ROGER TECHNOLOGY SL/180/R - Swing Gate Motor | Up to 1.8m | Without Arms | Reversible | 36V

Product Overview The SL/180/R Swing Gate Motor is designed for intensive use, supporting swing gates with leaves up to 1.8m. This low voltage electromechanical gear motor operates on 36V and features brushless IPU technology with an integrated digital encoder. The motor is reversible, locking in the open and closed positions while the power is on, but unlocking as the power goes off, providing an emergency free exit during power cuts. The motor comes without arms, which can be purchased separately (see Accessories for arms). Key Features 36V power supply Reversible motor Suitable for swing gates with leaves up to 1.8m Brushless IPU technology Integrated digital magnetic encoder (4096 PPR) Intensive use Specifications Power line supply 230V AC 50Hz Motor power supply 36V Power rating 200W Frequency of use Intensive use Torque 150 N m Operating temperature -20 to +55°C Protection level IP44 Reductor Type Reversible Manoeuvre speed 0.6 - 6.6 Rpm Opening time 6-30 s Limit switch Mechanical stop on opening and closing only with LT341 accessory Recommended digital controllers F70/IPU36/BOX, F70/IPU36/BOX/SL Encoder Digital magnetic encoder SENSORED, 4096 PPR Batteries recovery 3 external batteries 12V DC 4.5 Amp/h (on external box) - optional Operating cycles per day 400000 (opening/closing - 24 hours no stop) Maximum dimension product (L x W x H) 492 x 102 x 144.5 mm Accessories KT250 KT218 LT340 - Arms short for articulated SLED series LT341 - Slide arm lever for articulated SLED series

FADINI APROLI 280 BATT | Oil-Hydraulic Operator for Swing Gates

Product Overview The FADINI APROLI 280 BATT is an oil-hydraulic operator designed for swinging gates with an articulated arm, suitable for both residential and commercial applications. This operator offers a powerful yet quiet action, making it ideal for installations on gates with large pillars. Key Features Discreet installation for gates with large pillars Oil-hydraulic operation for powerful and reliable performance Available in various versions: reversible non-locking, locking by hydraulic valve in opening and closing, with flow regulator Cataphoresis treated, pressure cast aluminum articulated arm to prevent shearing Manual override accessible by key Anti-crush safety ensured by integrated by-pass valves Quiet operation Easy installation Tested and certified for safety and performance Product Description The FADINI APROLI 280 BATT oil-hydraulic operator is designed to automate swing gates efficiently and quietly. It is particularly suitable for gates with large pillars, providing a discreet and powerful solution. The operator features an articulated arm that is pressure cast from aluminum and treated with cataphoresis to prevent shearing, ensuring long-lasting durability. This operator is available in multiple versions to meet various installation needs, including reversible non-locking, locking by hydraulic valve in both opening and closing, and with a flow regulator for precise control. The anti-crush safety feature is ensured by the by-pass valves incorporated in the operator, enhancing user safety. The APROLI 280 BATT is designed for easy installation and quiet operation, making it ideal for both residential and commercial settings. The manual override feature allows for manual operation in case of power failure, accessed easily by a key. Technical Data Power supply: 230 Vac, 50 Hz Absorbed power: 250 W Absorbed current: 1.2 A Power yield: 0.18 kW / 0.25 HP Torque: 250-400 Nm Shaft rotation: 130° Opening/closing time: 23 s Working temperature: -20°C to +80°C Grade of protection: IP67 Oil type: 708L Weight including arm: 19 kg Frequency of use: Semi-intensive Note: Each code includes an oil-hydraulic operator complete with cover, extendable articulated arm (where indicated), fixing bracket, and two keys to access the release device. For hydraulic non-locking (reversible) models, an electric lock is required.

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

CAME FTX20DLS - 801MB-0120 | Articulated Arm Motor 24V | For Gates Up to 2m - Slave Motor

Product Overview The CAME FTX20DLS - 801MB-0120 is a robust articulated arm motor designed for swing gates up to 2 meters in length and 250 kg in weight. This slave motor operates on 24V and offers reliable and efficient performance for both residential and commercial applications. Key Features 24V Electromechanical Motor: Ensures smooth and reliable operation. Max Gate Weight: Suitable for gates up to 250 kg. Max Gate Length: Handles gates up to 2 meters in length. Adjustable Speed: Allows for customized gate movement speed. Intensive Duty Cycle: Designed for frequent use without overheating. Max Opening Angle: Capable of opening gates up to 110 degrees. Mechanically Locking Motor: Provides secure locking when the gate is closed. Protection Rating: IP 44, suitable for outdoor use. Product Description The CAME FTX20DLS articulated arm motor is engineered for durability and high performance, making it an excellent choice for swing gates up to 2 meters in length and weighing up to 250 kg. This motor is ideal for both residential and commercial settings where reliable and secure gate operation is essential. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. As a slave motor, it complements the master unit to provide synchronized and efficient gate operation. Designed for intensive use, the FTX20DLS can handle frequent operations without overheating, making it suitable for busy environments. The motor's mechanically locking feature ensures that the gate remains securely closed when not in operation, enhancing security. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 250 kg Max Length Per Gate: 2000 mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: Intensive Upgrade your gate automation with the reliable and efficient CAME FTX20DLS articulated arm motor. Perfect for ensuring secure and smooth gate movement in various settings.

CAME FTX20DLC - 801MB-0110 | Articulated Arm Motor 24V with Control Panel | For Gates Up to 2m

Product Overview The CAME FTX20DLC - 801MB-0110 is a robust articulated arm motor designed for swing gates up to 2 meters in length and 250 kg in weight. This motor includes a control panel and operates on 24V, offering reliable and efficient performance for both residential and commercial applications. Key Features 24V Electromechanical Motor: Ensures smooth and reliable operation. Max Gate Weight: Suitable for gates up to 250 kg. Max Gate Length: Handles gates up to 2 meters in length. Control Panel Included: Integrated control panel for easy setup and operation. Adjustable Speed: Allows for customized gate movement speed. Intensive Duty Cycle: Designed for frequent use without overheating. Max Opening Angle: Capable of opening gates up to 110 degrees. Mechanically Locking Motor: Provides secure locking when the gate is closed. Protection Rating: IP 44, suitable for outdoor use. Product Description The CAME FTX20DLC articulated arm motor is engineered for durability and high performance, making it an excellent choice for swing gates up to 2 meters in length and weighing up to 250 kg. This motor is ideal for both residential and commercial settings where reliable and secure gate operation is essential. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. The included control panel simplifies installation and operation, allowing for easy customization of gate settings, including adjustable speed and opening angles. Designed for intensive use, the FTX20DLC can handle frequent operations without overheating, making it suitable for busy environments. The motor's mechanically locking feature ensures that the gate remains securely closed when not in operation, enhancing security. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 250 kg Max Length Per Gate: 2000 mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: Intensive Upgrade your gate automation with the reliable and efficient CAME FTX20DLC articulated arm motor, complete with a control panel for easy setup and operation. Perfect for ensuring secure and smooth gate movement in various settings.

CAME FTL20DGC | 24V Articulated Arm Motor with Control Panel for Swing Gates up to 2m - 801MB-0080

Product Overview The CAME FTL20DGC 24V Articulated Arm Motor with Control Panel is an ideal solution for swing gates, specifically designed for residential and condominium applications. This motor provides intensive use capabilities, ensuring reliable performance for gates up to 2m in width and 200kg in weight. Replace your broken or damaged gate motor with this direct replacement, which comes brand new and genuine from the manufacturer in the UK. Key Features Gate Type: Swing Gate Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 Specifications Motor Voltage: 24V Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Max Opening Angle: 110 Degrees Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 What's in the Box 1x CAME FTL20DGC 24V Motor with Control Panel - 801MB-0080

CAME FTX20DGC 24V Articulated Arm Motor for Swing Gates up to 2m - 801MB-0070

CAME FTX20DGC 24V Articulated Arm Motor for Swing Gates up to 2m Looking to replace a broken CAME FTX20DGC - 801MB-0070? This item is a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Product Features Gate Type: Swing Gate Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What’s Included 1x CAME FTX20DGC 24v Motor - 801MB-0070 Ensure your gate operates smoothly and reliably with the CAME FTX20DGC articulated arm motor. Perfect for residential and condominium applications, this motor is designed to handle intensive use and provides reliable performance for swing gates up to 2m in width and 200kg in weight. Order now for a quick and efficient replacement!

CAME FTX-S KIT | Artic Arm Kit 24V for Single Swing Gate up to 2m, 200kg

Product Overview The CAME FTX-S Kit is a complete solution for residential or condominium applications, designed for single swing gates with small and medium-sized pillars. It accommodates gates up to 2m in width or 200kg per leaf, providing reliable and efficient automation. Key Features Battery Backup Available: Ensures gate operation during mains power failures, enhancing accessibility. Slow Down on Open and Close: Adjustable speed settings for smooth and personalized gate operation. Designed for Large Pillars: The articulated arm design allows easy installation on large square pillars without additional bracket modifications. Intensive Use: Ideal for shared entrance gates, designed for frequent daily operations. Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles. Quick & Easy Installation: Minimal excavation required, making it simple to install on existing hinged swing gates. Solar Ready: Can be powered by solar energy, reducing installation costs and environmental impact. CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app, available on the App Store and Google Play. CAME RIO Total Wireless Safety: No hard wiring needed between the control unit and safety accessories, speeding up installation time. Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What's in the Box? 1x CAME FTX20DLC 24v Motor with Control Panel - 801MB-0110 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of safety photocells 2x CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1x CAME TOP-A433N Antenna

CAME FTX-P KIT | Artic Arm Kit 24V for Pair of Swing Gates up to 2m, 200kg

Product Overview The CAME FTX-P Kit is a complete solution for residential or condominium applications, designed for swing gates with small and medium-sized pillars. It accommodates gates up to 2m in width or 200kg per leaf, providing reliable and efficient automation. Key Features Battery Backup Available: Ensures gate operation during mains power failures, enhancing accessibility. Slow Down on Open and Close: Adjustable speed settings for smooth and personalized gate operation. Designed for Large Pillars: The articulated arm design allows easy installation on large square pillars without additional bracket modifications. Intensive Use: Ideal for shared entrance gates, designed for frequent daily operations. Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles. Quick & Easy Installation: Minimal excavation required, making it simple to install on existing hinged swing gates. Solar Ready: Can be powered by solar energy, reducing installation costs and environmental impact. CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app, available on the App Store and Google Play. CAME RIO Total Wireless Safety: No hard wiring needed between the control unit and safety accessories, speeding up installation time. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What's in the Box? 1x CAME FTX20DLC 24v Motor with Control Panel - 801MB-0110 1x CAME FTX20DLS 24v Motor - 801MB-0120 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of safety photocells 2x CAME TOPD4RKS Four Channel Black Radio Remote's - 806TS-0122 1x CAME TOP-A433N Antenna

