NICE B-FAB5024-DKIT Underground Automation Kit

Product Overview The B-FAB5024-DKIT is a complete underground swing gate automation kit designed for heavy-duty residential and multi-residential applications. Supporting gates up to 5m in width or 900kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control of larger gate installations. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 5m width or 900kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Semi-intensive duty cycle (45 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration LCD display control panel Specifications ParameterB-FAB5024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 7 Power Rating (W) 170 Max Gate Weight per Leaf (kg) 900 Max Gate Length per Leaf (m) 5 Motor Speed (rpm) 0.8 Torque (Nm) 400 Working Cycle (cycles/hour) 45 Gate Speed 24 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 13.3 Foundation Box Weight (kg) 20.3 Foundation Box BFABBOX (painted) / BFABBOXI (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x BFAB5024 24V underground motors 2x BFABBOX foundation boxes 1x MC824H control panel with BlueBUS and LCD display 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.  

NICE L-FAB4024-DKIT | Underground Twin Gate Kit | Max Leaf 4m / 650Kg | 24V

Product Overview The L-FAB4024-DKIT is a complete underground swing gate automation kit designed for residential and multi-residential applications. Supporting gates up to 4m in width or 650kg per leaf, this 24V DC system features concealed installation for optimal aesthetics while providing reliable electromechanical operation with magnetic encoder and mechanical limit switches for precise control. Key Features 24V DC power supply with 230V AC mains Underground concealed installation Non-reversible electromechanical gearmotor Supports gates up to 4m width or 650kg per leaf Magnetic encoder for precise positioning Mechanical limit switches in closing IP67 waterproof protection class BlueBUS technology compatibility Intensive duty cycle (60 cycles/hour) Standard 110° opening (360° optional) Manual release from inside and outside Built-in obstacle detection Solar ready configuration Specifications ParameterL-FAB4024-DKIT Power Supply 230V AC - 50Hz Motor Voltage 24V DC Current Draw (A) 5 Power Rating (W) 120 Max Gate Weight per Leaf (kg) 650 Max Gate Length per Leaf (m) 4 Motor Speed (rpm) 1 Torque (Nm) 300 Working Cycle (cycles/hour) 60 Gate Speed 18 seconds for 90° Opening Angle 110° standard (360° optional) Protection Class IP67 Operating Temperature (°C) -20 to +50 Motor Dimensions (mm) 400 x 325 x 152 Motor Weight (kg) 12.5 Foundation Box BFABBOX4 (painted) / BFABBOX4I (stainless) Control Unit MC824H with BlueBUS Encoder Type Magnetic Kit Type Twin gate complete system Accessories Kit Contents: 2x LFAB4024 24V underground motors 2x BFABBOX4 foundation boxes 1x MC824H control panel with BlueBUS 2x ON2E two-button transmitters 1x EPMB photocell pair with BlueBUS 1x OXI radio receiver 2x MEA3 lever release mechanisms Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE M-FAB3024HS-DKIT | High-Speed Underground Gate Kit | Max Leaf 3m / 300Kg | 24V

Product Overview The NICE M-FAB3024HS-DKIT is a state-of-the-art solution for automating swing gates with leaves up to 3 meters in length or weighing up to 300kg. Designed for intensive use, this 24V DC kit features a magnetic encoder for precise control and rapid opening, achieving a 90-degree opening in approximately 8 seconds. Key Features Rapid Operation: 90-degree opening in about 8 seconds Reliable and Resistant: Solid internal metal parts and new IP67 waterproof die-cast aluminum Foundation Box Total Freedom of Choice: Release from inside and outside with key-operated models or lever version Simple to Use: Mechanical stop system on closure with standard opening max. 110° and optional opening 360° Compatibility: Fully compatible with the previous Metro series Moonclever MC824H Control Unit Simple programming with a single key Automatic memorization of limit switches with self-learning function Automatic fault diagnostics Programming of pause time Pedestrian pass door function Deceleration on opening and closing Dual technology obstacle detection Operation during power failure with optional batteries (PS324) housed inside the gear motor Provision for connecting latest generation resistive sensitive edges Kit Includes 2 x NICE MFAB3024HS 24V Motors 2 x NICE MFABBOX Foundation Boxes 2 x NICE ON2E 2 Button Transmitters 1 x NICE MC824H Control Panel 1 x NICE EPMB Pair of Photocells 1 x NICE OXI 4 Channel Receiver 2 x NICE MEA3 Release Mechanisms Technical Specifications SpecificationDetails Max length per gate 3000mm Installation Underground Motor voltage 24V Max weight per gate 300kg Max opening angle 110 degrees Locking method Mechanically locking motor Motor type Electromechanical Gate speed 8 seconds for 90 degrees Duty cycle Intensive Obstacle detection Built-in Mains power supply 230V Category Swing Gate Kit Why Choose the M-FAB3024HS-DKIT? The M-FAB3024HS-DKIT provides a comprehensive solution for fast and reliable swing gate automation. With easy installation, robust design, and advanced control features, it ensures your gates operate smoothly and efficiently.

