FADINI F/2098L Gear box for MEC 200 vertical

FADINI F/2098L Gear box for MEC 200 vertical Gear box for MEC 200 vertical. Complete with base plate, clutch and limit switch.  

FADINI F/2097L Gear box for MEC 200 horizontal

FADINI F/2097L Gear box for MEC 200 horizontal Gear box for MEC 200 horizontal. Complete with base plate, clutch and limit switch.

FADINI F/206L Safety switch, factory-fitted to MEC 200

FADINI F/206L Safety switch, factory-fitted to MEC 200 Safety switch with support for 24 Vac low voltage cut-off.

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO

FADINI F/7231L LIMY 51 electronic card for NYOTA 115 EVO LIMY 51 electronic card allowing duplication of the magnetic limit switch single contact. Only for NYOTA 115 EVO.  

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder

FADINI F/2069L Polycarbonate box for ELPRO 12 EVO, complete with connector for the encoder Polycarbonate box 110 x 210 x 295 mm for ELPRO 12 EVO, complete with connector for the encoder.

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650

FADINI F/671L Mechanical limit switch for JUNIOR 624/633/650 Mechanical limit switch, complete with striking plates and screws. Used on JUNIOR 624, JUNIOR 633 and JUNIOR 650.  

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding

FADINI F/2039L Zinc gear rack m4 22x22x2.000 mm for welding Zinc gear rack m4 22 x 22 x 2.000 mm for welding.  

FADINI F/208L Gear rack fixing set

FADINI F/208L Gear rack fixing set Gear rack fixing set including bolt and washer  

FADINI F/207L Zinc gear rack m4 30x12x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x12x1000mm with fixing holes Zinc gear rack m4 30 x 12 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.  

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes

FADINI F/204L Zinc gear rack m4 30x8x1000mm with fixing holes Zinc gear rack m4 30 x 8 x 1.000 mm with fixing holes. For fixing use fixing set F/208L.

FADINI F/706L FADINI UTTO oil for gears, in 2 liter can

FADINI 706L FADINI UTTO oil for gears, in 2 liter can “FADINI UTTO oil” for gears, in 2 liter can

FADINI F/632L Pack of 2 x 2,6 Ah - 12 V batteries for JUNIOR 624

FADINI F/632L Pack of 2x2,6Ah-12V batteries for JUNIOR 624 Pack of 2 x 2,6 Ah - 12 V batteries complete with cables for connections to ELPRO 62 control unit  

FADINI F/2118L Nylon gear rack m4x1000mm - Pack of 10 pieces

FADINI F/2118L Nylon gear rack m4x1000mm Pack of 10 pieces Nylon gear rack m4x1.000 mm with fastening supports, metal core, complete with screws and square washers. Max 700 kg. Pack of 10 pcs.  

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards

FADINI F/2032L Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards Inductive detector for magnetic loops, to be used with automatic gates, barriers and bollards. Technical data: two magnetic loops with two relay outputs and one for alarm, 24 Vac/dc  

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc

FADINI F/9321L Voltage stabilizer 230Vac / out 24Vdc 24 Vdc voltage stabilizer. One voltage stabilizer for each operator fitted with solenoid valve.  

FADINI Zinc-coated plate to weld for HINDI 880 EVO

150x150mm zinc-coated plate for HINDI 880 EVO - 150 x 150 mm zinc-coated plate to weld, for the rear fixing bracket 120x120mm zinc-coated plate for HINDI 880 EVO - 120 x 120 mm zinc-coated plate to weld, for the front fixing bracket 84x84mm zinc-coated plate for HINDI 880 EVO - 84 x 84 mm zinc-coated plate for fixing  

FADINI BART 350 Specific Accessories (articulated arm, straight arm and mechanical gate stop)

Articulate Arm for BART350 - Zinc-coated steel articulated arm Straight Arm for BART350 - Zinc-coated steel straight arm with sliding guide Stop closed gate position for BART350 - Mechanical gate stop in closed gate position, with fixing screws  

