BFT SUB BT Single Kit | Gates up to 2.5m Wide, 800kg | 24V Hydraulic Operator

Product Overview The BFT SUB BT Single Kit is a robust and compact solution designed for very intensive use in residential, industrial, and multi-residence applications. This 24V hydraulic operator kit can automate a swing gate leaf up to 2.5 meters wide and weighing up to 800kg. It includes everything needed for efficient and reliable gate automation. Key Features Range of 24V hydraulic operators for very intensive use Suitable for residential, industrial, and multi-residence applications Automates swing gate leaf up to 2.5m wide and 800kg in weight Compact and sturdy design Includes Thalia P control panel and receiver Comes with 2 Mitto radio transmitters Equipped with a pair of Compacta 180° photocells Includes a radio antenna Product Description Kit Components 1x SUB BT operator 1x Thalia P control panel & receiver 2x Mitto radio transmitters 1x Pair of Compacta 180° photocells 1x Radio antenna Specifications SpecificationDetails Power Supply 24V Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel Thalia Cycle Time 9° per sec Impact Reaction D-Track Protection Rating IP67 Temperature Range -20°C to 60°C Frequency of Use Very intensive Usage Instructions Install the BFT SUB BT Single Kit by following the provided manual. Ensure the gate leaf does not exceed the maximum width and weight specifications. Pair the Mitto transmitters with the Thalia P control panel for seamless operation. Use the Compacta 180° photocells to enhance safety and prevent accidents. The radio antenna ensures reliable signal transmission for remote operation. Dimensions The components of the BFT SUB BT Single Kit are compact and designed for easy installation and integration with existing gate structures. Safety and Maintenance Regularly check the hydraulic operator and control panel for optimal performance. Ensure the photocells are clean and unobstructed. Replace the batteries in the Mitto transmitters as needed. The IP67 protection rating ensures the components are protected against dust and water, but periodic maintenance is recommended to extend the lifespan of the kit.

BFT SUB BT Twin Kit | Gates up to 2.5m Wide, 800kg | 24V Hydraulic Operators

Product Overview The BFT SUB BT Twin Kit is a robust and compact solution designed for very intensive use in residential, industrial, and multi-residence applications. This 24V hydraulic operator kit can automate swing gate leaves up to 2.5 meters wide and weighing up to 800kg. It includes everything needed for efficient and reliable gate automation. Key Features Range of 24V hydraulic operators for very intensive use Suitable for residential, industrial, and multi-residence applications Automates swing gate leaves up to 2.5m wide and 800kg in weight Compact and sturdy design Includes Thalia P control panel and receiver Comes with 2 Mitto radio transmitters Equipped with a pair of Compacta 180° photocells Includes a radio antenna Product Description Kit Components 2x SUB BT operators 1x Thalia P control panel & receiver 2x Mitto radio transmitters 1x Pair of Compacta 180° photocells 1x Radio antenna Specifications SpecificationDetails Power Supply 24V Gate Leaf Length 2m (self-locking), 2.5m (electric lock required) Max Leaf Weight 800kg Control Panel Thalia Cycle Time 9° per sec Impact Reaction D-Track Protection Rating IP67 Temperature Range -20°C to 60°C Frequency of Use Very intensive Usage Instructions Install the BFT SUB BT Twin Kit by following the provided manual. Ensure the gate leaves do not exceed the maximum width and weight specifications. Pair the Mitto transmitters with the Thalia P control panel for seamless operation. Use the Compacta 180° photocells to enhance safety and prevent accidents. The radio antenna ensures reliable signal transmission for remote operation. Dimensions The components of the BFT SUB BT Twin Kit are compact and designed for easy installation and integration with existing gate structures. Safety and Maintenance Regularly check the hydraulic operators and control panel for optimal performance. Ensure the photocells are clean and unobstructed. Replace the batteries in the Mitto transmitters as needed. The IP67 protection rating ensures the components are protected against dust and water, but periodic maintenance is recommended to extend the lifespan of the kit.

