GIBIDI GROUND KIT | Underground Electromechanical Twin Kit for Leaf up to 3.5m

Product Overview GROUND KIT - Underground Electromechanical Twin Kit for Leaf up to 3.5 meters is available in both 230Vac and 24Vdc versions. Designed for swinging gates of medium dimensions and weight, it is suitable for both residential and intensive use. Key Features Easy to install with a self-supporting foundation box Silent and fast operation, opening in just 12 seconds Adjustable opening speed in the 24Vdc version Robust construction with steel and bronze-aluminium Adjustable anti-crushing sensitivity for enhanced safety Compliant with EN12453 safety standards Painted reduction gear for protection against atmospheric and environmental agents Product Description EASY TO INSTALL Thanks to the special self-supporting foundation box. Ambidextrous motor and pre-assembled accessories. SILENT AND FAST Only 12 seconds to open the gate! Extremely silent, due to the materials used and tidy finishing of the gears. In the 24Vdc version, it is possible to adjust the opening speed. TECHNOLOGICAL AND SAFE GROUND is built entirely in steel and bronze-aluminium, robust and reliable over time. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity to enhance safety, in compliance with EN12453 standards. The unlocking key has a European profile. A COMPLETE AND RELIABLE RANGE GROUND meets all aesthetic needs of your gate and remains reliable over time, thanks to the completely painted reduction gear, protecting it from atmospheric and environmental agents. Specifications FeatureGROUND610GROUND624 Type of use Residential Heavy Duty Frequency of use 30% Heavy Duty Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 400W 150W Protection degree IP67 IP67 Shaft rotation speed 7°/s 7°/s Max torque 530 Nm 320 Nm Adjustable force Electronic Electronic Adjustable speed Electronic ** Electronic ** Max leaf width 3.5 m * 3.5 m * Max door opening angle 110° 110° Operating temperature -20°C to +60°C -20°C to +60°C Encoder/limit switch LS are optional limit switches O/C LS are optional limit switches O/C Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 11.1 Kg 11.1 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ComponentKIT GROUND610KIT GROUND624 GROUND Operators 2 2 AJ49300 Self-supporting painted foundation box 2 2 AS06320 for 1 or 2 motors (F4) 1 Not Applicable AS06399 for 1 or 2 motors (BA 24) Not Applicable 1 AU02910 2 channels plug-in receiver board for control units 1 1 Complete flashing lamp device 1 1 AU03100 MAKO remote control 433Mhz 2 2 AU01940 wall mounted key selector model DCS100 1 1 AU02250 pair of DCF180 wall mounted photocells 1 1 AJ75800 gate warning plate 1 1 Note: The kit is supplied in multiple packages.

GIBIDI AGO KIT K160/BFSLT & K164/BFSLT | Above Ground Kit for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO KIT - Above Ground Kit for Gates up to 4 meters - is an electromechanical operator kit available in both 230 Vac and 24 Vdc versions with an encoder. It is designed for medium and large swinging gates, suitable for residential and heavy use applications. Key Features Easy to install with adjustable brackets Silent and fast movement with steel, bronze-aluminium gears 24 Vdc version includes encoder for automatic programming and anti-crushing sensitivity Complies with EN 12453 safety standards Compact design, made with die-cast aluminium and stainless steel Optional battery kit for operation during power cuts Product Description EASY TO INSTALL Thanks to the adjustable brackets, it is not necessary to weld for installation. SILENT AND FAST Gears in steel, bronze-aluminium allowing for a high and adjustable speed of movement. TECHNOLOGICAL AND SAFE The 24 Vdc version is provided with an encoder to manage automatic programming and the adjustment of integrated anti-crushing sensitivity. Complies with the highest safety level as per EN 12453 standards. DESIGN AND RELIABILITY The most compact in its category with a tapered and simple design, suitable for every kind of gate. Made completely in die-cast aluminium and steel powder coating painted. The rod is in stainless steel. POWER CUT/BATTERY BACK-UP By the use of an optional battery kit, the gates can operate during the loss of a mains power supply. Specifications FeatureAGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width* 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg NOTE: *In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ItemKIT AGO400 (K160/BFSLT)KIT AGO424E (K164/BFSLT) AGO operators 2x 2x Gate warning plate (AJ75800) 1x 1x MAKO remote control 433Mhz (AU03100) 2x 2x Wall mounted key selector model DCS100 (AU01940) 1x 1x Pair of DCF180 wall mounted photocells (AU02250) 1x 1x Complete flashing lamp device (70710 - 70724) 1x 1x Radio receiver board 1x 1x For 1 or 2 motors (F4) (AS06320) 1x Not Applicable For 1 or 2 motors (BE24) (AS06250) Not Applicable 1x 2 channels plug-in receiver board for control units (AU02910) 1x Not Applicable

GIBIDI AGO | Above Ground Operator for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO Above Ground Operator is a versatile electromechanical operator designed for medium to large swinging gates, accommodating gate lengths up to 4 meters. Available in both 230 Vac and 24 Vdc versions, this operator is suitable for residential and heavy-duty applications. The AGO operator is engineered for easy installation, silent and fast operation, and incorporates advanced technological features for enhanced safety and reliability. Key Features Available in 230 Vac and 24 Vdc versions with encoder Suitable for gates up to 4 meters in length Easy installation with adjustable brackets, no welding required Silent operation with steel and bronze-aluminium gears Adjustable speed of movement Complies with EN 12453 safety standards Compact design with die-cast aluminium and stainless steel rod Optional battery kit for operation during power outages Product Description Specifications  AGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width * 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg The AGO Above Ground Operator is designed for straightforward installation, eliminating the need for welding thanks to its adjustable brackets. It features a compact and tapered design that fits aesthetically with any gate style, made entirely of die-cast aluminium with a stainless steel rod for enhanced durability and reliability. This operator ensures a silent and fast operation due to its high-quality steel and bronze-aluminium gears. The 24 Vdc version includes an encoder for automatic programming and integrated anti-crushing sensitivity, meeting the highest safety standards as per EN 12453. Additionally, the optional battery kit ensures gate operation during power outages. Installation and Usage The AGO operator is easy to install with its pre-cabled components and adjustable brackets. It provides a smooth and quiet operation, with adjustable speed to meet specific requirements. Suitable for both residential and heavy-duty use, the AGO operator is a versatile solution for gates up to 4 meters wide. Its robust construction and advanced safety features make it an ideal choice for various gate automation applications. NOTE: In case of blind leaf or wind presence, or if the leaf is over 2.5 meters, the use of an electric lock is necessary.

GIBIDI SERRA320 (15840) | 24V Motor Arm | Heavy Duty Swing Gate Operator

Product Overview The SERRA320 is a 24V DC electromechanical motor arm designed for medium to large swing gates, ideal for heavy-duty applications. Featuring an integrated encoder and adjustable brackets, this operator ensures a straightforward and efficient installation process. The motor arm is engineered for silent and fast operation, utilizing high-quality materials such as steel and bronze-aluminium for the gears, providing adjustable speed and superior performance. Key Features 24V DC electromechanical operator with integrated encoder Pre-cabled operator and encoder for easy installation Includes adjustable brackets and integrated door retainers Gears made from steel and bronze-aluminium for durability Adjustable speed of movement for precise control Extremely silent operation Complies with EN12453 safety standards Embedded anti-crushing sensitivity in control units Product Description Specifications  SERRA320 Type of use Heavy Duty Frequency of use 40% Motor power supply 24 Vdc Absorbed power 100W Protection degree IP44 Rod speed 20 mm/s Max rod stroke 320 mm Max thrust force 1500 N Adjustable force Electronic Adjustable speed Yes ** Max leaf width 3.5 m * Operating temperature -20°C to +60°C Encoder/limit switch Encoder Type of lubrication Grease GBD WH-01 Weight of the unit 8.2 Kg The SERRA320 motor arm is built for reliability and high performance. It is equipped with a latest-generation encoder and a powerful motor suitable for heavy use. The gears and dragging screw are fully protected, ensuring long-term durability. The Gibidi control units include embedded anti-crushing sensitivity, providing enhanced safety as per EN12453 standards. NOTE: In case of blind leaf or wind presence or leaf over 2.5 m, the use of an electric lock is necessary. Adjustable speed is available through the use of the BE24 control board. Installation and Operation Installing the SERRA320 is straightforward thanks to its pre-cabled components and included adjustable brackets. The integrated door retainers and the ambidextrous design of the motor further simplify the setup. Once installed, the operator provides a fast and silent operation, opening gates with high precision and reliability. The adjustable speed and electronic force regulation allow for a tailored performance to meet specific installation requirements. The SERRA320 is suitable for both residential and commercial applications, offering a robust solution for gates with a maximum width of 3.5 meters. Its high-quality construction and advanced technological features make it an ideal choice for demanding environments.

GIBIDI KIT FLOOR | Hydraulic Underground Automation Kit | 230Vac & 24Vdc, 150° & 180° Opening

Product Overview The KIT FLOOR Hydraulic Underground Automation Kit is a comprehensive solution for automating medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this kit is suitable for residential and heavy-duty use. The FLOOR operators are designed for easy installation, silent and fast operation, and provide advanced technological safety features. This kit includes all necessary components for a reliable and efficient gate automation system. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The KIT FLOOR Hydraulic Underground Automation Kit includes all necessary components for a comprehensive gate automation system. The FLOOR operators are engineered for easy installation, thanks to the special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. Kit Includes  K870/BFSLTK875/BFSLTK880/BFSLTK884/BFSLT FLOOR Operators Included Included Included Included AJ49000 Self-supporting painted foundation box Included Included Included Included AJ01400 Limit switches kit Included Not Applicable Included Not Applicable AS06320 For 1 or 2 motors (F4) Included Not Applicable Included Not Applicable AS06300 For 1 or 2 motors (BA 24) Not Applicable Included Not Applicable Included AU02910 2 channels plug-in receiver board for control units Included Included Included Included 70710 - 70724 Complete flashing lamp device Included Included Included Included AU03100 MAKO remote control 433Mhz Included Included Included Included AU01940 Wall mounted key selector model DCS100 Included Included Included Included PLEASE NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

GIBIDI FLOOR | Hydraulic Underground Operator | 230Vac & 24Vdc, Heavy Duty, 150° & 180° Opening

Product Overview The FLOOR Hydraulic Underground Operator is a robust and reliable solution for medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this operator is suitable for residential and heavy use. The FLOOR operator is designed for easy installation, silent and fast operation, and provides advanced technological safety features. Its high-quality materials and in-depth quality testing ensure a long-lasting and efficient performance. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The FLOOR Hydraulic Underground Operator is engineered for easy installation, thanks to its special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

KEY AUTOMATION UNDER KIT | Underground Swing Gates Kit | For Gates up to 3.5m (24V)

Product Overview The UNDER KIT for swing gates with leaves up to 3.5 meters (24V) offers an efficient and concealed solution for gate automation. This underground kit includes two foundation boxes, ensuring robust installation and protection of mechanical parts from external debris. The water-resistant SUB remote control, along with the 14A control board, provides the possibility of adding up to 20 additional LED lights for economical and automatic night illumination. Programming and data management are simplified with the KUBE PRO wireless module. Key Features Without encoder Adjustable speed and slowdown functions Mechanical parts well protected from external debris Water-resistant SUB remote control included 14A control board with support for up to 20 additional LED lights Simple and intuitive programming with KUBE PRO wireless module Product Description Operator Specifications ModelTorque [Nm]Working Cycle [%]Opening Time at 90° [sec]Control BoardPower [Vdc]Consumption [A]Absorbed Power [W]Protection DegreeDimensions [mm]Weight [kg]Working Temperature [°C]Leaf Maximum Weight [kg] UND24 250 80 18-25* 14AB2 24 5 120 IP67 412 x 160 x 346 10.1 -20 + 55 600 Kit Includes 2x UND24 Operators ECLIPSE 14AB2 Control Board RX4K Receiver FT33 Photocells SUB44WR Remote KUBE Remote Control Module 2x Foundation Boxes The Kit requires a KUBE PRO to program for the first time. The Kube PRO can then be removed and swapped for a KUBE that allows the gates and lights to be operated from a phone. The lights will also come on during each operation. Link to KUBE PRO is HERE. Dimensions Dimensions (L - D - H): 412 x 160 x 346 mm Usage Limits The values shown can be significantly reduced due to the shape, height of the gate, and the presence of strong winds.  

KEY AUTOMATION SUN KIT | Sliding Gates Kit |

 Product Overview The SUN KIT for sliding gates up to 700 kg (24V) offers a reliable and efficient solution for gate automation. Designed for intensive use, this kit includes a water-resistant SUB remote control and a Night Light System with integrated LED lights. The 14A control unit supports up to 20 additional LED lights, providing automatic and economical illumination for your entrance during the night. Simple programming and data management are ensured with the KUBE PRO wireless module. Key Features Slowdown function in both opening and closing to preserve gate integrity Designed for intensive use (24 Vdc version) Water-resistant SUB remote control included Night Light System with LED lights 14A control unit supports up to 20 additional LED lights Simple and intuitive programming with KUBE PRO wireless module Built-in LED light (Dark Edition) Extremely silent mechanics with diecast aluminum body UV-resistant plastic covers Easy and intuitive unlocking system with SUB remote Gear reduction with extra-large bearing for high performance High technological materials resistant to weather conditions Product Description Operator Specifications ModelSpeed [cm/s]Torque [Nm]Working Cycle [%]Control BoardPower [Vac]Consumption [A]Absorbed Power [W]Integrated LightsProtection DegreeDimensions [mm]Weight [kg]Working Temperature [°C]Leaf Maximum Weight [kg] SUN5024F 40' 23 80 14A 230 1.3 300 yes IP44 330 x 210 x 300 13.5 -20 + 55 500 SUN7024 25' 26 80 14A 230 1.5 345 yes IP44 330 x 210 x 300 13.8 -20 + 55 700 Kit Includes SUN5024 Operator ECLIPSE 14A Control Board RX4K Receiver FT33 Photocells SUB44WR Remote KUBE Remote Control Module Dimensions Dimensions (L - D - H): 330 x 210 x 300 mm Usage Limits The values shown can be significantly reduced due to the shape, height of the gate, and the presence of strong winds.

KEY AUTOMATION RAY KIT | Swing Gates Kit | For Gates up to 4m (24V)

Product Overview The RAY KIT for swing gates with leaves up to 4 meters (24V) offers a comprehensive solution for gate automation. This kit is designed for durability and ease of use, featuring robust mechanical parts protected from external agents and an intuitive KUBE PRO wireless module for simple programming and data management. The kit includes a water-resistant SUB remote control and a 14A control unit, capable of supporting up to 20 additional LED lights to illuminate your entrance economically during the night. Key Features Easy slowdown and open limit settings Mechanical parts well protected from external agents Opening mechanical stop included Simple and intuitive programming with KUBE PRO wireless module Water-resistant SUB remote control included 14A control unit with support for up to 20 additional LED lights Built-in LED light (Dark Edition) Extremely silent mechanics with diecast aluminum body UV-resistant plastic covers High technological materials resistant to weather conditions Robust bronze lock nut on endless screw and metal gearing Product Description Operator Specifications SpecificationRAY2524RAY2524ERAY4024EKRAY4024RRAY3024FRAY4024D MECHANICAL DATA Speed (cm/s) 2.6 2.6 1.5 3.0 3.8 1.5 Pulling Force (N) 1500 1500 2000 1000 1000 2000 Working Cycle (%) 80 80 80 80 80 80 Opening Time at 90° (sec) 18-25* 18-25* 20-25* 20-25* 10-15* 20-25 ELECTRICAL DATA Control Board 14AB/CC24FULL 14AB 14AB2 14AB2 14AB2F 14AB2 Power Supply 24V DC/230V AC 24V DC 24V DC 24V DC 24V DC 24V DC Consumption (A) 3.5 3.5 5.0 5.0 5.0 5.0 Absorbed Power (W) 85 85 120 120 120 120 Integrated Lights Yes Yes Yes Yes Yes Yes GENERIC DATA Protection Degree (IP) 44 44 44 44 44 44 Dimensions (L-D-H) mm 844-100-104 844-100-104 844-100-104 844-100-104 844-100-104 844-100-104 Weight (kg) 8.01/6.0 9.65 9.3 9.4 9.3 9.3 Working Temperature (°C) -20 to +55 -20 to +55 -20 to +55 -20 to +55 -20 to +55 -20 to +55 Maximum Leaf Weight (kg) 500 500 600 500 300 600 Kit Includes 2x Operators ECLIPSE 14AB Control Board RX4K Receiver FT33 Photocells SUB44WR Remote KUBE Remote Control Module The Kit requires a KUBE PRO to program for the first time. The Kube PRO can then be removed and swapped for a KUBE that allows the gates and lights to be operated from a phone. The lights will also come on during each operation. Another Unique feature of these motors is that the remote control doubles as the key to release the gates if the power fails, so you will always be able to get through the gates during a power cut. Link to KUBE PRO is HERE. Dimensions Dimensions (L - D - H): 844 x 100 x 104 mm Usage Limits The values shown can be significantly reduced due to the shape, height of the gate, and the presence of strong winds.

FADINI JUNIOR 624 KIT 24 Vdc for Sliding Gates up to 400 kg

FADINI JUNIOR 624 KIT for Sliding Gates up to 400 kg  624K0VL KIT CONTAINS 1x F/624L - 24 Vdc geared motor operator with ELPRO 62 control unit, magnetic limit switch, speed 12 m/min 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate 625K0VL KIT CONTAINS 1x F/624L - 24 Vdc geared motor operator with ELPRO 62 control unit, magnetic limit switch, speed 12 m/min 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868,19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI F/624L JUNIOR 624 24Vdc Electromechanical Geared Motor Operator for Sliding Gates up to 400 kg

Product Overview The FADINI JUNIOR 624 24Vdc electromechanical geared motor operator is designed for sliding gates up to 400 kg. With its modern style and integrated blue LED light, it not only looks sleek but also provides a clear indication of the automation status. Key Features Quiet 24Vdc geared motor operator with oil bath lubrication Easy gate travel programming with acceleration and deceleration Magnetic limit switch for precise operation Anti-crush system with encoder and amperometric detection Release handle with key for manual operation Master/slave function for bi-parting sliding gates Pre-set for battery backup in case of power failure Complies with EN 12445 and EN 12453 European norms Product Description The FADINI JUNIOR 624 offers a powerful and quiet solution for automating sliding gates. The 24Vdc geared motor operator features a coupling of worm and plastic crown gear in an oil bath, supported by ball bearings for smooth and quiet operation. The gate travel can be easily programmed with a button, ensuring smooth acceleration and deceleration in each cycle. Safety is a top priority with the JUNIOR 624, equipped with an anti-crush system that uses an encoder and amperometric detection to reverse the gate travel upon detecting obstacles. The magnetic limit switch provides precise operation, while the aluminium handle and key allow for manual release in case of emergencies. The motor operator is versatile, offering a master/slave function for bi-parting sliding gates and pre-set for battery backup to ensure continuous operation during power failures. The JUNIOR 624 is tested and certified, complying with the European norms EN 12445 and EN 12453, and bears the CE marking following type tests. Specifications FeatureSpecification Power supply (Vac – Hz) 230 - 50 Motor voltage (V) 24 Max. absorbed power (W) 220 Max. absorbed current (A) 6.3 Max. torque (N) 400 Motor revolutions (rpm) 3,000 Speed (m/min) 12 Gear ratio 1:61 Working temperature (°C) -25 ÷ +50 Grade of protection IP 54 Oil type F/706L Weight (kg) 11 Frequency of use intensive Notes Product includes an electromechanical geared motor operator with an electronic control unit, encoder for anti-crush safety, pinion for the rack, anchoring base plate with hooks for ground fixing, two keys for the release handle, magnetic limit switch, and a pair of limit switch brackets. The gate structure, size, and possible strong winds may affect the indicated max. weight. Ensure the gate is adequate for automatic operation and remove any friction points.

