BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

BENINCA SC.RF - (Rx) Wireless safety edge receiver 868Mhz

Product Overview Radio wave frequency system - 868mhz Battery powered Suitable for resistive 8.2 Kohm or mechanical N/O edges Visually discreet installation as IP55 transmitter is in a smart cover Small receiver, fits most applications One SC.RF Receiver will receive signals from 8 x Separate RF transmitters. (2 x Relays)

BENINCA RF - (Tx) Wireless safety edge transmitter 868Mhz

Product Overview Transmitter for wireless safety edge (868 MHz)

LOCINOX MAGMAG | Surface Mounted Magnetic Lock | 300kg or 600kg Pulling Force

Product Overview The MAGMAG Surface Mounted Magnetic Lock is a robust and reliable access control solution designed for quick and easy installation. Available in two versions, MAG3000 with 300 kg pulling force and MAG6000 with 600 kg pulling force, this magnetic lock provides strong security for various applications. The aluminium powder-coated housing ensures durability and long-lasting performance, even in harsh outdoor environments. The Quick-Fix system allows for fast and efficient mounting without the need for welding boxes. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Powder-coated aluminium housing Anti-residual magnetism kick-off system Raised edge on the magnet housing prevents crowbar insertion between magnet and armature plate Fail open mechanism Fast and easy fixing by means of 5 holes with Quick-Fix Voltage: 12V / 24V DC MAG3000: Minimal pulling force: 3000N (300 kg) MAG6000: Minimal pulling force: 6000N (600 kg) Current MAG3000: 500 mA / 12V or 250 mA / 24V Current MAG6000: 460 mA / 12V or 230 mA / 24V Product Description The MAGMAG Surface Mounted Magnetic Lock provides robust security and reliable performance for access control applications. Available in two versions with 300 kg or 600 kg pulling force, this lock is designed for quick installation using the Quick-Fix system. The aluminium powder-coated housing ensures durability and resistance to harsh outdoor conditions, while the special two-layer protective coating provides additional protection against the elements. The fail-open mechanism ensures safety in the event of power failure. Installation and Usage Installing the MAGMAG magnetic lock is efficient and straightforward with the Quick-Fix system, requiring only five holes for mounting. The lock is compatible with both 12V and 24V DC power sources, with the MAG3000 version drawing 500 mA at 12V or 250 mA at 24V, and the MAG6000 version drawing 460 mA at 12V or 230 mA at 24V. The raised edge on the magnet housing prevents tampering with a crowbar, enhancing security. The lock's fail-open mechanism ensures that it remains open in the event of a power failure, providing an additional layer of safety. Durability and Protection The MAGMAG magnetic lock is built to withstand harsh weather conditions, with a special two-layer protective coating and a powder-coated aluminium housing that resists corrosion. Its SGS-certified salt spray resistance ensures long-lasting durability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, ensuring reliable operation. These features make the MAGMAG lock an ideal choice for secure and durable access control in various environments.

LOCINOX MAG | Surface Mounted Magnetic Lock with Integrated Handles | 300kg or 600kg Pulling Force

Product Overview The MAG Surface Mounted Magnetic Lock with Integrated Handles is an advanced access control solution designed for ease of installation and reliable security. Available in two versions, MAG3000 and MAG6000, with pulling forces of 300 kg and 600 kg respectively, this lock ensures robust protection for various applications. The aluminium powder-coated housing with integrated design handles adds an aesthetic touch to your access control gate. The Quick-Fix system enables fast and strong fixing, eliminating the need for welding boxes. With a special two-layer protective coating, the MAG lock is built for long-lasting outdoor use. Key Features Guaranteed holding force tested on every magnetic lock 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Powder-coated aluminium housing Anti-residual magnetism kick-off system Raised edge on the magnet housing prevents crowbar insertion between magnet and armature plate Fail open mechanism Fast and easy fixing by means of 5 holes with Quick-Fix Voltage: 12V / 24V DC MAG3000: Minimal pulling force: 3000N (300 kg) MAG6000: Minimal pulling force: 6000N (600 kg) Current MAG3000: 500 mA / 12V or 250 mA / 24V Current MAG6000: 460 mA / 12V or 230 mA / 24V Product Description The MAG Surface Mounted Magnetic Lock is designed to provide high-security access control with an integrated aesthetic appeal. Its robust construction, featuring powder-coated aluminium housing and integrated handles, ensures both durability and a sleek look. The lock's special two-layer protective coating and SGS-certified salt spray resistance guarantee reliable performance in outdoor environments. The Quick-Fix system simplifies installation, making the MAG lock a practical choice for various security applications. Installation and Usage Installing the MAG magnetic lock is efficient and straightforward, thanks to the Quick-Fix system, which requires only five holes. The lock is compatible with both 12V and 24V DC power sources, with the MAG3000 version drawing 500 mA at 12V or 250 mA at 24V, and the MAG6000 version drawing 460 mA at 12V or 230 mA at 24V. The raised edge on the magnet housing prevents tampering with a crowbar, enhancing security. The lock's fail-open mechanism ensures that it remains open in the event of a power failure, providing an additional layer of safety. Durability and Protection The MAG magnetic lock is built to withstand harsh weather conditions, with a special two-layer protective coating and a powder-coated aluminium housing that resists corrosion. Its SGS-certified salt spray resistance ensures long-lasting durability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, ensuring reliable operation. These features make the MAG lock an ideal choice for secure and durable access control in various environments.

