitter, adding convenience and enhancing security. Monitoring of input status is facilitated by LEDs, providing clear and immediate feedback on the system's operational state. Overall, the V2 Flexy2 230Vac analog control unit combines straightforward programming, robust performance, and advanced safety features, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY2+ 24Vdc | Digital Control Unit for Swing & Sliding Gates | Advanced Programming & Safety Features

Product Overview The V2 CITY2+ 24Vdc is a digital control unit designed for managing both swing gates (single and double leaf) and sliding gates equipped with 24Vdc motors. This unit features advanced programming capabilities, safety measures, and energy-efficient functions, ensuring reliable and efficient operation of your gate systems. It is suitable for both residential and commercial applications, providing comprehensive control and monitoring functionalities. Key Features Digital control unit for swing and sliding gates with 24Vdc motors Programming achieved using 3 program buttons and display Plug-in adapter for modular radio receiver Start, pedestrian start, and stop transmitter controls Auxiliary channel management from the transmitter Emergency pack battery input Encoder input Low voltage output for warning light or 24V flashing light Safety device test before any opening Amperometric sensor obstacle detection function with programmable threshold Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Monitoring of input status using the display ADI connector for connecting optional modules Product Description The V2 CITY2+ 24Vdc digital control unit is engineered for efficient and secure management of swing and sliding gates powered by 24Vdc motors. The unit facilitates easy programming with three buttons and a display interface, ensuring user-friendly operation and configuration. This control unit supports a plug-in adapter for a modular radio receiver, enabling wireless control with start, pedestrian start, and stop functions from the transmitter. Additionally, it includes auxiliary channel management, expanding its versatility in different applications. For enhanced safety, the CITY2+ features an emergency pack battery input and an encoder input, providing reliable performance even during power outages. The low voltage output is designed for a warning light or a 24V flashing light, offering clear visual indicators of gate activity. The unit conducts a safety device test before any gate movement, ensuring all components are functioning correctly. Its amperometric sensor obstacle detection function, with a programmable threshold, enhances safety by preventing collisions. Maintenance is made simple with an operational cycle counter and programmable reminders, helping to keep the system in optimal condition. The leaf slow-down function in the limit switch area reduces noise and mechanical stress during gate closure, ensuring smooth and quiet operation. Monitoring and diagnostics are streamlined through the display that shows input status, while the ADI connector allows for the connection of optional modules, enhancing the unit's functionality and adaptability. Overall, the V2 CITY2+ 24Vdc digital control unit combines advanced technology, robust safety features, and user-friendly programming, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY1 EVO 230V | Digital Control Unit for Swing & Sliding Gates | Advanced Safety & Energy Efficiency

Product Overview The V2 CITY1 EVO 230V is a digital control unit designed to manage both swing gates (single and double leaf) and sliding gates. With its advanced programming capabilities, safety features, and energy-saving functions, this unit ensures reliable and efficient gate operation. It supports a 230V power supply for two single-phase motors equipped with ENCODER technology, making it an ideal choice for both residential and commercial gate automation needs. Key Features Digital control unit for swing and sliding gates 230V power supply for 2 single-phase motors with ENCODER Plug-in adapter for modular radio receiver MR2 Start, pedestrian start, and stop controls from the transmitter Safety device test before any opening 230V flashing light output with intermittency Self-learning operating time function Obstacle detection function Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Slow start function during opening Monitoring of input status using the display ADI 2.0 connector for advanced ADI device management USB connector for PC connectivity, firmware updates, and diagnostics LOW ENERGY module connector for electrical energy savings Product Description The V2 CITY1 EVO 230V digital control unit is a high-performance solution for managing swing and sliding gates. Designed to handle single and double leaf swing gates as well as sliding gates, this unit offers versatile and robust control capabilities. It is powered by a 230V supply and supports two single-phase motors equipped with ENCODER technology for precise and smooth operation. Programming the CITY1 EVO is straightforward, using three program buttons and a clear display interface. This user-friendly approach ensures easy setup and adjustment to meet specific operational requirements. Key safety features include a test of the safety devices before any gate movement, and an obstacle detection function that prevents collisions. The unit also features a self-learning operating time function, which optimizes performance by adapting to the gate's characteristics. The control unit is compatible with a modular radio receiver MR2, allowing for wireless control with start, pedestrian start, and stop functions accessible from the transmitter. A 230V flashing light output, intended for use with intermittent flashing lights, provides clear visual indicators during gate operation. Maintenance is simplified with an operational cycle counter and programmable reminders, ensuring the system remains in optimal condition. The unit's leaf slow-down function in the limit switch area reduces noise and mechanical stress, while the slow start function during opening further enhances smooth operation. Monitoring and diagnostics are facilitated through a display that shows input status, and the ADI 2.0 connector allows for advanced management of ADI devices. Additionally, a USB connector enables connection to a PC for detailed programming, firmware updates, and operation diagnostics. For energy efficiency, the LOW ENERGY module connector helps reduce power consumption by deactivating non-essential components when the gate is not in motion. This feature contributes to lower energy costs and enhanced sustainability. Overall, the V2 CITY1 EVO 230V digital control unit combines advanced technology, comprehensive safety features, and energy-saving functionalities, making it a top choice for modern gate automation systems.