FADINI KIT DARDO 424 | Swing Gate Operator Kit | 400 kg, 2.5 m

Product Overview The FADINI KIT DARDO 424 is a comprehensive solution for automating swinging gates with leaves weighing up to 400 kg and measuring up to 2.5 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation for residential applications. Key Features Supports gate leaves up to 400 kg in weight and 2.5 m in length 24 Vdc operators for robust performance Control unit for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT DARDO 424 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc operators (F/424L) that provide secure and efficient operation, ensuring that your gates remain functional and safe. The included ELPRO 42 control unit (F/4200L) offers precise control over the gate's operations, allowing for smooth opening and closing cycles. For added safety, the kit features a pair of ZERO.PH surface mount photocells (F/140L) to detect obstacles and prevent accidents. Remote operation is made simple with the VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. The entire kit is designed for easy installation and reliable performance, making it an excellent choice for residential swing gate automation. Kit Contents for F/4240K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/4241K0VL 2x F/424L - 24 Vdc operator 1x F/4200L - ELPRO 42 control unit 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI DARDO 424 | Electromechanical Operator for Swing Gates

Product Overview The FADINI DARDO 424 is an electromechanical operator designed for swinging gates with an articulated arm, perfect for residential use. Combining quiet operation with advanced safety and smart features, the DARDO 424 offers reliable and efficient gate automation. Key Features Quiet operation with 24 Vdc irreversible electromechanical operator Steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings Release system for manual operation using the same key for the protection cover Smart gate delay programming, both automatic and manual Mechanical stop plates for open and closed positions, adjustable and fitted to the cover Anti-crush system with encoder and constant amperometric monitoring Acceleration and deceleration on each cycle Robust protection cover made of pressure cast aluminum with polyester powder coating Product Description The FADINI DARDO 424 electromechanical operator is designed for the smooth and efficient automation of residential swing gates. The operator features a 24 Vdc irreversible motor, ensuring quiet and reliable operation. The mechanics of the DARDO 424 include a steel rolled worm screw, brass threaded nut, teflon crown gear, radial bearing, and lubricated bushings for enhanced durability and performance. The DARDO 424 is equipped with a release system that allows for manual operation by using the same key that opens the protection cover, providing convenience in case of power failure. Gate delay can be programmed automatically or manually through the ELPRO 42 electronic control unit. The operator also features mechanical stop plates in both open and closed positions, which are adjustable and fitted to the cover. Safety is a top priority with the DARDO 424, featuring an anti-crush system that utilizes an encoder and constant amperometric monitoring to detect obstacles and reverse gate travel upon impact. The operator ensures smooth operation with acceleration and deceleration on each cycle. The robust and compact design of the DARDO 424 includes a protection cover made of pressure cast aluminum with a polyester powder coating, ensuring durability and resistance to various weather conditions. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Max. absorbed power: 80 W Max. absorbed current: 3.5 A Opening time 90°: 16 ÷ 20 s Speed: 16 ÷ 20 mm/s Max. torque: 1,000 N Working temperature: -20°C to +50°C Grade of protection: IP44 Rod useful stroke: 320 mm Weight: 6.5 kg Frequency of use: Very-intensive Note: Product includes an electromechanical operator complete with rear and front brackets fixing by screws, incorporated open and close stop plates, cable inlet gland for power supply and encoder, and two keys to open the sliding lid protecting the release device. For gates wider than 2 meters per leaf, an electric lock is required.

FADINI KIT BART 350 | Swing Gate Operator Kit | 300 kg, 2.3 m

Product Overview The FADINI KIT BART 350 is a comprehensive kit designed for automating swinging gates with leaves weighing up to 300 kg and measuring up to 2.3 meters in length. This kit includes everything needed for a reliable and efficient gate automation system, ensuring smooth and secure operation. Key Features Supports gate leaves up to 300 kg in weight and 2.3 m in length 24 Vdc geared motor operators for robust performance Master and slave control units for precise management Photocells for enhanced safety Transmitter and receiver for convenient remote control Flashing light for visual alerts Warning plate included Product Description The FADINI KIT BART 350 is designed to automate swing gates with ease and reliability. This kit includes two powerful 24 Vdc geared motor operators, one master (F/351L) with the ELPRO 35M control unit and one slave (F/352L) with the ELPRO 35S control board, providing secure and synchronized operation of your gates. The included ZERO.PH surface mount photocells (F/140L) enhance safety by detecting obstacles and preventing accidents during gate movement. For remote operation, the kit features two VIX 53/4 TR 4-channel transmitters (F/5313GL) in lime green color, operating at 868.19 MHz, and the VIX 53/2 R plug-in radio receiver (F/5311L). The kit also includes a ZERO.L flashing light (F/152L) to provide visual alerts during gate movement, enhancing safety and visibility. Additionally, a warning plate (F/2127L) is included to inform and caution users about the automated gate system. Kit Contents for F/3520K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/142L - ZERO.K key-switch, surface mount standard cylinder 1x F/140L - ZERO.PH pair of photocells, surface mount 1x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate Kit Contents for F/3521K0VL 1x F/351L - Master geared motor operator 24 Vdc with ELPRO 35M control unit 1x F/352L - Slave geared motor operator 24 Vdc with ELPRO 35S control board 2x F/358L - Articulated arm 1x F/140L - ZERO.PH pair of photocells, surface mount 2x F/5313GL - VIX 53/4 TR 4-channel transmitter, 868.19 MHz lime green colour 1x F/5311L - VIX 53/2 R plug-in radio receiver 1x F/152L - ZERO.L Flashing light, 230 Vac - 24 Vac/dc 1x F/2127L - Warning plate

FADINI BART 350 | Electromechanical Operator for Residential Swing Gates

Product Overview The FADINI BART 350 is an on-the-gate mount, irreversible electromechanical operator with an articulated arm, specifically designed for residential swing gates. Combining modern style with advanced functionality, the BART 350 ensures reliable and efficient gate operation. Key Features Modern design with a blue LED lamp on the cover indicating operator status Quiet operation with a 24 Vdc irreversible geared motor on ball bearings Simple automatic programming for setting opening and slowdown times Manual programming for gate delay times Crush prevention system using an encoder and constant amperometric monitoring Zinc-coated steel fixing plate and shearing preventing, zinc-coated steel arm Limit switch micro-switch and mechanical gate stop in open gate position Overriding by handle and key for manual operation Tested and certified in compliance with EN 12445 and EN 12453 European Norms Product Description The FADINI BART 350 is designed for quiet and efficient operation, making it an ideal choice for residential swing gates. The operator features a modern design with a blue LED lamp on the cover that indicates the status of the gate operator. The 24 Vdc irreversible geared motor operates on ball bearings, ensuring smooth and quiet operation. Programming the BART 350 is straightforward, with automatic settings for opening and slowdown times, and manual programming for gate delay times. The crush prevention system, which includes an encoder and constant amperometric monitoring, ensures safe operation by detecting obstacles and reversing gate travel when necessary. The operator is built to be strong and compact, with a zinc-coated steel fixing plate and an articulated or sliding arm made of zinc-coated steel. It includes limit switch micro-switches and a mechanical gate stop in the open gate position, with an optional stop in the closed gate position. The operator can be manually overridden using a handle and key. The BART 350 is tested and certified to meet EN 12445 and EN 12453 European Norms, ensuring compliance with safety standards. Technical Data Power supply: 230 Vac, 50 Hz Motor voltage: 24 Vdc Absorbed power: 150 W Absorbed current: 5 A Max. torque: 180 Nm Opening/closing time: 16 s (95°) Working temperature: -20°C to +50°C Grade of protection: IP53 Kind of lubrication: Grease Motor-pump static weight: 8 kg Weight: 10 kg Frequency of use: Intensive Note: Each code includes an electromechanical geared motor operator complete with fixing plate, two cams and three limit switch micro-switches, mechanical gate stop in open gate position, two keys for the release handle, and an electronic control board (ELPRO 35M for code 351L or ELPRO 35S for code 352L).

CAME FE4024V | High-Speed Self-Locking Gearmotor 24V | Swing Gates

Product Overview The CAME FE4024V High-Speed Self-Locking Gearmotor 24V is a powerful and efficient solution for swing gates, designed to replace broken or damaged gate motors seamlessly. This motor is ideal for residential and medium-duty applications, offering reliable performance for gates up to 4 meters in width and 800 kg in weight. Key Features Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Installation Type: Above Ground Max Opening Angle: 90 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 Specifications Motor Voltage: 24V Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Max Opening Angle: 90 Degrees Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 What's in the Box 1x CAME FE4024V 24V Motor

CAME F7024E - 24V | Self-Locking Articulated Arm Operator | Swing Gates

Product Overview The CAME F7024E 24V Self-Locking Articulated Arm Operator is a robust solution for swing gates, designed to replace broken or damaged gate motors seamlessly. This motor is ideal for residential and medium-duty applications, offering reliable performance for gates up to 2.4 meters in width and 300 kg in weight. Key Features Gate Type: Swing Gate Max Weight Per Gate: 300kg Max Length Per Gate: 2400mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 18 Seconds for 90 Degrees Duty Cycle: Intensive Protection Rating: IP54 Specifications Motor Voltage: 24V Max Weight Per Gate: 300kg Max Length Per Gate: 2400mm Max Opening Angle: 110 Degrees Gate Speed: 18 Seconds for 90 Degrees Duty Cycle: Intensive Protection Rating: IP54 What's in the Box 1x CAME F7024E 24V Motor

CAME F1024 - 24V | Self-Locking Motor with Articulated Arm | Swing Gates

Product Overview The CAME F1024 24V Self-Locking Motor with Articulated Arm is a robust solution for swing gates, designed to replace broken or damaged gate motors seamlessly. This motor is ideal for residential and medium-duty applications, offering reliable performance for gates up to 4 meters in width and 800 kg in weight. Key Features Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Installation Type: Above Ground Max Opening Angle: 90 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP54 Specifications Motor Voltage: 24V Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Max Opening Angle: 90 Degrees Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP54 What's in the Box 1x CAME F1024 24V Motor

CAME ATS50DGS - 801MP-0080 | 24V Irreversible Telescopic Motor with Encoder

Product Overview The CAME ATS50DGS - 801MP-0080 is a robust and efficient telescopic motor designed for swing gates up to 5 meters in length and 1000 kg in weight. This 24V irreversible motor comes with an integrated encoder, ensuring reliable and precise operation for both residential and commercial applications. Key Features 24V Electromechanical Motor: Provides consistent and efficient performance. Max Gate Weight: Supports gates up to 1000 kg. Max Gate Length: Suitable for gates up to 5 meters in length. Irreversible Telescopic Design: Ensures the gate remains securely closed. Fast Opening Speed: Opens gates in 20 seconds to 90 degrees. Intensive Use: Designed for up to 20 cycles per hour. Max Opening Angle: Capable of opening gates up to 120 degrees. Mechanically Locking Motor: Enhances security by locking the gate in place. Protection Rating: IP 44, suitable for outdoor use. Integrated Encoder: Provides precise control and positioning. Product Description The CAME ATS50DGS telescopic motor is engineered for durability and high performance, making it an ideal choice for swing gates up to 5 meters in length and weighing up to 1000 kg. This motor is perfect for both residential and commercial environments, providing secure and efficient gate operation. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. The irreversible design ensures that the gate remains securely closed, enhancing security. The motor's fast opening speed of 20 seconds to 90 degrees makes it suitable for environments where quick access is essential. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 1000 kg Max Length Per Gate: 5000 mm Installation Type: Above Ground Max Opening Angle: 120 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: 20 Cycles/Hour Upgrade your gate automation with the robust and efficient CAME ATS50DGS telescopic motor. Perfect for ensuring secure and smooth gate movement in various settings.

CAME ATS30DGS - 801MP-0070 | 24V Irreversible Telescopic Motor with Encoder

Product Overview The CAME ATS30DGS - 801MP-0070 is a durable and efficient telescopic motor designed for swing gates up to 3 meters in length and 800 kg in weight. This 24V irreversible motor comes with an integrated encoder, ensuring reliable and precise operation for both residential and commercial applications. Key Features 24V Electromechanical Motor: Provides consistent and efficient performance. Max Gate Weight: Supports gates up to 800 kg. Max Gate Length: Suitable for gates up to 3 meters in length. Irreversible Telescopic Design: Ensures the gate remains securely closed. Fast Opening Speed: Opens gates in 15 seconds to 90 degrees. Intensive Use: Designed for up to 20 cycles per hour. Max Opening Angle: Capable of opening gates up to 120 degrees. Mechanically Locking Motor: Enhances security by locking the gate in place. Protection Rating: IP 44, suitable for outdoor use. Integrated Encoder: Provides precise control and positioning. Product Description The CAME ATS30DGS telescopic motor is engineered for reliability and performance, making it an ideal choice for swing gates up to 3 meters in length and weighing up to 800 kg. This motor is perfect for both residential and commercial environments, providing secure and efficient gate operation. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. The irreversible design ensures that the gate remains securely closed, enhancing security. The motor's fast opening speed of 15 seconds to 90 degrees makes it suitable for environments where quick access is essential. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 800 kg Max Length Per Gate: 3000 mm Installation Type: Above Ground Max Opening Angle: 120 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: 20 Cycles/Hour Upgrade your gate automation with the robust and efficient CAME ATS30DGS telescopic motor. Perfect for ensuring secure and smooth gate movement in various settings.

CAME FTX20DLS - 801MB-0120 | Articulated Arm Motor 24V | For Gates Up to 2m - Slave Motor

Product Overview The CAME FTX20DLS - 801MB-0120 is a robust articulated arm motor designed for swing gates up to 2 meters in length and 250 kg in weight. This slave motor operates on 24V and offers reliable and efficient performance for both residential and commercial applications. Key Features 24V Electromechanical Motor: Ensures smooth and reliable operation. Max Gate Weight: Suitable for gates up to 250 kg. Max Gate Length: Handles gates up to 2 meters in length. Adjustable Speed: Allows for customized gate movement speed. Intensive Duty Cycle: Designed for frequent use without overheating. Max Opening Angle: Capable of opening gates up to 110 degrees. Mechanically Locking Motor: Provides secure locking when the gate is closed. Protection Rating: IP 44, suitable for outdoor use. Product Description The CAME FTX20DLS articulated arm motor is engineered for durability and high performance, making it an excellent choice for swing gates up to 2 meters in length and weighing up to 250 kg. This motor is ideal for both residential and commercial settings where reliable and secure gate operation is essential. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. As a slave motor, it complements the master unit to provide synchronized and efficient gate operation. Designed for intensive use, the FTX20DLS can handle frequent operations without overheating, making it suitable for busy environments. The motor's mechanically locking feature ensures that the gate remains securely closed when not in operation, enhancing security. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 250 kg Max Length Per Gate: 2000 mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: Intensive Upgrade your gate automation with the reliable and efficient CAME FTX20DLS articulated arm motor. Perfect for ensuring secure and smooth gate movement in various settings.

CAME FTX20DLC - 801MB-0110 | Articulated Arm Motor 24V with Control Panel | For Gates Up to 2m

Product Overview The CAME FTX20DLC - 801MB-0110 is a robust articulated arm motor designed for swing gates up to 2 meters in length and 250 kg in weight. This motor includes a control panel and operates on 24V, offering reliable and efficient performance for both residential and commercial applications. Key Features 24V Electromechanical Motor: Ensures smooth and reliable operation. Max Gate Weight: Suitable for gates up to 250 kg. Max Gate Length: Handles gates up to 2 meters in length. Control Panel Included: Integrated control panel for easy setup and operation. Adjustable Speed: Allows for customized gate movement speed. Intensive Duty Cycle: Designed for frequent use without overheating. Max Opening Angle: Capable of opening gates up to 110 degrees. Mechanically Locking Motor: Provides secure locking when the gate is closed. Protection Rating: IP 44, suitable for outdoor use. Product Description The CAME FTX20DLC articulated arm motor is engineered for durability and high performance, making it an excellent choice for swing gates up to 2 meters in length and weighing up to 250 kg. This motor is ideal for both residential and commercial settings where reliable and secure gate operation is essential. This motor operates on a 24V electromechanical system, ensuring smooth and consistent performance. The included control panel simplifies installation and operation, allowing for easy customization of gate settings, including adjustable speed and opening angles. Designed for intensive use, the FTX20DLC can handle frequent operations without overheating, making it suitable for busy environments. The motor's mechanically locking feature ensures that the gate remains securely closed when not in operation, enhancing security. Technical Specifications Power Input: 24V Gate Type: Swing Gate Max Weight Per Gate: 250 kg Max Length Per Gate: 2000 mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Protection Rating: IP 44 Duty Cycle: Intensive Upgrade your gate automation with the reliable and efficient CAME FTX20DLC articulated arm motor, complete with a control panel for easy setup and operation. Perfect for ensuring secure and smooth gate movement in various settings.

CAME FTL20DGC | 24V Articulated Arm Motor with Control Panel for Swing Gates up to 2m - 801MB-0080

Product Overview The CAME FTL20DGC 24V Articulated Arm Motor with Control Panel is an ideal solution for swing gates, specifically designed for residential and condominium applications. This motor provides intensive use capabilities, ensuring reliable performance for gates up to 2m in width and 200kg in weight. Replace your broken or damaged gate motor with this direct replacement, which comes brand new and genuine from the manufacturer in the UK. Key Features Gate Type: Swing Gate Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Installation Type: Above Ground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 Specifications Motor Voltage: 24V Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Max Opening Angle: 110 Degrees Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP44 What's in the Box 1x CAME FTL20DGC 24V Motor with Control Panel - 801MB-0080

CAME FTX20DGC 24V Articulated Arm Motor for Swing Gates up to 2m - 801MB-0070

CAME FTX20DGC 24V Articulated Arm Motor for Swing Gates up to 2m Looking to replace a broken CAME FTX20DGC - 801MB-0070? This item is a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Product Features Gate Type: Swing Gate Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What’s Included 1x CAME FTX20DGC 24v Motor - 801MB-0070 Ensure your gate operates smoothly and reliably with the CAME FTX20DGC articulated arm motor. Perfect for residential and condominium applications, this motor is designed to handle intensive use and provides reliable performance for swing gates up to 2m in width and 200kg in weight. Order now for a quick and efficient replacement!

