GATEMASTER DGLS Select Pro Digital Gatelock - Fits Up to 60mm Gate Frame

Product Overview The DGLS Select Pro Digital Gatelock offers a keyless entry solution for gates, perfect for increasing security and convenience. This single-sided digital lock features access via code entry and a simple lever/handle action to exit. Designed with marine grade materials, this lock is built to last and withstand harsh conditions. Key Features Single-sided digital access: Enter the code to unlock, exit with a simple lever/handle action. Auto-latching: The latchbolt automatically engages with the gate frame when the gate closes. Marine grade keypad ensures long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Latchbolt moves 22mm (7/8"). Includes a brushed finish stainless steel bolt support plate with brass bearing to reduce friction and wear, enhancing product life. Strike plate included for smooth operation. Hold-back function allows the gate to remain unlocked for short periods. Product Details Product CodeDescription DGLS01R To fit 10-30mm (1/2" - 1-1/4") gate frames - right hand DGLS01L To fit 10-30mm (1/2" - 1-1/4") gate frames - left hand DGLS02R To fit 40-60mm (1-1/2" - 2-1/4") gate frames - right hand DGLS02L To fit 40-60mm (1-1/2" - 2-1/4") gate frames - left hand Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when the gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centers for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centers down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length and/or change to RH/LH, insert a 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.

GATEMASTER DGL Select Pro Digital Gatelock Double Sided - Fits Up to 60mm Gate Frame

Product Overview The DGL Select Pro Digital Gatelock is designed for those seeking keyless entry through gates. This double-sided digital lock allows access via code from both sides, ensuring secure and convenient entry. Made with marine grade keypads, it is built for durability and heavy use. The lock automatically latches into the gate frame when the gate closes, and can only be removed when the gate is open, requiring the code. Key Features Double-sided digital access via code from both sides. Auto-latching mechanism: closes the door and latches the latchbolt into the gate frame. Marine grade keypads ensure long-lasting durability (salt spray tested for 1000 hours). No power needed to operate. Adjustable latchbolt that moves 22mm (7/8"). Brushed finish stainless steel bolt support plate with brass bearing reduces friction, wear, and increases product life. Includes strike plate. Product Details Product CodeDescription DGL01 To fit 10-30mm (1/2" - 1-1/4") gate frames DGL02 To fit 40-60mm (1-1/2" - 2-1/4") gate frames Specifications Marine grade: Salt spray tested for 1000 hours. Latchbolt: Adjustable, moves 22mm (7/8"), auto-latching when gate closes. No power needed. Includes strike plate. Dimensions Installation Instructions Drill 2 x 9mm (3/8") dia. holes at 92mm (3-5/8") centres for M8 fixing bolt. Drill 18mm (3/4") clearance hole for latchbolt at 22mm (7/8") centres down from the top 9mm (3/8") hole. Fix lock in place using stainless steel clamp plate, bolt support plate, and 2 stainless steel countersunk fixing bolts supplied. Drill clearance hole in the gate post to receive the latchbolt. Slot this hole vertically to allow for gate sag. Fix the strike plate and bend back so the latchbolt slides smoothly. Ensure the latchbolt moves freely without binding on the gate or frame. To adjust latchbolt length or change to RH/LH, insert 3mm (1/8") long arm hex key (supplied) into the end of the bolt and release the locking screw. Rotate the bolt as required and re-tighten the locking screw. Lubricate with light oil periodically. Maintenance Every 3 months: Remove keypads from the lock. Spray the inside of the lock thoroughly with WD40 or equivalent through the tumbler holes at the back of the lock. Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to ensure the lock is working smoothly.