CAME Frog-PAV 230v Fast Kit | Pair of Swing Gates | Up to 1.3m Leaf, 300kg

Product Overview The CAME Frog-PAV Kit offers a comprehensive solution for residential or apartment block swing gates, accommodating gates up to 1.3m in width or 300kg per leaf. This fast version kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level. Key Features Ultimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards. Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point. Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width. 3 Year Warranty: Confidence in quality with a 3-year warranty on all CAME electrical components. Fast Motor: Ensures quick operation with a gate speed of 9 seconds for 90 degrees. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 300Kg Max Length Per Gate: 1300mm Above Or Underground: Underground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 9 seconds - 90° Duty Cycle: 30 Cycles/Hour What's in the Box? 2x CAME FROG-AV 230v Motors 2x CAME FROG-CFN Foundation Cases 2x CAME A4364 Release Mechanisms 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZA3P Control Panel 2x CAME TOPD4FKS Radio Remotes - 806TS-0102 1x CAME TOP-A433N Antenna 1x CAME AF43S Frequency Card

FAAC S800 ENC CBAC 230v Single Kit for Swing Gates - Hydraulic Operator

Product Overview The FAAC S800 ENC CBAC 230v Single Kit offers a reliable solution for automating residential and condominium swing gates. Designed for gates up to 2m in length and 800Kg in weight, this kit includes all necessary components for efficient gate operation. Key Features Hydraulic operator suitable for continuous use Integrated absolute magnetic encoder with bus technology Integrated positive stops for precise gate positioning Hybrid technology for versatile operation Service release device for manual operation in emergencies Easy handling and installation Kit Components 1 x 230Vdc hydraulic operator S800E CBAC with 100-degree opening 1 x Collar assembly for S800 1 x Underground foundation box 1 x E145 control board for comprehensive gate management 1 x Pair of photocells XP20B for enhanced safety 1 x Receiver XF868 SLH for remote operation convenience 2 x Two-channel transmitters 868 SLH for wireless control Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800Kg Motor Voltage: 230Vac Work Cycle: Continuous Applications The FAAC S800 ENC CBAC Single Kit is ideal for automating single swing gates in residential and condominium settings. Its robust construction and advanced features ensure reliable and safe gate operation, enhancing convenience and security for homeowners and residents.

FAAC S800 ENC CBAC 230v Double Kit for Swing Gates - Hydraulic Operator

Product Overview The FAAC S800 ENC CBAC 230v Double Kit provides a complete solution for automating residential and condominium swing gates. Designed for gates up to 2m in length and 800Kg in weight per leaf, this kit includes all necessary components for efficient gate operation. Key Features Hydraulic operators suitable for continuous use Integrated absolute magnetic encoder with bus technology Integrated positive stops for precise gate positioning Hybrid technology for versatile operation Service release device for manual operation in emergencies Easy handling and installation Kit Components 2 x 230Vdc hydraulic operators S800E CBAC with 100-degree opening 2 x Collar assemblies for S800 2 x Underground foundation boxes 1 x E145 control board for comprehensive gate management 1 x Pair of photocells XP20B for enhanced safety 1 x Receiver XF868 SLH for remote operation convenience 2 x Two-channel transmitters 868 SLH for wireless control Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800Kg per leaf Motor Voltage: 230Vac Work Cycle: Continuous Applications The FAAC S800 ENC CBAC Double Kit is ideal for automating double swing gates in residential and condominium settings. Its robust construction and advanced features ensure reliable and safe gate operation, enhancing convenience and security for homeowners and residents.

Faac S800 CBAC 230V Single Kit | Hydraulic Underground Operator | Max 2m, 800Kg

Product Overview The Faac S800 CBAC 230V Single Kit is a comprehensive solution for automating residential and condominium swing gates. This hydraulic underground operator is designed for gates with a maximum leaf length of 2 meters and a maximum weight of 800 kg, ensuring reliable and efficient operation. Key Features Suitable for residential and condominium swing gates Handles gate leaves up to 2 meters in length and 800 kg in weight Designed for continuous use Integrated absolute magnetic encoder with bus technology Integrated positive stops Hybrid technology for improved performance Service release device for ease of handling and installation IP67 protection rating for durability and resistance against environmental factors Kit Contents 1 x 230Vdc hydraulic operator S800 CBAC with 100-degree opening 1 x Collar assembly for S800 1 x Underground foundation box 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Product Description The Faac S800 CBAC 230V Single Kit is designed to provide a robust and efficient solution for automating swing gates. With its hydraulic underground operator, this kit ensures smooth and reliable operation for gates up to 2 meters in length and 800 kg in weight. The integrated absolute magnetic encoder with bus technology offers precise control and positioning. The kit includes all necessary components for a complete installation, including a hydraulic operator, collar assembly, underground foundation box, control board, photocells, receiver, and transmitters. The E145S control board with housing simplifies setup and programming, while the photocells and receiver enhance safety and functionality. The S800 CBAC operator features hybrid technology and integrated positive stops, ensuring reliable performance and ease of use. The service release device makes handling and installation straightforward, while the IP67 protection rating ensures durability in various environmental conditions. Specifications IP Rating 67 Max Gate Leaf Length 2.0m Max Gate Weight 800Kg Motor Voltage 230Vac Work Cycle Continuous Applications The Faac S800 CBAC 230V Single Kit is ideal for residential and condominium swing gate installations, providing reliable and efficient automation for gates with leaves up to 2 meters in length and 800 kg in weight. Its robust design and advanced features make it suitable for continuous use, ensuring long-lasting performance and security.

Faac S800 CBAC 230V Double Kit | Hydraulic Underground Operator | Max 2m, 800Kg

Product Overview The Faac S800 CBAC 230V Double Kit is a comprehensive solution for automating residential and condominium swing gates. This hydraulic underground operator is designed for gates with a maximum leaf length of 2 meters and a maximum weight of 800 kg, ensuring reliable and efficient operation. Key Features Suitable for residential and condominium swing gates Handles gate leaves up to 2 meters in length and 800 kg in weight Designed for continuous use Integrated absolute magnetic encoder with bus technology Integrated positive stops Hybrid technology for improved performance Service release device for ease of handling and installation IP67 protection rating for durability and resistance against environmental factors Kit Contents 2 x 230Vdc hydraulic operators S800 CBAC with 100-degree opening 2 x Collar assembly for S800 2 x Underground foundation boxes 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Product Description The Faac S800 CBAC 230V Double Kit is designed to provide a robust and efficient solution for automating swing gates. With its hydraulic underground operators, this kit ensures smooth and reliable operation for gates up to 2 meters in length and 800 kg in weight. The integrated absolute magnetic encoder with bus technology offers precise control and positioning. The kit includes all necessary components for a complete installation, including hydraulic operators, collar assemblies, underground foundation boxes, control board, photocells, receiver, and transmitters. The E145S control board with housing simplifies setup and programming, while the photocells and receiver enhance safety and functionality. The S800 CBAC operators feature hybrid technology and integrated positive stops, ensuring reliable performance and ease of use. The service release device makes handling and installation straightforward, while the IP67 protection rating ensures durability in various environmental conditions. Specifications IP Rating 67 Max Gate Leaf Length 2.0m Max Gate Weight 800Kg Motor Voltage 230Vac Work Cycle Continuous Applications The Faac S800 CBAC 230V Double Kit is ideal for residential and condominium swing gate installations, providing reliable and efficient automation for gates with leaves up to 2 meters in length and 800 kg in weight. Its robust design and advanced features make it suitable for continuous use, ensuring long-lasting performance and security.

BFT SUB GR Single Kit for Gates up to 1.8m | 180° Operation | Non-Locking with Slow Down (230V)

Product Overview The SUB GR Single Kit for Gates up to 1.8m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It automates swing gate leafs up to 1.8m wide and 800kg in weight, featuring 180° operation, hydraulic lock, and slowdown for both opening and closing. Key Features 230V Power Supply: Ensures reliable operation. Designed for Gates Up to 1.8m & 800kg: Suitable for medium-sized gate installations. Hydraulic Lock: Provides secure operation. Slowdown in Both Directions: Enhances safety during gate movement. RIGEL6 Control Panel: Offers advanced control and monitoring. Heavy Duty Foundation Box: Ensures stability and durability. Safety Photocells: Enhances safety during gate operation. Frequency of Use: Ideal for very intensive gate automation. Product Description The SUB GR Single Kit includes the BFT Sub GR 230V hydraulic underground operator, a heavy-duty foundation box for secure installation, a RIGEL6 control panel for comprehensive management, safety photocells for added security, Mitto RB 2 Button Transmitters for remote access, and an antenna for reliable communication. Specifications SpecificationSUB GR Single Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 15 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT Sub GR 230V Hydraulic Underground Operator 1x Heavy Duty Foundation Box 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details on the SUB GR Single Kit for Gates up to 1.8m or to make a purchase, please contact us or visit our website.

BFT SUB G Single Kit for Gates up to 1.8m | 180° Operation (230V)

Product Overview The SUB G Single Kit for Gates up to 1.8m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It automates swing gate leafs up to 1.8m wide and 800kg in weight, featuring 180° operation. Key Features 230V Power Supply: Ensures reliable operation. Designed for Gates Up to 1.8m & 800kg: Suitable for medium-sized gate installations. Hydraulic Lock: Provides secure locking mechanism. RIGEL6 Control Panel: Offers advanced control and monitoring. Heavy Duty Foundation Box: Ensures stability and durability. Safety Photocells: Enhances safety during gate operation. Frequency of Use: Ideal for very intensive gate automation. Product Description The SUB G Single Kit includes the BFT Sub G 230V hydraulic underground operator, a heavy-duty foundation box for secure installation, a RIGEL6 control panel for comprehensive management, safety photocells for added security, Mitto RB 2 Button Transmitters for remote access, and an antenna for reliable communication. Specifications SpecificationSUB G Single Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 33 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT Sub G 230V Hydraulic Underground Operator 1x Heavy Duty Foundation Box 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more information on the SUB G Single Kit for Gates up to 1.8m or to place an order, please contact us or visit our website.

