NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

LOCINOX 3006J-H - Aluminium handle pair with 120 mm follower

3006J-H - Aluminium handle pair with 120 mm follower Handle pair in aluminium with square 120 mm spindle for insert locks. Special design avoids bumping of the hand against the stop plate Square 8 mm follower DRAWING

LOCINOX EGS | Economic Ground Stop for Drop Bolts | Ø20 mm Axle, Hot-Dip Galvanized

Product Overview The EGS Economic Ground Stop is a simple and cost-effective solution for securing drop bolts with a maximum axle diameter of Ø20 mm. Designed to be embedded in concrete, this ground stop features a hot-dip galvanized base-plate and a polypropylene catcher. The inclusion of a draining hole ensures efficient water drainage, preventing accumulation and potential damage. This economic ground stop is ideal for those seeking a durable and reliable option without the need for a stop plate. Key Features Simple and economic ground stop for drop bolts Designed for drop bolts with a maximum axle diameter of Ø20 mm Hot-dip galvanized base-plate for durability Polypropylene catcher for reliable performance Includes draining hole to prevent water accumulation Designed to be embedded in concrete Product Description Specifications Axle Diameter: Up to Ø20 mm Base-Plate Material: Hot-dip galvanized Catcher Material: Polypropylene Installation: To be embedded in concrete Additional Features: Includes draining hole The EGS Economic Ground Stop is a practical and affordable choice for securing drop bolts in various gate installations. Its hot-dip galvanized base-plate ensures long-lasting durability and resistance to corrosion, while the polypropylene catcher provides a secure and reliable hold for the drop bolt. Designed to be embedded in concrete, this ground stop is easy to install and provides a stable and secure stopping point for drop bolts with an axle diameter of up to Ø20 mm. The inclusion of a draining hole helps to prevent water accumulation, reducing the risk of damage and ensuring the longevity of the ground stop. This ground stop is a perfect choice for those looking for a simple and economic solution without compromising on quality and durability. Its straightforward design and robust materials make it a reliable option for a wide range of applications. NOTE: Images may differ from the actual product.

Locinox SFKM | Stainless Steel Surface Mounted Keep for Fortylock, Fiftylock, and Sixtylock | Square Profiles

Product Overview The Locinox SFKM is a stainless steel surface mounted keep designed for use with Fortylock, Fiftylock, and Sixtylock insert locks, specifically for square gate profiles. This aesthetically pleasing keep is ideal for small metal, aluminium, and PVC gates. Its limited 8 mm depth ensures a discreet look while providing robust functionality. The innovative Quick-Fix system ensures a fast and strong fixation, making installation quick and easy. This unique keep, when combined with the insert lock, ensures a strong gate anchoring for enhanced security and durability. Key Features Stainless steel keep for square profiles as of 40 mm Compatible with Fortylock, Fiftylock, Sixtylock, and Eightylock Extruded aluminium stop plate with rubber strip for long-term use Includes innovative Quick-Fix fixations and self-drilling screws Easy left or right changing Elegant design with a visible thickness of 8 mm Adjustable stop plate for 40 mm to 60 mm gate frames Adjustable guide to prevent damage to the day bolt and post Product Description Specifications Material: Stainless steel Compatibility: Fortylock, Fiftylock, Sixtylock, and Eightylock Profile Type: Square profiles as of 40 mm Stop Plate: Extruded aluminium with rubber strip Installation: Quick-Fix system with self-drilling screws Design: Visible thickness of 8 mm, elegant and discreet Adjustability: Adjustable stop plate for 40 mm to 60 mm gate frames, adjustable guide for day bolt The Locinox SFKM surface mounted keep is designed to offer a secure and aesthetically pleasing solution for various types of gates. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, equipped with a rubber strip, enhances the keep's longevity and functionality by reducing wear and noise. Installation is straightforward with the innovative Quick-Fix system, which includes self-drilling screws for a strong and fast setup. The keep is easily adjustable, allowing it to fit gate frames ranging from 40 mm to 60 mm. Additionally, the adjustable guide prevents damage to the day bolt and post, ensuring smooth and reliable operation. The elegant design of the SFKM, with its visible thickness of only 8 mm, ensures that it blends seamlessly with the gate, providing a discreet yet effective locking solution. This keep is perfect for small metal, aluminium, and PVC gates, and its compatibility with various insert locks makes it a versatile choice for enhancing gate security. NOTE: Images may differ from the actual product.

Locinox SAKL QF | Adjustable Stainless Steel Keep | Square or Round Profiles

Product Overview The Locinox SAKL QF is an adjustable stainless steel keep designed for use with square or round gate profiles. This robust keep is suitable for a wide range of gate types, including garden, ornamental, and industrial gates. Featuring a unique Quick-Fix system, the SAKL QF ensures a fast and strong mounting. The adjustable aluminium stop plate with a rubber strip accommodates gate profiles from 40 to 60 mm in width, providing a secure and reliable fit. The design has been refined to make the strike accept the latchbolt more easily, enhancing its functionality. Key Features Stainless steel bolt receiver for durability Extruded aluminium stop plate with rubber strip Easy left or right changing Innovative Quick-Fix mounting for fast installation Adjustable for gate profiles from 40 to 60 mm width Suitable for both rectangular and round profiles Product Description Specifications Material: Stainless steel bolt receiver, aluminium stop plate Mounting: Quick-Fix system Adjustability: Fits gate profiles from 40 to 60 mm width Profile Compatibility: Suitable for rectangular and round profiles Stop Plate: Aluminium with rubber strip The Locinox SAKL QF adjustable keep is designed to provide a secure and reliable solution for a variety of gate types. Its stainless steel construction ensures durability and resistance to environmental factors, making it suitable for outdoor use. The extruded aluminium stop plate, combined with a rubber strip, enhances the keep's ability to securely hold the gate in place while minimizing noise and wear. The innovative Quick-Fix system simplifies the installation process, allowing for a fast and strong mounting without the need for extensive tools or expertise. The SAKL QF is adjustable to fit gate profiles from 40 to 60 mm in width, providing versatility and compatibility with a wide range of gate designs. Additionally, the keep is designed for easy left or right changing, further enhancing its adaptability. This keep is ideal for garden, ornamental, and industrial gates, offering a reliable and aesthetically pleasing solution. The refined design ensures that the strike accepts the latchbolt easily, providing a smooth and secure locking mechanism. NOTE: Images may differ from the actual product.