FADINI Articulated arm for APROLI 280BATT

What is in the box? 283L Extendable articulated arm  

FADINI Shaped arm right (RH) or left hand (LH) for APROLI ROBUSTO

What is in the box? Right-handed or left-handed extendable articulated arm  

FADINI F-ring with square hole for Drive 700

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Foundation box with cover for DRIVE 700

What is in the box? Foundation box complete with aluminium cover, F-ring with square hole and zinc-coated steel anchoring plate  

FADINI Off-axis gate arm for COMBI 740 and DRIVE 700

Zinc-coated steel arm and guide for off-axis gate installations. Only for COMBI 740 175° and DRIVE 700 175°  

FADINI F-ring with square hole for Combi 740

What is in the box? F-ring with square hole to be welded under the gate  

FADINI Distance support for Combi 740

What is in the box? Zinc-coated steel, preparatory distance support with base plate and bronze washer. It is used inside the foundation box to allow manual opening and closing of the gate without any motor operator fitted to it

FADINI Thermal probe for MEC 700/80 and COS 982

What is in the box? Thermal probe - Thermal probe with 230 Vac - 50 Hz electric resistor, complete with power supply cable, for the oil-hydraulic motor-pump MEC 700/80 VENTIL and COS 982. Factoy-fitted.

FADINI HF.PLI oil - 2 liters

What is in the box? FADINI HF.PLI oil - 2 liters - Hydraulic “FADINI HF.PLI oil”, in 2 liter can  

FADINI Flow regulator with connecting joints

What is in the box? Flow regulator with connecting joints  

FADINI Flexible pipe x 0,6 m

What is in the box? Flexible pipe x 0,6 m

FADINI Copper tube ø 8 mm (length 50 / 4 m)

Copper tube ø 8 mm - 50 m (12,5 kg) Copper tube ø 8 mm - 4 m (1 kg)  

FADINI Pipe connecting block (4 way / 6 way)

4-way pipe connecting block 6-way pipe connecting block  

FADINI MEC 700/80 Ventil Casing (Single tank / Double tank)

Metal Single tank casing - Zinc-coated metal sheet protection casing for the single-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Dimensions (mm): 250x350xh460 Metal Double tank casing - Zinc-coated metal sheet protection enclosure for the double-tank oil-hydraulic motor pump MEC 700/80 VENTIL, complete with fastening support. Installations with two actuators on single-leaf gates (max 400 mm piston stroke) require that the double-tank oil-hydraulic motor-pump be used. The double-tank motor-pump unit is also required with 500 - 600 - 700 - 800 - 900 - 1.000 mm piston strokes. Dimensions (mm): 250x590xh460  

Fadini ELPRO 62 | Control Panel | 24V for JUNIOR 624 Gates

Product Overview The Fadini ELPRO 62 Control Panel is a 24V electronic programmer designed for the JUNIOR 624 gate operators. This control panel offers comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. The panel operates on a single phase power supply, ensuring reliable performance and ease of installation. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO 62 Control Panel enhances the functionality and safety of the JUNIOR 624 gate operators. This 24V electronic programmer supports precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 62, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 200 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 24 V DC/AC flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 200 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 24 V DC/AC Motor run time: - Dwell time: 1 - 120 S Pedestrian opening time: max 3 min Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 63 | Control Panel | Single Phase for JUNIOR 633 and 650

Product Overview The Fadini ELPRO 63 Control Panel is an advanced electronic programmer designed for the JUNIOR 633 and 650 gate operators. This control panel provides comprehensive functionality, including gate travel programming with self-detection, slow-down features, and automatic reversal upon impact. It is also preset to control a second gate (SLAVE) for synchronized operations. Key Features Gate travel programming with self-detection Slow-down feature for smooth operation Reverses direction upon impact for safety Preset for 2nd gate (SLAVE) control Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 63 Control Panel is designed to enhance the functionality and safety of the JUNIOR 633 and 650 gate operators. This single phase electronic programmer offers precise gate travel programming with self-detection capabilities, ensuring smooth and accurate gate movements. The slow-down feature allows for gentle deceleration, reducing wear and tear on the gate mechanism. Safety is a priority with the ELPRO 63, as it includes an automatic reversal function that activates upon detecting an impact, preventing potential damage or injury. The control panel is also preset to manage a second gate in a master-slave configuration, providing synchronized operation for dual gate systems. The control panel supports a single phase power supply of 230 V ±10% 50 Hz and can handle motors with a maximum power of 375 W. It includes various outputs for courtesy lights, photocells, keyswitches, and radio receivers, offering versatile connectivity options. The courtesy light output is rated at 24 V DC with a maximum of 50 mA, while the photocells/keyswitch/radio receiver output supports up to 24 V DC and 500 mA. Additional outputs include a 24 V - 1W pilot light output and a 230 V - 25W max flasher output. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 375 W Courtesy light output: max 24 V DC - 50 mA Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V - 1W DSA control output: 24 V DC/AC Flasher output: 230 V - 25W max Motor run time: - Dwell time: 1 - 220 S Pedestrian opening time: max 3 min Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO 980 | Control Panel | Single Phase for BAYT 980 Barriers