Roger Technology Brushless B70/1DCHP Control Board | 36V Heavy-Duty, High-Speed

Product Overview The Roger Technology Brushless B70/1DCHP Control Board is a high-performance 36V control board specifically designed for heavy-duty and high-speed sliding gate applications. Featuring a digital encoder, this control board ensures precise and reliable operation, making it ideal for demanding residential and commercial environments. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 36V control board designed for heavy-duty and high-speed sliding gates Brushless technology for enhanced efficiency and durability Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various high-demand applications Product Description The Roger Technology Brushless B70/1DCHP Control Board is engineered to deliver superior performance for heavy-duty and high-speed sliding gates. This 36V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement, even in demanding conditions. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use in high-demand settings. Specifications Control Board Type Brushless Voltage 36V Application Heavy-duty and high-speed sliding gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DCHP Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling heavy-duty and high-speed sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DCHP Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

Roger Technology Brushless B70/1DC Control Board | 24V Control with Digital Encoder

Product Overview The Roger Technology Brushless B70/1DC Control Board is a state-of-the-art 24V control board designed specifically for sliding gates. Equipped with a digital encoder, this control board ensures precise and reliable operation, making it an ideal choice for both residential and commercial applications. For optimal performance and longevity of the PCB, it is important to fit a mains filter on the supply to the control panel to reduce mains interference. Key Features 24V control board designed for sliding gates Brushless technology for enhanced efficiency Equipped with a digital encoder for precise control Reduces mains interference with the addition of a mains filter Prolongs the lifespan of the PCB Reliable and durable for various applications Product Description The Roger Technology Brushless B70/1DC Control Board is engineered to deliver superior performance for sliding gates. This 24V control board utilizes brushless technology, which enhances its efficiency and durability. The integrated digital encoder ensures that the gate operates with high precision, providing smooth and consistent movement. To maximize the lifespan of the PCB and minimize any potential mains interference, it is crucial to install a mains filter on the supply to the control panel. This simple addition can significantly improve the performance and reliability of the control board, making it a sound investment for long-term use. Specifications Control Board Type Brushless Voltage 24V Application Sliding Gates Encoder Digital Recommended Accessory Mains filter Installation and Usage Installing the Roger Technology B70/1DC Control Board is straightforward, but it is important to ensure that a mains filter is fitted on the supply to the control panel. This will help reduce mains interference and prolong the life of the PCB. The control board's advanced brushless technology and digital encoder make it a reliable and efficient choice for controlling sliding gates. Additional Information For more information about the Roger Technology Brushless B70/1DC Control Board or to place an order, please contact us. Our team is ready to assist you with any questions or support you may need.  

ASO Indus Kit

ASO Indus Kit 71-242 Set S Inductive Transmission System The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. Features Inductive transmission kit CAT 3 transmission system for sliding gates Easy and fast installation 24V AC/DC 2 x Stationery Edge Inputs 2 x Moving Edge Inputs

Fadini F/746DXL Plate RH

Fadini F/746DXL Right Handed Plate with F-ring with square hole, to be welded to the gate

Fadini F/746SXL Plate LH

Fadini F/746SXL Left Handed Plate with F-ring with square hole, to be welded to the gate