NICE SPY800KCE Kit for Sectional and Up-and-Over Door Automation, 800 N

Product Overview The SPY800KCE kit is designed for automating sectional doors up to 12.5 sqm and up-and-over doors up to 14 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY800: SPY800 Gearmotor, 800 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 800 N Max Sectional Door Size: 12.5 sqm Max Up-and-Over Door Size: 14 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 800 N Max Sectional Door Size 12.5 sqm Max Up-and-Over Door Size 14 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY800KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 12.5 sqm and 14 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY650KCE Kit for Sectional and Up-and-Over Door Automation, 650 N

Product Overview The SPY650KCE kit is designed for automating sectional doors up to 10.5 sqm and up-and-over doors up to 11.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, backup batteries, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY650: SPY650 Gearmotor, 650 N 1 x SPYBOXB: Control unit with built-in LED courtesy light, receiver or OXI connection, and backup batteries 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 650 N Max Sectional Door Size: 10.5 sqm Max Up-and-Over Door Size: 11.5 sqm Control Unit: Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 650 N Max Sectional Door Size 10.5 sqm Max Up-and-Over Door Size 11.5 sqm Control Unit Built-in with LED courtesy light, receiver, and backup batteries Transmitter Frequency 433.92 MHz Benefits: The SPY650KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 10.5 sqm and 11.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light and backup batteries. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light, receiver, and backup batteries facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE SPY550KCE Kit for Sectional and Up-and-Over Door Automation, 550 N

Product Overview The SPY550KCE kit is designed for automating sectional doors up to 9 sqm and up-and-over doors up to 10.5 sqm. This comprehensive kit includes a gear motor, control unit with LED courtesy light and receiver, and a 2-channel transmitter, providing a seamless solution for your door automation needs. Kit Includes: 1 x SPY550: SPY550 Gearmotor, 550 N 1 x SPYBOX: Control unit with built-in LED courtesy light and receiver 1 x FLO2RE: 433.92 MHz 2-channel transmitter Era Flor Key Features: Motor Force: 550 N Max Sectional Door Size: 9 sqm Max Up-and-Over Door Size: 10.5 sqm Control Unit: Built-in with LED courtesy light and receiver Transmitter Frequency: 433.92 MHz Easy Installation: Guides not included, ensuring compatibility with your existing setup Specifications: SpecificationDetails Motor Force 550 N Max Sectional Door Size 9 sqm Max Up-and-Over Door Size 10.5 sqm Control Unit Built-in with LED courtesy light and receiver Transmitter Frequency 433.92 MHz Benefits: The SPY550KCE kit offers numerous benefits, including robust and reliable automation for sectional and up-and-over doors up to 9 sqm and 10.5 sqm, respectively. The kit ensures smooth and efficient operation, enhanced security with the 2-channel transmitter, and added convenience with the LED courtesy light. Installation and Setup: This kit provides all necessary components for a straightforward installation. The built-in control unit with LED courtesy light and receiver facilitates easy setup and operation. The included transmitter ensures reliable control of your door automation system. Note that guides are not included, allowing compatibility with your existing setup.

NICE Irreversible WG3524HS 24 Vdc fast with magnetic encoder mechanical stop on opening and closing

WINGO WG3524HS For hi-speed automation of swing gates with leaves up to 3 m or 200 kg, ideal for residential applications. 24 Vdc electromechanical gear motor, surface mounted, with magnetic encoder.   Irreversible, 24 Vdc, fast, with magnetic encoder, mechanical stop on opening and closing

Nice SPINKIT SPIN11KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN11KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3m pre-assembled guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Pre-assembled 3-metre guide for easy installation Product Description The SPINKIT SPIN11KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-assembled 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN11KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3 metre section.