Product Overview The Fadini ELPRO 980 Control Panel is an advanced single phase electronic controller specifically designed for the BAYT 980 barriers. This control panel offers a range of functions to ensure smooth and efficient barrier operation, including step-by-step function, deadman (hold on switched) control, and both automatic and semiautomatic modes of operation. It is also preset to operate two synchronized barriers simultaneously (Master/Slave). Key Features Step-by-step function for precise control Deadman (hold on switched) control for safety Automatic and semiautomatic modes of operation Preset to operate two synchronized barriers simultaneously (Master/Slave) Connector for traffic light control card with 2/3 lights External time clock for preset opening and closing times Designed for BAYT 980 barriers Product Description The Fadini ELPRO 980 Control Panel is engineered to provide reliable and efficient control for BAYT 980 barriers. This single phase controller supports a variety of operational modes, including step-by-step function and deadman (hold on switched) control. These features ensure precise and safe barrier operation in various scenarios. The control panel offers both automatic and semiautomatic modes of operation, allowing flexibility to meet different user requirements. It is also preset to handle two synchronized barriers simultaneously, functioning as a master/slave system. This makes it an ideal solution for complex barrier installations where coordinated movements are necessary. The ELPRO 980 is equipped with a connector to accommodate a control card for traffic lights with 2/3 lights, further enhancing its versatility. Additionally, an external time clock allows for preset opening and closing operations, providing convenience and efficiency in managing barrier schedules. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: - Photocells/Keyswitch/Radio receiver output: - Pilot light output: - DSA control output: - Flasher output: - Motor run time: - Dwell time: - Box dimensions: - Protection standards: - Working temperature: -

Fadini ELPRO 12 EVO | Control Panel | Single Phase for NYOTA 115 EVO

Product Overview The Fadini ELPRO 12 EVO Control Panel is an advanced single phase electronic controller specifically designed for the NYOTA 115 EVO range of motor operators. This control panel is built to provide reliable and efficient control of gate operations, ensuring smooth and precise movements. It features multiple outputs and a range of programmable functions to suit various operational needs. Key Features Specifically designed for the NYOTA 115 EVO range of motor operators Single phase PCB power supply: 230 V ±10% 50 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Operating temperature range: -20°C to +55°C Product Description The Fadini ELPRO 12 EVO Control Panel is tailored to manage the NYOTA 115 EVO motor operators efficiently. It operates on a single phase power supply of 230 V ±10% at 50 Hz, providing a robust solution for gate automation. With a maximum motor power capacity of 750 W, it ensures powerful and reliable performance. This control panel includes several output options for enhanced functionality. The courtesy light output supports up to 230 V - 100 W for a maximum of 3 minutes, while the photocells/keyswitch/radio receiver output offers 24 V DC with a maximum of 500 mA. Additionally, the pilot light output provides 24 V DC - 3W max, and the flasher output supports 230 V DC/AC. The ELPRO 12 EVO allows for precise control over gate operation timings, with dwell times ranging from 2 to 128 seconds and pedestrian opening times adjustable between 2 to 30 seconds. It is designed to operate within a temperature range of -20°C to +55°C, making it suitable for various environmental conditions. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max. 3 min Photocells/Keyswitch/Radio receiver output: 24 V DC max 500 mA Pilot light output: 24 V DC - 3W max Flasher output: 230 V DC/AC Motor run time: - Dwell time: 2 - 128 S Pedestrian opening time: 2 - 30 S Box dimensions: - Protection standards: - Working temperature: -20°C to +55°C

