Control Board for BENINCA BILL Motors

CAME ZLX230P 230v Multifunction control panel

801QA-0110 - ZLX230P Basic version multifunction control panel, with 230 V AC power supply, for 230 V double-leaf swing gates, with programming and signaling display, self-diagnosis of safety devices, Digital Torque Control, 2 safety inputs and storage for up to 250 users . Technical data Power supply (V – 50/60 Hz) 220 AC ÷ 240 AC Power supply to motor (V) 220 AC ÷ 240 AC Power (W) 1100 Stand-by consumption (W) 0,8 Operating temperature (°C) -20 ÷ +55 Protection rating (IP) 54

CAME ZL39B board 24 v Control Panel PCB Only

ZL39B board 24 v Control Panel    (Stripped back version for use with older barriers) This item replaces the CAME ZL38. Terminal Block and Transformer are required CAME ZL39B  Control Panel for CAME GARD barriers.   Whats Included: 1 ZL39B 88003-0124      

CAME ZLX24SA Conversion Kit for ZLJ24 And ZL19

Product Overview CAME ZLX24SA Conversion Kit 88006-0085  

CAME ZLX ENCLOSURE

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

CAME ZLX24SA | Control Panel | CNX BUS, Adaptive Speed, 1000 Users

Product Overview The CAME ZLX24SA Control Panel  is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel  is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

GIBIDI BA24 Control Panel | AS06300 | For GROUND624, ART5024, AUTOBOX3024

Product Overview BA24 - Control Panel (AS06300) is a versatile control unit compatible with GROUND624, ART5024, and AUTOBOX3024. Key Features Supports 1 or 2 engines on 24 Vdc (max. 150W) Compatible with GROUND, ART, and AUTOBOX swing gates Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc (max. 150W) Power supply 220-230 Vac Swing gates GROUND, ART Sliding gates YES Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA100 Control Panel | AS05060 | For Various Gate and Door Operators

Product Overview BA100 - Control Panel (AS05060) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, GROUND610, BL233, ART5000, MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 engine on 230 Vac (max. 700W), 2 engines in parallel only Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 on 230 Vac (max. 700W), 2 engines in parallel only Power supply 220-230 VAC Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian NO Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (2) Type of programming Analog Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BA230 Control Panel | AS05581 | For Various Gate and Door Operators

Product Overview BA230 - Control Panel (AS05581) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, TOUCHE126, TOUCHE276, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Limit switches (4) Type of programming Digital Electric-lock YES Embedded radio receiver NO Protection degree IP 55

GIBIDI BE24 Control Panel | AS06250 | For KUDA, AGO424E, AGO624E, SNAPPER, SERRA320

Product Overview BE24 - Control Panel (AS06250) is a versatile control unit with an embedded radio receiver compatible with KUDA, AGO424E, AGO624E, SNAPPER, and SERRA320 swing gates. Key Features Supports 1 or 2 engines on 24 Vdc Compatible with KUDA, AGO, SNAPPER, and SERRA swing gates Force adjustment and slowdown features Safety device and photocell input Encoder or time logic limit switches Electric lock compatibility Embedded radio receiver IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 24 Vdc Power supply 220-230 Vac Swing gates KUDA, AGO, SERRA, SNAPPER Sliding gates NO Overhead or sectional doors NO Barriers NO Bollards NO Rolling shutters NO Curtains and shutters NO Pedestrian YES Force adjustment YES Slowdown YES Anti-crushing NO Safety device input YES Photocell input YES Limit switches-encoder Encoder or time logic Type of programming Analog with leaf-learning Electric-lock YES Embedded radio receiver YES Protection degree IP 55

GIBIDI F4 Control Panel | AS06320 | For Various Gate and Door Operators

Product Overview F4 - Control Panel (AS06320) is a versatile control unit compatible with various gate and door operators, including TOP291, TOP391, TOP441, FLOOR850, FLOOR880, BL233, ART5000, PASS600, PASS800, PASS1200, PASS1800 (also double sliding gate), MODO500, AUTOBOX3000, MPS 120, MPS 120E, MPS 160, MPS 160E, MPS 240, MPS 240E. Key Features Supports 1 or 2 engines on 230 Vac (max. 700W) Compatible with various gate and door types Force adjustment and slowdown features Safety device and photocell input Limit switches for accurate control Electric lock compatibility IP55 protection degree Product Description TECHNICAL SPECIFICATIONS FeatureSpecification Engines 1 or 2 on 230 Vac (max. 700W) Power supply 220-230 Vac Swing gates TOP, FLOOR, ART, GROUND Sliding gates MINNOW, PASS Overhead or sectional doors AUTOBOX Barriers YES Bollards YES Rolling shutters MPS Curtains and shutters RUNNER Pedestrian YES

CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

Product Overview The CAME ZA5 is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement is ideal for those looking to replace a damaged or malfunctioning ZA5 control panel. With a power supply of 230V and a protection rating of IP54, the ZA5 control panel ensures reliable and efficient operation of your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA5 control panel. Compatible with one or two CAME 230V operators. 230V power supply for robust performance. IP54 protection rating for durability and resistance to environmental factors. Product Description CAME ZA5 | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA5 control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA5 control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA5 control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. Whether you are replacing a damaged control panel or upgrading your gate automation system, the CAME ZA5 control panel (PCB only) is a dependable choice. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators Note: Images may differ from the actual product. The CAME ZA5 control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates

LIMITED STOCK AVAILABLE   Product Overview The CAME ZA3P is a multifunction control panel designed specifically for two-leaf swing gates. This PCB-only replacement features limit-switch control and slow-down speed adjustment, ensuring smooth and precise gate operation. With a power supply of 230V and a protection rating of IP54, the ZA3P control panel provides reliable and efficient performance for your gate automation system. Key Features Multifunction control panel for two-leaf swing gates. PCB-only replacement for the CAME ZA3P control panel. 230V power supply for robust performance. Limit-switch control for precise gate operation. Slow-down speed adjustment for smooth movements. IP54 protection rating for durability and resistance to environmental factors. Compatible with one or two CAME 230V operators. Product Description CAME ZA3P | Multifunction Control Panel (PCB Only) for Two-Leaf Swing Gates The CAME ZA3P control panel (PCB only) is a versatile and reliable solution for automating two-leaf swing gates. Designed to replace your existing ZA3P control panel, this PCB-only unit provides all the functionality needed to ensure smooth and efficient gate operation. With a 230V power supply and IP54 protection rating, the ZA3P control panel is built to withstand various environmental conditions while delivering consistent performance. This control panel is compatible with one or two CAME 230V operators, making it a flexible option for different gate automation setups. The limit-switch control and slow-down speed adjustment features ensure precise and smooth gate movements, enhancing the overall performance and safety of your gate system. Technical Specifications SpecificationDetails Power Supply 230V Motor Voltage 230V Protection Rating IP54 Compatibility For use with one or two CAME 230V operators The CAME ZA3P control panel (PCB only) is a reliable and efficient replacement for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

CAME ZL65 | Control Panel for Two-Leaf Swing Gates | LCD Display, IP54

Product Overview The CAME ZL65 Control Panel is a multifunctional solution designed for two-leaf swing gates. This advanced control panel features an LCD display for easy function programming, signaling, and self-diagnosis of safety devices. The ZL65 has been completely overhauled to ensure higher quality and easier settings. With its memory roll feature, you can save and copy settings to other operators, streamlining the setup process. The control panel includes color-coded terminals for straightforward wiring and installation. Key Features Designed for two-leaf swing gates LCD display for function programming, signaling, and self-diagnosis Memory roll for saving and copying settings to other operators Color-coded terminals for easy wiring and installation Compatible with a range of CAME transmitters Includes dedicated Green Power module and CONNECT GW gateway Allows connection to GSM, WiFi, or LAN networks for remote management via CAME CONNECT Protection rating of IP54 Product Description Specifications Motor Voltage: 24v Protection Rating: IP54 The CAME ZL65 Control Panel is designed to offer comprehensive control and management for two-leaf swing gates. The multifunctional control panel is equipped with an LCD display that facilitates easy programming of functions, signaling, and performing self-diagnosis on safety devices. This control panel has been overhauled to improve quality and simplify the settings process. One of the standout features of the ZL65 is the memory roll, which allows users to save and copy settings to other operators, making it an efficient tool for managing multiple gates. The color-coded terminals further enhance the ease of installation, ensuring a hassle-free setup process. The ZL65 control panel is compatible with a variety of CAME transmitters and includes the dedicated Green Power module and CONNECT GW gateway. This gateway module kit enables the operator to connect to GSM, WiFi, or LAN networks, allowing for remote management through CAME CONNECT. This feature is particularly useful for operators who need to manage gate settings and operations remotely. The control panel is housed in an enclosure with an IP54 protection rating, ensuring durability and resistance to environmental factors such as dust and water. This makes the CAME ZL65 a reliable and robust solution for controlling two-leaf swing gates in various settings. NOTE: Images may differ from the actual product.

CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL60 is a versatile control panel designed for one or two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features functions set by dip-switches and adjusted by trimmers, ensuring precise and customizable control. It is set up for connecting the RGP1 module to reduce energy consumption and the RLB card for emergency operation and battery recharging. All connections and links are rapid-fuse protected for added safety and reliability. Key Features Control panel for one or two-leaf swing gates. Includes enclosure and lid for complete protection. Functions set by dip-switches and adjusted by trimmers. Compatible with RGP1 module for reducing energy consumption. Supports RLB card for emergency operation and battery recharging. Rapid-fuse protected connections and links. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with AXL and FTL motor ranges. Product Description CAME ZL60 | Control Panel for Swing Gates | Includes Enclosure and Lid The CAME ZL60 control panel is designed to provide reliable and efficient automation for one or two-leaf swing gates. With functions set by dip-switches and adjusted by trimmers, this control panel allows for precise customization to meet your specific needs. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is set up for connecting the RGP1 module, which helps reduce energy consumption, and the RLB card, which provides emergency operation and battery recharging capabilities. The rapid-fuse protected connections and links add an extra layer of safety, ensuring reliable operation. Compatible with the AXL and FTL motor ranges, the CAME ZL60 control panel is a versatile and dependable choice for your gate automation system. Technical Specifications SpecificationDetails Motor Voltage 24V Protection Rating IP54 Motor Range AXL, FTL The CAME ZL60 control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for one or two-leaf swing gates.

CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid

Product Overview The CAME ZL92Z is a multifunction control panel designed for two-leaf swing gates. It includes an enclosure and lid, providing a complete and protected solution for your gate automation system. The control panel features an LCD display for function programming, signalling, and self-diagnosis of safety devices, ensuring precise and user-friendly control. With a power supply of 24V and a protection rating of IP54, the ZL92Z control panel ensures reliable and efficient operation of your gate system. Key Features Multifunction control panel for two-leaf swing gates. Includes enclosure and lid for complete protection. LCD display for function programming, signalling, and self-diagnosis of safety devices. 24V motor voltage for robust performance. IP54 protection rating for durability and resistance to environmental factors. Compatible with Amico and Stylo motor ranges. Product Description CAME ZL92Z | Control Panel for Two-Leaf Swing Gates | Includes Enclosure and Lid The CAME ZL92Z control panel is designed to provide reliable and efficient automation for two-leaf swing gates. With an LCD display for function programming, signalling, and self-diagnosis of safety devices, this control panel allows for precise customization and user-friendly control. The included enclosure and lid ensure that the control panel is well-protected from environmental factors, enhancing its durability and lifespan. This control panel is compatible with the Amico and Stylo motor ranges, making it a versatile and dependable choice for your gate automation system. With a 24V motor voltage and an IP54 protection rating, the CAME ZL92Z control panel is built to withstand various environmental conditions while delivering consistent performance. Technical Specifications SpecificationDetails Power Supply 24V Motor Voltage 24V Protection Rating IP54 Compatibility For use with one or two CAME 24V operators with self-diagnosis Motor Range Amico, Stylo The CAME ZL92Z control panel is a reliable and efficient solution for your gate automation needs, ensuring seamless and robust operation for two-leaf swing gates.

GENIUS AUTOMATION JA592 - Genius Brain 592 Swing Gate Panel c/w lock and limits - 230v

JA592 - Genius AUTOMATION Brain 592 Swing Gate Panel c/w lock and limits - 230v Brain 592 Brain 592 is a 230v control board for swing gates. Suitable for one or two motors - Simple or complete work times learning with or without slow-downs

CAME ZLX24SA | Control Panel (PCB only) | CNX BUS, Adaptive Speed, 1000 Users

Product Overview The CAME ZLX24SA Control Panel (PCB only) is an advanced control solution designed for use with one or two CAME 24V operators with self-diagnosis. This control panel features CNX BUS inputs, four settable safety inputs, and a B1-B2 output, making it highly versatile and adaptable. It incorporates the latest RIO System 2.0 technology, CAME KEY and gateways slot, and Adaptive Speed and Torque Technology along with Virtual Encoder management. With a clock module and support for up to 1000 users, the ZLX24SA is a robust and reliable choice for modern gate automation systems. Key Features CNX BUS inputs Four settable safety inputs B1-B2 output RIO System 2.0 technology CAME KEY and gateways slot Adaptive Speed and Torque Technology Virtual Encoder management Clock module Supports up to 1000 users IP54 protection rating Product Description The CAME ZLX24SA Control Panel (PCB only) is engineered for exceptional performance and reliability in gate automation systems. Featuring advanced CNX BUS inputs, this control panel offers enhanced connectivity and flexibility. The four settable safety inputs ensure maximum safety and customization, while the B1-B2 output provides additional control options. The integration of RIO System 2.0 technology allows for seamless operation and enhanced communication between devices. The control panel also includes a CAME KEY and gateways slot, providing easy access and integration with various gateway systems. The Adaptive Speed and Torque Technology and Virtual Encoder management ensure smooth and efficient operation, adapting to varying conditions and requirements. Equipped with a clock module, the ZLX24SA supports scheduled operations and time-based management, catering to diverse user needs. With a capacity to support up to 1000 users, it is ideal for large-scale installations and applications. The IP54 protection rating ensures durability and protection against dust and water ingress, making it suitable for a wide range of environments. Specifications Power Supply: 24V Motor Voltage: 24V Protection Rating: IP54 Compatibility: For use with one or two CAME 24V operators with self-diagnosis Motor Range: ATS

CAME ZL392 Ver.B | Control Panel for GARD GT Barriers | LCD Display, Multi-Frequency Remotes

Product Overview The CAME ZL392 Ver.B is a sophisticated control panel designed for use with GARD GT barriers. Featuring an LCD display, this control panel offers a user-friendly interface for programming and managing your barrier system. It supports multi-frequency remotes, 8K2 safety inputs, CXN bus inputs, and memory function, making it a versatile and reliable choice for your barrier automation needs. Key Features Compatible with GARD GT barriers. LCD display for easy programming and operation. Supports Came Key for enhanced security. 8K2 safety inputs for reliable safety measures. CXN bus inputs for seamless integration. Two RSE slots and an R700/R800 slot for expandability. Multi-frequency support for remotes. Antenna port for extended remote range. Memory function for storing settings and configurations. Product Description CAME ZL392 Ver.B | Control Panel for GARD GT Barriers | LCD Display, Multi-Frequency Remotes The CAME ZL392 Ver.B control panel is an advanced solution for managing GARD GT barriers. The LCD display provides a clear and intuitive interface for programming and monitoring the barrier system. This control panel supports Came Key, ensuring secure access and operation. Equipped with 8K2 safety inputs, the ZL392 Ver.B offers reliable safety features to protect users and vehicles. The CXN bus inputs allow for seamless integration with other system components, while the two RSE slots and an R700/R800 slot provide expandability options for future upgrades. The multi-frequency remote support and antenna port extend the range and flexibility of remote control operations. Product Includes QuantityItem 1 ZL392 Control Panel Technical Specifications SpecificationDetails Compatibility GARD GT Barriers Display LCD Security Supports Came Key Safety Inputs 8K2 Bus Inputs CXN Expansion Slots 2 RSE, 1 R700/R800 Remote Support Multi-Frequency Antenna Port Yes Memory Function Yes The CAME ZL392 Ver.B control panel is an essential component for ensuring the smooth and efficient operation of GARD GT barriers. Its advanced features and robust design make it a reliable choice for managing your barrier system.