BFT SUB R Single Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator (2024)

Product Overview The SUB R Single Kit for Gates up to 1.8m is a reliable 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence settings. It is capable of automating swing gate leafs up to 1.8m wide and 800kg in weight, featuring a hydraulic lock and dual slowdown for smooth operation. Key Features 230V Power Supply: Ensures robust performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for medium-sized gate installations. Hydraulic Lock: Provides secure gate closure. Slowdown in Both Directions: Enhances safety and control. RIGEL6 Control Panel: Offers advanced management capabilities. Heavy Duty Foundation Boxes: Ensure stable installation. Safety Photocells: Increase safety during gate operation. Frequency of Use: Designed for very intensive operations. Product Description The SUB R Single Kit includes the BFT Sub R 230V hydraulic underground operator, heavy-duty foundation boxes for secure installation, a RIGEL6 control panel for seamless integration and control, safety photocells for added safety measures, Mitto RB 2 Button Transmitters for remote access, and an antenna for reliable communication. Specifications SpecificationSUB R Single Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 14 sec + slowdown Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT Sub R 230V Hydraulic Underground Operator 1x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB R Single Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB Single Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator (2024)

Product Overview The SUB Single Kit for Gates up to 1.8m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It automates swing gate leafs up to 1.8m wide and 800kg in weight, equipped with a hydraulic lock for enhanced security. Key Features 230V Power Supply: Provides reliable operation. Suitable for Gates Up to 1.8m & 800kg: Perfect for medium-sized gate installations. Hydraulic Lock: Ensures secure gate closure. RIGEL6 Control Panel: Enables advanced control functionalities. Heavy Duty Foundation Boxes: Ensure stable installation. Safety Photocells: Enhance safety during gate operation. Frequency of Use: Designed for very intensive use. Product Description The SUB Single Kit includes the BFT Sub 230V hydraulic underground operator, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for added safety measures, and an antenna for communication. Specifications SpecificationSUB Single Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 24 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT Sub 230V Hydraulic Underground Operator 1x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more information or to purchase the SUB Single Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB GR Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator 180° Operation Non-Locking with Slow Down (2024)

Product Overview The SUB GR Twin Kit for Gates up to 1.8m is a powerful 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It accommodates swing gate leafs up to 1.8m wide and 800kg in weight, featuring 180° operation with non-locking capability and slowdown in both opening and closing. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for medium-sized gate installations. 180° Operation: Facilitates efficient swing gate automation. Non-Locking Mechanism: Requires a physical locking device for security. Slowdown in Both Directions: Enhances safety during gate operation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise gate movement. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB GR Twin Kit includes two 230V BFT Sub GR hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety measures, and an antenna for communication. Specifications SpecificationSUB GR Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 15 sec Operation 180° Impact Reaction Hydraulic Clutch Locking Requirement Physical locking device required Slowdown Feature Both directions Frequency of Use Very Intensive Kit Includes 2x BFT Sub GR 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB GR Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB G Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator 180° Operation

Product Overview The SUB G Twin Kit for Gates up to 1.8m is a robust 230V hydraulic underground operator designed for very intensive use in residential, industrial, or multi-residence environments. It features 180° operation, ideal for swing gate automation up to 1.8m wide and 800kg in weight. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Accommodates medium-sized gate installations. 180° Operation: Enables efficient swing gate automation. Hydraulic Lock: Provides enhanced security. Heavy Duty Foundation Boxes: Ensures stability during installation. RIGEL6 Control Panel: Offers advanced control functionalities. Hydraulic Clutch Impact Reaction: Ensures precise operation. Frequency of Use: Very Intensive - suitable for high-frequency operation. Product Description The SUB G Twin Kit includes two 230V BFT Sub G hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, safety photocells for enhanced safety measures, and an antenna for communication. Specifications SpecificationSUB G Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 33 sec Operation 180° Impact Reaction Hydraulic Clutch Locking Requirement Hydraulic lock Frequency of Use Very Intensive Kit Includes 2x BFT Sub G 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna For more details or to purchase the SUB G Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB R Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator with Slow Down

Product Overview The SUB R Twin Kit for Gates up to 1.8m offers a robust 230V hydraulic underground operator solution designed for very intensive use in residential, industrial, or multi-residence environments. It features slowdown functionality for both opening and closing, ensuring precise and controlled gate operation. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for various gate sizes and weights. Hydraulic Lock: Provides secure operation. Slowdown in Both Directions: Ensures smooth and controlled gate movement. Heavy Duty Foundation Boxes: Provides stable installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 14 seconds. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for frequent operation. Product Description The SUB R Twin Kit includes two 230V BFT Sub R hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, along with safety photocells and an antenna for enhanced safety and convenience. Specifications SpecificationSUB R Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 14 sec Impact Reaction Hydraulic Clutch Slowdown Feature Yes, in both directions Frequency of Use Very Intensive Kit Includes 2x BFT Sub R 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB R Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB Twin Kit for Gates up to 1.8m | 230V Hydraulic Underground Operator

Product Overview The SUB Twin Kit for Gates up to 1.8m offers a robust 230V hydraulic underground operator solution designed for very intensive use in residential, industrial, or multi-residence environments. Capable of automating swing gate leafs up to 1.8 meters wide and weighing up to 800kg, it features a hydraulic lock for secure operation. Key Features 230V Power Supply: Ensures reliable performance. Suitable for Gates Up to 1.8m & 800kg: Ideal for various gate sizes and weights. Heavy Duty Foundation Boxes: Provides stable installation. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Cycle Time: Opens through 90° in 24 seconds. Hydraulic Clutch Impact Reaction: Ensures precise operation. Very Intensive Use: Suitable for frequent operation. Product Description The SUB Twin Kit includes two 230V BFT Sub hydraulic underground operators, heavy-duty foundation boxes for stable installation, a RIGEL6 control panel for seamless integration and management, along with safety photocells and an antenna for enhanced safety and convenience. Specifications SpecificationSUB Twin Kit Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90°) 24 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 2x BFT Sub 230V Hydraulic Underground Operator 2x Heavy Duty Foundation Boxes 1x BFT RIGEL6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more details or to purchase the SUB Twin Kit for Gates up to 1.8m, please contact us or visit our website.

BFT SUB GR Fast Operation Hydraulic Underground Operator for Gates up to 1.8m | Non-Locking, Slow Down (230V)

Product Overview The SUB GR Fast Operation Hydraulic Underground Operator is a robust 230V system designed for very intensive use in residential, industrial, or multi-residence environments. It efficiently automates swing gate leafs up to 1.8 meters wide and weighing up to 800kg. Featuring a non-locking mechanism and built-in slowdown for both opening and closing, it ensures smooth and safe operation. Key Features 230V Power Supply: Provides reliable operation. Suitable for Gates Up to 1.8m & 800kg: Ideal for various applications. RIGEL6 Control Panel: Offers advanced control functionalities. Fast Operation: Opens to 180° efficiently. Non-Locking: Requires physical locking device. Hydraulic Clutch Impact Reaction: Ensures reliable operation. Slowdown Feature: Enhances safety during gate movement. Frequent Use: Very Intensive Product Description The SUB GR Fast Operation Hydraulic Underground Operator is equipped with a hydraulic clutch impact reaction system, providing precise control over gate movement. It includes a RIGEL6 control panel for seamless integration and management of gate operations in demanding environments. Specifications SpecificationSUB GR Hydraulic Operator Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 800kg Control Panel RIGEL6 Cycle Time (through 90 degrees) 33 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x SUB GR 230V Hydraulic Underground Operator 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For more information or to purchase the SUB GR Fast Operation Hydraulic Underground Operator, please contact us or visit our website.

BFT LUX 2B FC Hydraulic Motor Single Kit for Gates up to 2m with Internal Stop (230V) | Very Intensive Use

Product Overview The LUX 2B FC Hydraulic Motor Single Kit is a robust 230V hydraulic operator designed for very intensive use in residential, industrial, or multi-residence environments. It automates swing gate leafs up to 2 meters wide and weighing up to 300kg. Featuring internal stops and a hydraulic lock, the LUX 2B FC ensures secure operation and precise positioning. Key Features Suitable for Gates Up to 2m & 300kg: Ideal for intensive use applications. 230V Power Supply: Suitable for residential and industrial settings. RIGEL 6 Control Panel: Offers advanced control and management. Hydraulic Lock: Ensures gates remain securely closed. Internal Stops: Provides precise gate positioning in the closed position. Hydraulic Clutch Impact Reaction: Ensures safe and reliable operation. Very Intensive Use: Designed for environments requiring high gate automation reliability. Product Description The LUX 2B FC Hydraulic Motor Single Kit is designed to automate swing gates up to 2 meters wide and weighing up to 300kg with efficiency and durability. Operating on a 230V power supply, it includes the RIGEL 6 control panel, which integrates advanced features for seamless operation and control. This hydraulic gate motor is suitable for very intensive use, making it ideal for residential areas, industrial facilities, or multi-residence environments where reliability and security are paramount. The hydraulic lock ensures gates are securely closed, while the internal stops provide precise gate positioning in the closed position, enhancing safety and convenience. Specifications SpecificationLUX 2B FC Hydraulic Motor Power Supply 230V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel RIGEL 6 Cycle Time 17 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT LUX 2B FC 230V Hydraulic Motor 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT LUX 2B R Hydraulic Motor Single Kit for Gates up to 2m with Slow Down on Closing (230V) | Very Intensive Use

Product Overview The LUX 2B R Hydraulic Motor Single Kit is a robust 230V hydraulic operator designed for very intensive use, suitable for various residential, industrial, or multi-residence environments. This gate motor can automate swing gate leafs up to 2 meters wide and weighing up to 300kg. The LUX 2B R features a hydraulic lock and built-in hydraulic slowdown in closing for added safety and control. Key Features Suitable for Gates Up to 2m & 300kg: Designed for intensive use in diverse environments. 230V Power Supply: Suitable for residential and industrial applications. RIGEL 6 Control Panel: Provides advanced control and management capabilities. Hydraulic Lock: Ensures secure closure and prevents unauthorized access. Built-in Hydraulic Slowdown: Provides smooth and controlled gate closing. Hydraulic Clutch Impact Reaction: Ensures reliable and safe operation. Very Intensive Use: Ideal for environments requiring high gate automation reliability. Product Description The LUX 2B R Hydraulic Motor Single Kit is engineered to automate swing gates up to 2 meters wide and weighing up to 300kg with precision and durability. Operating on a 230V power supply, it includes the RIGEL 6 control panel, offering advanced features for seamless integration and operation. This hydraulic gate motor is designed for very intensive use, making it suitable for residential areas, industrial settings, or multi-residence environments where robust performance and safety are crucial. The hydraulic lock ensures gates remain securely closed, while the built-in hydraulic slowdown provides controlled closing for added safety and convenience. Specifications SpecificationLUX 2B R Hydraulic Motor Power Supply 230V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel RIGEL 6 Cycle Time 17 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT LUX 2B R 230V Hydraulic Motor 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT LUX 2B Hydraulic Motor Single Kit for Gates up to 2m (230V) | Very Intensive Use

Product Overview The LUX 2B Hydraulic Motor Single Kit is a robust 230V hydraulic operator designed for very intensive use, suitable for a wide range of residential, industrial, or multi-residence environments. This gate motor can automate swing gate leafs up to 2 meters wide and weighing up to 300kg. The LUX 2B features a hydraulic lock for enhanced security and reliability. Key Features Suitable for Gates Up to 2m & 300kg: Designed for intensive use in various environments. 230V Power Supply: Suitable for residential and industrial applications. RIGEL 6 Control Panel: Provides advanced control and management capabilities. Hydraulic Lock: Enhances security and prevents unauthorized access. Hydraulic Clutch Impact Reaction: Ensures smooth and safe gate operation. Very Intensive Use: Ideal for environments requiring high gate automation reliability. Product Description The LUX 2B Hydraulic Motor Single Kit is designed to automate swing gates up to 2 meters wide and weighing up to 300kg with precision and reliability. It operates on a 230V power supply and includes a RIGEL 6 control panel, offering advanced features for seamless integration and management. This hydraulic gate motor is engineered for very intensive use, making it suitable for residential areas, industrial settings, or multi-residence environments where durability and performance are paramount. The hydraulic lock ensures secure closure of gates, while the hydraulic clutch impact reaction provides smooth operation and extends the lifespan of the motor. Specifications SpecificationLUX 2B Hydraulic Motor Power Supply 230V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel RIGEL 6 Cycle Time 17 sec Impact Reaction Hydraulic Clutch Frequency of Use Very Intensive Kit Includes 1x BFT LUX 2B 230V Hydraulic Motor 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT safety photocells 1x BFT Antenna For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT ORO Hydraulic Motor Single Kit for Gates up to 1.8m (230V) | Compact Design