LOCINOX B-MAG | Integrated Magnet Lock for Swing Gates | 250kg Holding Force

Product Overview The B-MAG Integrated Magnet Lock for Swing Gates offers a secure and aesthetically pleasing solution for gate locking needs. Designed to be assembled in the pole, this magnet lock remains invisible, maintaining maximum passage space while ensuring security. The Quick-Fix system allows for quick and easy installation. With a guaranteed tensile strength of 250 kg, the B-MAG lock withstands extreme weather conditions, and the rubber bumpers prevent gate shaking and damage. The flexible assembly of the armature plate ensures proper closing even if the gate is not perfectly aligned. Key Features Guaranteed holding force tested on every magnetic lock Minimal pulling force: 2500N (250 kg) 500h salt spray resistant - SGS certified (ISO 9227) Special two-layer protective coating developed for outdoor use Anti-residual magnetism kick-off system Current: 460mA / 12V or 230mA / 24V Voltage: 12V / 24V DC Quick-Fix system for easy installation Rubber bumpers to prevent gate shaking and damage Product Description The B-MAG surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Installation and Usage Installing the B-MAG magnet lock is straightforward with the Quick-Fix system, allowing for a quick and secure setup. The lock can be connected to either 12V or 24V DC power sources, accommodating different power requirements. The flexible armature plate assembly ensures that the gate closes properly even if it is not perfectly aligned, providing reliable security. The rubber bumpers further enhance stability by preventing gate shaking and reducing wear and tear. Durability and Protection The B-MAG magnet lock is built to withstand harsh environmental conditions, with a special two-layer coating that offers exceptional protection against corrosion. Its 500-hour salt spray resistance, certified by SGS (ISO 9227), ensures longevity and reliability in outdoor use. The anti-residual magnetism kick-off system prevents the lock from retaining magnetic force after disengagement, enhancing security and performance. These features make the B-MAG an ideal choice for securing swing gates in various settings.

LOCINOX MODULEC-SF | Surface Mounted Electric Strike | Forty, Fifty, Sixtylock

Product Overview The MODULEC-SF is a surface mounted electric strike designed for use with Forty, Fifty, and Sixtylock insert locks. This electric strike features a narrowed stop plate, making it ideal for various gate profiles. Its quick and easy installation is ensured by the patented Quick-Fix system, eliminating the need for drilling or laser-cutting the gate profile. The black anodized housing provides corrosion and scratch resistance, ensuring long-lasting durability. The MODULEC-SF is available in two versions: Emissa (Fail Close) and Ruptura (Fail Open), and can be connected to both 12V-24V AC/DC. Key Features Tested up to 500,000 movements Fast and easy fixing with Quick-Fix Resistance to pressure on the latch bolt: 300 kg Easy left or right changing Corrosion-resistant black anodized aluminum housing Adjustable for gate profiles: 40-60 mm width Voltage: 12V-24V AC/DC Consumption: 12V - 1.25A / 24V - 0.62A Power: 15W Available in two colours: RAL 9005 & ALUM Product Description The MODULEC-SF surface mounted electric strike offers a secure and durable solution for gates equipped with Forty, Fifty, and Sixtylock insert locks. Its narrowed stop plate and Quick-Fix installation system make it an ideal choice for efficient and hassle-free setup. The black anodized aluminum housing ensures long-term resistance to corrosion and scratches, making it suitable for various environmental conditions. Specifications Versions: Emissa (Fail Close), Ruptura (Fail Open) Durability: Tested up to 500,000 movements Pressure Resistance: 300 kg on the latch bolt Installation: Easy mounting with Quick-Fix Installation and Usage Installing the MODULEC-SF is straightforward with the Quick-Fix system, allowing for rapid and secure attachment to gate profiles. The electric strike is designed for easy left or right changing, providing flexibility in installation. Compatible with both 12V and 24V AC/DC power supplies, the MODULEC-SF is versatile and adaptable to different power setups. The adjustable gate profile width of 40-60 mm ensures compatibility with a range of gate designs. Durability and Protection The MODULEC-SF electric strike is built to withstand rigorous use, tested up to 500,000 movements. Its robust construction includes a black anodized aluminum housing that resists corrosion and scratching, ensuring longevity and reliability. The strike's resistance to 300 kg of pressure on the latch bolt provides added security, making it an excellent choice for high-security applications. Available in RAL 9005 and ALUM colors, the MODULEC-SF combines functionality with aesthetic versatility.

LOCINOX INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit)

INTERIO Invisible, built-in hydraulic gate closer (optional mounting kit) The invisible Interio gate closer, with matching hinge set, is completely built into the gate frame. This highly aesthetic solution opens and closes the gate comfortably. The integrated pre-tension ensures an efficient and flawless installation where speed and final snap can be adjusted accurately to fit any need. A constant closing speed is guaranteed in all weather conditions, without any adjustments needed. Interio is perfectly suited for both left and right turning gates. Is available on it's own or with ground or wall mounting kit.   SPECIFICATIONS Self-closing up to 125° (depending on the situation) with adjustable closing speed and final snap Powder coated aluminium housing Constant closing speed in hot or cold weather Vandal-proof For left & right turning gates Available for 50 and 60 mm profiles with max 2 mm thickness Secure, fast and easy attachment thanks to Quick-Fix mounting bolts Optional sets available for ground and wall installation Recommended with Gatestop Easy to open: Max. 20 Nm DRAWING

KEY AUTOMATION 14A Control Board | Control Units for 24V Automation Systems

Product Overview The 14A Control Board is a state-of-the-art control unit designed to manage all 24V automation systems efficiently. This unit features the NIGHT LIGHT SYSTEM, allowing for automatic control of LED lights during night hours. It requires either a DYL display or the KUBE PRO wireless module for programming. The 14A control board supports up to 20 additional LED lights, providing an economical and automated lighting solution for your entrance during the night. Key Features Latest generation control unit for all 24V automation systems NIGHT LIGHT SYSTEM for LED light control during night hours Mandatory DYL display or KUBE PRO wireless module for programming Supports up to 20 additional LED lights Amperometric obstacle detection with run inversion Standard or programmable slowdown in opening and closing Programmable automatic partial closing Separate OPEN-STOP-CLOSE inputs and PP - PARTIAL input Inputs and safety devices LED visualization Optional test for safety edge LED courtesy light output Open gate indicator output Plug-in programmable radio receiver with 4 channels Flashing light output with user indicator Electro lock output Optional battery backup Product Description Models CodeDescription 14AB2 Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA - mandatory for motors RAY4024E, UND24, SN-50-24, SN5024B 14AB2F Control unit in box for two 24Vdc motors (without DYL and without receiver RX4K) with transformer 250 VA to be paired with fast line motors MA24 Logic mainboard PO24 Power module 24Vdc 10A BOX250 Box with transformer 250 VA Operator Specifications ModelInput Power [Vac/Hz]Output Power [Vdc]Max Motor Power [W]Max Working Time [sec]Max Pause Time [sec]Obstacle DetectionProtection DegreeDimensions [mm]Working Temperature [°C] 14AB2 / 14AB2F 230/50 24 300 240 900 Yes IP54 222 x 275 x 110 -20 + 55

GATEMASTER APS Hydraulic Gate Closer & Hinge Kit | Safe & Reliable Self-Closing Gates

