BEA LZR-PS - Power supply for 2x LZR Sensors

Product Overview This 24V DC 0.75A power supply is designed specifically for BEA LZR laser safety sensors. A single unit can power up to two laser safety sensors simultaneously. Each BEA sensor installation requires one appropriate power supply for proper operation.

REMOTE CONTROL - Universal remote control for BEA sensors.

Product Overview Universal remote control for the adjustments of our sensors.  

BEA LZR HOUSING BRACKET - Bracket accessory

Product Overview Bracket Accessory for LZR range. Housing bracket.  

BEA LZR-BA - Bracket accessory

Product Overview Bracket Accessory for LZR range.

BEA LZR - Laser Detection | Barriers and Gates | Horizontal and Vertical

Product Overview BEA's LZR series offers advanced laser-based sensing solutions for various automation and safety applications. The series includes three primary models that utilize time-of-flight technology to create reliable detection fields: LZR-H100: A specialized laser scanner designed for gate and barrier applications, providing an effective alternative to traditional induction loops. LZR-I100/I110: Safety sensors specifically designed for industrial doors, offering optimal protection in the door threshold and its proximity with dynamic detection fields. All models use LASER scanner technology based on time-of-flight measurement, creating precise detection areas that can be easily configured for various installation environments. These sensors represent significant advancements over conventional detection systems like induction loops, contact edges, and photocells. Key Features LZR-H100 Effective Alternative To Loop Detectors: Ideal for applications where cutting ground for loops is prohibited, impossible, or expensive. Trajectory Detection: Ability to detect vehicle trajectory during approach and departure. Reliable And Constant Detection: Time-of-Flight, presence-based, opto-electronic sensor ensures accurate and immediate detection. Pedestrian-Traffic Rejection: Ability to detect or ignore pedestrian traffic. Large Detection Field: Maximum detection field of 32 ft × 32 ft (9.75 m × 9.75 m). Dual-Relay Activation: Two relays allow for activation via motion or presence. LZR-I100/I110 Virtual Opening Buttons: Possibility to create 2 virtual push buttons to open the door. Separate Detection Areas: Safety at the opening and the closing of the door thanks to 2 separate detection areas. Alternative Solution: Replaces current safety solutions such as contact edges, light beams, and lightgrids. Industrial Optimization: IP65 rated, 10m cable included, filters door vibrations and environmental interferences. Easy Installation: Easy positioning of the detection field thanks to 3 visible LASER beams. Automatic Configuration: Automatic teach-in of door dimensions and various settings via BEA's remote control. Technical Specifications SpecificationLZR-H100LZR-I100LZR-I110 Primary Application Gate and barrier applications Safety for industrial doors Technology LASER scanner, Time-of-Flight LASER scanner, Time-of-Flight Detection Mode Motion and presence Presence Max. Detection Range 32 ft × 32 ft (9.75 m × 9.75 m) 9.9 m × 9.9 m 5 m × 5 m IR LASER Wavelength 905 nm; max. output pulse power 0.10 mW (CLASS 1) Wavelength 905 nm; output power <0.10 mW (CLASS 1) Visible LASER Wavelength 635 nm; max. output CW power 3 mW (CLASS 2R) Wavelength 635 nm; output power Supply Voltage 10-35 VDC @ sensor terminal 10-35V DC @ sensor terminal Power Consumption < 5 W < 5 W Response Time Motion: typ. 200 ms (adjustable)Presence: typ. 20 ms (max. 80 ms) Typ. 20 ms; max. 80 ms Outputs 2 electronic relays (galvanic isolated - polarity free) 2 electronic relays (galvanic isolation - polarity free) Dimensions 3⅝" (W) × 2¾" (H) × 5" (D) 125 mm (L) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Material/Color PC/ASA - Black PC/ASA - Black/White Protection Degree NEMA 4/IP65 IP65 Operating Temperature -22°F to 140°F (-30°C to 60°C) if powered -30°C to +60°C if powered Cable Length 33' 10 m Special Features Pedestrian detection/rejection capability Virtual push button capability, automatic teach-in of door dimensions

BFT Thea - Pair of Hardwired Photocells with built-in flashing light

Product Overview The THEA is a patented BFT solution combining an adjustable photocell with an integrated flashing light. This innovative design features a lens that can be adjusted both horizontally and vertically, with IR signal synchronization to prevent blinding. Designed for external applications, it offers comprehensive coverage with its adjustable beam direction. Technical Specifications Voltage 24V ac/dc Absorbed Power Transmitter: 27mA Receiver: 17mA stand-by Receiver: 38mA max Protection Rating IP55 Temperature Range -20°C / +55°C Range 30m Adjustment 40° horizontally and 30° vertically U-Link Compatible No Key Features Integrated flashing light Adjustable lens system 40° horizontal adjustment 30° vertical adjustment 30m operating range Synchronized IR signal IP55 protection for external use Patented BFT design

Locinox DINO | 180° Double Bearing Hinge | Aluminium Housing, Stainless Steel Bearings

