NICE B-FAB5024-DKIT Underground Automation Kit

Product Overview The B-FAB5024-DKIT is a complete underground swing gate automation kit designed for heavy-duty residential and multi-residential applications. Supporting gates up to 5m in width or 900kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control of larger gate installations. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 5m width or 900kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Semi-intensive duty cycle (45 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration LCD display control panel Specifications ParameterB-FAB5024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 7 Power Rating (W) 170 Max Gate Weight per Leaf (kg) 900 Max Gate Length per Leaf (m) 5 Motor Speed (rpm) 0.8 Torque (Nm) 400 Working Cycle (cycles/hour) 45 Gate Speed 24 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 13.3 Foundation Box Weight (kg) 20.3 Foundation Box BFABBOX (painted) / BFABBOXI (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x BFAB5024 24V underground motors 2x BFABBOX foundation boxes 1x MC824H control panel with BlueBUS and LCD display 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.  

NICE L-FAB4024-DKIT | Underground Twin Gate Kit | Max Leaf 4m / 650Kg | 24V

Product Overview The L-FAB4024-DKIT is a complete underground swing gate automation kit designed for residential and multi-residential applications. Supporting gates up to 4m in width or 650kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 4m width or 650kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Intensive duty cycle (60 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration Specifications ParameterL-FAB4024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 5 Power Rating (W) 120 Max Gate Weight per Leaf (kg) 650 Max Gate Length per Leaf (m) 4 Motor Speed (rpm) 1 Torque (Nm) 300 Working Cycle (cycles/hour) 60 Gate Speed 18 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 12.5 Foundation Box BFABBOX4 (painted) / BFABBOX4I (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x LFAB4024 24V underground motors 2x BFABBOX4 foundation boxes 1x MC824H control panel with BlueBUS 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE L-FAB4024HS-DKIT | Underground Gate Kit | Max Leaf 4m / 400Kg | 24V

Product Overview The L-FAB4024HS-DKIT is a complete underground swing gate automation kit designed for intensive use applications. Supporting gates up to 4m in width or 400kg per leaf, this hi-speed system delivers 90° opening in approximately 6 seconds. The concealed underground installation provides optimal aesthetics while maintaining robust performance with IP67 protection. Key Features 24V DC motor with 230V AC power supply Hi-speed operation - 6 seconds for 90° opening Underground concealed installation Intensive use duty cycle (50 cycles/hour) IP67 waterproof protection Magnetic encoder for precise positioning Mechanical limit switches BlueBUS technology compatibility Manual release from inside and outside Built-in obstacle detection Battery backup ready Solar power compatible Specifications ParameterL-FAB4024HS-DKIT Max Gate Weight per Leaf (kg) 400 Max Gate Length per Leaf (m) 4 Power Supply 230V AC - 50/60Hz Motor Voltage 24V DC Motor Power (W) 170 Current Draw (A) 7 Speed (rpm) 3 Torque (Nm) 200 Opening Time (90°) 6 seconds Duty Cycle 50 cycles/hour (intensive) Protection Class IP67 Operating Temperature (°C) -20 to +55 Motor Dimensions (mm) 375 x 225 x 110h Foundation Box Dimensions (mm) 400 x 325 x 152h Motor Weight (kg) 12.5 Foundation Box Weight (kg) 14.4 Opening Angle 110° standard, 360° optional Accessories Kit includes: 2x NICE LFAB4024HS 24V swing gate motors 2x NICE LFABBOX4 foundation boxes 2x NICE ON2E two-button transmitters 1x NICE MC824H control panel 1x NICE EPMB pair of photocells 1x NICE OXI receiver 2x NICE MEA3 release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

