NICE MYGO4 Transmitter MyGO | 4 channels, 433.92 MHz

Product Overview The MYGO transmitter has a secret code, the so-called “ENABLING CODE”. By transferring the programmed code from a memorised transmitter to a new transmitter, the new transmitter is recognised (and memorised) automatically by the receiver. MYGO transmitters operate by default with the Unidirectional “O-Code” radio encoding system. To satisfy backward-compatibility requirements, MYGO transmitters can operate with the ET Blue, Piccinin and Linear encoding systems. Low battery warning via red flashes of the info LED during transmission. Available in bi-directional version as well: 2, 4 and 8 buttons depending on customer needs. By programming in Mode 1 according to the manual, this allows you to memorise all the transmitter keys, at once, in the receiver. The 1 to 4 keys are automatically associated to each control managed by the Control Unit according to a factory-set sequence By programming each button individually more options are available for controlling the gate: SBS (Step by Step) function - Press button 1 once to open the gate, press button 1 again to stop the gate, Press button 1 again to close the gate Partial - Press button 2 which partially opens the gate for a pedestrian rather than fully opening the gate Open & Block function - Press button 3 to open and latch the gate in an open position so it will not automatically close, ideal for opening during business hours, allow visitors at certain times and free access. Unlock function - Press button 4 to unlatch the gate and close   Specifications Product type Unidirectional transmitter Power supply 3 Vdc lithium battery type CR2430 Battery life approx. 3 years, with 10 command transmissions per day Frequency 433.92 MHz Radiated power (ERP) < 10 mW Radio encoding O-Code ET Blue, Peccinin and Linear Operating temperature -5°C ... +55 °C Protection rating IP 30 (suitable for use at home indoors or in outdoor areas under cover) Dimensions 72 x 34 x 110h mm Weight 20 g

NICE BiDi-Shutter | Interior Bidirectional Interface for Tubular Motors

 Product Overview The BiDi-Shutter is an advanced bidirectional interface designed for integrating mechanical tubular motors of interior shutters and outdoor awnings into your smart home system. This interface allows for individual, group, or scenario control of connected motors, providing real-time feedback on automation status and efficient energy management to reduce waste. The BiDi-Shutter enhances comfort by protecting indoor environments from excessive sunlight and reducing the need for air conditioning. Key Features Control connected motors individually, in groups, or in scenarios Receive real-time feedback on automation status Manage electrical loads and reduce energy waste Voice control via Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment using Yubii or MyNice apps Enhance indoor comfort by protecting against heat and reducing air conditioning use Fast programming of limit switches and continuous automatic calibration Set two intermediate opening positions based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors No gateway required for controlling Venetian blinds, rolling shutters, and awnings Each bidirectional product acts as a radio signal repeater to extend signal coverage Product Description Smart Home Integration BiDi-Shutter allows seamless integration of tubular motors into your smart home system, enabling comprehensive control and management. You can control the connected motors using voice commands through Amazon Alexa, Google Home, or Siri Shortcuts. Additionally, the Yubii and MyNice apps provide remote management capabilities via your smartphone, smartwatch, or car infotainment system. Energy Efficiency and Comfort By managing electrical loads and controlling consumption, BiDi-Shutter helps reduce energy waste. It also protects your indoor environment from excessive heat, making the climate more comfortable and minimizing the need for air conditioning. This contributes to energy savings and enhances overall comfort. Easy Programming and Compatibility Programming the limit switches is fast and straightforward, requiring just two complete maneuvers. The system ensures continuous automatic calibration during operation. You can set two intermediate opening positions based on sun sensor settings, allowing for optimal sunlight control. BiDi-Shutter is compatible with both unidirectional and bidirectional remote controls and climate sensors, offering flexibility in control options. Reliable and Efficient Each bidirectional product in the BiDi-Shutter system acts as a radio signal repeater, extending signal coverage and ensuring reliable operation. This makes the system efficient and effective in controlling various types of window coverings, including Venetian blinds, rolling shutters, and awnings, without the need for a separate gateway. Usage Instructions Install the BiDi-Shutter interface according to the provided manual. Pair the interface with your smart home system and configure the settings using the Yubii or MyNice apps. Set the desired opening positions and control the tubular motors using voice commands or remote controls. Regularly check the system for updates and ensure all components are functioning correctly. Dimensions Compact and designed for easy installation, the BiDi-Shutter interface fits seamlessly into your existing smart home setup. Safety and Maintenance Ensure the BiDi-Shutter interface is installed in a suitable location, protected from moisture and excessive heat. Regularly check for firmware updates to maintain optimal performance. Keep the interface and connected devices clean and free from obstructions.