DEA 560 Articulated Arms for LIVI 502 | Aluminum & Galvanized Steel Options

Product Overview The 560 Articulated Arms for LIVI 502 are designed to enhance the functionality and versatility of the LIVI 502 automation system. These arms are available in a variety of materials and configurations to suit different installation needs. Whether you require aluminum or galvanized steel, sliding or painted options, the 560 series offers a robust solution for your gate automation requirements. Key Features Compatible with LIVI 502 automation system Available in aluminum and galvanized steel Options for both left and right side installations Durable construction for long-lasting performance Various configurations to meet specific needs Product Description The 560 Articulated Arms for LIVI 502 are specifically engineered to provide reliable and efficient operation for swing gates. These arms are essential components for the LIVI 502 automation system, offering flexibility and durability to accommodate various gate setups. The range includes different types of arms to ensure that you can find the perfect match for your specific installation requirements. Product Guide CodeProductDescription 629130 560A Aluminum articulated arm 629110 560BD Galvanized steel rail sliding arm, right side (L. 800 mm) 629120 560BS Galvanized steel rail sliding arm, left side (L. 800 mm) 629140 560BV Painted galvanized steel articulated arm Detailed Descriptions 560A - Aluminum Articulated Arm: Lightweight and durable, this arm is designed for easy installation and reliable performance. 560BD - Galvanized Steel Rail Sliding Arm (Right Side): This right-side sliding arm, made of galvanized steel, offers enhanced corrosion resistance and strength, measuring 800 mm in length. 560BS - Galvanized Steel Rail Sliding Arm (Left Side): Similar to the 560BD, this left-side sliding arm is also 800 mm long and provides the same durability and corrosion resistance. 560BV - Painted Galvanized Steel Articulated Arm: This painted version of the galvanized steel arm combines aesthetic appeal with robust performance, ensuring long-lasting use. What's in the Box 560 Articulated Arm (specific type based on order) Mounting hardware Installation instructions For more information or to explore our full range of products, please visit our website or contact our customer service team.

DEA Racks for sliding gates - 1m length (111, 112, 113, 116)

DEA Racks for sliding gates - 1m length (111, 112, 113, 116) PRODUCT GUIDE CODE PRODUCT DESCRIPTION 619000 111* Nylon rack, with fixing screws (1m) 126001 112** Galvanized steel rack 22x22mm (1m) 126000 113** Galvanized steel rack 30x12mm with zinc-plated spacers and fixing screws (1m) 126008 116 Galvanized steel rack M6 (1m)   NOTE:  * Order in multiples of 10 ** Order in multiples of 4  

NICE High Mechanical Sensitive Edge with Aluminium Profile CMA2 5MT - Length 2.5m

High mechanical edge with aluminium profile - length 2.5m.

NICE High Mechanical Edge CMA 2MT with Aluminium Profile - 2m

High mechanical edge with aluminium profile - length 2m.

NICE High Mechanical Edge with Aluminium Profile CMA 1.7MT

High mechanical edge with aluminium profile, measuring 1.7m.  

NICE High Mechanical Edge with Aluminium Profile CMA1 5MT - 1.5m

High mechanical edge with aluminium profile measuring 1.5m.

ROGER TECHNOLOGY EDGE1/Box - 36V Control Unit for 2 Brushless Motors

Product Overview The EDGE1/Box is a sophisticated 36V digital control unit specifically designed for managing two brushless motors. Encased in a durable plastic box, this unit provides robust control and power management for automated gate systems, ensuring reliability and efficiency in both residential and commercial settings. Key Features Digital control for two brushless motors Operates at 36V with a 230V AC power supply Comes in a protective plastic box Supports a wide operating temperature range Multiple accessory outputs and support for an optional battery Product Description The EDGE1/Box control unit is engineered to handle the complexities of modern gate automation systems. With the ability to manage two brushless motors, this unit provides precise control and power distribution, making it an essential component for swing and sliding gate operations. The robust plastic enclosure ensures durability and protection against environmental factors. Specifications SpecificationDetails Power line supply 230V AC - 50 Hz Operating temperature -10 to +55°C Protection level IP54 Number of motors activated 2 Brushless Motors Max power per motor 250W Max courtesy light charge 100W (230V AC) / 40W (24V AC/DC) Max power gate open light 3W (24V DC) Max voltage accessories output 20W (24V DC) Electrical-lock max power 15W (12V DC) Flashlight voltage 24V DC Max flashing light charge 25W Battery Optional Dimensions (L x W x H) 330 x 230 x 115 mm Product weight packed 5.7 kg Number of items per pallet 50 Applications The EDGE1/Box is ideal for controlling swing and sliding gate systems in both residential and commercial environments. Its advanced features and durable design make it a reliable choice for ensuring the smooth operation of automated gates.