GIBIDI GROUND KIT | Underground Electromechanical Twin Kit for Leaf up to 3.5m

Product Overview GROUND KIT - Underground Electromechanical Twin Kit for Leaf up to 3.5 meters is available in both 230Vac and 24Vdc versions. Designed for swinging gates of medium dimensions and weight, it is suitable for both residential and intensive use. Key Features Easy to install with a self-supporting foundation box Silent and fast operation, opening in just 12 seconds Adjustable opening speed in the 24Vdc version Robust construction with steel and bronze-aluminium Adjustable anti-crushing sensitivity for enhanced safety Compliant with EN12453 safety standards Painted reduction gear for protection against atmospheric and environmental agents Product Description EASY TO INSTALL Thanks to the special self-supporting foundation box. Ambidextrous motor and pre-assembled accessories. SILENT AND FAST Only 12 seconds to open the gate! Extremely silent, due to the materials used and tidy finishing of the gears. In the 24Vdc version, it is possible to adjust the opening speed. TECHNOLOGICAL AND SAFE GROUND is built entirely in steel and bronze-aluminium, robust and reliable over time. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity to enhance safety, in compliance with EN12453 standards. The unlocking key has a European profile. A COMPLETE AND RELIABLE RANGE GROUND meets all aesthetic needs of your gate and remains reliable over time, thanks to the completely painted reduction gear, protecting it from atmospheric and environmental agents. Specifications FeatureGROUND610GROUND624 Type of use Residential Heavy Duty Frequency of use 30% Heavy Duty Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 400W 150W Protection degree IP67 IP67 Shaft rotation speed 7°/s 7°/s Max torque 530 Nm 320 Nm Adjustable force Electronic Electronic Adjustable speed Electronic ** Electronic ** Max leaf width 3.5 m * 3.5 m * Max door opening angle 110° 110° Operating temperature -20°C to +60°C -20°C to +60°C Encoder/limit switch LS are optional limit switches O/C LS are optional limit switches O/C Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 11.1 Kg 11.1 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ComponentKIT GROUND610KIT GROUND624 GROUND Operators 2 2 AJ49300 Self-supporting painted foundation box 2 2 AS06320 for 1 or 2 motors (F4) 1 Not Applicable AS06399 for 1 or 2 motors (BA 24) Not Applicable 1 AU02910 2 channels plug-in receiver board for control units 1 1 Complete flashing lamp device 1 1 AU03100 MAKO remote control 433Mhz 2 2 AU01940 wall mounted key selector model DCS100 1 1 AU02250 pair of DCF180 wall mounted photocells 1 1 AJ75800 gate warning plate 1 1 Note: The kit is supplied in multiple packages.

GIBIDI KIT FLOOR | Hydraulic Underground Automation Kit | 230Vac & 24Vdc, 150° & 180° Opening

Product Overview The KIT FLOOR Hydraulic Underground Automation Kit is a comprehensive solution for automating medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this kit is suitable for residential and heavy-duty use. The FLOOR operators are designed for easy installation, silent and fast operation, and provide advanced technological safety features. This kit includes all necessary components for a reliable and efficient gate automation system. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The KIT FLOOR Hydraulic Underground Automation Kit includes all necessary components for a comprehensive gate automation system. The FLOOR operators are engineered for easy installation, thanks to the special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. Kit Includes  K870/BFSLTK875/BFSLTK880/BFSLTK884/BFSLT FLOOR Operators Included Included Included Included AJ49000 Self-supporting painted foundation box Included Included Included Included AJ01400 Limit switches kit Included Not Applicable Included Not Applicable AS06320 For 1 or 2 motors (F4) Included Not Applicable Included Not Applicable AS06300 For 1 or 2 motors (BA 24) Not Applicable Included Not Applicable Included AU02910 2 channels plug-in receiver board for control units Included Included Included Included 70710 - 70724 Complete flashing lamp device Included Included Included Included AU03100 MAKO remote control 433Mhz Included Included Included Included AU01940 Wall mounted key selector model DCS100 Included Included Included Included PLEASE NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