Fadini ELPRO S40 | Control Panel | Single Phase, Max 4 Automatic Bollards

Product Overview The Fadini ELPRO S40 Control Panel is a single phase electronic controller designed to manage up to 4 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 4 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S40 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to four bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S40 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 2400 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO 37 | Control Panel | Single/Three-Phase for Sliding Gates

Product Overview The Fadini ELPRO 37 Control Panel is a versatile electronic controller designed for sliding gates. It supports both single and three-phase applications, making it suitable for various installation needs. The control panel incorporates an electronic brake for enhanced performance and reliability. It features multiple outputs and a range of programmable functions to ensure smooth and efficient gate operation. Key Features Supports single and three-phase applications Incorporated electronic brake for improved control Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description The Fadini ELPRO 37 Control Panel is designed to provide reliable and efficient control for sliding gates. This electronic controller supports both single and three-phase applications, accommodating various power supply configurations. The integrated electronic brake enhances the control and safety of gate operations, ensuring smooth and precise movements. The control panel features a single phase PCB power supply (230 V ±10% 50/60 Hz) and a three-phase PCB power supply (400 V ±10% 50/60 Hz), allowing flexibility in installation. It supports motors with a maximum power of 750 W for single-phase and 1200 W for three-phase applications. The panel includes outputs for courtesy lights, photocells, keyswitch, radio receiver, pilot light, and DSA control, providing comprehensive control options. The motor run time is adjustable between 0 to 120 seconds, while the dwell time ranges from 1 to 220 seconds, and the pedestrian opening time is adjustable from 1 to 45 seconds. The control panel is housed in a compact box with dimensions of 210 x 295 x 110 mm, ensuring easy installation and integration. It is built to IP64 protection standards, making it suitable for various environmental conditions, and operates effectively in temperatures ranging from -20°C to +55°C. Specifications Single phase PCB power supply: 230 V ±10% 50/60 Hz Three phase PCB power supply: 400 V ±10% 50/60 Hz Max. power of motors: 750 W (single phase), 1200 W (three-phase) Courtesy light output: 12 V AC Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S Dwell time: 1 - 220 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini ELPRO S20 | Control Panel | Single Phase, Max 2 Automatic Bollards

Product Overview The Fadini ELPRO S20 Control Panel is a single phase electronic controller designed to manage up to 2 automatic bollards. This advanced control panel offers comprehensive programmable functions, allowing for both automatic and semiautomatic modes of operation. Featuring removable terminal blocks and luminous diagnostics via LEDs, it ensures easy installation and maintenance. The panel is also equipped with a separated connection for capacitors and is preset to integrate a control card for traffic lights with 2/3 lights and an external time clock. Specifically designed to control the following automatic bollard series: CORAL series VIGILO series TALOS series TALOS M30 Key Features Single phase electronic controller for up to 2 automatic bollards Automatic or semiautomatic modes of operation Removable terminal blocks for easy installation Luminous diagnostics by LEDs Separated connection for capacitors Preset for traffic lights control with 2/3 lights and external time clock Designed for CORAL, VIGILO, TALOS, and TALOS M30 series bollards IP64 protection rating Working temperature range: -20°C to +55°C Product Description The Fadini ELPRO S20 Control Panel is an essential component for managing automatic bollard systems. This single phase controller supports up to two bollards, offering a range of programmable functions to suit various operational needs. Users can select between automatic and semiautomatic modes, ensuring flexibility in operation. The control panel features removable terminal blocks for straightforward wiring and maintenance, while the luminous diagnostics via LEDs provide clear and immediate feedback on system status. The ELPRO S20 is designed with a separated connection for capacitors and is preset to accommodate a control card for traffic lights with 2/3 lights, as well as an external time clock. This makes it a versatile solution for comprehensive traffic and access control. The panel is compatible with the CORAL, VIGILO, TALOS, and TALOS M30 series of automatic bollards, ensuring reliable performance across a range of installations. Specifications Single phase PCB power supply: 230 V ±10% 50 Hz Three phase PCB power supply: - Max. power of motors: 1200 W Photocells/Keyswitch/Radio receiver output: 24 V DC max 250 mA Pilot light output: 24 V - 3W max Flasher output: 230 V - 100 W max Motor run time: 1 - 22 S Dwell time: 1 - 180 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C