DEA LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection

Product Overview The LOOP230 loop detector is a magnetic device designed to detect the presence of metal masses, such as vehicles, in a specific passage. When a metal mass is detected, the detector sends a command to the control unit, enabling automated systems like barriers to operate efficiently. Available in both 1-channel and 2-channel versions, the LOOP230 offers flexible solutions for various applications. Key Features Magnetic loop detector for vehicle detection. Available in 1-channel (LOOP230/1) and 2-channel (LOOP230/2) versions. Detects metal masses like cars and motorcycles. Sends commands to control units for automated operation. 2-channel version allows connection of two loops for enhanced control. Ideal for controlling entry and exit barriers or providing multiple commands to the same automation. Product Description LOOP230 Loop Detector | 1 or 2 Channels for Vehicle Detection The LOOP230 loop detector is an essential component for automated systems that require vehicle detection. By connecting a magnetic loop, the device can detect the presence of metal masses and send appropriate commands to the control unit, ensuring smooth and efficient operation of barriers and other automated controls. Product Variants ProductDescription LOOP230/1 Loop detector, 1 channel. LOOP230/2 Loop detector, 2 channels. The 2-channel version of the LOOP230 allows the connection of two loops, providing the ability to control two separate but close automations (such as two opposite barriers for vehicle entry and exit) or to issue two commands to the same automation (such as opening before a vehicle passes and closing after it). This flexibility makes the LOOP230 an ideal solution for various automated systems that require precise and reliable vehicle detection and control.

BENINCA RISE MAX.CP Control Panel for 2 Hydraulic Bollards | 230 Vac Power Supply

Product Overview The RISE MAX.CP Control Panel is designed for controlling 1 or 2 hydraulic bollards, providing a robust and efficient solution for managing bollard operations. Powered by a 230 Vac 50/60 Hz supply, this control panel integrates advanced features to ensure reliable performance and ease of use. The control panel includes an integrated 433.92 MHz receiver supporting three encoding systems: Advanced Rolling Code, Rolling Code, and Fixed Code. Key Features Control panel for 1 or 2 hydraulic bollards 230 Vac 50/60 Hz power supply Integrated 433.92 MHz 64-code receiver with Advanced Rolling Code, Rolling Code, and Fixed Code Removable terminal boards for easy installation Parameter and operation logic regulations through integrated LCD display Automatic, semi-automatic, and deadman’s logic Programming access password for security Step-by-step command inputs separate for each bollard Centralised command inputs ALL UP and ALL DOWN for simultaneous raising and lowering of both bollards Separate limit switch inputs for each motor Control inputs for loop detectors and protection devices (GL.PRES) 2 outputs configurable as bollard status indicator or command of the optional board CP.BL Compatible with optional board CP.BL to manage signal lights and warning buzzer GL.BUZZ IP54 protection level for durable performance in various environments Product Description The RISE MAX.CP Control Panel offers a comprehensive solution for managing hydraulic bollards. It is designed to handle up to two bollards with separate and centralized command inputs, allowing for flexible and efficient control. The integrated 433.92 MHz receiver supports multiple encoding systems, ensuring secure and reliable communication. The control panel features removable terminal boards, making installation straightforward and convenient. The integrated LCD display allows for easy parameter and operation logic adjustments, while the programming access password ensures secure configuration. The MAX.CP Control Panel supports automatic, semi-automatic, and deadman’s logic, providing versatility in operation. Separate limit switch inputs for each motor and control inputs for loop detectors and protection devices enhance safety and functionality. The panel also includes two configurable outputs for bollard status indicators or commands for the optional board CP.BL. Designed with IP54 protection, the MAX.CP Control Panel is built to withstand various environmental conditions, ensuring long-lasting and reliable performance. It is an ideal solution for managing the operation of hydraulic bollards in commercial, industrial, and residential settings. Specifications Power Supply 230 Vac 50/60 Hz Integrated Receiver 433.92 MHz 64-code with Advanced Rolling Code, Rolling Code, Fixed Code Terminal Boards Removable Display Integrated LCD Operation Logic Automatic, semi-automatic, deadman’s logic Programming Access Password protected Command Inputs Separate for each bollard, centralized ALL UP and ALL DOWN Limit Switch Inputs Separate for each motor Control Inputs For loop detectors and protection devices (GL.PRES) Configurable Outputs 2 (bollard status indicator or command of optional board CP.BL) Optional Board CP.BL (for managing signal lights and warning buzzer GL.BUZZ) Protection Level IP54 Applications The RISE MAX.CP Control Panel is ideal for managing hydraulic bollards in a variety of settings, including commercial, industrial, and residential areas. Its advanced features and robust design ensure reliable and efficient bollard operation, enhancing security and access control.

