GIBIDI GROUND KIT | Underground Electromechanical Twin Kit for Leaf up to 3.5m

Product Overview GROUND KIT - Underground Electromechanical Twin Kit for Leaf up to 3.5 meters is available in both 230Vac and 24Vdc versions. Designed for swinging gates of medium dimensions and weight, it is suitable for both residential and intensive use. Key Features Easy to install with a self-supporting foundation box Silent and fast operation, opening in just 12 seconds Adjustable opening speed in the 24Vdc version Robust construction with steel and bronze-aluminium Adjustable anti-crushing sensitivity for enhanced safety Compliant with EN12453 safety standards Painted reduction gear for protection against atmospheric and environmental agents Product Description EASY TO INSTALL Thanks to the special self-supporting foundation box. Ambidextrous motor and pre-assembled accessories. SILENT AND FAST Only 12 seconds to open the gate! Extremely silent, due to the materials used and tidy finishing of the gears. In the 24Vdc version, it is possible to adjust the opening speed. TECHNOLOGICAL AND SAFE GROUND is built entirely in steel and bronze-aluminium, robust and reliable over time. In the 24Vdc version, it is possible to adjust the anti-crushing sensitivity to enhance safety, in compliance with EN12453 standards. The unlocking key has a European profile. A COMPLETE AND RELIABLE RANGE GROUND meets all aesthetic needs of your gate and remains reliable over time, thanks to the completely painted reduction gear, protecting it from atmospheric and environmental agents. Specifications FeatureGROUND610GROUND624 Type of use Residential Heavy Duty Frequency of use 30% Heavy Duty Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 400W 150W Protection degree IP67 IP67 Shaft rotation speed 7°/s 7°/s Max torque 530 Nm 320 Nm Adjustable force Electronic Electronic Adjustable speed Electronic ** Electronic ** Max leaf width 3.5 m * 3.5 m * Max door opening angle 110° 110° Operating temperature -20°C to +60°C -20°C to +60°C Encoder/limit switch LS are optional limit switches O/C LS are optional limit switches O/C Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 11.1 Kg 11.1 Kg NOTE: * In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ComponentKIT GROUND610KIT GROUND624 GROUND Operators 2 2 AJ49300 Self-supporting painted foundation box 2 2 AS06320 for 1 or 2 motors (F4) 1 Not Applicable AS06399 for 1 or 2 motors (BA 24) Not Applicable 1 AU02910 2 channels plug-in receiver board for control units 1 1 Complete flashing lamp device 1 1 AU03100 MAKO remote control 433Mhz 2 2 AU01940 wall mounted key selector model DCS100 1 1 AU02250 pair of DCF180 wall mounted photocells 1 1 AJ75800 gate warning plate 1 1 Note: The kit is supplied in multiple packages.

GIBIDI AGO KIT K160/BFSLT & K164/BFSLT | Above Ground Kit for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO KIT - Above Ground Kit for Gates up to 4 meters - is an electromechanical operator kit available in both 230 Vac and 24 Vdc versions with an encoder. It is designed for medium and large swinging gates, suitable for residential and heavy use applications. Key Features Easy to install with adjustable brackets Silent and fast movement with steel, bronze-aluminium gears 24 Vdc version includes encoder for automatic programming and anti-crushing sensitivity Complies with EN 12453 safety standards Compact design, made with die-cast aluminium and stainless steel Optional battery kit for operation during power cuts Product Description EASY TO INSTALL Thanks to the adjustable brackets, it is not necessary to weld for installation. SILENT AND FAST Gears in steel, bronze-aluminium allowing for a high and adjustable speed of movement. TECHNOLOGICAL AND SAFE The 24 Vdc version is provided with an encoder to manage automatic programming and the adjustment of integrated anti-crushing sensitivity. Complies with the highest safety level as per EN 12453 standards. DESIGN AND RELIABILITY The most compact in its category with a tapered and simple design, suitable for every kind of gate. Made completely in die-cast aluminium and steel powder coating painted. The rod is in stainless steel. POWER CUT/BATTERY BACK-UP By the use of an optional battery kit, the gates can operate during the loss of a mains power supply. Specifications FeatureAGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width* 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg NOTE: *In case of blind leaf or wind presence or leaf over 2.5 m, the use of the electric lock is necessary What's in the Box ItemKIT AGO400 (K160/BFSLT)KIT AGO424E (K164/BFSLT) AGO operators 2x 2x Gate warning plate (AJ75800) 1x 1x MAKO remote control 433Mhz (AU03100) 2x 2x Wall mounted key selector model DCS100 (AU01940) 1x 1x Pair of DCF180 wall mounted photocells (AU02250) 1x 1x Complete flashing lamp device (70710 - 70724) 1x 1x Radio receiver board 1x 1x For 1 or 2 motors (F4) (AS06320) 1x Not Applicable For 1 or 2 motors (BE24) (AS06250) Not Applicable 1x 2 channels plug-in receiver board for control units (AU02910) 1x Not Applicable