Product Overview The APS Hydraulic Gate Closer & Hinge Kit is designed to provide safe and reliable gate closing using proven hydraulic technology. This kit is ideal for gates that need to be self-closing, ensuring security and convenience without the need for power. The kit comes with either a standard wrap-around hinge (APS) or a stop hinge (APSSTOP) that prevents the gate from opening more than 100°. Key Features Hydraulic gate closer and top hinge kit for self-closing gates Suitable for gates up to 150kg No power required Fully adjustable ROSPA compliant closing speed with closing and latching speed adjustments Robust closer unit fitted underneath the gate, acts as a load-bearing lower hinge Unobtrusive and highly vandal-resistant design Includes a top hinge assembly that is fully adjustable for correct gate positioning Product Description The APS Hydraulic Gate Closer & Hinge Kit is an advanced solution for gates requiring reliable and safe self-closing functionality. The hydraulic closer and hinge kit is suitable for gates weighing up to 150kg and does not require any power source, making it an efficient and eco-friendly choice. The closer unit, fitted underneath the gate, also serves as a load-bearing lower hinge, ensuring robustness and stability. The kit includes fully adjustable closing and latching speed settings, compliant with ROSPA standards, to provide controlled and safe gate operation. The hydraulic gate closer is unobtrusive and highly resistant to vandalism, ensuring long-lasting durability and security. Additionally, the top hinge assembly is fully adjustable, allowing for precise gate positioning after installation. The APS kit comes in two versions: APS: Hydraulic gate closer with standard wrap-around hinge APSSTOP: Kit with a special stop hinge to prevent the gate from opening more than 100°, protecting the closer from damage Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Attach the hydraulic gate closer unit underneath the gate, ensuring it acts as the load-bearing lower hinge. Install the top hinge assembly, adjusting as necessary to position the gate correctly. Adjust the closing and latching speed settings to ensure safe and controlled gate operation. Maintenance Regular maintenance will ensure the longevity and proper functioning of the APS Hydraulic Gate Closer & Hinge Kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the closer and hinges for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription APS Hydraulic gate closer with standard wrap-around hinge APSSTOP Kit with special stop hinge to prevent gate from opening more than 100°, protecting the closer from damage Dimensions Specific dimensions are available upon request or from the product specifications sheet. For more information, refer to the specification sheet available for download.

GATEMASTER BSKG Superlock Gapless Keep

Gatemaster BSKG Superlock gapless keep The gapless keep is a great option when there is a small gap between the gate and the post, acting as both a security measure and a gate stop. Simply drill two holes in the post and bolt on with our innovative expanding fasteners. Requires a minimum of a 15mm gap between the gate and the post.

ROLLING CENTRE Magnum2 Kit 2 | Cantilever Gates Up to 18m Opening & 2200kg Weight

Product Overview The Magnum2 Kit 2 is designed for cantilever gates with clear openings up to 18m and a maximum weight of 2200kg. Magnum 2 cantilever gate systems are widely used in commercial, public sector, and industrial environments due to their robustness and high level of security. The cantilever mechanism allows for intensive use, making it a reliable solution for demanding applications. Key Features Clear gate openings up to 18m Supports gates up to 2200kg No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum2 Kit 2 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 18m in clear opening and 2200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum2 Kit 2 includes the following components: 4 x 6m GIPI 4RM2C6 Magnum 2 Hot Galvanised Track 2 x CA4RMS2 8-Wheeled Magnum2 Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum2 Carriage Drawing Magnum2 Carriage Table Magnum2 Meeting Point Drawing Magnum2 Meeting Point Table Magnum2 Support Wheel Drawing Magnum2 Support Wheel Table Magnum2 Track Drawing Magnum2 Track Table The components included in the Magnum2 Kit 2 are constructed from high-grade materials to ensure durability and longevity. The hot-dip galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 4 | Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 4 is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments due to their robustness and high security. The cantilever mechanism allows for intensive use, making it a reliable solution for demanding applications. Key Features Clear gate openings up to 16m Supports gates up to 1200kg No track needed No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 4 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum Kit 4 includes the following components: 1 x 3m GIPI 6RMZ3 Magnum Zinc Galvanised Track 1 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x CA4RMS 8-Wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 4 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 3 | Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 3 is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments where intensive use and high security are required due to the robustness and reliability of the cantilever mechanism. The cantilever system provides numerous benefits, including no requirement to lay track, minimal ground work, low maintenance, and a high level of security. Key Features Clear gate openings up to 16m Supports gates up to 1200kg No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 3 cantilever gate system provides a robust and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their minimal site preparation requirements and ease of installation. The absence of a need for a ground track reduces both the installation labor cost and ongoing maintenance, making this system particularly suited for areas where routine ground cleaning is challenging. The Magnum Kit 3 includes the following components: 4 x 3m GIPI 6RMZ3 Magnum Zinc Galvanised Track 2 x CA4RMS 8-Wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Magnum Kit 2 | Silent Cantilever Gates Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 2 Silent Kit is designed for cantilever gates with clear openings up to 16m and a maximum weight of 1200kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Cantilever gate systems are the ideal choice for commercial, public sector, and industrial environments where intensive use and high security are required due to the robustness and reliability of the cantilever mechanism. Key Features Clear gate openings up to 16m Supports gates up to 1200kg 35% less noise with silent cantilever systems No track required No ground work required Low maintenance High level of security Suitable for intensive use Product Description The Magnum Kit 2 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various demanding environments. Designed to support gates up to 16m in clear opening and 1200kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages, making the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Magnum Kit 2 includes the following components: 2 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x Silent M 8-wheeled Silent Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications: Magnum Carriage Drawing Magnum Meeting Point Drawing Magnum Meeting Point Table Magnum Support Wheel Drawing Magnum Support Wheel Table Magnum Track Drawing Magnum Track Table MAGNUMKIT GIPI6 RMZ6 Dimensions The components included in the Magnum Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

DEA IRONBOX Vandal-proof Box for REV and GULLIVER with Magnetic Limit Switch and Foundation Plate (IRONBOX, IRONBOX/XS)

Product Overview The IRONBOX and IRONBOX/XS vandal-proof boxes are designed to protect sliding gate motors and their electronic components. Suitable for collective sliding gates (REV in the IB version) and industrial sliding gates (GULLIVER in the IB version), these boxes offer robust protection and an elegant design. The IRONBOX/XS is compact, making it ideal for installations with limited space or requiring a specific design aesthetic. Key Features Vandal-proof design made of steel Equipped with a magnetic limit switch for precise stopping Customized access key for added security Spacious interior for easy installation and maintenance Essential design for clean and tidy installations Product Description The IRONBOX series offers unparalleled protection for your gate automation systems. Made from painted steel, these boxes are designed to prevent tampering and vandalism, ensuring that your motors and electronic components remain safe. The customized access key adds an extra layer of security, making unauthorized access nearly impossible. Both IRONBOX and IRONBOX/XS come with a magnetic limit switch, which ensures accurate stopping during both opening and closing operations. The larger IRONBOX model provides ample working space for complex installations and maintenance, while the IRONBOX/XS is tailored for simpler installations with its compact size of only 36 cm wide, 60 cm high, and 22 cm deep. Installation is straightforward, with a significant working area in the IRONBOX and adequate room in the IRONBOX/XS for professional maneuvering during setup and maintenance. Both models include an internal fixing plate for organizing the control panel and electronic devices, ensuring a practical, fast, and orderly setup. Product Guide Product CodeProductDescription 619080 IRONBOX RAL 9006 painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 594 x 1002 x 280 mm (without pinion). 619100 IRONBOX/XS Painted steel vandal-proof box for REV and GULLIVER with magnetic limit switch and foundation plate. Dimensions: 359 x 607 x 219 mm (without pinion). Accessories Foundation Base (ROCK/FB) Magnetic Limit Switch Note: For more details, see the product brochure in the manual. Contact us at 01564 731035 for discounts and to specify other details of the purchase.

