CAME FrogAE-P 230v Electro Mechanical Underground Operator Pair Kit | Up to 3.5m Leaf with Encoder

Product Overview The CAME FrogAE-P Kit offers a comprehensive solution for residential or apartment block swing gates, accommodating gates up to 3.5m in width or 800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level. Key Features Ultimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards. Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation. Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point. Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width. LCD Display: Simplified programming with the control panel's LCD display. Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles. 3 Year Warranty: Confidence in quality with a 3-year warranty on all CAME electrical components. CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app. Specifications Gate Type: Swing Gate Single Or Twin Kit: Twin Gate Kit Max Weight Per Gate: 800Kg Max Length Per Gate: 3500mm Above Or Underground: Underground Max Opening Angle: 110° Motor: Electromechanical Locking Method: Mechanically Locking Motor Power Supply Voltage: 230v Motor Voltage: 230v Gate Speed: 18 seconds - 90° Obstacle Detection: Built-in What's in the Box? 2x Frog-AE underground operators 2x Frog-CF foundation cases 2x A4364 release mechanisms 1x DIR-10 pair of photocells 1x ZLX230P control panel 2x TOP-432NA remote transmitters 1x TOP-A433N antenna 1x AF43S radio card CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogAE-S 230v Electro Mechanical Underground Operator Single Kit | Up to 3.5m Leaf

Product OverviewThe CAME FrogAE-S Kit offers a comprehensive solution for single residential or apartment block swing gates, accommodating gates up to 3.5m in width or 800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.3 Year Warranty: Confidence in quality with a 3-year warranty on all CAME electrical components.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Single Gate KitMax Weight Per Gate: 800KgMax Length Per Gate: 3500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vGate Speed: 18 seconds - 90°Obstacle Detection: Built-inWhat's in the Box?1x Frog-AE underground operator1x Frog-CF foundation case1x A4364 release mechanism1x DIR-10 pair of photocells1x ZM3E control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Frog-P 230v Electro Mechanical Underground Operator Pair Kit | Up to 3.5m Leaf

Product OverviewThe CAME Frog-P Kit offers a comprehensive solution for residential or apartment block swing gates, accommodating gates up to 3.5m in width or 800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 800KgMax Length Per Gate: 3500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?2x CAME FROG-A 230v Motors2x CAME FROG-CFN Foundation Cases2x CAME A4364 Release Mechanisms1x CAME DIR-10 Pair of Safety Photocells1x CAME ZM3E Control Panel2x CAME TOPD4FKS Radio Remotes - 806TS-01021x CAME TOP-A433N Antenna1x CAME AF43S Frequency CardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogPlus-P5 230v Heavy Duty Electro Mechanical Underground Operator Pair Kit | Up to 5.5m Leaf

Product OverviewThe CAME FrogPlus-P5 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 5.5m in width or 1800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 1800KgMax Length Per Gate: 5500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?2x Frog-PM4 underground operators2x Frog-PC foundation cases2x A4364 release mechanisms1x DIR-20 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogPlus-S5 230v Heavy Duty Electro Mechanical Underground Operator Single Kit | Up to 5.5m Leaf

Product OverviewThe CAME FrogPlus-S5 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 5.5m in width or 1800kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Single Gate KitMax Weight Per Gate: 1800KgMax Length Per Gate: 5500mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?1x Frog-PM4 underground operator1x Frog-PC foundation case1x A4364 release mechanism1x DIR-10 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogPlus-P7 230v Heavy Duty Electro Mechanical Underground Operator Pair Kit | Up to 7m Leaf

Product OverviewThe CAME FrogPlus-P7 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 7m in width or 1000kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 1000KgMax Length Per Gate: 7000mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?2x Frog-PM6 underground operators2x Frog-PC foundation cases2x A4364 release mechanisms1x DIR-20 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME FrogPlus-S7 230v Heavy Duty Electro Mechanical Underground Operator Pair Kit | Up to 7m Leaf