CAME FTX-S KIT | Artic Arm Kit 24V for Single Swing Gate up to 2m, 200kg

Product Overview The CAME FTX-S Kit is a complete solution for residential or condominium applications, designed for single swing gates with small and medium-sized pillars. It accommodates gates up to 2m in width or 200kg per leaf, providing reliable and efficient automation. Key Features Battery Backup Available: Ensures gate operation during mains power failures, enhancing accessibility. Slow Down on Open and Close: Adjustable speed settings for smooth and personalized gate operation. Designed for Large Pillars: The articulated arm design allows easy installation on large square pillars without additional bracket modifications. Intensive Use: Ideal for shared entrance gates, designed for frequent daily operations. Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles. Quick & Easy Installation: Minimal excavation required, making it simple to install on existing hinged swing gates. Solar Ready: Can be powered by solar energy, reducing installation costs and environmental impact. CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app, available on the App Store and Google Play. CAME RIO Total Wireless Safety: No hard wiring needed between the control unit and safety accessories, speeding up installation time. Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What's in the Box? 1x CAME FTX20DLC 24v Motor with Control Panel - 801MB-0110 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of safety photocells 2x CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1x CAME TOP-A433N Antenna

CAME FTX-P KIT | Artic Arm Kit 24V for Pair of Swing Gates up to 2m, 200kg

Product Overview The CAME FTX-P Kit is a complete solution for residential or condominium applications, designed for swing gates with small and medium-sized pillars. It accommodates gates up to 2m in width or 200kg per leaf, providing reliable and efficient automation. Key Features Battery Backup Available: Ensures gate operation during mains power failures, enhancing accessibility. Slow Down on Open and Close: Adjustable speed settings for smooth and personalized gate operation. Designed for Large Pillars: The articulated arm design allows easy installation on large square pillars without additional bracket modifications. Intensive Use: Ideal for shared entrance gates, designed for frequent daily operations. Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles. Quick & Easy Installation: Minimal excavation required, making it simple to install on existing hinged swing gates. Solar Ready: Can be powered by solar energy, reducing installation costs and environmental impact. CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app, available on the App Store and Google Play. CAME RIO Total Wireless Safety: No hard wiring needed between the control unit and safety accessories, speeding up installation time. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 200kg Max Length Per Gate: 2000mm Above Or Underground: Above Ground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44 What's in the Box? 1x CAME FTX20DLC 24v Motor with Control Panel - 801MB-0110 1x CAME FTX20DLS 24v Motor - 801MB-0120 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of safety photocells 2x CAME TOPD4RKS Four Channel Black Radio Remote's - 806TS-0122 1x CAME TOP-A433N Antenna

CAME FERNIEV-S24 KIT | Rapid Articulated Arm Swing Gate Kit | Up to 4m, 24v

Product Overview The CAME FERNIEV-S24 KIT is a complete rapid articulated arm swing gate kit designed for residential or apartment block settings with large pillar gates, supporting a single gate up to a maximum width of 4 meters or 800kg in weight per leaf. This kit includes a powerful 24v motor and is designed for quick and easy installation on existing hinged swing gates. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 4 meters wide or 800kg per leaf 24v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 30 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME FERNIEV-S24 KIT is an ideal solution for automating swing gates in residential and apartment block settings, particularly those with large square pillars. This complete kit includes a powerful 24v motor capable of handling gates up to 4 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME FERNIEV-S24 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The motor in this kit is designed to be fast, offering a gate speed of 18 seconds for a 90-degree opening, ensuring efficient and timely access. What's in the Box? 1 CAME FE4024V 24v Motor 1 CAME AF43S Frequency Card 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZLJ24Z Control Panel 2 CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Above Ground Max Opening Angle: 90 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME FERNIEV-P24 KIT | Rapid Articulated Arm Swing Gate Kit | Up to 4m, 24v

Product Overview The CAME FERNIEV-P24 KIT is a complete rapid articulated arm swing gate kit designed for residential or apartment block settings with large pillar gates, supporting a pair of gates up to a maximum width of 4 meters or 800kg in weight per leaf. This kit includes powerful 24v motors and is designed for quick and easy installation on existing hinged swing gates. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 4 meters wide or 800kg per leaf 24v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 30 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME FERNIEV-P24 KIT is an ideal solution for automating swing gates in residential and apartment block settings, particularly those with large square pillars. This complete kit includes two powerful 24v motors capable of handling gates up to 4 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME FERNIEV-P24 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. What's in the Box? 2 CAME FE4024V 24v Motors 1 CAME AF43S Frequency Card 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZLJ24Z Control Panel 2 CAME TOPD4RKS Four Channel Black Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Above Ground Max Opening Angle: 90 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME AXO-P324 KIT | Single Swing Gate Kit | Up to 3m, 24v

Product OverviewThe CAME AXO-P324 KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 3 meters or 800kg in weight. This kit includes a RAL7024 Grey Motor and is designed for quick and easy installation on existing hinged swing gates.Key FeaturesBattery backup available for operation during mains power failureAdjustable slow down on open and close positionsAdjustable open and close limits without the need for a physical stopLCD display on the control panel for simplified programmingQuick and easy installation on existing hinged swing gatesSupports gates up to 3 meters wide or 800kg24v electromechanical motor for reliable performanceMechanically locking motor for enhanced securityAdjustable gate speed for customized operationDesigned for intensive use with a duty cycle of 20 cycles/hourBuilt-in obstacle detection for enhanced safetyCAME Cloud Technology for remote monitoring and controlIP 44 protection rating for durabilityProduct DescriptionThe CAME AXO-P324 KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 24v motor capable of handling gates up to 3 meters wide or 800kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates.Battery Backup AvailableThis motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation.Slow Down on Open and CloseThe CAME AXO-P324 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation.Integrated Open & Close LimitsThis equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation.LCD DisplayThe control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system.Intensive UseSpecifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences.Built-in Obstacle DetectionThe motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection.Quick & Easy InstallationThe equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors.CAME Cloud TechnologyWith CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere.What's in the Box?1 CAME AX3024 24v Motor1 CAME AF43S Frequency Card 433MHz1 CAME DIR-10 Pair of Safety Photocells1 CAME ZLJ24Z Control Panel2 CAME TOPD4RKS Radio Remotes - 806TS-01221 CAME TOP-A433N AntennaSpecificationsGate Type: Swing GateSingle Or Twin Kit: Single Gate KitMax Weight Per Gate: 800kgMax Length Per Gate: 3000mmAbove Or Underground: Above GroundMax Opening Angle: 120 DegreesMotor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 24vGate Speed: AdjustableDuty Cycle: IntensiveObstacle Detection: Built-In Obstacle DetectionProtection Rating: IP 44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME ATS-S524 ELECTRIC GATE KIT | Single Swing Gate Kit | Up to 5m, 24v

Product Overview The CAME ATS-S524 ELECTRIC GATE KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 5 meters or 1000kg in weight. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg 24v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Gate speed of 20 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME ATS-S524 ELECTRIC GATE KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 24v motor capable of handling gates up to 5 meters wide or 1000kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME ATS-S524 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. What's in the Box? 1 CAME ATS50DGS 24v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 24v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 20 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-S324 ELECTRIC GATE KIT | Single Swing Gate Kit | Up to 3m, 24v

Product Overview The CAME ATS-S324 ELECTRIC GATE KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 3 meters or 800kg in weight. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg 24v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Gate speed of 15 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME ATS-S324 ELECTRIC GATE KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 24v motor capable of handling gates up to 3 meters wide or 800kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME ATS-S324 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. What's in the Box? 1 CAME ATS30DGS 24v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 24v Control Panel 2 TOP44RBN - 806TS-0270 Rolling Code 433MHZ Transmitters 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 15 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-P524 ELECTRIC GATE KIT | Swing Gate Kit | Up to 5m, 24v, Twin Gate

Product Overview The CAME ATS-P524 ELECTRIC GATE KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 5 meters or 1000kg in weight per leaf. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg per leaf 24v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Gate speed of 20 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME ATS-P524 ELECTRIC GATE KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 24v motors capable of handling gates up to 5 meters wide or 1000kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME ATS-P524 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. What's in the Box? 2 CAME ATS50DGS 24v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 24v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 20 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATS-P324 ELECTRIC GATE KIT | Swing Gate Kit | Up to 3m, 24v, Twin Gate

Product Overview The CAME ATS-P324 ELECTRIC GATE KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 3 meters or 800kg in weight per leaf. This kit includes the brand new ATS Telescopic Motor, allowing installation on large pillars with a C dimension up to 200mm, and features a boltable post mounting bracket for quick and easy installation. Key Features Battery backup available for operation during mains power failure Adjustable slow down on open and close positions Adjustable open and close limits without the need for a physical stop LCD display on the control panel for simplified programming Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg per leaf 24v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Gate speed of 15 seconds for a 90-degree opening Designed for intensive use with a duty cycle of 20 cycles/hour Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control IP 44 protection rating for durability Product Description The CAME ATS-P324 ELECTRIC GATE KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 24v motors capable of handling gates up to 3 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME ATS-P324 KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Integrated Open & Close Limits This equipment features adjustable open and close limits, allowing you to set the gate limits of travel without the need for a physical stop in the ground. This feature has some limitations and may not function correctly on wider gates. If your gates are over 1.8m in width, it is advisable to talk to us before ordering if this feature is critical to your installation. LCD Display The control panel includes an LCD display, simplifying the programming process and making it easier to set up and adjust the system. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. The system can be easily fitted to gates and pillars with minimal excavation needed for the supply of mains power to the control board and low voltage cabling to the motors. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. What's in the Box? 2 CAME ATS30DGS 24v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 24v Control Panel 2 4-button Radio Remotes - 806TS-0122 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 15 Seconds 90 Degrees Duty Cycle: 20 Cycles/Hour Protection Rating: IP 44

CAME ATI-S324 KIT | Single Swing Gate Kit | Up to 3m, 24v

Product Overview The CAME ATI-S324 KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 3 meters or 800kg in weight. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg 24v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-S324 KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 24v motor capable of handling gates up to 3 meters wide or 800kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight, making it suitable for a wide range of residential and apartment block applications. Reliable Motor Equipped with a 24v electromechanical motor, the CAME ATI-S324 KIT ensures reliable and efficient operation. The motor is designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motor features a mechanically locking system, providing enhanced security by ensuring the gate remains securely closed when not in operation. Adjustable Gate Speed The gate speed is adjustable, allowing for customized operation to suit the specific needs of your property. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 1 CAME A3024A 24v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZL180 Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP 44

CAME ATI-S24 KIT | Single Swing Gate Kit | Up to 5m, 24v

Product Overview The CAME ATI-S24 KIT is a complete swing gate kit designed for single residential or apartment block gates, supporting a gate up to a maximum width of 5 meters or 1000kg in weight. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg 24v electromechanical motor for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-S24 KIT is an ideal solution for automating a single swing gate in residential and apartment block settings. This complete kit includes a powerful 24v motor capable of handling gates up to 5 meters wide or 1000kg in weight. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 5 meters in width or 1000kg in weight, making it suitable for a wide range of residential and apartment block applications. Reliable Motor Equipped with a 24v electromechanical motor, the CAME ATI-S24 KIT ensures reliable and efficient operation. The motor is designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motor features a mechanically locking system, providing enhanced security by ensuring the gate remains securely closed when not in operation. Adjustable Gate Speed The gate speed is adjustable, allowing for customized operation to suit the specific needs of your property. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 1 CAME A5024A 24v Motor 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZL180 Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP 44

CAME ATI-P324 KIT | Swing Gate Kit | Up to 3m, 24v, Twin Gate

Product Overview The CAME ATI-P324 KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 3 meters or 800kg in weight per leaf. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 3 meters wide or 800kg per leaf 24v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-P324 KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 24v motors capable of handling gates up to 3 meters wide or 800kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 3 meters in width or 800kg in weight per leaf, making it suitable for a wide range of residential and apartment block applications. Reliable Motors Equipped with two 24v electromechanical motors, the CAME ATI-P324 KIT ensures reliable and efficient operation. The motors are designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motors feature a mechanically locking system, providing enhanced security by ensuring the gates remain securely closed when not in operation. Adjustable Gate Speed The gate speed is adjustable, allowing for customized operation to suit the specific needs of your property. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 2 CAME A3024A 24v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZL180 Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800kg Max Length Per Gate: 3000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP 44

CAME ATI-P24 KIT | Swing Gate Kit | Up to 5m, 24v, Twin Gate

Product Overview The CAME ATI-P24 KIT is a complete swing gate kit designed for residential or apartment block settings, supporting a pair of gates up to a maximum width of 5 meters or 1000kg in weight per leaf. This kit includes all necessary components for a quick and easy installation on existing hinged swing gates. Key Features Quick and easy installation on existing hinged swing gates Supports gates up to 5 meters wide or 1000kg per leaf 24v electromechanical motors for reliable performance Mechanically locking motor for enhanced security Adjustable gate speed for customized operation Designed for intensive use with a duty cycle of 50 cycles/hour IP 44 protection rating for durability Product Description The CAME ATI-P24 KIT is an ideal solution for automating swing gates in residential and apartment block settings. This complete kit includes two powerful 24v motors capable of handling gates up to 5 meters wide or 1000kg in weight per leaf. The system is designed for quick and easy installation, making it a convenient choice for upgrading existing hinged swing gates. Quick & Easy Installation The equipment in this kit is designed for a straightforward installation process, allowing for rapid deployment on existing hinged swing gates without the need for extensive modifications. High Capacity This kit supports gates up to 5 meters in width or 1000kg in weight per leaf, making it suitable for a wide range of residential and apartment block applications. Reliable Motors Equipped with two 24v electromechanical motors, the CAME ATI-P24 KIT ensures reliable and efficient operation. The motors are designed for intensive use, with a duty cycle of up to 50 cycles per hour. Mechanically Locking Motor The motors feature a mechanically locking system, providing enhanced security by ensuring the gates remain securely closed when not in operation. Adjustable Gate Speed The gate speed is adjustable, allowing for customized operation to suit the specific needs of your property. Durable and Reliable The system boasts an IP 44 protection rating, ensuring durability and reliable performance in various weather conditions. What's in the Box? 2 CAME A5024A 24v Motors 1 CAME AF43S Frequency Card 433MHz 1 CAME DIR-10 Pair of Safety Photocells 1 CAME ZL180 Control Panel 2 CAME TOPD4FKS Four Channel Black Radio Remotes - 806TS-0102 1 CAME TOP-A433N Antenna Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 1000kg Max Length Per Gate: 5000mm Above Or Underground: Above Ground Max Opening Angle: 120 Degrees Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP 44

CAME BXV800GS KIT | Standard Sliding Gate Kit | Up to 800kg, Intensive Use

Product Overview The CAME BXV800GS KIT is a complete sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 800kg per leaf. The kit includes a RAL7024 grey motor, offering both functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control RIO Total Wireless Safety for quick and easy installation Product Description The CAME BXV800GS KIT is a reliable sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 800kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a gate speed of 12 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV800GS KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. What's in the Box? 1 CAME BXV08AGS 24v RAL7024 Grey Motor & Panel - 801MS-0122 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Kit Max Weight Per Gate: 800kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 12 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV600GS KIT | Standard Sliding Gate Kit | Up to 600kg, Intensive Use

Product Overview The CAME BXV600GS KIT is a complete sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 600kg per leaf. The kit includes a RAL7024 grey motor, offering both functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control RIO Total Wireless Safety for quick and easy installation Product Description The CAME BXV600GS KIT is a reliable sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 600kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a gate speed of 12 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV600GS KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. What's in the Box? 1 CAME BXV06AGS 24v RAL7024 Grey Motor & Panel - 801MS-0180 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Kit Max Weight Per Gate: 600kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 12 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV600GF KIT | Rapid Sliding Gate Kit | Up to 600kg, Intensive Use

Product Overview The CAME BXV600GF KIT is a complete rapid sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 600kg per leaf. The kit includes a RAL7024 grey motor with a tall cover for battery capacity, offering enhanced functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control Fast motor for rapid operation RIO Total Wireless Safety for quick and easy installation Large motor housing for additional components Product Description The CAME BXV600GF KIT is a robust rapid sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 600kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a rapid gate speed of 20 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV600GF KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The rapid motor operation ensures quick opening and closing of the gate, making it ideal for environments requiring fast access. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. CAME BXV Large Motor Housing The BXV motor housing offers the ability to include 2x 5.0 ah batteries for the battery backup system. Depending on the model, the BXV400 offers 70+ backup operations, the BXV600 offers 60+, and the BXV1000 offers 55+. The housing space is also suitable for additional third-party components such as induction loop cards, safety edge controllers, or time clocks when battery backup is not being used. What's in the Box? 1 CAME BXV06AGF 24v RAL7024 Grey Motor & Panel with Tall Cover - 801MS-0190 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Kit Max Weight Per Gate: 600kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 20 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV400GS KIT | Standard Sliding Gate Kit | Up to 400kg, Intensive Use

Product Overview The CAME BXV400GS KIT is a complete sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 400kg per leaf. The kit includes a RAL7024 grey motor, offering both functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control RIO Total Wireless Safety for quick and easy installation Product Description The CAME BXV400GS KIT is a reliable sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 400kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a gate speed of 12 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV400GS KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. What's in the Box? 1 CAME BXV04AGS 24v RAL7024 Grey Motor & Panel - 801MS-0150 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Kit Max Weight Per Gate: 400kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 12 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV400GF KIT | Rapid Sliding Gate Kit | Up to 400kg, Intensive Use

Product Overview The CAME BXV400GF KIT is a complete rapid sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 400kg per leaf. The kit includes a RAL7024 grey motor with a tall cover for battery capacity, offering enhanced functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control Fast motor for rapid operation RIO Total Wireless Safety for quick and easy installation Large motor housing for additional components Product Description The CAME BXV400GF KIT is a robust rapid sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 400kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a rapid gate speed of 22 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV400GF KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The rapid motor operation ensures quick opening and closing of the gate, making it ideal for environments requiring fast access. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. CAME BXV Large Motor Housing The BXV motor housing offers the ability to include 2x 5.0 ah batteries for the battery backup system. Depending on the model, the BXV400 offers 70+ backup operations, the BXV600 offers 60+, and the BXV1000 offers 55+. The housing space is also suitable for additional third-party components such as induction loop cards, safety edge controllers, or time clocks when battery backup is not being used. What's in the Box? 1 CAME BXV04AGF 24v RAL7024 Grey Motor & Panel with Tall Cover - 801MS-0160 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Kit Max Weight Per Gate: 400kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 22 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV1000GS KIT | Standard Sliding Gate Kit | Up to 1000kg, Intensive Use

Product Overview The CAME BXV1000GS KIT is a complete sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 1000kg per leaf. The kit includes a RAL7024 grey motor, offering both functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control RIO Total Wireless Safety for quick and easy installation Product Description The CAME BXV1000GS KIT is a robust sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 1000kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a gate speed of 12 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV1000GS KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. What's in the Box? 1 CAME BXV10AGS 24v RAL7024 Grey Motor & Panel - 801MS-0230 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 12 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 44