CAME ZL39B board 24 v Control Panel Inc. Terminal Block & Transformer

ZL39B board 24 v Control Panel   Inc. Terminal Block & Transformer (Stripped back version for use with older barriers) This item replaces the CAME ZL38. Terminal Block and Transformer are required CAME ZL39B  Control Panel for CAME GARD barriers.   Whats Included: 1 ZL39B 88003-0124 1 Terminal Block Kit with Fuse Caps 88006-0072 1 Transformer 119RIR394

V2 Gate Automation V2 Kit Universal1 230Vac digital control unit kit

Kit Universal1, 230V - As the name implies, this kit can be used with any type of sliding or swing or garage door motor according to the requirements The kit contains:  - 1 x CITY1 EVO digital control unit - 2 x PHOX4 transmitters  - 1 x Pair of SENSIVA photocells  - 1 x MR2 Receiver

V2 Gate Automation V2 Flexy2 230Vac | Analog Control Unit for Swing & Sliding Gates | Built-in Receiver & Advanced Safety

Product Overview The V2 Flexy2 230Vac is an analog control unit designed for managing both swing gates (single and double leaf) and sliding gates. This unit features adjustment and programming via trimmer and dip-switch, making it a reliable and straightforward solution for gate automation. It supports a 230V power supply for two single-phase motors and includes a built-in receiver, adding convenience and efficiency to its operation. Key Features Analog control unit for swing and sliding gates 230V power supply for 2 single-phase motors Adjustment and programming by trimmer and dip-switch Built-in receiver (433.92 MHz) Stores up to 240 Personal Pass transmitters RJ45 connector for PROG2 programmer connection Start, pedestrian start, and stop controls from the transmitter Open/close limit switch inputs 230V flashing light output with intermittency Courtesy light output controllable by transmitter Safety device test before any opening Leaf slow-down function in limit switch area Monitoring of input status shown by LEDs Product Description The V2 Flexy2 230Vac analog control unit is a robust solution for the automation of swing and sliding gates. This unit is powered by a 230V supply and can control two single-phase motors, making it suitable for various gate configurations. Its adjustment and programming are easily managed through trimmer and dip-switch settings, offering simplicity and reliability. The built-in receiver operating at 433.92 MHz enhances convenience, allowing for seamless integration with up to 240 Personal Pass transmitters. This feature ensures that multiple users can operate the gate efficiently. The RJ45 connector facilitates connection to the PROG2 programmer via a standard network cable (UTP), providing additional programming capabilities. Control options include start, pedestrian start, and stop commands from the transmitter, offering flexibility in gate operation. The unit supports open/close limit switch inputs, ensuring precise control of gate movements. A 230V flashing light output, designed for use with intermittent flashing lights, provides clear visual indicators during gate operation. For enhanced safety, the Flexy2 performs a safety device test before any gate movement, ensuring all components are functioning correctly. The leaf slow-down function in the limit switch area reduces noise and mechanical stress, ensuring smooth and quiet gate closures. The courtesy light output can be controlled by the transmitter, adding convenience and enhancing security. Monitoring of input status is facilitated by LEDs, providing clear and immediate feedback on the system's operational state. Overall, the V2 Flexy2 230Vac analog control unit combines straightforward programming, robust performance, and advanced safety features, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY2+ 24Vdc | Digital Control Unit for Swing & Sliding Gates | Advanced Programming & Safety Features