V2 Gate Automation V2 Flexy2 230Vac | Analog Control Unit for Swing & Sliding Gates | Built-in Receiver & Advanced Safety

Product Overview The V2 Flexy2 230Vac is an analog control unit designed for managing both swing gates (single and double leaf) and sliding gates. This unit features adjustment and programming via trimmer and dip-switch, making it a reliable and straightforward solution for gate automation. It supports a 230V power supply for two single-phase motors and includes a built-in receiver, adding convenience and efficiency to its operation. Key Features Analog control unit for swing and sliding gates 230V power supply for 2 single-phase motors Adjustment and programming by trimmer and dip-switch Built-in receiver (433.92 MHz) Stores up to 240 Personal Pass transmitters RJ45 connector for PROG2 programmer connection Start, pedestrian start, and stop controls from the transmitter Open/close limit switch inputs 230V flashing light output with intermittency Courtesy light output controllable by transmitter Safety device test before any opening Leaf slow-down function in limit switch area Monitoring of input status shown by LEDs Product Description The V2 Flexy2 230Vac analog control unit is a robust solution for the automation of swing and sliding gates. This unit is powered by a 230V supply and can control two single-phase motors, making it suitable for various gate configurations. Its adjustment and programming are easily managed through trimmer and dip-switch settings, offering simplicity and reliability. The built-in receiver operating at 433.92 MHz enhances convenience, allowing for seamless integration with up to 240 Personal Pass transmitters. This feature ensures that multiple users can operate the gate efficiently. The RJ45 connector facilitates connection to the PROG2 programmer via a standard network cable (UTP), providing additional programming capabilities. Control options include start, pedestrian start, and stop commands from the transmitter, offering flexibility in gate operation. The unit supports open/close limit switch inputs, ensuring precise control of gate movements. A 230V flashing light output, designed for use with intermittent flashing lights, provides clear visual indicators during gate operation. For enhanced safety, the Flexy2 performs a safety device test before any gate movement, ensuring all components are functioning correctly. The leaf slow-down function in the limit switch area reduces noise and mechanical stress, ensuring smooth and quiet gate closures. The courtesy light output can be controlled by the transmitter, adding convenience and enhancing security. Monitoring of input status is facilitated by LEDs, providing clear and immediate feedback on the system's operational state. Overall, the V2 Flexy2 230Vac analog control unit combines straightforward programming, robust performance, and advanced safety features, making it an excellent choice for modern gate automation systems.