Nice SPINKIT SPIN10KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINKIT SPIN10KCE is a comprehensive automation kit for sectional doors up to 8.8 m² and up-and-over garage doors up to 9.8 m². Featuring a belt drive and a 3x1 m-sections linear guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Belt drive for smooth and quiet operation 24 Vdc gear motor with incorporated control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINKIT SPIN10KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of three 1-metre guide sections provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 8.8 m² Max Area per Up-and-Over Door 9.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINKIT SPIN10KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6011: Gear motor with incorporated control unit and plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre sections.

Nice SPIN23KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN23KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN23KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN23KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SNA30: Guide (thickness 35 mm) in one 3-metre section.

Nice SPIN22KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN22KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Two guide sections: one 3-metre and one 1-metre, both 35mm thick, for flexible installation Product Description The SPIN22KCE is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The inclusion of both a 3-metre and a 1-metre guide section provides flexibility in installation, making it easier to adapt to various door sizes and configurations. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN22KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x Guide (thickness 35 mm): 3-metre section. 1 x Guide (thickness 35 mm): 1-metre section.

Nice SPIN21KCE | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPIN21KCE is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring a pre-mounted 3m guide, this kit provides a complete solution for door automation in residential and commercial properties. Key Features Pre-mounted 3m guide for easy installation 24 Vdc gear motor with built-in SNA2 control unit Compatible with Nice BlueBUS technology Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Easy integration with Solemyo and Opera systems Product Description The SPIN21KCE is designed for durability and high performance. The electromechanical gear motor, combined with a built-in SNA2 control unit and SMXI plug-in receiver, allows for efficient and straightforward control. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. The pre-mounted 3m guide simplifies installation, providing a seamless setup process. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPIN21KCE motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in SNA2 control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 1 x SPIN21KCE: Pre-mounted 3-metre guide section.

Nice SPINBUSKIT20 | Door Automation Kit | For Sectional & Up-and-Over Doors

Product Overview The SPINBUSKIT20 (SPIN20KCE) is a comprehensive automation kit for sectional doors up to 10.5 m² and up-and-over garage doors up to 11.8 m². Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for door automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc gear motor with built-in control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Three 1-metre guide sections for flexible installation Product Description The SPINBUSKIT20 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete door automation system: 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section. Specifications SpecificationDetails Door Type Sectional and Up-and-Over Doors Motor Voltage 24V DC Max Area per Sectional Door 10.5 m² Max Area per Up-and-Over Door 11.8 m² Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The SPINBUSKIT20 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sectional and up-and-over doors in different environments. Included in the Box 1 x SN6021: Gear motor with built-in control unit and SMXI plug-in receiver. 1 x FLO2RE: Transmitter 433.92 MHz, 2 channels. 3 x Guide (thickness 35 mm): 1-metre section.

Nice ROBUSKIT 600 | Sliding Gate Motor Kit | For Gates up to 600kg

Product Overview The ROBUSKIT 600 (RB600KCE) is a comprehensive automation kit for sliding gates weighing up to 600 kg. Featuring Nice BlueBUS technology, this kit is compatible with Solemyo and Opera systems, providing a complete solution for gate automation in residential and commercial properties. Key Features Nice BlueBUS technology for simple two-wire connection 24 Vdc irreversible motor with incorporated control unit Compatible with Solemyo and Opera systems Electromechanical limit switch for precise operation Temperature sensor adapts motor power to climatic conditions Aluminium release handle for easy manual opening Protected compartment for control unit and buffer batteries Product Description The ROBUSKIT 600 is designed for durability and high performance. The electromechanical gear motor, combined with Nice BlueBUS technology, allows for efficient and straightforward control using only two wires. This motor is ideal for intensive use, ensuring reliable operation even under heavy loads. The built-in temperature sensor optimizes motor performance by adjusting power according to the surrounding climatic conditions. Additionally, the motor is equipped with a secure compartment to protect the control unit and optional buffer batteries. This kit includes everything needed for a complete gate automation system: 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver for Nice BlueBUS connections. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard. Specifications SpecificationDetails Gate Type Sliding Gate Motor Voltage 24V DC Max Weight per Gate 600 kg Locking Method Mechanically Locking Motor Wired or Wireless Wired Motor Type Electromechanical Protection Rating IP 44 Gate Speed 16 m/min Duty Cycle Intensive Mains Power Supply 230V AC Additional Information The ROBUSKIT 600 motor is built for both safety and convenience. The Nice BlueBUS technology not only simplifies installation but also enhances the motor's reliability and functionality. This kit is suitable for various applications, providing a versatile solution for automating sliding gates in different environments. Included in the Box 1 x RB600: Irreversible electromechanical gear motor with incorporated control unit and OXI plug-in receiver. 1 x ON2E: Transmitter 433.92 MHz, 2 channels. 1 x EPMB: Pair of outdoor photocells for Nice BlueBUS network connections. 1 x EKS: Key selector ERA series for outdoor installation. 1 x ELDC: LED flashing light, 12-36 Vdc, for preset control units. 1 x TS: Signboard.