Product Overview The V2 CITY2+ 24Vdc is a digital control unit designed for managing both swing gates (single and double leaf) and sliding gates equipped with 24Vdc motors. This unit features advanced programming capabilities, safety measures, and energy-efficient functions, ensuring reliable and efficient operation of your gate systems. It is suitable for both residential and commercial applications, providing comprehensive control and monitoring functionalities. Key Features Digital control unit for swing and sliding gates with 24Vdc motors Programming achieved using 3 program buttons and display Plug-in adapter for modular radio receiver Start, pedestrian start, and stop transmitter controls Auxiliary channel management from the transmitter Emergency pack battery input Encoder input Low voltage output for warning light or 24V flashing light Safety device test before any opening Amperometric sensor obstacle detection function with programmable threshold Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Monitoring of input status using the display ADI connector for connecting optional modules Product Description The V2 CITY2+ 24Vdc digital control unit is engineered for efficient and secure management of swing and sliding gates powered by 24Vdc motors. The unit facilitates easy programming with three buttons and a display interface, ensuring user-friendly operation and configuration. This control unit supports a plug-in adapter for a modular radio receiver, enabling wireless control with start, pedestrian start, and stop functions from the transmitter. Additionally, it includes auxiliary channel management, expanding its versatility in different applications. For enhanced safety, the CITY2+ features an emergency pack battery input and an encoder input, providing reliable performance even during power outages. The low voltage output is designed for a warning light or a 24V flashing light, offering clear visual indicators of gate activity. The unit conducts a safety device test before any gate movement, ensuring all components are functioning correctly. Its amperometric sensor obstacle detection function, with a programmable threshold, enhances safety by preventing collisions. Maintenance is made simple with an operational cycle counter and programmable reminders, helping to keep the system in optimal condition. The leaf slow-down function in the limit switch area reduces noise and mechanical stress during gate closure, ensuring smooth and quiet operation. Monitoring and diagnostics are streamlined through the display that shows input status, while the ADI connector allows for the connection of optional modules, enhancing the unit's functionality and adaptability. Overall, the V2 CITY2+ 24Vdc digital control unit combines advanced technology, robust safety features, and user-friendly programming, making it an excellent choice for modern gate automation systems.

V2 Gate Automation V2 CITY1 EVO 230V | Digital Control Unit for Swing & Sliding Gates | Advanced Safety & Energy Efficiency

Product Overview The V2 CITY1 EVO 230V is a digital control unit designed to manage both swing gates (single and double leaf) and sliding gates. With its advanced programming capabilities, safety features, and energy-saving functions, this unit ensures reliable and efficient gate operation. It supports a 230V power supply for two single-phase motors equipped with ENCODER technology, making it an ideal choice for both residential and commercial gate automation needs. Key Features Digital control unit for swing and sliding gates 230V power supply for 2 single-phase motors with ENCODER Plug-in adapter for modular radio receiver MR2 Start, pedestrian start, and stop controls from the transmitter Safety device test before any opening 230V flashing light output with intermittency Self-learning operating time function Obstacle detection function Operational cycle counter with programmable maintenance reminders Leaf slow-down function in limit switch area Slow start function during opening Monitoring of input status using the display ADI 2.0 connector for advanced ADI device management USB connector for PC connectivity, firmware updates, and diagnostics LOW ENERGY module connector for electrical energy savings Product Description The V2 CITY1 EVO 230V digital control unit is a high-performance solution for managing swing and sliding gates. Designed to handle single and double leaf swing gates as well as sliding gates, this unit offers versatile and robust control capabilities. It is powered by a 230V supply and supports two single-phase motors equipped with ENCODER technology for precise and smooth operation. Programming the CITY1 EVO is straightforward, using three program buttons and a clear display interface. This user-friendly approach ensures easy setup and adjustment to meet specific operational requirements. Key safety features include a test of the safety devices before any gate movement, and an obstacle detection function that prevents collisions. The unit also features a self-learning operating time function, which optimizes performance by adapting to the gate's characteristics. The control unit is compatible with a modular radio receiver MR2, allowing for wireless control with start, pedestrian start, and stop functions accessible from the transmitter. A 230V flashing light output, intended for use with intermittent flashing lights, provides clear visual indicators during gate operation. Maintenance is simplified with an operational cycle counter and programmable reminders, ensuring the system remains in optimal condition. The unit's leaf slow-down function in the limit switch area reduces noise and mechanical stress, while the slow start function during opening further enhances smooth operation. Monitoring and diagnostics are facilitated through a display that shows input status, and the ADI 2.0 connector allows for advanced management of ADI devices. Additionally, a USB connector enables connection to a PC for detailed programming, firmware updates, and operation diagnostics. For energy efficiency, the LOW ENERGY module connector helps reduce power consumption by deactivating non-essential components when the gate is not in motion. This feature contributes to lower energy costs and enhanced sustainability. Overall, the V2 CITY1 EVO 230V digital control unit combines advanced technology, comprehensive safety features, and energy-saving functionalities, making it a top choice for modern gate automation systems.

BFT RIGEL 6 Automatic Electric Gate Control Panel | For Hydraulic & Electric Swing Gates