BFT ELI BT A40 | Single Kit for Gates up to 4m | 24v Motor

Product Overview The BFT ELI BT A40 Single Kit is a 24v electromechanical underground operator designed for intensive usage, making it perfect for private residences and small apartment blocks. This motor is suitable for a 4-meter gate leaf weighing up to 500 kilograms, providing a robust and efficient solution for gate automation. The Eli range can also provide 180° operation by means of an additional accessory kit. Key Features 24v fast electromechanical underground motor Supports gates up to 4m and 500kg per leaf Designed for intensive usage in private residences and small apartment blocks Includes heavy-duty foundation boxes Comes with BFT THALIA control panel Includes two BFT Mitto RB 2-button transmitters Features safety photocells and antenna Manual release mechanism for emergencies Product Description The BFT ELI BT A40 Single Kit provides an efficient and reliable gate automation solution for gates up to 4 meters in length and weighing up to 500 kilograms. This 24v system is specifically designed for intensive use, making it ideal for private residences and small apartment blocks. The motor's fast performance ensures your gate can open to 90° in just 14 seconds, providing quick and convenient access. This kit includes: 1 x BFT ELI BT A40 Fast Electromechanical Underground Motor for Gates up to 4m (24v) 1 x Heavy Duty Foundation Boxes 1 x BFT THALIA Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair of BFT Safety Photocells 1 x BFT Antenna 1 x Manual Release Mechanism The BFT ELI BT A40 is part of the versatile Eli A35 / A40 Kit Range, which includes various models to suit different needs: ModelVoltageMax leaf lengthMax leaf weightTime to open to 90° Eli AC A35 V Twin Kit 230V 3.5m 200kg 11 secs (no slowdown) Eli AC A40 Twin Kit 230V 4m 500kg 13 secs (no slowdown) Eli AC A35 V Single Kit 230V 3.5m 200Kg 11 secs (no slowdown) Eli AC A40 Single Kit 230V 4m 500Kg 13 secs (no slowdown) Eli BT A35 V Twin Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Twin Kit 24V 4m 500Kg 14 secs (with slowdown) Eli BT A35 V Single Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Single Kit 24V 4m 500Kg 14 secs (with slowdown)

BFT ELI BT A35 | Single Kit for Gates up to 3.5m | 24v Motor

Product Overview The BFT ELI BT A35 Single Kit is a 24v electromechanical underground operator designed for intensive usage, making it perfect for private residences and small apartment blocks. This motor is suitable for a 3.5-meter gate leaf weighing up to 200 kilograms, providing a robust and efficient solution for gate automation. The Eli range can also provide 180° operation by means of an additional accessory kit. Key Features 24v fast electromechanical underground motor Supports gates up to 3.5m and 200kg per leaf Designed for intensive usage in private residences and small apartment blocks Includes heavy-duty foundation boxes Comes with BFT THALIA control panel Includes two BFT Mitto RB 2-button transmitters Features safety photocells and antenna Manual release mechanism for emergencies Product Description The BFT ELI BT A35 Single Kit provides an efficient and reliable gate automation solution for gates up to 3.5 meters in length and weighing up to 200 kilograms. This 24v system is specifically designed for intensive use, making it ideal for private residences and small apartment blocks. The motor's fast performance ensures your gate can open to 90° in just 11 seconds, providing quick and convenient access. This kit includes: 1 x BFT ELI BT A35 V Fast Electromechanical Underground Motor for Gates up to 3.5m (24v) 1 x Heavy Duty Foundation Boxes 1 x BFT THALIA Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair of BFT Safety Photocells 1 x BFT Antenna 1 x Manual Release Mechanism The BFT ELI BT A35 is part of the versatile Eli A35 / A40 Kit Range, which includes various models to suit different needs: ModelVoltageMax leaf lengthMax leaf weightTime to open to 90° Eli AC A35 V Twin Kit 230V 3.5m 200kg 11 secs (no slowdown) Eli AC A40 Twin Kit 230V 4m 500kg 13 secs (no slowdown) Eli AC A35 V Single Kit 230V 3.5m 200Kg 11 secs (no slowdown) Eli AC A40 Single Kit 230V 4m 500Kg 13 secs (no slowdown) Eli BT A35 V Twin Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Twin Kit 24V 4m 500Kg 14 secs (with slowdown) Eli BT A35 V Single Kit 24V 3.5m 200Kg 10 secs (with slowdown) Eli BT A40 Single Kit 24V 4m 500Kg 14 secs (with slowdown)

BFT ELI BT A40 Twin Kit for Gates up to 4m (24V)

Product Overview The ELI BT A40 Twin Kit is ideal for gates up to 4m wide and weighing up to 500kg, providing robust and fast automation for private residences and small apartment blocks. This kit includes two fast electromechanical underground motors, heavy-duty foundation boxes, a THALIA control panel, safety photocells, antennas, and a manual release mechanism. Kit Components 2 x ELI BT A40 Fast Electromechanical Underground Motors for Gates up to 4m (24V) 2 x Heavy Duty Foundation Boxes 1 x BFT THALIA Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair of BFT Safety Photocells 1 x BFT Antenna 1 x Manual Release Mechanism Technical Specifications SpecificationDetails Power Supply 24V Gate Leaf Length Up to 4m Max Leaf Weight Up to 500kg Control Panel THALIA Time to Open 90° 14 sec Product Description The ELI BT A40 Twin Kit offers reliable and efficient operation for gates, featuring a 14-second opening time and compatibility with gates up to 4m wide. It includes essential components like safety photocells and a manual release mechanism for enhanced security and convenience. Compatibility This kit is suitable for intensive use scenarios in residential settings and small apartment complexes where fast and dependable gate automation is required. For more details on the ELI BT A40 Twin Kit or to inquire about purchasing, please contact us or visit our website.