NICE TOONA 5 HS | TO5024HS Fast 24 Vdc Motor with Magnetic Encoder for Swing Gates

Product Overview The TOONA 5 HS (TO5024HS) is a high-speed, irreversible 24 Vdc motor designed for the automation of swing gates with leaves up to 5 meters or 400 kg. This electromechanical gear motor is ideal for both residential and industrial applications, offering fast operation with a magnetic encoder and mechanical stops on opening and closing. Key Features Irreversible, high-speed 24 Vdc motor Magnetic encoder for precise control Mechanical stops on opening and closing Suitable for swing gates with leaves up to 5 meters or 400 kg Surface mounted electromechanical gear motor Max opening angle of 120 degrees Mechanically locking motor IP44 protection rating Gate speed: 16 seconds for 90 degrees Intensive duty cycle Mains power supply: 230v Product Description TOONA 5 HS | TO5024HS Fast 24 Vdc Motor with Magnetic Encoder for Swing Gates The TOONA 5 HS (TO5024HS) motor is specifically designed for the fast and efficient automation of swing gates. With a powerful 24 Vdc motor and magnetic encoder, it ensures precise control and smooth operation. The mechanical stops on opening and closing add an extra layer of reliability, making it an excellent choice for both residential and industrial settings. Applications and Compatibility This motor is suitable for swing gates with a maximum length of 5 meters and a maximum weight of 400 kg per gate. It is designed for above-ground installation and provides a maximum opening angle of 120 degrees. The TOONA 5 HS is compatible with a wide range of swing gate setups, ensuring versatile application. Durability and Performance With an IP44 protection rating, the TO5024HS motor is built to withstand various environmental conditions, ensuring long-term durability. The motor operates at a speed of 16 seconds for a 90-degree opening, making it one of the fastest options available. Its intensive duty cycle means it can handle frequent use, ideal for busy residential or industrial locations. Power and Control The motor runs on a 24 Vdc power supply and requires a 230v mains power connection. Its electromechanical design and mechanically locking motor provide reliable performance and secure operation, preventing unauthorized manual opening of the gate.

NICE TENKIT TNLKCE | Irreversible Motor with Control Unit and Receiver for Doors up to 9m²

Product Overview The TENKIT TNLKCE is an irreversible 24 Vdc motor designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version features an incorporated control unit and receiver, a courtesy light, and a mechanical limit switch, ensuring reliable and efficient operation. Key Features Irreversible 24 Vdc motor Incorporated control unit and receiver Courtesy light for enhanced visibility Mechanical limit switch for precise operation Suitable for doors up to 9m² Compatible with projecting and non-projecting up-and-over doors Compatible with jointed doors Product Description TENKIT TNLKCE Irreversible Motor with Control Unit and Receiver The TENKIT TNLKCE motor is specifically designed for projecting and non-projecting up-and-over doors up to 9m² and jointed doors. This upgraded version includes a 24 Vdc irreversible electromechanical gear motor with an incorporated control unit and plug-in receiver, a courtesy light, and a mechanical limit switch. The motor provides reliable performance and ease of use. Complete Kit for Easy Installation This comprehensive kit includes: 1 x TNKCE / TNLKCE irreversible electromechanical gear motor with control unit and plug-in receiver, courtesy light, and electromechanical limit switch 1 x TNA5 pair of standard telescopic arms 1 x TNA38 driving devices 1 x FLO2RE transmitter 433.92 MHz, 2 channels 1 x TS signboard Enhanced Features and Compatibility The TENKIT TNLKCE motor includes a courtesy light for improved visibility and safety. The mechanical limit switch ensures precise operation, making it suitable for various door types and applications. The motor is compatible with both projecting and non-projecting up-and-over doors, as well as jointed doors, providing versatile use.