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

V2 Gate Automation V2 Flexy2 230Vac | Analog Control Unit for Swing & Sliding Gates | Built-in Receiver & Advanced Safety

Product Overview The V2 Flexy2 230Vac is an analog control unit designed for managing both swing gates (single and double leaf) and sliding gates. This unit features adjustment and programming via trimmer and dip-switch, making it a reliable and straightforward solution for gate automation. It supports a 230V power supply for two single-phase motors and includes a built-in receiver, adding convenience and efficiency to its operation. Key Features Analog control unit for swing and sliding gates 230V power supply for 2 single-phase motors Adjustment and programming by trimmer and dip-switch Built-in receiver (433.92 MHz) Stores up to 240 Personal Pass transmitters RJ45 connector for PROG2 programmer connection Start, pedestrian start, and stop controls from the transmitter Open/close limit switch inputs 230V flashing light output with intermittency Courtesy light output controllable by transmitter Safety device test before any opening Leaf slow-down function in limit switch area Monitoring of input status shown by LEDs Product Description The V2 Flexy2 230Vac analog control unit is a robust solution for the automation of swing and sliding gates. This unit is powered by a 230V supply and can control two single-phase motors, making it suitable for various gate configurations. Its adjustment and programming are easily managed through trimmer and dip-switch settings, offering simplicity and reliability. The built-in receiver operating at 433.92 MHz enhances convenience, allowing for seamless integration with up to 240 Personal Pass transmitters. This feature ensures that multiple users can operate the gate efficiently. The RJ45 connector facilitates connection to the PROG2 programmer via a standard network cable (UTP), providing additional programming capabilities. Control options include start, pedestrian start, and stop commands from the transmitter, offering flexibility in gate operation. The unit supports open/close limit switch inputs, ensuring precise control of gate movements. A 230V flashing light output, designed for use with intermittent flashing lights, provides clear visual indicators during gate operation. For enhanced safety, the Flexy2 performs a safety device test before any gate movement, ensuring all components are functioning correctly. The leaf slow-down function in the limit switch area reduces noise and mechanical stress, ensuring smooth and quiet gate closures. The courtesy light output can be controlled by the transmitter, adding convenience and enhancing security. Monitoring of input status is facilitated by LEDs, providing clear and immediate feedback on the system's operational state. Overall, the V2 Flexy2 230Vac analog control unit combines straightforward programming, robust performance, and advanced safety features, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY2+ 24Vdc | Digital Control Unit for Swing & Sliding Gates | Advanced Programming & Safety Features

Product Overview The V2 CITY2+ 24Vdc is a digital control unit designed for managing both swing gates (single and double leaf) and sliding gates equipped with 24Vdc motors. This unit features advanced programming capabilities, safety measures, and energy-efficient functions, ensuring reliable and efficient operation of your gate systems. It is suitable for both residential and commercial applications, providing comprehensive control and monitoring functionalities. Key Features Digital control unit for swing and sliding gates with 24Vdc motors Programming achieved using 3 program buttons and display Plug-in adapter for modular radio receiver Start, pedestrian start, and stop transmitter controls Auxiliary channel management from the transmitter Emergency pack battery input Encoder input Low voltage output for warning light or 24V flashing light Safety device test before any opening Amperometric sensor obstacle detection function with programmable threshold Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Monitoring of input status using the display ADI connector for connecting optional modules Product Description The V2 CITY2+ 24Vdc digital control unit is engineered for efficient and secure management of swing and sliding gates powered by 24Vdc motors. The unit facilitates easy programming with three buttons and a display interface, ensuring user-friendly operation and configuration. This control unit supports a plug-in adapter for a modular radio receiver, enabling wireless control with start, pedestrian start, and stop functions from the transmitter. Additionally, it includes auxiliary channel management, expanding its versatility in different applications. For enhanced safety, the CITY2+ features an emergency pack battery input and an encoder input, providing reliable performance even during power outages. The low voltage output is designed for a warning light or a 24V flashing light, offering clear visual indicators of gate activity. The unit conducts a safety device test before any gate movement, ensuring all components are functioning correctly. Its amperometric sensor obstacle detection function, with a programmable threshold, enhances safety by preventing collisions. Maintenance is made simple with an operational cycle counter and programmable reminders, helping to keep the system in optimal condition. The leaf slow-down function in the limit switch area reduces noise and mechanical stress during gate closure, ensuring smooth and quiet operation. Monitoring and diagnostics are streamlined through the display that shows input status, while the ADI connector allows for the connection of optional modules, enhancing the unit's functionality and adaptability. Overall, the V2 CITY2+ 24Vdc digital control unit combines advanced technology, robust safety features, and user-friendly programming, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY1 EVO 230V | Digital Control Unit for Swing & Sliding Gates | Advanced Safety & Energy Efficiency

Product Overview The V2 CITY1 EVO 230V is a digital control unit designed to manage both swing gates (single and double leaf) and sliding gates. With its advanced programming capabilities, safety features, and energy-saving functions, this unit ensures reliable and efficient gate operation. It supports a 230V power supply for two single-phase motors equipped with ENCODER technology, making it an ideal choice for both residential and commercial gate automation needs. Key Features Digital control unit for swing and sliding gates 230V power supply for 2 single-phase motors with ENCODER Plug-in adapter for modular radio receiver MR2 Start, pedestrian start, and stop controls from the transmitter Safety device test before any opening 230V flashing light output with intermittency Self-learning operating time function Obstacle detection function Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Slow start function during opening Monitoring of input status using the display ADI 2.0 connector for advanced ADI device management USB connector for PC connectivity, firmware updates, and diagnostics LOW ENERGY module connector for electrical energy savings Product Description The V2 CITY1 EVO 230V digital control unit is a high-performance solution for managing swing and sliding gates. Designed to handle single and double leaf swing gates as well as sliding gates, this unit offers versatile and robust control capabilities. It is powered by a 230V supply and supports two single-phase motors equipped with ENCODER technology for precise and smooth operation. Programming the CITY1 EVO is straightforward, using three program buttons and a clear display interface. This user-friendly approach ensures easy setup and adjustment to meet specific operational requirements. Key safety features include a test of the safety devices before any gate movement, and an obstacle detection function that prevents collisions. The unit also features a self-learning operating time function, which optimizes performance by adapting to the gate's characteristics. The control unit is compatible with a modular radio receiver MR2, allowing for wireless control with start, pedestrian start, and stop functions accessible from the transmitter. A 230V flashing light output, intended for use with intermittent flashing lights, provides clear visual indicators during gate operation. Maintenance is simplified with an operational cycle counter and programmable reminders, ensuring the system remains in optimal condition. The unit's leaf slow-down function in the limit switch area reduces noise and mechanical stress, while the slow start function during opening further enhances smooth operation. Monitoring and diagnostics are facilitated through a display that shows input status, and the ADI 2.0 connector allows for advanced management of ADI devices. Additionally, a USB connector enables connection to a PC for detailed programming, firmware updates, and operation diagnostics. For energy efficiency, the LOW ENERGY module connector helps reduce power consumption by deactivating non-essential components when the gate is not in motion. This feature contributes to lower energy costs and enhanced sustainability. Overall, the V2 CITY1 EVO 230V digital control unit combines advanced technology, comprehensive safety features, and energy-saving functionalities, making it a top choice for modern gate automation systems.