Product Overview The Locinox DINO is a robust 180° double bearing hinge designed for gates. Featuring an aluminium housing and stainless steel bearings, this hinge ensures a smooth and reliable opening and closing mechanism. The DINO hinge is easy to install with the innovative Quick-Fix system, providing a secure and vandal-proof fixing. Its aesthetic design makes it an ideal choice for both functional and stylish gate installations. Key Features 180° opening angle Contains 2 stainless steel bearings for smooth operation Anti-theft and vandal-proof fixing Compatible with Mammoth-180 Supports gates up to 150 kg (maximum width of 1.5 m) Suitable for left & right turning gates Aesthetic design with powder-coated aluminium housing Fast and easy installation with Quick-Fix Sold per pair Product Description Specifications Opening Angle: 180° Bearings: 2 stainless steel bearings Fixing: Anti-theft and vandal-proof Compatibility: Can be combined with Mammoth-180 Gate Capacity: Up to 150 kg (max width 1.5 m) Turning Direction: Left & right turning gates Design: Aesthetic, powder-coated aluminium housing Installation: Quick-Fix system Packaging: Packed per pair The Locinox DINO hinge is designed for those who need a reliable and durable solution for their gates. The hinge features a 180° opening angle, making it versatile for various gate applications. The inclusion of two stainless steel bearings ensures a smooth and seamless operation, reducing wear and tear on the gate and the hinge itself. The DINO hinge is built with security in mind. Its anti-theft and vandal-proof fixing system ensures that the hinge remains securely in place, providing peace of mind. The hinge is also compatible with the Mammoth-180, allowing for further customization and enhancement of your gate system. Constructed from powder-coated aluminium, the DINO hinge not only offers a sleek and modern aesthetic but also provides excellent durability and resistance to the elements. The Quick-Fix installation system makes the hinge easy to mount, saving time and effort during the setup process. This hinge is suitable for gates up to 150 kg in weight and with a maximum width of 1.5 m, making it a versatile choice for various gate types. Whether you need a hinge for a left or right turning gate, the DINO hinge meets the requirements with its robust design and flexible installation options. NOTE: Images may differ from the actual product.

LOCINOX RHINO | 180° Gate Closer | Hydraulic, Direct Hinge Connection

Product Overview The RHINO Aesthetical 180° Gate Closer is designed to transform your 180° hinge into a self-closing solution. With a direct connection to the Locinox hinge, the Rhino hydraulic gate closer offers a discreet look and efficient energy transmission to ensure the gate closes perfectly every time. The anodized aluminium housing provides durability and smooth operation in any weather condition. For an extremely efficient installation, the Rhinodrill jig is recommended. Key Features 180° hydraulic gate closer with adjustable speed and final snap Closing speed unaffected by temperature changes Compact and aesthetic design Scratch resistant and corrosion-free anodized aluminium housing Direct assembly on 180° hinges M16 & M20 (GBMU & GBMU4D) Bearing eyebolt recommended (1034ROLL-M16) Integrated pre-tension for extremely smooth installation Suitable for left and right turning gates Easy to open with a maximum of 20 Nm Product Description The RHINO Hydraulic 180° Gate Closer offers a robust and aesthetically pleasing solution for self-closing gates. The direct connection to Locinox hinges ensures a seamless integration and efficient energy transmission, allowing the gate to close smoothly and securely. The anodized aluminium housing provides a durable, scratch-resistant, and corrosion-free finish, ensuring long-lasting performance in any weather condition. Installation and Usage Installing the RHINO gate closer is straightforward, especially when using the recommended Rhinodrill jig for precision. The integrated pre-tension feature ensures an extremely smooth installation process. This gate closer is compatible with 180° hinges M16 & M20 (GBMU & GBMU4D) and is suitable for both left and right turning gates. The adjustable speed and final snap feature allow for customized closing settings, ensuring the gate closes smoothly and securely every time. With a maximum opening force of 20 Nm, the gate remains easy to open while offering robust closing capabilities. Durability and Protection The RHINO gate closer's anodized aluminium housing provides excellent resistance to scratches and corrosion, ensuring it remains functional and visually appealing over time. The hydraulic mechanism is designed to operate smoothly in various weather conditions, maintaining consistent performance regardless of temperature fluctuations. This combination of durability and adaptability makes the RHINO gate closer a reliable choice for all gate applications.

LOCINOX MAMMOTH-HD | 180° Hydraulic Gate Closer and Hinge-in-One | Heavy Duty

Product Overview The MAMMOTH-HD is a highly powerful hydraulic 180° gate closer and hinge-in-one, designed to close the heaviest gates with ease. This heavy-duty gate closer combines the hydraulically damped Mammoth with the powerful self-closing Raptor hinge, making it the ideal solution for gates up to 200 kg and 2000 mm wide. Equipped with double bearings, both hinges guarantee extremely smooth functioning. The Active Thermal System ensures a constant closing speed, unaffected by weather conditions. The Raptor hinge is included in this set. Key Features 180° hydraulic gate closer with adjustable speed and final snap Aesthetic design with powder-coated aluminium housing Closing speed unaffected by temperature changes Easy to open with a maximum of 32 Nm Vandal-proof construction Suitable for left and right turning gates Easy mounting with Quick-Fix Product Description The MAMMOTH-HD hydraulic gate closer and hinge-in-one is designed for heavy-duty applications, capable of handling gates up to 200 kg and 2000 mm wide. Its hydraulically damped mechanism ensures smooth and controlled closing, while the powerful self-closing Raptor hinge enhances its functionality. The Active Thermal System maintains a constant closing speed regardless of weather conditions, ensuring reliable performance year-round. Installation and Usage Installing the MAMMOTH-HD is straightforward, thanks to the Quick-Fix system. The gate closer is suitable for both left and right turning gates, providing versatility in various installations. The adjustable speed and final snap feature allow for customized closing settings, ensuring the gate closes smoothly and securely every time. With a maximum opening force of 32 Nm, the gate remains easy to open while offering robust closing capabilities. Durability and Protection Constructed with a powder-coated aluminium housing, the MAMMOTH-HD is built to withstand harsh environmental conditions. Its vandal-proof design adds an extra layer of security, making it suitable for high-traffic and public areas. The double bearings in the hinges ensure long-lasting smooth operation, while the Active Thermal System guarantees consistent performance regardless of temperature fluctuations.