KEY AUTOMATION 14A Control Board | Control Units for 24V Automation Systems

Product Overview The 14A Control Board is a state-of-the-art control unit designed to manage all 24V automation systems efficiently. This unit features the NIGHT LIGHT SYSTEM, allowing for automatic control of LED lights during night hours. It requires either a DYL display or the KUBE PRO wireless module for programming. The 14A control board supports up to 20 additional LED lights, providing an economical and automated lighting solution for your entrance during the night. Key Features Latest generation control unit for all 24V automation systems NIGHT LIGHT SYSTEM for LED light control during night hours Mandatory DYL display or KUBE PRO wireless module for programming Supports up to 20 additional LED lights Amperometric obstacle detection with run inversion Standard or programmable slowdown in opening and closing Programmable automatic partial closing Separate OPEN-STOP-CLOSE inputs and PP - PARTIAL input Inputs and safety devices LED visualization Optional test for safety edge LED courtesy light output Open gate indicator output Plug-in programmable radio receiver with 4 channels Flashing light output with user indicator Electro lock output Optional battery backup Product Description Models CodeDescription 14AB2 Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA - mandatory for motors RAY4024E, UND24, SN-50-24, SN5024B 14AB2F Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA to be paired with fast line motors MA24 Logic mainboard PO24 Power module 24Vdc 10A BOX250 Box with transformer 250 VA Operator Specifications ModelInput Power [Vac/Hz]Output Power [Vdc]Max Motor Power [W]Max Working Time [sec]Max Pause Time [sec]Obstacle DetectionProtection DegreeDimensions [mm]Working Temperature [°C] 14AB2 / 14AB2F 230/50 24 300 240 900 Yes IP54 222 x 275 x 110 -20 + 55

CCE SAFETY PICCOLA Conductive safety edge with 8.2 KΩ, h=14mm, length optional - with cable for serial connection

CCE Safety Safety contact edges with 8.2 KΩ, h=14mm, length optional PICCOLA can be used on swing gates to protect the shearing point between the pillar and the gate leaf. It also can be used on industrial machinery as a safety edge for perimetral safety. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-PICCOCND800 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=0.8 m CC-PICCOCND1200 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=1.2 m CC-PICCOCND1600 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=1.6 m CC-PICCOCND2000 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=2 m CC-PICCOCND2500 14mm Safety contact edges with 8.2 KΩ, h=14mm, L=2.5 m    

CCE SAFETY MINI LINK Conductive safety edge with 8.2 KΩ, h=38mm, length optional - with cable for serial connection (CC-16MINILINK, CC-20MINILINK, CC-25MINILINK)

Conductive safety edge with 8.2 KΩ, h=38mm, length optional - with cable for serial connection (CC-16MINILINK, CC-20MINILINK, CC-25MINILINK) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16MINILINK 38mm Conductive safety edge 8.2 KΩ L=1.6m h=38mm with cable for serial connection CC-20MINILINK 38mm Conductive safety edge 8.2 KΩ L=2m h=38mm with cable for serial connection CC-25MINILINK 38mm Conductive safety edge 8.2 KΩ L=2.5m h=38mm with cable for serial connection Safety resistive edges are EN12978 compliant, when paired to the 135/2 board  

CCE SAFETY 135/2 2-channel Electronic Board for Certification of Conductive or Resistive Safety Edges

CCE Safety 135/2 2-channel electronic board for certification of conductive or resistive safety edges 2-channel electronic board for certification of conductive safety edges (up to 4 edges, 2 per channel) or resistive safety edges (in series). See safety edges bellow.  