Product Overview The ORO Hydraulic Motor Single Kit is a compact 230V hydraulic operator designed for semi-intensive use, ideal for private residences and small apartment blocks. This gate motor is capable of automating swing gate leafs up to 1.8 meters wide and weighing up to 180kg. The ORO operator features a hydraulic clutch impact reaction and locks in the closed position. Key Features Suitable for Gates Up to 1.8m & 180kg: Designed for private residences and small apartment blocks. Compact Design: Space-efficient and aesthetically pleasing. 230V Power Supply: Suitable for residential applications. RIGEL 6 Control Panel: Provides reliable operation and control. Semi-Intensive Use: Ideal for moderate gate automation needs. Hydraulic Clutch Impact Reaction: Ensures smooth and safe gate operation. Locks in Closed Position: Enhances security for residential gates. Product Description The ORO Hydraulic Motor Single Kit is specifically designed for automating swing gates up to 1.8 meters wide and weighing up to 180kg. It is well-suited for private residences and small apartment blocks, providing a compact and efficient solution for gate automation. The operator operates on a 230V power supply and includes a RIGEL 6 control panel for easy management and operation. This hydraulic gate motor offers semi-intensive usage capabilities, making it suitable for moderate gate automation needs where reliability and performance are essential. The hydraulic clutch impact reaction ensures smooth and safe gate operation, while the locking mechanism in the closed position enhances security for residential applications. Specifications SpecificationORO Hydraulic Motor Power Supply 230V Gate Leaf Length Up to 1.8m Max Leaf Weight 180kg Control Panel RIGEL 6 Cycle Time 20 sec Impact Reaction Hydraulic Clutch Frequency of Use Semi-intensive Kit Includes 1x BFT ORO 230V Hydraulic Motor 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A20 | Standard Stroke Single Kit (24V) | Swing Gates Up to 2m & 300kg

Product Overview The Giuno Ultra BT A20 Standard Stroke Single Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The Giuno Ultra BT A20 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A20 Standard Stroke Single Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A20 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A20 Power Supply 24V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 1x BFT Giuno Ultra BT A20 24V Hydraulic Operator 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT LUX FC 2B | Hydraulic Motor Twin Kit for Gates Up to 2m with Internal Stop in Closed Position (230V)

Product Overview The LUX FC 2B Hydraulic Motor Twin Kit is a 230V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The LUX FC 2B is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features a hydraulic lock and internal stops in the closed position, ensuring smooth and secure operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. Hydraulic Lock: Provides secure locking mechanism. Internal Stop in Closed Position: Ensures gates close securely. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 17-second cycle time for efficient operation. Product Description The LUX FC 2B Hydraulic Motor Twin Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 230V hydraulic gate operator offers robust performance with a hydraulic lock and internal stops in the closed position. This ensures the gates close securely and reduces wear and tear on the system. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The LUX FC 2B is controlled by the RIGEL 6 control panel, providing precise and reliable management of the gate system. The operator's fast cycle time of 17 seconds ensures quick and efficient gate movement, enhancing convenience and security for users. Specifications SpecificationLUX FC 2B Power Supply 230V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel RIGEL 6 Cycle Time 17 sec Impact Reaction Hydraulic clutch Frequency of Use Very intensive Lux Twin Kit Product Range Lux ModelLeaf Length (m)Hydraulic LockingSlowdownInternal Stops Lux 2B Twin Kit 2m Yes No No Lux 2B FC Twin Kit 2m Yes No Yes Lux 2B R Twin Kit 2m Yes Yes No Lux GV S Twin Kit 3.5m No No No Lux GV R Twin Kit 3.5m No Yes No Lux GV 2B Twin Kit 3.5m Yes No No Kit Includes 2x BFT Lux 2B 230V Hydraulic Motors with Internal Stop in Closed Position 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT LUX 2B R | Hydraulic Motor Twin Kit for Gates Up to 2m with Slow Down on Closing (230V)

Product Overview The LUX 2B R Hydraulic Motor Twin Kit is a 230V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The LUX 2B R is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features a hydraulic lock and built-in hydraulic slowdown in closing, ensuring smooth and secure operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. Hydraulic Lock: Provides secure locking mechanism. Slow Down on Closing: Built-in hydraulic slowdown ensures smooth operation. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 17-second cycle time for efficient operation. Product Description The LUX 2B R Hydraulic Motor Twin Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 230V hydraulic gate operator offers robust performance with a hydraulic lock and built-in hydraulic slowdown in closing. This ensures the gates close smoothly and securely, reducing wear and tear on the system. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The LUX 2B R is controlled by the RIGEL 6 control panel, providing precise and reliable management of the gate system. The operator's fast cycle time of 17 seconds ensures quick and efficient gate movement, enhancing convenience and security for users. Specifications SpecificationLUX 2B R Power Supply 230V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel RIGEL 6 Cycle Time 17 sec Impact Reaction Hydraulic clutch Frequency of Use Very intensive Lux Twin Kit Product Range Lux ModelLeaf Length (m)Hydraulic LockingSlowdownInternal Stops Lux 2B Twin Kit 2m Yes No No Lux 2B FC Twin Kit 2m Yes No Yes Lux 2B R Twin Kit 2m Yes Yes No Lux GV S Twin Kit 3.5m No No No Lux GV R Twin Kit 3.5m No Yes No Lux GV 2B Twin Kit 3.5m Yes No No Kit Includes 2x BFT Lux 2B R 230V Hydraulic Motors 1x BFT RIGEL 6 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A20 | Standard Stroke Twin Kit (24V) | Swing Gates Up to 2m & 300kg

Product Overview The Giuno Ultra BT A20 Standard Stroke Twin Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The Giuno Ultra BT A20 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A20 Standard Stroke Twin Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A20 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A20 Power Supply 24V Gate Leaf Length 2m Max Leaf Weight 300kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 2x BFT Giuno Ultra BT A20 24V Hydraulic Operators 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

NICE OLTRE1824 24 Vdc Irreversible Swing Gate Motor for Post or Leaf Profile Installation

Product Overview The Oltre 1824 is an innovative and invisible motor designed for swing gates. Suitable for gates weighing up to 100 kg and with a leaf length of up to 1.8 meters, this 24 Vdc irreversible motor is perfect for installation on the post or leaf profile. It features a release lever for easy operation. Key Features Gate Type: Swing gate Max Length per Gate Leaf: 1.8m Installation Type: Post or leaf profile Motor Voltage: 24V Max Weight per Gate Leaf: 100kg Locking Method: Mechanically locking motor Protection Rating: IP67 Release Mechanism: Release lever Specifications SpecificationDetails Code OLTRE1824 Power Supply (VDC) 24 Absorption (A) 1 Power (W) 25 Speed (RPM) 1.5 Torque (NM) 150 Work Cycle (cycles/hour) 60 Degree of Protection (IP) 67 Operating Temperature (°C Min/Max) -0.4 Dimensions (mm) 305 x 145 x 346 h Weight (kg) 5.5 Benefits The OLTRE1824 motor offers reliable and efficient automation for swing gates. Its 24 Vdc operation ensures safety and durability, while the release lever allows for manual operation in case of power failure. The IP67 protection rating guarantees resistance to dust and water, making it suitable for various environmental conditions. Installation and Setup The OLTRE1824 is designed for easy installation on either the post or leaf profile of your swing gate. Detailed installation instructions are provided in the manual to ensure a smooth and trouble-free setup. Always follow safety guidelines for optimal performance.

BFT Giuno Ultra BT A20 Hydraulic Motor for Gates up to 2m (24v)

Product Overview The Giuno Ultra BT A20 Hydraulic Motor is a robust and reliable solution for operating swing gates up to 2 meters in length and 300 kilograms in weight. Designed for intensive use, this 24v hydraulic swing gate operator is ideal for both industrial and residential settings, as well as multi-resident sites. The Giuno Ultra BT A20 ensures smooth and efficient gate operation with its advanced technology and durable construction. This BFT swing gate opener features built-in obstacle detection through the exclusive D-Track Torque management system, providing enhanced safety and reliability. The operator is capable of handling very intensive usage, making it a perfect choice for high-traffic areas. Key Features Power Supply: 24v Gate Leaf Length: Up to 2 meters Maximum Leaf Weight: 300kg Control Panel: THALIA P Cycle Time: 14 seconds Impact Reaction: D-Track Torque management system Frequency of Use: Very intensive Opening Angle: 110 degrees Suitable For: Industrial, residential, and multi-resident sites Specifications Model: Giuno Ultra BT A20 Power Supply: 24v Gate Leaf Length: 2 meters Maximum Leaf Weight: 300kg Control Panel: THALIA P Cycle Time: 14 seconds Impact Reaction: D-Track Torque management system Frequency of Use: Very intensive Opening Angle: 110 degrees For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

NICE WALKYKIT 1024 WALKY1024KCE | Kit for Swing Gates up to 1.8m

Product Overview The WALKY1024-SKIT is a complete single leaf swing gate automation kit designed for pedestrian and lightweight residential gates. Supporting gates up to 1.8m in width or 180kg weight, this compact surface-mounted system features an articulated arm ideal for installations with space constraints or large pillars. The integrated control unit provides convenient all-in-one operation with IP44 protection. Key Features 24V DC motor with 230V AC power supply Surface-mounted installation with articulated arm Ultra-compact design for small posts (8cm minimum width) Semi-intensive use duty cycle (50 cycles/hour) IP44 protection class Integrated control unit Non-reversible motor with mechanical limit switch Manual release system Built-in obstacle detection Adjustable speed control on open and close Battery backup ready Solar power compatible BlueBUS technology compatibility Specifications ParameterWALKY1024-SKIT Max Gate Weight (kg) 180 Max Gate Length (m) 1.8 Power Supply 230V AC - 50/60Hz Motor Voltage 24V DC Motor Power (W) 120 Current Draw (A) 0.8 Speed (rpm) 1.5 - 2.2 Torque (Nm) 120 Opening Time (90°) 15 seconds (7 seconds optimal) Duty Cycle 50 cycles/hour (semi-intensive) Protection Class IP44 Operating Temperature (°C) -20 to +50 Dimensions (mm) 90 x 125 x 385h Weight (kg) 4.8 Opening Angle 110° standard Installation Type Surface mounted with articulated arm Accessories Kit includes: 1x NICE WL1024C 24V swing gate motor with integrated control panel 2x NICE ON3EBD two-button bidirectional transmitters 1x NICE OXIBD receiver 1x NICE WLT multifunction LED wall light 1x NICE EPMB pair of safety photocells Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

FAAC S800 ENC CBAC 100° | Hydraulic Underground Operator for Swing Gates | 230V

Product Overview The FAAC S800 ENC CBAC 100° is a high-performance hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This operator is engineered for continuous use and offers a range of advanced features for optimal performance and reliability. Key Features Hydraulic underground operator for swing gates Suitable for gates with single-leaf width up to 2 meters Continuous use frequency Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection) Integrated positive stops, eliminating the need for mechanical stops on the ground FAAC patented hybrid technology Service release device Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Max opening angle: 100 degrees Power input: 220W Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 2 Year Warranty Product Description The FAAC S800 ENC CBAC 100° is an advanced hydraulic operator designed for underground installation, providing an aesthetic and unobtrusive solution for swing gate automation. It is ideal for residential and condominium settings where gate leaves do not exceed 2 meters in width and 800kg in weight. High-Performance and Reliability This operator is built for continuous use, making it suitable for high-traffic applications. The integrated magnetic encoder with bus "2easy" ensures precise movement control and simplifies wiring with its non-polarized two-wire connection. Advanced Technology and Features The S800 ENC CBAC features FAAC's patented hybrid technology, combining hydraulic efficiency with electronic precision. Integrated positive stops eliminate the need for mechanical stops on the ground, reducing installation complexity and maintaining a clean appearance. Ease of Installation and Maintenance Designed with user convenience in mind, the S800 ENC CBAC includes integrated handles for easier installation and handling. The service release device allows for manual operation during maintenance or power outages. Additionally, the option to add a BUS XIB interface provides compatibility with NO BUS devices, enhancing versatility. Specifications Power input: 220W Gate type: Swing gate Max weight per gate: 800kg Max length per gate: 2000mm Installation type: Underground Max opening angle: 100 degrees Motor type: Hydraulic Power supply voltage: 230V Motor voltage: 230V Gate speed: 12 seconds for 90 degrees Duty cycle: Continuous Protection rating: IP67 Warranty: 2 years 2-Year Warranty The FAAC S800 ENC CBAC 100° comes with a 2-year warranty, ensuring peace of mind and reliable performance.