GATEMASTER DGLS Select Pro Digital Gatelock - Fits Up to 60mm Gate Frame

Product Overview The DGLS Select Pro Digital Gatelock offers a keyless entry solution for gates, perfect for increasing security and convenience. This single-sided digital lock features access via code entry and a simple lever/handle action to exit. Designed with marine grade materials, this lock is built to last and withstand harsh conditions. Key Features Single-sided digital access: Enter the code to unlock, exit with a simple lever/handle action. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Marine grade keypad ensures long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Latchbolt moves 22mm (7/8"). Includes a brushed finish stainless steel bolt support plate with brass bearing to reduce friction and wear, enhancing product life. Strike plate included for smooth operation. Hold-back function allows the gate to remain unlocked for short periods. Product Details Product CodeDescription DGLS01R To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand DGLS01L To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand DGLS02R To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand DGLS02L To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when the gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length and/or change to RH/LH, insert a 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER DGL Select Pro Digital Gatelock Double Sided - Fits Up to 60mm Gate Frame

Product Overview The DGL Select Pro Digital Gatelock is designed for those seeking keyless entry through gates. This double-sided digital lock allows access via code from both sides, ensuring secure and convenient entry. Made with marine grade keypads, it is built for durability and heavy use. The lock automatically latches into the gate frame when the gate closes, and can only be removed when the gate is open, requiring the code. Key Features Double-sided digital access via code from both sides. Auto-latching mechanism: closes the door and latches the latchbolt into the gate frame. Marine grade keypads ensure long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Adjustable latchbolt that moves 22mm (7/8"). Brushed finish stainless steel bolt support plate with brass bearing reduces friction, wear, and increases product life. Includes strike plate. Product Details Product CodeDescription DGL01 To fit 10-30mm (1/2" - 1-1/4") gate frames DGL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length or change to RH/LH, insert 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER SBD Select Pro Bolt-on Deadlock - No Handle - Fits Up to 60mm Gate Frame

Product Overview The SBD Select Pro bolt-on deadlock is a convenient and robust locking solution for various applications. Designed to eliminate the need for padlocks or slide bolts, this deadlock secures gates with a simple turn of the key, extending the stainless steel deadbolt 30mm. It is perfect for heavy use gates in communal areas, schools, and alleys. Key Features Keyed access on both sides. Compatible with both left-hand and right-hand gates. Adjustable deadbolt (up to 27mm) for precise fitting on site. One-piece machined stainless steel locking bolt. Easy installation with only three holes required in the gate frame. 5 pin eurocylinder for enhanced security. Supplied with a bolt support plate featuring a brass bearing to reduce friction and wear, increasing product life. Designed for heavy use gates. 30mm bolt throw for added security. Square case design easily incorporates into various gate designs. Marine grade, salt spray tested for 1000 hours. Product Details Product CodeDescription SBD1601 To fit 10-30mm (1/2" - 1-1/4") gate frames SBD1602 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Deadbolt: Adjustable, moves 30mm (1-1/8"). Suitable for both left-hand and right-hand gates. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using the stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill a clearance hole in the keep or outer frame to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fit the strike plate by either welding or screw fixing it to the gate post. Ensure the latchbolt moves freely without binding on the gate or frame. Maintenance: Every two months, lubricate the latchbolt with light oil. Annually, dismantle the lock and spray the mechanism inside with light oil. Video Click to watch the installation video

GATEMASTER APS Hydraulic Gate Closer & Hinge Kit | Safe & Reliable Self-Closing Gates