CCE SAFETY MINI Conductive safety edge with 8.2 KΩ, h=38mm, length optional (CC-16MINI, CC-20MINI, CC-25MINI)

CCE Safety Conductive safety edge with 8.2 KΩ, h=38mm, length optional - EN12978 (CC-16MINI, CC-20MINI, CC-25MINI) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16MINI 38mm Conductive safety edge 8.2 KΩ L=1.6m h=38mm CC-20MINI 38mm Conductive safety edge 8.2 KΩ L=2m h=38mm CC-25MINI 38mm Conductive safety edge 8.2 KΩ L=2.5m h=38mm LINK versions with cable available (for serial connection) - click to open. Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY COMPATTA LINK Conductive 60mm Safety Edges for series connection (resistor included) with optional length - EN12978

CCE Safety Conductive 60mm Safety Edges for series connection (resistor included) - EN12978 (CC-16LINK, CC-20LINK, CC-25LINK, CC-40LINK, CC50-LINK) Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE PRODUCT PROFILE SIZE DESCRIPTION CC-16LINK 60mm Conductive safety edge 8.2 KΩ L=1.6m for series connection (resistor included) CC-20LINK 60mm Conductive safety edge 8.2 KΩ L=2m for series connection (resistor included) CC-25LINK 60mm Conductive safety edge 8.2 KΩ L=2.5m for series connection (resistor included) CC-40LINK 60mm Conductive safety edge 8.2 KΩ L=4m for series connection (resistor included) CC-50LINK 60mm Conductive safety edge 8.2 KΩ L=5m for series connection (resistor included) Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY COMPATTA Conductive 60mm Aluminum and Rubber Safety Edge with Obstacle Detection Circuit (CC-16, CC-20, CC-25)

CCE Safety Conductive 60mm Aluminum and Rubber Safety Edge with Obstacle Detection Circuit - EN12978 (CC-16, CC-20, CC-25)  Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system. PRODUCT GUIDE  PRODUCT   PROFILE SIZE  DESCRIPTION CC-16 60mm Conductive safety edge 8.2 KΩ Length=1.6m CC-20 60mm Conductive safety edge 8.2 KΩ Length=2m CC-25 60mm Conductive safety edge 8.2 KΩ Length=2.5m   Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

CCE SAFETY Resistive Aluminum and Rubber Safety Edge with Obstacle Detection Circuit - EN12978

CCE Safety Resistive Aluminium and Rubber Safety Edge with Obstacle Detection Circuit - EN12978  Safety edges are borders that can be applied to all the construction elements that delimit a passage (gates, doors, barriers, etc.) to avoid the risk of crushing. When the safety edge detects an obstacle, it sends an impulse that interrupts and reverses the movement of the automation. This device ensures a rapid response to impacts over the entire length of the gate leaf, offering a greater degree of safety to your automated system.. PRODUCT GUIDE PRODUCT DESCRIPTION CC-16 Safety resistive edge L=1.6m CC-20 Safety resistive edge L=2m CC-25 Safety resistive edge L=2.5m 121N Safety resistive edge L=0.90m for IRONBOX Safety resistive edges are EN12978 compliant, when paired to the 135/2 board

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP)

DEA SOFT Black rubber profile passive edge (SOFT3 / SOFTP / GSOFTP) PRODUCT DESCRIPTION SOFT3 Safety black rubber profile (complete with aluminium base) useful to reduce the impact forces for sliding and swing gates (12m) SOFTP Black rubber and aluminium profile useful to reduce the impact forces for overhead doors (24m) GSOFTP Black rubber profile, EPDM S65 (24m)  

ROGER TECHNOLOGY H70/200AC/BOX Control Board | Swing Gate Automation | 230V AC

Product Overview The H70/200AC/BOX Control Board is a highly advanced solution for swing gate automation. Designed to handle two asynchronous monophase motors, this control board offers versatile programming options and robust power capabilities, making it ideal for a wide range of gate automation applications. With an IP54 protection level and the ability to operate in temperatures ranging from -10 to +55°C, the H70/200AC/BOX is built for durability and reliable performance. Key Features Supports swing gate automation for up to two motors Operates on 230V AC +/- 10% 50 Hz power supply IP54 protection level for robust durability Advanced programmable features for each output Inputs for safety rib edges NC and 8k2 Specifications SpecificationDetails Power 230V AC +/- 10% 50 Hz Protection Level IP54 Operating Temperature -10 to +55°C Max Flashing Light Charge 40W (12-230V AC/DC) Number of Motors Activated 2 asynchronous monophase Max Power per Motor 600W 230V AC Max Courtesy Light Charge 100W (12-230V AC/DC) Max Power Gate Open Light 2W 24V AC Max Voltage Accessories Output 350mA 24V AC (500mA 24V DC) Advanced Mode Features The H70/200AC/BOX control board offers an advanced mode that unlocks a wide range of programmable features. This allows for the configuration of each output to meet specific operational needs, providing flexibility and customization for various gate automation scenarios. Safety Features Equipped with inputs for safety rib edges NC and 8k2, the H70/200AC/BOX ensures enhanced safety for automated gate operations. These safety features help prevent accidents and ensure secure operation. Applications This control board is ideal for residential and commercial swing gate automation, providing reliable and customizable control for up to two motors. Its advanced features and robust design make it suitable for a wide range of gate automation projects.