LOCINOX Roger Technology PANTHER | All-Round Hydraulic Gate Closer | Wall and Post Mounting

Product Overview The PANTHER hydraulic gate closer is a versatile solution designed for easy installation on walls and posts. It ensures precise closing with an adjustable speed and final snap, making it suitable for various gate configurations. Key Features Self-closing gate closer with adjustable speed and final snap Closing speed unaffected by temperature changes Aesthetic and compact design Scratch-resistant and corrosion-free anodized aluminium housing Closing force over the full 120° opening angle Designed to be installed above the gate or between two pillars Integrated pre-tension for smooth installation Quick-Fix and wall anchors included Suitable for left and right turning gates Easy to open: Max. 19 Nm Recommended with Gatestop Product Description The PANTHER hydraulic gate closer by Roger Technology is designed to enhance the functionality and durability of your gates. With adjustable speed and final snap, it ensures precise and reliable closing every time. The closing speed remains consistent regardless of temperature changes, providing dependable performance in various weather conditions. Featuring an aesthetic and compact design, the PANTHER gate closer is housed in scratch-resistant and corrosion-free anodized aluminium. It delivers a closing force over the full 120° opening angle, making it suitable for a wide range of gate types and sizes. The closer can be installed above the gate or between two pillars, offering flexibility in installation options. Integrated pre-tension simplifies the installation process, while the included Quick-Fix and wall anchors ensure a secure and stable setup. The PANTHER gate closer is suitable for both left and right turning gates and is easy to open with a maximum force of 19 Nm. For optimal performance, it is recommended to use the closer with a Gatestop. Technical Support Enhance the functionality and durability of your gates with the PANTHER hydraulic gate closer. Its robust construction and weather-resistant features ensure reliable operation under various conditions. For more details or to purchase, contact us today. Our team is ready to assist you with any inquiries. RAL Colour Availability For specific RAL colour options, please contact us to discuss your requirements. Drawing For detailed technical drawings, please reach out to our support team for assistance.     DRAWING

LOCINOX OGS Adjustable Stop Plate for 40 mm to 60 mm Gate Frames - Compatible with ELECTRADROP and KEYDROP

Product Overview The OGS Adjustable Stop Plate is a robust ground stop designed for double-wing gates, compatible with surface-mounted drop bolts including VSF, VSA, ELECTRADROP, and KEYDROP systems. It features adjustable settings to accommodate gate frames ranging from 40 mm to 60 mm in depth. Key Features Strong ground stop for double-wing gates Adjustable plate fits gate frames from 40 mm to 60 mm Glass fibre reinforced polypropylene construction Removable polyamide cleaning recipient for easy maintenance Includes water evacuation hose Specifications Material: Glass fibre reinforced Polypropylene Gate Frame Compatibility: 40 mm to 60 mm Cleaning Recipient: Removable polyamide Water Evacuation: Yes, with hose Technical Drawing Technical drawings for the OGS Adjustable Stop Plate are available upon request. These drawings illustrate dimensions and installation details to ensure proper integration with your gate system. Additional Information For more information about the OGS Adjustable Stop Plate or to discuss compatibility with your specific gate system, please contact us. Our team is ready to assist with any questions you may have.   DRAWING

BFT RIGEL 6 Automatic Electric Gate Control Panel | For Hydraulic & Electric Swing Gates

Product Overview The RIGEL 6 Automatic Electric Gate Control Panel is a state-of-the-art 230V control panel designed to power both hydraulic and electric swing gate operators. This versatile control panel is suitable for managing single or double closing gate leaves, making it an ideal choice for both commercial and domestic applications. It is compatible with BFT’s U-Link communications platform, allowing for seamless integration and control of all your wireless features. Renowned for its security, reliability, and cutting-edge technology, the RIGEL 6 is our most popular automatic electric gate control panel. Key Features Compatible with hydraulic and electric swing gate operators Supports single and double gate leaves 230V power supply Integrates with BFT’s U-Link communications platform Electronic torque limiter Four-channel receiver with customizable settings Programming and diagnostics with display Latching capability Integrated obstacle detection with adjustable sensitivity Rolling code transmitter cloning Secure electronic locking Robust protective outer casing Approach speed slowdown Separate inputs for safety devices Thermostat-fitted motors to prevent overheating 7-day timer 2-year warranty Product Description The RIGEL 6 Automatic Electric Gate Control Panel offers advanced control and security features for managing hydraulic and electric swing gates. Its intelligent programming capabilities include an electronic torque limiter and a customizable four-channel receiver, ensuring optimal performance and flexibility. The integrated obstacle detection system and rolling code transmitter cloning enhance security, while the robust outer casing protects the unit from environmental factors. Intelligent Programming Features Electronic Torque Limiter: Adjusts the force applied by the gate operators to prevent damage and ensure safety. Four Channel Receiver: Customizable channels for versatile control over various functions. Programming and Diagnostics with Display: Easy setup and monitoring of the control panel’s functions. Security Features Latching Capability: Ensures gates remain securely closed. Integrated Obstacle Detection: Automatically stops gate movement if an obstacle is detected, with adjustable sensitivity. Rolling Code Transmitter Cloning: Provides secure and easy addition of new transmitters. Secure Electronic Locking: Prevents unauthorized access and enhances security. Robust Protective Outer Casing: Protects the control panel from environmental damage. Safety Features Obstacle Detection: Sensitivity can be adjusted to ensure safety and prevent accidents. Approach Speed Slowdown: Reduces the gate speed as it approaches the closed position to prevent damage. Separate Inputs for Safety Devices: Allows for the integration of additional safety devices. Thermostat-Fitted Motors: Prevents overheating by monitoring motor temperature. 7-Day Timer: Enables scheduling of gate operations for added convenience and security. Specifications Type: Electric Gate Control Panel for Hydraulic & Electric Swing Gate Operators Power Supply: 230V Compatibility: Single and Double Swing Gates Integrated Systems: BFT U-Link communications platform Warranty: 2 years Package Contents RIGEL 6 Automatic Electric Gate Control Panel All necessary fittings and parts Installation instructions Applications The RIGEL 6 Automatic Electric Gate Control Panel is ideal for both commercial and residential use. Its advanced features and robust design make it suitable for managing hydraulic and electric swing gates, ensuring secure, reliable, and efficient gate operation.