BFT ELI BT A40 Electromechanical Underground Motor for Gates up to 4m (24V) | Motor Only

Product Overview The ELI BT A40 is an electromechanical underground motor designed for gates up to 4m in length and weighing up to 500kg. This 24V motor is ideal for intensive usage in private residences and small apartment blocks. Key Features 24V Power Supply: Operates efficiently with low voltage. Gate Leaf Length: Handles gates up to 4m, suitable for larger installations. Max Leaf Weight: Supports gates weighing up to 500kg, providing robust capacity. Time to Open 90°: Opens gates in 14 seconds with slowdown, ensuring safety. THALIA Control Panel: Compatible for advanced control and monitoring. BTCF Foundation Box: Ensures stable installation support. Product Description The ELI BT A40 electromechanical underground motor is engineered for durability and high performance in residential and light commercial environments. It integrates seamlessly with the THALIA control panel and includes compatibility with the BTCF foundation box for secure installation. Specifications SpecificationELI BT A40 Electromechanical Motor Power Supply 24V Gate Leaf Length Up to 4m Max Leaf Weight 500kg Control Panel THALIA Time to Open 90° 14 sec (with slowdown) Compatibility The ELI BT A40 motor is compatible with the BTCF foundation box, ensuring a secure and reliable installation for your gate automation system. For more details on the ELI BT A40 electromechanical underground motor or to inquire about purchasing, please contact us or visit our website.

BFT Giuno Ultra BT A50 | Long Stroke Single Kit (24V) | Swing Gates Up to 5m & 800kg

Product Overview The Giuno Ultra BT A50 Long Stroke Single Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 5 meters in length and weighing up to 800kg. The Giuno Ultra BT A50 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 5m & 800kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A50 Long Stroke Single Kit is engineered to automate swing gates up to 5 meters in length and 800kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A50 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A50 Power Supply 24V Gate Leaf Length Up to 5m Max Leaf Weight 800kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 1x BFT Giuno Ultra BT A50 24V Hydraulic Operator 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A20 | Standard Stroke Single Kit (24V) | Swing Gates Up to 2m & 300kg

Product Overview The Giuno Ultra BT A20 Standard Stroke Single Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The Giuno Ultra BT A20 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A20 Standard Stroke Single Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A20 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A20 Power Supply 24V Gate Leaf Length Up to 2m Max Leaf Weight 300kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 1x BFT Giuno Ultra BT A20 24V Hydraulic Operator 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A50 | Long Stroke Twin Kit (24V) | Swing Gates Up to 5m & 300kg

Product Overview The Giuno Ultra BT A50 Long Stroke Twin Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 5 meters in length and weighing up to 300kg. The Giuno Ultra BT A50 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 5m & 300kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A50 Long Stroke Twin Kit is engineered to automate swing gates up to 5 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A50 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A50 Power Supply 24V Gate Leaf Length 2.5 - 5m Max Leaf Weight 300kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 2x BFT Giuno Ultra BT A50 24V Hydraulic Operators 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A20 | Standard Stroke Twin Kit (24V) | Swing Gates Up to 2m & 300kg

Product Overview The Giuno Ultra BT A20 Standard Stroke Twin Kit is a 24V hydraulic swing gate operator designed for very intensive use. This operator is capable of handling swing gates up to 2 meters in length and weighing up to 300kg. The Giuno Ultra BT A20 is suitable for a wide range of applications, including residential, industrial, and multi-residence environments. It features built-in obstacle detection through the exclusive D-Track torque management system, ensuring smooth and reliable operation. Key Features Handles Gates Up to 2m & 300kg: Suitable for residential, industrial, and multi-residence environments. D-Track Technology: Analyzes real-time torque data for optimal force application. Hydraulic Operation: Provides smooth and reliable gate movement. Very Intensive Use: Designed for heavy-duty usage conditions. Fast Cycle Time: 14-second cycle time with an opening angle of 110°. High Durability: Built to withstand intensive daily usage. Product Description The Giuno Ultra BT A20 Standard Stroke Twin Kit is engineered to automate swing gates up to 2 meters in length and 300kg in weight per leaf. Ideal for various environments including residential, industrial, and multi-residence settings, this 24V hydraulic gate operator offers robust performance with the exclusive D-Track torque management system. This technology ensures the optimal amount of force is applied for smooth and efficient gate operation while reducing wear and tear. This hydraulic gate opener is designed for very intensive use, capable of handling heavy-duty daily operations. The fast cycle time of 14 seconds and a wide opening angle of 110° make it a highly efficient and practical choice for gate automation. The Giuno Ultra BT A20 is controlled by the THALIA P control panel, providing precise and reliable management of the gate system. Specifications SpecificationGIUNO ULTRA BT A20 Power Supply 24V Gate Leaf Length 2m Max Leaf Weight 300kg Control Panel THALIA P Cycle Time 14 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° Kit Includes 2x BFT Giuno Ultra BT A20 24V Hydraulic Operators 1x BFT THALIA P0 Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Safety Photocells 1x BFT Antenna Available Kits KITGIUNOBTA20SGL: Giuno Ultra BT A20 Standard Stroke Single Kit (24V) KITGIUNOBTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOBTA20: Giuno Ultra BT A20 Standard Stroke Twin Kit (24V) KITGIUNOBTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Giuno Ultra BT A50 | Long Stroke Hydraulic Motor for Gates Up to 5m (24V)