ASO Indus Kit

ASO Indus Kit 71-242 Set S Inductive Transmission System The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. The ELMON inductive system allows a signal from the safety edges to be sent to the control unit, where normal cables which can not move may be problematic. Features Inductive transmission kit CAT 3 transmission system for sliding gates Easy and fast installation 24V AC/DC 2 x Stationery Edge Inputs 2 x Moving Edge Inputs

Nice MC800 Control Panel for 230V Motors with BlueBUS Technology

Product Overview The Nice MC800 Control Unit is designed for managing 1 or 2 230V motors, integrating seamlessly with Nice BlueBUS technology and the Nice Opera system. This advanced control panel offers easy installation and connection of accessories, along with enhanced automation management, programming, and diagnostics capabilities, even remotely. Key Features BlueBUS Compatibility: Enables simple connection of the control unit and accessories using just two wires. Opera System Compatibility: Allows for comprehensive automation management, programming, and diagnostics, including remote operations. Multi-function O-View Display: (Not included) Mountable in the box for system personalization, modifying opening and closing positions, staggered closing of leaves, and decelerations, and adjusting parameters like force, speed, and obstacle sensitivity for each motor. Universal Power Supply: 120/230 VAC 50/60Hz Microprocessor Logic: Combines the benefits of the Nice Opera system with advanced Nice system functions such as gradual start and deceleration, automatic limit switch position memorization, and pedestrian pass door function. Safe and Reliable: Features obstacle detection with double technology throughout the travel and the possibility of connecting latest generation resistive sensitive edges. Intelligent Design: Includes features like power supply confirmation and efficient operation indication, automatic fault diagnostics, and signaling via flashing light and confirmation LEDs. Radio Receiver: Designed to accommodate SM plug-in receivers. Compatible Motors TO4005 TO4006 TO4015 TO4605 TO5015 TO5016 TO5605 HY7100 HY7005 WG4000 WG5000 MFAB3000 MFAB3000L LFAB4000 Advanced Features Gradual Start and Deceleration: Smooth operation and reduced wear on the motor. Automatic Limit Switch Position Memorization: Simplifies setup and ensures accurate operation. Pedestrian Pass Door Function: Enhances accessibility and convenience. Obstacle Detection: Double technology throughout the travel for improved safety. Fault Diagnostics: Automatic and easy-to-read signaling via flashing light and confirmation LEDs. Flexible Configuration: Customizable parameters for force, speed, and obstacle sensitivity for each motor. Installation and Operation The Nice MC800 control panel ensures a straightforward installation process, thanks to its BlueBUS technology which simplifies wiring to just two wires for all connections. The control unit's compatibility with the Nice Opera system enables advanced remote management, making it a smart choice for both residential and commercial applications. Technical Specifications Power Supply: 120/230 VAC 50/60Hz Output: Supports 1 or 2 230V motors Radio Receiver: Compatible with SM plug-in receivers Protection: Built-in obstacle detection with double technology

Control Board Range for DEA Automation (230V and 24V)

Product Overview The DE@NET Control Board range is a versatile and universal solution compatible with all DEA automations, whether 230V or 24V. Designed to simplify and streamline the management of automation systems, DE@NET control units provide smart, safe, and efficient operation for a variety of applications, from residential to industrial settings. DE@NET control boards are equipped with advanced features such as dynamic movement control via digital encoder, built-in radio receivers, and the ability to control up to two automations in a synchronized manner. This makes them ideal for managing complex systems with ease. Key Features Universal Compatibility: Compatible with all DEA automations, both 230V and 24V. Smart Management: Simplified installation and configuration, requiring only knowledge of motor voltage. Dynamic Movement Control: Equipped with digital encoders for precise and safe operation. Built-in Radio Receiver: 433MHz receiver capable of storing up to 100 remote controls. Safety Features: Includes anti-crush sensors and obstacle detection for enhanced safety. Flexible Mounting Options: Available in various configurations, including bare circuits, plastic boxes, and metal plates for STEELBOX installations. Easy Programming: Simplified learning procedure with 99 adjustable parameters for customized operation. NETLINK Technology: Manage and configure installations via smartphone with the DEAinstaller app. Specifications Models: NET230N, NET24N, NET230N/C, NET24N/C, NET230N/PROBOX, NET24N/PROBOX, NET24N/C250 Power Supply: Available in 230V AC and 24V DC versions Control Panel: Universal digital control board for 1 or 2 operators Radio Receiver: 433MHz, supports up to 100 remote controls Mounting Options: Bare circuit, plastic box, or metal plate with cable holders and DIN rail Programming Parameters: 99 adjustable settings including force, speed, slowdown, and sensor sensitivity Versions NET230N: Circuit only NET230N/C: Control board with box (100G) NET230N/PROBOX: Control board on plate with cable holders and DIN rail for STEELBOX NET24N: Circuit only NET24N/C: Control board with box (100GR) NET24N/PROBOX: Control board on plate with cable holders and DIN rail for STEELBOX For more detailed information, please refer to the product manuals and installation guides available in the downloads section. What's in the Box 1 x DE@NET Control Board (model varies) 1 x Mounting Box (for models with /C or /PROBOX) Installation Instructions For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