ROLLING CENTRE Magnum2 Kit 1 for Cantilever Gates | Up to 18m Opening & 2200kg Weight

Product Overview The Magnum2 Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 18 meters and supporting gates up to 2200kg in weight. Cantilever gate systems are the ideal applications for commercial, public sector, and industrial gates where there is intensive use due to the robustness of the cantilever mechanism, providing a high level of security. These systems offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 18 meters Handles gates up to 2200kg in weight No track required No ground work needed Low maintenance Suitable for intensive use High level of security Product Description The Magnum2 Kit 1 for cantilever gates is an efficient and reliable solution for supporting gates with a clear opening up to 18 meters and weighing up to 2200kg. This cantilever kit is ideal for various environments including commercial, public sector, and industrial settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a high level of security suitable for intensive use. Included in the Kit The kit includes the following components: 2 x 6m GIPI 4RM2C6 Magnum2 Hot Galvanised Track 2 x CA4RMS2 8-wheeled Magnum2 Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum2 Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Hot Galvanised Track: 2 x 6m GIPI 4RM2C6 made from structural grade steel Magnum2 Cantilever Carriages: CA4RMS2, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum2 Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum2 Carriage Drawing and Table Magnum2 Meeting Point Drawing and Table Magnum2 Support Wheel Drawing and Table Magnum2 Track Drawing and Table

ROLLING CENTRE Magnum Kit 1 for Cantilever Gates | Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 16 meters and supporting gates up to 1200kg in weight. Cantilever gate systems are often chosen for industrial or commercial installations due to their robust mechanism which provides a high degree of security. These systems work equally well on residential gates and offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 16 meters Handles gates up to 1200kg in weight No track required No ground work needed Limited maintenance Ideal for intensive use Aesthetically pleasing design Product Description The Magnum Kit 1 for cantilever gates is a robust and reliable solution for supporting gates with a clear opening up to 16 meters and weighing up to 1200kg. This cantilever kit is ideal for various environments including industrial, commercial, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a sleek and aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 2 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x CA4RMS 8-wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 2 x 6m GIPI 6RMZ6 made from structural grade steel Magnum Cantilever Carriages: CA4RMS, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum Carriage Drawing and Table Magnum Meeting Point Drawing and Table Magnum Support Wheel Drawing and Table Magnum Track Drawing and Table MAGNUMKIT Dimensions MAGNUMKIT GIPI6 RMZ6 Dimensions

ROLLING CENTRE Medium Kit 1 for Cantilever Gates | Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 1 is a robust cantilever gate system designed for clear gate openings up to 8 meters and supporting gates up to 600kg in weight. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need for ground tracks, minimal ground work, lower labor costs, reduced maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 8 meters Handles gates up to 600kg in weight No track to lay Limited ground work needed Lower cost of labor Reduced maintenance Capable of intensive use Sleek finish Product Description The Medium Kit 1 for cantilever gates is an efficient and reliable solution for supporting gates with a clear opening up to 8 meters and weighing up to 600kg. This cantilever kit is ideal for various environments including commercial, public sector, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing labor costs, and necessitating less maintenance. These features make the system suitable for intensive use while maintaining a sleek and aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 1 x 3m GIPI 5 RGZ3 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages (S235 structural grade steel body with C45 case-hardened carbon steel bearings) 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points (S235 structural grade steel, galvanised finish) Specifications The Medium Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 6m GIPI 5 RGZ6 and 3m GIPI 5 RGZ3 made from structural grade steel Medium Cantilever Carriages: CA4RS, 8-wheeled, made from S235 structural grade steel with C45 case-hardened carbon steel bearings Medium Support Wheels: 41P/S, with cover Meeting Points: 50P, made from S235 structural grade steel, galvanised finish Dimensions Medium Carriage Drawing and Table Medium Meeting Point Drawing and Table Medium Support Wheel Drawing and Table Medium Track Drawing and Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions

ROLLING CENTRE Mini Kit 1 for Cantilever Gates | Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 1 is a comprehensive cantilever gate system designed for clear gate openings up to 6 meters and supporting gates up to 450kg in weight. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need for ground tracks, minimal ground work, lower labor costs, less maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 6 meters Handles gates up to 450kg in weight No requirement to lay track in the ground Minimal ground work required Lower cost of labor Less maintenance Suitable for intensive use Aesthetically pleasing design Product Description The Mini Kit 1 for cantilever gates is a reliable and durable solution for supporting gates with a clear opening up to 6 meters and weighing up to 450kg. This cantilever kit is ideal for various environments including commercial, public sector, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing labor costs, and necessitating less maintenance. These features make the system suitable for intensive use while maintaining an aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 1 x 6m GIPI 4 RPZ6 Galvanised Track (S280GD structural grade steel) 2 x CA4RPS Mini 8-wheeled cantilever carriages (S235 structural grade steel body with C45 case-hardened carbon steel bearings) 2 x 41B/S Mini support wheels with plate (S235 structural grade steel body and case-hardened C45 carbon steel roller bearing, galvanised finish) 2 x 50B Meeting Points (235 structural grade steel, galvanised finish) Specifications The Mini Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 6m GIPI 4 RPZ6 made from S280GD structural grade steel Mini Cantilever Carriages: CA4RPS, 8-wheeled, made from S235 structural grade steel with C45 case-hardened carbon steel bearings Mini Support Wheels: 41B/S, with plate, made from S235 structural grade steel and C45 case-hardened carbon steel roller bearings, galvanised finish Meeting Points: 50B, made from 235 structural grade steel, galvanised finish Dimensions Mini Carriage Drawing and Table Mini Meeting Point Drawing and Table Mini Support Wheel Drawing and Table Mini Track Drawing and Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops

Fadini F/7047L Elpro 27 | Single Phase Control Panel | Swing/Sliding Gates

Product Overview The Fadini Elpro 27 single phase control panel is designed to efficiently control single or double swinging gates as well as single or bi-parting sliding gates. This versatile electronic controller is equipped with motor capacitors and can handle motor operators with or without limit switches, making it suitable for a wide range of gate automation applications. Key Features Single phase PCB power supply: 230 V ±10% 50/60 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W max DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time: 1 - 220 S Closing gate delay time: 0-10 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description Fadini F/7047L Elpro 27 Single Phase Control Panel The Fadini Elpro 27 control panel is an advanced electronic controller designed for the automation of single or double swinging gates and single or bi-parting sliding gates. This controller is equipped with motor capacitors and supports motor operators with or without limit switches. The Elpro 27 is ideal for various gate automation applications, offering a single phase PCB power supply of 230 V ±10% 50/60 Hz, and a maximum motor power capacity of 750 W. Key outputs of the Elpro 27 include courtesy light output at 230 V - 100 W max, photocells/keyswitch/radio receiver output at 24 V AC, pilot light output at 24 V - 3W max, DSA control output at 24 V AC, and flasher output at 230 V - 25 W max. The control panel provides adjustable motor run time settings (0 - 120 S for sliding gates and 0 - 60 S for swing gates), dwell time (1 - 220 S), closing gate delay time (0-10 S), and pedestrian opening time (1 - 45 S). Encased in a durable box with dimensions of 210 x 295 x 110 mm, the Elpro 27 meets IP64 protection standards and operates efficiently in a working temperature range of -20°C to +55°C. This control panel ensures reliable and safe operation for various gate automation needs. Technical Specifications SpecificationDetails Single phase PCB power supply 230 V ±10% 50/60 Hz Max. power of motors 750 W Courtesy light output 230 V - 100 W max Photocells/Keyswitch/Radio receiver output 24 V AC Pilot light output 24 V - 3W max DSA control output 24 V AC Flasher output 230 V - 25 W max Motor run time 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time 1 - 220 S Closing gate delay time 0-10 S Pedestrian opening time 1 - 45 S Box dimensions 210 x 295 x 110 mm Protection standards IP64 Working temperature -20°C to +55°C

CAME Straight telescopic transmission arm Ferni Telescopic Arm

BPT CAME-F1001 | The telescopic arm for use with FERNI gearmotors is designed for to meet all application requirements forhinged doors and gates, and is especially suitable for overhead installation. The arm may be fitted to doors/gatesup to 2 m. in width.

CAME Multifunction control panel ZM3ES Max one 230-400 V AC 3-phase motor

CAME ZM3ES | Control Panel For A Superfrog The CAME-ZM3ES is a control panel for a Superfrog. This product has been designed to be a multifunctional control panel which has been manufactured for compatibility with swing gates. Please refer to the dimensions below for the product specifications. FEATURES Control Panel SPECIFICATIONS: Designed For A Superfrog DIMENSIONS 543mm (height) x 353mm (width) x 133mm (depth)