CASALI AUTOMATION Casalicentaur 230v U/G motor only

This product is actually a Genius Roller not Casali Centaur BUT will fit as a direct replacement The Genius Roller's fit the Casali Centaur U/G box as a direct replacement

BFT SUB G | Hydraulic Underground Operator for Gates up to 1.8m | 180° Operation, Hydraulic Lock (230v)

Product Overview The BFT SUB G is a 230v underground hydraulic operator designed for very intensive use. This high-performance operator can handle swing gate leafs up to 1.8 meters wide and weighing up to 800kg, making it suitable for residential, industrial, and multi-residence environments. The SUB G features 180° operation and a hydraulic lock for secure and efficient gate automation. Product Description The SUB G underground swing gate motor from BFT is engineered for reliability and efficiency. It is capable of automating gates up to 1.8 meters in length and is perfect for various settings requiring frequent use. The motor operates on a 230v power supply and is controlled by the RIGEL6 control panel. With a cycle time of 33 seconds through 90 degrees, the SUB G provides smooth and controlled gate movement. The hydraulic lock ensures secure operation, making it an ideal choice for intensive use in various environments. Key Features Hydraulic underground swing gate motor Handles gate leafs up to 1.8 meters wide and 800kg in weight 180° operation Hydraulic lock for secure operation Operates on 230v power supply Controlled by the RIGEL6 control panel Designed for very intensive use What's in the Box 1x BFT SUB G Hydraulic Underground Operator Installation instructions Specifications Power Supply: 230v Gate Leaf Length: Up to 1.8 meters Max Leaf Weight: 800kg Control Panel: RIGEL6 Cycle Time (through 90°): 33 sec Impact Reaction: Hydraulic clutch Frequency of Use: Very intensive

BFT SUB R | Hydraulic Underground Operator for Gates up to 1.8m | Slow Down and Fast Operation (230v)

Product Overview The BFT SUB R is a 230v underground hydraulic operator designed for very intensive use. This reliable operator can handle swing gate leafs up to 1.8 meters wide and weighing up to 800kg, making it ideal for residential, industrial, and multi-residence environments. The SUB R features a hydraulic lock and slowdown for both opening and closing, ensuring smooth and secure operation. Product Description The SUB R underground swing gate motor from BFT is engineered for high performance and durability. Capable of handling gates up to 1.8 meters in length, this motor is perfect for various settings requiring frequent use. The motor operates on a 230v power supply and is controlled by the RIGEL6 control panel, ensuring reliable and intensive operation. With a fast cycle time of 14 seconds through 90 degrees plus slowdown, the SUB R provides efficient and controlled gate movement. Key Features Hydraulic underground swing gate motor Handles gate leafs up to 1.8 meters wide and 800kg in weight Slowdown in both opening and closing directions Hydraulic lock Fast operation with 14-second cycle time Operates on 230v power supply Controlled by the RIGEL6 control panel Designed for very intensive use What's in the Box 1x BFT SUB R Hydraulic Underground Operator Installation instructions Specifications Power Supply: 230v Gate Leaf Length: Up to 1.8 meters Max Leaf Weight: 800kg Control Panel: RIGEL6 Cycle Time (through 90°): 14 sec + slowdown Impact Reaction: Hydraulic clutch Frequency of Use: Very intensive

BFT SUB | Hydraulic Underground Operator for Gates up to 1.8m | 230v Motor Only

Product Overview The BFT SUB is a hydraulic underground swing gate motor designed for intense use across various locations. This robust operator handles gate leafs up to 1.8 meters wide and weighing up to 800kg, making it an ideal choice for residential and commercial environments. Product Description The SUB underground swing gate motor from BFT is engineered for high performance and durability. Capable of pivoting a gate leaf 90 degrees in approximately 17 seconds, it features a slowdown phase to minimize impact, enhancing its suitability for residential use. The motor provides exceptional security with electric or hydraulic lock options depending on the model. The unit operates on a 230v power supply and is controlled by the RIGEL6 control panel, ensuring reliable and intensive operation. Key Features Hydraulic underground swing gate motor Handles gate leafs up to 1.8 meters wide and 800kg in weight 90-degree pivot in approximately 17 seconds Slowdown phase to reduce impact High-security electric or hydraulic lock options Operates on 230v power supply Controlled by the RIGEL6 control panel Designed for very intensive use What's in the Box 1x BFT SUB Hydraulic Underground Operator Installation instructions Specifications Power Supply: 230v Gate Leaf Length: Up to 1.8 meters Max Leaf Weight: 800kg Control Panel: RIGEL6 Cycle Time (through 90°): 24 sec Impact Reaction: Hydraulic clutch Frequency of Use: Very intensive

TOUSEK AUTOMATION Swing 225 AEB/29N Hydraulic Operator Kit S12706 | 230V | Up to 400kg, 1.8m Gates

Product Overview The Swing 225 AEB/29N Hydraulic Operator Kit S12706 is designed for swing gates up to 1.8 meters in width and 400 kilograms in weight. This powerful operator offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 225 AEB/29N Hydraulic Operator provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the operator is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The operator is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The operator supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 400 kg and a width of up to 1.8 m, this operator delivers reliable performance. The operator operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 400 kg and 1.8 m in width. What's in the Box 2 x Swing 225 AEB/29N Hydraulic Operators inclusive of installation material 1 x Control ST 50 1 x Radio receiver RS 868 2 channel 1 x Hand transmitter 4 channel RS 868 1 x Keyswitch AP/UP 2 T. Synthetic material with PHZ and 3 keys 1 x Light barrier of LS 40 Specifications Max Gate Wing Weight: 400 kg Max Gate Wing Width: 1.8 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 30%

TOUSEK AUTOMATION Swing 225AEB/29N Hydraulic Swing Gate Motor | 230V | Up to 400kg, 1.8m Gates

Product Overview The Swing 225AEB/29N Hydraulic Swing Gate Motor is designed for gates up to 1.8 meters in width and 400 kilograms in weight. This powerful motor offers high thrust, adjustable strength regulation, and maintenance-free operation, making it an ideal choice for robust and reliable gate automation. Product Description The Swing 225AEB/29N Hydraulic Swing Gate Motor provides a high thrust of up to 4500 N, making it suitable for heavy-duty gate applications. The strength of the motor is regulated through bypass valves, and it features a closed hydraulic system that eliminates the need for ventilation, ensuring maintenance-free operation. The motor is housed in an anodized, elegant aluminum case, offering both durability and a sleek appearance. It is designed to operate efficiently even in low temperatures, down to -25°C, and includes a covered emergency release for added convenience. The motor supports separate adjustable opening and closing strength via bypass valves, providing precise control over gate movements. With a maximum gate wing weight of 400 kg and a width of up to 1.8 m, this motor delivers reliable performance. The motor operates on a 230V power supply and features a piston stroke speed of 10 mm/sec, with a maximum piston stroke of 285 mm and an aperture angle of up to 110 degrees. Key Features High Thrust: Provides up to 4500 N of thrust for heavy-duty applications. Strength Regulation: Adjustable opening and closing strength via bypass valves. Maintenance-Free: Closed hydraulic system eliminates the need for ventilation. Durable Construction: Anodized aluminum case for durability and aesthetics. Low Temperature Operation: Designed to function efficiently at temperatures as low as -25°C. Emergency Release: Covered emergency release for convenience and safety. Precise Control: Separate adjustable opening and closing strength for precise movement control. Robust Performance: Suitable for gates up to 400 kg and 1.8 m in width. What's in the Box 1 x Swing 225AEB/29N Hydraulic Swing Gate Motor 1 x Installation manual Necessary mounting hardware Specifications Max Gate Wing Weight: 400 kg Max Gate Wing Width: 1.8 m Engine Tension: 230 V Piston Stroke Speed: 10 mm/sec Max Thrust: 4500 N Max Piston Stroke: 285 mm Max Aperture Angle: 110 degrees Operating Temperature: Down to -25°C Switching Duration: S3 30%

BFT ORO Hydraulic Motor for Gates Up to 1.8m | 230v

Product Overview The ORO hydraulic motor is a compact 230v operator designed for semi-intensive usage, making it ideal for private residences and small apartment blocks. This hydraulic motor is capable of automating swing gate leafs up to 1.8 meters wide and weighing up to 180kg. The ORO motor locks in the closed position only, ensuring secure closure while remaining open when needed. Key Features 230v hydraulic motor for reliable operation Suitable for gates up to 1.8m wide and 180kg in weight Locks in the closed position for added security Compact design ideal for private residences and small apartment blocks Hydraulic clutch impact reaction for safety Semi-intensive use for frequent operation Specifications SpecificationORO Hydraulic Motor Power Supply 230v Gate Leaf Length 1.8m Max Leaf Weight 180kg Control Panel RIGEL6 Cycle Time 20 sec Impact Reaction Hydraulic clutch Frequency of Use Semi-intensive Product Description The ORO Hydraulic Motor is designed to provide reliable automation for residential swing gates up to 1.8 meters in width and 180kg in weight. This compact 230v operator is perfect for private residences and small apartment blocks, offering secure closure by locking in the closed position only. The hydraulic clutch impact reaction ensures safety during operation, making the ORO motor a dependable choice for semi-intensive use applications. The ORO hydraulic motor features a quick cycle time of 20 seconds, allowing for efficient gate movement. Its compact design and compatibility with the RIGEL6 control panel make it easy to install and operate. Whether you need to automate a gate for a private residence or a small apartment block, the ORO hydraulic motor offers the performance and reliability you need. Order before 2pm for next working day delivery, subject to stock availability.