DEA D-BAND TX Transmitter | Type CR2032 Battery Powered

Wireless Band TX Safety Edge Transmitter Single channel transmitter 868MHz for use with wireless safety edges. NEW VERSION: Now with AA 3.6V batteries for longer battery life. Compatible with Wireless Band Receiver and D-Band RX 2 Channel Receiver. Up to 7 transmitters can be programmed to each channel of the receiver. Dimensions: 51mm (H) x 103mm (L) x 36mm (W)

DEA W-BAND KIT Radio Transmitter and 868 MHz Radio Receiver (Supersedes D-BAND)

Wireless Band Safety Edge Transmitter & Receiver Kit WIRELESS SAFETY EDGE Transmitter & Receiver Kit Replaces D-BAND KIT. Transmitter now has AA 3.6V Batteries for longer life. Transmitter and 868MHz radio receiver for wireless communication between resistive or mechanical safety edges and control board. Kit Contains: 1 x Wireless Band TX 868MHz Boxed Transmitter 1 x Wireless Band RX 868MHz Boxed Receiver Key Features: Improved Battery Life: Transmitter features a 3.6V Lithium AA style battery that lasts significantly longer than the previous D-BAND model's CR2032 battery Dual Output Relays: Receiver unit has 2 output relays for flexible installation Multi-Device Support: Up to 7 transmitters (wireless safety edges) can be linked to each output relay (14 total) Enhanced Performance: This Wireless Band kit supersedes the older D-BAND kit, offering superior performance and extended battery life Need additional transmitters? Additional Wireless Band TX Safety Edge Transmitters available separately.

NICE Electrical Connection Kit DBM10 for Safety Sensitive Edges - Gates up to 10m

Electrical connection kit for safety-sensitive edges on moveable leafs for gates up to 10m.

NICE Electrical Connection Kit for Safety Sensitive Edges DBM5 - Gates up to 5m

Complete electrical connection kit for safety-sensitive edges on moveable leafs - gates up to 5m.

NICE Control Interface TCE for Sensitive Edge

Control interface for a sensitive edge.

NICE Aluminium Profile TCA65 L-200cm

Aluminium profile L=200cm.

NICE Scissors for Cutting Safety Sensitive Edges TCF

Scissors for cutting safety sensitive edges - accessory.

Nice&Safe Kit TCK | Sensitive Edge Assembly Kit

Product Overview The Nice&Safe Kit TCK is designed for assembling up to 8 sensitive edges, providing all the necessary components for a complete and secure installation. This kit is ideal for enhancing the safety and functionality of automated systems. Kit Components Terminal Caps (TCT65) Connectors, complete with cable L=250cm (TCS250) Connectors 8.2 K0hm (TCER) Tin of glue (TCC) Tin of primer (TCP) Key Features Comprehensive kit for assembling 8 sensitive edges Includes terminal caps, connectors, glue, and primer Connectors with 250cm cable for easy installation 8.2 K0hm connectors for reliable performance High-quality glue and primer for secure assembly Product Description Nice&Safe Kit TCK for Sensitive Edge Assembly The Nice&Safe TCK Kit is a comprehensive solution for assembling up to 8 sensitive edges, essential for ensuring the safety and efficiency of automated systems. The kit includes terminal caps (TCT65), connectors with 250cm cables (TCS250), 8.2 K0hm connectors (TCER), a tin of glue (TCC), and a tin of primer (TCP), providing everything needed for a complete and secure installation. Reliable and Easy to Use Each component in the Nice&Safe TCK Kit is designed for ease of use and reliability. The connectors come with 250cm cables, allowing for flexible and straightforward installation. The 8.2 K0hm connectors ensure consistent and dependable performance, while the high-quality glue and primer included in the kit provide a strong and lasting assembly. Comprehensive Safety Solution By providing all necessary components for assembling sensitive edges, the Nice&Safe TCK Kit enhances the safety features of your automation systems. Whether for gates, doors, or other automated setups, this kit ensures that your sensitive edges are securely and effectively assembled.