Fadini F/746DXL Plate RH

Fadini F/746DXL Right Handed Plate with F-ring with square hole, to be welded to the gate

Fadini F/746SXL Plate LH

Fadini F/746SXL Left Handed Plate with F-ring with square hole, to be welded to the gate

FADINI F/7872L Emergency Manual Release Kit

FADINI F/7872L Emergency Manual Release Kit Enclosure accessories, driving arm and connecting rod, emergency manual release with F-ring with square hole, release spanner, plate to weld and opening/closing gate stops

Fadini F/7047L Elpro 27 | Single Phase Control Panel | Swing/Sliding Gates

Product Overview The Fadini Elpro 27 single phase control panel is designed to efficiently control single or double swinging gates as well as single or bi-parting sliding gates. This versatile electronic controller is equipped with motor capacitors and can handle motor operators with or without limit switches, making it suitable for a wide range of gate automation applications. Key Features Single phase PCB power supply: 230 V ±10% 50/60 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W max DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time: 1 - 220 S Closing gate delay time: 0-10 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description Fadini F/7047L Elpro 27 Single Phase Control Panel The Fadini Elpro 27 control panel is an advanced electronic controller designed for the automation of single or double swinging gates and single or bi-parting sliding gates. This controller is equipped with motor capacitors and supports motor operators with or without limit switches. The Elpro 27 is ideal for various gate automation applications, offering a single phase PCB power supply of 230 V ±10% 50/60 Hz, and a maximum motor power capacity of 750 W. Key outputs of the Elpro 27 include courtesy light output at 230 V - 100 W max, photocells/keyswitch/radio receiver output at 24 V AC, pilot light output at 24 V - 3W max, DSA control output at 24 V AC, and flasher output at 230 V - 25 W max. The control panel provides adjustable motor run time settings (0 - 120 S for sliding gates and 0 - 60 S for swing gates), dwell time (1 - 220 S), closing gate delay time (0-10 S), and pedestrian opening time (1 - 45 S). Encased in a durable box with dimensions of 210 x 295 x 110 mm, the Elpro 27 meets IP64 protection standards and operates efficiently in a working temperature range of -20°C to +55°C. This control panel ensures reliable and safe operation for various gate automation needs. Technical Specifications SpecificationDetails Single phase PCB power supply 230 V ±10% 50/60 Hz Max. power of motors 750 W Courtesy light output 230 V - 100 W max Photocells/Keyswitch/Radio receiver output 24 V AC Pilot light output 24 V - 3W max DSA control output 24 V AC Flasher output 230 V - 25 W max Motor run time 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time 1 - 220 S Closing gate delay time 0-10 S Pedestrian opening time 1 - 45 S Box dimensions 210 x 295 x 110 mm Protection standards IP64 Working temperature -20°C to +55°C

CAME DBS01 pair of cordless bi-directional infrared photocells - Range 10m

Cordless, surface-mounted bi-directional, infrared beam modules, with single contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