Product OverviewThe CAME FrogPlus-S7 Kit offers a comprehensive solution for industrial or apartment block swing gates, accommodating gates up to 7m in width or 1000kg per leaf. This kit ensures top-notch aesthetics by concealing the motor underground, thus removing trapping points above ground level.Key FeaturesUltimate Choice in Aesthetical Appearance: Concealed motor design provides excellent aesthetics and reduces hazards.Slow Down on Open and Close: Adjustable speed settings for a smooth and personalized gate operation.Manual Release from Outside: Allows manual operation in case of power failure, crucial for gates as the sole access point.Integrated Open & Close Limits: Adjustable limits without the need for ground stops, suitable for gates under 1.8m width.LCD Display: Simplified programming with the control panel's LCD display.Built-in Obstacle Detection: Safety feature that stops and reverses the gate upon detecting obstacles.CAME Cloud Technology: Monitor and control your gates remotely via the cloud and the XIP mobile app.SpecificationsGate Type: Swing GateSingle Or Twin Kit: Twin Gate KitMax Weight Per Gate: 1000KgMax Length Per Gate: 7000mmAbove Or Underground: UndergroundMax Opening Angle: 110°Motor: ElectromechanicalLocking Method: Mechanically Locking MotorPower Supply Voltage: 230vMotor Voltage: 230vWhat's in the Box?1x Frog-PM6 underground operator1x Frog-PC foundation case1x A4364 release mechanism1x DIR-10 pair of photocells1x ZM3EP control panel2x TOP-432NA remote transmitters1x TOP-A433N antenna1x AF43S radio cardCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit FERNIE-P | 230V | Up to 4m

Product OverviewThe CAME FERNI Articulated Arm Swing Gate Automation Kit is designed for gates up to 4m or up to 400kg per leaf. This 230V kit is ideal for both single homes and apartment blocks, offering reliable and robust gate automation. The FERNI range is fully Connect compatible, allowing for full remote control and system management. It also supports the CAME Key for simple setup and backup via smartphone.Key FeaturesSuitable for swing gates up to 4m or up to 400kg per leaf230V electromechanical motor with encoderFully Connect compatible for remote control and system managementCAME Key support for easy setup and backup via smartphoneIdeal for large gate posts in single homes and apartment blocksKit Contents2x Ferni 230V Gearmotors (with Encoder)1x Multi-Function Control Panel1x Plug-in Radio Frequency Code2x Dual Frequency 4-Button Fixed Code Transmitters1x Tuned Antenna1x Pair Safety Photocells2x FE40230 motors (with encoder)1x AF43S radio card1x pair DIR-10 photocells1x ZM3E control panel2x TOP-432NA remote transmitters1x TOP-A433N antennaSpecificationsMax gate leaf width4mMax gate leaf weight400kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FERNIE-S | 230V | Up to 4m

Product OverviewThe CAME FERNIE-S KIT is a complete automation solution for single residential or apartment block swing gates up to 4m in width or 800kg in weight per leaf. This 230V kit features advanced functionalities like adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides total control of automated systems at all times.Key FeaturesSuitable for single swing gates up to 4m in width or 800kg in weight per leafSlow down on open and close positions for smooth operationLCD display on control panel for simplified programmingDesigned for large square pillars with articulated arm for easy installationBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote monitoring and control via smartphone appKit Contents1x CAME FE40230 230V Motor1x CAME AF43S Frequency Card1x Pair CAME DIR-10 Safety Photocells1x CAME ZM3EZ Control Panel2x CAME TOP4DRKS Radio Remotes (806TS-0122)1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit FAST40-S | 230V | Up to 2.3m

Product Overview The CAME FAST40-S KIT is an ideal solution for automating single residential or apartment block swing gates up to 2.3m in width or 300kg in weight per leaf. This 230V semi-intensive kit features a mechanically locking motor and provides a maximum opening angle of 110 degrees. The motor operates at a speed of 18 seconds for a 90-degree opening. Key Features Suitable for single swing gates up to 2.3m in width or 300kg in weight per leaf 230V semi-intensive use motor Mechanically locking motor for secure operation Max opening angle of 110 degrees Speed: 18 seconds for 90-degree opening Above ground motor for easy installation Kit Contents 1x FA40230CB motor with control board 1x AF43S radio card 1x pair DIR10 photocells 2x TOP-432NA remote transmitters 1x TOP-A433N antenna Specifications Max gate leaf width 2.3m Max gate leaf weight 300kg Motor voltage 230V Power supply 230V Frequency of use Semi-intensive Operating temperature -20°C to +55°C Protection level IP44 Max opening angle 110 degrees Opening speed 18 seconds for 90 degrees CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit AMICO-S230 | 230V | Up to 2.2m