GIBIDI AGO | Above Ground Operator for Gates up to 4 m | 230 Vac & 24 Vdc

Product Overview The AGO Above Ground Operator is a versatile electromechanical operator designed for medium to large swinging gates, accommodating gate lengths up to 4 meters. Available in both 230 Vac and 24 Vdc versions, this operator is suitable for residential and heavy-duty applications. The AGO operator is engineered for easy installation, silent and fast operation, and incorporates advanced technological features for enhanced safety and reliability. Key Features Available in 230 Vac and 24 Vdc versions with encoder Suitable for gates up to 4 meters in length Easy installation with adjustable brackets, no welding required Silent operation with steel and bronze-aluminium gears Adjustable speed of movement Complies with EN 12453 safety standards Compact design with die-cast aluminium and stainless steel rod Optional battery kit for operation during power outages Product Description Specifications  AGO400AGO424E Type of use Residential Residential/Heavy Duty Frequency of use 30% 90% Motor power supply 230 Vac - 50/60 Hz 24 Vdc Absorbed power 1.5 A 0.5 - 5.5 A Protection degree IP43 IP43 Rod speed 18 mm/s 18 mm/s Max rod stroke 400 mm 400 mm Max thrust force 1600 N 1500 N Adjustable force Electronic Electronic Adjustable speed Yes Yes Max leaf width * 4 m * 4 m * Operating temperature -25°C to +60°C -25°C to +60°C Encoder/limit switch No Encoder Type of lubrication Grease GBD WH-01 Grease GBD WH-01 Weight of the unit 5.5 Kg 5.5 Kg The AGO Above Ground Operator is designed for straightforward installation, eliminating the need for welding thanks to its adjustable brackets. It features a compact and tapered design that fits aesthetically with any gate style, made entirely of die-cast aluminium with a stainless steel rod for enhanced durability and reliability. This operator ensures a silent and fast operation due to its high-quality steel and bronze-aluminium gears. The 24 Vdc version includes an encoder for automatic programming and integrated anti-crushing sensitivity, meeting the highest safety standards as per EN 12453. Additionally, the optional battery kit ensures gate operation during power outages. Installation and Usage The AGO operator is easy to install with its pre-cabled components and adjustable brackets. It provides a smooth and quiet operation, with adjustable speed to meet specific requirements. Suitable for both residential and heavy-duty use, the AGO operator is a versatile solution for gates up to 4 meters wide. Its robust construction and advanced safety features make it an ideal choice for various gate automation applications. NOTE: In case of blind leaf or wind presence, or if the leaf is over 2.5 meters, the use of an electric lock is necessary.

GIBIDI SERRA320 (15840) | 24V Motor Arm | Heavy Duty Swing Gate Operator

Product Overview The SERRA320 is a 24V DC electromechanical motor arm designed for medium to large swing gates, ideal for heavy-duty applications. Featuring an integrated encoder and adjustable brackets, this operator ensures a straightforward and efficient installation process. The motor arm is engineered for silent and fast operation, utilizing high-quality materials such as steel and bronze-aluminium for the gears, providing adjustable speed and superior performance. Key Features 24V DC electromechanical operator with integrated encoder Pre-cabled operator and encoder for easy installation Includes adjustable brackets and integrated door retainers Gears made from steel and bronze-aluminium for durability Adjustable speed of movement for precise control Extremely silent operation Complies with EN12453 safety standards Embedded anti-crushing sensitivity in control units Product Description Specifications  SERRA320 Type of use Heavy Duty Frequency of use 40% Motor power supply 24 Vdc Absorbed power 100W Protection degree IP44 Rod speed 20 mm/s Max rod stroke 320 mm Max thrust force 1500 N Adjustable force Electronic Adjustable speed Yes ** Max leaf width 3.5 m * Operating temperature -20°C to +60°C Encoder/limit switch Encoder Type of lubrication Grease GBD WH-01 Weight of the unit 8.2 Kg The SERRA320 motor arm is built for reliability and high performance. It is equipped with a latest-generation encoder and a powerful motor suitable for heavy use. The gears and dragging screw are fully protected, ensuring long-term durability. The Gibidi control units include embedded anti-crushing sensitivity, providing enhanced safety as per EN12453 standards. NOTE: In case of blind leaf or wind presence or leaf over 2.5 m, the use of an electric lock is necessary. Adjustable speed is available through the use of the BE24 control board. Installation and Operation Installing the SERRA320 is straightforward thanks to its pre-cabled components and included adjustable brackets. The integrated door retainers and the ambidextrous design of the motor further simplify the setup. Once installed, the operator provides a fast and silent operation, opening gates with high precision and reliability. The adjustable speed and electronic force regulation allow for a tailored performance to meet specific installation requirements. The SERRA320 is suitable for both residential and commercial applications, offering a robust solution for gates with a maximum width of 3.5 meters. Its high-quality construction and advanced technological features make it an ideal choice for demanding environments.