Product Overview The Giuno Ultra BT A50 Long Stroke Hydraulic Motor is a 24V hydraulic swing gate operator designed for residential use. This operator is capable of handling swing gates up to 5 meters in length and weighing up to 400kg. The Giuno Ultra BT A50 combines cutting-edge engineering with power and function to create the ideal solution for residential swing gates. Advanced-Track technology analyzes real-time torque data to provide the optimal amount of force, ensuring a smooth closing and opening action without causing excessive wear. Key Features Handles Gates Up to 5m & 400kg: Suitable for various residential settings. Advanced-Track Technology: Analyzes real-time torque data for optimal force application. High Torque: 3,000 newton operating force and 30 bar maximum pressure. Hydraulic Operation: Provides smooth and reliable gate movement. Built-in Obstacle Detection: Through the exclusive D-Track torque management system. Hard Wearing & Flexible: Suitable for intensive everyday usage. Fast Cycle Time: 20-second cycle time with an opening angle of 110°. Product Description The Giuno Ultra BT A50 Long Stroke Hydraulic Motor is engineered to automate swing gates up to 5 meters in length and 400kg in weight per leaf. Ideal for residential properties, this 24V hydraulic gate operator offers robust performance with high torque and smooth operation. The Advanced-Track technology ensures that the Giuno Ultra BT A50 provides the optimal amount of force for a smooth closing and opening action, reducing wear and tear on the gate. This versatile gate opener is suitable for a wide range of residential settings and is capable of handling intensive everyday usage. The built-in obstacle detection through the exclusive D-Track torque management system enhances the safety and reliability of the automation. The motor's fast cycle time and wide opening angle make it an efficient and practical choice for residential gates. The Giuno Ultra BT A50 features a high torque of 3,000 newton operating force and can handle up to 30 bar maximum pressure, ensuring powerful and consistent operation. The hydraulic mechanism provides smooth and reliable movement, while the compact design allows for versatile installation in various settings. Specifications SpecificationGIUNO ULTRA BT A50 Power Supply 24V Gate Leaf Length 2m / 5m* Max Leaf Weight 800kg / 400kg Control Panel THALIA P Cycle Time 20 sec Impact Reaction D-Track Frequency of Use Very intensive Opening Angle 110° *Max leaf weight varies depending on the length of the gate leaf. Available Kits KITGIUNOULTRABTA50SGL: Giuno Ultra BT A50 Long Stroke Single Kit (24V) KITGIUNOULTRABTA50: Giuno Ultra BT A50 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Kustos Ultra BT B40 | Long Stroke Single Kit (24V) | Swing Gates Up to 4m & 500kg

Product Overview The Kustos Ultra BT B40 Long Stroke Single Kit is a 24V electromechanical swing gate operator designed for single residences or apartment buildings. This robust operator is capable of handling swing gate leaves up to 4 meters wide and weighing up to 500kg. Featuring a high-speed, almost silent operation, the Kustos Ultra BT B40 provides a reliable and efficient solution for automating your swing gates. The motor is equipped with a covered worm-drive and built-in mechanical stops, and comes with a manual release accessed via a simple triangular key locking system. Key Features Handles Gates Up to 4m & 500kg: Suitable for single residences and apartment buildings. High-Speed Opening and Closing: Ensures quick and efficient operation. Silent Operation: Minimizes noise for a quieter environment. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Exclusive Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Built-in Mechanical Open Stop: Eliminates the need for a ground stop. Product Description The Kustos Ultra BT B40 Long Stroke Single Kit is engineered to automate swing gates up to 4 meters in length and 500kg in weight per leaf. Ideal for single residences and apartment complexes, this 24V gate operator offers robust performance with fast and silent operation. The exclusive Hi-Tech design ensures that the Kustos Ultra BT B40 is not only functional but also stylish, fitting seamlessly into various installation conditions, even with limited space or thick pillars. The 24V technology combined with electronic control helps to keep people safe from impacts without needing additional safety devices. The D-Track technology increases the safety of the automation by ensuring the thrust applied is the minimum necessary to ensure movement, adapting to changes in usage and environmental conditions, thus reducing maintenance operations. The Kustos Ultra BT B40 features easy-to-adjust limit switches, positioned at the top of the motor, with a patented vibration or flashing light feedback function, simplifying the installation process. The motor's fast opening and closing speeds dramatically reduce waiting times, making entry to the property quicker and safer. The unit can also be fitted with BFT’s optional BT BAT buffer battery kit, allowing for continued automation in case of a temporary dip in mains power. Specifications SpecificationKUSTOS BT B40 Control Unit THALIA Board Power Supply 230 V Operator Type Electromechanically operated swing gates Max. Weight of Door/Gate Wing 700 kg Max. Width of Door/Gate Wing 4 m Max. Length Gate Panel Without Electric Lock 3 m Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 355 mm Maximum Angle 124° Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Max. Opening Cycles per Hour 30 Environmental Conditions -20 ÷ 55 °C Protection Rating IP44 Kit Includes 1x BFT Kustos Ultra BT A+B40 24V Electromechanical Operator 1x BFT THALIA L Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITKUSTOSBTB40SGL: Kustos Ultra BT B40 Long Stroke Single Kit (24V) KITKUSTOSBTB40: Kustos Ultra BT B40 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Phobos BT B40 | 4m Long Stroke Twin Kit (24V) | Swing Gates Up to 4m & 500kg