LOCINOX ELECTRADROP Motorized Electrical Drop Bolt | 24V | Multiple Fail Options

Product Overview The ELECTRADROP motorized electrical drop bolt is a 24V solution designed for the safe and secure locking of automated swing gates. With a throw of 115 mm, this drop bolt helps disburden the electric gate motors, ensuring a reliable and secure lock. The Electradrop features a vandal-proof, powder-coated aluminum housing and integrates seamlessly with gate automation systems. Key Features 24V motorized drop bolt with 115 mm throw Vandal-proof, powder-coated aluminum housing Automatic detection and memorization of continuous or pulse signals Mechanical release possible by key in case of emergency Integrated obstacle detection to prevent injuries Power consumption: Normal: 25 W / Peak: 48 W / Standby: 0.2 W 5 m cable included Includes 3012-37-STD cylinder Connects to a Locinox PowerStone 60W Product Description The ELECTRADROP motorized electrical drop bolt is an essential component for enhancing the security of automated swing gates. This electric 24V drop bolt, with a 115 mm throw, provides a robust locking mechanism that helps alleviate the burden on electric gate motors, ensuring longer lifespan and reliability of your gate system. Durable and Vandal-Proof The Electradrop features a powder-coated aluminum housing that is both durable and vandal-proof, making it suitable for various environmental conditions and resistant to tampering. Seamless Integration and Operation Designed for easy integration with automated gate systems, the Electradrop can be connected to the warning light on automated gates (requires a minimum 3-second prewarning signal) or directly to the gate automation system. It supports automatic detection and memorization of continuous or pulse signals, ensuring smooth operation. Safety and Emergency Features The Electradrop includes integrated obstacle detection that automatically stops the drop bolt movement in case of overpressure, preventing injuries. In case of emergency, a mechanical release by key is possible. Specifications Throw: 115 mm Drop bolt diameter: 20 mm Suitable for gate profiles: 40 mm or more Power consumption: Normal: 25 W / Peak: 48 W / Standby: 0.2 W Included cable length: 5 m Included: 3012-37-STD cylinder Connects to Locinox PowerStone 60W RAL Colour Availability The Electradrop is available in various RAL colors to match your gate's aesthetic. The product chart below details the different models and their specific features: Product Chart Product CodeDescription ELECTRADROP-R-ZILV Motorized electrical drop bolt with Fail Open functionality and integrated emergency batteries in Silver ELECTRADROP-R-9005 Motorized electrical drop bolt with Fail Open functionality and integrated emergency batteries in RAL 9005 ELECTRADROP-E-ZILV Motorized electrical drop bolt with Fail Close functionality in Silver ELECTRADROP-E-9005 Motorized electrical drop bolt with Fail Close functionality in RAL 9005 ELECTRADROP-R-P-ZILV Motorized electrical drop bolt with bolt position detection, Fail Open functionality, and integrated emergency batteries in Silver ELECTRADROP-R-P-9005 Motorized electrical drop bolt with bolt position detection, Fail Open functionality, and integrated emergency batteries in RAL 9005 ELECTRADROP-E-P-ZILV Motorized electrical drop bolt with bolt position detection and Fail Close functionality in Silver ELECTRADROP-E-P-9005 Motorized electrical drop bolt with bolt position detection and Fail Close functionality in RAL 9005 ELECTRADROP-ZILV Motorized electrical drop bolt in Silver ELECTRADROP-9005 Motorized electrical drop bolt in RAL 9005 Applications The Electradrop motorized electrical drop bolt is ideal for securing automated swing gates in residential, commercial, and industrial settings. Its advanced features, robust design, and multiple fail options make it a reliable and secure solution for any automated gate system.

NICE Pair of Outdoor Photocells EPM | 15m Range |

Product Overview The Nice Era EPM medium-sized outdoor photocells are designed with self-alignment technology, making them perfect for residential and industrial settings. These photocells feature a stylish and sturdy design, offering reliable obstacle detection with a range of up to 15 meters and an 8-degree receiving angle.  Key Features Medium-sized photocells with self-alignment technology 15-meter range with an 8-degree angle of reception Antiglare circuit to eliminate sunlight interference Stylish and sturdy ABS body, resistant to all conditions Relay photocell with a power supply of 14 VAC/DC Product Description The Nice Era EPM photocells are essential for enhancing the safety and efficiency of automated gate and garage door systems. Designed for both residential and industrial applications, these photocells offer a range of up to 15 meters and feature self-alignment technology for easy setup. The 8-degree receiving angle ensures accurate detection of obstacles, while the antiglare circuit prevents interference from sunlight. Stylish and Sturdy Design The EPM photocells boast a stylish and sturdy design with an ABS body that is resistant to various weather conditions. This durability ensures long-lasting performance, making them suitable for both indoor and outdoor installations. Reliable Obstacle Detection The EPM photocells provide reliable obstacle detection, enhancing the safety of automated systems by preventing accidents and ensuring smooth operation. The relay photocell design ensures that any interruption in the light beam will change the receiver's status, sending a signal to stop or reverse the gate or door. Specifications Range: 15 meters Angle of Reception: 8 degrees Antiglare Circuit: Yes Material: ABS body Power Supply: 14 VAC/DC Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPM photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, reliable performance, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

Pair of Outdoor Burglar-Resistant BlueBUS Photocells with Metal Body | Nice EPSAB

Product Overview The Nice EPSAB BlueBUS Photocells are advanced, burglar-resistant photocells designed to enhance the safety and security of automated garage doors and gates. Featuring a durable aluminum reinforced housing and a range of up to 15 meters, these photocells provide reliable obstacle detection and are essential for any automated system. The BlueBUS system ensures easy installation with just two wires connecting the controller and accessories. Key Features Burglar-resistant design with reinforced aluminum housing Compatible with Nice BlueBUS system Range of up to 15 meters under normal conditions Self-alignment feature for easy installation Slim design for unobtrusive placement Relay contact signal when photocell beam is engaged Includes receiver and transmitter modules Simple two-wire connection for controller and accessories Product Description The Nice EPSAB BlueBUS Photocells are essential safety devices for any automated gate or garage door system. With a range of up to 15 meters and a burglar-resistant metal body, these photocells ensure reliable obstacle detection and enhance the security of your property. The self-alignment feature simplifies installation, and the BlueBUS system allows for easy connections using just two wires. Durable and Secure Design The EPSAB photocells feature a reinforced aluminum housing, providing enhanced durability and resistance to tampering. This makes them an excellent choice for high-security applications, ensuring that your automated system remains safe and reliable. Advanced Functionality Equipped with a self-alignment feature, the EPSAB photocells are easy to install and adjust, ensuring accurate detection of obstacles. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring the gate or door stops or reverses to avoid collisions. Easy Installation with BlueBUS The BlueBUS system simplifies the installation process by allowing all connections between the controller and accessories to be performed using just two wires. This reduces installation time and effort, making the EPSAB photocells a convenient and efficient choice for any automated system. Specifications Range: Up to 15 meters Compatibility: Nice BlueBUS system Material: Reinforced aluminum housing Design: Slim Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPSAB BlueBUS Photocells are ideal for use in residential, commercial, and industrial automated gate and garage door systems. Their burglar-resistant design and reliable performance make them a valuable addition to any automated setup, ensuring enhanced safety and security.