CAME DXR10BAP | Adjustable Photocells | 3V Battery | Range 10m

Product Overview The DXR10BAP is a pair of adjustable, surface-mounted, synchronized, and swivelling infrared-beam photocells designed for gate automation systems. These photocells operate on a 3V battery and are capable of a range of up to 10 meters. With a protection rating of IP54, the DXR10BAP photocells are built to withstand various environmental conditions, ensuring reliable performance for your gate automation needs. Key Features Adjustable and synchronized infrared-beam photocells Surface-mounted for easy installation Swivelling design for flexible alignment Operates on 3V battery with additional support for 12-24V AC/DC 10-meter range for effective coverage IP54 protection rating for durability Product Description The DXR10BAP photocells are engineered to enhance the safety and functionality of your gate automation system. These photocells feature an adjustable and synchronized infrared-beam design, providing reliable detection and safety performance. The swivelling capability allows for flexible alignment, ensuring optimal functionality in various installation scenarios. Designed for surface mounting, the DXR10BAP photocells are easy to install and integrate seamlessly with your existing gate automation setup. They operate efficiently on a 3V battery and can also be powered by 12-24V AC/DC, offering versatile power supply options. With a range of up to 10 meters, these photocells provide ample coverage for most residential and commercial gate installations. Rated IP54, the DXR10BAP photocells are protected against dust and water splashes, making them suitable for outdoor use in different environmental conditions. The robust construction ensures long-lasting performance, contributing to the reliability and safety of your gate automation system. Technical Specifications Product Code: DXR10BAP Range: 10 meters Power Supply Voltage: 12V AC, 12V DC, 24V AC, 24V DC, Battery Protection Rating: IP54 Fitting: Surface-mounted Dimensions (Model 806TF-0030): 46mm (B) x 108mm (H) x 37mm (P) Dimensions (Model 806TF-0040): 52mm (B) x 145mm (H) x 39mm (P) Dimensions (Model 806TF-0050): 52mm (B) x 145mm (H) x 39mm (P) Dimensions (Model 806TF-0060): 46mm (B) x 108mm (H) x 37mm (P) Installation and Safety Please ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

CAME Pair of flush mounted photocells with the casing DELTA-I

CAME DELTA-I Pair of flush-mounted photocells. Range 20m. What comes in the box QuantityItem 1 CAME DELTA-I Pair of Photocell's

CAME Pair of photocells DIR10, 10m Range

3 Year guarantee

CAME Pair of photocells DIR20, 20m Range

CAME DIR20 Pair of photocells. Range 20m. What comes in the box QuantityItem 1 CAME DIR20 Pair of Photocell's

CAME Pair of photocells DIR30, 30m Range

CAME DIR30 Pair of photocells. Range 30m. What comes in the box QuantityItem 1 CAME DIR30 Pair of Photocell's

CAME Pair of flush mounted photocells DELTA-SI

CAME DELTA-SI Pair of flush-mounted photocells. Range 20m. What comes in the box QuantityItem 1 CAME DELTA-SI Pair of Photocell's

CAME Natural anodised aluminium post DOC-L

CAME DOC-L Natural Anodised aluminium post for DELTA I and SI photocells. 500mm High. What comes in the box QuantityItem 1 CAME DOC-L Photocell Column

CAME Natural anodised aluminium post DIR-L

CAME DIR-L Aluminium Column for DIR photocells. What comes in the box QuantityItem 1 CAME DIR-L 500mm Aluminium Column in Natural Finish

BPT CAME-G02802 | Photocell Support for DIR Photocells | Designed for G8000

Product Overview The BPT CAME-G02802 is a robust and reliable photocell support designed specifically for DIR photocells used in the G8000 series. This support ensures secure and stable mounting of photocells, enhancing the safety and efficiency of your gate automation system. It is essential to follow the CAME Automotive Barrier Directives and have the installation performed by a qualified professional to avoid any serious injury. Key Features Durable and reliable photocell support. Specifically designed for DIR photocells. Compatible with the G8000 series. Ensures secure and stable mounting of photocells. Enhances the safety and efficiency of gate automation systems. Product Description BPT CAME-G02802 | Photocell Support for DIR Photocells | Designed for G8000 The BPT CAME-G02802 photocell support is designed to provide a secure and stable mounting solution for DIR photocells in the G8000 series. This support is essential for maintaining the proper alignment and functionality of your gate automation system's safety sensors. By ensuring that the DIR photocells are securely mounted, the G02802 support enhances the overall safety and reliability of your gate operation. It is crucial to read the CAME Automotive Barrier Directives PDF prior to purchasing any gate automation product to ensure compliance with safety standards. Additionally, the installation process should be carried out by a qualified professional using the correct tools and materials to prevent any risk of injury. Technical Specifications SpecificationDetails Product Type Photocell Support Compatibility DIR Photocells, G8000 Series The BPT CAME-G02802 is an essential accessory for maintaining the functionality and safety of your gate automation system. Ensure proper installation and compliance with safety directives for optimal performance.