*** Please note, this kit is supplied with Weld on Post brackets only *** For adjustable bolt on post brackets please use the following links: BFT SFR-B Standard Bolt on Post Bracket BFT SFR-B-L Long Stroke Post Bracket     Product Overview The Phobos BT B40 4m Long Stroke Twin Kit is a 24V electromechanical swing gate operator designed for residential use. This robust operator is capable of handling swing gate leaves up to 4 meters wide and weighing up to 500kg. Featuring a high-speed, almost silent operation, the Phobos BT B40 provides a reliable and efficient solution for automating your swing gates. The motor is irreversible and comes with a manual release accessed via a simple triangular key locking system. Built-in obstacle detection is provided through the D-Track torque management system. Key Features Handles Gates Up to 4m & 500kg: Suitable for residential use. High-Speed Opening and Closing: Ensures quick and efficient operation. Silent Operation: Minimizes noise for a quieter environment. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Exclusive Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Product Description The Phobos BT B40 4m Long Stroke Twin Kit is engineered to automate swing gates up to 4 meters in length and 500kg in weight per leaf. Ideal for residential properties, this 24V gate operator offers robust performance with fast and silent operation. The exclusive Hi-Tech design ensures that the Phobos BT B40 is not only functional but also stylish, fitting seamlessly into various installation conditions, even with limited space or thick pillars. The 24V technology combined with electronic control helps to keep people safe from impacts without needing additional safety devices. The D-Track technology increases the safety of the automation by ensuring the thrust applied is the minimum necessary to ensure movement, adapting to changes in usage and environmental conditions, thus reducing maintenance operations. The Phobos BT B40 features easy-to-adjust limit switches, positioned at the top of the motor, with a patented vibration or flashing light feedback function, simplifying the installation process. The motor's fast opening and closing speeds dramatically reduce waiting times, making entry to the property quicker and safer. The unit can also be fitted with BFT’s optional BT BAT buffer battery kit, allowing for continued automation in case of a temporary dip in mains power. Specifications SpecificationPHOBOS BT B40 Board Power Supply 230 V Control Unit THALIA BT A80 Operator Type Electromechanically operated swing gates Operator Weight 5.2 kg Max. Width of Door/Gate Wing 4 m Max. Length Gate Panel Without Electric Lock 3 m Max. Weight of Door/Gate Wing 700 kg Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 470 mm Maximum Angle 130° Movement Time (90°, Excluding Slowdown, with Maximum Gate Size and Weight) Approx. 16 s Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Kit Includes 2x BFT Phobos BT B40 24V Electromechanical Operators 1x BFT THALIA L Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITPHOBOSACB25SGL: Phobos AC B25 2.5m Standard Stroke Single Kit (230V) KITPHOBOSBTB25SGL: Phobos BT B25 2.5m Standard Stroke Single Kit (24V) KITPHOBOSBTB40SGL: Phobos BT B40 4m Long Stroke Single Kit (24V) KITPHOBOSACB50SGL: Phobos AC B50 5m Long Stroke Single Kit (230V) KITPHOBOSACB25: Phobos AC B25 2.5m Standard Stroke Twin Kit (230V) KITPHOBOSBTB25: Phobos BT B25 2.5m Standard Stroke Twin Kit (24V) KITPHOBOSBTB40: Phobos BT B40 4m Long Stroke Twin Kit (24V) KITPHOBOSACB50: Phobos AC B50 5m Long Stroke Twin Kit (230V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Phobos BT B25 | 2.5m Standard Stroke Single Kit (24V) | Fast & Silent Operation