Product Overview The APS Hydraulic Gate Closer & Hinge Kit is designed to provide safe and reliable gate closing using proven hydraulic technology. This kit is ideal for gates that need to be self-closing, ensuring security and convenience without the need for power. The kit comes with either a standard wrap-around hinge (APS) or a stop hinge (APSSTOP) that prevents the gate from opening more than 100°. Key Features Hydraulic gate closer and top hinge kit for self-closing gates Suitable for gates up to 150kg No power required Fully adjustable ROSPA compliant closing speed with closing and latching speed adjustments Robust closer unit fitted underneath the gate, acts as a load-bearing lower hinge Unobtrusive and highly vandal-resistant design Includes a top hinge assembly that is fully adjustable for correct gate positioning Product Description The APS Hydraulic Gate Closer & Hinge Kit is an advanced solution for gates requiring reliable and safe self-closing functionality. The hydraulic closer and hinge kit is suitable for gates weighing up to 150kg and does not require any power source, making it an efficient and eco-friendly choice. The closer unit, fitted underneath the gate, also serves as a load-bearing lower hinge, ensuring robustness and stability. The kit includes fully adjustable closing and latching speed settings, compliant with ROSPA standards, to provide controlled and safe gate operation. The hydraulic gate closer is unobtrusive and highly resistant to vandalism, ensuring long-lasting durability and security. Additionally, the top hinge assembly is fully adjustable, allowing for precise gate positioning after installation. The APS kit comes in two versions: APS: Hydraulic gate closer with standard wrap-around hinge APSSTOP: Kit with a special stop hinge to prevent the gate from opening more than 100°, protecting the closer from damage Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Attach the hydraulic gate closer unit underneath the gate, ensuring it acts as the load-bearing lower hinge. Install the top hinge assembly, adjusting as necessary to position the gate correctly. Adjust the closing and latching speed settings to ensure safe and controlled gate operation. Maintenance Regular maintenance will ensure the longevity and proper functioning of the APS Hydraulic Gate Closer & Hinge Kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the closer and hinges for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription APS Hydraulic gate closer with standard wrap-around hinge APSSTOP Kit with special stop hinge to prevent gate from opening more than 100°, protecting the closer from damage Dimensions Specific dimensions are available upon request or from the product specifications sheet. For more information, refer to the specification sheet available for download.

ROLLING CENTRE Medium Kit 4 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 4 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No ground work required Ideal for uneven ground Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 4 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 4 includes the following components: 3 x 3m GIPI 5 RGZ3 Galvanised Track, supplied in 3 x 3m tracks 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 4 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 3 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 3 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 3 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 3 includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Medium Kit 2 | Cantilever Gates Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 2 is designed for cantilever gates with clear openings up to 8m and a maximum weight of 600kg. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track, minimal ground work required, lower labor costs, reduced maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 8m Supports gates up to 600kg No track to lay Minimal ground work required Lower cost of labor Reduced maintenance Suitable for intensive use Sleek finish Product Description The Medium Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 8m in clear opening and 600kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Medium Kit 2 includes the following components: 2 x 4.5m GIPI 5 RGZ4.5 Galvanised Track, supplied in 2 x 4.5 metre lengths 2 x CA4RS Medium 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points made from S235 structural grade steel with a galvanized finish Specifications: Medium Carriage Drawing Medium Carriage Table Medium Meeting Point Drawing Medium Meeting Point Table Medium Support Wheel Drawing Medium Support Wheel Table Medium Track Drawing Medium Track Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions The components included in the Medium Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 4 | Cantilever Gates Up to 6m Opening & 450kg Weight | Non-Galvanised Track

Product Overview The Mini Kit 4 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features a non-galvanised track, providing an economical option for various applications. Cantilever gate systems are widely used in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no requirement to lay track in the ground, minimal ground work required, lower labor costs, less maintenance, and suitability for intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg No requirement to lay track in the ground Minimal ground work required Lower cost of labor Less maintenance Suitable for intensive use Aesthetically pleasing finish Product Description The Mini Kit 4 cantilever gate system offers a reliable and cost-effective solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a practical and economical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 4 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI4RP6 mini cantilever track, non-galvanised Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 4 are constructed from high-grade materials to ensure durability and longevity. While the track is non-galvanised, the remaining components feature a galvanized finish, providing additional protection against corrosion and making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 3 | Silent Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 3 Silent Kit is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. This kit features super silent carriages with MAPAR wheels, which reduce rolling noise by 35% compared to traditional carriages. The lightness of MAPAR wheels also means lower rolling resistance and less energy needed to move the gate. Silent cantilever gate systems are widely used in commercial, public sector, and residential environments due to their many benefits over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. Key Features Clear gate openings up to 6m Supports gates up to 450kg 35% less noise with silent cantilever systems No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 3 Silent Kit for cantilever gates is engineered to provide a quiet and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit includes all necessary components for a seamless installation and operation. Silent cantilever gate systems are preferred for their minimal noise production and ease of installation. The super silent carriages with MAPAR wheels reduce rolling noise by 35% compared to traditional carriages. This feature makes the system ideal for environments where noise reduction is a priority. The lightness of MAPAR wheels also results in lower rolling resistance and less energy needed to move the gate, enhancing overall efficiency. The Mini Kit 3 includes the following components: 2x SILENT P mini silent 8-wheeled carriages with MAPAR wheels 2x 50B meeting points made from 235 structural grade steel with a galvanized finish 2x 41BS mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 1x 6m GIPI 4 RPZ6 track made from S280GD structural grade steel Specifications: Silent P Carriage Drawing Silent P Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 3 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