ROGER TECHNOLOGY KIT EDGE1/22/UK - 36V Control Kit for 2 Brushless Motors

Product Overview The KIT EDGE1/22/UK is an advanced electronic control kit designed for managing two 36V brushless motors. It comes complete with a digital controller, plug-in radio receiver, transmitters, photocells, a flashing light, and an antenna, ensuring seamless operation and enhanced security for your automated gate systems. Key Features 36V digital controller for two brushless motors Includes plug-in radio receiver with 2 channels Comes with two 2-channel transmitters Synchronized external photocells (up to 4 pairs) LED flashing light for visual alerts High-performance antenna for reliable signal reception Product Description The KIT EDGE1/22/UK is specifically designed to provide robust control for two brushless motors operating at 36V. This kit is perfect for various applications, including swing and sliding gate systems, ensuring reliable and efficient performance. The inclusion of a digital controller and various accessories enhances the functionality and safety of your automated gate setup. What's in the Box 1 x EDGE1/Box Control Unit: Digital controller for managing two brushless motors. 1 x H93/RX22A/1 Plug-in Radio Receiver: Operates at 433.92 MHz with 2 channels for seamless operation. 2 x E80/TX52R/2 Transmitters: Dual-channel transmitters for remote control of your gate system. 1 x R90/F4ES Pair of External Photocells: Synchronized photocells for enhanced safety, supporting up to 4 pairs. 1 x R92/LED24 LED Flashing Light: Provides visual alerts during gate operation. 1 x R91/AN1/LR1 Antenna: Ensures reliable signal reception for optimal performance. Specifications ComponentDescription Control Unit EDGE1/Box for 2 Brushless Motors Radio Receiver H93/RX22A/1 Plug-in, 2 channels, 433.92 MHz Transmitters 2 x E80/TX52R/2, Dual-channel, 433.92 MHz Photocells R90/F4ES, Synchronized, Maximum 4 pairs Flashing Light R92/LED24 Antenna R91/AN1/LR1 Applications The KIT EDGE1/20 is ideal for controlling swing and sliding gate systems in both residential and commercial settings. Its advanced digital controller and comprehensive accessory package ensure efficient and secure operation.  

BFT RIGEL 6 Automatic Electric Gate Control Panel | For Hydraulic & Electric Swing Gates

Product Overview The RIGEL 6 Automatic Electric Gate Control Panel is a state-of-the-art 230V control panel designed to power both hydraulic and electric swing gate operators. This versatile control panel is suitable for managing single or double closing gate leaves, making it an ideal choice for both commercial and domestic applications. It is compatible with BFT’s U-Link communications platform, allowing for seamless integration and control of all your wireless features. Renowned for its security, reliability, and cutting-edge technology, the RIGEL 6 is our most popular automatic electric gate control panel. Key Features Compatible with hydraulic and electric swing gate operators Supports single and double gate leaves 230V power supply Integrates with BFT’s U-Link communications platform Electronic torque limiter Four-channel receiver with customizable settings Programming and diagnostics with display Latching capability Integrated obstacle detection with adjustable sensitivity Rolling code transmitter cloning Secure electronic locking Robust protective outer casing Approach speed slowdown Separate inputs for safety devices Thermostat-fitted motors to prevent overheating 7-day timer 2-year warranty Product Description The RIGEL 6 Automatic Electric Gate Control Panel offers advanced control and security features for managing hydraulic and electric swing gates. Its intelligent programming capabilities include an electronic torque limiter and a customizable four-channel receiver, ensuring optimal performance and flexibility. The integrated obstacle detection system and rolling code transmitter cloning enhance security, while the robust outer casing protects the unit from environmental factors. Intelligent Programming Features Electronic Torque Limiter: Adjusts the force applied by the gate operators to prevent damage and ensure safety. Four Channel Receiver: Customizable channels for versatile control over various functions. Programming and Diagnostics with Display: Easy setup and monitoring of the control panel’s functions. Security Features Latching Capability: Ensures gates remain securely closed. Integrated Obstacle Detection: Automatically stops gate movement if an obstacle is detected, with adjustable sensitivity. Rolling Code Transmitter Cloning: Provides secure and easy addition of new transmitters. Secure Electronic Locking: Prevents unauthorized access and enhances security. Robust Protective Outer Casing: Protects the control panel from environmental damage. Safety Features Obstacle Detection: Sensitivity can be adjusted to ensure safety and prevent accidents. Approach Speed Slowdown: Reduces the gate speed as it approaches the closed position to prevent damage. Separate Inputs for Safety Devices: Allows for the integration of additional safety devices. Thermostat-Fitted Motors: Prevents overheating by monitoring motor temperature. 7-Day Timer: Enables scheduling of gate operations for added convenience and security. Specifications Type: Electric Gate Control Panel for Hydraulic & Electric Swing Gate Operators Power Supply: 230V Compatibility: Single and Double Swing Gates Integrated Systems: BFT U-Link communications platform Warranty: 2 years Package Contents RIGEL 6 Automatic Electric Gate Control Panel All necessary fittings and parts Installation instructions Applications The RIGEL 6 Automatic Electric Gate Control Panel is ideal for both commercial and residential use. Its advanced features and robust design make it suitable for managing hydraulic and electric swing gates, ensuring secure, reliable, and efficient gate operation.