NICE Big Metro/BIG-FAB Motor Only BM5024 | Swing Gate Motor | For Gates Up to 5M

Product Overview The Big Metro/BIG-FAB BM5024 is a powerful and reliable motor designed for swing gates with leaves up to 5 meters, suitable for underground installation. This irreversible electromechanical gear motor operates on 24Vdc and features a magnetic encoder and mechanical stops. It ensures smooth and efficient gate operation, making it ideal for both residential and commercial applications. Key Features Irreversible electromechanical gear motor 24Vdc with magnetic encoder and mechanical stops Underground installation Chamfered foundation boxes with mechanical stop on opening Available in stainless steel (BMBOXI) for extreme conditions Cataphoresis paint finish (BMBOX) for high corrosion resistance Release from inside or outside with key or lever-operated models Standard opening to 110°, optional 360° Compatible with Moonclever MC824H control unit Self-learning of travel limits on opening and closing Self-diagnostics of faults Programming of pause time Pass door feature Deceleration on opening and closing Dual technology obstacle detection Operation in the event of power failure with optional rechargeable batteries (PS324) Provision for connection of latest generation sensitive edges Product Description The Big Metro/BIG-FAB BM5024 is designed to provide robust and reliable performance for swing gates with leaves up to 5 meters. This underground installation motor features an irreversible electromechanical gear system operating on 24Vdc with a magnetic encoder and mechanical stops, ensuring precise and efficient gate movement. Functionality This motor offers maximum freedom of choice with release options from inside or outside, available in two key or lever-operated models that are easy to operate with one hand. The chamfered foundation boxes come with mechanical stops on opening and are available in stainless steel (BMBOXI) for extreme conditions or with a cataphoresis paint finish (BMBOX) for high corrosion resistance. Usage The BM5024 motor is ideal for intensive use, compatible with the Moonclever MC824H control unit. It features simple programming via a single key, self-learning of travel limits on opening and closing, self-diagnostics of faults, programming of pause time, pass door feature, deceleration on opening and closing, and dual technology obstacle detection. In the event of a power failure, it can operate with optional rechargeable batteries (PS324). Additionally, it has provisions for connecting the latest generation sensitive edges. What's in the Box The package includes: Big Metro/BIG-FAB BM5024 motor Installation instructions Mounting hardware

NICE TOONA HS Series High-Speed Swing Gate Automation Kits

Product Overview The NICE TOONA HS swing gate motor kits provide complete high-speed automation solutions for twin swing gates in residential and industrial applications. These electromechanical gearmotors feature 24V DC operation with magnetic encoders, supporting gate leaves from 400kg to 1450kg with rapid opening times. The surface-mounted design ensures quick installation with minimal excavation requirements. Key Features 230V AC power supply with 24V DC motors High-speed operation with magnetic encoder precision Patented internal component arrangement for quiet operation Robust aluminium shell construction with weather resistance BlueBUS technology for simplified two-wire installation Integrated obstacle detection and safety monitoring Adjustable acceleration and deceleration settings MC824H Moonclever control unit with display programming Surface-mounted design for easy installation Battery backup and solar power compatibility Maximum opening angle up to 120 degrees Die-cast aluminum release handle Specifications ModelTOONA5024HS-DKITTOONA6024HS-DKIT Max Gate Weight per Leaf (kg) 400 1450 Max Gate Length per Leaf (mm) 5000 6000 Opening Time (90°) 16 seconds 30 seconds Power Supply 230V AC 230V AC Motor Voltage 24V DC 24V DC Power Consumption (W) 120 120 Current Draw (A) 5 5 Force (N) 1800 2200 Duty Cycle (cycles/hour) 95 41 Max Opening Angle 120° 120° Protection Class IP44 IP44 Operating Temperature (°C) -20 to +50 -20 to +50 Motor Dimensions (L x W x H mm) 965 x 115 x 105 1200 x 128 x 150 Motor Weight (kg) 7.5 15 Accessories Complete Kit Contents: 2x NICE TOONA HS 24V DC motors with magnetic encoder 2x NICE ON2E two-button transmitters 1x NICE MC824H Moonclever control panel 1x NICE EPMB pair of photocells with BlueBUS 1x NICE OXI receiver Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.  