GIBIDI KIT FLOOR | Hydraulic Underground Automation Kit | 230Vac & 24Vdc, 150° & 180° Opening

Product Overview The KIT FLOOR Hydraulic Underground Automation Kit is a comprehensive solution for automating medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this kit is suitable for residential and heavy-duty use. The FLOOR operators are designed for easy installation, silent and fast operation, and provide advanced technological safety features. This kit includes all necessary components for a reliable and efficient gate automation system. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The KIT FLOOR Hydraulic Underground Automation Kit includes all necessary components for a comprehensive gate automation system. The FLOOR operators are engineered for easy installation, thanks to the special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. Kit Includes  K870/BFSLTK875/BFSLTK880/BFSLTK884/BFSLT FLOOR Operators Included Included Included Included AJ49000 Self-supporting painted foundation box Included Included Included Included AJ01400 Limit switches kit Included Not Applicable Included Not Applicable AS06320 For 1 or 2 motors (F4) Included Not Applicable Included Not Applicable AS06300 For 1 or 2 motors (BA 24) Not Applicable Included Not Applicable Included AU02910 2 channels plug-in receiver board for control units Included Included Included Included 70710 - 70724 Complete flashing lamp device Included Included Included Included AU03100 MAKO remote control 433Mhz Included Included Included Included AU01940 Wall mounted key selector model DCS100 Included Included Included Included PLEASE NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.

GIBIDI FLOOR | Hydraulic Underground Operator | 230Vac & 24Vdc, Heavy Duty, 150° & 180° Opening

Product Overview The FLOOR Hydraulic Underground Operator is a robust and reliable solution for medium-sized swinging gates. Available in both 230Vac and 24Vdc versions, this operator is suitable for residential and heavy use. The FLOOR operator is designed for easy installation, silent and fast operation, and provides advanced technological safety features. Its high-quality materials and in-depth quality testing ensure a long-lasting and efficient performance. Key Features Available in 230Vac and 24Vdc versions Suitable for medium-sized swinging gates Easy installation with a special foundation box Ambidextrous motor for versatile installation Silent and fast operation, opening gates in just 12 seconds Adjustable opening speed (24Vdc version) Hydraulic closed-circuit technology without air Adjustable speed and force regulator Valves for reversible, irreversible, or fixed modality Adjustable anti-crushing sensitivity (24Vdc version) Complies with EN12453 safety standards European profile key for unlocking device Opening angles of 150° and 180° available IP67 protection degree Product Description Specifications  FLOOR 230V 150°FLOOR 230V 180°FLOOR 24V 150°FLOOR 24V 180° Type of use HEAVY DUTY HEAVY DUTY HEAVY DUTY HEAVY DUTY Frequency of use 40% 40% 80% 80% Motor power supply 230 Vac - 50/60 Hz 230 Vac - 50/60 Hz 24 Vdc 24 Vdc Absorbed power 190W 190W 120W 120W Protection degree IP67 IP67 IP67 IP67 Shaft rotation speed 6°/s 7°/s 6°/s 7°/s Max torque 320 Nm 300 Nm 320 Nm 300 Nm Adjustable force HYDRAULIC HYDRAULIC ELECTRONIC ELECTRONIC Adjustable speed YES YES YES YES Max leaf width 3,0 m * 2,5 m * 3,0 m * 2,5 m * Max door opening angle 150° 180° 150° 180° Operating temperature -20°C +60°C -20°C +60°C -20°C +60°C -20°C +60°C Encoder/limit switch OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES OPTIONAL LIMIT SWITCHES Type of lubrication OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 OIL GBD PH-03 Weight of the unit 17 kg 16 kg 17 kg 16 kg The FLOOR Hydraulic Underground Operator is engineered for easy installation, thanks to its special foundation box and ambidextrous motor. The unique fixing system ensures that even incorrectly fixed doors can be adjusted, providing flexibility and reliability. Designed for silent and fast operation, the FLOOR operator can open gates in just 12 seconds. The choice of materials and the precise finishing of the gears contribute to its extremely quiet performance. The 24Vdc version offers adjustable opening speed and anti-crushing sensitivity, making it safer to use and compliant with EN12453 standards. This operator is available in both 150° and 180° opening models, offering versatility for different gate designs and requirements. Its robust construction and high-quality materials ensure a reliable and durable performance, making it an ideal choice for residential and heavy-duty applications. NOTE: In case of blind leaf or wind presence or leaf over 2.0 m, the use of an electric lock is necessary. All operators are supplied in BAC mode (irreversible). The installer can modify this parameter.