ROLLING CENTRE Mini Kit 2 | Cantilever Gates Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 2 is designed for cantilever gates with clear openings up to 6m and a maximum weight of 450kg. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no track to lay into the ground, limited ground work required, reduced labor costs, lower maintenance, and capability of intensive use. The sleek finish and robust construction make it ideal for various applications. Key Features Clear gate openings up to 6m Supports gates up to 450kg No track to lay into the ground Limited ground work required Reduced labor costs Lower maintenance Capable of intensive use Sleek finish Product Description The Mini Kit 2 cantilever gate system provides a reliable and efficient solution for managing large and heavy gates in various settings. Designed to support gates up to 6m in clear opening and 450kg in weight, this kit offers a comprehensive package that includes all necessary components for installation and operation. Cantilever gate systems are favored for their ease of installation and low maintenance requirements. Unlike traditional sliding gates, the cantilever system does not require a track to be laid into the ground, significantly reducing the groundwork and labor costs. This makes it a cost-effective and practical solution for intensive use in commercial, public sector, and residential environments. The Mini Kit 2 includes the following components: 1 x 6m GIPI 4 RPZ6 Galvanised Track made from S280GD structural grade steel 2 x CA4RPS Mini 8-wheeled cantilever carriages made from S235 structural grade steel body with C45 case-hardened carbon steel bearings 2 x 41B/S Mini support wheels with plate, made from S235 structural grade steel body and case-hardened C45 carbon steel roller bearing with a galvanized finish 2 x 50B Meeting Points made from 235 structural grade steel with a galvanized finish Specifications: Mini Carriage Drawing Mini Carriage Table Mini Meeting Point Drawing Mini Meeting Point Table Mini Support Wheel Drawing Mini Support Wheel Table Mini Track Drawing Mini Track Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions The components included in the Mini Kit 2 are constructed from high-grade materials to ensure durability and longevity. The galvanized finish provides additional protection against corrosion, making it suitable for various weather conditions and environments.

CDVI Mains Powered Universal Receiver RX26-MF Rolling Code Mains Powered Universal Receiver, Rolling Code. The photocells from ERONE provide a range of active infrared beams which will activate if the beam is cut between the transmitter at one end and receiv

Product Overview The RX26-MF is a versatile mains powered universal receiver designed to provide secure and reliable RF signal reception. Utilizing rolling code technology, this receiver ensures high-security communication. It supports multiple transmitters, making it suitable for various applications such as automated gates, garage doors, and access control systems. Key Features Mains powered for continuous operation Rolling code KeeLoq technology for enhanced security Supports multiple transmitters High-security receiver with IP55 rating Easy installation and integration with existing systems Product Description The RX26-MF universal receiver is designed for secure and efficient signal reception in a variety of applications. Featuring rolling code KeeLoq technology, this receiver provides enhanced security by constantly changing the transmitted signal. This makes it ideal for use in both residential and commercial environments where security is a priority. The receiver operates on a frequency of 433.92MHz with ASK modulation and uses KeeLoq hopping code for secure data transmission. It is housed in a durable polycarbonate casing, suitable for both internal and external use. The RX26-MF supports multiple transmitters, making it a versatile solution for different RF communication needs. Technical Specifications SpecificationDetails Frequency 433.92MHz Modulation ASK Encoding Keeloq hopping code Power Supply 230Vac Dimensions 90 x 60 x 22mm IP Rating IP55 Additional Information The RX26-MF receiver is an excellent choice for secure and reliable RF signal reception in various settings. Its robust design, advanced technology, and user-friendly programming make it a versatile solution for access control and other applications. The durable polycarbonate housing ensures long-lasting performance and protection against environmental factors. Included in the Box 1 x RX26-MF Receiver Installation manual

NICE Pair of Outdoor Photocells EPM | 15m Range |

Product Overview The Nice Era EPM medium-sized outdoor photocells are designed with self-alignment technology, making them perfect for residential and industrial settings. These photocells feature a stylish and sturdy design, offering reliable obstacle detection with a range of up to 15 meters and an 8-degree receiving angle.  Key Features Medium-sized photocells with self-alignment technology 15-meter range with an 8-degree angle of reception Antiglare circuit to eliminate sunlight interference Stylish and sturdy ABS body, resistant to all conditions Relay photocell with a power supply of 14 VAC/DC Product Description The Nice Era EPM photocells are essential for enhancing the safety and efficiency of automated gate and garage door systems. Designed for both residential and industrial applications, these photocells offer a range of up to 15 meters and feature self-alignment technology for easy setup. The 8-degree receiving angle ensures accurate detection of obstacles, while the antiglare circuit prevents interference from sunlight. Stylish and Sturdy Design The EPM photocells boast a stylish and sturdy design with an ABS body that is resistant to various weather conditions. This durability ensures long-lasting performance, making them suitable for both indoor and outdoor installations. Reliable Obstacle Detection The EPM photocells provide reliable obstacle detection, enhancing the safety of automated systems by preventing accidents and ensuring smooth operation. The relay photocell design ensures that any interruption in the light beam will change the receiver's status, sending a signal to stop or reverse the gate or door. Specifications Range: 15 meters Angle of Reception: 8 degrees Antiglare Circuit: Yes Material: ABS body Power Supply: 14 VAC/DC Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice Era EPM photocells are ideal for use in automated gate and garage door systems in residential, commercial, and industrial settings. Their advanced features, reliable performance, and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

Pair of Outdoor Burglar-Resistant BlueBUS Photocells with Metal Body | Nice EPSAB