NICE RUN HS RUN1200HS | High-Speed Sliding Gate Motor | Up to 1200kg

Product Overview The RUN HS RUN1200HS is engineered for the high-speed operation of sliding gates up to 1200 kg, making it ideal for demanding industrial and residential environments. Product Description This operator includes a 24 Vdc electromechanical gear motor that provides fast, reliable movements and integrates easily with various control systems. The built-in limit switch enhances precision in gate stopping positions. Key Features Heavy-Duty Capacity: Can handle gates weighing up to 1200kg. Gate Speed: Efficient operation with a speed of 22 m/min. High Durability: IP44 rating ensures operation in diverse weather conditions. Security: Mechanically locking motor secures the gate firmly when closed. Intensive Use: Designed for a very intensive duty cycle, suitable for frequent access points. What's in the Box Complete with the RUN1200HS motor, necessary installation hardware, user manual, and integrated control unit. Specifications Motor Voltage 24v Max Weight per Gate 1200kg Gate Speed 22 m/min Protection Rating IP 44 Duty Cycle Very-intensive Mains Power Supply 230v

NICE RUN HS RUN400HS | High-Speed Sliding Gate Motor | Up to 400kg

Product Overview The RUN HS RUN400HS is a top choice for high-speed automation of sliding gates, supporting weights up to 400 kg and suitable for varied environments. Product Description Featuring a 24 Vdc electromechanical gear motor, this sliding gate operator ensures rapid movement and high reliability. Its built-in control unit and electromechanical limit switch streamline installation and use. Key Features Gate Capacity: Supports gates up to 400kg. High Speed: Achieves a gate speed of 42 m/min for efficient access. IP44 Rated: Offers protection against weather elements. Heavy Usage: Suitable for very intensive use due to its high duty cycle. Secure Locking: Features a mechanically locking motor for enhanced security. What's in the Box Includes the RUN400HS motor, installation accessories, user manual, and control unit. Specifications Motor Voltage 24v Max Weight per Gate 400kg Gate Speed 42 m/min Protection Rating IP 44 Duty Cycle Very-intensive Mains Power Supply 230v

NICE Irreversible TO5015 | 230 Vac with Limit Switch on Opening

Product Overview The Nice Toona 5 TO5015 is an irreversible electro-mechanical gear motor equipped with a limit switch on opening. Designed for swing gates up to 5 meters in length and weighing up to 300 kg, this 230 Vac motor offers an opening angle of 110 degrees and cruising speed operation. Product Description The TO5015 irreversible operator ensures durability and reliability with its robust housing made up of two tough aluminium shells finished with a polyester paint coating, providing enhanced resistance to atmospheric agents. The internal moving parts are constructed from high-quality steel, light alloys, and technopolymers, ensuring long-lasting performance and minimal maintenance. Key Features Limit Switch on Opening: Provides precise and reliable operation. Durable Construction: Housing made from tough aluminium shells with polyester paint finish. High-Quality Internal Components: Made from steel, light alloys, and technopolymers. Weather Resistant: Enhanced resistance to atmospheric agents for long-lasting performance. Ideal for Swing Gates: Suitable for gates up to 5m in length and 300kg in weight. What's in the Box 1 x TO5015 Irreversible Operator Installation and mounting hardware Instruction manual Specifications Power Supply: 230 Vac Maximum Gate Length: 5 meters Maximum Gate Weight: 300 kg Opening Angle: 110 degrees Housing Material: Aluminium shells with polyester paint finish Internal Components: Steel, light alloys, and technopolymers