START Control Board Range for DEA 230V Operators (212E, 212E/C, 211ER/C)

Product Overview The START Control Board range is designed specifically for DEA 230V operators, providing reliable and efficient control for a variety of automation applications. Available in three configurations—212E, 212E/C, and 211ER/C—these control boards offer advanced features such as automatic operating time learning, electronic force adjustment, and integrated radio receivers to enhance the functionality and safety of your automation systems. Key Features 212E: Circuit only. 212E/C:Control board with 100G box for 1 or 2 230V AC operators. Features include: Built-in 433 MHz radio receiver Automatic operating time learning Electronic force adjustment Controlled input for external safety device 211ER/C:Control panel with 100A box for the automation of 230V AC operators for roller shutters. Features include: Selectable operating logic (step by step, separated open/close, dead man command) Programmable working times Built-in 433 MHz radio receiver Specifications Model: START (212E, 212E/C, 211ER/C) Power Supply: 230V AC Control: For 1 or 2 operators (212E/C) or roller shutters (211ER/C) Radio Receiver: Integrated 433 MHz Learning Features: Automatic operating time learning (212E/C) Force Adjustment: Electronic (212E/C) Safety: Controlled input for external safety device (212E/C) Versions 212E: Circuit only 212E/C: Control board with 100G box 211ER/C: Control panel with 100A box for roller shutters What's in the Box 1 x START Control Board (model varies) 1 x Mounting Box (for models with /C) Installation Instructions For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

NICE Bi-Di-Awning | Exterior Bidirectional Interface for Tubular Motor

Product Overview The Bi-Di-Awning is an exterior bidirectional interface designed for tubular motors of outdoor awnings. It enables seamless integration of mechanical tubular motors into smart home systems, offering individual, group, or scenario control. The interface provides feedback on automation status, helps manage electrical loads, and reduces energy waste. The Bi-Di-Awning is compatible with voice commands via Amazon Alexa, Google Home, and Siri Shortcuts, and can be managed remotely through the Yubii or MyNice apps. Key Features Exterior bidirectional interface for tubular motors Control connected motors individually, in groups, or in scenarios Receive feedback on automation status Manage electrical loads to reduce energy waste Compatible with Amazon Alexa, Google Home, and Siri Shortcuts Remote management via smartphone, smartwatch, or car infotainment Protect indoor environments from the heat of the sun Fast programming of limit switches from the transmitter Set two intermediate opening positions Program partial opening based on sun sensor settings Compatible with unidirectional and bidirectional remote controls and climate sensors Control Venetian blinds, rolling shutters, and awnings without a gateway Acts as a radio signal repeater to extend coverage Product Description Bi-Di-Awning Exterior Bidirectional Interface for Tubular Motors The Bi-Di-Awning interface integrates mechanical tubular motors of outdoor awnings into your smart home system, allowing for comprehensive control and management. Whether you need to control the motors individually, in groups, or as part of a scenario, the Bi-Di-Awning provides the flexibility and functionality you need. Smart Home Compatibility Enjoy the convenience of controlling your awnings through voice commands with Amazon Alexa, Google Home, and Siri Shortcuts. Manage your devices remotely using the Yubii or MyNice apps on your smartphone, smartwatch, or car infotainment system. Efficient Energy Management The Bi-Di-Awning helps reduce energy waste by controlling consumption and managing electrical loads effectively. Protect your indoor environment from the heat of the sun, making your climate more comfortable and cutting back on air conditioning use. Advanced Programming and Compatibility The interface allows for fast programming of limit switches directly from the transmitter by performing two complete manoeuvres, ensuring continuous automatic calibration. You can set two intermediate opening positions and program partial openings based on sun sensor settings. The Bi-Di-Awning is compatible with both unidirectional and bidirectional remote controls and climate sensors, making it a versatile solution for controlling Venetian blinds, rolling shutters, and awnings without the need for a gateway. Enhanced Signal Coverage Each bidirectional product acts as a radio signal repeater, extending the signal coverage and ensuring reliable communication across your system.