Product OverviewThe CAME AMICO-S230 KIT is a complete automation solution for a single residential swing gate up to 2.2m in width or 250kg in weight per leaf. This 230V kit features adjustable open and close limits, allowing you to set the limits of the gate's travel without the need for a physical stop in the ground. Designed for quick and easy installation, this equipment is perfect for existing hinged swing gates.Key FeaturesSuitable for a single swing gate up to 2.2m in width or 250kg in weight per leafAdjustable open and close limits without the need for a physical stopQuick and easy installation for existing hinged swing gatesIntegrated control panel for simplified operationKit Contents1x CAME A18230 230V Motor1x CAME AF43S Frequency Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZA3N Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width2.2mMax gate leaf weight250kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Pair Kit AXO P3 | 230V | Up to 3m

Product Overview This kit is for use with a pair of swing gates up to 500kg @ 3m or up to 800kg @ 2m per leaf. The AXO Range is fully Connect compatible which enables full remote control and system management. It is compatible with the CAME Key, allowing for simple setup and backup by smartphone. AXO features a revolutionary double-headed worm screw that drastically reduces wear on the axle boxes. It is designed for long life and the utmost safety even with very large gates. The Gearmotor has high-quality bearing semi-shells in die-cast aluminum. Installation is easy due to a single three-wired cable connection system. Key Features Suitable for a pair of swing gates up to 3m in width or 500kg in weight per leaf Backup batteries ensure operation during power outages Designed to work in all climate conditions Revolutionary double-headed worm-screw reduces wear on the axle box Obstacle detection for enhanced safety Connect compatible for full remote control and system management Easy installation with a single three-wired cable connection system Kit Contents 2x AX3024 230V Irreversible Gearmotors (with Encoder) 1x Multi-Function Control Panel 1x AF43S Plug-in Radio Frequency Code (433.92MHz) 2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz) 1x TOP-A433N Tuned Antenna 1x DIR-10 Pair Safety Photocells Technical Specifications Max gate leaf width 3m Max gate leaf weight 500kg @ 3m, 800kg @ 2m Motor voltage 230V Power supply 230V Operating temperature -20°C to +55°C Protection level IP44 Features Blackout is no longer a problem due to backup batteries. Designed to always work no matter the climate conditions Revolutionary double-headed worm-screw drastically reduces wear on the axle box Obstacle detection AXO is fully Connect compatible, allowing full remote control and system management AXO is compatible with the CAME Key, allowing for simple setup and backup by smartphone. CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electromechanical Swing Gate Single Kit AXO S3 | 230V | Up to 3m

Product OverviewThe CAME AXO-S3 KIT is a complete automation solution for a single residential or apartment block swing gate up to 3m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides total control of automated systems at all times.Key FeaturesSuitable for a single swing gate up to 3m in width or 800kg in weight per leafBattery backup available for operation during power outagesAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingDesigned for intensive use, ideal for shared entrance gatesBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents1x CAME AX302304 230V Motor1x CAME AF43S Radio Card 433MHz1x Pair CAME DIR-10 Safety Photocells1x CAME ZM3E Control Board2x CAME TOP-432NA Remote Transmitters1x CAME TOP-A433N AntennaSpecificationsMax gate leaf width3mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Above Ground Automation AXO-P4 Kit for Swing Gates Up to 4m

Product OverviewThe CAME AXO-P4 KIT is a complete automation solution for a pair of residential or apartment block swing gates up to 4m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for swing gates up to 4m in width or 800kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents2x CAME AX402306 230V Irreversible Gearmotors (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME Electro Mechanical Automation for Swing Gates Single Kit AXO S4 for Up to 4m