Pair of Outdoor Photocells EPSB "Slim" | Connections via Nice BlueBUS

Product Overview The Pair of Outdoor Photocells EPSB "Slim" are designed for enhanced safety and security in automated gate and garage door systems. Featuring a 15-meter range and compatibility with Nice BlueBUS connections, these photocells provide reliable obstacle detection with advanced features like an antiglare circuit and a durable ABS body resistant to various weather conditions. Key Features Compatible with Nice BlueBUS connections 15-meter range Antiglare circuit to eliminate sunlight interference 8-degree angle of reception Durable ABS body resistant to all weather conditions Slim design for easy installation Product Description The Slim Outdoor Photocells EPSB are an essential component for ensuring the safety and efficiency of your automated gate or garage door system. With a range of up to 15 meters, these photocells detect obstacles and help prevent accidents by signaling the gate or door to stop or reverse when an obstruction is detected. Their compatibility with Nice BlueBUS connections ensures seamless integration into your existing automation system. Advanced Features These photocells are equipped with an antiglare circuit that eliminates potential interference from sunlight, ensuring reliable performance even in bright conditions. The 8-degree angle of reception allows for precise detection, and the durable ABS body is designed to withstand all weather conditions, providing long-lasting reliability. Easy Installation and Integration The slim design of the EPSB photocells makes them easy to install in various locations, ensuring unobtrusive placement while maintaining optimal functionality. Their compatibility with Nice BlueBUS connections simplifies the integration process, allowing for quick and efficient setup. Specifications Range: Up to 15 meters Compatibility: Nice BlueBUS connections Antiglare Circuit: Eliminates sunlight interference Angle of Reception: 8 degrees Material: ABS body Design: Slim Applications The Slim Outdoor Photocells EPSB are ideal for use in residential, commercial, and industrial automated gate and garage door systems. Their advanced features and durable design make them a valuable addition to any automated setup, enhancing safety and security.

NICE Pair of Slim Outdoor Photocells EPS | Estimated 15m Range | Burglar-Resistant

Product Overview The Pair of Slim Outdoor Photocells EPS from NICE are essential safety devices designed for use with automated garage doors and gates. Featuring an estimated range of 15 meters and a burglar-resistant version, these synchronized photocells provide reliable obstacle detection and enhanced security. The package includes a receiver module, transmitter module, assembly screws, and instructions for easy installation. Key Features Estimated range of 15 meters Slim design for easy installation Synchronized for enhanced reliability Burglar-resistant version available Essential for safety in automated garage doors and gates Includes receiver and transmitter modules Simple installation with included screws and instructions Relay contact signal when photocell beam is engaged Product Description The Slim Outdoor Photocells EPS from NICE are designed to enhance the safety and security of your automated garage door or gate system. These synchronized photocells, available in a burglar-resistant version, detect obstacles by sensing the interruption of a light beam between the transmitter and receiver modules. Enhanced Safety and Security The EPS photocells are an essential safety component for any automated garage door or gate. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring that the door or gate stops or reverses to avoid collisions. Reliable Performance With an estimated range of 15 meters, the EPS photocells provide reliable performance under normal conditions. The synchronized design ensures accurate detection, and the burglar-resistant version adds an extra layer of security, making it more difficult for intruders to bypass the system. Easy Installation The slim design of the EPS photocells allows for easy and unobtrusive installation. The package includes all necessary components, such as the receiver and transmitter modules, assembly screws, and detailed instructions, making the installation process straightforward and hassle-free. Specifications Range: Estimated 15 meters Design: Slim Usage: Outdoor Type: Synchronized, burglar-resistant Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Slim Outdoor Photocells EPS are ideal for use in residential, commercial, and industrial automated garage door and gate systems. Their reliable performance and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

MICROTRONICS BlueForce Smart | Force Measurement Device for Automatic Gates and Doors

Product Overview The BlueForce Smart is an extraordinary force measurement device designed for CE certification of power-operated gates and doors. Compliant with standards EN12453 (former EN12445), EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms, this device represents an evolution of the acclaimed BlueForce and SpeedForce models. With revised design, packaging, and technology, the BlueForce Smart integrates the latest wireless functions, enabling interfacing with PCs and smartphones, leveraging advanced graphic potential and Internet connectivity. Key Features Compliant with EN12453, EN16005, EN60335-2-95, ASR A1.7, and DHF UK Norms Wireless functionality with Bluetooth/NFC Smart functions + App Interfaces with PC, tablet, or smartphone via USB or Bluetooth Integrated magnetic encoder with bus "2easy" (nonpolarized two-wire connection) Integrated positive stops, no need to install mechanical stops on the ground Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices 2-Year Warranty Product Description The BlueForce Smart is the latest force measurement device designed for the CE certification of automatic gates, barriers, and doors. It ensures compliance with EN12453 and DHF standards regarding force and stopping. This device allows you to take measurements at the gate, barrier, or door and access the data on a PC, tablet, or smartphone via USB or Bluetooth. Advanced Technology The BlueForce Smart is an evolution of the BlueForce and SpeedForce testers, featuring advanced wireless functions for seamless interfacing with modern devices. It includes powerful software that is user-friendly and compatible with Microsoft Windows, enabling easy data analysis and report generation. Comprehensive Kit The kit includes the BlueForce Smart instrument, Bluetooth/NFC Smart functions + App, a carry case with a pre-formed interior, a straight extension, a USB cable for PC connection, a hex wrench for handle disassembly, and downloadable instructions, software, and certificate of calibration from the download section. Software Features Guide to taking force tests, with application of the integrated legislation Downloading tests from the gauge memory and the Pocket PC, including via Bluetooth Viewing the impact curve and calculating parameters and averages Advanced graphics functions (zoom, limit mask, grid) Automatic evaluation of the measurement result Graphic representation of the measuring points for all types of doors/gates Customer and door/gate database management, with export/import functions Automatic test report generation for inclusion in the technical file Print option for reports and graphs in PDF Periodic software updates available online Technical Specifications Dimensions and Weight: 280x80x50mm - approx. 1.6 Kg Power supply: 9V alkaline battery Memory capacity: 80 tests Force acquisition interval: 6 sec, sampling at 1kHz Force measurement range: 0-2000N (mechanical stop at approx. 2100N) Force measurement resolution: 1N Dynamic time measurement resolution: 0.01s Maximum force measurement error margin: Range from 0 to 400N: +/-1% F.S Range from 400 to 1000N: +/-2% F.S Range from 1000 to 2000N: +/-4% F.S NFC interface: standard ISO/IEC 14443 and NFC Forum Type 4 (enabled as an option via password) BLE interface: Bluetooth version 4.1 (enabled as an option via password) USB interface: v.2.0 specification compliant CE-EMC conformity at TUV Rheinland on sample BlueForce instrument serial no.: 00981 Compliant with standards EN12445, EN12453, EN16005, EN60335-2-95 2-Year Warranty The BlueForce Smart comes with a 2-year warranty, ensuring reliability and peace of mind.