Module to Control Automation Systems and Sun Sensor Activation Command Niceway WM080G

Niceway module to control 80 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.

NICE Module to Control Automation Systems and Sun Sensor Activation WM004G

Niceway module to control 4 open-stop-close automation systems either individually or in multi-group mode and sun sensor activation command.  

NICE Radio Digital Selector EDSWG | Wireless | Compatible with FLOR Series Receivers

Product Overview The Nice EDSWG radio digital selector is a compact and convenient access control device designed for compatibility with the receivers of the FLOR series. Featuring 13 keys and a backlit keypad, this wireless selector operates on a secure 433.92 MHz frequency with FLOR 52 bit self-learning rolling code for enhanced security. The EDSWG is surface-mounted with a depth of 27mm and is housed in a vandal-proof and weather-proof IP54 metal casing, ensuring durability and reliability in various conditions. Key Features 13-key surface-mounted backlit keypad Compact design with 27mm depth and 70mm length/width Acoustic feedback when buttons are pressed 100% wireless, no cables or wiring required Vandal-proof and weather-proof IP54 metal casing Operates in temperatures from -10°C to +55°C Three transmission channels for controlling separate systems or commands 433.92 MHz frequency FLOR 52 bit self-learning rolling code with up to 4.5 trillion combinations Opera radio coding Range of 25 meters in open space and 15 meters inside a building Energy-efficient design with ambient light sensor Automated turn-off when not in use, reactivates when a button is pressed Approximately 2 years of battery life (based on 10 transmissions a day) Operates using 2 x 3v CR2430 “coin style” batteries Product Description The Nice EDSWG radio digital selector is an essential component for secure and convenient access control. Designed for compatibility with FLOR series receivers, this 13-key selector offers wireless operation with no cables or wiring required. The backlit keypad and compact design (27mm depth and 70mm length/width) ensure ease of use and installation. The EDSWG provides acoustic feedback when buttons are pressed, enhancing user experience. Secure and Reliable The EDSWG operates on a 433.92 MHz frequency using FLOR 52 bit self-learning rolling code, offering up to 4.5 trillion combinations for enhanced security. The device supports three transmission channels, allowing for control of separate systems or different commands within a single automated system. The Opera radio coding ensures secure and reliable communication. Durable and Weather-Proof Encased in a vandal-proof and weather-proof IP54 metal casing, the EDSWG is designed to withstand harsh environmental conditions, ensuring long-lasting durability. The selector operates effectively in temperatures ranging from -10°C to +55°C, making it suitable for various installation environments. Energy Efficient The EDSWG features an ambient light sensor that activates keypad lighting only when necessary, significantly reducing energy consumption. The device also includes an automated turn-off function when not in use, reactivating whenever a button is pressed. With an estimated battery life of approximately 2 years (based on 10 transmissions per day), the EDSWG is highly energy-efficient. Specifications Keys: 13 Connection: Wireless to FLOR series receivers Mounting: Surface-mounted, 27mm depth Frequency: 433.92 MHz Coding: FLOR 52 bit self-learning rolling code Range: 25 meters in open space, 15 meters inside a building Protection Rating: IP54 Operating Temperature: -10°C to +55°C Battery Life: Approximately 2 years Power Supply: 2 x 3v CR2430 “coin style” batteries Package Contents Radio Digital Selector EDSWG Mounting hardware Instructions Applications The Nice EDSWG radio digital selector is ideal for use in residential, commercial, and industrial access control systems. Its advanced features, secure operation, and ease of use make it a valuable addition to any automated setup, ensuring convenient and reliable access management.