BFT SUB BT Single Kit | Gates up to 2.5m Wide, 800kg | 24V Hydraulic Operator

Product Overview The BFT SUB BT Single Kit is a robust and compact solution designed for very intensive use in residential, industrial, and multi-residence applications. This 24V hydraulic operator kit can automate a swing gate leaf up to 2.5 meters wide and weighing up to 800kg. It includes everything needed for efficient and reliable gate automation. Key Features Range of 24V hydraulic operators for very intensive use Suitable for residential, industrial, and multi-residence applications Automates swing gate leaf up to 2.5m wide and 800kg in weight Compact and sturdy design Includes Thalia P control panel and receiver Comes with 2 Mitto radio transmitters Equipped with a pair of Compacta 180° photocells Includes a radio antenna Product Description Kit Components 1x SUB BT operator 1x Thalia P control panel & receiver 2x Mitto radio transmitters 1x Pair of Compacta 180° photocells 1x Radio antenna Specifications SpecificationDetails Power Supply 24V Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel Thalia Cycle Time 9° per sec Impact Reaction D-Track Protection Rating IP67 Temperature Range -20°C to 60°C Frequency of Use Very intensive Usage Instructions Install the BFT SUB BT Single Kit by following the provided manual. Ensure the gate leaf does not exceed the maximum width and weight specifications. Pair the Mitto transmitters with the Thalia P control panel for seamless operation. Use the Compacta 180° photocells to enhance safety and prevent accidents. The radio antenna ensures reliable signal transmission for remote operation. Dimensions The components of the BFT SUB BT Single Kit are compact and designed for easy installation and integration with existing gate structures. Safety and Maintenance Regularly check the hydraulic operator and control panel for optimal performance. Ensure the photocells are clean and unobstructed. Replace the batteries in the Mitto transmitters as needed. The IP67 protection rating ensures the components are protected against dust and water, but periodic maintenance is recommended to extend the lifespan of the kit.

BFT SUB BT Twin Kit | Gates up to 2.5m Wide, 800kg | 24V Hydraulic Operators

Product Overview The BFT SUB BT Twin Kit is a robust and compact solution designed for very intensive use in residential, industrial, and multi-residence applications. This 24V hydraulic operator kit can automate swing gate leaves up to 2.5 meters wide and weighing up to 800kg. It includes everything needed for efficient and reliable gate automation. Key Features Range of 24V hydraulic operators for very intensive use Suitable for residential, industrial, and multi-residence applications Automates swing gate leaves up to 2.5m wide and 800kg in weight Compact and sturdy design Includes Thalia P control panel and receiver Comes with 2 Mitto radio transmitters Equipped with a pair of Compacta 180° photocells Includes a radio antenna Product Description Kit Components 2x SUB BT operators 1x Thalia P control panel & receiver 2x Mitto radio transmitters 1x Pair of Compacta 180° photocells 1x Radio antenna Specifications SpecificationDetails Power Supply 24V Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel Thalia Cycle Time 9° per sec Impact Reaction D-Track Protection Rating IP67 Temperature Range -20°C to 60°C Frequency of Use Very intensive Usage Instructions Install the BFT SUB BT Twin Kit by following the provided manual. Ensure the gate leaves do not exceed the maximum width and weight specifications. Pair the Mitto transmitters with the Thalia P control panel for seamless operation. Use the Compacta 180° photocells to enhance safety and prevent accidents. The radio antenna ensures reliable signal transmission for remote operation. Dimensions The components of the BFT SUB BT Twin Kit are compact and designed for easy installation and integration with existing gate structures. Safety and Maintenance Regularly check the hydraulic operators and control panel for optimal performance. Ensure the photocells are clean and unobstructed. Replace the batteries in the Mitto transmitters as needed. The IP67 protection rating ensures the components are protected against dust and water, but periodic maintenance is recommended to extend the lifespan of the kit.