MICROTRONICS BlueForce Smart | Force Measurement Device for Automatic Gates and Doors

Product Overview The BlueForce Smart is an extraordinary force measurement device designed for CE certification of power-operated gates and doors. Compliant with standards EN12453 (former EN12445), EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms, this device represents an evolution of the acclaimed BlueForce and SpeedForce models. With revised design, packaging, and technology, the BlueForce Smart integrates the latest wireless functions, enabling interfacing with PCs and smartphones, leveraging advanced graphic potential and Internet connectivity. Key Features Compliant with EN12453, EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms Wireless functionality with Bluetooth/NFC Smart functions + App Interfaces with PC, tablet, or smartphone via USB or Bluetooth Integrated magnetic encoder with bus "2easy" (nonpolarized two-wire connection) Integrated positive stops, no need to install mechanical stops on the ground Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices 2-Year Warranty Product Description The BlueForce Smart is the latest force measurement device designed for the CE certification of automatic gates, barriers, and doors. It ensures compliance with EN12453 and DHF standards regarding force and stopping. This device allows you to take measurements at the gate, barrier, or door and access the data on a PC, tablet, or smartphone via USB or Bluetooth. Advanced Technology The BlueForce Smart is an evolution of the BlueForce and SpeedForce testers, featuring advanced wireless functions for seamless interfacing with modern devices. It includes powerful software that is user-friendly and compatible with Microsoft Windows, enabling easy data analysis and report generation. Comprehensive Kit The kit includes the BlueForce Smart instrument, Bluetooth/NFC Smart functions + App, a carry case with a pre-formed interior, a straight extension, a USB cable for PC connection, a hex wrench for handle disassembly, and downloadable instructions, software, and certificate of calibration from the download section. Software Features Guide to taking force tests, with application of the integrated legislation Downloading tests from the gauge memory and the Pocket PC, including via Bluetooth Viewing the impact curve and calculating parameters and averages Advanced graphics functions (zoom, limit mask, grid) Automatic evaluation of the measurement result Graphic representation of the measuring points for all types of doors/gates Customer and door/gate database management, with export/import functions Automatic test report generation for inclusion in the technical file Print option for reports and graphs in PDF Periodic software updates available online Technical Specifications Dimensions and Weight: 280x80x50mm - approx. 1.6 Kg Power supply: 9V alkaline battery Memory capacity: 80 tests Force acquisition interval: 6 sec, sampling at 1kHz Force measurement range: 0-2000N (mechanical stop at approx. 2100N) Force measurement resolution: 1N Dynamic time measurement resolution: 0.01s Maximum force measurement error margin: Range from 0 to 400N: +/-1% F.S Range from 400 to 1000N: +/-2% F.S Range from 1000 to 2000N: +/-4% F.S NFC interface: standard ISO/IEC 14443 and NFC Forum Type 4 (enabled as an option via password) BLE interface: Bluetooth version 4.1 (enabled as an option via password) USB interface: v.2.0 specification compliant CE-EMC conformity at TUV Rheinland on sample BlueForce instrument serial no.: 00981 Compliant with standards EN12445, EN12453, EN16005, EN60335-2-95 2-Year Warranty The BlueForce Smart comes with a 2-year warranty, ensuring reliability and peace of mind.