Product OverviewThe CAME AXO-S4 KIT is a complete automation solution for a single residential or apartment block swing gate up to 4m in width or 800kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming. The system provides comprehensive control of automated systems at all times.Key FeaturesSuitable for a single swing gate up to 4m in width or 800kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlKit Contents1x CAME AX402306 230V Irreversible Gearmotor (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width4mMax gate leaf weight800kgMotor voltage230VPower supply230VFrequency of useIntensiveOperating temperature-20°C to +55°CProtection levelIP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-P7 KIT | Above Ground Gate Automation | For Swing Gates Up to 7m

Product OverviewThe CAME AXO-P7 KIT is a complete automation solution for a pair of residential or apartment block swing gates up to 7m in width or 1000kg in weight per leaf. This 230V kit includes advanced functionalities such as adjustable speed for smooth open and close, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for swing gates up to 7m in width or 1000kg in weight per leafAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-P7 KIT is designed to offer a comprehensive automation solution for swing gates in residential or apartment block settings. Each leaf of the gate can be up to 7m wide and weigh up to 1000kg, making this kit suitable for a wide range of applications. The 230V motors included in the kit ensure powerful and reliable performance.The kit's adjustable speed feature allows for smooth opening and closing of the gates, enhancing the overall user experience. Safety is a priority with the built-in obstacle detection system, which helps prevent accidents and damage. The LCD display on the control panel simplifies programming and adjustments, making the setup process straightforward and user-friendly.The CAME Cloud Technology supports remote management and control, ensuring users can always stay connected to their system.Kit Contents2x CAME AX702306 230V Irreversible Gearmotors (with Encoder)1x Multi-Function Control Panel (ZM3E)1x AF43S Plug-in Radio Frequency Code (433.92MHz)2x TOP-432NA Dual Frequency 4-Button Fixed Code Transmitters (433.92MHz)1x TOP-A433N Tuned Antenna1x DIR-10 Pair Safety PhotocellsSpecificationsMax gate leaf width: 7mMax gate leaf weight: 1000kgMotor voltage: 230VPower supply: 230VFrequency of use: IntensiveOperating temperature: -20°C to +55°CProtection level: IP44CAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME AXO-S7 KIT | Swing Gate Automation | For Single Gates Up to 7m

Product OverviewThe CAME AXO-S7 KIT is a comprehensive automation solution for a single residential or apartment block swing gate up to 7m in width or 1000kg in weight. This 230V kit offers features such as adjustable speed for smooth opening and closing, built-in obstacle detection for enhanced safety, and an LCD display for simplified programming.Key FeaturesSuitable for single swing gates up to 7m in width or 1000kg in weightAdjustable speed for smooth open and close positionsIntegrated open and close limits without the need for a physical stopLCD display on control panel for simplified programmingBuilt-in obstacle detection for enhanced safetyQuick and easy installation with minimal excavation requiredCAME Cloud Technology for remote management and controlProduct DescriptionThe CAME AXO-S7 KIT is tailored for automating single swing gates in residential or apartment block settings. Capable of handling gates up to 7m wide and weighing up to 1000kg, this kit ensures powerful and dependable performance with its 230V motor.The adjustable speed feature allows for a smooth approach to both the open and closed positions, enhancing the overall functionality and providing a refined touch to each installation. The integrated open and close limits eliminate the need for physical stops, though for gates over 1.8m wide, consultation is advised to ensure this feature meets specific installation needs.Safety is paramount with built-in obstacle detection, which stops and reverses the gate upon encountering resistance. This feature works effectively when the gate detects an obstacle, whether it's a person, vehicle, object, or even wind. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges.The control panel's LCD display simplifies programming and adjustments, making the setup process user-friendly. The CAME Cloud Technology enables users to manage their devices remotely, including monitoring video entry systems and receiving audio/video calls from the entry panel via the XIP mobile app available on the App Store and Google Play.Kit Contents1x AX71230 motor1x AF43S radio card1x pair DIR-10 photocells1x ZM3E control board2x TOP-432NA remote transmitters1x TOP-A433N antennaCAME Connect RGSM unit available with this kit for an additional cost – please call for details