NICE RUN Series Sliding Gate Motor Kits

Product Overview The NICE RUN series sliding gate motor kits provide complete automation solutions for residential and industrial applications, supporting gates from 400kg to 2500kg. These electromechanical gearmotors feature integrated control units with BlueBUS technology, enabling simple two-wire connections for up to 15 control, safety and signalling devices. The series includes high-speed models for rapid operation and standard models for heavy-duty applications. Key Features 230V AC power supply with 24V or 230V motor options BlueBUS technology for simplified two-wire installation Integrated control units with obstacle detection Temperature sensor adapting motor force to climatic conditions Master/slave selection for dual motor synchronization Adjustable acceleration and deceleration settings Self-diagnostics with flashing light indications Mechanically locking motor with aluminum release handle Solar power compatible Battery backup capability Specifications ModelRUN400HS-KITRUN1200HS-KITRUN1500-KITRUN1800-KITRUN2500-KITRUN2500I-KIT Max Gate Weight (kg) 400 1200 1500 1800 2500 2500 Power Supply 230V AC 230V AC 230V AC 230V AC 230V AC 230V AC Motor Voltage 24V DC 24V DC 24V DC 230V AC 230V AC 230V AC Gate Speed (m/min) 42 22 15 10 10 8.2-15.4 Duty Cycle Intensive Intensive Very-intensive Very-intensive Very-intensive Very-intensive Limit Switch Type Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Electromechanical Protection Class IP44 IP44 IP44 IP44 IP44 IP44 Operating Temperature (°C) -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 Special Features High Speed High Speed - - - Inverter Dimensions (L x W x H mm) 400 x 255 x 387 400 x 255 x 387 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 400 x 255 x 390 Accessories Standard Kit Contents: 1x NICE RUN series sliding gate motor with integrated control unit 2x NICE ON2E two-button transmitters 1x NICE EPMB pair of photocells 1x NICE OXI receiver Technical Support For more details or inquiries about this product, contact us today. Our team is ready to assist with your specific requirements.

NICE XME2024 X-METRO/X-FAB | Underground Motor | For Swing Gates up to 2.3m, 250Kg

Product Overview The XME2024 X-METRO/X-FAB underground motor is designed for swing gates with leaves up to 2.3 meters and a maximum weight of 250Kg. This ultra-compact motor is ideal for intensive use, offering reliable and discreet operation for various gate automation needs. Key Features Underground installation for a clean and unobtrusive look. Irreversible electromechanical 24 Vdc gear motor for intensive use. Compact foundation box with a height of only 81 mm. Steel foundation box with cataphoresis paint finish for optimal corrosion resistance. Opening up to 180° as standard. IP67 pressure die cast aluminium motor housing for optimal water resistance. Adjustable mechanical stops on opening and closing. Practical release mechanism operable from both inside and outside. Compatible with Moonclever MC424L control unit and Solemyo systems. Product Description XME2024 X-METRO/X-FAB Underground Motor This listing is for the XME2024 motor only. Please note that the foundation box is sold separately. The XME2024 X-METRO/X-FAB underground motor is an irreversible electromechanical 24 Vdc gear motor, specifically designed for swing gates with leaves up to 2.3 meters and a weight of 250Kg. It features a compact and sturdy foundation box with a height of just 81 mm. The steel box is treated with cataphoresis paint, offering exceptional resistance to corrosion and ensuring long-lasting durability. The motor's design includes a practical and quick installation process, thanks to the exit lever on the gear motor that attaches directly to the gate leaf. The gear motor is suspended inside the housing to enable drainage of any deposits, ensuring optimal water resistance. The load-bearing foundation box comes with adjustable mechanical stops for both opening and closing, allowing the gear motor to be installed later if needed. Key features of the XME2024 include an opening angle of up to 180° as standard, a practical release mechanism operable from both inside and outside, and compatibility with the Moonclever MC424L control unit. The motor also supports operation with Solemyo systems, offering features such as simple programming, memorization of opening and closing limit positions in self-learning mode, deceleration on opening and closing, obstacle detection, and operation during power failures via optional rechargeable batteries (PS124). Technical Specifications SpecificationDetails Motor Type Irreversible electromechanical 24 Vdc gear motor Max Gate Length 2.3 meters per leaf Max Gate Weight 250Kg per leaf Foundation Box Height 81 mm Material Steel with cataphoresis paint finish Protection Standard IP67 Opening Angle Up to 180° Compatible Control Unit Moonclever MC424L Operating Temperature -20°C to +55°C Note: This listing is for the motor only. The foundation box is sold separately.

NICE 230 Vac swing gate operator TO4605

For swing gates up to 3m Electromechanical gear motor, surface mounted High speed with limit switch on opening

NICE 230 Vac swing gate operator T04015 Toona

For swing gates up to 3m Electromechanical gear motor, surface mounted, Low speed with limit switch on opening

NICE 230 Vac swing gate operator TO4006 Toona

For swing gates up to 3m Electromechanical gear motor, surface mounted, irreversible, High speed with limit switch on opening and closing

NICE 230v swing gate operator T04005 Toona

For swing gates up to 3m Electromechanical gear motor, High speed with limit switch on opening Surface Mounted

NICE 24 Vdc Motor for Swing Gates with Leaves up to 3m T04024 Toona

For swing gates up to 3m. Electromechanical gear motor, surface mounted with encoder, irreversible with a mechanical stop on opening