*** Please note, this kit is supplied with Weld on Post brackets only *** For adjustable bolt on post brackets please use the following links: BFT SFR-B Standard Bolt on Post Bracket BFT SFR-B-L Long Stroke Post Bracket     Product Overview The Phobos BT B25 2.5m Standard Stroke Single Kit is a 24V electromechanical swing gate operator designed for residential use. This operator is capable of handling swing gates up to 2.5 meters in length and weighing up to 250kg. The Phobos BT B25 offers a fast operation speed of 15mm per second, minimizing vehicle wait times, and operates with an incredibly silent volume of less than 70dbA. Key Features Handles Gates Up to 2.5m & 250kg: Suitable for residential use. Fast Operation: 15mm per second, reducing waiting times. Silent Operation: Operates at less than 70dbA. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Exclusive Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Product Description The Phobos BT B25 2.5m Standard Stroke Single Kit is designed for automating swing gates up to 2.5 meters in length and 250kg in weight per leaf. Ideal for residential properties, this 24V gate operator offers robust performance with fast and silent operation. The exclusive Hi-Tech design ensures that the Phobos BT B25 is not only functional but also stylish, fitting seamlessly into various installation conditions, even with limited space or thick pillars. The 24V technology combined with electronic control helps to keep people safe from impacts without needing additional safety devices. The D-Track technology increases the safety of the automation by ensuring the thrust applied is the minimum necessary to ensure movement, adapting to changes in usage and environmental conditions, thus reducing maintenance operations. The Phobos BT B25 features easy-to-adjust limit switches, positioned at the top of the motor, with a patented vibration or flashing light feedback function, simplifying the installation process. The motor's fast opening and closing speeds dramatically reduce waiting times, making entry to the property quicker and safer. The unit can also be fitted with BFT’s optional BT BAT buffer battery kit, allowing for continued automation in case of a temporary dip in mains power. Specifications SpecificationPHOBOS BT B25 Board Power Supply 230 V Control Unit THALIA BT A80 Operator Type Electromechanically operated swing gates Operator Weight 4.8 kg Max. Width of Door/Gate Wing 3 m Max. Length Gate Panel Without Electric Lock 2 m Max. Weight of Door/Gate Wing 400 kg Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 360 mm Maximum Angle 119° Movement Time (90°, Excluding Slowdown, with Maximum Gate Size and Weight) Approx. 13 s Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Kit Includes 1x BFT Phobos BT B25 24V Electromechanical Operator 1x BFT THALIA L Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITPHOBOSACB25SGL: Phobos AC B25 2.5m Standard Stroke Single Kit (230V) KITPHOBOSBTB25SGL: Phobos BT B25 2.5m Standard Stroke Single Kit (24V) KITPHOBOSBTB40SGL: Phobos BT B40 4m Long Stroke Single Kit (24V) KITPHOBOSACB50SGL: Phobos AC B50 5m Long Stroke Single Kit (230V) KITPHOBOSACB25: Phobos AC B25 2.5m Standard Stroke Twin Kit (230V) KITPHOBOSBTB25: Phobos BT B25 2.5m Standard Stroke Twin Kit (24V) KITPHOBOSBTB40: Phobos BT B40 4m Long Stroke Twin Kit (24V) KITPHOBOSACB50: Phobos AC B50 5m Long Stroke Twin Kit (230V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Kustos Ultra BT B40 | Long Stroke Twin Kit (24V) | Swing Gates Up to 4m & 500kg