BFT LUX 2B Hydraulic Motor for Gates Up to 2m | 230v

Product Overview The LUX 2B hydraulic motor is a robust 230v operator designed for very intensive use, making it suitable for residential, industrial, and multi-residence environments. This hydraulic motor is capable of automating swing gate leafs up to 2 meters wide and weighing up to 300kg. The LUX 2B features a hydraulic lock, ensuring secure closure of the gate. Key Features 230v hydraulic motor for reliable and powerful operation Suitable for gates up to 2m wide and 300kg in weight Hydraulic lock for secure closure Designed for very intensive use Compatible with residential, industrial, and multi-residence environments Hydraulic clutch impact reaction for safety Specifications SpecificationLUX 2B Power Supply 230v Gate Leaf Length 2m Max Leaf Weight 300kg Control Panel RIGEL6 Cycle Time 17 sec Impact Reaction Hydraulic clutch Frequency of Use Very intensive Lux Product Range Lux ModelLeaf Length (m)Hydraulic LockingSlowdownInternal Stops Lux 2B 2m Yes No No Lux 2B FC 2m Yes No Yes Lux 2B R 2m Yes Yes No Lux GVS 3.5m No No No Lux GVR 3.5m No Yes No Lux GV 2B 3.5m Yes No No Product Description The LUX 2B Hydraulic Motor is designed to automate swing gates up to 2 meters in width and 300kg in weight, offering reliable and powerful performance with a 230v hydraulic system. The LUX 2B is ideal for very intensive use, making it suitable for a wide range of environments including residential, industrial, and multi-residence settings. The hydraulic lock ensures secure closure of the gate, providing added safety and security. With a quick cycle time of 17 seconds, the LUX 2B ensures efficient gate movement. The hydraulic clutch impact reaction enhances safety during operation, making it a dependable choice for intensive applications. Its compatibility with the RIGEL6 control panel simplifies installation and operation. Order before 2pm for next working day delivery, subject to stock availability.

BFT LUX R2B Hydraulic Motor for Gates Up to 2m with Slow Down on Closing | 230v

Product Overview The LUX 2B R hydraulic motor is a robust 230v operator designed for very intensive use, making it suitable for residential, industrial, and multi-residence environments. This hydraulic motor is capable of automating swing gate leafs up to 2 meters wide and weighing up to 300kg. The LUX 2B R features a hydraulic lock and built-in hydraulic slowdown on closing, ensuring secure and smooth gate operation. Key Features 230v hydraulic motor for reliable and powerful operation Suitable for gates up to 2m wide and 300kg in weight Hydraulic lock for secure closure Built-in hydraulic slowdown on closing for smooth operation Designed for very intensive use Compatible with residential, industrial, and multi-residence environments Hydraulic clutch impact reaction for safety Specifications SpecificationLUX 2B R Power Supply 230v Gate Leaf Length 2m Max Leaf Weight 300kg Control Panel RIGEL6 Cycle Time 16 sec + slowdown Impact Reaction Hydraulic clutch Frequency of Use Very intensive Lux Product Range Lux ModelLeaf Length (m)Hydraulic LockingSlowdownInternal Stops Lux 2B 2m Yes No No Lux 2B FC 2m Yes No Yes Lux 2B R 2m Yes Yes No Lux GVS 3.5m No No No Lux GVR 3.5m No Yes No Lux GV 2B 3.5m Yes No No Product Description The LUX 2B R Hydraulic Motor is designed to automate swing gates up to 2 meters in width and 300kg in weight, offering reliable and powerful performance with a 230v hydraulic system. The LUX 2B R is ideal for very intensive use, making it suitable for a wide range of environments including residential, industrial, and multi-residence settings. The hydraulic lock ensures secure closure of the gate, while the built-in hydraulic slowdown on closing provides smooth and controlled operation. With a cycle time of 16 seconds plus slowdown, the LUX 2B R ensures efficient gate movement. The hydraulic clutch impact reaction enhances safety during operation, making it a dependable choice for intensive applications. Its compatibility with the RIGEL6 control panel simplifies installation and operation. Order before 2pm for next working day delivery, subject to stock availability.

BFT LUX FC2B Hydraulic Motor for Gates Up to 2m with Internal Stop | 230v

Product Overview The LUX FC2B hydraulic motor is a robust 230v operator designed for very intensive use, making it suitable for industrial and multi-residence environments. This hydraulic motor is capable of automating swing gate leafs up to 2 meters wide and weighing up to 300kg. The LUX FC2B features an internal stop in the closed position, ensuring secure and precise gate closure. Key Features 230v hydraulic motor for reliable and powerful operation Suitable for gates up to 2m wide and 300kg in weight Internal stop in closed position for secure closure Available with electric or hydraulic lock options Hydraulic clutch to reduce closing impact Pushing force of 3,000N and pulling force of 2,600N Sturdy oleodynamic piston for exceptional strength Designed for very intensive use Compatible with industrial and multi-residence environments Specifications SpecificationLUX FC2B Power Supply 230v Gate Leaf Length 2m Max Leaf Weight 300kg Control Panel RIGEL6 Cycle Time 17 sec Impact Reaction Hydraulic clutch Frequency of Use Very intensive Lux Product Range Lux ModelLeaf Length (m)Hydraulic LockingSlowdownInternal Stops Lux 2B 2m Yes No No Lux 2B FC 2m Yes No Yes Lux 2B R 2m Yes Yes No Lux GVS 3.5m No No No Lux GVR 3.5m No Yes No Lux GV 2B 3.5m Yes No No Product Description The LUX FC2B Hydraulic Motor is designed to automate swing gates up to 2 meters in width and 300kg in weight, offering reliable and powerful performance with a 230v hydraulic system. The LUX FC2B is ideal for very intensive use, making it suitable for a wide range of environments including industrial and multi-residence settings. The internal stop in the closed position ensures secure and precise gate closure. The LUX FC2B offers secure locking options with either electric or hydraulic lock and features a hydraulic clutch to reduce the impact during closing. The sturdy oleodynamic piston provides exceptional strength with a pushing force of 3,000N and a pulling force of 2,600N. Its compatibility with the RIGEL6 control panel simplifies installation and operation. With a cycle time of 17 seconds, the LUX FC2B ensures efficient gate movement, making it a dependable choice for intensive applications. Whether you need to automate a gate for an industrial site or a multi-residence complex, the LUX FC2B hydraulic motor delivers the performance and reliability you need. Order before 2pm for next working day delivery, subject to stock availability.

BFT SUB BT Hydraulic Underground Operator for Gates Up to 2m | 24v | Motor Only

Product Overview The SUB BT hydraulic underground motor is a compact and sturdy 24v operator designed for very intensive use, making it suitable for residential, industrial, and multi-residence environments. This hydraulic motor is capable of automating swing gate leaves up to 2 meters in length and weighing up to 800kg. The SUB BT is fitted with mechanical stops and a virtual encoder, providing maximum anti-crushing safety with electronic slowdown and the D-Track system. Key Features 24v hydraulic motor for reliable and powerful operation Suitable for gates up to 2m long and 800kg in weight Mechanical stops and virtual encoder for precision and safety D-Track system for maximum anti-crushing safety Built-in electronic slowdown for smooth operation Designed for very intensive use Compatible with residential, industrial, and multi-residence environments Specifications SpecificationSUB BT Power Supply 24v Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel THALIA P Cycle Time 9° per sec Impact Reaction D-Track Frequency of Use Very intensive Product Description The SUB BT Hydraulic Underground Motor is designed to automate swing gates up to 2 meters in length and 800kg in weight, offering reliable and powerful performance with a 24v hydraulic system. The SUB BT is ideal for very intensive use, making it suitable for a wide range of environments including residential, industrial, and multi-residence settings. The motor is fitted with mechanical stops and a virtual encoder, ensuring precision and safety in operation. The SUB BT features the D-Track system, providing maximum anti-crushing safety with built-in electronic slowdown for smooth and controlled gate movements. With a cycle time of 9° per second, the SUB BT ensures efficient gate operation, making it a dependable choice for intensive applications. The requirement for an electric lock for gate leaves up to 2.5 meters adds an extra layer of security. Whether you need to automate a gate for an industrial site or a residential complex, the SUB BT hydraulic underground motor delivers the performance and reliability you need. Order before 2pm for next working day delivery, subject to stock availability.

BFT Virgo Smart BT B Twin Kit | Swing Gates Up to 2m (24v)

Product Overview The Virgo Smart BT B Twin Kit is a versatile and easy-to-install 24V gate operator suitable for swing gates up to 2 meters in length and weighing up to 200kg per leaf. This operator is designed to adapt to various installation environments, including pillars up to 235mm deep or areas with limited lateral space, thanks to its articulated and optional sliding arms. The Virgo Smart BT A ensures smooth and efficient gate operation with the built-in Thalia control panel and a wide range of customizable features. Key Features 24V gate operator suitable for various environments Articulated and optional sliding arms for versatile installation Compatible with pillars up to 235mm deep Built-in Thalia control panel for easier programming U-Link compatible for advanced connectivity Semi-intensive frequency of use Mechanical locking and electronic torque limiter for impact reaction Slowdown function for smooth operation Specifications Power Supply: 24V Max Gate Leaf Length: 2m Max Leaf Weight: 200kg Control Panel: Thalia Cycle Time: 14 sec Slowdown: Yes Locking: Mechanical Impact Reaction: Electronic torque limiter Frequency of Use: Semi-intensive Protection Rating: IP44 Temperature Range: -20°C to 55°C Product Description The Virgo Smart BT B Twin Kit is an excellent choice for residential and light commercial swing gates up to 2 meters in length and 200kg in weight. This 24V gate operator is designed for easy installation and versatility, making it suitable for various installation environments, including deep pillars and limited lateral spaces. The articulated arm and optional sliding arm provide flexibility in installation, ensuring a perfect fit for your gate system. The built-in Thalia control panel is mounted in a raised position for easier access and programming, offering a wide range of features for a customized installation. The Virgo Smart BT A is also U-Link compatible, allowing for advanced connectivity and integration with other automation systems. This gate operator features mechanical locking and an electronic torque limiter for impact reaction, ensuring safe and reliable operation. The slowdown function ensures smooth opening and closing, enhancing the overall user experience. With a semi-intensive frequency of use, the Virgo Smart BT A is perfect for residential and light commercial applications. Kit Includes: 2 x Virgo Smart Operators 1 x Built-in Thalia Control Panel & Receiver 2 x Mitto Radio Transmitters 1 x Pair of Compacta 180° Photocells 1 x 24V Radius Light FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

BFT ORO Hydraulic Motor Twin Kit for Gates up to 1.8m (230v)

ORO Hydraulic Motor Twin Kit for Gates up to 1.8m (230v) The Oro is a compact 230v hydraulic operator for semi-intensive usage. It is designed for private residences and small apartment blocks. It is capable of automating swing gate leafs up to 1.8 metres wide and weighing up to 180kg. The operator locks in closed position only.