NICE Portable Unit O-View | Programming and Diagnostics for BUS T4 Devices

Product Overview The Portable Unit O-View is a versatile device designed for control, programming, and diagnostics of devices equipped with a BUS T4 connection. It can be used on-site or remotely via GPRS when connected to your PDA, Smartphone, or PC. The O-View provides a straightforward and intuitive interface for accessing and adjusting all control unit parameters, making it an essential tool for installation, maintenance, and centralized management of automation systems. Key Features Compatible with devices equipped with a BUS T4 connection Direct connection via BUS T4 cable (supplied) Multi-function display for easy access to control unit parameters Intuitive programming mode with simple menus Remote management via GPRS with PDA, Smartphone, or PC Creates a network for local or remote centralized management Automatic device recognition and relevant parameter display Built-in clock with integrated backup battery for scheduled commands Practical wall-mounted support included Two-level protection with user and installer passwords Product Description The O-View Portable Unit is designed to facilitate the control, programming, and diagnostics of devices equipped with a BUS T4 connection. This multi-functional display unit connects directly to the compatible control unit using the supplied BUS T4 cable, granting access to all control unit parameters. This capability allows you to adapt the system to meet various needs through a single, simple programming mode with intuitive menus, eliminating the need to consult specific instructions. Advanced Control and Management By connecting the O-View permanently to a control unit or a group of control units via BUS T4, you can create a network for local or remote centralized management. The O-View powers up and automatically recognizes all devices on the network, displaying only the specific parameters needed for each device, thus eliminating any irrelevant or redundant information. Scheduling and Automation The built-in clock, equipped with an integrated backup battery, allows for the programming of command delivery at set times. This feature is perfect for automating the opening and closing of complex industrial and commercial systems or for creating “scenarios”. The practical wall-mounted support (supplied) adds convenience, allowing you to place the O-View in an optimal location for easy access and operation. Enhanced Security The O-View offers two levels of protection via user and installer passwords, ensuring differentiated access to more reserved functions and increased safety. This security measure guarantees that only authorized personnel can access sensitive settings and perform critical adjustments. Specifications Connection type: BUS T4 Compatibility: PDA, Smartphone, PC for remote management Display: Multi-function, intuitive interface Clock: Built-in with integrated backup battery Security: User and installer password protection Support: Wall-mounted support included Use Cases The O-View can be used temporarily for programming and maintenance or installed permanently on-site to take full advantage of local or remote centralized management. Its portability and comprehensive functionality make it a valuable tool for installers and maintenance personnel in industrial and commercial environments.

FAAC XKP 868 Wireless Radio Keypad | Backlit LEDs, 5-Digit Access Code, IP54 Protection

Product Overview The XKP 868 Wireless Radio Keypad is designed for secure and convenient access control. Featuring backlit LED keys and audible keypress feedback, this keypad ensures easy use even in low-light conditions. It supports up to 3 commands protected by a 5-digit access code and offers 1 direct command. The IP54 protection class guarantees durability in various environmental conditions. Please note, it requires the FAAC 868SLH radio receiver and decoder for operation. Product Description The XKP 868 Wireless Radio Keypad provides a robust and user-friendly solution for access control. Its backlit keypad LEDs ensure visibility, while the keys emit a beep when pressed for additional feedback. This wireless keypad can handle up to 3 secure commands with a 5-digit PIN, alongside 1 direct command for quick access. Its IP54 protection class makes it suitable for outdoor use, providing resistance against dust and water. Key Features Wireless radio keypad Backlit keypad LEDs for enhanced visibility Audible keypress feedback Supports 3 commands with 5-digit access codes (PIN) 1 direct command IP54 protection class for outdoor durability Requires FAAC 868SLH radio receiver and decoder What's in the Box 1 x XKP 868 Wireless Radio Keypad 1 x User Manual Mounting hardware Specifications Keypad Type: Wireless radio LEDs: Backlit Commands: 3 protected by 5-digit access code, 1 direct command Protection Class: IP54 Compatibility: Requires FAAC 868SLH radio receiver and decoder

BFT PERSEO CBE Control Panel | 230v | For Electromechanical and Hydraulic Bollards