Product Overview The RIGEL 6 Automatic Electric Gate Control Panel is a state-of-the-art 230V control panel designed to power both hydraulic and electric swing gate operators. This versatile control panel is suitable for managing single or double closing gate leaves, making it an ideal choice for both commercial and domestic applications. It is compatible with BFT’s U-Link communications platform, allowing for seamless integration and control of all your wireless features. Renowned for its security, reliability, and cutting-edge technology, the RIGEL 6 is our most popular automatic electric gate control panel. Key Features Compatible with hydraulic and electric swing gate operators Supports single and double gate leaves 230V power supply Integrates with BFT’s U-Link communications platform Electronic torque limiter Four-channel receiver with customizable settings Programming and diagnostics with display Latching capability Integrated obstacle detection with adjustable sensitivity Rolling code transmitter cloning Secure electronic locking Robust protective outer casing Approach speed slowdown Separate inputs for safety devices Thermostat-fitted motors to prevent overheating 7-day timer 2-year warranty Product Description The RIGEL 6 Automatic Electric Gate Control Panel offers advanced control and security features for managing hydraulic and electric swing gates. Its intelligent programming capabilities include an electronic torque limiter and a customizable four-channel receiver, ensuring optimal performance and flexibility. The integrated obstacle detection system and rolling code transmitter cloning enhance security, while the robust outer casing protects the unit from environmental factors. Intelligent Programming Features Electronic Torque Limiter: Adjusts the force applied by the gate operators to prevent damage and ensure safety. Four Channel Receiver: Customizable channels for versatile control over various functions. Programming and Diagnostics with Display: Easy setup and monitoring of the control panel’s functions. Security Features Latching Capability: Ensures gates remain securely closed. Integrated Obstacle Detection: Automatically stops gate movement if an obstacle is detected, with adjustable sensitivity. Rolling Code Transmitter Cloning: Provides secure and easy addition of new transmitters. Secure Electronic Locking: Prevents unauthorized access and enhances security. Robust Protective Outer Casing: Protects the control panel from environmental damage. Safety Features Obstacle Detection: Sensitivity can be adjusted to ensure safety and prevent accidents. Approach Speed Slowdown: Reduces the gate speed as it approaches the closed position to prevent damage. Separate Inputs for Safety Devices: Allows for the integration of additional safety devices. Thermostat-Fitted Motors: Prevents overheating by monitoring motor temperature. 7-Day Timer: Enables scheduling of gate operations for added convenience and security. Specifications Type: Electric Gate Control Panel for Hydraulic & Electric Swing Gate Operators Power Supply: 230V Compatibility: Single and Double Swing Gates Integrated Systems: BFT U-Link communications platform Warranty: 2 years Package Contents RIGEL 6 Automatic Electric Gate Control Panel All necessary fittings and parts Installation instructions Applications The RIGEL 6 Automatic Electric Gate Control Panel is ideal for both commercial and residential use. Its advanced features and robust design make it suitable for managing hydraulic and electric swing gates, ensuring secure, reliable, and efficient gate operation.

Nice Moonclever MC424L Control Panel | For Swing Gates | Compatible with Solemyo Solar Kit

Product Overview The Nice Moonclever MC424L control panel is specifically tailored for 24 Vdc Nice gear motors, providing advanced control features and compatibility with the Solemyo solar power kit. Product Description This control unit is engineered for use with specific Nice gate motors without encoders, such as the Wingo4024, Wingo5024, and X-Metro2020. It integrates seamlessly into existing setups, offering reliable performance and enhanced safety features. Key Features Compatible with 24 Vdc Nice gear motors: Wingo4024, Wingo5024, X-Metro2020. Supports the Solemyo solar power kit for energy-efficient operation. Intelligent obstacle detection ensures safety throughout gate travel. Advanced diagnostics with visual indicators via flashing lights and LEDs. Provision for connecting latest generation resistive sensitive edges for added security. What's in the Box Moonclever MC424L control unit, user manual, warranty information. Specifications Power Supply 24Vdc Compatible Motors Wingo4024, Wingo5024, X-Metro2020 Safety Features Obstacle detection, Sensitive edge connection Additional Features Solar power compatibility, Diagnostic LEDs

Moonclever MC824H Control Panel | For Nice 24Vdc Swing Gate Motors | Advanced Features with Opera System

Product Overview The Moonclever MC824H control panel is designed for optimal control of Nice 24 Vdc swing gate motors. It integrates seamlessly with the Solemyo solar power system and the Opera management system, offering advanced features and remote diagnostics capabilities. Product Description This state-of-the-art control unit supports the latest technological innovations, including Nice BlueBUS technology, allowing easy connection of multiple devices. Its design is geared towards enhancing user interaction and gate management, providing a user-friendly interface with extensive customization options. Key Features Compatibility with Nice 24 Vdc gear motors and Solemyo solar power system. Supports Opera system for advanced management and programming. Equipped with BlueBUS technology for connecting up to 12 devices with two cables. Advanced obstacle detection with dual technology for increased safety. Microprocessor logic with self-learning of travel limits and pedestrian mode. Deceleration on opening and closing to ensure smooth, quiet operation. What's in the Box Moonclever MC824H control unit, installation manual, warranty card. Specifications Power Supply 24Vdc Technology Nice BlueBUS, Magnetic Encoder Safety Features Obstacle Detection, Anti-crushing Clutch Compatibility Nice Solemyo, Opera System Control Unit Dimensions Specified in the manual

TOUSEK AUTOMATION ST 51 Control Board | Large LCD Display | For 230V Swing Gates

Product Overview The ST 51 Control Board is designed for 230V swing gates, offering advanced features and easy operation. It includes a large illuminated LCD display and a clear text menu programmable through four buttons, providing a user-friendly interface for efficient gate control. Product Description The ST 51 Control Board is an advanced control unit suitable for 230V swing gates. It features a large illuminated LCD display that offers clear text menus, making programming straightforward and intuitive through its four-button interface. The control board includes a connection slot for a receiver, ensuring compatibility with various remote systems. It also supports self-monitoring of the photocell, adjustable partial opening, and a soft stop feature to ensure smooth gate operation. The pedestrian feature allows for partial opening, enhancing convenience and functionality. Key Features Large Illuminated LCD Display: Provides clear text menus for easy programming. Four-Button Interface: Simple navigation and configuration through intuitive controls. Receiver Connection Slot: Ensures compatibility with remote systems. Self-Monitoring Photocell: Enhances safety and reliability. Adjustable Partial Opening: Allows for customized gate opening settings. Soft Stop Feature: Ensures smooth and gentle gate movement. Pedestrian Feature: Enables partial opening for pedestrian access. Suitable for 230V Swing Gates: Designed specifically for 230V gate systems. What's in the Box 1 x ST 51 Control Board 1 x User Manual Necessary mounting hardware Specifications Display: Large illuminated LCD Interface: Four-button programmable menu Power Supply: 230V Receiver Connection Slot: Yes Photocell Monitoring: Self-monitoring Partial Opening: Adjustable Soft Stop: Yes Pedestrian Feature: Yes