Product Overview The Nice EPSAB BlueBUS Photocells are advanced, burglar-resistant photocells designed to enhance the safety and security of automated garage doors and gates. Featuring a durable aluminum reinforced housing and a range of up to 15 meters, these photocells provide reliable obstacle detection and are essential for any automated system. The BlueBUS system ensures easy installation with just two wires connecting the controller and accessories. Key Features Burglar-resistant design with reinforced aluminum housing Compatible with Nice BlueBUS system Range of up to 15 meters under normal conditions Self-alignment feature for easy installation Slim design for unobtrusive placement Relay contact signal when photocell beam is engaged Includes receiver and transmitter modules Simple two-wire connection for controller and accessories Product Description The Nice EPSAB BlueBUS Photocells are essential safety devices for any automated gate or garage door system. With a range of up to 15 meters and a burglar-resistant metal body, these photocells ensure reliable obstacle detection and enhance the security of your property. The self-alignment feature simplifies installation, and the BlueBUS system allows for easy connections using just two wires. Durable and Secure Design The EPSAB photocells feature a reinforced aluminum housing, providing enhanced durability and resistance to tampering. This makes them an excellent choice for high-security applications, ensuring that your automated system remains safe and reliable. Advanced Functionality Equipped with a self-alignment feature, the EPSAB photocells are easy to install and adjust, ensuring accurate detection of obstacles. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring the gate or door stops or reverses to avoid collisions. Easy Installation with BlueBUS The BlueBUS system simplifies the installation process by allowing all connections between the controller and accessories to be performed using just two wires. This reduces installation time and effort, making the EPSAB photocells a convenient and efficient choice for any automated system. Specifications Range: Up to 15 meters Compatibility: Nice BlueBUS system Material: Reinforced aluminum housing Design: Slim Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Nice EPSAB BlueBUS Photocells are ideal for use in residential, commercial, and industrial automated gate and garage door systems. Their burglar-resistant design and reliable performance make them a valuable addition to any automated setup, ensuring enhanced safety and security.

NICE Pair of Slim Outdoor Photocells EPS | Estimated 15m Range | Burglar-Resistant

Product Overview The Pair of Slim Outdoor Photocells EPS from NICE are essential safety devices designed for use with automated garage doors and gates. Featuring an estimated range of 15 meters and a burglar-resistant version, these synchronized photocells provide reliable obstacle detection and enhanced security. The package includes a receiver module, transmitter module, assembly screws, and instructions for easy installation. Key Features Estimated range of 15 meters Slim design for easy installation Synchronized for enhanced reliability Burglar-resistant version available Essential for safety in automated garage doors and gates Includes receiver and transmitter modules Simple installation with included screws and instructions Relay contact signal when photocell beam is engaged Product Description The Slim Outdoor Photocells EPS from NICE are designed to enhance the safety and security of your automated garage door or gate system. These synchronized photocells, available in a burglar-resistant version, detect obstacles by sensing the interruption of a light beam between the transmitter and receiver modules. Enhanced Safety and Security The EPS photocells are an essential safety component for any automated garage door or gate. When the light beam is interrupted, the receiver module changes its status and sends a signal via a relay contact, ensuring that the door or gate stops or reverses to avoid collisions. Reliable Performance With an estimated range of 15 meters, the EPS photocells provide reliable performance under normal conditions. The synchronized design ensures accurate detection, and the burglar-resistant version adds an extra layer of security, making it more difficult for intruders to bypass the system. Easy Installation The slim design of the EPS photocells allows for easy and unobtrusive installation. The package includes all necessary components, such as the receiver and transmitter modules, assembly screws, and detailed instructions, making the installation process straightforward and hassle-free. Specifications Range: Estimated 15 meters Design: Slim Usage: Outdoor Type: Synchronized, burglar-resistant Signal: Relay contact when beam is engaged Package Contents Receiver module Transmitter module Assembly screws Instructions Applications The Slim Outdoor Photocells EPS are ideal for use in residential, commercial, and industrial automated garage door and gate systems. Their reliable performance and easy installation make them a valuable addition to any automated setup, ensuring enhanced safety and security.

LOCINOX MAMMOTH-180 Hydraulic 180° Gate Closer and Hinge | Self-Closing Hinge

Product Overview The MAMMOTH-180 Hydraulic 180° Gate Closer and Hinge is an elegant and powerful self-closing hinge designed for 180° gate situations. Ideal for gates up to 150 kg and 1500 mm wide, this gate closer and hinge combination ensures smooth and reliable operation. Equipped with a double bearing for exceptional functionality and the Active Thermal System, it guarantees a constant closing speed regardless of weather conditions. The Dino hinge is included for added convenience. Key Features Self-closing hinge with patented hydraulic damping Aesthetic design Powder-coated aluminium housing Constant closing speed unaffected by temperature changes Easy to open: Max. 16 Nm Vandal-proof Suitable for left and right opening gates Easy mounting with Quick-Fix 2-dimensionally adjustable (2 x 20 mm) Product Description The MAMMOTH-180 Hydraulic 180° Gate Closer and Hinge combines elegance and power in a self-closing hinge designed for a wide range of gate applications. This versatile hinge is perfect for gates weighing up to 150 kg and measuring up to 1500 mm in width. Its innovative design includes a double bearing system that ensures exceptional functionality and longevity. Active Thermal System One of the standout features of the MAMMOTH-180 is its Active Thermal System, which maintains a consistent closing speed regardless of temperature fluctuations. This ensures reliable performance in all weather conditions, making it suitable for various environments. Durable and Aesthetic Design The MAMMOTH-180 is built with a powder-coated aluminium housing, providing both durability and a sleek, aesthetic appearance. Its design not only enhances the visual appeal of your gate but also offers vandal-proof protection. Easy Installation and Adjustability Installation is straightforward with the Quick-Fix mounting system, and the hinge is 2-dimensionally adjustable (2 x 20 mm) to fit various gate configurations. This flexibility allows for easy adjustments and ensures a perfect fit. Specifications Self-closing hinge with patented hydraulic damping Max gate weight: 150 kg Max gate width: 1500 mm Easy to open: Max. 16 Nm Suitable for left and right opening gates 2-dimensionally adjustable (2 x 20 mm) Powder-coated aluminium housing RAL Colour Availability The MAMMOTH-180 is available in various RAL colours to match your gate and surroundings. Drawings and Dimensions Detailed drawings and dimensions of the MAMMOTH-180 are available for precise installation and setup.