KEY AUTOMATION UNDER KIT | Underground Swing Gates Kit | For Gates up to 3.5m (24V)

Product Overview The UNDER KIT for swing gates with leaves up to 3.5 meters (24V) offers an efficient and concealed solution for gate automation. This underground kit includes two foundation boxes, ensuring robust installation and protection of mechanical parts from external debris. The water-resistant SUB remote control, along with the 14A control board, provides the possibility of adding up to 20 additional LED lights for economical and automatic night illumination. Programming and data management are simplified with the KUBE PRO wireless module. Key Features Without encoder Adjustable speed and slowdown functions Mechanical parts well protected from external debris Water-resistant SUB remote control included 14A control board with support for up to 20 additional LED lights Simple and intuitive programming with KUBE PRO wireless module Product Description Operator Specifications ModelTorque [Nm]Working Cycle [%]Opening Time at 90° [sec]Control BoardPower [Vdc]Consumption [A]Absorbed Power [W]Protection DegreeDimensions [mm]Weight [kg]Working Temperature [°C]Leaf Maximum Weight [kg] UND24 250 80 18-25* 14AB2 24 5 120 IP67 412 x 160 x 346 10.1 -20 + 55 600 Kit Includes 2x UND24 Operators ECLIPSE 14AB2 Control Board RX4K Receiver FT33 Photocells SUB44WR Remote KUBE Remote Control Module 2x Foundation Boxes The Kit requires a KUBE PRO to program for the first time. The Kube PRO can then be removed and swapped for a KUBE that allows the gates and lights to be operated from a phone. The lights will also come on during each operation. Link to KUBE PRO is HERE. Dimensions Dimensions (L - D - H): 412 x 160 x 346 mm Usage Limits The values shown can be significantly reduced due to the shape, height of the gate, and the presence of strong winds.  

GENIUS AUTOMATION Roller Kit for Swing Gates | 3m Gates | 230V and 24V

Product Overview The Roller kit is designed for swing gates up to 3 meters in length and 500 kilograms in weight per leaf. This electro-mechanical underground gear motor is built for reliability and efficiency. It features a patented lever-operated release with a lock, which can be activated from both inside and outside the property. The standard opening angle is up to 110°, with accessory options available for 140° and 180°. Key Features Electro-mechanical underground gear motor for swing gates Patented lever-operated release with lock, accessible from inside and outside Standard opening angle of up to 110°, with options for 140° and 180° Suitable for gate leafs up to 3m and 500kg per leaf Available in 230V and 24V versions Product Description The Roller Kit for Swing Gates offers a robust and efficient solution for automating swing gates up to 3 meters in length and 500 kilograms per leaf. This kit includes an electro-mechanical underground gear motor designed for continuous use, ensuring reliable operation even in demanding environments. The patented lever-operated release with lock allows for easy access from both inside and outside the property, enhancing convenience and security. With a standard opening angle of up to 110° and optional accessories for 140° and 180° openings, this kit provides flexibility to suit various installation requirements. Available in both 230V and 24V versions, the Roller Kit caters to different power supply needs. Each kit includes essential components such as foundation boxes, manual lever releases, control boards, photocells, and transmitters, ensuring a comprehensive solution for swing gate automation. The IP67 protection class guarantees durability and resistance to harsh weather conditions, making it suitable for both residential and commercial applications. Specifications FeatureRollerRoller 24 Power supply voltage (Vac) 230Vac 230Vac Electric motor voltage 230Vac 24Vdc Power (W) 380 70 Capacitor (uF) 12.5 - Max torque (Nm) 330 300 Leaf opening time at 90° (sec) 18 (110°/180°) - 10.5 (140°) 18 (110°/180°) - 10.5 (140°) Max leaf length (m) 3.5 (110°) - 3 (180°) - 2 (140°) 3.5 (110°) - 3 (180°) - 2 (140°) Indicative hourly cycles at 20°C ≥30 (110°/180°) ≥50 (140°) ≥100 (110°/180°) ≥170 (140°) Operator weight (kg) 26.5 26.5 Protection class IP67 IP67 Kit Includes KitIncludes GROLLERKIT (230V Double Kit) 2x Electromechanical operator 2x Foundation box 2x Stops 2x Manual lever release 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLERKITS (230V Single Kit) 1x Electromechanical operator 1x Foundation box 1x Stops 1x Manual lever release 1x Brain 592 control board 1x Control board housing 1x Pair of vega photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLER24KIT (24V Double Kit) 2x Electromechanical operator 2x Foundation box 2x Stops 2x Manual lever release 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 GROLLER24KITS (24V Single Kit) 1x Electromechanical operator 1x Foundation box 1x Stops 1x Manual lever release 1x Brain 18 control board with housing 1x Pair of vega BUS photocells 1x Plug in receiver/decoder 868 SLH 2x Two-channel transmitter kilo 868 Installation Instructions Ensure the gate frame is securely mounted and the gate is properly aligned. Install the Roller kit according to the installation instructions provided. For gates over 2 meters, an electric lock is essential to ensure leaf locking. Connect the power supply and configure the operator settings as needed. Maintenance Regular maintenance will ensure the longevity and proper functioning of the Roller kit: Check all bolts and screws regularly to ensure they are tight and secure. Lubricate the moving parts every six months with light oil to maintain smooth operation. Inspect the operator for any signs of wear or damage, replacing parts as necessary. Product Details Product CodeDescription GROLLERKIT 230V Double Kit GROLLERKITS 230V Single Kit GROLLER24KIT 24V Double Kit GROLLER24KITS 24V Single Kit Dimensions Specific dimensions are available upon request or from the product specifications sheet.