CAME Card for emergency functioning LB22

Card for emergency functioning during blackouts and battery recharging,  N.2 12 v - 1.2 Ah batteries (not supplied)

CAME Card for extension LM22

Card for motor extension

CAME Control panel for one barrier 801QA-0030

Possibility of controlling up to 4 barriers with n.3 LM22 cards

Fadini F/7047L Elpro 27 | Single Phase Control Panel | Swing/Sliding Gates

Product Overview The Fadini Elpro 27 single phase control panel is designed to efficiently control single or double swinging gates as well as single or bi-parting sliding gates. This versatile electronic controller is equipped with motor capacitors and can handle motor operators with or without limit switches, making it suitable for a wide range of gate automation applications. Key Features Single phase PCB power supply: 230 V ±10% 50/60 Hz Max. power of motors: 750 W Courtesy light output: 230 V - 100 W max Photocells/Keyswitch/Radio receiver output: 24 V AC Pilot light output: 24 V - 3W max DSA control output: 24 V AC Flasher output: 230 V - 25 W max Motor run time: 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time: 1 - 220 S Closing gate delay time: 0-10 S Pedestrian opening time: 1 - 45 S Box dimensions: 210 x 295 x 110 mm Protection standards: IP64 Working temperature: -20°C to +55°C Product Description Fadini F/7047L Elpro 27 Single Phase Control Panel The Fadini Elpro 27 control panel is an advanced electronic controller designed for the automation of single or double swinging gates and single or bi-parting sliding gates. This controller is equipped with motor capacitors and supports motor operators with or without limit switches. The Elpro 27 is ideal for various gate automation applications, offering a single phase PCB power supply of 230 V ±10% 50/60 Hz, and a maximum motor power capacity of 750 W. Key outputs of the Elpro 27 include courtesy light output at 230 V - 100 W max, photocells/keyswitch/radio receiver output at 24 V AC, pilot light output at 24 V - 3W max, DSA control output at 24 V AC, and flasher output at 230 V - 25 W max. The control panel provides adjustable motor run time settings (0 - 120 S for sliding gates and 0 - 60 S for swing gates), dwell time (1 - 220 S), closing gate delay time (0-10 S), and pedestrian opening time (1 - 45 S). Encased in a durable box with dimensions of 210 x 295 x 110 mm, the Elpro 27 meets IP64 protection standards and operates efficiently in a working temperature range of -20°C to +55°C. This control panel ensures reliable and safe operation for various gate automation needs. Technical Specifications SpecificationDetails Single phase PCB power supply 230 V ±10% 50/60 Hz Max. power of motors 750 W Courtesy light output 230 V - 100 W max Photocells/Keyswitch/Radio receiver output 24 V AC Pilot light output 24 V - 3W max DSA control output 24 V AC Flasher output 230 V - 25 W max Motor run time 0 - 120 S (Sliding), 0 - 60 S (Swing) Dwell time 1 - 220 S Closing gate delay time 0-10 S Pedestrian opening time 1 - 45 S Box dimensions 210 x 295 x 110 mm Protection standards IP64 Working temperature -20°C to +55°C

FAAC 455D Control Board | Swing Gate Control Board for 230V Motors

Product Overview The FAAC 455D is a versatile control board designed for swing gate operators with 230V motors. It offers reliable performance for both single leaf and bi-parting gates, making it suitable for various residential and commercial applications. With features like automatic opening and closing, slow down, and soft stop, the 455D provides a smooth and convenient gate operation experience. Key Features Swing gate control board for 230V motors Operates single leaf or bi-parting gates Automatic signal to open, gate closes after selected timed pause Provides opening and closing "slow down, soft stop" convenience Compatible with FAAC models: 412, 415, 400, 402, 422, 750, 760, 615 2-year guarantee for peace of mind Technical Specifications Power Supply: 115V Protection Fuses: 800mA (accessories), 5A (motors) Absorbed Power: 10W Motor Max Load: 800W Accessories Max Load: 0.5A Electric Lock Max Load: 15VA Operating Temperature: -78°F to +131°F Product Description The FAAC 455D Control Board is engineered to provide robust and reliable control for swing gates equipped with 230V motors. It supports both single leaf and bi-parting gate configurations, making it a flexible choice for various gate automation needs. The control board includes automatic signal functionality to open the gate and close it automatically after a pre-selected pause, enhancing convenience and security. The 455D control board also features "slow down, soft stop" capabilities, ensuring a smooth and gentle gate operation. This feature is particularly useful for preventing wear and tear on the gate and the motor, extending the lifespan of the entire system. Designed to be compatible with multiple FAAC gate operator models, including the 412, 415, 400, 402, 422, 750, 760, and 615, the FAAC 455D offers a versatile solution for upgrading or replacing existing control boards. With a maximum motor load of 800W and an accessories load of 0.5A, it is built to handle demanding applications efficiently. The control board operates reliably across a wide temperature range, from -78°F to +131°F, ensuring consistent performance in various environmental conditions. What's in the Box: 1 x FAAC 455D Control Board Installation manual and hardware FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

