ROGER TECHNOLOGY SL/180/R - Swing Gate Motor | Up to 1.8m | Without Arms | Reversible | 36V

Product Overview The SL/180/R Swing Gate Motor is designed for intensive use, supporting swing gates with leaves up to 1.8m. This low voltage electromechanical gear motor operates on 36V and features brushless IPU technology with an integrated digital encoder. The motor is reversible, locking in the open and closed positions while the power is on, but unlocking as the power goes off, providing an emergency free exit during power cuts. The motor comes without arms, which can be purchased separately (see Accessories for arms). Key Features 36V power supply Reversible motor Suitable for swing gates with leaves up to 1.8m Brushless IPU technology Integrated digital magnetic encoder (4096 PPR) Intensive use Specifications Power line supply 230V AC 50Hz Motor power supply 36V Power rating 200W Frequency of use Intensive use Torque 150 N m Operating temperature -20 to +55°C Protection level IP44 Reductor Type Reversible Manoeuvre speed 0.6 - 6.6 Rpm Opening time 6-30 s Limit switch Mechanical stop on opening and closing only with LT341 accessory Recommended digital controllers F70/IPU36/BOX, F70/IPU36/BOX/SL Encoder Digital magnetic encoder SENSORED, 4096 PPR Batteries recovery 3 external batteries 12V DC 4.5 Amp/h (on external box) - optional Operating cycles per day 400000 (opening/closing - 24 hours no stop) Maximum dimension product (L x W x H) 492 x 102 x 144.5 mm Accessories KT250 KT218 LT340 - Arms short for articulated SLED series LT341 - Slide arm lever for articulated SLED series