ROLLING CENTRE Magnum2 Kit 1 for Cantilever Gates | Up to 18m Opening & 2200kg Weight

Product Overview The Magnum2 Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 18 meters and supporting gates up to 2200kg in weight. Cantilever gate systems are the ideal applications for commercial, public sector, and industrial gates where there is intensive use due to the robustness of the cantilever mechanism, providing a high level of security. These systems offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 18 meters Handles gates up to 2200kg in weight No track required No ground work needed Low maintenance Suitable for intensive use High level of security Product Description The Magnum2 Kit 1 for cantilever gates is an efficient and reliable solution for supporting gates with a clear opening up to 18 meters and weighing up to 2200kg. This cantilever kit is ideal for various environments including commercial, public sector, and industrial settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a high level of security suitable for intensive use. Included in the Kit The kit includes the following components: 2 x 6m GIPI 4RM2C6 Magnum2 Hot Galvanised Track 2 x CA4RMS2 8-wheeled Magnum2 Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum2 Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Hot Galvanised Track: 2 x 6m GIPI 4RM2C6 made from structural grade steel Magnum2 Cantilever Carriages: CA4RMS2, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum2 Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum2 Carriage Drawing and Table Magnum2 Meeting Point Drawing and Table Magnum2 Support Wheel Drawing and Table Magnum2 Track Drawing and Table

ROLLING CENTRE Magnum Kit 1 for Cantilever Gates | Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 16 meters and supporting gates up to 1200kg in weight. Cantilever gate systems are often chosen for industrial or commercial installations due to their robust mechanism which provides a high degree of security. These systems work equally well on residential gates and offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 16 meters Handles gates up to 1200kg in weight No track required No ground work needed Limited maintenance Ideal for intensive use Aesthetically pleasing design Product Description The Magnum Kit 1 for cantilever gates is a robust and reliable solution for supporting gates with a clear opening up to 16 meters and weighing up to 1200kg. This cantilever kit is ideal for various environments including industrial, commercial, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a sleek and aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 2 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x CA4RMS 8-wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 2 x 6m GIPI 6RMZ6 made from structural grade steel Magnum Cantilever Carriages: CA4RMS, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum Carriage Drawing and Table Magnum Meeting Point Drawing and Table Magnum Support Wheel Drawing and Table Magnum Track Drawing and Table MAGNUMKIT Dimensions MAGNUMKIT GIPI6 RMZ6 Dimensions

BFT Battery back-up for the Stoppy B and MBB range of bollards

BFT Battery back-up for the Stoppy B and MBB range of bollards Battery Back up for STOPPY B bollard range (click or see bellow) Battery Back up for STOPPY MBB bollard range (click or see bellow)

TOUSEK AUTOMATION ST 51 Control Board | Large LCD Display | For 230V Swing Gates

Product Overview The ST 51 Control Board is designed for 230V swing gates, offering advanced features and easy operation. It includes a large illuminated LCD display and a clear text menu programmable through four buttons, providing a user-friendly interface for efficient gate control. Product Description The ST 51 Control Board is an advanced control unit suitable for 230V swing gates. It features a large illuminated LCD display that offers clear text menus, making programming straightforward and intuitive through its four-button interface. The control board includes a connection slot for a receiver, ensuring compatibility with various remote systems. It also supports self-monitoring of the photocell, adjustable partial opening, and a soft stop feature to ensure smooth gate operation. The pedestrian feature allows for partial opening, enhancing convenience and functionality. Key Features Large Illuminated LCD Display: Provides clear text menus for easy programming. Four-Button Interface: Simple navigation and configuration through intuitive controls. Receiver Connection Slot: Ensures compatibility with remote systems. Self-Monitoring Photocell: Enhances safety and reliability. Adjustable Partial Opening: Allows for customized gate opening settings. Soft Stop Feature: Ensures smooth and gentle gate movement. Pedestrian Feature: Enables partial opening for pedestrian access. Suitable for 230V Swing Gates: Designed specifically for 230V gate systems. What's in the Box 1 x ST 51 Control Board 1 x User Manual Necessary mounting hardware Specifications Display: Large illuminated LCD Interface: Four-button programmable menu Power Supply: 230V Receiver Connection Slot: Yes Photocell Monitoring: Self-monitoring Partial Opening: Adjustable Soft Stop: Yes Pedestrian Feature: Yes

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops

FAAC 455D Control Board | Swing Gate Control Board for 230V Motors

Product Overview The FAAC 455D is a versatile control board designed for swing gate operators with 230V motors. It offers reliable performance for both single leaf and bi-parting gates, making it suitable for various residential and commercial applications. With features like automatic opening and closing, slow down, and soft stop, the 455D provides a smooth and convenient gate operation experience. Key Features Swing gate control board for 230V motors Operates single leaf or bi-parting gates Automatic signal to open, gate closes after selected timed pause Provides opening and closing "slow down, soft stop" convenience Compatible with FAAC models: 412, 415, 400, 402, 422, 750, 760, 615 2-year guarantee for peace of mind Technical Specifications Power Supply: 115V Protection Fuses: 800mA (accessories), 5A (motors) Absorbed Power: 10W Motor Max Load: 800W Accessories Max Load: 0.5A Electric Lock Max Load: 15VA Operating Temperature: -78°F to +131°F Product Description The FAAC 455D Control Board is engineered to provide robust and reliable control for swing gates equipped with 230V motors. It supports both single leaf and bi-parting gate configurations, making it a flexible choice for various gate automation needs. The control board includes automatic signal functionality to open the gate and close it automatically after a pre-selected pause, enhancing convenience and security. The 455D control board also features "slow down, soft stop" capabilities, ensuring a smooth and gentle gate operation. This feature is particularly useful for preventing wear and tear on the gate and the motor, extending the lifespan of the entire system. Designed to be compatible with multiple FAAC gate operator models, including the 412, 415, 400, 402, 422, 750, 760, and 615, the FAAC 455D offers a versatile solution for upgrading or replacing existing control boards. With a maximum motor load of 800W and an accessories load of 0.5A, it is built to handle demanding applications efficiently. The control board operates reliably across a wide temperature range, from -78°F to +131°F, ensuring consistent performance in various environmental conditions. What's in the Box: 1 x FAAC 455D Control Board Installation manual and hardware FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

CAME Transmission lever A4472

Came A4472 Transmission lever with adjustable gate-leaf opening stop. for use with the FROG underground automation system