NICE M-FAB3024HS-DKIT | High-Speed Underground Gate Kit | Max Leaf 3m / 300Kg | 24V

Product Overview The NICE M-FAB3024HS-DKIT is a state-of-the-art solution for automating swing gates with leaves up to 3 meters in length or weighing up to 300kg. Designed for intensive use, this 24V DC kit features a magnetic encoder for precise control and rapid opening, achieving a 90-degree opening in approximately 8 seconds. Key Features Rapid Operation: 90-degree opening in about 8 seconds Reliable and Resistant: Solid internal metal parts and new IP67 waterproof die-cast aluminum Foundation Box Total Freedom of Choice: Release from inside and outside with key-operated models or lever version Simple to Use: Mechanical stop system on closure with standard opening max. 110° and optional opening 360° Compatibility: Fully compatible with the previous Metro series Moonclever MC824H Control Unit Simple programming with a single key Automatic memorization of limit switches with self-learning function Automatic fault diagnostics Programming of pause time Pedestrian pass door function Deceleration on opening and closing Dual technology obstacle detection Operation during power failure with optional batteries (PS324) housed inside the gear motor Provision for connecting latest generation resistive sensitive edges Kit Includes 2 x NICE MFAB3024HS 24V Motors 2 x NICE MFABBOX Foundation Boxes 2 x NICE ON2E 2 Button Transmitters 1 x NICE MC824H Control Panel 1 x NICE EPMB Pair of Photocells 1 x NICE OXI 4 Channel Receiver 2 x NICE MEA3 Release Mechanisms Technical Specifications SpecificationDetails Max length per gate 3000mm Installation Underground Motor voltage 24V Max weight per gate 300kg Max opening angle 110 degrees Locking method Mechanically locking motor Motor type Electromechanical Gate speed 8 seconds for 90 degrees Duty cycle Intensive Obstacle detection Built-in Mains power supply 230V Category Swing Gate Kit Why Choose the M-FAB3024HS-DKIT? The M-FAB3024HS-DKIT provides a comprehensive solution for fast and reliable swing gate automation. With easy installation, robust design, and advanced control features, it ensures your gates operate smoothly and efficiently.