Nice Moonclever MC424L Control Panel | For Swing Gates | Compatible with Solemyo Solar Kit

Product Overview The Nice Moonclever MC424L control panel is specifically tailored for 24 Vdc Nice gear motors, providing advanced control features and compatibility with the Solemyo solar power kit. Product Description This control unit is engineered for use with specific Nice gate motors without encoders, such as the Wingo4024, Wingo5024, and X-Metro2020. It integrates seamlessly into existing setups, offering reliable performance and enhanced safety features. Key Features Compatible with 24 Vdc Nice gear motors: Wingo4024, Wingo5024, X-Metro2020. Supports the Solemyo solar power kit for energy-efficient operation. Intelligent obstacle detection ensures safety throughout gate travel. Advanced diagnostics with visual indicators via flashing lights and LEDs. Provision for connecting latest generation resistive sensitive edges for added security. What's in the Box Moonclever MC424L control unit, user manual, warranty information. Specifications Power Supply 24Vdc Compatible Motors Wingo4024, Wingo5024, X-Metro2020 Safety Features Obstacle detection, Sensitive edge connection Additional Features Solar power compatibility, Diagnostic LEDs

NICE Pair of wireless optical devices FT210B for sensitive edges - Wireless blueBus

To be fastened on moving door Wireless BlueBus Can be swivelled 210 degrees with BlueBus Technology Battery kit 10/15m Range

NICE Pair of Optical Devices FT210 for Sensitive Edges - wireless

To be fastened on moving doors Wireless can be swivelled through 210 degrees with relay output 10/15m range Battery Not included - Please see accosted products

FAAC E124 | Swing Gate Control Board for 24V Operators

Product Overview The FAAC E124 is a high-performance control board designed for swing gate operators with 24V motors. Known for its advanced programmability and flexibility, the E124 is compatible with all FAAC 24V swing gate systems and many other brands. It features extensive programming options, safety functions, and modern connectivity capabilities. Key Features Swing gate control board for 24V operators Additional programming features accessible via a device with a USB port Compatible with all FAAC 24V swing gate systems and other brands 10 standard logics customizable for unlimited programming 50 different power levels and 10 independent speeds for optimal performance Management of limit switches and encoders for safety and compliance Ultra sense function for obstacle detection with hydraulic operators Hold closed function to pulse leaves closed every 1 to 48 hours Cycle counter for regular servicing 32-bit processor with USB connectivity for software updates PC programming for advanced adjustments and real-time monitoring Built-in 6 events, 7-day timer with summertime adjustment Programmable inputs and outputs New BUS (2easy) technology compatibility Product Description The FAAC E124 Control Board is designed to provide robust and flexible control for swing gates equipped with 24V motors. This advanced control board supports both standard and complex installations, offering a wide range of programmable parameters to meet specific site requirements. The E124's high level of programmability includes 10 standard logics that can be customized, 50 power levels, and 10 speeds that can be varied independently. The control board features powerful motor outputs, allowing up to 36Vdc to be supplied to FAAC motors, resulting in higher speeds compared to other 24V boards. Safety and compliance are ensured through the management of limit switches and encoders, and the anti-crushing device conforms to European Directives, eliminating the need for a safety edge. Advanced features include an ultra sense function for obstacle detection, a hold closed function, and a cycle counter that tracks usage for maintenance purposes. The 32-bit processor platform allows for future software developments, which can be uploaded via a USB connector. PC programming facilitates access to all installation parameters, real-time system monitoring, and password protection options. The E124 control board is equipped with a built-in 6 events, 7-day timer, programmable inputs and outputs, and X-com technology for remote PC communication. The board's adjustable deceleration times, speed settings, and anti-wind feature ensure optimal operation in various conditions. Technical Specifications Power Supply: 24V Motor Compatibility: FAAC 24V swing gate systems and other brands Processor: 32-bit with USB connectivity Safety Features: Anti-crushing device, obstacle detection, hold closed function Programming: 10 standard logics, 50 power levels, 10 speeds, PC programming Timer: Built-in 6 events, 7-day timer Connectivity: BUS (2easy) technology, X-com technology What's in the Box: 1 x FAAC E124 Control Board Installation manual and hardware FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

GTE KMG-T Force Tester | Robust and Easy to Use

Product Overview The KMG-T by GTE Industrieelektronik GmbH isa professional force testing device used to measure dynamic and static forces on automatically operated doors, gates, and barriers. It ensures compliance with European safety standards (EN 12453 / EN 12445) and is essential for annual maintenance and safety inspections. Key Features Universal Service Tool: The KMG-T features a large memory and is an all-in-one product for maintenance checks, suitable for manufacturers and installers alike.  Cloud Integration: It connects seamlessly with the KMG-VISION.cloud software platform to help users prepare, perform, and digitally document test reports. [1] Compliance: It is designed specifically to assist in fulfilling legal requirements, such as measuring forces at crushing and shearing points.  Accessories: The device can be used in tandem with the KMG Distance Set, which allows users to easily measure closing forces at different required distances (e.g., 500 mm, 300 mm, 50 mm).

GTE Set KMG-LITEARM (300mm and 500mm adapters)

2 Year guarantee