Product Overview The BFT PERSEO CBE is a 230v control panel designed for managing electromechanical and hydraulic bollards. This advanced control board can handle up to 4 bollards simultaneously (or two XPASS B 330/1200 bollards) and is compatible with BFT's U-Link system. It features a built-in receiver and an incorporated heating circuit for reliable operation in temperatures as low as -40°C. Key Features Operates 1 - 4 automatic bollards in parallel or two XPASS B 330/1200 bollards Power supply: 230V single phase Output power: 230Vac single-phase, 12A max Removable terminal blocks for easy installation Digital programming with 3-digit display Proxima programmer connector Dual-channel receiver with 2048 codes included Heater for operation down to -40°C Complete support for anti-terrorism bollards 11 inputs and 9 outputs for versatile connectivity U-Link compatibility for seamless integration with smart systems Automatic reclosing feature Separate open and close commands Pre-flashing function for enhanced safety Deadman control for manual operation Automatic or semi-automatic operation modes Opening and closing limit switch management arranged for UPS Specifications SpecificationDetails Power Supply 230V single phase Output Power 230Vac single-phase, 12A max Operating Temperature Down to -40°C with built-in heater Control Capacity 1 - 4 bollards (in parallel) or 2 XPASS B 330/1200 bollards Inputs/Outputs 11 inputs, 9 outputs Receiver Dual-channel receiver with 2048 codes Programming Digital programming with 3-digit display Proxima Programmer Connector Included U-Link Compatibility Yes Operation Modes Automatic or semi-automatic Safety Features Pre-flashing, deadman control, separate open and close Product Description The BFT PERSEO CBE 230v Control Panel is a state-of-the-art control board designed to manage up to 4 electromechanical or hydraulic bollards simultaneously. Ideal for both residential and commercial settings, this control panel ensures reliable and efficient operation with its advanced features and robust design. The PERSEO CBE is equipped with a built-in receiver capable of handling 2048 codes and an integrated heating circuit, enabling it to function optimally even in extreme temperatures down to -40°C. Its U-Link compatibility allows seamless integration with modern smart home systems, enhancing convenience and control. The control panel includes various features to ensure safe and efficient operation, such as automatic reclosing, pre-flashing, and deadman control. Additionally, it supports complete anti-terrorism bollard systems with 11 inputs and 9 outputs, making it a versatile and reliable choice for high-security applications. Designed for ease of use and installation, the PERSEO CBE features removable terminal blocks and digital programming with a 3-digit display. Whether you need to control a single bollard or a complex multi-bollard system, the BFT PERSEO CBE provides the performance and reliability you need. Order before 2pm for next working day delivery, subject to stock availability.

BPT CAME-AF43SR | Plug-In Radio Card | 433.92MHz

Product Overview The BPT CAME-AF43SR is a plug-in radio card designed to enhance the functionality of your gate automation system. Operating at a frequency of 433.92MHz, this radio card provides reliable and secure communication for controlling your gate. The AF43SR is easy to install, making it a convenient addition to your gate automation setup. Key Features Plug-in radio card for gate automation systems Operates at 433.92MHz frequency Easy installation for seamless integration Provides secure and reliable communication Product Description The BPT CAME-AF43SR plug-in radio card is an essential accessory for enhancing the performance and control of your gate automation system. Designed to operate at a frequency of 433.92MHz, this radio card ensures reliable and secure communication between your gate's control panel and remote devices. Installation of the AF43SR is straightforward and hassle-free, thanks to its plug-in design. Simply insert the card into the appropriate slot in your gate's control panel to enable enhanced functionality and improved control. The secure communication provided by this radio card ensures that your gate operates smoothly and efficiently, responding accurately to remote commands. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. Technical Specifications Product Code: CAME-AF43SR Type: Plug-In Radio Card Frequency: 433.92MHz Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

CAME 4-channel card S0004N

CAME BPT S0004N 4 Channel control panel CAME 12-24V AC-DC Possibility of radio commanding the 1st channel Four-channel card for S5000 S6000 and S7000 keypads.

CAME Safety casing H3000

CAME H3000 Safety Release Mechanism. What comes in the box QuantityItem 1 CAME H3000 Safety Release Mechanism