ROLLING CENTRE Magnum2 Kit 1 for Cantilever Gates | Up to 18m Opening & 2200kg Weight

Product Overview The Magnum2 Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 18 meters and supporting gates up to 2200kg in weight. Cantilever gate systems are the ideal applications for commercial, public sector, and industrial gates where there is intensive use due to the robustness of the cantilever mechanism, providing a high level of security. These systems offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 18 meters Handles gates up to 2200kg in weight No track required No ground work needed Low maintenance Suitable for intensive use High level of security Product Description The Magnum2 Kit 1 for cantilever gates is an efficient and reliable solution for supporting gates with a clear opening up to 18 meters and weighing up to 2200kg. This cantilever kit is ideal for various environments including commercial, public sector, and industrial settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a high level of security suitable for intensive use. Included in the Kit The kit includes the following components: 2 x 6m GIPI 4RM2C6 Magnum2 Hot Galvanised Track 2 x CA4RMS2 8-wheeled Magnum2 Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum2 Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Hot Galvanised Track: 2 x 6m GIPI 4RM2C6 made from structural grade steel Magnum2 Cantilever Carriages: CA4RMS2, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum2 Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum2 Carriage Drawing and Table Magnum2 Meeting Point Drawing and Table Magnum2 Support Wheel Drawing and Table Magnum2 Track Drawing and Table

ROLLING CENTRE Magnum Kit 1 for Cantilever Gates | Up to 16m Opening & 1200kg Weight

Product Overview The Magnum Kit 1 is a heavy-duty cantilever gate system designed for clear gate openings up to 16 meters and supporting gates up to 1200kg in weight. Cantilever gate systems are often chosen for industrial or commercial installations due to their robust mechanism which provides a high degree of security. These systems work equally well on residential gates and offer several advantages over traditional sliding gates, including no need for ground tracks, minimal ground work, lower maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 16 meters Handles gates up to 1200kg in weight No track required No ground work needed Limited maintenance Ideal for intensive use Aesthetically pleasing design Product Description The Magnum Kit 1 for cantilever gates is a robust and reliable solution for supporting gates with a clear opening up to 16 meters and weighing up to 1200kg. This cantilever kit is ideal for various environments including industrial, commercial, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing maintenance, and providing a sleek and aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 2 x 6m GIPI 6RMZ6 Magnum Zinc Galvanised Track 2 x CA4RMS 8-wheeled Magnum Cantilever Carriages 2 x 41G/S Magnum Cantilever support wheels with plates and rubber stops 2 x 50G Magnum Meeting Points Specifications The Magnum Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 2 x 6m GIPI 6RMZ6 made from structural grade steel Magnum Cantilever Carriages: CA4RMS, 8-wheeled, made from structural grade steel with case-hardened carbon steel bearings Magnum Support Wheels: 41G/S, with plates and rubber stops Meeting Points: 50G, made from structural grade steel, galvanised finish Dimensions Magnum Carriage Drawing and Table Magnum Meeting Point Drawing and Table Magnum Support Wheel Drawing and Table Magnum Track Drawing and Table MAGNUMKIT Dimensions MAGNUMKIT GIPI6 RMZ6 Dimensions

ROLLING CENTRE Medium Kit 1 for Cantilever Gates | Up to 8m Opening & 600kg Weight

Product Overview The Medium Kit 1 is a robust cantilever gate system designed for clear gate openings up to 8 meters and supporting gates up to 600kg in weight. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need for ground tracks, minimal ground work, lower labor costs, reduced maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 8 meters Handles gates up to 600kg in weight No track to lay Limited ground work needed Lower cost of labor Reduced maintenance Capable of intensive use Sleek finish Product Description The Medium Kit 1 for cantilever gates is an efficient and reliable solution for supporting gates with a clear opening up to 8 meters and weighing up to 600kg. This cantilever kit is ideal for various environments including commercial, public sector, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing labor costs, and necessitating less maintenance. These features make the system suitable for intensive use while maintaining a sleek and aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 1 x 6m GIPI 5 RGZ6 Galvanised Track 1 x 3m GIPI 5 RGZ3 Galvanised Track 2 x CA4RS Medium 8-wheeled cantilever carriages (S235 structural grade steel body with C45 case-hardened carbon steel bearings) 2 x 41P/S Medium support wheels with cover 2 x 50P Meeting Points (S235 structural grade steel, galvanised finish) Specifications The Medium Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 6m GIPI 5 RGZ6 and 3m GIPI 5 RGZ3 made from structural grade steel Medium Cantilever Carriages: CA4RS, 8-wheeled, made from S235 structural grade steel with C45 case-hardened carbon steel bearings Medium Support Wheels: 41P/S, with cover Meeting Points: 50P, made from S235 structural grade steel, galvanised finish Dimensions Medium Carriage Drawing and Table Medium Meeting Point Drawing and Table Medium Support Wheel Drawing and Table Medium Track Drawing and Table Mediumkit GIPI5 RGZ Dimensions MEDIUMKIT Dimensions