BFT LUX 2B Hydraulic Motor Twin Kit | Gates Up to 2m (230v)

Product Overview The LUX 2B Hydraulic Motor Twin Kit is designed for residential, industrial, and multi-residence swing gates up to 2 meters in length and weighing up to 300kg per leaf. This 230V hydraulic gate operator offers robust and reliable performance, making it ideal for very intensive use in various gate automation applications. The hydraulic motor ensures smooth and efficient operation, providing a durable solution for gate automation. Key Features 230V hydraulic motor for robust performance Suitable for swing gates up to 2 meters and 300kg per leaf Reliable and durable hydraulic operation Quick and easy installation Hydraulic lock for secure operation Designed for very intensive use Specifications Power Supply: 230V Max Gate Leaf Length: 2m Max Gate Leaf Weight: 300kg Control Panel: RIGEL6 Cycle Time: 17 sec Impact Reaction: Hydraulic clutch Frequency of Use: Very intensive Product Description The LUX 2B Hydraulic Motor Twin Kit is an excellent choice for automating residential, industrial, and multi-residence swing gates up to 2 meters in length and 300kg in weight per leaf. The 230V hydraulic motor provides reliable and efficient operation, ensuring smooth and durable performance for various gate automation needs. The hydraulic operation offers consistent performance, making it suitable for frequent use and demanding environments. This kit includes two BFT Lux 2B 230v hydraulic motors, a BFT RIGEL 6 control panel, two BFT Mitto RB 2 button transmitters, a pair of BFT safety photocells, and a BFT antenna. The motors are designed for quick and easy installation, ensuring a hassle-free setup process. The hydraulic lock mechanism ensures secure operation, while the hydraulic clutch provides effective impact reaction, enhancing safety and reliability. With a protection level of IP44, the LUX 2B motors are built to withstand various environmental conditions, ensuring consistent performance in different weather conditions. The motors are suitable for operation in temperatures ranging from -20°C to 55°C, making them a versatile choice for different installation environments. Kit Includes: 2 x BFT Lux 2B 230v Hydraulic Motors 1 x BFT RIGEL 6 Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair of BFT Safety Photocells 1 x BFT Antenna Available Kits: Lux 2B Twin Kit: Leaf length 2m, Hydraulic Locking, No Slowdown, No Internal Stops Lux 2B FC Twin Kit: Leaf length 2m, Hydraulic Locking, No Slowdown, Yes Internal Stops Lux 2B R Twin Kit: Leaf length 2m, Hydraulic Locking, Yes Slowdown, No Internal Stops Lux GV S Twin Kit: Leaf length 3.5m, No Hydraulic Locking, No Slowdown, No Internal Stops Lux GV R Twin Kit: Leaf length 3.5m, No Hydraulic Locking, Yes Slowdown, No Internal Stops Lux GV 2B Twin Kit: Leaf length 3.5m, Yes Hydraulic Locking, No Slowdown, No Internal Stops FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

FAAC S800H ENC CBAC 100 | 24V Underground Hydraulic Operator | Motor Only

Product Overview The FAAC S800H ENC CBAC 100 is a 24V hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This robust operator is ideal for continuous use, providing reliable and efficient gate automation with advanced features. Key Features 24V hydraulic underground operator for swing-leaf gates. Suitable for gates with single-leaf width up to 2 meters. Continuous use frequency for high-performance operation. Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection). Integrated positive stops, eliminating the need for mechanical stops on the ground. FAAC patented hybrid technology for enhanced performance. Service release device for easy maintenance. Integrated handles for easier installation and handling. Option to add BUS XIB interface for applications using NO BUS devices. 2-year guarantee for peace of mind. Product Description FAAC S800H ENC CBAC 100 | 24V Underground Hydraulic Operator | Motor Only The FAAC S800H ENC CBAC 100 is a cutting-edge 24V hydraulic underground operator designed for swing-leaf gates in residential and condominium settings. This operator is capable of handling gates with a single-leaf width of up to 2 meters and is built for continuous use, ensuring consistent and reliable performance. The S800H ENC CBAC 100 features an integrated magnetic encoder with bus "2easy" technology, which utilizes a non-polarized two-wire connection for simplified installation and enhanced communication. The operator also includes integrated positive stops, eliminating the need for additional mechanical stops on the ground. FAAC's patented hybrid technology is incorporated into this operator, providing superior performance and durability. The service release device allows for easy maintenance, while the integrated handles facilitate installation and handling. Additionally, the operator can be equipped with a BUS XIB interface for compatibility with NO BUS devices. Technical Specifications SpecificationDetails Power Supply 24V Application Residential and Condominium Swing-Leaf Gates Max Gate Leaf Width 2 meters Use Frequency Continuous Integrated Encoder Magnetic with bus "2easy" Integrated Positive Stops Yes Technology FAAC Patented Hybrid Service Release Device Yes Handles Integrated for Easy Installation and Handling Optional Interface BUS XIB for NO BUS Devices Guarantee 2 Years Part Number 108720 The FAAC S800H ENC CBAC 100 is an excellent choice for those looking to replace or upgrade their current gate operator, offering advanced features, easy installation, and reliable performance for residential and condominium gates.

FAAC S800H ENC CBAC 180 | 24V Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800H ENC CBAC 180 is a 24V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 24V hydraulic underground operator motor Suitable for swing gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Product Description The FAAC S800H ENC CBAC 180 is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This 24V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800H ENC CBAC 180 offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800H ENC CBAC 180 24V hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC S800 CBAC Double Kit | Hydraulic Underground Operator for Swing Gates Up to 2m

Product Overview The FAAC S800 CBAC Double Kit is a comprehensive hydraulic underground operator kit designed for residential and condominium swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring continuous use frequency and an integrated absolute magnetic encoder with bus technology for precise control. The integrated positive stops ensure reliable operation without the need for additional ground stops. Key Features Double operator kit for swing gates Suitable for gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated absolute magnetic encoder with bus technology Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Easier handling and installation 2-year guarantee on all components Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800kg Motor Voltage: 230V AC Work Cycle: Continuous Product Description The FAAC S800 CBAC Double Kit is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This kit includes two powerful 24V DC hydraulic operators with a 100-degree opening angle, ensuring smooth and efficient gate operation. The integrated absolute magnetic encoder with bus technology guarantees precise and reliable control. The FAAC patented hybrid technology combines the benefits of hydraulic and electronic systems, offering enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated positive stops eliminate the need for additional mechanical stops on the ground, simplifying installation and reducing potential hazards. This kit is designed for quick and easy installation, making it suitable for both residential and condominium applications. The included control board, receiver, photocells, and transmitters ensure compatibility and safety, providing a complete solution for gate automation. With its comprehensive components, the FAAC S800 CBAC Double Kit offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V DC hydraulic operators S800H CBAC (100-degree opening) 2 x Collar assembly for S800 2 x Underground foundation boxes 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Installation manual and hardware

FAAC S800 CBAC Single Kit | Hydraulic Underground Operator for Swing Gates Up to 2m

Product Overview The FAAC S800 CBAC Single Kit is a comprehensive hydraulic underground operator kit designed for residential and condominium swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring continuous use frequency and an integrated absolute magnetic encoder with bus technology for precise control. The integrated positive stops ensure reliable operation without the need for additional ground stops. Key Features Single operator kit for swing gates Suitable for gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated absolute magnetic encoder with bus technology Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Easier handling and installation 2-year guarantee on all components Technical Specifications IP Rating: 67 Max Gate Leaf Length: 2.0m Max Gate Weight: 800kg Motor Voltage: 230V AC Work Cycle: Continuous Product Description The FAAC S800 CBAC Single Kit is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This kit includes a powerful 24V DC hydraulic operator with a 100-degree opening angle, ensuring smooth and efficient gate operation. The integrated absolute magnetic encoder with bus technology guarantees precise and reliable control. The FAAC patented hybrid technology combines the benefits of hydraulic and electronic systems, offering enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated positive stops eliminate the need for additional mechanical stops on the ground, simplifying installation and reducing potential hazards. This kit is designed for quick and easy installation, making it suitable for both residential and condominium applications. The included control board, receiver, photocells, and transmitters ensure compatibility and safety, providing a complete solution for gate automation. With its comprehensive components, the FAAC S800 CBAC Single Kit offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 24V DC hydraulic operator S800H CBAC (100-degree opening) 1 x Collar assembly for S800 1 x Underground foundation box 1 x E145S control board with housing 1 x Pair of photocells XP20B 1 x Receiver XF868 SLH 2 x Two-channel transmitters 868 SLH Installation manual and hardware

FAAC Underground hydraulic operator double kit S800 SB KIT

2 Year guarantee

FAAC Underground hydraulic operator single kit S800 SB KIT S

2 Year guarantee

FAAC 230v hydraulic operator for swing gates 402 CBC

FAAC 402 CBC 104468 Looking to replace a broken FAAC 402 CBC 104468. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates 402 SB

FAAC 402 SB 104469 Looking to replace a broken FAAC 402 SB 104469. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator kit for swing gates 402 UK KIT

2 Year guarantee

FAAC 24v hydraulic operator single kit for swing gates S450 UK KITS

2 Year guarantee

FAAC S450 UK KIT 24V | Hydraulic Operator Double Kit for Swing Gates Up to 2m

Product Overview The FAAC S450 UK KIT 24V is a comprehensive hydraulic operator double kit designed for residential swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring opening and closing hydraulic locks for enhanced security. Designed for intensive use, this kit is ideal for shared entrance gates to multiple residences, ensuring durability and reliability with every operation. Key Features Double operator kit for swing gates Suitable for gates up to 2 meters per leaf Strong and durable hydraulic motors Built for intensive use Built-in obstacle detection for safety Quick and easy installation Bus connection for peripherals with 2-wire non-polarized system 3-year warranty on all FAAC electrical components Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC S450 UK KIT 24V is designed to provide robust and reliable automation for double swing gates up to 2 meters in length per leaf. This kit includes powerful hydraulic motors that ensure smooth and efficient gate operation. The opening and closing hydraulic locks offer enhanced security, making this kit ideal for intensive use in residential settings with numerous visitors throughout the day. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The control panel includes bus terminals for the connection of photocells and accessories with a 2-wire non-polarized wiring system, speeding up the installation process and preventing errors. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC S450 UK KIT 24V offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC S450H CBAC 24V Operators 1 x FAAC E124 Control Board 1 x FAAC XF 868 SLH Receiver 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20BD Pair of Photocells Installation manual and hardware

FAAC 230v hydraulic operator for swing gates motor only 422 CBC

FAAC 422 CBC 104208 Looking to replace a broken FAAC 422 CBC 104208. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 230v hydraulic operator for swing gates motor only 422 CBACS

FAAC 422 CBACS 0-75L 104209 Looking to replace a broken FAAC 422 CBACS 0-75L 104209. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC Hydraulic operator for swing gates 422 CBAC

2 Year guarantee

FAAC Hydraulic operator kit for swing gates 422 UK KIT

2 Year guarantee

CAME Electromechanical Swing Gate Pair Kit AMICO-P24 | 24V | Up to 1.8m

Product OverviewThe CAME AMICO-P24 KIT is a complete automation solution for a pair of residential swing gates up to 1.8m in width or 250kg in weight per leaf. This 24V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for a pair of swing gates up to 1.8m in width or 250kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredKit Contents2x CAME A1824 24V Motors1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZL92Z Control Panel2x CAME TOPD4FKS Radio Remotes (806TS-0102)1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width1.8mMax gate leaf weight250kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit AMICO-S24 | 24V | Up to 1.8m