FAAC Underground hydraulic operator double kit S800 SB KIT

2 Year guarantee

FAAC Underground hydraulic operator single kit S800 SB KIT S

2 Year guarantee

FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty

Product Overview The FAAC 770 24V UK is a high-performance underground electro-mechanical operator double kit, designed for heavy-duty gate automation. This kit is ideal for aluminum gate installations, providing robust and reliable operation for residential and commercial applications. The FAAC 770 24V UK kit includes all necessary components for a complete and efficient installation. Key Features Heavy duty automation suitable for aluminum gates. 24V underground electro-mechanical operator. Includes two motors and two foundation boxes. Comes with a control board and control board housing. Pair of photocells for enhanced safety. Plug-in receiver/decoder for easy integration. Two 2-channel remote transmitters for convenient control. 2-year guarantee for peace of mind. Product Description FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty The FAAC 770 24V UK kit is a comprehensive solution for automating aluminum gates with underground electro-mechanical operators. This heavy-duty kit ensures reliable and efficient operation, making it suitable for both residential and commercial gate installations. The 24V system provides smooth and powerful performance, while the included components ensure a complete and hassle-free setup. This kit includes two motors and two foundation boxes, ensuring a secure and stable installation for your gates. The control board and control board housing provide centralized control and easy access for maintenance and adjustments. The included pair of photocells enhances safety by detecting obstacles, preventing accidents during gate operation. The plug-in receiver/decoder allows for seamless integration with your existing gate automation system, while the two 2-channel remote transmitters offer convenient control of your gates from a distance. The FAAC 770 24V UK kit is designed to deliver reliable performance and durability, backed by a 2-year guarantee for added assurance. Kit Components 2 x Motors: Underground electro-mechanical motors for robust operation. 2 x Foundation Boxes: Secure foundation boxes for stable installation. 1 x Control Board: Centralized control unit for efficient management. 1 x Control Board Housing: Protective housing for the control board. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x Plug-in Receiver/Decoder: For easy integration with automation systems. 2 x 2-Channel Remote Transmitters: Remote controls for convenient operation. Technical Specifications SpecificationDetails Power Supply 24V Application Aluminum Gates Motor Type Electro-Mechanical Installation Type Underground Guarantee 2 Years The FAAC 770 24V UK kit provides a reliable and efficient solution for automating your aluminum gates, ensuring smooth and secure operation with advanced features and robust components.

FAAC 770 24V KIT S | Underground Electro-Mechanical Operator Single Kit | Heavy Duty

Product Overview The FAAC 770 24V KIT S is a high-performance underground electro-mechanical operator single kit, designed for heavy-duty gate automation. This kit is renowned for FAAC's reliability and is suitable for residential and commercial applications. The FAAC 770 24V KIT S includes all essential components for a complete and efficient gate automation installation. Key Features Heavy duty electro-mechanical operation for robust performance. 24V underground operator for efficient gate automation. FAAC reliability ensuring long-lasting operation. Includes motor, foundation box, and control board. Comes with control board housing for protection. Pair of photocells for enhanced safety. Plug-in receiver/decoder for seamless integration. Two 2-channel remote transmitters for convenient control. 2-year guarantee for peace of mind. Product Description FAAC 770 24V KIT S | Underground Electro-Mechanical Operator Single Kit | Heavy Duty The FAAC 770 24V KIT S is an advanced underground electro-mechanical operator single kit designed to provide reliable and efficient automation for gates. This heavy-duty kit is perfect for both residential and commercial installations, offering the renowned reliability of FAAC products. The 24V system ensures smooth and powerful performance, making it an excellent choice for robust gate automation. This comprehensive kit includes a motor, foundation box, control board, and control board housing, ensuring you have all the necessary components for a successful installation. The included pair of photocells enhances safety by detecting obstacles, preventing accidents during gate operation. The plug-in receiver/decoder allows for seamless integration with your existing gate automation system, while the two 2-channel remote transmitters offer convenient control of your gates from a distance. Backed by a 2-year guarantee, the FAAC 770 24V KIT S provides reliable performance and peace of mind. Kit Components 1 x Motor: Underground electro-mechanical motor for robust operation. 1 x Foundation Box: Secure foundation box for stable installation. 1 x Control Board: Centralized control unit for efficient management. 1 x Control Board Housing: Protective housing for the control board. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x Plug-in Receiver/Decoder: For easy integration with automation systems. 2 x 2-Channel Remote Transmitters: Remote controls for convenient operation. Technical Specifications SpecificationDetails Power Supply 24V Operation Electro-Mechanical Application Residential and Commercial Gates Installation Type Underground Guarantee 2 Years The FAAC 770 24V KIT S is a reliable and efficient solution for automating your gates, ensuring smooth and secure operation with advanced features and robust components.