CAME BXV1000GF KIT | Rapid Sliding Gate Kit | Up to 1000kg, Intensive Use

Product Overview The CAME BXV1000GF KIT is a complete rapid sliding gate kit designed for residential and apartment block settings, supporting gates up to a maximum weight of 1000kg per leaf. The kit includes a RAL7024 grey motor with a tall cover for battery capacity, offering enhanced functionality and aesthetic appeal. Key Features Battery backup for operation during mains power failure Adjustable slow down on open and close positions Designed for intensive use, suitable for high-traffic areas Built-in obstacle detection for enhanced safety CAME Cloud Technology for remote monitoring and control Fast motor for rapid operation RIO Total Wireless Safety for quick and easy installation Large motor housing for additional components Product Description The CAME BXV1000GF KIT is a robust rapid sliding gate solution ideal for both residential and apartment block settings, with a capacity to handle gates up to 1000kg. This kit is designed for intensive usage, making it perfect for gates that experience frequent operation throughout the day. The motor is electromechanical and operates on a 24v power supply with a rapid gate speed of 20 meters per minute, ensuring efficient and reliable performance. Battery Backup Available This motor is equipped with a battery backup option, ensuring that your gate remains functional even during mains power failures. This feature is crucial for maintaining secure access to your property in any situation. Slow Down on Open and Close The CAME BXV1000GF KIT allows you to adjust the speed of your gate as it approaches the open and closed positions. This not only improves the overall installation but also adds a personalized and refined touch to your gate's operation. Intensive Use Specifically designed for intensive use, this gate motor can handle the demands of numerous visitors throughout the day. This makes it particularly useful for shared entrance gates serving a large number of residences. Built-in Obstacle Detection The motor features built-in obstacle detection, which can stop and reverse the gate upon detecting an obstacle. This safety feature detects obstacles by sensing an increase in resistance, which can be caused by a person, vehicle, object, or even wind obstructing the gate's path. It is recommended that all installations undergo an impact force test to ensure safety, with additional safety edges providing further protection. CAME Cloud Technology With CAME Cloud Technology, you can monitor and control your gate remotely via the internet. The XIP mobile app, available on both the App Store and Google Play, allows you to receive audio/video calls from your entry panel and open your gate from anywhere. Fast Motor The rapid motor operation ensures quick opening and closing of the gate, making it ideal for environments requiring fast access. CAME RIO Total Wireless Safety The RIO system eliminates the need for hard wiring between the control unit and safety accessories, speeding up installation time. This feature is ideal for updating existing systems to meet current safety standards. The control unit communicates with other modules via radio, ensuring a reliable and quick installation. CAME BXV Large Motor Housing The BXV motor housing offers the ability to include 2x 5.0 ah batteries for the battery backup system. Depending on the model, the BXV400 offers 70+ backup operations, the BXV600 offers 60+, and the BXV1000 offers 55+. The housing space is also suitable for additional third-party components such as induction loop cards, safety edge controllers, or time clocks when battery backup is not being used. What's in the Box? 1 CAME BXV10AGF 24v RAL7024 Grey Motor & Panel with Tall Cover - 801MS-0250 1 CAME AF43S Frequency Card 1 CAME DIR10 Pair of Safety Photocells 2 CAME TOP44RBN Four-channel rolling code transmitter 433mhz - 806TS-0270 1 CAME TOP-A433N Antenna Specifications Gate Type: Sliding Gate Single Or Twin Kit: Single Gate Kit Max Weight Per Gate: 1000kg Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 24v Gate Speed: 20 M/Min Duty Cycle: Intensive Obstacle Detection: Built-In Obstacle Detection Protection Rating: IP 54

CAME BXV10AGF Sliding Gate Rapid Motor | 24V | 1000kg Per Gate

Product Overview The CAME BXV10AGF Sliding Gate Rapid Motor is designed for sliding gates with a maximum weight of 1000kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a rapid speed of 20 meters per minute. Key Features Sliding gate motor suitable for gates up to 1000kg Operates on 24V Rapid speed of 20 meters per minute Electromechanical motor with mechanically locking method Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV10AGF - 801MS-0250 Looking to replace a broken CAME BXV10AGF - 801MS-0250? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 1000kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 20 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV10AGF motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its rapid speed of 20 meters per minute ensures quick and efficient gate movement, while the mechanically locking motor adds an extra layer of security. The electromechanical design guarantees consistent operation and longevity. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 1000kg. The motor's rapid speed and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV10AGF (801MS-0250), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV10AGS Sliding Gate Motor | 24V | 1000kg Per Gate

Product Overview The CAME BXV10AGS Sliding Gate Motor is designed for sliding gates with a maximum weight of 1000kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a speed of 12 meters per minute. Key Features Sliding gate motor suitable for gates up to 1000kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 12 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV10AGS - 801MS-0230 Looking to replace a broken CAME BXV10AGS - 801MS-0230? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 1000kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 12 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV10AGS motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. The speed of 12 meters per minute ensures efficient gate movement. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 1000kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV10AGS (801MS-0230), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV08AGS Sliding Gate Motor | 24V | 800kg Per Gate

Product Overview The CAME BXV08AGS Sliding Gate Motor is designed for sliding gates with a maximum weight of 800kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a speed of 12 meters per minute. Key Features Sliding gate motor suitable for gates up to 800kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 12 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV08AGS - 801MS-0210 Looking to replace a broken CAME BXV08AGS - 801MS-0210? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 800kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 12 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV08AGS motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. The speed of 12 meters per minute ensures efficient gate movement. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 800kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV08AGS (801MS-0210), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV06AGF Sliding Gate Rapid Motor | 24V | 600kg Per Gate

Product Overview The CAME BXV06AGF Sliding Gate Rapid Motor is designed for sliding gates with a maximum weight of 600kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a rapid speed of 20 meters per minute. Key Features Sliding gate motor suitable for gates up to 600kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 20 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV06AGF - 801MS-0190 Looking to replace a broken CAME BXV06AGF - 801MS-0190? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 600kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 20 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV06AGF motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. The rapid speed of 20 meters per minute ensures quick and efficient gate movement. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 600kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV06AGF (801MS-0190), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV06AGS Sliding Gate Motor | 24V | 600kg Per Gate

Product Overview The CAME BXV06AGS Sliding Gate Motor is designed for sliding gates with a maximum weight of 600kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a speed of 12 meters per minute. Key Features Sliding gate motor suitable for gates up to 600kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 12 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV06AGS - 801MS-0180 Looking to replace a broken CAME BXV06AGS - 801MS-0180? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 600kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 12 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV06AGS motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 600kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV06AGS (801MS-0180), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV04AGF Sliding Gate Rapid Motor | 24V | 400kg Per Gate

Product Overview The CAME BXV04AGF Sliding Gate Rapid Motor is designed for sliding gates with a maximum weight of 400kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation at a high speed of 22 meters per minute. Key Features Rapid sliding gate motor suitable for gates up to 400kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 22 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV04AGF - 801MS-0160 Looking to replace a broken CAME BXV04AGF - 801MS-0160? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 400kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 22 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV04AGF motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 400kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV04AGF (801MS-0160), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXV04AGS Sliding Gate Motor | 24V | 400kg Per Gate

Product Overview The CAME BXV04AGS Sliding Gate Motor is designed for sliding gates with a maximum weight of 400kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle an intensive duty cycle, ensuring robust and continuous operation. Key Features Sliding gate motor suitable for gates up to 400kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 12 meters per minute Intensive duty cycle Protection rating of IP 44 Product Description CAME BXV04AGS - 801MS-0150 Looking to replace a broken CAME BXV04AGS - 801MS-0150? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 400kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 12 M/Min Duty Cycle: Intensive Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXV04AGS motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 400kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXV04AGS (801MS-0150), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

CAME BXL04AGS Sliding Gate Motor | 24V | 400kg Per Gate

NO LONGER AVAILABLE       Product Overview The CAME BXL04AGS Sliding Gate Motor is designed for sliding gates with a maximum weight of 400kg per gate. This electromechanical motor operates on a 24V power supply and features a mechanically locking motor for secure and reliable performance. The motor is designed to handle a duty cycle of 30 cycles per hour, ensuring robust and continuous operation. Key Features Sliding gate motor suitable for gates up to 400kg Operates on 24V Electromechanical motor with mechanically locking method Gate speed of 10 meters per minute Duty cycle of 30 cycles per hour Protection rating of IP 44 Product Description CAME BXL04AGS - 801MS-0140 Looking to replace a broken CAME BXL04AGS - 801MS-0140? This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new, genuine, and direct from the manufacturer here in the UK, with full advice and technical support to aid you in getting your installation back up and running. Specifications Gate Type: Sliding Gate Max Weight Per Gate: 400kg Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: 10 M/Min Duty Cycle: 30 Cycles/Hour Protection Rating: IP 44 Category: Sliding Gate Motor Advanced Technology The BXL04AGS motor is built for high performance and reliability, making it ideal for both residential and light commercial applications. Its electromechanical design ensures consistent operation, while the mechanically locking motor adds an extra layer of security. Applications This sliding gate motor is suitable for residential and light commercial applications, providing robust performance and reliable operation for gates up to 400kg. The motor's electromechanical design and integrated safety features make it a top choice for secure and efficient gate automation. Replacement and Support If you are looking to replace a broken CAME BXL04AGS (801MS-0140), this motor is the perfect solution. We ensure that all components are brand new and genuine, with direct support from the manufacturer. Our team offers comprehensive advice and technical support to help you with the installation and operation of your new gate motor.

FAAC 413 24V 1044131 Swing Gate Operator

Product Overview The FAAC 413 24V 1044131 is a reliable electromechanical swing gate operator designed for residential and light commercial applications. It serves as a direct replacement for your broken or damaged gate motor. Key Features Designed for above ground installation Suitable for swing gates Max weight per gate: 200kg Max length per gate: 2500mm Max opening angle: 110 degrees Electromechanical motor with mechanically locking method Power supply voltage: 230v Motor voltage: 24v Gate speed: 15 seconds for 90 degrees Duty cycle: Very-Intensive Protection rating: IP44 (resistant to dust and water splashes) Product Details Power Input: 70w Gate Type: Swing Gate Motor Range: 413 Category: Swing Gate Motor Replacement and Support Replace your broken FAAC 413 24V 1044131 swing gate operator with a new, genuine unit directly from the manufacturer. Enjoy full technical support and advice to ensure a smooth installation and operation of your gate system.

FAAC 415 L LS 24V 1044181 Electro-Mechanical Operator for Swing Gates

Product Overview The FAAC 415 L LS 24V 1044181 electro-mechanical swing gate operator is an ideal replacement for damaged or broken gate motors, offering reliable performance and straightforward installation. Key Features Direct replacement for FAAC 415 L LS 24V 1044181 gate motors Suitable for swing gates with a maximum weight of 300kg Maximum gate length per leaf up to 4000mm Above ground installation Maximum opening angle of 110 degrees Electro-mechanical motor for durable and efficient operation Mechanically locking motor ensures secure gate closure Power supply voltage of 230v Motor voltage of 24v Gate speed of 20 seconds for 90 degrees movement Very-intensive duty cycle suitable for high-frequency use IP44 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 415 L LS 24V 1044181 is designed to seamlessly integrate into existing gate setups, providing reliable operation and durability. It is suitable for residential and light commercial applications where performance and longevity are essential.

FAAC 415 L 24V 1044171 Electro-Mechanical Operator for Swing Gates

Product Overview The FAAC 415 L 24V 1044171 electro-mechanical swing gate operator is designed as a direct replacement for damaged or broken gate motors, offering reliable performance and ease of installation. Key Features Direct replacement for FAAC 415 L 24V 1044171 gate motors Suitable for swing gates with a maximum weight of 300kg Maximum gate length per leaf up to 4000mm Above ground installation Maximum opening angle of 110 degrees Electro-mechanical motor for durable and efficient operation Mechanically locking motor for secure gate closure Power supply voltage of 230v Motor voltage of 24v Gate speed of 20 seconds for 90 degrees movement Very-intensive duty cycle suitable for high-frequency use IP44 protection rating for resistance to dust and water ingress Compatibility and Installation The FAAC 415 L 24V 1044171 is designed to fit seamlessly into existing gate installations, providing robust operation and longevity. It is ideal for residential and light commercial applications where reliability and performance are critical.

FAAC S800H ENC SBW 24v 180 Degree - Hydraulic Underground Swing Gate Operator

Product Overview The FAAC S800H ENC SBW 24v 180 Degree is a robust hydraulic underground operator designed specifically for single-leaf swing gates in residential and condominium applications. It supports gate widths of up to 4m and weights of up to 800kg, offering reliable operation and enhanced security. Key Features Hydraulic underground operator for swing gates Integrated magnetic encoder with bus "2easy" for precise gate positioning Integrated positive stops eliminate the need for mechanical stops on the ground FAAC patented hybrid technology combines hydraulic power with electronic control Service release device for manual operation during power outages Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using NO BUS devices Power supply voltage: 230V, Motor voltage: 24V Protection rating: IP67 Operates swing gates with a maximum opening angle of 180 degrees Max gate speed: 11 seconds for 90 degrees Continuous use frequency Technical Specifications Power Input: 60W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Motor: Hydraulic Locking Method: Requires Solenoid Lock Gate Speed: 11 Seconds 90 Degrees Duty Cycle: Very-Intensive Protection Rating: IP67 Motor Range: S800H Category: Swing Gate Motor Applications The FAAC S800H ENC SBW 24v 180 Degree is ideal for automating single-leaf swing gates in residential and condominium settings. Its advanced features ensure smooth operation, durability, and security, making it a reliable choice for homeowners and residents.

CAME Fast70-S24 Kit | Single Swing Gate | Up to 2.3m Width, 200kg per Leaf

Product Overview The CAME Fast70-S24 Kit is a complete solution for single residential or condominium swing gate applications on medium and large-sized pillars. This kit supports gates up to 2.3 meters in width or 200kg in weight per leaf, providing robust and reliable automation for your gate system. Key Features Supports swing gates up to 2.3 meters in width or 200kg per leaf Slow down feature for smooth opening and closing Control panel with LCD display for simplified programming Designed for large pillars with an articulated arm for easy corner access Quick and easy installation to existing hinged swing gates CAME Cloud Technology for remote monitoring and control Product Description The CAME Fast70-S24 Kit integrates advanced features to ensure smooth and efficient gate operation. The slow down feature allows you to adjust the speed of your gate as it approaches the open and closed positions, providing a refined and personalized touch to your installation. The control panel with LCD display simplifies programming and diagnostics, making setup straightforward. This kit is particularly suited for gates with large square pillars, thanks to its articulated arm that can easily reach around the corner without requiring modifications to the bracketry. Quick and easy installation is ensured, allowing you to upgrade your existing hinged swing gates with minimal effort. With CAME Cloud Technology, you can enjoy full control of your gate system from anywhere. Monitor your video entry system, receive audio/video calls, and open your gate remotely using the XIP mobile app, available on the App Store and Google Play. Specifications Model Fast70 24V Protection rating (IP) 54 Power supply (V - 50/60 Hz) 24 DC Absorption (A) 1.4 Power (W) 140 Maneuvering time at 90° (s) 13 ÷ 30 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Kit Content Fast70 24V motor featuring a control board with functions display 1001AF43S: 433.92 MHz plug-in radio frequency card 2806TS-0122: TOPD4RKS - Double frequency 4-button rolling code transmitter, black color 1001TOP-A433N: Antenna tuned at 433.92 MHz 1001DIR10: Pair of 12-24V AC-DC outdoor photocells with a range of 10m Advanced Technology The Fast70-S24 kit features CAME Cloud Technology, allowing you to monitor and control your gate system remotely. Using the XIP mobile app, available on both the App Store and Google Play, you can receive audio/video calls from your entry panel and open your gate from anywhere. Applications This gearmotor kit is suitable for single swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation.

CAME Fast70-P24 Kit | Pair of Swing Gates | Up to 2.3m Width, 200kg per Leaf

Product Overview The CAME Fast70-P24 Kit is a complete solution for residential or condominium swing gate applications on medium and large-sized pillars. This kit supports gates up to 2.3 meters in width or 200kg in weight per leaf, providing robust and reliable automation for your gate system. Key Features Supports swing gates up to 2.3 meters in width or 200kg per leaf Slow down feature for smooth opening and closing Control panel with LCD display for simplified programming Designed for large pillars with an articulated arm for easy corner access Quick and easy installation to existing hinged swing gates CAME Cloud Technology for remote monitoring and control Product Description The CAME Fast70-P24 Kit integrates advanced features to ensure smooth and efficient gate operation. The slow down feature allows you to adjust the speed of your gate as it approaches the open and closed positions, providing a refined and personalized touch to your installation. The control panel with LCD display simplifies programming and diagnostics, making setup straightforward. This kit is particularly suited for gates with large square pillars, thanks to its articulated arm that can easily reach around the corner without requiring modifications to the bracketry. Quick and easy installation is ensured, allowing you to upgrade your existing hinged swing gates with minimal effort. With CAME Cloud Technology, you can enjoy full control of your gate system from anywhere. Monitor your video entry system, receive audio/video calls, and open your gate remotely using the XIP mobile app, available on the App Store and Google Play. Specifications Model Fast70 24V Protection rating (IP) 54 Power supply (V - 50/60 Hz) 24 DC Absorption (A) 1.4 Power (W) 140 Maneuvering time at 90° (s) 13 ÷ 30 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Kit Content Fast70 24V motor featuring a control board with functions display Fast70 24V motor 1001AF43S: 433.92 MHz plug-in radio frequency card 2806TS-0122: TOPD4RKS - Double frequency 4-button rolling code transmitter, black color 1001TOP-A433N: Antenna tuned at 433.92 MHz 1001DIR10: Pair of 12-24V AC-DC outdoor photocells with a range of 10m Advanced Technology The Fast70-P24 kit features CAME Cloud Technology, allowing you to monitor and control your gate system remotely. Using the XIP mobile app, available on both the App Store and Google Play, you can receive audio/video calls from your entry panel and open your gate from anywhere. Applications This gearmotor kit is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation.