Product Overview The Kustos Ultra BT B40 Long Stroke Twin Kit is a 24V electromechanical operator designed for single residences or apartment buildings. This robust operator is capable of handling swing gate leafs up to 4 meters wide and weighing up to 500kg. Featuring a covered worm-drive and designed for quick and easy installation, the Kustos Ultra BT B40 offers enhanced reliability and convenience with integrated stops, magnetic limit switches, and a magnetic locking pin. Key Features Handles Gates Up to 4m & 500kg: Suitable for residential and apartment buildings. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Built-in Mechanical Open Stop: Eliminates the need for a ground stop. Increased Opening Speed: Reduces waiting times and improves ease of use. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Hi-Tech Design: Modern and compact, suitable for various installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Product Description The Kustos Ultra BT B40 Long Stroke Twin Kit is engineered to automate swing gates up to 4 meters in length and 500kg in weight per leaf. Ideal for residential properties and apartment complexes, this 24V gate operator offers robust performance with its sturdy worm-drive mechanism. The operator is designed for fast and straightforward installation, featuring a covered worm-drive, integrated stops, magnetic limit switches, and a magnetic locking pin. The exclusive D-Track technology ensures the thrust applied is the minimum necessary to ensure movement, adapting to changes in usage and environmental conditions to reduce maintenance needs. The easy-to-adjust limit switches, positioned at the top of the motor, feature a patented vibration or flashing light feedback function, simplifying the installation process. The built-in mechanical open stop removes the need for ground stops, making the setup cleaner and more efficient. The Kustos Ultra BT B40 boasts a Hi-Tech design that is not only stylish but also one of the most compact on the market, making it versatile for various installation conditions, even with limited space or thick pillars. The Easy Set App aids installers in determining the correct positions for installation to achieve the desired opening angle and smooth movement. This operator is also equipped with a personal key for manual release in case of emergencies, ensuring that access is never compromised. Specifications SpecificationKUSTOS BT B40 Control Unit THALIA Board Power Supply 230 V Operator Type Electromechanically operated swing gates Max. Weight of Door/Gate Wing 700 kg Max. Width of Door/Gate Wing 4 m Max. Length Gate Panel Without Electric Lock 3 m Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 355 mm Maximum Angle 124° Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Max. Opening Cycles per Hour 30 Environmental Conditions -20 ÷ 55 °C Protection Rating IP44 Kit Includes 2x BFT Kustos Ultra BT A+B40 24V Electromechanical Operator 1x BFT THALIA L Control Panel 2x BFT Mitto RB 2 Button Transmitters 1x Pair BFT Compacta Safety Photocells 1x BFT Antenna Available Kits KITKUSTOSBTB40SGL: Kustos Ultra BT B40 Long Stroke Single Kit (24V) KITKUSTOSBTB40: Kustos Ultra BT B40 Long Stroke Twin Kit (24V) For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT Kustos Ultra BT B40 | 24V Swing Gate Operator | Up to 4m & 500kg

Product Overview The Kustos Ultra BT B40 gate operator is designed for swing gates up to 4 meters in length and weighing up to 500kg per leaf, making it ideal for smaller residences and apartment buildings. This 24V swing gate opener features a sturdy worm-drive that provides enhanced torque and reliability. The Kustos Ultra BT B40 is also compatible with BFT’s Buffer battery kit, ensuring continuous operation during power outages. Key Features Handles Gates Up to 4m & 500kg: Suitable for residential and apartment buildings. Easy-to-Adjust Limit Switches: Positioned at the top of the motor with exclusive vibration or flashing light feedback function. Built-in Mechanical Open Stop: Eliminates the need for a ground stop. Increased Opening Speed: Reduces waiting times and improves ease of use. 24V Technology: Ensures safety from impacts without the need for supplementary safety devices. D-Track Technology: Ensures the minimum necessary thrust is applied, adapting to usage and environmental conditions. Hi-Tech Design: Modern and compact, suitable for a wide range of installation conditions. Easy Set App: Helps define correct installation positions for optimal operation. Product Description The Kustos Ultra BT B40 Electromechanical Swing Gate Operator is a reliable and efficient solution for automating swing gates up to 4 meters in length and 500kg in weight per leaf. This operator is perfect for residential properties and apartment complexes, providing robust performance with its sturdy worm-drive mechanism. The 24V motor ensures safe operation, minimizing the risk of impacts, while the D-Track technology adapts the force applied according to usage and environmental conditions, reducing maintenance needs. The Kustos Ultra BT B40 features easy-to-adjust limit switches with a patented vibration or flashing light feedback function, simplifying the installation process. The built-in mechanical open stop removes the need for ground stops, making the setup cleaner and more efficient. With an increased opening speed, users benefit from reduced waiting times and enhanced convenience. The Hi-Tech design is not only stylish but also one of the most compact on the market, making it versatile for various installation conditions, even with limited space or thick pillars. For added convenience, the Kustos Ultra BT B40 is compatible with the BFT Buffer battery kit, which provides power during temporary mains power failures. The exclusive Easy Set App aids installers in determining the correct positions for installation to achieve the desired opening angle and smooth movement. This operator is also equipped with a personal key for manual release in case of emergencies, ensuring that access is never compromised. Specifications SpecificationKUSTOS BT B40 Control Unit THALIA Board Power Supply 230 V Operator Type Electromechanically operated swing gates Max. Weight of Door/Gate Wing 700 kg Max. Width of Door/Gate Wing 4 m Max. Length Gate Panel Without Electric Lock 3 m Motor Voltage 24 V Power Consumption 40 W Thrust and Traction Force 2000 N Useful Rod Stroke 355 mm Maximum Angle 124° Type of Limit Switch Magnetic Slowdown Yes Impact Reaction D-Track Locking Mechanical Release Personal key Max. Opening Cycles per Hour 30 Environmental Conditions -20 ÷ 55 °C Protection Rating IP44 For further inquiries or additional information regarding this product, please contact us through our inquiry form.