Product OverviewThe CAME AMICO-S24 KIT is a complete automation solution for a single residential swing gate up to 1.8m in width or 250kg in weight per leaf. This 24V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for a single swing gate up to 1.8m in width or 250kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredKit Contents1x CAME A1824 24V Motor1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZL90 Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width1.8mMax gate leaf weight250kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOA-P24 KIT | Swing Gate Automation | For Pair Gates Up to 1.8m

Product Overview The CAME STYLOA-P24 KIT is a comprehensive automation solution for a pair of residential small gate post swing gates up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required Product Description The CAME STYLOA-P24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motors. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 2x CAME STYLO-ME 24V Motors 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZL92Z Control Panel 2x CAME TOPD4RKS Radio Remotes - 806TS-0122 1x CAME TOP-A433N Antenna 2x CAME STYLO-BS Articulated Arms Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOA-S24 KIT | Swing Gate Automation | For Single Gates Up to 1.8m

Product Overview The CAME STYLOA-S24 KIT is a comprehensive automation solution for a single residential small gate post swing gate up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required Product Description The CAME STYLOA-S24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motors. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 1x STYLO-ME motor 1x STYLO-BS articulated arm 1x pair DIR-10 photocells 1x ZL192 control board 2x TOP-432NA remote transmitters 1x TOP-A4332N antenna 1x AF43S radio card Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOS-P24 KIT | Swing Gate Automation | For Pair Gates Up to 1.8m

Product Overview The CAME STYLOS-P24 KIT is a comprehensive automation solution for a pair of residential small gate post swing gates up to 1.8m in width or 100kg in weight per leaf. This 24V slide arm kit is ideal for smaller-sized posts and can operate in limited spaces due to its compact design and articulated transmission arm. The kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, and built-in obstacle detection for enhanced safety. Key Features Suitable for swing gates up to 1.8m in width or 100kg in weight per leaf, and up to 150kg for gates up to 0.8m in width Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop Locking in open and closed positions, eliminating the need for additional locking devices Low voltage with built-in encoders for safe operation LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Quick and easy installation with minimal excavation required Compatible with CAME Key for simple setup and backup by smartphone CAME Cloud Technology for remote management and control Product Description The CAME STYLOS-P24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 100kg per leaf (or 150kg for gates up to 0.8m), this kit ensures powerful and reliable performance with its 24V motors and articulated transmission arms. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 2x 24V Stylo Gearmotors (with Encoder) 2x Arms 1x Control Panel 1x Plug-in Radio Frequency Code 2x Dual Frequency 4-Button Fixed Code Transmitters 1x Tuned Antenna 1x Pair Safety Photocells Specifications Max gate leaf width: 1.8m Max gate leaf weight: 100kg (150kg for gates up to 0.8m) Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOS-S24 KIT | Swing Gate Automation | For Single Gates Up to 1.8m

Product Overview The CAME STYLOS-S24 KIT is a comprehensive automation solution for a single residential small gate post swing gate up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required 3-year warranty on all CAME electrical components CAME Cloud Technology for remote management and control Product Description The CAME STYLOS-S24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motor and transmission arm. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 1x STYLO-ME motor 1x STYLO-BD transmission arm 1x pair DIR-10 photocells 1x ZLX24SA control board 2x TOP-432NA remote transmitters 1x TOP-A4332N antenna 1x AF43S radio card   Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FROGAV | Underground Swing Gate Motor | For Gates Up to 1.3m

Product Overview The CAME FROGAV is a durable underground swing gate motor designed for single residential gates up to 1.3m in length and 300kg in weight. This 230V motor offers reliable performance with a mechanical locking method and a duty cycle of 30 cycles per hour, making it suitable for residential applications. The motor provides a maximum opening angle of 110 degrees and operates at a gate speed of 9 seconds for 90 degrees. With an IP67 protection rating, it is built to withstand various environmental conditions, ensuring durability and longevity. Key Features Suitable for single swing gates up to 1.3m in length or 300kg in weight Underground installation for a discreet appearance Mechanical locking motor for enhanced security Operates at 230V for reliable performance Gate speed: 9 seconds for 90 degrees Maximum opening angle: 110 degrees Duty cycle: 30 cycles per hour IP67 protection rating for resistance to environmental conditions Product Description The CAME FROGAV is an advanced underground swing gate motor tailored for residential gates requiring a discreet and efficient automation solution. Engineered to handle gates up to 1.3m in length and weighing up to 300kg, this motor ensures robust and reliable performance with its electromechanical design. The motor is mechanically locking, providing an added layer of security to keep the gate securely closed when not in operation. With a motor voltage of 230V, the CAME FROGAV delivers consistent power and efficiency. It features a gate speed of 9 seconds for a 90-degree opening, making it both quick and effective in daily use. The motor supports a maximum opening angle of 110 degrees, accommodating various gate configurations. Designed for semi-intensive duty cycles with 30 cycles per hour, it is ideal for residential settings with moderate traffic. The motor's IP67 protection rating ensures it is well-protected against dust and water ingress, making it suitable for outdoor installations in different weather conditions. This underground motor is perfect for homeowners seeking a reliable and unobtrusive automation solution for their swing gates. What Comes in the Box 1x CAME FROGAV 230V Motor Specifications Gate Type: Swing Gate Max Weight Per Gate: 300kg Max Length Per Gate: 1300mm Installation Type: Underground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 230V Gate Speed: 9 Seconds for 90 Degrees Duty Cycle: 30 Cycles/Hour Protection Rating: IP67 Category: Swing Gate Motor

CAME Amico, 230V AC self locking swing gate operator suitable for use with gate leaves up to 1.8m

CAME Amico A18230 Looking to replace a broken CAME Amico  A18230. This item can be used as a direct replacement for your broken or damaged gate motor. If you are confident that you have the correct part and model buy before 2 pm for the next working day delivery. subject to stock. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

CAME A1824 | 24V Electro-Mechanical Automation for Swing Gates | Up to 1.8m

Product Overview The CAME A1824 is a high-performance 24V electro-mechanical motor designed for automating swing gates with gate leaves up to 1.8 meters. This motor provides reliable and efficient operation, making it an ideal direct replacement for broken or damaged CAME A1824 gate motors. Ensure your gate automation system is back up and running smoothly with this high-quality replacement motor. Key Features Suitable for swing gates with leaves up to 1.8 meters. 24V electro-mechanical operation for robust performance. Direct replacement for CAME A1824 models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. Product Description CAME A1824 | 24V Electro-Mechanical Automation for Swing Gates | Up to 1.8m The CAME A1824 is engineered to provide reliable and efficient automation for swing gates up to 1.8 meters in length. This 24V electro-mechanical operator ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the A1824 offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME A1824 motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Up to 1.8m Operation Electro-Mechanical Replacement For CAME A1824 Condition Brand New Manufacturer CAME For those looking to replace their existing CAME A1824 gate motor, this 24V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME Electro mechanical automation for swing gates STYLO-ME 24v for up to 1.8m

CAME STYLO-ME Looking to replace a broken CAME STYLO-ME. This item can be used as a direct replacement for your broken or damaged gate motor. If you are confident that you have the correct part and model buy before 2 pm for the next working day delivery. subject to stock. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

CAME Electro mechanical automation for swing gates STYLO-RME 24v up to 1.8m

CAME STYLO-RME Looking to replace a broken CAME STYLO-RME. This item can be used as a direct replacement for your broken or damaged gate motor. If you are confident that you have the correct part and model buy before 2 pm for the next working day delivery. subject to stock. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

BENINCA 230v HYDRO 18AC hydraulic ram HD.18AC

2 Year guarantee

BENINCA KHD.18AC | 230V HYDRO 18AC Hydraulic Ram Pair Kit | Up to 1.8m Leaf

Product Overview The KHD.18AC 230V HYDRO 18AC Hydraulic Ram Pair Kit is designed for swing gates with leaves up to 1.8 meters. This kit provides reliable and robust automation for residential gates, ensuring smooth and secure operation. Backed by a 2-year guarantee, this kit ensures long-term durability and performance. Product Description The BENINCA KHD.18AC 230V HYDRO 18AC Hydraulic Ram Pair Kit is an ideal solution for automating swing gates with leaves up to 1.8 meters in length. This kit includes two HYDRO post-mounted rams, a BRAINY control panel, PUPILLA photocells, a long-range aerial, and two 2-button transmitters. The system is designed for easy installation and reliable performance, making it perfect for residential applications. The irreversible operator ensures secure and stable gate movement, providing peace of mind for users. Key Features High Capacity: Suitable for swing gate leaves up to 1.8m. Reliable Performance: Designed for consistent and smooth operation. Complete Kit: Includes all necessary components for a full installation. Irreversible Operator: Ensures secure and stable gate movement. 2-Year Guarantee: Ensures long-term reliability and peace of mind. Easy Installation: Post-mounted rams and comprehensive control system simplify setup. What's in the Box 2 x HYDRO Post-Mounted Rams 1 x BRAINY Control Panel 1 x PUPILLA Photocells 1 x AW 433.92Mhz Long Range Aerial 2 x TO.GO2VA 2-Button Transmitters Specifications Power Supply: 230V Maximum Gate Leaf Length: Up to 1.8m Control Panel: BRAINY Photocells: PUPILLA Aerial Frequency: 433.92Mhz Warranty: 2 years

BENINCA KSHD.18AC | 230V HYDRO 18AC Hydraulic Ram Single Kit | Up to 1.8m Leaf

Product Overview The KSHD.18AC 230V HYDRO 18AC Hydraulic Ram Single Kit is designed for swing gates with leaves up to 1.8 meters. This kit provides reliable and robust automation for residential gates, ensuring smooth and secure operation. Backed by a 2-year guarantee, this kit ensures long-term durability and performance. Product Description The BENINCA KSHD.18AC 230V HYDRO 18AC Hydraulic Ram Single Kit is an ideal solution for automating a single swing gate with a leaf up to 1.8 meters in length. This kit includes one HYDRO post-mounted ram, a BRAINY control panel, PUPILLA photocells, a long-range aerial, and two 2-button transmitters. The system is designed for easy installation and reliable performance, making it perfect for residential applications. The hydraulic ram provides powerful and smooth gate movement, ensuring secure and stable operation. The irreversible operator ensures that the gate remains locked when not in motion, providing additional security. Key Features High Capacity: Suitable for swing gate leaf up to 1.8m. Reliable Performance: Designed for consistent and smooth operation. Complete Kit: Includes all necessary components for a full installation. Irreversible Operator: Ensures the gate remains securely locked when not in use. Powerful Hydraulic Ram: Ensures secure and stable gate movement. 2-Year Guarantee: Ensures long-term reliability and peace of mind. Easy Installation: Post-mounted ram and comprehensive control system simplify setup. What's in the Box 1 x HYDRO Post-Mounted Ram 1 x BRAINY Control Panel 1 x PUPILLA Photocells 1 x AW 433.92Mhz Long Range Aerial 2 x TO.GO2WV 2-Button Transmitters Specifications Power Supply: 230V Maximum Gate Leaf Length: Up to 1.8m Control Panel: BRAINY Photocells: PUPILLA Aerial Frequency: 433.92Mhz Warranty: 2 years