CAME Irreversible Fast70 | 24V Gearmotor | For Swing Gates Up to 2.3m

Product Overview The Irreversible Fast70 24V gearmotor features a control board with functions display, making it ideal for swing gates up to 2.3 meters per leaf. This robust automation solution is perfect for residential or condominium applications, especially on medium and large pillars. The gearmotor ensures reliable performance and offers advanced control features for enhanced gate operation. Key Features Irreversible gearmotor with articulated transmission arm Suitable for swing gates up to 2.3 meters per leaf Ideal for residential and condominium applications Can operate in emergency mode during power outages Simplified connection with a single 3-wire cable for motor and encoder management Electronic board with separate terminal blocks and display for easy start-up and diagnosis Storage for up to 250 different users Self-diagnosing safety devices, both wireless and wired Radio programming Rolling code and integrated Key Code (Twin) Devices developed for connection to the cloud via CAME Connect Management of wireless security accessories for the RIO System 2.0 series Direct management of CAME key pads using the R800 board or connection to CAME transponder selectors using the R700 accessory Product Description The Fast70 gearmotor integrates advanced CAME Connect technology, allowing for remote digital control via a gateway or local control through CAME KEY. This feature ensures ease of use and enhanced security for your gate automation system. The Fast70 is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additionally, the Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security. The control board includes terminal blocks, dip switches, and storage for up to 250 users, providing flexible and comprehensive control options. Specifications Specification FA7024 Protection rating (IP) 54 Power supply (V - 50/60 Hz) - Power supply to motor (V) 24 DC Absorption (A) - Power (W) 140 Maneuvering time at 90° (s) 13 ÷ 30 Duty/cycle (%) - Cycles/Hour 65 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) - Advanced Technology The Fast70 gearmotor integrates CAME Connect technology, allowing for remote digital control via a gateway or local control through CAME KEY. This ensures ease of use and enhanced security for your gate automation system. Applications This gearmotor is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additional Information The Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security.

CAME Irreversible Fast70 | 24V Gearmotor | For Swing Gates Up to 2.3m

Product Overview The Irreversible Fast70 24V gearmotor features an articulated drive arm, making it ideal for swing gates up to 2.3 meters per leaf. This robust automation solution is perfect for residential or condominium applications, especially on medium and large pillars. The gearmotor ensures reliable performance and offers advanced control features for enhanced gate operation. Key Features Irreversible gearmotor with articulated drive arm Suitable for swing gates up to 2.3 meters per leaf Ideal for residential and condominium applications Can operate in emergency mode during power outages Simplified connection with a single 3-wire cable for motor and encoder management Electronic board with separate terminal blocks and display for easy start-up and diagnosis Storage for up to 250 different users Self-diagnosing safety devices, both wireless and wired Radio programming Rolling code and integrated Key Code (Twin) Devices developed for connection to the cloud via CAME Connect Management of wireless security accessories for the RIO System 2.0 series Direct management of CAME key pads using the R800 board or connection to CAME transponder selectors using the R700 accessory Product Description The Fast70 gearmotor integrates advanced CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This feature ensures ease of use and enhanced security for your gate automation system. The Fast70 is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additionally, the Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security. The control board includes terminal blocks, dip switches, and storage for up to 250 users, providing flexible and comprehensive control options. Specifications Specification FA7024 Protection rating (IP) 54 Power supply (V - 50/60 Hz) - Power supply to motor (V) 24 DC Absorption (A) 1.4 Power (W) 160 Maneuvering time at 90° (s) 15 Duty/cycle (%) 30 Operating temperature (°C) -20 ÷ +55 Motor’s heat protection (°C) 150 Advanced Technology The Fast70 gearmotor integrates CONNECT technology, allowing for remote digital control via a gateway or local control through CAME KEY. This ensures ease of use and enhanced security for your gate automation system. Applications This gearmotor is suitable for swing gates in residential and condominium settings, particularly on medium and large pillars. Its robust construction and advanced features make it an excellent choice for secure and efficient gate automation. Additional Information The Fast70 gearmotor is designed to operate efficiently even during power outages and is equipped with self-diagnosing safety devices to ensure reliable operation and security.

FAAC 415 LS | 24V Electro Mechanical Motor for Swing Gates

Product Overview The FAAC 415 LS is a high-performance 24V electro mechanical motor designed for swing gates. Available with or without limit switches, in standard or long versions, the 415 LS motor offers reliable and secure gate automation for residential and commercial applications. The 24Vdc power supply ensures high safety standards, while the durable aluminium body provides excellent resistance to atmospheric conditions. Key Features Available with or without limit switches Standard or long versions Equipped with opening and closing limit switches for managing slowdown and stopping points Non-reversing system ensures mechanical locking when the motor is not running Convenient and secure release system for manual operation during power failures 24Vdc power supply for maximum security Double-coated aluminium body for high resistance to atmospheric agents Horizontal cable exit for installations near the ground Optional rod protective housing available for standard 300mm models Product Description The FAAC 415 LS electro mechanical motor is designed to provide reliable and secure automation for swing gates. It is available in both standard and long versions, with optional limit switches to manage the opening and closing cycles effectively. The LS operators are equipped with opening and closing limit switches, allowing precise control of slowdown and stopping points, enhancing the safety and efficiency of the gate operation. Secure and Reliable Operation The non-reversing system of the FAAC 415 LS ensures that the gate is mechanically locked when the motor is not running, providing enhanced security. In the event of a power failure, a convenient and secure release system allows for manual operation of the gate, ensuring continuous access. High Safety Standards The 24Vdc power supply of the FAAC 415 LS guarantees the highest level of safety, making it suitable for both residential and commercial installations. The motor's aluminium body is double-coated to withstand harsh weather conditions, providing long-lasting durability and performance. Installation Flexibility The horizontal cable exit design of the FAAC 415 LS makes it ideal for installations near the ground, ensuring a neat and unobtrusive setup. Additionally, an optional rod protective housing is available for the standard 300mm models, offering extra protection and longevity for the motor components. Specifications Power supply: 24Vdc Available versions: Standard, Long Optional: Opening and closing limit switches Material: Double-coated aluminium body Horizontal cable exit Optional rod protective housing (300mm models) Optional Features Limit switches for managing slowdown and stopping points Rod protective housing for standard 300mm models

CAME ATI 24V A3024N | Swing Gate Operator for Leaves up to 3m | Powerful and Versatile

Product Overview The ATI 24V A3024N is a medium to large-sized swing gate operator designed for gate leaves up to 3 meters. This powerful and versatile operator does not require periodic maintenance, embodying the dependability that CAME is known for. It is a self-locking operator equipped with two end points, ensuring secure and reliable operation. Key Features Self-locking operator with 2 end points 3-year guarantee Controlled impact forces: EN12445 and EN12453 compliant Emergency backup batteries for power blackouts (optional) Low-voltage gearmotor for frequent passages Specifications SpecificationDetails Power Supply 24V Max Gate Leaf Length 3m Guarantee 3 Years Impact Force Control EN12445 and EN12453 compliant Emergency Backup Available Usage Frequency Frequent passages Product Description The ATI 24V A3024N is designed for those who need a robust and reliable swing gate operator for medium to large-sized gates. With its ability to handle gate leaves up to 3 meters in length, this operator is perfect for residential, commercial, and industrial applications. Its self-locking mechanism with two end points ensures that your gate remains securely closed when not in operation. This operator offers controlled impact forces and complies with European standards EN12445 and EN12453, ensuring safety and reliability. Additionally, the ATI 24V A3024N is equipped with an optional emergency backup battery system that activates during power blackouts, ensuring uninterrupted operation. The low-voltage gearmotor guarantees consistent performance even in the harshest of working conditions, making it ideal for apartment blocks and industrial facilities. The ATI 24V A3024N is built to last, requiring no periodic maintenance while delivering consistent performance. With a 3-year guarantee, you can trust in the quality and durability of this CAME product. Order before 2pm for next working day delivery, subject to stock availability.

FAAC S800H ENC CBAC 100 | 24V Underground Hydraulic Operator | Motor Only

Product Overview The FAAC S800H ENC CBAC 100 is a 24V hydraulic underground operator designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This robust operator is ideal for continuous use, providing reliable and efficient gate automation with advanced features. Key Features 24V hydraulic underground operator for swing-leaf gates. Suitable for gates with single-leaf width up to 2 meters. Continuous use frequency for high-performance operation. Integrated magnetic encoder with bus "2easy" (non-polarized two-wire connection). Integrated positive stops, eliminating the need for mechanical stops on the ground. FAAC patented hybrid technology for enhanced performance. Service release device for easy maintenance. Integrated handles for easier installation and handling. Option to add BUS XIB interface for applications using NO BUS devices. 2-year guarantee for peace of mind. Product Description FAAC S800H ENC CBAC 100 | 24V Underground Hydraulic Operator | Motor Only The FAAC S800H ENC CBAC 100 is a cutting-edge 24V hydraulic underground operator designed for swing-leaf gates in residential and condominium settings. This operator is capable of handling gates with a single-leaf width of up to 2 meters and is built for continuous use, ensuring consistent and reliable performance. The S800H ENC CBAC 100 features an integrated magnetic encoder with bus "2easy" technology, which utilizes a non-polarized two-wire connection for simplified installation and enhanced communication. The operator also includes integrated positive stops, eliminating the need for additional mechanical stops on the ground. FAAC's patented hybrid technology is incorporated into this operator, providing superior performance and durability. The service release device allows for easy maintenance, while the integrated handles facilitate installation and handling. Additionally, the operator can be equipped with a BUS XIB interface for compatibility with NO BUS devices. Technical Specifications SpecificationDetails Power Supply 24V Application Residential and Condominium Swing-Leaf Gates Max Gate Leaf Width 2 meters Use Frequency Continuous Integrated Encoder Magnetic with bus "2easy" Integrated Positive Stops Yes Technology FAAC Patented Hybrid Service Release Device Yes Handles Integrated for Easy Installation and Handling Optional Interface BUS XIB for NO BUS Devices Guarantee 2 Years Part Number 108720 The FAAC S800H ENC CBAC 100 is an excellent choice for those looking to replace or upgrade their current gate operator, offering advanced features, easy installation, and reliable performance for residential and condominium gates.

FAAC S800H ENC CBAC 180 | 24V Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800H ENC CBAC 180 is a 24V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 2 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 24V hydraulic underground operator motor Suitable for swing gates up to 2 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Product Description The FAAC S800H ENC CBAC 180 is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 2 meters in length. This 24V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800H ENC CBAC 180 offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800H ENC CBAC 180 24V hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC S800H ENC SBW 24V 100° | Underground Hydraulic Operator Motor Only for Swing Gates

Product Overview The FAAC S800H ENC SBW 100° is a 24V hydraulic underground operator motor designed for residential and condominium swing-leaf gates with a single-leaf width of up to 4 meters. This motor is engineered for continuous use and features an integrated magnetic encoder with a bus "2easy" non-polarized two-wire connection, making it highly efficient and reliable for frequent operations. Key Features 24V hydraulic underground operator motor Suitable for swing gates up to 4 meters per leaf Continuous use frequency for high-traffic applications Integrated magnetic encoder with bus "2easy" connection Integrated positive stops, eliminating the need for ground stops FAAC patented hybrid technology Service release device for manual operation during power failures Integrated handles for easier installation and handling Option to add BUS XIB interface for applications using non-BUS devices 2-year guarantee on the motor Technical Specifications Power Input: 60W Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 4000mm Above Or Underground: Underground Max Opening Angle: 100 Degrees Motor: Hydraulic Locking Method: Requires Solenoid Lock Power Supply Voltage: 230V Motor Voltage: 24V Gate Speed: 11 Seconds to 90 Degrees Duty Cycle: Very-Intensive Protection Rating: IP 67 Motor Range: S800H Category: Swing Gate Motor Product Description The FAAC S800H ENC SBW 24V 100° is designed to provide robust and reliable automation for residential and condominium swing gates with leaves up to 4 meters in length. This 24V hydraulic motor is ideal for continuous use, making it perfect for high-traffic areas. The integrated magnetic encoder with bus "2easy" connection ensures precise and efficient operation, while the integrated positive stops eliminate the need for additional mechanical stops on the ground. This motor features FAAC's patented hybrid technology, combining the benefits of hydraulic and electronic systems for enhanced performance and reliability. The service release device allows for manual operation during power failures, ensuring continued access and security. Integrated handles make the motor easier to install and handle, reducing installation time and effort. For applications using non-BUS devices, the FAAC S800H ENC SBW 24V 100° offers the option to add a BUS XIB interface, providing greater flexibility and compatibility. With its comprehensive features and robust construction, this motor offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC S800H ENC SBW 24V 100° hydraulic motor Installation manual and hardware Note: This product is the motor only. Control board, photocells, and remote transmitters are not included and must be purchased separately.

FAAC Underground hydraulic operator double kit S800 SB KIT

2 Year guarantee

FAAC Underground hydraulic operator single kit S800 SB KIT S

2 Year guarantee

FAAC Low voltage gearmotor for sliding gates C720

2 Year guarantee

FAAC Low voltage gearmotor for sliding gates C721 24v

2 Year guarantee

FAAC C720 UK KIT | Low Voltage Gearmotor Sliding Gate Kit for Gates Up to 400kg

Product Overview The FAAC C720 UK KIT is a comprehensive low voltage gearmotor sliding gate kit designed for residential gates with a maximum weight of 400kg per leaf. This kit includes all necessary components for effective and efficient gate automation, featuring intensive use capability and built-in obstacle detection for enhanced safety. The integrated open and close limits allow for precise control of gate travel. Key Features Sliding gate operator kit for residential use Suitable for gates up to 400kg per leaf Designed for intensive use Built-in obstacle detection for safety Integrated open and close limits for precise control Quick and easy installation Includes motor, control panel, photocells, receiver, and transmitters Product Description The FAAC C720 UK KIT is designed to provide robust and reliable automation for residential sliding gates up to 400kg in weight per leaf. This kit includes a powerful 24V low voltage gearmotor that ensures smooth and efficient gate operation. The motor is specifically designed for intensive use, making it ideal for shared entrance gates to a large number of residences, ensuring comfort and convenience for numerous visitors throughout the day. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. The integrated open and close limits feature allows you to set the limits of the gate travel without the need for a physical stop in the ground, providing a refined and personalized touch to each application. This kit is designed for quick and easy installation, making it suitable for residential applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC C720 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x Motor and control panel 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC C721 UK KIT | Low Voltage Gearmotor Sliding Gate Kit for Gates Up to 800kg

Product Overview The FAAC C721 UK KIT is a comprehensive low voltage gearmotor sliding gate kit designed for residential or light commercial gates with a maximum weight of 800kg per leaf. This kit includes all necessary components for effective and efficient gate automation, featuring intensive use capability and built-in obstacle detection for enhanced safety. The integrated open and close limits allow for precise control of gate travel. Key Features Sliding gate operator kit for residential or light commercial use Suitable for gates up to 800kg per leaf Designed for intensive use Built-in obstacle detection for safety Integrated open and close limits for precise control Quick and easy installation Includes motor, control panel, photocells, receiver, and transmitters Product Description The FAAC C721 UK KIT is designed to provide robust and reliable automation for residential or light commercial sliding gates up to 800kg in weight per leaf. This kit includes a powerful 24V low voltage gearmotor that ensures smooth and efficient gate operation. The motor is specifically designed for intensive use, making it ideal for shared entrance gates to a large number of residences, ensuring comfort and convenience for numerous visitors throughout the day. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. The integrated open and close limits feature allows you to set the limits of the gate travel without the need for a physical stop in the ground, providing a refined and personalized touch to each application. This kit is designed for quick and easy installation, making it suitable for residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC C721 UK KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x Motor and control panel 1 x Pair of photocells 1 x Plug-in receiver/decoder 2 x Two-channel remote transmitters Installation manual and hardware

FAAC D1000 | Electro-Mechanical Operator for Garage Doors

Product Overview The FAAC D1000 is an electro-mechanical operator designed for sectional doors or spring/counterbalanced up-and-over doors. Suitable for both residential and condominium use, this operator provides reliable and efficient automation for garage doors. The D1000 features quick and simple installation with a pre-installed rail and rotation coupling, ensuring a hassle-free setup. Key Features Electro-mechanical operator for sectional and up-and-over doors Suitable for residential and condominium use Quick and simple installation with pre-installed rail Chain/belt transmission for quiet operation Adjustable travel limit with electronic slow-down Non-reversing facility eliminates the need for locks and bolts Bi-stable release device (patented) Anti-crushing device conforms to European Directives No need for a safety edge Product Details The FAAC D1000 is designed to provide robust and reliable automation for sectional doors or spring/counterbalanced up-and-over doors. This electro-mechanical operator is perfect for both residential and condominium settings. The non-reversing facility ensures that there is no need to install additional locks and bolts, enhancing security and convenience. The bi-stable release device, a patented feature, and the anti-crushing device ensure that the automated system meets European safety standards. The quick and simple installation process is facilitated by the pre-installed rail and rotation coupling, requiring no tools. Additionally, the D1000 now features a quiet belt transmission as standard, reducing noise to 45 dB(A) during operation. The adjustable travel limit with electronic slow-down allows for precise control of the door's movement, providing a refined and smooth operation. With a maximum thrust of 1000N and a power input of 350W, the FAAC D1000 offers powerful and efficient performance for various garage door types. Technical Specifications Max Thrust: 1000N Power: 350W Carriage Speed: 6.6 m/min Noise: 45 dB(A) FAAC - Simply automatic. What's in the Box: 1 x FAAC D1000 Electro-Mechanical Operator Installation manual and hardware Note: This product is the motor only. Additional components may be required for full installation.

FAAC Electro mechanical Belt driven operator for garage doors - Full kit D600 B UK

2 Year guarantee For up to 60Kg garage doors

FAAC Electro mechanical driven operator for garage doors - Full kit D1000 B KIT

2 Year guarantee For up to 100Kg garage doors

FAAC 415 L LS 24V KIT S | Electro Mechanical Operator Single Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L LS 24V KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, a battery backup for mains power failures, and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 24V electro-mechanical motor with limit switch Battery backup available for power failures Slow down on open and close for precise operation Built-in obstacle detection for safety Quick and easy installation Includes motor, control board, photocells, receiver, and transmitters Product Description The FAAC 415 L LS 24V KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 24V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L LS 24V KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 L LS 24V DC Operator 1 x FAAC E124 Control Board 1 x FAAC XF 868 SLH Receiver 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20B D Pair of Photocells Installation manual and hardware

FAAC 415 L LS 24V KIT | Electro Mechanical Operator Double Long Limit Switch Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L LS 24V KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, a battery backup for mains power failures, and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 24V electro-mechanical motors with limit switch Battery backup available for power failures Slow down on open and close for precise operation Built-in obstacle detection for safety Quick and easy installation Bus connection for peripherals with 2-wire non-polarized system Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC 415 L LS 24V KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 24V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The control panel includes bus terminals for the connection of photocells and accessories with a 2-wire non-polarized wiring system, speeding up the installation process and preventing errors. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L LS 24V KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V electro-mechanical motors 1 x Control board 1 x Pair of photocells 1 x XF868 receiver 2 x Two-channel remote transmitters Installation manual and hardware

FAAC Electro mechanical operator for swing gates S418

FAAC S418 24v 104301 Looking to replace a broken FAAC S418 24v 104301. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 24v electro mechanical operator single kit for swing gates S418 UK KITS

2 Year guarantee

FAAC 24v electro mechanical operator double kit for swing gates S418 UK KIT

2 Year guarantee

FAAC 24v hydraulic operator single kit for swing gates S450 UK KITS

2 Year guarantee

FAAC S450 UK KIT 24V | Hydraulic Operator Double Kit for Swing Gates Up to 2m

Product Overview The FAAC S450 UK KIT 24V is a comprehensive hydraulic operator double kit designed for residential swing gates with leaves up to 2 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring opening and closing hydraulic locks for enhanced security. Designed for intensive use, this kit is ideal for shared entrance gates to multiple residences, ensuring durability and reliability with every operation. Key Features Double operator kit for swing gates Suitable for gates up to 2 meters per leaf Strong and durable hydraulic motors Built for intensive use Built-in obstacle detection for safety Quick and easy installation Bus connection for peripherals with 2-wire non-polarized system 3-year warranty on all FAAC electrical components Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC S450 UK KIT 24V is designed to provide robust and reliable automation for double swing gates up to 2 meters in length per leaf. This kit includes powerful hydraulic motors that ensure smooth and efficient gate operation. The opening and closing hydraulic locks offer enhanced security, making this kit ideal for intensive use in residential settings with numerous visitors throughout the day. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The control panel includes bus terminals for the connection of photocells and accessories with a 2-wire non-polarized wiring system, speeding up the installation process and preventing errors. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC S450 UK KIT 24V offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x FAAC S450H CBAC 24V Operators 1 x FAAC E124 Control Board 1 x FAAC XF 868 SLH Receiver 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20BD Pair of Photocells Installation manual and hardware

FAAC Underground electro mechanical operator 770N 24V

FAAC 770N 24V 10675301 Looking to replace a broken FAAC 770N 24V 10675301. This item can be used as a direct replacement for your broken or damaged gate motor. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and techincal support to aid you in getting your installation back up and running.

FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty

Product Overview The FAAC 770 24V UK is a high-performance underground electro-mechanical operator double kit, designed for heavy-duty gate automation. This kit is ideal for aluminum gate installations, providing robust and reliable operation for residential and commercial applications. The FAAC 770 24V UK kit includes all necessary components for a complete and efficient installation. Key Features Heavy duty automation suitable for aluminum gates. 24V underground electro-mechanical operator. Includes two motors and two foundation boxes. Comes with a control board and control board housing. Pair of photocells for enhanced safety. Plug-in receiver/decoder for easy integration. Two 2-channel remote transmitters for convenient control. 2-year guarantee for peace of mind. Product Description FAAC 770 24V UK | Underground Electro-Mechanical Operator Double Kit | Heavy Duty The FAAC 770 24V UK kit is a comprehensive solution for automating aluminum gates with underground electro-mechanical operators. This heavy-duty kit ensures reliable and efficient operation, making it suitable for both residential and commercial gate installations. The 24V system provides smooth and powerful performance, while the included components ensure a complete and hassle-free setup. This kit includes two motors and two foundation boxes, ensuring a secure and stable installation for your gates. The control board and control board housing provide centralized control and easy access for maintenance and adjustments. The included pair of photocells enhances safety by detecting obstacles, preventing accidents during gate operation. The plug-in receiver/decoder allows for seamless integration with your existing gate automation system, while the two 2-channel remote transmitters offer convenient control of your gates from a distance. The FAAC 770 24V UK kit is designed to deliver reliable performance and durability, backed by a 2-year guarantee for added assurance. Kit Components 2 x Motors: Underground electro-mechanical motors for robust operation. 2 x Foundation Boxes: Secure foundation boxes for stable installation. 1 x Control Board: Centralized control unit for efficient management. 1 x Control Board Housing: Protective housing for the control board. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x Plug-in Receiver/Decoder: For easy integration with automation systems. 2 x 2-Channel Remote Transmitters: Remote controls for convenient operation. Technical Specifications SpecificationDetails Power Supply 24V Application Aluminum Gates Motor Type Electro-Mechanical Installation Type Underground Guarantee 2 Years The FAAC 770 24V UK kit provides a reliable and efficient solution for automating your aluminum gates, ensuring smooth and secure operation with advanced features and robust components.

FAAC 770 24V KIT S | Underground Electro-Mechanical Operator Single Kit | Heavy Duty

Product Overview The FAAC 770 24V KIT S is a high-performance underground electro-mechanical operator single kit, designed for heavy-duty gate automation. This kit is renowned for FAAC's reliability and is suitable for residential and commercial applications. The FAAC 770 24V KIT S includes all essential components for a complete and efficient gate automation installation. Key Features Heavy duty electro-mechanical operation for robust performance. 24V underground operator for efficient gate automation. FAAC reliability ensuring long-lasting operation. Includes motor, foundation box, and control board. Comes with control board housing for protection. Pair of photocells for enhanced safety. Plug-in receiver/decoder for seamless integration. Two 2-channel remote transmitters for convenient control. 2-year guarantee for peace of mind. Product Description FAAC 770 24V KIT S | Underground Electro-Mechanical Operator Single Kit | Heavy Duty The FAAC 770 24V KIT S is an advanced underground electro-mechanical operator single kit designed to provide reliable and efficient automation for gates. This heavy-duty kit is perfect for both residential and commercial installations, offering the renowned reliability of FAAC products. The 24V system ensures smooth and powerful performance, making it an excellent choice for robust gate automation. This comprehensive kit includes a motor, foundation box, control board, and control board housing, ensuring you have all the necessary components for a successful installation. The included pair of photocells enhances safety by detecting obstacles, preventing accidents during gate operation. The plug-in receiver/decoder allows for seamless integration with your existing gate automation system, while the two 2-channel remote transmitters offer convenient control of your gates from a distance. Backed by a 2-year guarantee, the FAAC 770 24V KIT S provides reliable performance and peace of mind. Kit Components 1 x Motor: Underground electro-mechanical motor for robust operation. 1 x Foundation Box: Secure foundation box for stable installation. 1 x Control Board: Centralized control unit for efficient management. 1 x Control Board Housing: Protective housing for the control board. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x Plug-in Receiver/Decoder: For easy integration with automation systems. 2 x 2-Channel Remote Transmitters: Remote controls for convenient operation. Technical Specifications SpecificationDetails Power Supply 24V Operation Electro-Mechanical Application Residential and Commercial Gates Installation Type Underground Guarantee 2 Years The FAAC 770 24V KIT S is a reliable and efficient solution for automating your gates, ensuring smooth and secure operation with advanced features and robust components.

FAAC 391 UK KIT S | Electro mechanical operator with articulated arm for swing gates

Product Overview The 391 UK KIT S is a comprehensive 24V electromechanical operator kit designed for swing gates with leaves up to 2.5 meters. This kit includes everything needed for efficient and reliable gate automation, featuring an articulated arm, control board, remote transmitters, and photocells. The 391 UK KIT S ensures smooth and secure operation of your swing gates, making it ideal for residential and commercial applications. Key Features 24V electromechanical operator for swing gates up to 2.5 meters Articulated arm for flexible and efficient movement Includes control board for seamless operation Comes with two-channel remote transmitters Includes a pair of photocells for enhanced safety Product Description The 391 UK KIT S is engineered to provide robust and efficient automation for swing gates. This kit features a 24V electromechanical operator with an articulated arm, ensuring smooth and flexible gate movement. The included control board facilitates seamless integration and operation of the system. The kit also comes with two-channel remote transmitters, allowing for convenient and secure gate control. The included pair of photocells enhances safety by detecting obstacles in the gate's path, preventing accidents and ensuring reliable operation. Designed for swing gates with leaves up to 2.5 meters, the 391 UK KIT S is suitable for both residential and commercial properties. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x 391 Motor with Articulated Arm 1x Control Board 1x XF 868 Receiver 2x Two-Channel Remote Transmitters 1x Pair of Photocells Technical Specifications Product Code: 391 UK KIT S Power Supply: 24V Gate Type: Swing Gates Max Gate Leaf Length: 2.5 meters Includes: Motor with Articulated Arm, Control Board, XF 868 Receiver, Remote Transmitters, Photocells Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC Electro mechanical operator with articulated arm for swing gates 391 UK KIT

2 Year guarantee FAAC Gate Automation perfect for offset installations A great option for Aluminium Gate installations  

FAAC 390 UK KIT S | Electro Mechanical Operator with Articulated Arm for Swing Gates

Product Overview The FAAC 390 UK KIT S is a comprehensive electro mechanical operator kit designed for single residential swing gates with leaves up to 3 meters each. This complete kit includes everything needed for efficient and reliable gate automation, featuring an articulated arm, control board with LCD, remote transmitters, and photocells. The FAAC 390 UK KIT S ensures smooth and secure operation of your swing gates, making it ideal for residential applications. Key Features Electro mechanical operator for swing gates up to 3 meters Articulated arm for flexible and efficient movement Adjustable open and close limits Control board with LCD for simplified programming Designed for large pillars Quick and easy installation Manual release from outside in the event of power failure Product Description The FAAC 390 UK KIT S is engineered to provide robust and efficient automation for single residential swing gates. This kit features an electro mechanical operator with an articulated arm, ensuring smooth and flexible gate movement. The adjustable open and close limits allow you to set precise travel limits without the need for physical stops in the ground, making installation easier and more convenient. Specially designed for gates with large square pillars, the articulated arm can easily reach around the corner of the pillar without the need to modify the supplied bracketry. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a manual release feature, allowing access from outside the property in the event of a power failure or fault. This is particularly useful when the gate is the only means of access to the property. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x 390 Motor and Articulated Arm 1x 452 Control Board 1x Control Board Housing 1x Plug-in Receiver/Decoder 2x Two-Channel Transmitters 1x Pair of Photocells Technical Specifications Product Code: FAAC 390 UK KIT S Power Supply: 24V Gate Type: Swing Gates Max Gate Leaf Length: 3 meters Includes: Motor with Articulated Arm, Control Board, Receiver/Decoder, Remote Transmitters, Photocells Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 390 24V KIT | Electro Mechanical Twin Kit with Articulated Arm for Swing Gates

Product Overview The FAAC 390 24V KIT is a comprehensive electro mechanical twin kit designed for automating a pair of residential swing gates with leaves up to 3 meters each. This complete kit includes two 24V motors with articulated arms, a control board with bus connection for peripherals, remote transmitters, and photocells. The FAAC 390 24V KIT ensures smooth, secure, and efficient operation of your swing gates, making it ideal for residential applications. Key Features Electro mechanical operator for twin swing gates up to 3 meters each Articulated arms for flexible and efficient movement Battery backup for operation during mains power failure Adjustable open and close limits Built-in obstacle detection for enhanced safety Designed for large square pillars Quick and easy installation Bus connection for peripherals with easy 2-wire system Manual release from outside in the event of power failure Product Description The FAAC 390 24V KIT is engineered to provide robust and efficient automation for twin residential swing gates. This kit features two 24V electro mechanical operators with articulated arms, ensuring smooth and flexible gate movement. The adjustable open and close limits allow you to set precise travel limits without the need for physical stops in the ground, making installation easier and more convenient. Specially designed for gates with large square pillars, the articulated arms can easily reach around the corner of the pillars without the need to modify the supplied bracketry. The control board includes a bus connection for peripherals, facilitating quick and error-free installation with a simple 2-wire non-polarized system. The built-in obstacle detection feature enhances safety by stopping and reversing the gate upon detecting an obstacle. This feature is crucial for preventing accidents and ensuring reliable operation. The kit also includes a manual release mechanism, allowing access from outside the property in the event of a power failure or fault, which is particularly useful when the gate is the only means of access to the property. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 2x FAAC 390 24V Motors with Articulated Arms 1x FAAC E124 Control Board 1x FAAC XF868 SLH Receiver 2x FAAC 868 SLH Two-Channel Transmitters 1x FAAC XP 20BD Pair of Photocells Technical Specifications Product Code: FAAC 390 24V KIT Power Supply: 24V Gate Type: Twin Swing Gates Max Gate Leaf Length: 3 meters Includes: Motors with Articulated Arms, Control Board, Receiver, Remote Transmitters, Photocells Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 LS | 24V Electro-Mechanical Operator for Swing Gates | Motor Only

Product Overview The FAAC 413 LS is a 24V electro-mechanical operator designed for swing gates, offering reliable and efficient performance. This motor is an ideal replacement for broken or damaged FAAC 413 LS 24V 1044141 gate motors. All our gate motors are brand new, genuine, and sourced directly from the manufacturer in the UK. We provide full technical support to assist you in getting your installation back up and running smoothly. Key Features Suitable for swing gates. 24V electro-mechanical operator for robust performance. Direct replacement for FAAC 413 LS 24V 1044141 models. Genuine FAAC product with manufacturer support. Includes full technical support for installation and setup. Brand new motor ensuring optimal performance and reliability. Product Description FAAC 413 LS | 24V Electro-Mechanical Operator for Swing Gates | Motor Only The FAAC 413 LS is a robust and reliable 24V electro-mechanical operator designed to automate swing gates. This motor serves as a direct replacement for the FAAC 413 LS 24V 1044141, making it a perfect choice for those looking to replace their existing gate motor with a high-quality, genuine FAAC product. Our FAAC 413 LS motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a product that meets the highest standards of quality and performance. The motor is designed for easy installation and integration into your existing gate automation system, with full technical support available to assist you every step of the way. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Operation Electro-Mechanical Replacement For FAAC 413 LS 24V 1044141 Condition Brand New Manufacturer FAAC For those looking to replace their existing FAAC 413 LS gate motor, this 24V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

FAAC 413 24V KIT S | Electro Mechanical Operator Single Kit for Swing Gates

Product Overview The FAAC 413 24V KIT S is a comprehensive electro mechanical operator kit designed for single residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes a 24V DC motor, control board, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 24V KIT S is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 24V DC electro mechanical operator for swing gates up to 2.5 meters Battery backup available for operation during mains power failure Adjustable open and close limits Built-in obstacle detection for enhanced safety Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 24V KIT S is designed to provide robust and efficient automation for single swing gates. This 24V DC electro mechanical operator kit includes a motor capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gate, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The built-in obstacle detection feature enhances safety by stopping and reversing the gate upon detecting an obstacle. This feature is crucial for preventing accidents and ensuring reliable operation. The kit also includes a manual release mechanism, allowing access from outside the property in the event of a power failure or fault. This is particularly useful when the gate is the only means of access to the property. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 24V KIT S is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x FAAC 413 24V DC Operator 1x FAAC E124 Control Board 1x FAAC XF 868 SLH Receiver 2x FAAC 868 SLH Two-Channel Transmitters 1x FAAC XP 20B D Pair of Photocells Technical Specifications Product Code: FAAC 413 24V KIT S Power Supply: 230V Motor Voltage: 24V DC Gate Type: Single Swing Gate Max Gate Leaf Length: 2.5 meters Max Gate Leaf Weight: 200kg Max Opening Angle: 110 degrees Gate Speed: 15 seconds per 90 degrees Duty Cycle: Very intensive Protection Rating: IP44 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 24V KIT | Electro Mechanical Double Operator Kit for Swing Gates

Product Overview The FAAC 413 24V KIT is a comprehensive electro mechanical double operator kit designed for automating a pair of residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes two 24V DC motors, a control board, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 24V KIT is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 24V DC electro mechanical operator for swing gates up to 2.5 meters each Battery backup available for operation during mains power failure Adjustable open and close limits Built-in obstacle detection for enhanced safety Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Product Description The FAAC 413 24V KIT is designed to provide robust and efficient automation for double swing gates. This 24V DC electro mechanical operator kit includes two motors capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gates, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The built-in obstacle detection feature enhances safety by stopping and reversing the gate upon detecting an obstacle. This feature is crucial for preventing accidents and ensuring reliable operation. The kit also includes a manual release mechanism, allowing access from outside the property in the event of a power failure or fault. This is particularly useful when the gate is the only means of access to the property. The control board simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 24V KIT is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 2x FAAC 413 24V DC Motors 1x Control Board 1x Pair of Photocells 1x XF868 Receiver 2x Two-Channel Remote Transmitters Technical Specifications Product Code: FAAC 413 24V KIT Power Supply: 230V Motor Voltage: 24V DC Gate Type: Double Swing Gates Max Gate Leaf Length: 2.5 meters Max Gate Leaf Weight: 200kg Max Opening Angle: 110 degrees Gate Speed: 15 seconds per 90 degrees Duty Cycle: Very intensive Protection Rating: IP44 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 LS 24V KIT S | Electro Mechanical Operator Single Limit Switch Kit for Swing Gates

Product Overview The FAAC 413 LS 24V KIT S is a comprehensive electro mechanical operator kit designed for single residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes a 24V DC motor with limit switches, a control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 LS 24V KIT S is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 24V DC electro mechanical operator for swing gates up to 2.5 meters Battery backup available for operation during mains power failure Adjustable open and close limits Built-in obstacle detection for enhanced safety Slow down on open and close for smooth operation Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Control board with LCD for simplified programming Product Description The FAAC 413 LS 24V KIT S is designed to provide robust and efficient automation for single swing gates. This 24V DC electro mechanical operator kit includes a motor capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gate, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The built-in obstacle detection feature enhances safety by stopping and reversing the gate upon detecting an obstacle. This feature is crucial for preventing accidents and ensuring reliable operation. The kit also includes a manual release mechanism, allowing access from outside the property in the event of a power failure or fault. This is particularly useful when the gate is the only means of access to the property. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The slow down feature on open and close ensures smooth and controlled movement, improving the overall installation and providing a personalized touch to each application. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The FAAC 413 LS 24V KIT S is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 1x FAAC 413 LS 24V DC Operator 1x FAAC E124 Control Board 1x FAAC XF 868 SLH Receiver 2x FAAC 868 SLH Two-Channel Transmitters 1x FAAC XP 20B D Pair of Photocells Technical Specifications Product Code: FAAC 413 LS 24V KIT S Power Supply: 230V Motor Voltage: 24V DC Gate Type: Single Swing Gate Max Gate Leaf Length: 2.5 meters Max Gate Leaf Weight: 200kg Max Opening Angle: 110 degrees Gate Speed: 15 seconds per 90 degrees Duty Cycle: Very intensive Obstacle Detection: Built-in Protection Rating: IP44 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 413 LS 24V KIT | Electro Mechanical Operator Double Limit Switch Kit for Swing Gates

Product Overview The FAAC 413 LS 24V KIT is a comprehensive electro mechanical double operator kit designed for automating a pair of residential and light commercial swing gates with leaves up to 2.5 meters each. This complete kit includes two 24V DC motors with limit switches, a control board with LCD, remote transmitters, and photocells, ensuring efficient and reliable operation of your swing gates. The FAAC 413 LS 24V KIT is engineered for quick and easy installation, making it an ideal choice for upgrading your gate automation system. Key Features 24V DC electro mechanical operator for swing gates up to 2.5 meters each Battery backup available for operation during mains power failure Adjustable open and close limits Built-in obstacle detection for enhanced safety Slow down on open and close for smooth operation Quick and easy installation for existing hinged swing gates Includes photocells and remote transmitters for complete automation Control board with LCD for simplified programming Bus connection for peripherals with easy 2-wire non-polarized wiring system Product Description The FAAC 413 LS 24V KIT is designed to provide robust and efficient automation for double swing gates. This 24V DC electro mechanical operator kit includes two motors capable of handling gate leaves up to 2.5 meters in length. The integrated adjustable open and close limits allow you to set precise travel limits for the gates, eliminating the need for physical stops in the ground. However, for gates over 1.8 meters in width, it is advisable to consult us to ensure this feature meets your installation needs. The built-in obstacle detection feature enhances safety by stopping and reversing the gate upon detecting an obstacle. This feature is crucial for preventing accidents and ensuring reliable operation. The kit also includes a manual release mechanism, allowing access from outside the property in the event of a power failure or fault. This is particularly useful when the gate is the only means of access to the property. The control board with LCD simplifies programming and operation, providing a user-friendly interface for setup and adjustments. The slow down feature on open and close ensures smooth and controlled movement, improving the overall installation and providing a personalized touch to each application. The kit also includes a pair of photocells for enhanced safety, ensuring the gate stops and reverses if an obstacle is detected in its path. The remote transmitters allow for convenient control of the gate from a distance. The bus connection for peripherals with an easy 2-wire non-polarized wiring system speeds up the installation process and prevents errors, allowing for serial or parallel connections as needed. The FAAC 413 LS 24V KIT is designed for quick and easy installation on existing hinged swing gates. This kit is suitable for both residential and light commercial applications, providing reliable and efficient gate automation. For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives PDF before purchasing and installing the product to ensure compliance with all safety standards and guidelines. What Comes in the Box 2x FAAC 413 LS 24V DC Motors 1x FAAC E124 Control Board 1x FAAC XF 868 SLH Receiver 2x FAAC 868 SLH Two-Channel Transmitters 1x FAAC XP 20BD Pair of Photocells Technical Specifications Product Code: FAAC 413 LS 24V KIT Power Supply: 230V Motor Voltage: 24V DC Gate Type: Double Swing Gates Max Gate Leaf Length: 2.5 meters Max Gate Leaf Weight: 200kg Max Opening Angle: 110 degrees Gate Speed: 15 seconds per 90 degrees Duty Cycle: Very intensive Obstacle Detection: Built-in Protection Rating: IP44 Installation and Safety Please ensure that you read the CAME Automative Barrier Directives PDF before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.