BFT IGEA BT 24V Single Kit for Swing Gates

Product Overview The BFT IGEA BT 24V Single Kit is an electromechanical operator with an articulated arm, perfect for residential swing gates. Suitable for gate leaves up to 2.5 meters and weighing up to 250 kg, this operator is ideal for installation on large-size pillars thanks to its articulated levers that allow an opening angle of up to 125°. Kit Components 1 x BFT IGEA BT 24V Motor 1 x BFT THALIA L Control Panel 2 x BFT Mitto RB 2 Button Transmitters 1 x Pair BFT Compacta Safety Photocells 1 x BFT Antenna Technical Specifications FeatureDetails Power Supply 24V Gate Leaf Length 2m / 2.5m Maximum Leaf Weight 250kg / 200kg Control Panel THALIA L Cycle Time 15 seconds Impact Reaction D-Track Frequency of Use Intensive Opening Angle Up to 125° Available Kits KITIGEASGL: Igea 230V Single Kit KITIGEABTSGL: Igea BT 24V Single Kit KITIGEA: Igea 230V Twin Kit KITIGEABT: Igea BT 24V Twin Kit Installation Benefits The BFT IGEA BT 24V Single Kit is designed for ease of installation, especially on large pillars. The robust construction ensures reliable and efficient operation, even with frequent use. The kit provides a complete solution for automating residential swing gates, ensuring safety and convenience. Gallery BFT IGEA BT 24V Single Kit

BFT Giuno Ultra BT A20 Hydraulic Motor for Gates up to 2m (24v)

Product Overview The Giuno Ultra BT A20 Hydraulic Motor is a robust and reliable solution for operating swing gates up to 2 meters in length and 300 kilograms in weight. Designed for intensive use, this 24v hydraulic swing gate operator is ideal for both industrial and residential settings, as well as multi-resident sites. The Giuno Ultra BT A20 ensures smooth and efficient gate operation with its advanced technology and durable construction. This BFT swing gate opener features built-in obstacle detection through the exclusive D-Track Torque management system, providing enhanced safety and reliability. The operator is capable of handling very intensive usage, making it a perfect choice for high-traffic areas. Key Features Power Supply: 24v Gate Leaf Length: Up to 2 meters Maximum Leaf Weight: 300kg Control Panel: THALIA P Cycle Time: 14 seconds Impact Reaction: D-Track Torque management system Frequency of Use: Very intensive Opening Angle: 110 degrees Suitable For: Industrial, residential, and multi-resident sites Specifications Model: Giuno Ultra BT A20 Power Supply: 24v Gate Leaf Length: 2 meters Maximum Leaf Weight: 300kg Control Panel: THALIA P Cycle Time: 14 seconds Impact Reaction: D-Track Torque management system Frequency of Use: Very intensive Opening Angle: 110 degrees For more information or to explore our full range of products, please visit our website or contact our customer service team. We offer a further 5% discount on all single orders over £1000 when using code "5%OFF" at checkout.

BFT Botticelli Belt Drive Garage Door Opener Kit 24v (A650) | Up to 10 sqm

Product Overview The Botticelli Belt Drive Garage Door Opener Kit 24v (A650) is a high-performance solution designed for intensive use. It is suitable for garage doors with a surface area of up to 10 square meters. The Botticelli Smart BT A features a compact design and a powerful motor, making it one of the leading products in its range. The simplified mechanical installation process typically requires only half the usual time, ensuring quick and efficient setup. Key Features 24v electromechanical motor for reliable performance Suitable for garage doors up to 10 square meters Compact design for space-saving installation Intensive use capability for frequent operation Simplified installation process reduces setup time Tractive force and thrust of 650 N D-Track impact reaction system for enhanced safety Specifications Voltage: 24v Control Unit: VENERE BT A ETD Door Surface Area: Up to 10 m² Impact Reaction: D-Track Tractive Force and Thrust: 650 N Frequency of Use: Intensive Product Description The Botticelli Belt Drive Garage Door Opener Kit 24v (A650) offers a robust and efficient solution for automating garage doors with a surface area of up to 10 square meters. Designed for intensive use, this opener kit is ideal for residential and commercial applications where frequent operation is required. The 24v electromechanical motor ensures reliable performance, while the compact design allows for easy and space-saving installation. The Botticelli Smart BT A features a simplified mechanical installation process, significantly reducing setup time compared to traditional garage door openers. With a tractive force and thrust of 650 N, this opener is capable of handling large and heavy doors with ease. The D-Track impact reaction system provides enhanced safety, ensuring the door stops and reverses upon detecting an obstruction. Equipped with the VENERE BT A ETD control unit, the Botticelli Belt Drive Garage Door Opener Kit offers precise control and easy programming. Whether you are looking to automate your home garage door or need a reliable solution for a commercial setting, the Botticelli 24v opener kit delivers exceptional performance and durability. Kit Includes: 1 x Botticelli Smart BT A 24v Motor 1 x VENERE BT A ETD Control Unit Enhance your garage door automation with the Botticelli Belt Drive Garage Door Opener Kit. Order now for a reliable and efficient solution. Order before 2pm for next working day delivery, subject to stock availability.