CAME BX-74 KIT | Sliding Gate Motor | For Gates Up to 400kg

Product Overview The CAME BX-74 KIT is a comprehensive sliding gate motor solution designed for residential gates up to 400kg in weight. This 230V motor kit offers advanced functionalities such as adjustable speed for smooth opening and closing, built-in obstacle detection for enhanced safety, and integrated open and close limits for precise control. The CAME BX-74 also supports GSM connectivity, allowing for remote management and control of the automated system. Key Features Suitable for sliding gates up to 400kg in weight Adjustable speed for smooth open and close positions Integrated open and close limits without the need for a physical stop Built-in obstacle detection for enhanced safety GSM connectivity for remote management and control Product Description The CAME BX-74 KIT is engineered to provide a reliable and efficient automation solution for sliding gates in residential settings. Capable of handling gates up to 400kg, this motor ensures robust performance and smooth operation. The adjustable speed feature allows for a refined approach to both opening and closing positions, enhancing the overall user experience. The integrated open and close limits feature allows you to set the travel limits of the gate without requiring a physical stop in the ground. This improves the installation process and ensures precise control over the gate's movement. Safety is paramount with the built-in obstacle detection system, which stops and reverses the gate upon detecting resistance. This feature helps prevent accidents and damage, making the system safer for users and their property. For additional safety, it is recommended that all installations undergo an impact force test and consider adding safety edges. The CAME BX-74 KIT also includes GSM connectivity, enabling users to manage and control their gate automation system remotely. This smart operation feature provides convenience and peace of mind, ensuring total control of the automated system at all times. What Comes in the Box 1x BX74 Motor & Control Panel 1x AF43S Radio Card 1x Pair of DIR-10 Photocells 2x TOP-432NA Remote Transmitters 1x TOP-A433N Antenna Specifications Gate Type: Sliding Gate Max Weight Per Gate: 400kg Motor Voltage: 230V Speed Control: Adjustable Obstacle Detection: Yes GSM Connectivity: Yes

CAME BK-2200 KIT | Industrial Sliding Gate Motor | For Gates Up to 2200kg

Product OverviewThe CAME BK-2200 KIT is a complete automation solution designed for industrial sliding gates up to 2200kg in weight. This robust 230V motor kit provides reliable and powerful performance, making it ideal for heavy-duty applications. The kit features adjustable open and close limits, allowing precise control over the gate's travel without the need for a physical stop in the ground.Key FeaturesSuitable for industrial sliding gates up to 2200kg in weightAdjustable open and close limits for precise gate controlMechanical locking motor for enhanced securityOperates at 230V for robust performanceGate speed: 10 meters per minuteSemi-intensive duty cycle for industrial useElectromechanical motor for reliable operationProduct DescriptionThe CAME BK-2200 KIT is engineered to provide a powerful and efficient automation solution for industrial sliding gates. Capable of handling gates up to 2200kg, this motor ensures robust performance and smooth operation. The adjustable open and close limits feature allows you to set the gate's travel limits accurately, improving the installation process and ensuring precise control over the gate's movement.The mechanical locking motor provides added security by keeping the gate securely closed when not in operation. With a motor voltage of 230V, the CAME BK-2200 delivers consistent power and reliability, suitable for demanding industrial environments. The gate operates at a speed of 10 meters per minute, ensuring quick and efficient movement.This kit is designed for semi-intensive duty cycles, making it ideal for industrial applications with moderate traffic. The electromechanical motor offers reliable and durable performance, ensuring the gate system remains operational and efficient over time.What Comes in the Box1x CAME BKS22AGS 230V Motor & Panel - 801MS-01001x CAME AF43S Frequency Card1x CAME DIR-10 Pair of Safety Photocells2x CAME TOP4DRKS Radio Remotes - 806TS-01221x CAME TOP-A433N AntennaSpecificationsGate Type: Sliding GateMax Weight Per Gate: 2200kgPower Supply Voltage: 230VMotor Voltage: 230VGate Speed: 10 M/MinDuty Cycle: Semi-IntensiveLocking Method: Mechanically Locking MotorMotor Type: ElectromechanicalCategory: Sliding Gate KitCAME Connect RGSM unit available with this kit for an additional cost – please call for details