FAAC 415 24V KIT S | Electro Mechanical Operator Single Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 24V KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a battery backup for mains power failures and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 24V electro-mechanical motor Battery backup available for power failures Built-in obstacle detection for safety Quick and easy installation Includes motor, control board, photocells, receiver, and transmitters Product Description The FAAC 415 24V KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 24V electro-mechanical motor that ensures smooth and efficient gate operation. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 24V KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 24V electro-mechanical motor 1 x Control board 1 x Pair of photocells 1 x XF868 receiver 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 415 24V KIT | Electro-Mechanical Operator Double Kit | Swing Gates Up to 3m

Product Overview The FAAC 415 24V KIT is a high-quality electro-mechanical operator double kit designed for automating swing gates up to 3 meters. Known for FAAC reliability, this kit ensures smooth and efficient operation, making it an ideal choice for aluminum gate installations. The FAAC 415 24V KIT includes all necessary components for a comprehensive gate automation system. Key Features Electro-mechanical operation for robust performance. Hydraulic operation for smooth and efficient movement. Suitable for swing gates up to 3 meters. Includes two motors for double gate automation. Comes with a control board for centralized control. Pair of photocells for enhanced safety. XF868 receiver for reliable communication. Two 2-channel remote transmitters for convenient gate control. 2-year guarantee for peace of mind. Product Description FAAC 415 24V KIT | Electro-Mechanical Operator Double Kit | Swing Gates Up to 3m The FAAC 415 24V KIT is designed to provide reliable and efficient automation for swing gates up to 3 meters. This electro-mechanical operator kit ensures smooth operation with its hydraulic system, making it a perfect solution for residential and commercial aluminum gate installations. Known for FAAC's reliability, this kit guarantees long-lasting performance and ease of use. This comprehensive kit includes two motors, a control board, a pair of photocells, an XF868 receiver, and two 2-channel remote transmitters, providing everything needed for a complete gate automation setup. The control board offers centralized management of the system, while the photocells enhance safety by detecting obstacles and preventing accidents during gate operation. The XF868 receiver ensures reliable communication between the remote transmitters and the gate system, allowing for easy and convenient control of the gates. With a 2-year guarantee, the FAAC 415 24V KIT provides peace of mind and reliable performance for your gate automation needs. Kit Components 2 x Motors: Electro-mechanical motors for robust and smooth operation. 1 x Control Board: Centralized control unit for efficient management. 1 x Pair of Photocells: Safety sensors for obstacle detection. 1 x XF868 Receiver: Reliable receiver for communication with remote transmitters. 2 x 2-Channel Remote Transmitters: Remote controls for convenient gate operation. Technical Specifications SpecificationDetails Power Supply 24V Operation Electro-Mechanical with Hydraulic System Gate Compatibility Swing Gates Up to 3m Application Residential and Commercial Aluminum Gates Guarantee 2 Years The FAAC 415 24V KIT provides a reliable and efficient solution for automating your swing gates, ensuring smooth and secure operation with advanced features and robust components.

FAAC 415 LS 24V KIT S 24v electro mechanical operator single limit switch kit for swing gates up to 3m, Kit includes 1x motor 1x control board 1x pair of photocells 1x XF868 receiver 2x two channel remote transmitters

Product Overview The FAAC 415 LS 24V KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 3 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, a battery backup for mains power failures, and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 3 meters per leaf 24V electro-mechanical motor with limit switch Battery backup available for power failures Slow down on open and close for precise operation Built-in obstacle detection for safety Quick and easy installation Includes motor, control board, photocells, receiver, and transmitters Product Description The FAAC 415 LS 24V KIT S is designed to provide robust and reliable automation for single swing gates up to 3 meters in length per leaf. This kit includes a powerful 24V electro-mechanical motor with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS 24V KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x 24V electro-mechanical motor 1 x Control board 1 x Pair of photocells 1 x XF868 receiver 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 415 LS 24V KIT | Electro Mechanical Operator Double Limit Switch Kit for Swing Gates Up to 3m

Product Overview The FAAC 415 LS 24V KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 3 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a limit switch for precise control, a battery backup for mains power failures, and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 3 meters per leaf 24V electro-mechanical motors with limit switch Battery backup available for power failures Slow down on open and close for precise operation Built-in obstacle detection for safety Quick and easy installation Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC 415 LS 24V KIT is designed to provide robust and reliable automation for double swing gates up to 3 meters in length per leaf. This kit includes powerful 24V electro-mechanical motors with a limit switch that ensures smooth and efficient gate operation. The slow-down feature allows for speed adjustment as the gate approaches the open and closed positions, enhancing the overall performance and providing a refined and personalized touch. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 LS 24V KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V electro-mechanical motors 1 x Control board 1 x Pair of photocells 1 x XF868 receiver 2 x Two-channel remote transmitters Installation manual and hardware

FAAC 415 L 24V KIT S | Electro Mechanical Operator Single Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L 24V KIT S is a comprehensive electro-mechanical operator kit designed for single residential and light commercial swing gates with a maximum leaf length of up to 4 meters. This kit includes all necessary components for effective and efficient gate automation, featuring a battery backup for mains power failures and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Single operator kit for swing gates Suitable for gates up to 4 meters per leaf 24V electro-mechanical motor Battery backup available for power failures Built-in obstacle detection for safety Quick and easy installation Includes motor, control board, photocells, receiver, and transmitters Product Description The FAAC 415 L 24V KIT S is designed to provide robust and reliable automation for single swing gates up to 4 meters in length per leaf. This kit includes a powerful 24V electro-mechanical motor that ensures smooth and efficient gate operation. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L 24V KIT S offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 1 x FAAC 415 L 24V DC Operator 1 x FAAC E124 Control Board 1 x FAAC XF 868 SLH Receiver 2 x FAAC 868 SLH 2 Channel Transmitters 1 x FAAC XP 20B D Pair of Photocells Installation manual and hardware

FAAC 415 L 24V KIT | Electro Mechanical Operator Double Long Kit for Swing Gates Up to 4m

Product Overview The FAAC 415 L 24V KIT is a comprehensive electro-mechanical double operator kit designed for residential and light commercial swing gates with leaves up to 4 meters each. This kit includes all necessary components for effective and efficient gate automation, featuring a battery backup for mains power failures and built-in obstacle detection for enhanced safety. Designed for quick and easy installation, this kit is ideal for enhancing security and convenience. Key Features Double operator kit for swing gates Suitable for gates up to 4 meters per leaf 24V electro-mechanical motors Battery backup available for power failures Built-in obstacle detection for safety Quick and easy installation Includes motors, control board, photocells, receiver, and transmitters Product Description The FAAC 415 L 24V KIT is designed to provide robust and reliable automation for double swing gates up to 4 meters in length per leaf. This kit includes powerful 24V electro-mechanical motors that ensure smooth and efficient gate operation. The battery backup feature ensures that the gates remain operational even during mains power failures, thus enhancing security and convenience. The built-in obstacle detection feature ensures safety by stopping and reversing the gate upon detecting an obstacle. This is achieved by sensing an increase in resistance caused by a person, vehicle, object, or even wind obstructing the path of the gate. It is strongly advised that all installations undergo an impact force test to ensure safety, with further safety enhancements possible by adding safety edges. This kit is designed for quick and easy installation, making it suitable for both residential and light commercial applications. The receiver and pair of photocells provided in the kit ensure safety and compatibility with various remote transmitters. With its comprehensive components, the FAAC 415 L 24V KIT offers a complete solution for gate automation, enhancing both security and convenience for users. What's in the Box: 2 x 24V electro-mechanical motors 1 x Control board 1 x Pair of photocells 1 x XF868 receiver 2 x Two-channel remote transmitters Installation manual and hardware

CAME U4483-B | Garage Door Kit with Chain Guide

Product OverviewThe CAME U4483-B garage door kit is a comprehensive solution for automating your garage door. This complete kit includes a 24V motor, chain guide, and all necessary accessories for efficient and reliable operation. With a 3-year guarantee, the CAME U4483-B ensures long-lasting performance and peace of mind.Key FeaturesComplete garage door kit with chain guideIncludes a 24V motor (V900E) for reliable operation3-year guarantee for long-term performanceComprehensive accessory set for seamless installationProduct DescriptionThe CAME U4483-B garage door kit is designed to provide a robust and efficient automation solution for your garage door. This kit includes a V900E 24V motor, ensuring reliable and smooth operation. The included chain guide enhances the durability and performance of the system.In addition to the motor and chain guide, the kit includes a V0679 transmission arm, DIR10 photocells for safety, a DOC-P push button for easy control, an AF43S radio card, a TAM-432SA remote transmitter, and a KIAR024N flashing light for enhanced visibility and safety.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product to ensure compliance with all safety standards and guidelines.What Comes in the Box1x V900E 24V Motor1x V0679 Transmission Arm1x DIR10 Photocells1x DOC-P Push Button1x AF43S Radio Card1x TAM-432SA Remote Transmitter1x KIAR024N Flashing LightTechnical SpecificationsProduct Code: CAME-U4483-BPower Supply: 24VMotor Type: V900EAccessories: Transmission Arm, Photocells, Push Button, Radio Card, Remote Transmitter, Flashing LightGuarantee: 3 YearsInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME U4492-BKIT | Garage Door Kit with Chain Guide

Product OverviewThe CAME U4492-BKIT garage door kit is a comprehensive solution for automating your garage door. This complete kit includes a 24V motor, chain guide, and all necessary accessories for efficient and reliable operation. With a 3-year guarantee, the CAME U4492-BKIT ensures long-lasting performance and peace of mind.Key FeaturesComplete garage door kit with chain guideIncludes a 24V motor (V900E) for reliable operation3-year guarantee for long-term performanceComprehensive accessory set for seamless installationProduct DescriptionThe CAME U4492-BKIT garage door kit is designed to provide a robust and efficient automation solution for your garage door. This kit includes a V900E 24V motor, ensuring reliable and smooth operation. The included chain guide enhances the durability and performance of the system.In addition to the motor and chain guide, the kit includes a V0687 standard transmission arm, DOC-P push button for easy control, AF43S radio card, TOP-432NA remote transmitter, TOP-A433N antenna, and TOP-RG58 5m of antenna cable. This comprehensive set of accessories ensures seamless installation and reliable performance.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product to ensure compliance with all safety standards and guidelines.What Comes in the Box1x V900E 24V Motor1x V0687 Standard Transmission Arm1x DOC-P Push Button1x AF43S Radio Card1x TOP-432NA Remote Transmitter1x TOP-A433N Antenna1x TOP-RG58 5m Antenna CableTechnical SpecificationsProduct Code: CAME-U4492-BKITPower Supply: 24VMotor Type: V900EAccessories: Standard Transmission Arm, Push Button, Radio Card, Remote Transmitter, Antenna, Antenna CableGuarantee: 3 YearsInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME U4534-BKIT | Garage Door Kit with Chain Guide

Product OverviewThe CAME U4534-BKIT garage door kit is a comprehensive solution for automating your garage door. This complete kit includes a 24V motor, chain guide, and all necessary accessories for efficient and reliable operation. With a 3-year guarantee, the CAME U4534-BKIT ensures long-lasting performance and peace of mind.Key FeaturesComplete garage door kit with chain guideIncludes a 24V motor (V700E) for reliable operation3-year guarantee for long-term performanceComprehensive accessory set for seamless installationProduct DescriptionThe CAME U4534-BKIT garage door kit is designed to provide a robust and efficient automation solution for your garage door. This kit includes a V700E 24V motor, ensuring reliable and smooth operation. The included chain guide enhances the durability and performance of the system.In addition to the motor and chain guide, the kit includes a V0687 standard transmission arm, DOC-P push button for easy control, AF43S radio card, TOP-432NA remote transmitter, TOP-A433N antenna, and 5 meters of TOP-RG58 antenna cable. This comprehensive set of accessories ensures seamless installation and reliable performance.For optimal performance and safety, it is recommended that the installation process is carried out by a qualified professional using the correct tools and materials. Be sure to read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing and installing the product to ensure compliance with all safety standards and guidelines.What Comes in the Box1x V700E 24V Motor1x V0687 Standard Transmission Arm1x DOC-P Push Button1x AF43S Radio Card1x TOP-432NA Remote Transmitter1x TOP-A433N Antenna5 meters of TOP-RG58 Antenna CableTechnical SpecificationsProduct Code: CAME-U4534-BKITPower Supply: 24VMotor Type: V700EAccessories: Standard Transmission Arm, Push Button, Radio Card, Remote Transmitter, Antenna, Antenna CableGuarantee: 3 YearsInstallation and SafetyPlease ensure that you read the CAME Automative Barrier Directives & Barrier Installation Safety Notes before purchasing any gate automation product. Additionally, make sure that the product's installation process is carried out by a qualified professional and that the correct tools and materials are used to avoid causing serious injury.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogAE-P24 24v Electro Mechanical Underground Operator Pair Kit | Up to 3.5m Leaf

Product OverviewThe CAME FrogAE-P24 Kit offers a comprehensive solution for residential or apartment block swing gates, accommodating gates up to 3.5m in width or 400kg per leaf, or 2m in width or 800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Connect Compatibility: Enables full remote control and system management.CAME Key Compatibility: Allows for simple setup and backup via smartphone.Designed for Damp Conditions: Suitable for below-ground level installation in both metal and wooden gates.Irreversible Gearmotor: Provides firm locking without needing an electric locking system, enhancing security.Pedestrian Opening: Allows opening of one leaf for limited access.Manual Release Mechanism: Key-operated release accessible from both sides in case of power failure.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 400kg (3.5m leaf) or 800kg (2m leaf)Max Length Per Gate: 3500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 24vWhat's in the Box?2x Frog-AE24 underground operators2x Frog-CF foundation cases2x A4364 release mechanisms1x DIR-10 pair of photocells1x ZLJ24 control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogAE-S24 24v Electro Mechanical Underground Operator Single Kit | Up to 3.5m Leaf

Product OverviewThe CAME FrogAE-S24 Kit offers a comprehensive solution for single residential or apartment block swing gates, accommodating gates up to 3.5m in width or 800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesBattery Backup Available: Ensures operation in the event of a main power failure, allowing access even during power outages.Ultimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Intensive Use: Designed for high-frequency use, making it suitable for shared entrance gates.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Single Gate KitMax Weight Per Gate: 800KgMax Length Per Gate: 3500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 24vWhat's in the Box?1x Frog-AE24 underground operator1x Frog-CF foundation case1x A4364 release mechanism1x DIR-10 pair of photocells1x ZLJ24 control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit FERNIE-P24 | Up to 4m

Product OverviewThe CAME FERNI Articulated Arm Swing Gate Automation Kit is designed for gates up to 4m or up to 400kg per leaf. This 24V kit is ideal for both single homes and apartment blocks, offering reliable and robust gate automation. The FERNI range is fully Connect compatible, allowing for full remote control and system management. It also supports the CAME Key for simple setup and backup via smartphone.Key FeaturesSuitable for swing gates up to 4m or up to 400kg per leaf24V electromechanical motor with encoderFully Connect compatible for remote control and system managementCAME Key support for easy setup and backup via smartphoneIdeal for large gate posts in single homes and apartment blocksKit Contents2x Ferni 24V Gearmotors (with Encoder)1x Multi-Function Control Panel1x Plug-in Radio Frequency Code2x Dual Frequency 4-Button Fixed Code Transmitters1x Tuned Antenna1x Pair Safety Photocells2x FE4024 motors (with encoder)1x AF43S radio card1x pair DIR-10 photocells1x ZLJ24 control panel2x TOP-432NA remote transmitters1x TOP-A433N antennaSpecificationsMax gate leaf width4mMax gate leaf weight400kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FERNIE-S24 | Up to 4m

Product OverviewThe CAME FERNIE-S24 KIT is a complete automation solution for single residential or apartment block swing gates up to 4m in width or 800kg in weight per leaf. This 24V kit is designed for intensive use and includes advanced features such as obstacle detection, slow down on open and close, and battery backup for reliable operation during power failures.Key FeaturesSuitable for single swing gates up to 4m in width or 800kg in weight per leafBattery backup available for operation during mains power failureAdjustable speed for slow down on open and close positionsLCD display on control panel for simplified programmingDesigned for large square pillars with articulated arm for easy installationBuilt for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote monitoring and control via smartphone appKit Contents2x Ferni 24V Gearmotors (with Encoder)1x Multi-Function Control Panel1x Plug-in Radio Frequency Code2x Dual Frequency 4-Button Fixed Code Transmitters1x Tuned Antenna1x Pair Safety PhotocellsSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FAST40-S24 | 24V | Up to 2.3m

Product OverviewThe CAME FAST40-S24 KIT is an ideal solution for automating single residential or apartment block swing gates up to 2.3m in width or 400kg in weight per leaf. Designed for medium-to-large pillars, this 24V kit features quick installation with no extra work needed on the pillar or gate itself. The system provides comprehensive control and management of your automated gate system.Key FeaturesSuitable for single swing gates up to 2.3m in width or 400kg in weight per leafHandy release lever for manually opening the gate during power outagesSimplified connections with one single three-conductor cableCompatible with Zero-E solar panel for off-grid operationSLEEP MODE function for energy efficiencyInternal control board with reduced installation timeBuilt-in mechanical stops for adjustable opening and closingEN Tested technology for easy system certificationFully adjustable gate run and slowdown managementSafety features including obstacle detection and self-diagnosisKit Contents1x FA4024CB motor with control board1x AF43S radio card1x pair DIR10 photocells2x TOP-432NA remote transmitters1x TOP-A433N antennaSpecificationsMax gate leaf width2.3mMax gate leaf weight400kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit AMICO-P24 | 24V | Up to 1.8m