FAAC E124 | Swing Gate Control Board for 24V Operators

Product Overview The FAAC E124 is a high-performance control board designed for swing gate operators with 24V motors. Known for its advanced programmability and flexibility, the E124 is compatible with all FAAC 24V swing gate systems and many other brands. It features extensive programming options, safety functions, and modern connectivity capabilities. Key Features Swing gate control board for 24V operators Additional programming features accessible via a device with a USB port Compatible with all FAAC 24V swing gate systems and other brands 10 standard logics customizable for unlimited programming 50 different power levels and 10 independent speeds for optimal performance Management of limit switches and encoders for safety and compliance Ultra sense function for obstacle detection with hydraulic operators Hold closed function to pulse leaves closed every 1 to 48 hours Cycle counter for regular servicing 32-bit processor with USB connectivity for software updates PC programming for advanced adjustments and real-time monitoring Built-in 6 events, 7-day timer with summertime adjustment Programmable inputs and outputs New BUS (2easy) technology compatibility Product Description The FAAC E124 Control Board is designed to provide robust and flexible control for swing gates equipped with 24V motors. This advanced control board supports both standard and complex installations, offering a wide range of programmable parameters to meet specific site requirements. The E124's high level of programmability includes 10 standard logics that can be customized, 50 power levels, and 10 speeds that can be varied independently. The control board features powerful motor outputs, allowing up to 36Vdc to be supplied to FAAC motors, resulting in higher speeds compared to other 24V boards. Safety and compliance are ensured through the management of limit switches and encoders, and the anti-crushing device conforms to European Directives, eliminating the need for a safety edge. Advanced features include an ultra sense function for obstacle detection, a hold closed function, and a cycle counter that tracks usage for maintenance purposes. The 32-bit processor platform allows for future software developments, which can be uploaded via a USB connector. PC programming facilitates access to all installation parameters, real-time system monitoring, and password protection options. The E124 control board is equipped with a built-in 6 events, 7-day timer, programmable inputs and outputs, and X-com technology for remote PC communication. The board's adjustable deceleration times, speed settings, and anti-wind feature ensure optimal operation in various conditions. Technical Specifications Power Supply: 24V Motor Compatibility: FAAC 24V swing gate systems and other brands Processor: 32-bit with USB connectivity Safety Features: Anti-crushing device, obstacle detection, hold closed function Programming: 10 standard logics, 50 power levels, 10 speeds, PC programming Timer: Built-in 6 events, 7-day timer Connectivity: BUS (2easy) technology, X-com technology What's in the Box: 1 x FAAC E124 Control Board Installation manual and hardware FAAC - Simply automatic. Order before 2pm for next working day delivery, subject to stock availability.

CAME 002ZA3N | Multifunction Panel with Built-In Radio Decoder | 24V

Product Overview The CAME 002ZA3N is a versatile multifunction control panel designed with an integrated radio decoder. This advanced control panel operates at an operational voltage of 24V, making it suitable for a variety of gate automation systems. The CAME 002ZA3N ensures reliable performance and simplifies the control of gate devices and accessories. For a safe and efficient installation, it is essential to have all necessary tools and materials and to follow the provided pre-assembly and assembly instructions carefully. Key Features Multifunction control panel for versatile applications Built-in radio decoder for seamless integration Operational voltage of 24V for compatibility with various systems Product Description The CAME 002ZA3N multifunction panel is an essential component for modern gate automation systems. Designed with a built-in radio decoder, this panel offers enhanced functionality and ease of use. The 24V operational voltage ensures it is compatible with a wide range of control devices and accessories, providing a comprehensive solution for gate automation needs. Installation of the CAME 002ZA3N is straightforward, but it is crucial to have all the required tools and materials on hand and to adhere strictly to the pre-assembly and assembly instructions provided. This ensures not only the optimal performance of the panel but also the safety and reliability of the entire automation system. The multifunction capabilities of this control panel make it a valuable addition to any gate automation setup, offering users the ability to manage and control their gate systems efficiently. The integrated radio decoder simplifies the setup process and enhances the panel's overall functionality, making it a preferred choice for many residential and commercial applications. Specifications Operational Voltage: 24V Control Type: Multifunction panel Built-in Features: Radio decoder

CAME Multifunction control panel ZM3ES Max one 230-400 V AC 3-phase motor

CAME ZM3ES | Control Panel For A Superfrog The CAME-ZM3ES is a control panel for a Superfrog. This product has been designed to be a multifunctional control panel which has been manufactured for compatibility with swing gates. Please refer to the dimensions below for the product specifications. FEATURES Control Panel SPECIFICATIONS: Designed For A Superfrog DIMENSIONS 543mm (height) x 353mm (width) x 133mm (depth)