ROLLING CENTRE Mini Kit 1 for Cantilever Gates | Up to 6m Opening & 450kg Weight

Product Overview The Mini Kit 1 is a comprehensive cantilever gate system designed for clear gate openings up to 6 meters and supporting gates up to 450kg in weight. Cantilever gate systems are preferred in commercial, public sector, and residential environments due to their numerous advantages over traditional sliding gates, such as no need for ground tracks, minimal ground work, lower labor costs, less maintenance, and suitability for intensive use. Key Features Supports clear gate openings up to 6 meters Handles gates up to 450kg in weight No requirement to lay track in the ground Minimal ground work required Lower cost of labor Less maintenance Suitable for intensive use Aesthetically pleasing design Product Description The Mini Kit 1 for cantilever gates is a reliable and durable solution for supporting gates with a clear opening up to 6 meters and weighing up to 450kg. This cantilever kit is ideal for various environments including commercial, public sector, and residential settings. Cantilever gate systems offer significant benefits over traditional sliding gates, such as eliminating the need for ground tracks, requiring minimal ground work, reducing labor costs, and necessitating less maintenance. These features make the system suitable for intensive use while maintaining an aesthetically pleasing appearance. Included in the Kit The kit includes the following components: 1 x 6m GIPI 4 RPZ6 Galvanised Track (S280GD structural grade steel) 2 x CA4RPS Mini 8-wheeled cantilever carriages (S235 structural grade steel body with C45 case-hardened carbon steel bearings) 2 x 41B/S Mini support wheels with plate (S235 structural grade steel body and case-hardened C45 carbon steel roller bearing, galvanised finish) 2 x 50B Meeting Points (235 structural grade steel, galvanised finish) Specifications The Mini Kit 1 is constructed from high-quality materials ensuring durability and long-lasting performance: Galvanised Track: 6m GIPI 4 RPZ6 made from S280GD structural grade steel Mini Cantilever Carriages: CA4RPS, 8-wheeled, made from S235 structural grade steel with C45 case-hardened carbon steel bearings Mini Support Wheels: 41B/S, with plate, made from S235 structural grade steel and C45 case-hardened carbon steel roller bearings, galvanised finish Meeting Points: 50B, made from 235 structural grade steel, galvanised finish Dimensions Mini Carriage Drawing and Table Mini Meeting Point Drawing and Table Mini Support Wheel Drawing and Table Mini Track Drawing and Table MINIKIT Dimensions Minikit GIPI4 RPZ6 Dimensions

FAAC Safebean Column (MAX HEIGHT 628MM)

Suitable for FAAC SAFEBEAM, XP20B & XP 20W Wireless Max height 628mm    

CAME DBS01 pair of cordless bi-directional infrared photocells - Range 10m

Cordless, surface-mounted bi-directional, infrared beam modules, with single contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

CAME DXR10BAP | Adjustable Photocells | 3V Battery | Range 10m

Product Overview The DXR10BAP is a pair of adjustable, surface-mounted, synchronized, and swivelling infrared-beam photocells designed for gate automation systems. These photocells operate on a 3V battery and are capable of a range of up to 10 meters. With a protection rating of IP54, the DXR10BAP photocells are built to withstand various environmental conditions, ensuring reliable performance for your gate automation needs. Key Features Adjustable and synchronized infrared-beam photocells Surface-mounted for easy installation Swivelling design for flexible alignment Operates on 3V battery with additional support for 12-24V AC/DC 10-meter range for effective coverage IP54 protection rating for durability Product Description The DXR10BAP photocells are engineered to enhance the safety and functionality of your gate automation system. These photocells feature an adjustable and synchronized infrared-beam design, providing reliable detection and safety performance. The swivelling capability allows for flexible alignment, ensuring optimal functionality in various installation scenarios. Designed for surface mounting, the DXR10BAP photocells are easy to install and integrate seamlessly with your existing gate automation setup. They operate efficiently on a 3V battery and can also be powered by 12-24V AC/DC, offering versatile power supply options. With a range of up to 10 meters, these photocells provide ample coverage for most residential and commercial gate installations. Rated IP54, the DXR10BAP photocells are protected against dust and water splashes, making them suitable for outdoor use in different environmental conditions. The robust construction ensures long-lasting performance, contributing to the reliability and safety of your gate automation system. Technical Specifications Product Code: DXR10BAP Range: 10 meters Power Supply Voltage: 12V AC, 12V DC, 24V AC, 24V DC, Battery Protection Rating: IP54 Fitting: Surface-mounted Dimensions (Model 806TF-0030): 46mm (B) x 108mm (H) x 37mm (P) Dimensions (Model 806TF-0040): 52mm (B) x 145mm (H) x 39mm (P) Dimensions (Model 806TF-0050): 52mm (B) x 145mm (H) x 39mm (P) Dimensions (Model 806TF-0060): 46mm (B) x 108mm (H) x 37mm (P) Installation and Safety Please ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.