Product OverviewThe CAME AMICO-P24 KIT is a complete automation solution for a pair of residential swing gates up to 1.8m in width or 250kg in weight per leaf. This 24V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for a pair of swing gates up to 1.8m in width or 250kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredKit Contents2x CAME A1824 24V Motors1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZL92Z Control Panel2x CAME TOPD4FKS Radio Remotes (806TS-0102)1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width1.8mMax gate leaf weight250kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit AMICO-S24 | 24V | Up to 1.8m

Product OverviewThe CAME AMICO-S24 KIT is a complete automation solution for a single residential swing gate up to 1.8m in width or 250kg in weight per leaf. This 24V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for a single swing gate up to 1.8m in width or 250kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredKit Contents1x CAME A1824 24V Motor1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZL90 Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width1.8mMax gate leaf weight250kgMotor voltage24VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-P324 KIT | Swing Gate Automation | For Pair Gates Up to 3m

Product OverviewThe CAME AXO-P324 KIT is a comprehensive automation solution for a pair of residential or apartment block swing gates up to 3m in width or 800kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for swing gates up to 3m in width or 800kg in weight per leafBattery backup available for power failuresAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyDesigned for intensive useQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-P324 KIT is designed to offer a complete automation solution for swing gates in residential or apartment block settings. Capable of handling gates up to 3m wide and weighing up to 800kg per leaf, this kit ensures powerful and reliable performance with its 24V motors.The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, though for gates over 1.8m wide, consultation is advised to ensure this feature meets specific installation needs.Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges.The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.What Comes in the Box2x CAME AX3024 24V Motors1x CAME AF43S Frequency Card 433MHz1x CAME DIR-10 Pair of Safety Photocells1x CAME ZLJ24Z Control Panel2x CAME TOPD4RKS Radio Remotes - 806TS-01221x CAME TOP-A433N AntennaSpecificationsMax gate leaf width: 3mMax gate leaf weight: 800kgMotor voltage: 24VPower supply: 24VFrequency of use: IntensiveOperating temperature: -20°C to +55°CProtection level: IP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electro mechanical automation for swing gates pair kit AXO P524 for up to 5m

Product OverviewThe CAME AXO-P524 KIT is designed for automated swing gates, making it an ideal solution for residential or apartment buildings. This kit can handle gates up to 5m in width or 1000kg in weight for each leaf, providing reliable and efficient operation with advanced safety features. It comes with a battery backup to ensure functionality even during power outages, offering peace of mind and convenience.Key FeaturesBattery Backup Available: Ensures the gate operates even during power failures, preventing unauthorized access.Slow Down on Open and Close: Customizable speed adjustment for a smooth and safe operation as the gate approaches its endpoints.Integrated Open & Close Limits: Allows precise setting of gate travel limits without the need for physical stops in the ground.LCD Display: Simplified programming through an integrated control panel display.Intensive Use: Suitable for frequent use, ideal for shared entrances or large residential areas.Built-in Obstacle Detection: Safety feature to stop and reverse the gate if an obstacle is detected in its path.Quick & Easy Installation: Minimal groundwork required, facilitating swift setup and use.CAME Cloud Technology: Control your gate from anywhere using the cloud-based service via smartphone.What's in the Box2x AX5024 24V Motors1x AF43S Frequency Card (433.92MHz)1x DIR-10 Pair of Safety Photocells1x ZLJ24 Control Panel1x TOP-A433N Antenna2x TOP-432NA Remote TransmittersSpecification ListMotors: 2x AX5024 24v MotorsControl Panel: 1x ZLJ24 Control PanelFrequency Card: 1x AF43S Frequency Card 433.92MHzPhoto Cells: 1x DIR-10 Pair of Safety PhotocellsRadio Card: 1x AF43S Radio CardTransmitters: 2x TOP-432NA Remote TransmittersAntenna: 1x TOP-A433N AntennaAdditional InformationThis advanced automation kit includes a battery backup for continuous operation, LCD display for ease of control, and obstacle detection for enhanced safety. It's designed for intensive use, making it perfect for locations with high traffic. The system also supports cloud connectivity, allowing remote monitoring and control through the CAME mobile app. This kit includes all necessary components for installation and is compatible with a range of CAME automation devices.With the CAME AXO-P524 KIT, you can enjoy the convenience and security of automated swing gates, complete with modern features for optimal performance and user experience.CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-S524 KIT | Swing Gate Automation | For Single Gates Up to 5m

Product OverviewThe CAME AXO-S524 KIT is a comprehensive automation solution for a single residential or apartment block swing gate up to 5m in width or 1000kg in weight. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for single swing gates up to 5m in width or 1000kg in weightBattery backup available for power failuresAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyDesigned for intensive useQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-S524 KIT is designed to offer a complete automation solution for single swing gates in residential or apartment block settings. Capable of handling gates up to 5m wide and weighing up to 1000kg, this kit ensures powerful and reliable performance with its 24V motor.The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, though for gates over 1.8m wide, consultation is advised to ensure this feature meets specific installation needs.Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges.The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.What Comes in the Box1x AX5024 motor1x AF43S radio card1x pair DIR-10 photocells1x ZLJ24 control board2x TOP-432NA remote transmitters1x TOP-A433N antennaSpecificationsMax gate leaf width: 5mMax gate leaf weight: 1000kgMotor voltage: 24VPower supply: 24VFrequency of use: IntensiveOperating temperature: -20°C to +55°CProtection level: IP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOA-P24 KIT | Swing Gate Automation | For Pair Gates Up to 1.8m

Product Overview The CAME STYLOA-P24 KIT is a comprehensive automation solution for a pair of residential small gate post swing gates up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required Product Description The CAME STYLOA-P24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motors. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 2x CAME STYLO-ME 24V Motors 1x CAME AF43S Frequency Card 433MHz 1x CAME DIR-10 Pair of Safety Photocells 1x CAME ZL92Z Control Panel 2x CAME TOPD4RKS Radio Remotes - 806TS-0122 1x CAME TOP-A433N Antenna 2x CAME STYLO-BS Articulated Arms Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOA-S24 KIT | Swing Gate Automation | For Single Gates Up to 1.8m

Product Overview The CAME STYLOA-S24 KIT is a comprehensive automation solution for a single residential small gate post swing gate up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required Product Description The CAME STYLOA-S24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motors. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 1x STYLO-ME motor 1x STYLO-BS articulated arm 1x pair DIR-10 photocells 1x ZL192 control board 2x TOP-432NA remote transmitters 1x TOP-A4332N antenna 1x AF43S radio card Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOS-P24 KIT | Swing Gate Automation | For Pair Gates Up to 1.8m

Product Overview The CAME STYLOS-P24 KIT is a comprehensive automation solution for a pair of residential small gate post swing gates up to 1.8m in width or 100kg in weight per leaf. This 24V slide arm kit is ideal for smaller-sized posts and can operate in limited spaces due to its compact design and articulated transmission arm. The kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, and built-in obstacle detection for enhanced safety. Key Features Suitable for swing gates up to 1.8m in width or 100kg in weight per leaf, and up to 150kg for gates up to 0.8m in width Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop Locking in open and closed positions, eliminating the need for additional locking devices Low voltage with built-in encoders for safe operation LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Quick and easy installation with minimal excavation required Compatible with CAME Key for simple setup and backup by smartphone CAME Cloud Technology for remote management and control Product Description The CAME STYLOS-P24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 100kg per leaf (or 150kg for gates up to 0.8m), this kit ensures powerful and reliable performance with its 24V motors and articulated transmission arms. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 2x 24V Stylo Gearmotors (with Encoder) 2x Arms 1x Control Panel 1x Plug-in Radio Frequency Code 2x Dual Frequency 4-Button Fixed Code Transmitters 1x Tuned Antenna 1x Pair Safety Photocells Specifications Max gate leaf width: 1.8m Max gate leaf weight: 100kg (150kg for gates up to 0.8m) Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME STYLOS-S24 KIT | Swing Gate Automation | For Single Gates Up to 1.8m

Product Overview The CAME STYLOS-S24 KIT is a comprehensive automation solution for a single residential small gate post swing gate up to 1.8m in width or 150kg in weight per leaf. This 24V kit includes features such as battery backup for power failures, adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. Key Features Suitable for swing gates up to 1.8m in width or 150kg in weight per leaf Battery backup available for power failures Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop LCD display on control panel for simplified programming Built-in obstacle detection for enhanced safety Designed for intensive use Quick and easy installation with minimal excavation required 3-year warranty on all CAME electrical components CAME Cloud Technology for remote management and control Product Description The CAME STYLOS-S24 KIT is designed to offer a complete automation solution for small swing gates in residential settings. Capable of handling gates up to 1.8m wide and weighing up to 150kg per leaf, this kit ensures powerful and reliable performance with its 24V motor and transmission arm. The kit's battery backup feature ensures that the gate remains operational even during mains power failures, providing continuous access to the property. The adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. The integrated open and close limits eliminate the need for physical stops, making installation simpler and more efficient. Safety is a priority with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.   * Please note:  CAME Connect  & Battery Backup are additional products and not part of a standard kit * What Comes in the Box 1x STYLO-ME motor 1x STYLO-BD transmission arm 1x pair DIR-10 photocells 1x ZLX24SA control board 2x TOP-432NA remote transmitters 1x TOP-A4332N antenna 1x AF43S radio card   Specifications Max gate leaf width: 1.8m Max gate leaf weight: 150kg Motor voltage: 24V Power supply: 24V Frequency of use: Intensive Operating temperature: -20°C to +55°C Protection level: IP44 Features Reliable and sturdy Custom-key release system Movement controlled by the encoder Can operate in emergency mode during power outages Compliance tested to meet UK standards CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FROG A 24 | Underground Swing Gate Motor | For Gates Up to 3.5m (24V)

Product Overview The CAME FROGA24 is a robust underground swing gate motor designed for single residential gates up to 3.5m in length and 800kg in weight. This 24V motor offers reliable performance with a mechanical locking method and an intensive duty cycle, making it suitable for residential applications. The motor provides a maximum opening angle of 110 degrees and features adjustable gate speed to suit various operational needs. With an IP67 protection rating, it is built to withstand various environmental conditions, ensuring durability and longevity. Key Features Suitable for single swing gates up to 3.5m in length or 800kg in weight Underground installation for a discreet appearance Mechanical locking motor for enhanced security Operates at 24V for reliable performance Adjustable gate speed for customizable operation Maximum opening angle: 110 degrees Intensive duty cycle for frequent use IP67 protection rating for resistance to environmental conditions Product Description The CAME FROGA24 is an advanced underground swing gate motor tailored for residential gates requiring a discreet and efficient automation solution. Engineered to handle gates up to 3.5m in length and weighing up to 800kg, this motor ensures robust and reliable performance with its electromechanical design. The motor is mechanically locking, providing an added layer of security to keep the gate securely closed when not in operation. With a motor voltage of 24V, the CAME FROGA24 delivers consistent power and efficiency. It features adjustable gate speed, allowing for smooth and customizable opening and closing operations. The motor supports a maximum opening angle of 110 degrees, accommodating various gate configurations. Designed for intensive duty cycles, it is ideal for residential settings with frequent use. The motor's IP67 protection rating ensures it is well-protected against dust and water ingress, making it suitable for outdoor installations in different weather conditions. This underground motor is perfect for homeowners seeking a reliable and unobtrusive automation solution for their swing gates. What Comes in the Box 1x CAME FROGA24 24V Motor Specifications Gate Type: Swing Gate Max Weight Per Gate: 800kg Max Length Per Gate: 3500mm Installation Type: Underground Max Opening Angle: 110 Degrees Motor Type: Electromechanical Locking Method: Mechanically Locking Motor Motor Voltage: 24V Gate Speed: Adjustable Duty Cycle: Intensive Protection Rating: IP67 Category: Swing Gate Motor

CAME FROG-A24E | 24V Electro-Mechanical Underground Operator | Up to 3.5m (Self Locking)

Product Overview The CAME FROG-A24E is a high-performance 24V electro-mechanical underground operator designed for automating swing gates with gate leaves up to 3.5 meters. This self-locking motor, equipped with an encoder, provides reliable and efficient operation. It is an ideal direct replacement for broken or damaged CAME FROG-A24E gate motors, ensuring your gate automation system is back up and running smoothly. Key Features Suitable for swing gates with leaves up to 3.5 meters. 24V electro-mechanical underground operation for robust performance. Self-locking mechanism with encoder for added security. Direct replacement for CAME FROG-A24E models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. Product Description CAME FROG-A24E | 24V Electro-Mechanical Underground Operator | Up to 3.5m (Self Locking) The CAME FROG-A24E is engineered to provide reliable and efficient automation for swing gates up to 3.5 meters in length. This 24V self-locking electro-mechanical underground operator with an encoder ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the FROG-A24E offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME FROG-A24E motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Up to 3.5m Operation Electro-Mechanical Underground Self-Locking Yes, with Encoder Replacement For CAME FROG-A24E Condition Brand New Manufacturer CAME For those looking to replace their existing CAME FROG-A24E gate motor, this 24V electro-mechanical underground operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME Electro mechanical automation for swing gates FERNIE FE4024 24v

Ideal solution for residential or apartment-block applications on large posts An EN-tested product thanks to encoder-based electronics management. The tough automation for very large gate posts. Innovative design for a prestigious product, born out of careful attention to market needs. Supplied with an articulated arm, but also available with the straight arm, to solve any space issues during application. Extremely practical to install and connect thanks to its versatile, easy-to-reach end stop assembly. Features a practical key-protected trap-door for easy release. High standards of protection from environmental gates.

CAME Articulated arm automation for swing gates FA4024CB 24v

3 Year guarantee

CAME A1824 | 24V Electro-Mechanical Automation for Swing Gates | Up to 1.8m

Product Overview The CAME A1824 is a high-performance 24V electro-mechanical motor designed for automating swing gates with gate leaves up to 1.8 meters. This motor provides reliable and efficient operation, making it an ideal direct replacement for broken or damaged CAME A1824 gate motors. Ensure your gate automation system is back up and running smoothly with this high-quality replacement motor. Key Features Suitable for swing gates with leaves up to 1.8 meters. 24V electro-mechanical operation for robust performance. Direct replacement for CAME A1824 models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. Product Description CAME A1824 | 24V Electro-Mechanical Automation for Swing Gates | Up to 1.8m The CAME A1824 is engineered to provide reliable and efficient automation for swing gates up to 1.8 meters in length. This 24V electro-mechanical operator ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the A1824 offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME A1824 motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Up to 1.8m Operation Electro-Mechanical Replacement For CAME A1824 Condition Brand New Manufacturer CAME For those looking to replace their existing CAME A1824 gate motor, this 24V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME AX3024 | 24V Electro-Mechanical Motor for Swing Gates | Up to 3m (Self Locking)

Product Overview The CAME AX3024 is a high-performance 24V electro-mechanical motor designed for automating swing gates with gate leaves up to 3 meters. This self-locking motor, equipped with an encoder, provides reliable and efficient operation. It is an ideal direct replacement for broken or damaged CAME AX3024 gate motors, ensuring your gate automation system is back up and running smoothly. Key Features Suitable for swing gates with leaves up to 3 meters. 24V electro-mechanical operation for robust performance. Self-locking mechanism with encoder for added security. Direct replacement for CAME AX3024 models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. EN tested for safety and reliability. Product Description CAME AX3024 | 24V Electro-Mechanical Motor for Swing Gates | Up to 3m (Self Locking) The CAME AX3024 is engineered to provide reliable and efficient automation for swing gates up to 3 meters in length. This 24V self-locking electro-mechanical operator with an encoder ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the AX3024 offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME AX3024 motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Up to 3m Maximum Gate Weight 800kg per gate leaf Operation Electro-Mechanical Self-Locking Yes, with Encoder Replacement For CAME AX3024 Condition Brand New Manufacturer CAME Certification EN Tested For those looking to replace their existing CAME AX3024 gate motor, this 24V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME AX5024 | 24V Electro-Mechanical Automation for Swing Gates | Up to 5m Gate Leaf

Product Overview The CAME AX5024 is a high-performance 24V electro-mechanical operator designed for automating swing gates with gate leaves up to 5 meters. This self-locking motor, equipped with an encoder, provides reliable and efficient operation. It is an ideal direct replacement for broken or damaged CAME AX5024 gate motors, ensuring your gate automation system is back up and running smoothly. Key Features Suitable for swing gates with leaves up to 5 meters. 24V electro-mechanical operation for robust performance. Self-locking mechanism with encoder for added security. Direct replacement for CAME AX5024 models. Genuine CAME product with manufacturer support. Next working day delivery available, subject to stock. Includes full technical support for installation and setup. Product Description CAME AX5024 | 24V Electro-Mechanical Automation for Swing Gates | Up to 5m Gate Leaf The CAME AX5024 is engineered to provide reliable and efficient automation for swing gates up to 5 meters in length. This 24V self-locking electro-mechanical operator with an encoder ensures secure and precise gate movements, making it an ideal choice for residential and commercial applications. As a genuine CAME product, the AX5024 offers the highest standards of quality and performance. If you are confident that you have the correct part and model, you can take advantage of our next working day delivery service for orders placed before 2 pm, subject to stock availability. Our gate motors are brand new and sourced directly from the manufacturer in the UK, ensuring you receive a reliable and high-quality product. We provide full technical support and advice to assist you in the installation and maintenance of your CAME AX5024 motor, ensuring a smooth and trouble-free setup process. Technical Specifications SpecificationDetails Power Supply 24V Gate Compatibility Swing Gates Up to 5m Operation Electro-Mechanical Self-Locking Yes, with Encoder Replacement For CAME AX5024 Condition Brand New Manufacturer CAME For those looking to replace their existing CAME AX5024 gate motor, this 24V electro-mechanical operator offers seamless compatibility and reliable performance. Contact our support team for any technical assistance you may require during installation.

CAME Electro mechanical automation for swing gates STYLO-ME 24v for up to 1.8m

CAME STYLO-ME Looking to replace a broken CAME STYLO-ME. This item can be used as a direct replacement for your broken or damaged gate motor. If you are confident that you have the correct part and model buy before 2 pm for the next working day delivery. subject to stock. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.

CAME Electro mechanical automation for swing gates STYLO-RME 24v up to 1.8m

CAME STYLO-RME Looking to replace a broken CAME STYLO-RME. This item can be used as a direct replacement for your broken or damaged gate motor. If you are confident that you have the correct part and model buy before 2 pm for the next working day delivery. subject to stock. All of our gate motors are brand new. genuine and direct from the manufacturer here in the UK with full advice and technical support to aid you in getting your installation back up and running.